TAPE THICKNESS.003 (0,08) .050 (1,27) Pitch .016 (0,41) Unless otherwise specified, tolerances are ±0.008 (0,20) TAPE.002 (0,05) .

Transcription

1 Surface Mount SERIES 97 Half-Pitch Half the Size of Standard Switches Available in,, 6, 8, and 0 Positions Low Profile Less Mass for Easy Vacuum Pick & Place APPLICATIS Used in any application where space is at a premium such as notebook computers, hand-held radios, industrial control products, CD- ROM drives, cellular base stations and coin changers. Fig. Series 97C DIMENSIS In inches (and millimeters) Top View LENGTH SEE ORDERING INFORMATI Front View.0 (0,6).6 (6,7).77 (,50) Side View THICKNESS.00 (0,08).06 (0,).050 (,7) Pitch.00 (0,0) Unless otherwise specified, tolerances are ±0.008 (0,0).059 (,50).00 (0,76).050 (,7) Pitch.9.9 (7,9) (,90). (6,5) Fig. Series 97R DIMENSIS In inches (and millimeters) Top View A SPECIFICATIS Contact Rating: 5 ma at Vdc switching; 00 ma at 50 Vdc non-switching Contact Resistance: 00 m max, initially Insulation Resistance: 00 M minimum at 00 Vdc Dielectric Strength: 00 Vac for one minute Switch Capacitance: 5pF maximum Contact Arrangement: SPST Life:,000 cycles minimum Operation Force: 500 gf Mechanical Shock: MIL-STD-0F, Method, B, Test Condition A. Gravity: 50G's (peak value), m/sec. Direction and times: 6 sides and times in each direction. Vibration: MIL-STD-0F, Method 0A. Passed 6 hours ( hours in each) of three 97C06SRT.0 (0,6) ORDERING INFORMATI Front View.07 (,0) (,50 0,05).9 (8,).0 (0,6).06 (0,0) Side View.00 (0,05) Unless otherwise specified, tolerances are ±0.008 (0,0) perpendicular planes at a cycle of Hz/ minute. Operating Temperature Range: -0 to Storage Temperature Range: -0 to Materials Base and Cover: UL9V-0 Nylon, black Actuators: UL9V-0 Nylon thermoplastic, white Base Contacts: Alloy copper with gold-plating over nickel Terminals: Brass with gold-plating Tape Seal: Kapton Vapor phase and IR-reflow soldering can be applied. With stands 55 C peak temperature. Series: 97C see fig., 97R see fig. Positions: 0 =.8 (,76), 0 =.8 (6,0), 06 =.8 (8,8), 08 =.8 (,8), 0 =.58 (,9) T= RoHS compliant Packaging: Blank = Tube, R = Tape and Reel (see pkg note) Seal: Blank = Unsealed, S = Top Tape Seal.057 (,).050 (,7) PITCḤ (0,0 0,0) All switches are shipped in the ""..050 (,7) PITCH.00 (0,76) (6,60) (9,0).0 (7,85) Cleaning: Tape sealed versions are capable of withstanding washing processes using alcohol-based solvents only. Water or other water-based solvent washing processes are not recommended. Care should be taken to avoid flux adhering to the switch body from the circuit board soldering process. The switch should be allowed to cool for at least minutes between the end of the solder process and the beginning of the wash process. The solvent stage of the cleaning process is not to exceed minute and the whole wash process is not to exceed minutes. Ultrasonic or pressure wash cleaning is not recommended. Packaging Information Tube: 0 pcs/tube ( s), 75 pcs/tube ( s), 5 pcs/tube (6 s), 0 pcs/ tube (8 s), pcs/tube (0 s). Tape and Reel: 97C:,000 pcs/reel (all s). 97R: 500 pcs/reel (all s). Grayhill, Inc. 56 Hillgrove Avenue LaGrange, Illinois USA Phone: Fax:

2 Surface Mount SERIES 90HB SPST, Low Profile Compatible with SMT Assembly, DIMENSIS In inches (and millimeters) Top View Gull Wing SWITCH IS PACKAGED AS SHOWN HERE WITH ALL POSITIS O N ±.00 (0,5 ± 0,05).05 ±.00 (, ± 0,).085 ±.005 (,6 ± 0,).00 ±.005 C (,5 ± 0,) L Gull Wing.00 (,5).070 (,78) Gull Wing.95 ±.00 (0,0 ± 0,5).90 (7,7).0 ±.00 (0,0 ± 0,05).60 ±.005 (,9 ± 0,).90 (,8) LENGTH ±.00 (0,5) SEE CHART.00 (0,0).500 (,7).50 (6,5).5 (,8) J-Bend J-Bend.0 (8,).90 (7,7).60 ±.005 (,9 ± 0,) LENGTH ±.00 (0,5) SEE CHART.070 (,78).50 (8,90).50 (,8).00 (,5).0 ±.00 (0,0 ± 0,0).50 ±.00 (6,5 ± 0,5).0 (5,59).085 ±.005 (,6 ± 0,).00 ±.00 (0,5 ± 0,05).00 ±.00 (,5 ± 0,5).00 (0,0).00 (,5) As viewed from the top of the switch in the s shown in the drawi Grayhill, Inc. 56 Hillgrove Avenue LaGrange, Illinois USA Phone: Fax:

3 Surface Mount SPECIFICATIS Make-and-break Current Rating:,000 operations per switch at these resistive loads:0 ma, 0 Vdc; or 0 ma, 50 mvdc; 0 ma, 50 mvdc; or 5 ma, Vdc; or 00 ma,6 Vdc. Contact Resistance: (measured at 0 ma, 50 mvdc). Initial: 0 mohms maximum, After Life: 00 mohms maximum Insulation Resistance: Minimum, at 00 Vdc across open switch contacts. Initial (Mohms): 5,000, After Life (Mohms):,000 Dielectric Strength: Minimum voltage (AC RMS) measured between adjacent closed lnitial: 500 volts, After Life: 500 volts Current Carry Rating: A maximum rise of 0 C Switch Capacitance: pf at megahertz Where Grayhill performance is superior, the MIL spec is listed in parentheses. Mechanical Life:,000 operations per switch Vibration Resistance: Per Method 0, Test Condition B, ms opening (0 ms allowed) Mechanical Shock: Per Method, Test Condition A. ms opening (0 ms allowed) Thermal Shock Resistance: Per specification; no failures; passes contact resistance. Thermal Aging:,000 hours at ; no failures. Meets all requirements of MIL- S-850. Operating Temperature Range: -0 C to + Storage Temperature Range: -0 C to + Moisture Resistance: Per MIL-STD-0, Method 06. Solderability: Per MIL-STD-0, Method 08 Soldering Heat Resistance: Per MIL-S-850, six second test. 0 C 0 C ( pass 60 C maximum) with all actuators in the closed (on) as Fluxing: Per EIA RS-8- with flux touching switch body. Cleaning: Passes immersion test using water/ detergent. Acceptable solutions include -- trichlorethane, freon, (TF, TE, or TMS), isopropyl alcohol, detergent (0 F maximum). Terpene acceptable for Series 90 only. Solutions which are not recommended include acetone, methylene chloride, freon TMC. High pressure aqueous cleaning is not recommended. Shorting Member (Ball): Brass, gold-plate Base Contacts: Copper alloy, gold-plate Terminals: Copper alloy, matte tin plated over nickel barrier. Non-Conductive Parts: Thermoplastic (UL9V- O) Tape and Reel Packaging Tape Seal Integrity: Passes gross leak test using 5 C flourinert for 0 seconds minimum. Reference MIL-STD-0, Method Tape Seal: Polyimide film AND REEL PACKAGING Meets requirements of EIA 8- or EIA 8- INCH CDUCTIVE ORDERING INFORMATI 90HBW0PRT Series Terminal Style: W = Gull Wing, J = J-Bend RoHS compliant DIRECTI 6mm mm Packaging: R = Tape and reel packaging (750 switches/reel) Blank = Tube packaging (each tube is 9.5" long) Seal: P = Polyimide Seal Blank = No Seal Number of Positions: 0 through 0 No. of Length Length Number Positions Inches Metric Per Tube.70" 6,9 mm 60.70" 9, mm 7.70",9 mm ",5 mm 6.670" 7,0 mm " 9,6 mm 8.870", mm ",6 mm " 7, mm 6 6mm PIN E LOCATI & mm Each reel has a inch (90 mm) minimum leader and a 6.0 inch (60 mm) minimum trailer. Available from your local Grayhill Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor or Grayhill. 6 Grayhill, Inc. 56 Hillgrove Avenue LaGrange, Illinois USA Phone: Fax:

4 Surface Mount SERIES 78H SPDT and DPST Compatible with SMT Assembly DIMENSIS In inches (and millimeters) SPDT, DPST, Top Actuated, Slide Operated.055 ±.00 (,0 ± 0,5).0 (5,8) REF..80 ±.00 (9,65 ± 0,5).05 (0,6) R..68 ±.00 (6,8 ± 0,5) LENGTH ±.00 (0,5) SEE ORDER INFO.50 (,6).80 (7,).0 ±.00 (0,0 ± 0,0).0 ±.05 (7,70 ± 0,8). ±.05 (0,77 ± 0,8).00 ±.005 (,5 ± 0,) (7,9 0,5).070 (,78).00 (,5) SPDT Circuits (no common) DPST SPECIFICATIS Make-and-break Current Rating:,000 operations per switch at ma, 5 Vdc; 50 ma, 0 Vdc; or 50 ma, 0 Vdc Contact Resistance: Initial: 0 mohms max. After Life: 00 mohms max. (0 ma at 50 Vdc, open circuit) Insulation Resistance: Minimum, at 00 Vdc across open switch contacts. Initial:,000 Mohms; After Life:,000 Mohms Dielectric Strength: Minimum voltage (AC, RMS) measured between adjacent closed Initial: 750 volts; After Life: 500 volts Current Carry Rating: amps, maximum rise of 0 C Switch Capacitance: pf at megahertz Mechanical Life:,000 operations per switch Vibration Resistance: Per method 0, Test Condition B. ms opening (0 ms allowed) Mechanical Shock: Per Method, Test Condition A. ms opening (0 ms allowed) OFF ORDERING INFORMATI: Tube Packaging Dot indicates active circuit. Thermal Aging:,000 hours at ; no failures Thermal Shock: Per specification; no failures; passes contact resistance Meets all requirements of MIL- S-850. Where Grayhill performance is superior, the MIL spec is listed in parentheses. Operating Temperature Range: -0 C to + Storage Temperature Range: -55 C to + Moisture Resistance: Per MIL-STD-0, Method 06 Solderability: Per MIL-STD-0, Method 08 Soldering Heat Resistance: Per MIL-S-850, six second test 0 C 0 C ( pass 60 C maximum) with all actuators in the closed (on) as No. of Length Length Carrier Width Part Number* Positions (inches) (metric) Dim. A SPDT DPST 0.80" 7, mm mm 78HJ0GWT 78HF0GWT 0.80", mm mm 78HJ0GWT 78HF0GWT 0.680" 7, mm mm 78HJ0GWT 78HF0GWT 0.880", mm mm 78HJ0GWT 78HF0GWT 5.080" 7, mm mm 78HJ05GWT 78HF05GWT * Insert "R" before the "T" in the Grayhill part number for tape and reel packaging (500 switches/reel). Available from your local Grayhill Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor or Grayhill. 7 Shorting Member: Brass, gold-plated Base Contacts: Copper alloy, gold-plated Terminals: Copper alloy, matte tin-plated over nickel barrier. Non-Conductive Parts: Cover is natural color thermoplastic, actuators are white thermoplastic (UL9V-O) AND REEL PACKAGING Meets requirements of EIA 8- or EIA 8- COVER INCH DIM. A (SEE ORDER INFO.) Grayhill, Inc. 56 Hillgrove Avenue LaGrange, Illinois USA Phone: Fax: mm 6mm PIN E LOCATI CDUCTIVE DIRECTI 6 & mm & mm Each reel has a inch (90 mm) minimum leader and a 6.0 inch (60 mm) minimum trailer.

