08/09 Series 5 x 8 Solid PLUS

Transcription

1 3(6) (2) 3(3) 3(3) 08/09 Series 5 x 8 Solid PLUS included at no extra charge B (4) 1(4) 1.219(4) Core Plan View Cavity Plan View Pry Slots.510 I.D..510 ½x2½ Snap Ring.375 Return Pin FTS X FTS X FTS X FTS X Features: Clamp Slots rather than Ears in Solid Units for greater Clamping Stability and Larger Cavities and Cores Compatible with M.U.D. TM Style U Frames A & B Plates #3 Steel / All Others #2 Steel For Sleeve Ejector Plate Sets see page B15

2 3(3) 3(3) 3(6) (2) 3.563(2) 2(2) B2 included at no extra charge 08/09 Series 5 x 8 Laminated PLUS 1.969(2) 1(4) 1.219(4) 1.969(2) Core Plan View Cavity Plan View Air Vents O.D. Tubular Dowel Pry Slots I.D. 5/16-18 Air Vents ½ x 2-1/2.375 Return Pin Features: Compatible with M.U.D. TM Style U Frames A & B Plates #3 Steel / All Others #2 Steel For Sleeve Ejector Plate Sets see page B15 FTL X

3 (2) 08/09 Series 5 x 8 Solid included at no extra charge B (2) 1(4) 1.969(2) 3(2) Core Plan View Cavity Plan View Pry Slots.510 I.D..510 ½x2½ FTS FTS FTS FTS FTS FTS FTS /8 3AS /8 3AS /8 3AS /8 3BS /8 3BS /8 3BS RETAINER 1/2 2ER EJECTOR 1/2 2EP * ADD G TO END OF EJECTOR RETAINER AND EJECTOR S TO OMIT GUIDED EJECTION I.E. 2ER G For Sleeve Ejector Plate Sets see page B15

4 3(2) (2) 3.563(2) 2(2) B4 included at no extra charge 08/09 Series 5 x 8 Laminated (2) 1(4) 1.969(2) Core Plan View Cavity Plan View O.D. Tubular Dowel Air Vents Pry Slots I.D. 5/16-18 Air Vents ½ x 2-1/ /8 3AL /8 3AL /8 3AL /8 3BL /8 3BL /8 3BL SUPPORT 3/4 2SP RETAINER 1/2 2ER EJECTOR 1/2 2EP * ADD G TO END OF EJECTOR RETAINER AND EJECTOR S TO OMIT GUIDED EJECTION I.E. 2ER G For Sleeve Ejector Plate Sets see page B15 A B FTL FTL FTL FTL FTL FTL FTL

5 (2) 3.563(2) (2) 2(2) /09 Series 7.85 x 9 T-Style included at no extra charge B (2) 3.343(2) 1(4) Core Plan View Cavity Plan View O.D. Tubular Dowel Pry Slot I.D. 5/16-18 ½ x2-1/ FTT FTT FTT FTT FTT FTT * ADD G TO END OF EJECTOR RETAINER AND EJECTOR S TO OMIT GUIDED EJECTION I.E. 2ER G 1 3AT /4 3AT /2 3AT /8 3AT BT /4 3BT /2 3BT /8 3BT SUPPORT 3/4 2SP RETAINER 1/2 2ER EJECTOR 1/2 2EP

6 (2) B6 included at no extra charge 08/10 Series 5 x 9 Solid 1(4) 1.969(2) 1.969(2) (2) Core Plan View Cavity Plan View Pry Slots.510 I.D..510 ½x2½ /8 3AS /8 3AS /8 3AS /8 3BS /8 3BS /8 3BS RETAINER 1/2 2ER EJECTOR 1/2 2EP * ADD G TO END OF EJECTOR RETAINER AND EJECTOR S TO OMIT GUIDED EJECTION I.E. 2ER G FTS FTS FTS FTS FTS FTS FTS /02/RB

