TUFF-SEAL RSSS SERIES STAINLESS STEEL CORD GRIPS. Toll Free Fax

Transcription

1 Selection, Service & Quality Solutions TUFF-SEAL RSSS SERIES STAINLESS STEEL CORD RIPS RSSS Series Stainless Steel Corrosion-Resistant Cord Connectors The Tuff Seal RSSS series of corrosion-resistant cord connectors feature a body and compression nut made of Type 0 stainless steel with exceptional tensile strength and the highest levels of durability in severely corrosive environments filled with saltwater, acids or chemicals. All RSSS connectors include an embedded Viton O-Ring. These connectors are recommended for use in washdowns or high moisture environments in food processing plants, petrochemical facilities, wastewater treatment plants, pulp & paper mills and chemical manufacturing factories. (Note: Type 04 stainless steel available; Type 16 stainless steel also available upon request and minimums may apply.) All RSSS connectors can be ordered with or without wire mesh attachments and accommodate conduit sizes from /8" to 1/". The combination tightening surface on RSSS Corrosion- Resistant Connectors is a unique Remke design that provides a large wrenching area for easy installation. And the knurl section offers users an extra gripping surface for initial hand tightening. NOTES Accessories Locknuts and O-Rings: Pages 18 Special Configurations Special configurations and materials are available. Consult factory. Dimension & certification information on pages -4 & -6 in Tuff-Seal Technical Reference. All wire mesh is stainless steel. For conduit sizes 1 1/4" through 1/" minimum quantities may apply. Consult factory. For dimensions match the Form Size to the chart on page 6 Fax COMPLETE ASSEMBLY PART NUMBERS Conduit Form Cord Cord rip Size (NPT) Size Cable Range rip With Mesh /8" RSSS RSSS-004 RSSS-004-E RSSS-005 RSSS-005-E RSSS-006 RSSS-006-E RSSS-007 RSSS-007-E 1/" /4" RSSS RSSS-104 RSSS-104-E.50.1 RSSS-105 RSSS-105-E.1.75 RSSS-106 RSSS-106-E RSSS-107 RSSS-107-E RSSS-108 RSSS-108-E RSSS-109 RSSS-109-E RSSS-110* RSSS-110-E RSSS-08 RSSS-08-E RSSS-09 RSSS-09-E RSSS-10 RSSS-10-E RSSS-11 RSSS-11-E RSSS-1 RSSS-1-E RSSS-1* RSSS-1-E 1" RSSS-09 RSSS-09-E RSSS-10 RSSS-10-E RSSS-11 RSSS-11-E RSSS-1 RSSS-1-E RSSS-1 RSSS-1-E RSSS-14 RSSS-14-E RSSS-15 RSSS-15-E RSSS-16 RSSS-16-E 1 1/4" RSSS RSSS RSSS RSSS-416 RSSS-416-E RSSS-418 RSSS-418-E RSSS-40* RSSS-40-E RSSS-4* RSSS-4-E 1 1/" RSSS RSSS RSSS RSSS-516 RSSS-516-E RSSS-518 RSSS-518-E RSSS-50 RSSS-50-E RSSS-5 RSSS-5-E " RSSS-6 RSSS-6-E RSSS-65 RSSS-65-E RSSS-67 RSSS-67-E RSSS-69 RSSS-69-E RSSS-679 RSSS-679-E RSSS-671 RSSS-671-E RSSS-67* RSSS-67-E RSSS-675* RSSS-675-E RSSS-677* RSSS-677-E.1.48 RSSS-679* RSSS-679-E 1/" RSSS-79 RSSS-79-E RSSS-71 RSSS-71-E RSSS-7 RSSS-7-E RSSS-75 RSSS-75-E RSSS-77 RSSS-77-E.1.48 RSSS-79* RSSS-79-E *Cable may have to be stripped to pass through the bore of the body NOTICE Suitable for use in corrosive environments 6

2 Fax RSR STRAIHT CORD RIP DIMENSIONS ALUMINUM AND NICKEL-PLATED ALUMINUM Size Size Body Bore Body Dia. Nut Dia. 1 4" " " " " " " " " " " " " " " " " Dimension A is the minimum Body Bore. Other dimensions are nominal. Dimension D is with the Nut snug but Bushing uncompressed. Dimension E is across the Body Hex. corners. NYLON AND VALOX 8" " " STEEL 8" " " " STAINLESS STEEL 8" " " "

3 Selection, Service & Quality Solutions TUFF-SEAL TUFF-SEAL TECHNICAL REFERENCE SECTION STATEMENT Remke Industries supports the European Union s efforts to remove harmful chemicals from electrical products. In compliance with Directive 00/95/EC of the European Parliament and the Council of the European Union regarding the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), Remke Industries certifies either: 1. The maximum concentration values of weight in homogenous materials for the substances referred to in Article 4(1) of directive 00/95/EC that are contained in the products do not exceed the maximum concentration values of 0.1% in respect of lead, mercury, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and 0.01% in respect of cadmium. OR. The product supplied is exempt from this directive. Remke Industries certifies that all products of our manufacture are fully compliant to the current RoHS Directive. ISO CERTIFICATION On July 1st, 00 Remke Industries received ISO 9001 : 000 certification which certifies that Remke is compliant with current ISO standards. Fax OPERATIN TEMPERATURES Material Aluminum Nylon Steel Stainless Steel Neoprene (bushings) Silicone (bushings) Valox Dome-Cap Connectors: Non-Metallic Metallic FLAMMABILITY Temperature range -40 F to +00 F (-40 C to +149 C) -40 F to +5 F (-40 C to +107 C) -60 F to F (-51 C to +57 C) -60 F to F (-51 C to +57 C) -40 F to +50 F (-40 C to +11 C) -150 F to +450 F (-65 C to + C) -40 F to +50 F (-40 C to +11 C) - F to +176 F (-0 C to +80 C) -40 F to +1 F (-40 C to +100 C) Component Rating Mesh rip UL 94HB Fitting UL 94V- Note: Non-metallic cord connectors will not support combustion. APPROVALS, CERTIFICATION & COMPLIANCES Agency File Number Product or Component Underwriters E5599 RSR Series (Straight, 90, 45 ) Laboratories Inc. (UL) RSP Series (Straight, 90 ) RSM Cord rips RSRS Cord rips Canadian Standards 8985 RSR Series (Straight, 90, 45 ) Association (CSA) RSP Series (Straight, 90 ) RSRS Cord rips RSSS Series RSPV Series Teck Cable Connectors National Electrical Articles RSR Series (Straight, 90, 45 ) Code (NEC) Articles RSP Series (Straight, 90 ) RSM Cord rips RSRS Cord rips ROHS & WEE Articles 501-4(B) WH Series Watertight Conduit Hubs Articles 50-4(A) WH Series Watertight Conduit Hubs Articles 50-(A) WH Series Watertight Conduit Hubs All Tuff-Seal and Tuff-Link Products are Compliant HAZARDOUS LOCATIONS Definition Remke Products The Remke products listed are RSR Series (Straight, 90, 45 ) suitable for use in hazardous locations WH Series Watertight Conduit Hubs per Class I, Div., Class II, Div 1 &, RSP Series (Straight, 90 ) and Class III, Div. 1 & RSM Cord rips, RSRS Cord rips KNOCKOUT DIMENSIONS N.P.T. Knockout Hole Recommended Hub Size (Min to Max / Inches) 1/4".540 to.570 /8".671 to.701 1/".859 to.906 /4" to " 1.59 to /4" to /" to.016 ".45 to.500 1/".95 to.000 ".578 to.65 4

4 Fax RATINS/MATERIAL OF CONSTRUCTION IP 54 and IP 54 and IP 65 and IP 56 and IP 67 and IP 5 and Material NEMA NEMA R NEMA 4 NEMA 4X NEMA 6 NEMA 1 Aluminum X X X X X Nickel-Plated Aluminum X X X X X X Steel X X X X X Stainless Steel X X X X X X Nylon X X X X X Valox X X X X X X IP RATINS DEFINITION First Digit 50mm Protection From Solid Objects 0 Non-Protected 1 Protected against solid objects over 50mm e.g hands, large tools Second Digit Protection From Moisture 0 Non-Protected 1 Protection against vertically falling drops of water Protected against solid objects over 1mm 1mm e.g hands, large tools 15 Protection against direct sprays of water up to a 15 angle Protection from entry by solid objects over.5mm.5mm e.g. wire or small tools 60 Protection against direct sprays of water up to a 60 angle 4 Protection from entry by solid objects over 1.0mm 1.0mm e.g. wires or tools 4 Protection against water sprayed from any direction. Limited ingress permitted. 5 Protection against deposits of dust e.g. against equipment damage due to deposits 5 Protection against low pressure water jets from any direction. Limited ingress permitted 6 Total protection against dust ingress e.g. Dust-Tight 6 Protection against high pressure water jets from any direction. Limited ingress permitted. IP CODE EXAMPLE IP54 = IP (IP LETTER CODE), 5 (1st Digit), 4 (nd Digit) 7 Protection against immersion between 15cm and 1M 8 Protection against complete and continuous immersion in water under pressure e.g Water-Tight 5

5 Fax THREAD SPECIFICATIONS P THREAD SPECIFICATIONS Size Diameter (mm) Pitch (mm) Outside Diameter(mm) Pg Pg Pg Pg Pg Pg Pg Pg Pg Pg NPT THREAD SPECIFICATIONS Size Diameter (mm) Pitch (mm) NPT 1/4" NPT /8" NPT 1/" NPT /4" NPT 1".4.1 NPT 1-1/4" NPT 1-1/" NPT " METRIC THREAD SPECIFICATIONS Size Diameter (mm) Pitch (mm) Outside Diameter(mm) M1 x M16 x M0 x M5 x M x M40 x M50 x M6 x