Custom & Fabricated Products

Custom & Fabricated Products Fluid Transfer Specialists

Custom Extrusions T ubing & Hose Custom Extruded to Specifications In addition to stock tubing and hose products, NewAge Industries also offers extensive custom extrusion capabilities. Custom extrusions of tight tolerances, custom reinforcement, colors, in-line cutting, and special resin compounds can be created for your application. Custom compounding permits designers to fine tune a plastic material to meet special performance requirements. By blending additives into the raw plastic material, we can enhance specific areas of plastic performance. Custom compounding adds value by providing a part specifically designed to meet your need a part that can last longer and work better in your application. We encourage you to contact your NewAge Industries sales representative between 8 am and 6 pm, eastern time, (Fridays until 5 pm) at 800--NEWAGE (fax 800-837-856), and utilize their knowledge and experience to turn your design ideas into reality. State-ofthe-art extrusion equipment, like this PVC line, ensures top-quality tubing and hose. Regular maintenance checks and frequent equipment updates enable NewAge Industries to continuously improve our products and enhance our processes. Resins and compounds can be combined or specially formulated to produce unique performance characteristics. NewAge Industries can provide custom compounds offering... Low Temperature Flexibility Improved Purity Resistance to Fungus Growth Improved Elasticity Resistance to Ozone Deterioration Anti-Static Properties Improved Dielectric Properties Improved Conductivity U.V. Stabilization Decrease of Tackiness Fuel and Oil Resistance Sterilizing Radiation In-line cutting accomplishes two processes the extrusion and your specific cut-tolength piece at one time. That saves you time and cost. It also ensures that you receive a straight piece with no coil set. 2

Custom Extrusions T ubing & Hose Custom Extruded to Specifications Custom extrusions can be made from a wide variety of materials. NewAge Industries will create custom tooling if necessary to give you a product that meets the specifications of your application. In addition to the materials in this catalog, the following are available as custom extrusions... Clear, Rigid Materials Synthetic Rubbers Acrylics Cellulosics Buna-N Hytrel Polycarbonate CAB, CAP Butyl Neoprene EVA (Varying percentages) EPDM Polyisoprene Nylon 6 Hypalon SBR All Densities of Polyethylene Tefzel Polystyrene Thermoplastic Elastomers PVDF Other Plastic Materials Services In-Line Cutting Co-Extrusions Multi-Lumen Tubing Multi-Tube Extrusions Webbed Tubing Colors Striping Special Sizes and Tolerances Custom Packaging and Labeling Ask about special O.D. treatments, such as ribbing for better hand gripping, longitudinal tracer lines, and specific color combinations. I.D. treatments are also available call for details. NewAge Industries can color match an extrusion to meet your need. Why not have us color your tubing, hose, or other custom extrusion to match your equipment or company colors for the ultimate in aesthetics and identification? NewAge Industries extrusion equipment features advanced computer technology that constantly monitors nearly critical points along an extrusion line. This system enables the same top quality on runs requiring custom specs, such as exceptionally tight tolerances, reinforcing yarn coverage, and special colors. Contact NewAge Industries to obtain a quotation for custom extrusions. 3

Heat-Formed Shapes Custom-Fabricated Heat-Formed Tubing & Hose Fabricating tubing and hose into special shapes opens a range of options for custom-designed parts at a reasonable cost. Formed shapes can eliminate problems such as kinking, and they often make installations easier. By using heat and special tooling in a controlled environment, we can custom form thermoplastic tubing and hose into a variety of configurations. Supply NewAge Industries with your blue print to see how we can manufacture shapes to match your application requirements. What shape do you need? Nearly unlimited shapes and designs are possible by heat forming thermoplastic tubing and hose, so why not get exactly what you need? NewAge Industries possesses the capabilities and experience to quickly produce and deliver your part by using stock products as a base for the custom item. Possible shapes include... Flared Ends Twists Elbows Curves Double and Triple Bends Retractable coils Flared ends allow for the proper fit around existing equipment or special fittings. As you can see, the possibilities are numerous. Even short, simple pieces with a single elbow can improve your product. There s no loose tubing to get in the way. Use elbows with twists, flared ends, even curves in bonded tubing and hose to exactly fit your application. 4

