PRICE LIST Valid from June 1, 1 All s e works! All previous Easy-Cut-Price Lists will epire by this date.
INFORMATION How to order by telephone: 4 (0) 51 41/ 54-100 per E-mail: vertrieb@cedima.com by telefa: 4 (0) 51 41/ 54-111 Our office hours are Monday to Thursday 7:30 a.m.to 5:00 p.m. and Friday 7:30 a.m.to 3:00 p.m. Pictograms angle grinders petrol-driven saws table saws block saws joint cutters dry cutting wet cutting! It is principally possible to use dry cutting tools in wet cutting mode; this will increase the life of your CEDIMA diamond tool. But please always observe the safety instructions of your machine manufacturer. Color guidance system The color indicates the particular application area of the tool. hard and very hard, non-abrasive materials general building materials, for the universal operation abrasive materials tiles, glazed tiles Safety and operation instructions for diamond tools Check the diamond tool before every use for damage. Never use diamond tools that are deformed, damaged or cracked, that show abnormalities or that might be damaged by any act of violence. Do not use diamond tools that are unbalanced (strong machine vibrations). The rpm of the machine must not eceed the maimum permitted rpm of the diamond saw blade. Bore hole and diameter of the diamond saw blades and grinding tools must fit the machine. Always wear your personal safety equipment while working with diamond tools. Observe the machine manufacturer s safety instructions. Do not bend diamond saw blades and never cut curves. Diamond saw blades are not suitable for lateral grinding. In case of disregarding these instructions the user or other surrounding persons are likely to be seriously injured. Mount the diamond saw blades in the correct rotational direction indicated by the directional arrow. Never drop diamond tools hard on to the ground. Only guide the machine, do not push it into the material. The machine s weight is sufficient. Larger cutting depths should be cut in multiple passes. Diamond tools are self-sharpening. If they have become blunt due to unfavourable working conditions make some cuts in abrasive materials (e.g. lime sand-stone). This procedure is not valid for electroplated tools. 2
TABLE OF CONTENTS BETON BASIC for concrete slabs, general building materials, roof tiles and lime sand-stone BETON PLUS for reinforced concrete, washed-out concrete, concrete slabs, bricks, dimensional stone as well as general building materials BETON TURBO for reinforced concrete, concrete slabs, artificial- and natural stone, general building materials, soft to medium hard granite GRANIT NATURSTEIN BASIC for granite, concrete, washed-out concrete, clinker, bricks, roof tiles, artificial stone slabs, general building materials GRANIT NATURSTEIN PLUS for granite, hard natural stone, concrete, washed-out concrete and basalt BETON NATURSTEIN KOMBI for reinforced concrete, washed-out concrete, concrete slabs, artificial and natural stone, clinker, glazed tiles, ceramics and general materials, also for a clean cut of plasterboard and profile sheet plates ASPHALT BASIC for asphalt, lime sand-stone and other abrasive materials ASPHALT PLUS for asphalt, sand-stone, green concrete and other abrasive materials BETON ASPHALT KOMBI for the universal operation in soft concrete and other abrasive materials like asphalt, green concrete and floor pavement FLIESE BASIC for tiles, glazed tiles, stone ware and thin slabs of natural stone FLIESE TURBO for tiles, hard artificial and natural stone, ceramic, clincker and vitreous refractory material TS PORO PLUS table saw for lime sand-stone, highly compressed lime sand-stone, Poroton and other very abrasive materials TS BETON table saw for concrete, lime sand-stone, gross density < 2 and shaped paving stone TS GRANIT table saw for granite slabs and blocks and hard natural stone MR PLUS mortar reamer for removing mortar out of wall joints and working in other abrasive materials and concrete ST BASIC grinding disc for grinding and smoothing of concrete, clinker, artificial and natural stone and similar materials ST PLUS grinding disc for grinding and smoothing of concrete, clinker, artificial and natural stone and similar materials BNF PLUS slot cutters for cutting of cable shafts in concrete, floor finish, lime sand-stone, plaster, mortar, masonry, bricks, plaster board DS PLUS socket bits for masonry, lime sand-stone, Poroton and other abrasive materials BK BETON PLUS drill bits for the operation in concrete and reinforced concrete (to medium shares of reinforcement) CKB 162 core drilling unit for bore- up to 162 mm 4 4 4 5 5 5 6 6 6 7 7 10 10 11 Cedima reserves the right of further development and modifications of the products specified in this list without prior notice. We are not obliged to make corresponding modifications of products already supplied. Also Cedima reserves the right to delete without replacement products from her delivery programme. Without written approval by Cedima GmbH it is not allowed to reproduce any part of this list by reprint, photocopy microfilm or other methods or by storage in electronic systems. Amendments and modifications are not permitted. All the s and particulars are non-binding and without engagement. The complete terms of sale and delivery apply of Cedima Diamantwerkzeug- und Maschinenbaugesellschaft mbh in 22 Celle/ Germany. 3
DIAMOND SAW BLADES BETON BASIC! NEW W H L -mm2,2 10 37 2,4 10 35 2,5 10 32 2,6 10 34 3,0 10 34 3,2 10 37 3,2 10 37 3,4 10 41 3,4 10 41 3, 10 40 3, 10 40 12 14 1 22 22 2 2 -mm 11,00 12,00 13,00 15,00,00 5,00 5,00 6,00 6,00 3,00 5,00 Use for concrete slabs, general building materials, roof tiles and lime sand-stone. With turbo. BETON PLUS Long life time by 12 mm height! BETON TURBO With turbo. 4 -mm5000675 115 5000676 125 5000677 150 500067 10 500067 230 500060 300 500061 300 500062 350 500063 350 500064 400 500065 400 -mm50006 115 5000621 125 5000622 150 5000623 10 50006 230 5000625 300 5000626 300 50006 350 500062 350 500062 400 5000630 400 5000631 450 5000632 500 5000633 600 5000634 700 5000746 00 W H L -mm2,2 12 2 2,2 12 2 2,4 12 31 2,4 12 33 2,4 12 3 2, 12 40 2, 12 40 3,2 12 40 3,2 12 40 3,2 12 40 3,2 12 40 3,6 12 40 3,6 12 40 4,2 12 40 4, 12 40 4, 12 40 10 12 14 16 31 34 42 4 54 -mm 21,00,00 2,00 3,00 44,00 77,00 77,00,00,00 12,00 12,00 15,00 22,00 2,00 3,00 62,00 Use for reinforced concrete, washed-out concrete, concrete slabs, bricks, dimensional stone as well as general building materials as general building materials. -mm5000647 115 500064 125 500064 150 5000650 10 5000651 230 5000652 300 5000653 300 5000654 350 5000655 350 5000656 400 5000657 400 500065 450 500065 500 5000660 600 5000661 700 W H L -mm2,1 10 30 2,2 10 30 2,2 10 30 2,4 10 30 2,4 10 3 2, 10 3 2, 10 3 3,2 10 3 3,2 10 3 3,2 10 3 3,2 10 3 3,6 10 3 4,2 10 3 4,2 10 3 4,2 10 3 11 14 15 31 34 41 4 -mm 26,00 30,00 35,00 44,00 57,00 4,00 4,00 12,00 12,00 143,00 143,00 17,00 236,00 3,00 3,00 Use for reinforced concrete, concrete slabs, artificial- and natural stone, general building materials, soft to medium hard granite. Special shape, enables etremely fast cutting. All s e works Celle
DIAMOND SAW BLADES GRANIT NATURSTEIN BASIC GRANIT NATURSTEIN PLUS BETON NATURSTEIN KOMBI All s e works Celle -mm5000700 125 50007010 230 50007011 300 50007012 300 50007013 350 50007014 350 cutting rim W H -mm2,2 10 2, 10 3,2 10 3,2 10 3,2 10 3,2 10 -mm 2,00 65,00,00,00 12,00 12,00 Use for granite, concrete, washed-out concrete, clinker, bricks, roof tiles, artificial stone slabs, general building materials. With continuous cutting rim! -mm50007041 115 50007042 125 50007043 150 50007044 10 50007045 230 50007046 300 50007047 300 5000704 350 5000704 350 50007050 400 50007051 400 50007052 450 W H L -mm2,3 12 32 2,3 12 32 2,6 12 40 2,6 12 42 2,6 15 42 3,0 15 46 3,0 15 46 3,2 15 47 3,2 15 47 3,5 15 46 3,5 15 46 4,0 15 46 11 14 1 1 -mm 3,00 43,00 54,00 6,00,00 15,00 15,00 1,00 1,00 23,00 23,00 3,00 Use for granite, hard natural stone, concrete, washed-out concrete and basalt. With turbo. -mm5000662 115 5000663 125 5000664 150 5000665 10 5000667 0 500066 230 500066 230 5000670 250 5000671 300 5000672 300 5000673 350 5000674 350 cutting rim W H -mm1,2 10 1,2 10 1,4 10 1,6 10 1, 10 1, 10 1, 10 1, 10 2,0 10 2,0 10 2,2 10 2,2 10 -mm / / / 2,00 30,00 47,00 57,00 6,00 73,00 73,00 5,00 10,00 10,00 1,00 1,00 Use for reinforced concrete, washed-out concrete, concrete slabs, artificial and natural stone, clinker, glazed tiles, ceramics and general materials, also for a clean cut of plasterboard and profile sheet plates. With continuous cutting rim! 5
DIAMOND SAW BLADES ASPHALT BASIC -mm500064 125 500065 230 500066 300 500067 300 50006 350 50006 350 500060 400 500061 400 500062 450 500064 500 500066 600 5000752 700 5000752 00 W H L -mm2,1 10 34 2,4 10 3 2, 10 40 2, 10 40 3,2 10 40 3,2 10 40 3,2 10 40 3,2 10 40 3,6 10 40 4,2 10 40 4,2 10 40 4,2 10 40 4,2 10 40 14 1 1 21 21 26 30 36 42 4 -mm 35,00 65,00,00,00 133,00 133,00 173,00 173,00 22,00 24,00 36,00 615,00 60,00 Use for asphalt, lime sand-stone and other abrasive materials. With protective for a long life time! ASPHALT PLUS -mm500067 125 50006 230 50007000 300 50007001 300 50007002 350 50007003 350 5000745 350 50007004 400 50007005 400 50007006 450 50007007 500 5000700 600 50007501 700 50007502 00 W H L -mm2,2 10 31 2,5 10 40 3,2 10 40 3,2 10 40 3,2 10 40 3,2 10 40 4,4 10 40 3,2 10 40 3,2 10 40 3,6 10 40 4,2 10 40 4,2 10 40 4,2 10 40 4,2 10 40 10 15 21 21 30 33 40 46 52 -mm 50,00 0,00 12,00 12,00 14,00 14,00,00 1,00 1,00 23,00 315,00 425,00 56,00 7,00 Use for asphalt, sand-stone, green concrete and other abrasive materials. BETON ASPHALT KOMBI Long life time by 12 mm height! 6 -mm5000675 115 5000676 125 5000677 150 500067 10 500067 230 500060 300 500061 300 500062 350 500063 350 50007470 400 50007471 400 50007472 450 50007473 500 50007474 600 50007475 700 50007477 00 W H L -mm2,2 12 2 2,2 12 31 2,4 12 32 2,4 12 33 2,4 12 3 2, 12 40 2, 12 40 3,2 12 40 3,2 12 40 3,2 12 40 3,2 12 40 3,6 12 40 3,6 12 40 4,2 12 40 4, 12 40 4, 12 40 10 12 14 16 31 34 42 4 54 -mm 26,00 2,00 3,00 41,00 4,00,00,00 104,00 104,00 14,00 14,00 1,00 21,00 31,00 51,00 77,00 Use for the universal operation in soft concrete and other abrasive materials like asphalt, green concrete and floor pavement. All s e works Celle
DIAMOND SAW BLADES FLIESE BASIC -mm50007015 115 50007016 125 50007017 150 5000701 10 5000701 0 500070 230 50007021 250 cutting rim W H -mm1,5 7 1,5 7 1,6 7 1,6 7 1,6 7 1,7 7 1, 7 -mm- / / / 14,00 16,00 1,00 21,00 23,00 25,00 35,00 Use for tiles, glazed tiles, stone ware and thin slabs of natural stone. Continuous cutting rim for ecellent quality of cutting edges! FLIESE TURBO All s e works Celle -mm50007022 115 50007023 125 500070 150 50007025 150 50007026 10 500070 0 5000702 230 5000702 230 50007030 250 50007031 300 50007032 300 50007033 350 50007034 350 cutting rim W H -mm1,2 10 1,2 10 1,4 10 1,4 10 1,6 10 1, 10 1, 10 1, 10 1, 10 2,0 10 2,0 10 2,2 10 2,2 10 -mm / / / 2,00 30,00 47,00 47,00 57,00 6,00 73,00 73,00 5,00 10,00 10,00 1,00 1,00 Use for tiles, hard artificial and natural stone, ceramic, clincker and vitreous refractory material. 7
DIAMOND SAW BLADES TS PORO PLUS TABLE SAW -mm- W H L -mm- -mm- 5000635 650 3, 10 40 3 35/ 23,00 5000636 700 3, 10 40 42 60 255,00 5000637 00 4,5 10 40 54 60 3,00 500063 1000 4,5 10 40 60 60 56,00 Use for lime sand-stone, highly compressed lime sand-stone, Poroton and other very abrasive materials. TS BETON TABLE SAW -mm- W H L -mm- -mm- 50007122 650 4,4 10 40 36 35/ 2,00 50007123 00 4,4 10 40 52 60 1.34,00 500071 1000 4,4 10 40 54 60 1.41,00 Use for concrete, lime sand-stone, gross density < 2 and shaped paving stone. TS GRANIT TABLE SAW -mm- W H L -mm- -mm- 50007125 650 4,4 10 40 60 35/ 3,00 50007126 00 4,4 10 40 0 60 1.35,00 500071 1000 4,4 10 40 60 1.52,00 Use for granite slabs and blocks and hard natural stone. All s e works Celle
DIAMOND TOOLS FOR SPECIAL APPLICATIONS MR PLUS MORTAR REAMER -mm W H L -mm- -mm 5000712 115 6 7 32 44,00 5000712 115 7 32 52,00 50007130 115 10 7 32 5,00 50007131 125 6 7 32 10 4,00 50007132 125 7 32 10 5,00 50007133 125 10 7 32 10 6,00 Use for removing mortar out of wall joints and working in other abrasive materials and concrete. ST BASIC GRINDING DISC -mm W H L -mm- -mm 50007225 115 5,0 / 35 * 1 35,00 50007226 125 5,0 / 35 * 1 40,00 500072 10 5,0 / 35 * 55,00 *) inner / outer Use for grinding and smoothing of concrete, clinker, artificial and natural stone and similar materials. ST PLUS GRINDING DISC -mm W H L -mm- -mm 50007134 115 6,5 6 25 12 75,00 50007136 125 6,5 6 25 15 5,00 50007137 10 6,5 6 1 125,00 Use for grinding and smoothing of concrete, clinker, artificial and natural stone and similar materials. BNF PLUS SLOT CUTTERS All s e works Celle Versatile applications! -mm W H L -mm- -mm 5000622 115 2,0 10 32 12 30,00 5000621 125 2,0 10 32 1 35,00 5000620 10 2,4 10 32 2 46,00 Use for cutting of cable shafts in concrete, floor finish, lime sand-stone, plaster, mortar, masonry, bricks, plaster board. for indoor and outdoor areas (ceilings, floors, walls) for removing mortar and plaster out of wall and tile joints suitable for power cable, data cable, coaial cable etc. frequently required widths are easily performed by parallel cuttings