7 (2) (2) 4 4 2(2) /10 Series 5 x 9 Laminated included at no extra charge B (2) 1(4) (2) (2) Core Plan View Cavity Plan View Air Vents O.D. Tubular Dowel Pry Slots I.D. 5/16-18 Air Vents ½ x 2-1/ FTL FTL FTL FTL FTL FTL FTL /8 3AL /8 3AL /8 3AL /8 3BL /8 3BL /8 3BL SUPPORT 3/4 2SP RETAINER 1/2 2ER EJECTOR 1/2 2EP * ADD G TO END OF EJECTOR RETAINER AND EJECTOR S TO OMIT GUIDED EJECTION I.E. 2ER G

8 (2) 4.063(2) (2) B8 included at no extra charge 08/10 Series 7.85 x 9 T-Style (4) (2) Core Plan View Cavity Plan View I.D. Tubular Dpwel Pry Slot I.D. 5/16-18 ½ x 2-1/ AT /4 3AT /2 3AT /8 3AT BT /4 3BT /2 3BT /8 3BT SUPPORT 3/4 2SP RETAINER 1/2 2ER EJECTOR 1/2 2EP FTT FTT FTT FTT FTT FTT * ADD G TO END OF EJECTOR RETAINER AND EJECTOR S TO OMIT GUIDED EJECTION I.E. 2ER G

9 3(2) (2) /90 Series 6.5 x 8 Solid included at no extra charge B (2) 2.375(4) 2.594(2) Core Plan View Cavity Plan View Pry Slots I.D..510 ½x2½ FTS FTS FTS FTS FTS FTS FTS /8 3AS /8 3AS /8 3AS /8 3BS /8 3BS /8 3BS RETAINER 1/2 2ER EJECTOR 1/2 2EP * ADD G TO END OF EJECTOR RETAINER AND EJECTOR S TO OMIT GUIDED EJECTION I.E. 2ER G

10 3.250 B10 included at no extra charge 3(2) 3.250(2) 3.625(2) 84/90 Series 6.5 x 8 Laminated (2) (2) 2.594(2) 2.375(4) 2.594(2) Core Plan View Cavity Plan View O.D. Tubular Dowel Air Vents Pry Slots.625 I.D. 5/ Air Vents ½ x 2-1/ /8 3AL /8 3AL /8 3AL /8 3BL /8 3BL /8 3BL SUPPORT 1 2SP RETAINER 1/2 2ER EJECTOR 1/2 2EP FTL FTL FTL FTL FTL FTL FTL * ADD G TO END OF EJECTOR RETAINER AND EJECTOR S TO OMIT GUIDED EJECTION I.E. 2ER G

11 (2) (2) /90 Series 8.4 x 9 T-Style included at no extra charge B (2) (2) 2.375(4) (2) 3.544(2) Core Plan View Cavity Plan View O.D. Tubular Dowel Pry Slot.625 I.D. 5/16-18 ½ x 2-1/ FTT FTT FTT /4 3AT /2 3AT /8 3AT /4 3BT /2 3BT /8 3BT SUPPORT 3/4 2SP RETAINER 1/2 2ER EJECTOR 1/2 2EP * ADD G TO END OF EJECTOR RETAINER AND EJECTOR S TO OMIT GUIDED EJECTION I.E. 2ER G

12 (2) (3) (3) B12 included at no extra charge 10/12 Series 7 x 10.9 Solid (4) (4) 2.844(4) Core Plan View Pry Slot Cavity Plan View I.D. ½x31/ /8 3AS /8 3AS /8 3BS /8 3BS RETAINER 1/2 2ER EJECTOR 1/2 2EP FTS FTS FTS FTS * ADD G TO END OF EJECTOR RETAINER AND EJECTOR S TO OMIT GUIDED EJECTION I.E. 2ER G