Custom Coiling Nylon & Polyurethane The flexibility to pull, twist, stretch, or bend a section of tubing is often a must in many manufacturing processes. Coiled tubing can be the solution. By taking flexible, semirigid, or rigid material and wrapping it into a coil, extraordinary flexibility can be achieved. Coiled tubing and hose is used in industries such as food and beverage, robotics, laboratories, and as supply lines for air and various fluids. Both coiled nylon and polyurethane offer resistance to chemicals, oils, and greases. Nylon also works well for solvents and alkalies, and it offers a very low degree of moisture absorption. Polyurethane handles fuels and the effects of weather and provides extra protection against kinking and abrasion.* Customization can include double coiled lines and a variety of sizes and colors in either nylon or polyurethane. Tubing I.D. sizes ranging from through can be coiled (check with your sales representative about larger sizes). Extended coil lengths vary. They can be as short as 6 feet or as long as 25 feet just tell us what you need. Standard coils of fluoropolymer tubing are offered by our Coiltef product. Fluoropolymer tubing may also be custom coiled to your required needs call for details. *Field testing should be performed to determine suitability for your application. Custom coils may be used for shop air supply, instrumentation, robotics, fluid transfer, paint spray, processing and packaging equipment, laboratories, food and beverage, pneumatic tools, vacuum powered equipment, and more. What material, length, I.D., O.D., color, and performance do you need? NewAge Industries can supply coils complete with removable or permanently attached fittings. Save yourself time and labor costs by having a finished part shipped to you. Clear or translucent custom coils allow fluids to be viewed. Take the guesswork out of making sure liquids are moving properly towards their destination. Contact NewAge Industries to obtain a quotation for custom coiling. 5

Overbraiding & Jacketing For Increased Capabilities, Protection, Kink Resistance There are times when applications require a more durable tubing or hose product than standard reinforced or unreinforced stock material. Applications may present high temperatures or pressures, excessive friction, attack by chemicals or corrosives, kink or crush possibilities, or other parameters that need a special hose. Perhaps you need to bundle multiple tubes of dissimilar material, or require electrical conductivity or grounding, or simply choose to alter the aesthetics of your product. Stainless steel or fabric overbraiding allows increased pressure capabilities for both reinforced hose and unreinforced tubing. Multiple layers are also possible. NewAge Industries is prepared to provide you with custom overbraiding and/or jacketing, uniquely suited to meet your application's requirements. We offer a broad mix of materials at a reasonable cost. Stainless steel overbraided PTFE hose, for instance, can handle up to 3000 psi working pressure* more than 20 times that of standard PTFE tubing. Straight walled, stainless steel overbraided PTFE hose conforms to SAE R4 standards. NewAge Industries stocks straight walled material in sizes ranging from 3/6" I.D. to -" I.D.; ask about custom sizes. In addition to stainless steel and fabric coverings, such as nylon and polyester, the following materials are available: Brass Kevlar Bronze Nomex Carbon steel Other fabrics Copper Most thermoplastic materials *A permanent fitting must be installed for use in high pressure applications. The listed pressure is meant only as a guide to aid in design. Field testing should be performed to determine the actual value for the application. Colored fabrics give you several advantages easy run traceability, increased pressure usage, and extra protection against heat, abrasion, and kinking. 6 Contact NewAge Industries to obtain a quotation for overbraiding or jacketing.

Fabrication Services Cutting, Printing, Striping, Packaging, Slitting, More What really sets NewAge Industries apart from other manufacturers is our ability and willingness to offer various services to create a custom part from stock material. This benefits you in two ways fast delivery and low cost. Repetitive cutting can provide you with ten pieces that are ten feet long or millions of pieces " long whatever you need. NewAge Industries can efficiently and cleanly cut the product to your specifications. Printing and striping can tailor the look of your company s product. We can provide permanentlyprinted material with your logo, part number, size information, date code, or other information that you specify. Printed products can reinforce and enhance your company identity, create product traceability, or identify capabilities or limitations of the item, all at a reasonable cost. Other Fabrication Services Hole Punching Slitting Irradiating Sleeving for high temperature or wear protection Bonding Heat-formed shapes (page 4) Coiling (page 5) Assembling (page 8) Packaging How many pieces do you need? How long? Repetitive cutting to tight tolerances is just one of NewAge Industries fabrication services. Show your attention to detail. Trademarks, sizes, special capabilities, and more can be printed for permanent identification. Custom packaging is another option. Your order can be cut to length, coiled, and boxed to your requirements. Contact NewAge Industries to obtain a quotation for fabrication services. 7

Hose Assemblies Custom Made to Specifications The final step in creating a functional hose is to assemble the components. This basic fact, however, is often overlooked in the purchasing process, causing delays and added expense. Why not allow the Fluid Transfer Specialists to save you from the hassles by assembling the components for you? NewAge Industries expert fabrication team is prepared to assemble any mix of components into a finished assembly. From an item as simple as Nylobrade hose with a Thermobarb fitting and a hose clamp, to a custom overbraided PTFE hose with a heat-shielding sleeve and a permanent, crimp-type fitting, we can assure you that the job is done correctly and cost effectively. We employ SPC (Statistical Process Control) procedures to ensure the best quality assembly and, if desired, we can perform % leak testing. Industrial stainless steel, carbon steel, sanitary polished stainless steel NewAge Industries has the materials and ability to permanently crimp the correct fitting for your application. Don t risk a mismatched system or misapplied fitting. Order your hose with fittings permanently attached to ensure a durable, leak-proof connection. By combining our broad line of tubing, hose, fittings, and clamps, the optimum hose assembly for your application can be fabricated quickly. Finished assemblies with permanentlyattached stainless steel fittings are available. Let NewAge Industries handle the assembly labor for you, so you receive a finished, ready-to-install product. Contact your sales representative for details. Contact NewAge Industries to obtain a quotation for hose assemblies. Coiltef, Nylobrade, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Hypalon TM DuPont Dow Elastomers Hytrel, Kevlar, Nomex, and Tefzel TMs Dupont WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2004 4/04 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Fluoropolymer Tubing PTFE, FEP, and PFA Formulations; AWG and Fractional Sizes; Coiled, Corrugated, or Convoluted; Overbraided Fluid Transfer Specialists

Fluoropolymer Tubing PTFE, FEP, & PFA Formulations Chemically inert; low permeability Manufactured from FDA-sanctioned ingredients for use with food contact surfaces Lowest coefficient of friction of any solid material Widest service temperature of any plastic tubing (-275 F to 0 F) Excellent electrical and weathering properties; non-flammable Made without plasticizer which can leach into critical streams Ultra-high-purity grades available for the semiconductor industry Notes Almost totally inert, FLUOROPOLYMER tubing can be used with virtually all industrial solvents, chemicals, and corrosive materials, even at elevated temperatures. It does, however, react with fluorine, molten sodium hydroxide, and molten alkali metals. FLUOROPOLYMER tubing can be steam or chemically sterilized in-line with any industrial cleaner, solvent, or sterilizing method. FLUOROPOLYMER s non-stick property allows transport of viscous, sticky materials without line clogging. It also offers outstanding aging resistance. PTFE s translucent white color will vary naturally from lot to lot, however the quality and physical properties do not change. FEP and PFA are clearer and can be heat sealed and heat bonded. Permanent color striping, etching, and longer-than-listed lengths are available through minimum order. Polyethylenejacketed, thin-wall fluoropolymer tubing, for low-cost purity, is also available through minimum order call for details. Recommended Fittings Pureloc injection molded tube fittings What is it? PTFE (Polytetrafluoroethylene) resin is supplied in powdered form, which is mixed, preformed, and extruded into a paste, and then finally tubing. It is translucent white in color. FEP (Fluorinated Ethylene Propylene) resin is pelletized for its hot-melt extrusion process and is a clear tubing. PFA (Perfluoroalkoxy) resin is also a pelletized product which is hot-melt extruded. It, too, is clear. Physical Properties** PTFE FEP PFA Hardness, Shore D -65 55 60 Tensile Strength, psi 3000-00 30 30 Elongation at Break, % 200-400 300 300 Brittle Temperature, F <-400 <-400 <-329 Max. Continuous Operating Temp., F 0 400 0 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. 2 Additional Services