5 76HPSB 76HPSB 76HPSB Surface Mount SERIES 76HP Side Actuated PIANO- Compatible with SMT Assembly Easily Accessed when PC Boards are Racked DIMENSIS In inches (and millimeters).05 ±.00 (7,75 ± 0,5) LENGTH ±.00 (0,5 SEE ORDER INFO.00 ±.005 (,5 ± 0,).055 ±.00 (,0 ± 0,5).0 (5,8) REF..0 ±.00 (0,0 ± 0,0).80 ±.00 (9,65 ± 0,5).05 (0,6) R..0 ±.05 (7,70 ± 0,8). ±.05 (0,77 ± 0,8) `.50 (,6).80 (7,).070 (,78).00 (,5) As viewed from the top of the switch in the s shown in the drawing. SPECIFICATIS Make-and-break Current Rating:,000 operations per switch at ma, 5 Vdc; 50 ma, 0 Vdc; or 50 ma, 0 Vdc Contact Resistance: Initial: 0 mohms maximum; After Life: 00 mohms maximum (0 ma at 50 Vdc, open circuit) Insulation Resistance: Minimum, at 00 Vdc across open switch contacts. Initial:,000 Mohms Dielectric Strength: Minimum voltage (AC RMS) measured between adjacent closed Initial: 750 volts; After Life: 500 volts Carry Rating: 5 amps, maximum rise of 0 C Switch Capacitance: pf at megahertz Mechanical Life:,000 operations per switch Vibration Resistance: Per Method 0, Test Condition B. ms opening (0 ms allowed) Mechanical Shock: Per Method, Test Condition A. ms opening (0 ms allowed) Thermal Shock Resistance: Per specification; no failures; passes contact resistance Thermal Aging:,000 hours at ; no failures Meets all requirements of MIL- S-850. Where Grayhill performance is superior, the MIL spec is listed in parentheses. Operating Temperature Range: -0 C to + Storage Temperature Range: -55 C to + Moisture Resistance: Per MIL-STD-0, Method 06 Solderability: Per MIL-STD-0, Method 08 Tested to EIA Standard RS-8-. Resistance to Soldering Heat: Per MIL-S- 850, six second test 0 C 0 C ( pass 60 C maximum) with all actuators in the closed (on) as Shorting Member: Brass, gold-plated Base Contacts: Copper alloy, gold-plated, Terminals: Copper alloy, matte tin plated Non-Conductive Parts: Cover is natural color thermoplastic, actuators are white thermoplastic (UL9V-O) Tape Seal: Not available with Tape Seal. AND REEL PACKAGING Meets requirements of EIA 8- or EIA 8- DIRECTI 6mm INCH CDUCTIVE 6 & mm ORDERING INFORMATI: Tape and Reel Packaging (500 switches per reel) No. of Length Length Carrier Width Part Positions* (inches) (metric) Dim. A Number 0.80" 7, mm mm 76HPSB0GWRT 0.80", mm mm 76HPSB0GWRT " 7, mm mm 76HPSB06GWRT ", mm mm RT 0.080" 7, mm mm 76HPSB0GWRT * For other lengths, contact Grayhill, Inc. Available from your local Grayhill Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor or Grayhill. 6mm PIN E LOCATI COVER DIM. A (SEE ORDER INFO.), & 56mm Each reel has a inch (90 mm) minimum leader and a 6.0 inch (60 mm) minimum trailer. Grayhill, Inc. 56 Hillgrove Avenue LaGrange, Illinois USA Phone: Fax: