Nominal Thickness (in.) Minimum Thickness (in.) 36.00" " 42.00" " 48.00" "

Transcription

1 HOT ROLLED All coils are sold on actual weight basis EXW producing location and extras listed are per hundredweight. Nucor s standard terms and conditions of sale are applicable. All prices are subject to change without notice. Pricing based on ASTM standards; deviations are subject to price extras. Reference ASTM A568 (current revision) and A635 (current revision) for ASTM s Thickness Tolerance tables. THICKNESS & WIDTH EXTRAS Nominal Thickness (in.) Minimum Thickness (in.) 36.00" " 42.00" " 48.00" " $3.00 $ $3.50 $2.00 $ $4.50 $3.00 $ $5.50 $4.00 $2.50 Ordered width based on mill edge. Not all width/thickness/grade combinations are available. Please inquire about specific items to ensure capability. Due to grade availability and/or scheduling constraints, standard lead times on some items may require a minimum order quantity of one or more heats. STANDARD GRADES ASTM A1011/A1018 Commercial Steel (CS) Drawing Steel (DS) $0.50 SAE J403 C C1010 Modifi ed C C1017 C C1020 $0.25 C1021 $0.50 C1026 $0.50 C1030 $1.50 STRUCTURAL STEEL ASTM A1011/A1018 SS Grade 30 $0.25 SS Grade 33 $0.25 SS Grade 36 Type 1 $0.25 SS Grade 36 Type 2 $0.50 Conversion to A36 $0.50 SS Grade 40 $0.25 SS Grade 45 $0.25 SS Grade 50 $0.75 A1011 SS Grade 55 $1.00 C1035 $1.50 1

2 HOT ROLLED HIGH STRENGTH LOW ALLOY for Class 1, YLF, or YF grades. ASTM A1011/A1018 (Class 2) SAE J1392 SAE J2340 HSLA Grade 45 $ XLF $ XF $2.00 HSLA Grade 50 $ XLF $ XF $2.25 HSLA Grade 55 $ XF $2.75 HSLA Grade 60 $ XLF $ XF $3.50 HSLA Grade 65 $3.75 HSLA Grade 70 $ XLF $ XF $5.00 HSLA Grade 80 $ XLF $ XF $6.00 SPECIALTY about custom grades or modifications to standard grade chemistries. JIS and Euronorm Grades Weathering Steels (A606, A871, Etc.) Dual Phase Grades Copper Added (.20 min copper) $1.50 Rephos/Renitrogenized $1.25 NuStrength Grade 100 Conversion To PVQ - SA414 Grade C & G $1.50 API Grades AR 200 $2.50 PROCESSING EXTRAS Max Nominal Gauge Temper Pass 0.250" or 0.245" min Pickled sheet can be ordered as dry or oiled. *Minimum Thickness Designations **Cut Edge Max Thickness 0.375" < "* " "* " "* Pickled (Mill Edge) $2.00 $1.50 $2.00 Temper Pass $1.00 $1.00 Cut Edge - Hot Band** $1.00 $1.00 $1.00 Cut Edge - Pickle** $0.50 $0.50 $0.50 2

3 HOT ROLLED TESTING/CERTIFICATION HSLA and structural steel grade extras include mechanical properties testing and certification; two coils per heat tested from OD of coils only. Plate specifications are certified for conversion only. All other certifications must be requested if not automatic with ordered spec. Mechanical Properties $0.25 Charpy V-Notch (One Per Heat) $0.25 Additional Testing GENERAL Restricted Width or Thickness Tolerance Restricted Chemistry Restricted Mechanical Properties Export Packaging COIL SIZE AVAILABILITY Coil weights under the stated minimums are subject to the individual mill s acceptance. Hot Band ID = 30" Min PIW Max PIW Max coil weight 705 lbs 1,325 lbs 80,000 lbs Pickled ID = 24" > 24,000 lbs min 20,000 lbs min - 23,999 lbs max $0.50 3

4 COLD ROLLED All coils are sold on actual weight basis EXW producing location and extras listed are per hundredweight. Nucor s standard terms and conditions of sale are applicable. All prices are subject to change without notice. Pricing based on ASTM standards; deviations are subject to price extras. Reference ASTM A568 (current revision) for ASTM s Thickness Tolerance tables. THICKNESS & WIDTH EXTRAS Nominal Thickness (in.) Minimum Thickness (in.) 36.00" " 42.00" " 48.00" " $2.00 $1.50 $ $3.00 $ $4.00 $2.50 $ $6.00 $4.50 $ $7.00 $5.50 $ $8.00 $6.50 $ $8.75 $7.25 $ $9.50 $8.00 $6.50 Not all width/thickness/grade combinations are available. about specific items to ensure capability. Due to grade availability and/or scheduling constraints, standard lead times on some items may require a minimum order quantity of one or more heats. STANDARD GRADES Specifications Commercial Steel (CS) Drawing Steel (DS) $0.50 Deep Drawing Steel (DDS) $1.25 Extra Deep Drawing Steel (EDDS) $2.75 1/4 Hard (60-75 Rb) $0.75 1/2 Hard (70-85 Rb) 0.025" min $1.50 1/2 Hard (70-85 Rb) < 0.025" min Full Hard SAE J403 C C1010 Modifi ed C C1017 C C1020 $0.25 STRUCTURAL STEEL ASTM A1008 SS Grade 25 $0.50 SS Grade 30 $0.50 SS Grade 33 $0.50 SS Grade 40 $0.50 SS Grade 50 $0.50 SS Grade 80 $0.50 1

5 COLD ROLLED HIGH STRENGTH LOW ALLOY for Class 1, YLF, or YF grades. ASTM A1008 SAE J1392 SAE J2340 HSLA Grade 45 $ XLF $ XF $3.00 HSLA Grade 50 $ XLF $ XF $3.50 HSLA Grade 55 $ XF $4.00 HSLA Grade 60 $ XF $4.50 HSLA Grade 70 $ XF $5.25 HSLA Grade 80 $ XF $8.00 SPECIALTY about custom grades or modifications to standard grade chemistries. C1030 $0.75 C1035 $1.50 Rephos/Renitrogenized $1.25 Bake Hardenable JIS and Euronorm PROCESSING EXTRAS Commercial Brite (20 Max Ra) $1.50 TESTING/CERTIFICATION HSLA and structural steel grade extras include mechanical properties testing and certification; each coil, OD of coils only. All other certifications must be requested if not automatic with ordered spec. Specifi ed Hardness Mechanical Properties $0.25 Additional Testing 2

6 COLD ROLLED GENERAL Restricted Width & Thickness Tolerance Restricted Chemistry Restricted Mechanical Properties Standard Packaging Export Packaging Mill Edge - Availability $0.50 deduct COIL SIZE AVAILABILITY Based on ordered maximum coil weights. ID = 24" > 24,000 lbs 15,000-23,999 lbs $0.50 < 15,000 lbs 3

7 GALVANIZED AND GALVANNEALED All coils are sold on actual weight basis EXW producing location and extras listed are per hundredweight. Nucor s standard terms and conditions of sale are applicable. All prices are subject to change without notice. Pricing based on ASTM standards; deviations are subject to price extras. Reference ASTM A924 (current revision) for ASTM s Thickness Tolerance tables. THICKNESS & WIDTH EXTRAS Nominal Thickness (in.) Minimum Thickness (in.) 36.00" " 42.00" " 48.00" " $3.00 $ $4.00 $2.50 $ $6.00 $4.50 $ $7.00 $5.50 $4.00 Not all substrate/width/thickness/grade combinations are available. about specific items to ensure capability. Due to grade availability and/or scheduling constraints, standard lead times on some items may require a minimum order quantity of one or more heats. STANDARD GRADES ASTM A653 Commercial Steel (CS) Forming Steel (FS) $0.50 Deep Drawing Steel (DDS) $1.50 Extra Deep Drawing Steel (EDDS) $ ksi min yield SAE J403 C C1010 Modifi ed C C1017 C C1020 $0.50 STRUCTURAL STEEL ASTM A653 ASTM A1003 SS Grade 33 $0.25 ST33H $0.25 SS Grade 37 $0.25 ST37H $0.25 SS Grade 40 $0.25 ST40H $0.25 SS Grade 50 $0.50 ST50H $0.50 SS Grade 55 $0.75 ST55H $0.75 SS Grade 60 and 70 ST57H $0.75 SS Grade 80 $0.25 NS33 $0.25 NS40 $0.25 NS50 $0.50 NS57 $0.75 NS70 $1.25 1

8 GALVANIZED AND GALVANNEALED HIGH STRENGTH LOW ALLOY for Class 1, YLF, or YF grades. ASTM A653 SAE J1392 SAE J12340 HSLA Grade 40 $ XLF $ XF $2.00 HSLA Grade 45 $ XLF $ XF $2.50 HSLA Grade 50 $ XLF $ XF $3.00 HSLA Grade 55 $ XF $3.50 HSLA Grade 60 $ XLF $ XF $4.00 SPECIALTY Please inquire about custom grades or modifications to standard grade chemistries. Bake Hardenable JIS and Euronorm Dual Phase SURFACE FINISH & TREATMENT All coated material is tension leveled in-line. Extra Smooth is recommended for all painted applications. Minimum Spangle Extra Smooth (temper rolled) $0.50 Galvanneal $0.50 Oiled Prelube (Type Not Specifi ed) $0.50 Chem Treat (non-rohs Compliant) Chem Treat (RoHS Compliant) $0.50 Acrylic Coating (0.080 max gauge) $1.50 Phosphate 2

9 GALVANIZED AND GALVANNEALED TESTING/CERTIFICATION HSLA and structural steel grade extras include mechanical properties testing and certification for each coil. All other certifications must be requested if not automatic with ordered spec. Specifi ed Hardness $0.50 Mechanical Properties $0.25 UL Certifi ed $0.40 Additional Testing GENERAL Restricted Width or Thickness Tolerance Restricted Chemistry Restricted Mechanical Properties Standard Packaging Export Packaging COIL SIZE AVAILABILITY Based on ordered maximum coil weights. ID = 20" ID = 24" Min. PIW = 150 lbs > 24,000 lbs $ ,000-23,999 lbs $1.00 < 15,000 lbs > 24,000 lbs 15,000-23,999 lbs $0.50 < 15,000 lbs 3

10 D COATING WEIGHT EXTRAS FOR THE SHEET MILL GROUP Oz per Square Foot A30/G30 A40/G40 A60/G60 G90 G100 G115 G140 G165 G185 G200 G210 G235 Grams per Square Meter Nominal Thickness (in) Minimum Thickness (in) 40G/40G 50G/50G thru 70G/70G 90G/90G thru 100G/100G $1.00 $1.25 $1.75 $2.25 $2.50 $3.00 $3.50 $4.00 $ $1.25 $1.50 $2.00 $2.75 $3.00 $3.50 $4.25 $4.75 $5.50 $6.00 $6.25 $ $1.50 $2.00 $2.75 $4.00 $4.50 $5.00 $6.00 $7.00 $7.75 $8.50 $9.00 $ $2.00 $2.50 $3.75 $5.25 $6.00 $6.75 $8.25 $9.50 $10.50 $11.50 $12.00 $ $2.50 $3.00 $4.25 $6.25 $7.00 $8.00 $9.75 $11.25 $ $2.75 $3.50 $5.00 $7.50 $8.25 $9.50 $11.50 $13.25 $ $3.00 $4.00 $5.75 $8.25 $9.25 $10.50 $12.75 $14.75 $ $3.50 $4.50 $6.25 $9.25 $10.50 $12.00 $14.50 $16.75 $ $4.25 $5.25 $7.75 $11.25 $12.75 $14.50 $17.75 $20.50 $ $5.00 $6.25 $9.25 $13.50 $15.25 $17.50 $ $7.75 $11.25 $16.75 $18.75 Not all width/thickness/coating/grade/finish combinations are available. Please inquire about specific items to ensure capability at each division. Capabilities Min Max Berkeley G30 G185 Crawfordsville G30 G185 Hickman G30 G235 Decatur G30 G165