Fluoropolymer Tubing PTFE, FEP, & PFA Formulations Note that sizes are listed first due to the variety of materials offered FLUOROPOLYMER TUBING Inch Sizes ID OD WALL /32 /32 3/32 3/6 3/6 5/6 5/6 7/6 7/6 9/6 9/6 7/8 - - - 2 3/32 3/6 5/32 3/6 5/6 5/6 7/6 7/6 9/6 9/6 3/6.830 7/8..580-2-.05.030.030.063.030.030.063.030.063.030.063.030.063.030.063.030.063.030.063.030.063.030.063.032.063.040.063.063.0.063.063.040.063.063 STANDARD LENGTH (FT.),,,,,,,, 25,, 25,, 25,, 25,, 25,, 25,, 25,, 25,, 25,, 25,, 25,, 25,, 25,, 25,, 25,, 5, 0 Straight 5, 0 Straight 5, 0 Straight 5, 0 Straight 5, 0 Straight 5, 0 Straight 5, 0 Straight 5, 0 Straight 5, 0 Straight PTFE 300 0074* 300 05 300 0228 300 0305 300 0382 300 0459 300 0536 300 0690 300 0767 300 0844 300 092 300 0998 300 075 300 52 300 229 300 306 300 383 300 460 300 537 300 64 300 69* 300 768 300 845 300 922 300 999* 300 2076 300 2307 300 246 WORKING PSI AT 70 F 389 295 393 238 99 300 242 20 200 75 86 75 37 67 25 60 2 55 6 90 47 32 BURST PSI AT 70 F 962 487 983 97 2 5 756 220 606 024 6 882 435 774 38 690 339 622 305 567 278 520 255 FEP 30 0048 30 0090 30 067 30 0244 30 032 30 0398 30 0552 30 0629 30 0706 30 0783 30 0860 30 0937* 30 04 30 09 30 68 30 322 30 399 30 707 30 784 30 86* 30 938 30 205 30 269 30 2246 30 2323 30 2477 30 2554* 30 263* 30 2708 PFA 320 076 320 0330 320 0407 320 0484 320 056 320 075 320 0792 320 0869 320 320 254 320 33 320 408 320 485* 320 76 320 2255 *Limited stock item; lead times and minimums apply call for details. Sold by standard coil length only. 0 ft. length available in FEP and PFA only. Add length suffix to part number when ordering. Example: ft. of x I.D. O.D. PTFE is part number 300 0228-. NOTE: Orders for ft. lengths of PTFE tubing may be filled with a maximum of two lengths of product totaling ft. Orders for ft. lengths of PTFE tubing may be filled with a maximum of three lengths of product totaling ft. All FEP and PFA lengths are supplied in single-section packages. BOLD indicates the critical dimension for fittings application. 305 447 235 6 WORKING PSI AT 70 F 389 295 393 238 99 300 242 20 200 75 86 75 67 25 6 90 80 47 69 57 37 BURST PSI AT 70 F 962 487 983 97 2 5 756 220 606 024 6 882 435 774 38 339 622 520 255 305 447 392 235 349 286 86 WORKING PSI AT 70 F 369 297 249 380 90 260 25 95 7 84 60 75 32 58 BURST PSI AT 70 F 859 497 253 899 945 758 280 633 968 862 424 778 38 6 294 FLUOROPOLYMER TUBING Metric Sizes ID (MM) 2 4 6 8 0 2 4 OD (MM) 4 6 8 0 2 4 6 WALL (MM) STANDARD LENGTH (FT.),,, 25,, 25,, 25,, 25,, PTFE 30 075 30 03 30 0525 30 0700 30 0875* 30 0* 30 225 FEP 3 077 3 0352 3 0527 3 0702 3 0877 3 052 PFA 32 0354 32 0529 32 0704 32 0879* *Limited stock item; lead times and minimums apply call for details. Sold by standard coil length only. Add length suffix to part number when ordering. Example: ft. of 2mm I.D. x 4mm O.D. PTFE is part number 30 075-. NOTE: Orders for ft. lengths of PTFE tubing may be filled with a maximum of two lengths of product totaling ft. Orders for ft. lengths of PTFE tubing may be filled with a maximum of three lengths of product totaling ft. All FEP and PFA lengths are supplied in single-section packages. BOLD indicates the critical dimension for fittings application. AWG and Fractional sizes are found on the next page. 3