13 (2) 3.312(2) (3) 3.312(2) /12 Series 7 x 10.9 Laminated included at no extra charge B (2) 2.844(4) (4) 2.844(4) 2.875(2) Core Plan View Cavity Plan View 4.812(3) 5.062(2) Pry Slots Air Vents.625 I.D. O.D. Tubular Dowel 5/16-18 ½ x3-1/ Air Vents FTL FTL FTL FTL /8 3AL /8 3AL /8 3BL /8 3BL SUPPORT 1 2SP RETAINER 1/2 2ER EJECTOR 1/2 2EP * ADD G TO END OF EJECTOR RETAINER AND EJECTOR S TO OMIT GUIDED EJECTION I.E. 2ER G

14 B L Leader Pins H PF GENERAL DIMENSIONS NOMINAL DIAMETER D PF H 1/ / D D FL FL FL FL FL /2 2 FL FL FL FL L D FL FL FL FL FL /8 2 FL FL FL FL L.187 L L1 s H I.D. O.D. NOMINAL DIAMETER GENERAL DIMENSIONS I.D. O.D. H L1 1/ / D FB-50-07,77 FB FB FB /2 FB FB FB FB L D FB-62-07,77 FB FB FB /8 FB FB FB FB L Support Pillars L C BORED FOR D D FZ /4 FZ /4 3 FZ FZ FZ /4 FZ /4 3 L

15 Oillite G.E. B FE Socket Head Screws 3/4 1/2 3/8-16 L FSB /16 L 5/8 FSB /4 Tubular Dowel s.344 1/2 PIN OR BUSHING DIA TD5-437 HO-75 3/4.437 HO-87 7/8 HO /8 Sleeve Ejector Plate Sets W1 W2 L R H R D T 1SE Mild Steel W1 L R W2 T E D H

16 B16 Aluminum Mold Bases Aluminum molds are 1/3 the density of steel molds for easier handling and lower freight costs Machined, EDM and polished considerably faster Electrodes with reduced current and spark gap can be used resulting in improved surface finishes Aluminum heat transfer qualities promote faster cycle times Can be ground, weld and textured Mold Bases are supplied fully machined with 4 leader pins & bushings, screws, key plates and an ejector set (supplied unassembled) Aluminum Alloy HD Tensile Strength N / sq mm Hardness Brinell No. 150 Typical Ream holes, especially small diameters, +.01 mm to +.02 mm oversized When installing leader pins & bushings, lubricate the press fit to eliminate potential bonding

17 Aluminum Mold Bases (7-7/8) B17 Backing Plate (optional) BP 1961 BP 1962 BP 1963 BP 1964 BP 1965 BP 1966 BP 1967 Quickset Mold Base L1 L2 APPROX. INCHES MM INCHES MM NET WGT. A LB A LB A LB A LB A LB A LB A LB

18 B18 Aluminum Mold Bases (9-7/8) Backing Plate (optional) BP 2461 BP 2462 BP 2463 BP 2464 BP 2465 BP 2466 BP 2467 Quickset Mold Base L1 L2 APPROX. INCHES MM INCHES MM NET WGT. A LB A LB A LB A LB A LB A LB A LB

19 Aluminum Mold Bases (11-7/8) B19 RB 01/07 SPECIFICATION CHANGE Effective immediately the 296 Series will have the following changes: 1.) Catalog # A2965 is no longer available 2.) The 296 Series is now manufactured in a THREE (3) piece ejector housing 3.) The risers are in held in place with M12 S.H.C.S. in the following locations: A2961 / A Capscrews 3.15 from C/L: 1.57 from L 2 (Max). 4.) Additional capscrews are 120mm long. Depth into ejector half is 40mm 5.) Height of B plate is changed from 90mm to 100mm. Overall height of ejector is half is changed from 190mm to 200mm. Quickset Mold Base L1 L2 APPROX. INCHES MM INCHES MM NET WGT. A LB A LB A LB A LB Backing Plate (optional) BP 2961 BP 2962 BP 2963 BP 2964

20