ATTACHMENT. to ISO 9001:2008 certificate of approval No N dated 9 January 2018, expiring on 14 September 2018 issued to: Fondinox S.p.A.

Transcription

1 to ISO 9001:2008 certificate of approval No N dated 9 January 2018, expiring on 14 September 2018 issued to: Fondinox S.p.A. Via Marconi 42/48, Sergnano (Cremona) Italia The Quality Management System supports the requirements of Annex I, chapt. 4.3 of DIRECTIVE 2014/68/EU Gilles Bessiere Issued by: Lloyd s Register Quality Assurance Italy Srl Current Issue Date: 9 January 2018 Expiry Date: 14 September 2018 Certificate Identity Number: PED Original Approvals: PED 19 December 1996 Approval Number(s): PED The application of the requirements of 2014/68/EU Directive, attachment I, chapt 4.3 is referred to the manufacturing of: up to 9 TUBES up VERTICAL up to 32 and Page 1 of 7

2 made in: EN CARBON STEEL AND LOW ALLOYED STEEL WCA WCB WCC LCA NORMALIZED, NORMALIZED AND TEMPERED, STRESS RELIEVED,, AGED up to 32 and ASTM A216 ASTM A352 LCB LCC LC1 LC2 LC3 MARTENSITIC STAINLESS STEEL EN ASTM A352 A743 A747 AISI 410 ASTM A426 LC4 LC CA15 CA40 CA6NM CB7Cu-1 CPCA15 NORMALIZED, NORMALIZED AND TEMPERED, STRESS RELIEVED,, AGED up to 32 and Page 2 of 7 Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Issued by: Lloyd's Register Quality Assurance Italy Srl, Via Cadorna, Vimodrone Italy for and on behalf of:1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom Page Page 2 of 7

3 EN AUSTENITIC STAINLESS STEEL ASTM A351 A743 A744 AISI 304, 304L, 316, 316L, 317, 317L, 347, CF3 CF8 CF3M CF8M CF8C CF10 CF10SMnN CG3M CG8M to 5000mm of length and 4 up to 32 and CG6MMN CK20 CPF3 ASTM A451 CPF8 CPF3M CPF8M SUPERAUSTENITIC STAINLESS STEEL ASTM A351 CPF8C CT15C CK3MCuN CN3MN CN7M to 5000mm of length and 4 up to 32 and Page 3 of 7

4 DUPLEX STAINLESS STEEL EN ASTM A890 A995, AISI CD4MCu CD4MCuN CD3MCuN CE8MN CD6MN CD3MN up to 32 and CE3MN CD3MWCuN NICKEL-BASE ALLOYS DIN ASTM A494 A CZ100 M25S M30C M30H M35-1 M35-2 CY40 CU5MCuC CW2M, AGED up to 32 and CW6MC CW12MW CX2MW CX2M Page 4 of 7

5 NICKEL-BASE ALLOYS ASTM A494 A990 N3M N7M N12MV, AGED AND - up to 9 - TUBES up to 5000mm of length and 4 - VERTICAL up to 32 and Page 5 of 7

6 EN HEAT RESISTANT ALLOYS HC HD AS-CAST, up to 32 and 4 tons HF HH HI ASTM A297, AISI 308, 309, 310, 330, 331, 446 HK HL HN HP HT HU HW ALLOYS FOR NUCLEAR APPLICATIONS RCC-M M3402 HX Z3 CND M up to 32 and 4 tons Page 6 of 7

7 316HP FONDINOX S.p.A. 316LHP ALLOY 25-5LC ALLOY 25-5Cu SAF 2304 VIK STEELS SAF 2205 SAF RK65 ALLOYS PRODUCED UNDER ORIGINAL LICENSE OUTOKUMPU OY Sanicro SMO 654SMO 153MA 253MA 353MA Hastelloy C-276 Hastelloy C-4 up to 32 and Hastelloy C-22 Hastelloy B-2 HAYNES INTL. INC. Hastelloy G-3 Hastelloy G-30 Hastelloy C-2000 Hastelloy B-3 Hastelloy C-22HS Hastelloy G-35 Attachment n PED Current Issue Date: 9 January 2018 Lloyd s Register Quality Assurance Italy Srl Page 7 of 7