AWG & Fractional PTFE Tubing PTFE Formulation Tubing in Three Wall Thicknesses High dielectric strength 0 Volts/mil Excellent volume resistivity 0 8 OHM-CM H2 Unaffected by thermal aging at 400 F Non-flammable and practically smokeless when incinerated Widest service temperature available (-275 F to 0 F) Meets Specifications: MIL-I-2229C, ASTM D-3295-8A, AMS 3653C, AMS 3654, AMS 3655 4 Notes Outstanding chemical and temperature resistance, coupled with fluoropolymer s low coefficient of friction, makes AWG & FRACTIONAL PTFE tubing an excellent choice on primary conductors as protection from chemical contact or temperature extremes. AWG & FRACTIONAL PTFE tubing resists melt-off by soldering irons when making electrical terminations, especially in close-quarter installations. The product s outstanding thermal properties offer continuous use from cryogenic temperatures up to 0 F. It is also non-aging, so brittleness is eliminated. PTFE is translucent white in color, however, the degree of whiteness will naturally vary from lot to lot. This color variance has no bearing on the material s quality or physical properties. Physical Properties** Hardness, Shore D -55 Specific Gravity 2.5 Tensile Strength, psi 3200 Elongation at Break, % 2-4 Brittle Temperature <-275 F Max. Operating Temp. 0 F **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. 330 00 330 023 330 0325 330 0437 330 0549 330 066 330 0773 330 0885 330 0997 330 09 330 22 330 333 330 445 330 557 330 669 330 78 330 893 330 2005 330 27 330 2229 330 234 330 2453 330 2565 330 2677 330 2789 330 290 330 303 330 325 33 067 33 0265 33 0363 33 046 33 0566 33 0664 33 0769 33 0860 33 0958 33 056 33 54 STANDARD WALL.007/.0.007/.0.007/.0.00/.04.00/.04.00/.04.00/.04.03/.09.03/.09.03/.09.03/.09.03/.09.03/.09.03/.09.03/.09.03/.09.03/.09.03/.09.06/.024.06/.024.06/.024.06/.024.06/.024.06/.024.06/.024.06/.024.06/.024.06/.024.06/.024.06/.024.06/.024.06/.024.09/.03.09/.03.09/.03.024/.036.027/.043.027/.043.027/.043 330 0094 330 0206 330 038 330 0430 330 0542 330 0654 330 0766 330 0878 330 0990 330 02 330 24 330 326 330 438 330 5 330 662 330 774 330 886 330 998 330 20 330 2222 330 2334 330 2446 330 2558 330 2670 330 2782 330 2894 330 3006 330 38 33 060 33 0258 33 0356 33 0454 33 0559 33 0657 33 0762 33 0853 33 095 Recommended Fittings THIN WALL.007/.0.007/.0.007/.0.007/.03.007/.03.007/.03.007/.03.009/.05.009/.05.009/.05.009/.05.009/.05.009/.05.009/.05.009/.05.009/.05.009/.05.009/.05.02/.08.02/.08.02/.08.02/.08.02/.08.02/.08.02/.08.02/.08.02/.08.02/.08.02/.08.02/.08.02/.08.02/.08.05/.025.05/.025.05/.025.020/.030.025/.035 Pureloc injection molded tube fittings 330 0087 330 03 330 0423 330 0535 330 0647 330 0759 330 087 330 0983 330 095 330 207 330 39 330 43 330 543 330 655 330 767 330 879 330 99 330 203 330 225 330 2327 330 2439 330 255 330 2663 330 2775 330 2887 330 2999 330 3 33 053 33 025 33 0349 33 0447 33 0552 33 06 33 0755 LIGHT WALL.004/.008.004/.008.004/.008.004/.008.004/.008.004/.008.004/.008.004/.008.004/.008.004/.008.004/.008.004/.008.006/.00.006/.00.006/.00.006/.00.006/.00.006/.00.006/.00.006/.00.007/.03.007/.03.007/.03.007/.03.007/.03.007/.03.009/.05.006/.00.007/.03.007/.03.009/.05.02/.08.05/.02.05/.02 AWG./ IN. SIZE 30 28 26 24 23 22 2 20 9 8 7 6 5 4 3 2 0 98 7 6 5 4 3 2 0 " 3/6" " 5/6" " 7/6" " " " 7/8" " Additional Services ID MIN/MAX.00/.05.03/.08.06/.02.020/.026.023/.029.026/.032.029/.035.032/.038.036/.042.040/.046.045/.052.05/.058.057/.065.064/.072.072/.08.08/.09.09/.0.02/.2.4/.24.29/.39.44/.55.62/.74.82/.95.204/.28.229/.244.258/.273.289/.305.325/.342.20/.30.88/.98.2/.260.33/.332.375/.394.438/.458.0/.520.625/.6.7/.775.875/.927.000/.060 STANDARD LENGTH (FT.), 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 Random Random Random Random Random Random Random Random 5 Straight 5 Straight 5 Straight Sold by standard length only. Add length suffix to part number when ordering. Example: ft. of AWG 30, thin wall tubing is part number 330 0094-. Note: 0 and 0 ft. lengths are furnished on spools and may have up to three splices.

