LED. surface/ direct. direct

Transcription

1 Alumina surface/ in suspended /in / in LAMPING OPTIONS AT A GLANCE: asymm. The ALUMINA series by is a line of extruded aluminum rectilinear luminaires. The is a /8 wide housing with a 7/8 aperture. Multiple mounting RECESSED/ SURFACE/ configurations are available including various suspended types as well as wall mounted. ALUMINA can be lamped with lamps, as well as. RECESSED/ SUSPENDED SURFACE/ / / IN IN IN IN ALSO AVAILABLE IN ASYM SU RECE DIREC I ORDERING CODE DISTRIBUTION PROFILE LAMPING SIELDING MOUNTING LENGT VOLTAGE FINIS OPTION OPTION OPTION SAD Direct In D* Direct/In * Not available on profile. D-6 / / x / height 4 4 / height 6 6 / height lm/ft 6.5 input watts/ft* lm/ft 9.5 input watts/ft* *assumes 4000k w/ satin lens Lumen Multiplier = % of 4000K Consult factory for limitations JOB: Custom Output (40 lm/ft-50 lm/ft) 7 700k temp 9.5% special order option 0 000k temp 95.% 5 500k temp 96.8% k temp 00% k temp 0% SAT Satin Lens WOL White Opal Lens CAL* Clear Acrylic Lens WOP White Opal over Parabolic Baffle SAP Satin Lens over Parabolic Baffle * Available in only In Direct In Direct lm/ft temp lm/ft temp lm/ft temp D-6 TYPE: Stem Mount * C Cable Mount * T8 S 5 Surface Mount 5 W Wall Bracket Mount *Spec. cable / stem length: Available in SAD (Direct) T 5 ONLY Spec. run length: Standard run length in even foot increments. Individual units cannot be joined in field to create runs. 0V 77V T 5 O UNV Universal W White SV T8 Silver BK Black CC Custom Color SF Seam-Free End MR T 8 O 7W MAX MR Module (see addendum for calculation specs) 90 CRI 90 CRI EM battery pk SW Separate Switch EC Emergency Circuit F Fusing DIMMING OPTIONS Provide custom 0 color RAL#: 0 D0V DLA 0-0V dimming Lutron i-lume % -wire % power class driver (0V forward phase only) DLA I G T8 surface/ T8 T8 T 5 O I G T 8 O I G T8 I G in surface/ DLA5 Lutron i-lume % -wire Lutron i-lume % EcoSystem driver driver T8 T8 O O O DLE5 DLE55 Lutron i-lume %- EcoSystem driver with soft-on, driver Lutron 5-Series EcoSystem Fade-to-Black DALI Digitally Addressable Lighting Interface T T 85 I G T8 O suspended /in I G T8 DIM Dimming in Please specify dimming manufacturer/model (if required) I G T8 / in T 8 I G asymm s recess dir direc OPTIONS D-4 PROFILE DRAWINGS SPECIFICATIONS D-4 LISTING All fixtures bare an AFL-CIO/IBEW union label and are UL listed for SAD- D-6 SAD- surface mounting and damp location rated. D-6 For alternative environmental 6 / w 6 / certifications, please consult factory. Profile: DRIVER 0V, 77V, and Universal Voltage available standard. Five year 4 / 4 / D-4 / warranty. Please consult factory for special driver requirements. D-4 h Options: / SIELDING Satin frosted and white opal lenses are snap in. Parabolic baffles SAD, SAD- are made from high quality aluminum and come in a variety of finishes. 6 / 6 MOUNTING The Alumina fixture can be mounted in various / D-6 orientations 7 /8 Profile: 4 D-6 7 /8 7 /8 7 / including 7 / wall mount, cable mount, 7 / stem mount, and surface mount. /8 /8 /8 5 / 4 Please / 4 / h Options: see 5 / supplemental documentation 5 / / for mounting details. SAD,, D D-4 OUSING Consists of a single solid 606- extruded alloy profile. Built in D-4 individual pieces up to ft in length. Individual fixtures cannot be joined in Profile: 6 SAD- field to form continuous runs. Fixtures longer SAD- than ft must be ordered as 7 /8 7 /8 continuous runs. 7 /8 7 / 7 / h Options: 6 / SAD-4 /8 /8 6 / GEARTRAY / REFLECTOR /8 Integrated geartray and 5 / reflector made from 5 / SAD,, 4 /.040 aluminum in a pre-paint white 4 finish. / Fully wired unit remains / completely accessible from below via ballast panel. / END FITTING Applied end fitting is a standard.75 machined aluminum / piece with concealed fasteners. 4 / SYSTEM Forum utilizes a tunable 4 / system capable of supplying 7 /8 7 /8 D-44 7 /8 6 / between 7 / lumens per 7 / SAD-4 foot. To specify specific 7 / lumen output other /8 /8 /8 than 5 / standard 950 or 650, 5 drop / the last digit of the 5 / per foot lumen output 6 / * Forum reserves the right to change this information at any time. UPDATED 06//7 desired, i.e. 400lm/ft.= 405 Dimensions provided as general information. Please see shop drawings for specific rough-in dimensions. 4 / Forum, Inc. 00 Chapel arbor Dr. Pittsburgh, Pennsylvania 58 T: (4) / / F: (4) / S

