Low/Medium Capacity Rockers Series SW

Transcription

1 Low/Medium Capacity ockers Series SW GENEAL SPECIFICATIONS FO SW000s (esistive & Inductive Load) Other atings Power Level: Shown in the following tables Contact esistance: 0 milliohms maximum Insulation esistance: 00 megohms 00V for SW & SW6,000 megohms 00V for SW00A ~ SW008A Dielectric Strength:,00V minimum for minute minimum for SW & SW6,000V minimum for minute minimum for SW00A ~ 008A Mechanical Life: 0,000 operations minimum Electrical Life: 0,000 operations minimum Angle of Throw (α): Shown on drawings or following tables Materials & Finishes ocker: Mounting Frame: Case Cover/Insulator: Case: Movable Contactor Plate: Movable & Stationary Contacts: Terminals: Environmental Data Operating Temp ange: Sealing: Polycarbonate for SW; urea resin for all others; all rockers are white. Steel with chromate plating over zinc plating Phenolic resin Phenolic resin for SW & SW6; melamine phenol for SW000s Copper with silver plating Brass or phosphor bronze with silver plating for SW6; silver alloy plus copper with silver plating for all other models Copper with tin plating for SW00 ~ SW008A; Brass, copper, or phosphor bronze with silver plating for SW6 & SW 0 C through +70 C (+ F through +8 F) Dustproof cover of silicone rubber on SW006A, SW007A, & SW008A Installation Maximum Panel Thickness: Shown with following drawings Soldering Time & Temperature: seconds 0 C max. for manual soldering Standards & Certifications V D E UL ecognized: CSA Certified: Designated with UL recognized symbol beside part numbers on following pages See Supplement section to find UL rating details. UL File No. WOY.E Add /U to end of part number to order UL mark on switch. Designated with CSA certified symbol beside part numbers on following pages See Supplement section to find CSA rating details. CSA File No ; Add /C to end of part number to order CSA mark on switch. VDE Approved: SW006A at & ; VDE License No. 989; Add /V to end of part number to order VDE mark on switch. NKK Switches sales@nkkswitches.com Phone (80) Fax (80)

2 Low/Medium Capacity ockers Series SW SINGLE POLE WITH SOLDE LUG ocker Position/Connected Terminals Down Center Up esistive Inductive SW SPST ON - NONE OFF A.A.A.A SPST Solder lug terminal hole accommodates one -gauge solid or stranded wire. (9.0)..8 (.0).60 (.8).6 (.0) (.0).9 (.).8 (.0) (.).9 (.) Dia.09 (.).0 (.).00 (.).0 (0.0).7 (.0) (.).9 (.0) (.0).60 SW Maximum Effective Panel Thickness.8 (.0mm) SINGLE POLE WITH SOLDE LUG ocker Position/Connected Terminals Down Center Up esistive Inductive α = SW00A SPST ON - NONE OFF A 6A A 0A SW00A SPDT ON - NONE ON - A 6A A 0A SW00A SPDT ON - OFF ON - A 6A A 0A 8 Angle of Throw SPST INTENAL CONNECTION SPDT (COM) Solder lug terminal hole accommodates one -gauge solid or stranded wire. (9.7).8 (.) Dia Typ (8.0).96 (7.0).06 (.).8 α (.8) Typ.89 (0.0).8 (.0).77 (8.0).0 (8.0).96 (.). (.7). (.0) (.). (.7). (8.0).709 (.).7 SW00A Maximum Effective Panel Thickness:.97 (.0mm) for SW00A & SW00A models;.77 (.mm) for SW00A models NKK Switches sales@nkkswitches.com Phone (80) Fax (80)