Coiltef Coiled FEP Tubing Made of chemically inert clear FEP Manufactured from FDA-sanctioned ingredients Heat set into a retractable coil; excellent recoil memory Offers all the chemical and electrical insulation properties of standard FEP fluoropolymer tubing Allows flexibility to otherwise semi-rigid fluoropolymer tubing Made to order or stocked sizes available A C 360 0072 360 049 360 0226* 360 0303 360 0457 A ID 3/6 B OD 3/6 5/6 E D^ O.D. OF COIL - - 2-2- 4 E^ MAXIMUM AVAILABLE EXPANDED LENGTH; NOT INCLUDING TAILS C 2, 24, 48, 72 2, 24, 48, 72 2, 24, 48, 72 2, 24, 48, 72 2, 24 *Limited stock item; lead times and minimums may apply call for details. ^These dimensions are nominal. Add length suffix to part number when ordering. Example: 2 inches of I.D. x 3/6 O.D. tubing is part number 360 0072-2. The retracted length is approximately of the maximum expanded length excluding tails. Wall thickness for all standard sizes is. Tail length (item C) is 6 for all listed sizes. BOLD indicates the critical dimension for fittings application. B D Notes Almost totally inert, COILTEF can be used with all industrial solvents, chemicals, and corrosive materials even at elevated temperatures. It does, however, react with fluorine, molten sodium hydroxide, and molten alkali metals. Fluoropolymer s non-stick property allows transport of viscous, sticky material without line clogging. It also offers outstanding aging resistance. COILTEF is manufactured through a fabrication process which heat sets the coils. The coils should remain stable up to 200 F. At higher temperatures the coils will begin to relax and lose their set. If the application involves elevated temperatures, in-house testing is recommended. COILTEF may be steam or chemically sterilized in-line with any industrial cleaner, solvent, or sterilizing method. Care should be taken with steam sterilization to prevent coil relaxation. Testing is recommended. COILTEF can be manufactured from.085" to " tubing I.D. The coil diameter can be produced from " O.D. to 4" O.D. PFA-formulated COILTEF is available by special order. Physical Properties** Recommended Fittings Pureloc injection molded tube fittings Hardness, Shore D 55 Tensile Strength, psi 30 Elongation at Break, % 300 Brittle Temperature, F <-400 Max. Operating Temp., F 400 Additional Services **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Temperatures are for standard extruded (non-coiled) tubing. See Notes for additional information. 5