2 Alumina (4) SAD- SAD-4 Alumina 7/8 D-6 Alumina 7/8 w w /8 D-4 Profile: 4/ D-6 h 4/4 4 / 7/ 5/ 7/ 7/8 75/ /8 / 5/ 4/ 7/6 7/8 5/6 /8 Profile: 4 Profile: 44 Profile: 46 Options:SAD,, D, ASY, ASY SAD-4 D-4 D-44 D-4 D-4 SAD-4 SAD- SAD / /8 /8 /8 4/ /8 /8 /8 7/8 7/8 7/ /8 /8 5/ 4/ 7/8 5//8 / 4/4 / 4/6 Profile: SAD-4 D-6 D-4 6 / SAD- h 4/ 7/8 /8 7/8 /8 4 / 4/ D-4 5/ 6 / 4/ 7/8 /8 SAD- D-6 4/ 4/ 7/ 5/ SAD-4 D-4 SAD- 66//4 5/ 7/8 /8 7/ 7/ 4/ 5/ 5/ 7/ 5/ 4/ 7/ 5/ 5/ SAD- 4/ 5/ Profile: 66 5 / Options: SAD,, D, ASY / D-4 5/ 5/ 6 / 54/ /, D, ASY Options: SAD, Profile: 64 SAD-4 SAD-4 D-6 D-44 5/ 7/ 5/ 7/ 5/ Profile: 6 /4 / 4/ 7 7/8 /6 7/ 7/ 7/8 7/ 7/7/8 5/65 / 5/ 5// 8 4 / 5/ 5/6 /8 /8 7/ 7/ 5/ 5/ SAD-4 D-4 SAD- SAD- SAD- 44 5/ D-6 D-4 4/ 77/6/8 5//68 5/ D-6 D-6D-6 4/ /4 / Profile: 4 SAD- 7/68 / /8 SAD- SAD- 7/8 /8 77/ / 55//6 5/ Options: SAD,, ASY 7/8 7/8 /8 7/ /8 5/ D-6 4/ 7/ /8 5/ D-4 D-4 Profile: 6 7/8 w SAD-4 SAD- 7/ 5/ 5/ Profile: 4 SAD- 5/ w 4/ Alumina6 7/ Options: SAD, SAD- D-4 Options: SAD,, ASY Options: SAD,D-4 h Alumina4 7/ D-6 D-6 7/8 /8 6 / /8 D-6 Profile: 4/ SAD- D-44 4 / MODULAR EXTRUSION* D-4 7/ 5/ D-4 SAD- DISTRIBUTION OPTIONS D-6 7/ 5/ D-4 D-44 D-4 D-4 SAD-4 SAD- D-6 7/ 5/ 7/8 /8 D /8 /8 7/8 /8 / 5/ 4 5/ 5/ 7/ 5/ 6 / 7/ 5/ 5/ / Extrusion dimensions for fluorescent * Profile drawings show lamping. lamping are identical. Consult factory for asymmetric configuration KEY D-44SAD - - IN D - /IN SAD-4 5 / ASY - ASYMMETRIC SAD-4 5/ 5/

3 Alumina (4) LAMPING AND DISTRIBUTION OPTIONS SINGLE PIECE EXTRUSION Alumina Alumina58 Alumina 6 Profile Dimensions: w x h Profile Dimensions: 8 w x.5 h Profile Dimensions: w x h /8 / /8 8 /8 KEY SAD - - IN D - /IN ASY - ASYMMETRIC DISTRIBUTION D Direct/In SAD Direct In D Direct/In with MR downlight option (consult factory)

4 Alumina (4) MOUNTING OPTIONS C Cable Mount W Wall Bracket Mount Stem Mount S Surface Mount (available in SAD only) STAGGERED FLOURESCENT LAMP ARRANGEMENT S S

5 Alumina (4) ADDITIONAL INFORMATION CORNER OPTIONS 90 * CORNER MR CORNER * Custom angles available, up to 90. Greater than 90, consult factory. JOINING ARDWARE A A Joining Pin B B A Set Screws SIELDING OPTIONS LENS DETAIL Satin frosted, white opal, and clear acrylic lenses are snap in. An open configuration without shielding is the default.

6 MR ADDENDUM WORKSEET JOB: TYPE: REQUIRED INFORMATION. Row Length: Nominal Exact Length. If nominal, is there a minimum or maximum length?. If linear lamps are included, are different lamp lengths tolerable within a row? (ie: two ft lamps & one 4ft lamp) 4. Enter total quantity of MR modules in row: 5. Choose MR transformer voltage: 0v 40v 77v 47v 480v 6. Choose lamp wattage: 0W 5W/7W Chip Onboard Replacement Lamp 7. See standard configurations below and choose desired lamp information. Or use sketch area to indicate MR quantities, placement, lengths, and single, dual or staggered lamping. specify type 8. Indicate if MRs are on a separate switch or separate circuit from linear sections: STANDARD CONFIGURATIONS MR s ONLY MR CORNER MR s CENTERED IN LINEAR ROW Single modules separated by will be approximately in length. Each additional adjacent module will add. All precise module lengths will be determined by factory to accommodate ceiling type and proper ventilation. LAMPING CENTERED IN MR s SKETC AREA