3 Low/Medium Capacity ockers Series SW DOUBLE POLE WITH SOLDE LUG ocker Position/Connected Terminals Down Center Up esistive Inductive α = SW006A ON - -6 NONE ON - - 0A 0A 0A 0A SW007A ON - -6 OFF ON - - A 6A A 0A 8 SW008A MOM - -6 OFF MOM - - A 6A A 0A Angle of Throw (COM) 6 Solder lug terminal hole accommodates one -gauge solid or stranded wire. (9.6).78 (.) Dia Typ (8.0).96 (7.0).06 (.).8 α (.8) Typ.89 6 (.).8 (.0).77 (8.0).0 (8.0).96 (.). (.9). (.0) (.). (.7). (8.).78 (.).7 SW006A Maximum Effective Panel Thickness:.97 (.0mm) for SW006A & SW008A models;.77 (.mm) for SW007A models DOUBLE POLE WITH SOLDE LUG ocker Position/Connected Terminals Down Center Up esistive Inductive SW6 ON - - NONE ON - -6 A A A A (COM) 6 Solder lug terminal hole accommodates one -gauge solid or stranded wire. (7.).9 (.0) Dia Typ.079 (.8) Typ.0 (0.) Typ (.0).60 (.0) (.0).9 0 (0.) Typ.07 (.0).7 (.) Dia.090 (7.8).09 (0.0).7 (.0) (.0).60 (.8).6 (.0).7 (.0) (9.8).7 (.).7 (7.) (.).9 SW6 Maximum Effective Panel Thickness.8 (.0mm) NKK Switches sales@nkkswitches.com Phone (80) Fax (80)

4 High Capacity ockers Series SW GENEAL SPECIFICATIONS FO SW800s (esistive & Inductive Load) Power Level: Shown in the following tables See Supplement section for details of design for inductive loads. Other atings Contact esistance: Insulation esistance: Dielectric Strength: Mechanical Life: Electrical Life: Angle of Throw: Nominal Operating Force: 0 milliohms maximum,000 megohms 00V,000V minimum for minute minimum 0,000 operations minimum,000 operations minimum Shown on following drawings,800 grams for SW8,00 grams for SW8 Off to On 800 grams for SW8 On to Off Materials & Finishes ocker: Mounting Frame: Case Cover/Insulator: Case: Movable Contacts: Stationary Contacts: Terminals: Urea resin; all rockers are white. Steel with chromate plating over zinc plating Phenolic resin Melamine phenol Copper with silver plating Silver alloy plus copper with silver plating Brass (terminal screws of brass with nickel plating) Environmental Data Operating Temp ange: 0 C through +70 C (+ F through +8 F) Standards & Certifications UL recognition & CSA certification symbols shown on following pages UL File No. WOY.E; CSA File No See Supplement section to find additional details. NKK Switches sales@nkkswitches.com Phone (80) Fax (80)

5 High Capacity ockers Series SW DOUBLE POLE WITH SCEW LUG ocker Position/Connected Terminals Down Center Up esistive Inductive SW8 DPST ON - -6 NONE OFF 0A 0A 0A A 0A A SW8 ON - -6 NONE ON - - 0A 0A 0A A 0A A SW8 ON - -6 OFF ON - - 0A 0A 0A A 0A A SW8D DPST ON - -6 NONE OFF 0A A SW8D ON - -6 NONE ON - - 0A A SW8D ON - -6 OFF ON - - 0A A DPST (COM) 6 (COM) 6 (.).0 (.0) M.x6 (.0).7 (6.0).8 (6.0) (.0) (.0) Typ.7 6 (.0).6 (6.0).0 (.0) (6.7).6 (.).7 (.0).9 SW8 SW8 & SW8D do not have terminals &. Maximum Effective Panel Thickness.77 (.mm) Panel cutout shown below. THEE POLE WITH SCEW LUG ocker Position/Connected Terminals Down Center Up esistive Inductive SW8 PST ON NONE OFF 0A 0A 0A A 0A A SW8 PDT ON NONE ON A 0A 0A A 0A A SW8 PDT ON OFF ON A 0A 0A A 0A A SW8D PST ON NONE OFF 0A A SW8D PDT ON NONE ON A A SW8D PDT ON OFF ON A A PST (COM) PDT (COM) (.).0 (.0) M. x 6 (.) Typ.7.8 (6.0).8 (6.0) (.0) (.0) Typ (.0).6 (6.0).0 (7.0).7 (6.0).8 (.0) (6.7).6 (.).7 (.0).69 (.0) SW8 & SW8D do not have terminals, & 7. Maximum Effective Panel Thickness.77 (.mm) NKK Switches sales@nkkswitches.com Phone (80) Fax (80)