DIAMOND DRILL BITS DS PLUS SOCKET BITS -mm W H L -mm- connection 500065 6 3,5 4 M16 45,00 500066 2 3,5 6 M16 50,00 Drill bit for making openings for flush-mounted sockets or distribution boes. Use for masonry, lime sand-stone, Poroton and other abrasive materials. connection M-16 inside thread with turbo 3 2 1 Delivery incl. 1 heagon receptacle for standard drill chuck 2 centre drill 3 taper key BK BETON PLUS DRILL BITS -mm W H L -mm- connection 50006155 30 3,5 15 4 1 1/4 UNC 4,00 50007255 32 3,5 15 4 1 1/4 UNC 51,00 5000625 41 3,5 15 5 1 1/4 UNC 6,00 50006260 51 3,5 5 1 1/4 UNC 2,00 50006261 63 3,5 6 1 1/4 UNC 100,00 50006262 70 3,5 6 1 1/4 UNC 101,00 50006263 3 3,5 6 1 1/4 UNC 12,00 50006264 1 3,5 1 1/4 UNC 152,00 50006265 102 3,5 1 1/4 UNC 165,00 50006266 110 3,5 1 1/4 UNC 176,00 50006267 1 3,5 10 1 1/4 UNC 16,00 5000626 132 3,5 11 1 1/4 UNC 214,00 5000626 152 3,5 12 1 1/4 UNC 236,00 500060 15 3,5 12 1 1/4 UNC 21,00 500061 10 3,5 13 1 1/4 UNC 357,00 500062 0 3,5 15 1 1/4 UNC 37,00 500063 250 3,5 16 1 1/4 UNC 44,00 Universal drill bit for the operation in concrete and reinforced concrete (up to medium shares of reinforcement) usuable length 450 mm connection 1¼ UNC-bushing high feed and long life time conditionally applicable in dry cutting turbo 10 All s e works Celle
DIAMOND CORE DRILLING UNIT CKB 162 CORE DRILLING UNIT for bore- up to 162 mm 5000023 7,00 Available from August 1! Core drilling unit consisting of drill motor with ball valve and GARDENA plug nipple, with PRCD circuit breaker integrated in the cable and mounted on the drill column. Available accessories on request. Delivery without diamond drill bit! machine switch with overload cut-off-protection against motor overload cut-off carbon brushes - protection of the motor 1-speed oil bath gearbo - optimum lubrication mechanical safety coupling integrated water supply stainless steel combined spindle for mounting G½ and 1¼ drill bits drive and column fied unit easy to handle, sturdy and low-d space-saving, compact drilling unit - low weight Made in Germany Technical data and equipment features Ma. output power Idle speed Rated rpm Voltage/current/ frequency Protection class Ma. drill bit- tool mounting Column length Lift Weight 2,5 kw 675 pm 450 pm 230 V/11,5 A/50-60 Hz IP 162 mm G ½ inside and 1 ¼ UNC outside 70 mm 5 50 mm appro 15,5 kg All s e works Celle 11
Material Tools BETON BASIC BETON PLUS APPLICATION CHART FOR EASY CUT DIAMOND TOOLS BETON TURBO GRANIT NATURSTEIN BASIC GRANIT NATURSTEIN PLUS BETON NATURSTEIN KOMBI ASPHALT BASIC ASPHALT PLUS tiles, glazed tiles, slabs of natural stone vitreous refractory material hard clinkers, paving stones glazed stone ware tubes heavy ceramics natural stone (granite, gneiss etc.) artificial stone, polymer concrete reinforced concrete cured concrete washed-out concrete curb stones paving concrete concrete full brick high density lime sand-stone lime stone (marble, terrazzo etc.) roof tiles slate fibre-glas plastics plaster board clay bricks aerated concrete refractory material, porous lime sand-stone, gross density < 2 poroton masonry sand-stone floor finish mortar asphalt green concrete profile sheets very applicable well applicable conditionally applicable your partner BETON ASHPALT KOMBI FLIESE BASIC FLEISE TURBO TS PORO PLUS TS BETON TS GRANIT MR PLUS ST BASIC ST PLUS BNF PLUS DS PLUS BK BETON PLUS Cedima Diamantwerkzeug- und Maschinenbaugesellschaft mbh Lärchenweg 3 22 Celle /Germany Tel. 4 (0)5141/54-100 Fa4 (0)5141/54-111 E-Mail: info@cedima.com www.cedima.com