Corrtef Corrugated FEP Tubing Made from FEP fluoropolymer tubing Corrugations allow a nearly zero bend radius easily flexed Can be extended or compressed without affecting the tube s I.D. Made from FDA-sanctioned ingredients Made without plasticizers which can leach into critical streams Has all the chemical and electrical properties of straight-walled FEP tubing May be overbraided with Kevlar for higher pressures^ Notes C B Preferred direction of flow Vacuum Service: 29.9 in./hg. Bend Diameter: of tubing I.D. Extension/Compression Length Ratio: 2 to. A D Optimal flow is achieved and turbulence minimized by passing fluids through CORRTEF in the direction of the corrugation angles (as illustrated). CORRTEF is heat sealable, and the cuffs (straight ends) are made to accept standard barbed fittings. The end may be flared or expanded to permit shrink-tight connections. CORRTEF is manufactured in an industrial atmosphere and should be properly sterilized for clean-flow applications. For optimal cleaning of CORRTEF, the tube should be stretched to its maximum length and held vertically (direction of flow: down). Due to the annular corrugations, it may not be possible to remove all traces of particulate from CORRTEF, even under optimal cleaning conditions. ^Overbraiding with Kevlar will permit a minimum increase of six times the listed pressures. Kevlar overbraiding is available for sizes up to 7/8 I.D. call for details. Physical Properties** Hardness, Shore D -55 Tensile Strength, psi 30 Elongation at Break, % 325 Brittle Temperature, F <-275 Min. Continuous Svc. Brittle Temp., F - Maximum Operating Temperature, F 400 Max. Cont. Svc. Temp., zero pressure, F 200 340 0075 340 052 340 0229 340 0306 340 0383 340 0460 340 0537 340 064 340 069 340 0768 A MAX. ID 7/8 - - 2 B NOM. * - - 2 2 2 2 E C NOM..05.020.025.025.030.030.035.035.035.040 D REF. 9/6 5/6 - - - - -3/6 2- Recommended Fittings & Clamps Thermobarb barbed fittings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps WORKING PSI AT 70 F 62 42 37 30 25 20 7 5 2 BURST PSI AT 70 F 248 200 68 48 20 80 68 60 48 E dimension to be specified at time of order. Maximum overall available length: 2 ft. (including cuffs). *Workable I.D. length of the cuff (straight ends). All lengths will be supplied with B dimension cuffs. BOLD indicates the critical dimension for fittings application. **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Temperatures are for standard extruded (noncorrugated) tubing. Additional Services 6

Contef Convoluted PTFE Tubing Translucent PTFE tubing offers excellent chemical and electrical properties Available from stock with or without a stainless steel wire encircling the O.D. Wire coil provides increased pressure capability and aids in electrical grounding Easily flexed spiral construction allows far greater flexibility than straight wall tubing Spiral construction also allows for easier cleaning Made from FDA-sanctioned ingredients Available to AMS-T-894/^ (without wire only) C B A F D CONTEF Without Wire 3 0070 3 047 3 0224 3 030 3 0378 3 0455 3 0532 3 0609 3 0686 3 0763 3 0840* 3 097* 3 0994* A ID 5/6 - - 2 2-3 4 Additional Services B NOM. - - 2 2-2- 2-3 3 3 C NOM..05.020.020.020.025.025.030.035.040.043.062.062.062 D REF..320.44.4.590.660.780..600.90 2.4 3.90 3-4- E F NOM..85.277.307.43.492.67.862.70.40.960 2.470 2.940 3.940 BEND RADIUS 7/8 - - - 2-2- 3 4-5 7 9 MAX LENGTH (FT.) 25 25 25 75 75 40 40 40 30 30 20 WORKING PSI AT 70 F 62 56 52 40 35 30 27 24 20 7 6 5 2 Recommended Fittings & Clamps Thermobarb barbed fittings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps BURST PSI AT 70 F 248 220 200 60 40 20 80 65 55 5 40 *Limited stock availability; lead times and minimums may apply call for details. E dimension to be specified at time of order. All lengths will be supplied with B dimension cuffs. BOLD indicates the critical dimension for fittings application. CONTEF With Wire 352 0076 352 053 352 0230 352 0307 352 0384 352 046 352 0538 352 065 A ID 5/6 - B NOM. - - 2 2- C NOM..05.020.020.020.025.025.030.035 D REF..320.44.4.590.660.780..600 F NOM..85.277.307.43.492.67.862.70 BEND RADIUS 7/8 - - - 2.230 2- MAX LENGTH (FT.) 2 2 2 20 20 20 20 20 WORKING PSI AT 70 F 87 75 68 62 55 45 35 BURST PSI AT 70 F 400 348 300 272 248 220 80 40 E dimension to be specified at time of order. All lengths will be supplied with B dimension cuffs. BOLD indicates the critical dimension for fittings application. Notes CONTEF s helical construction aids in self cleaning when flushed with standard cleaning fluids. The cuffs (straight ends) are made to accept standard barbed fittings. Hose assemblies made to your specifications are available. PTFE s color will vary naturally from lot to lot, but the quality and physical properties do not change. FEP CONTEF for longer continuous lengths up to 0 ft. is available through custom order. CONTEF Without Wire: Vacuum Service: 27 in./hg at 72 F. Convolutions are molded into the tubing and will not cold flow into a straight wall under normal conditions. ^CONTEF with AMS (Aerospace Material Specifications) is available without wire only and is not stocked call for details. CONTEF With Wire: Vacuum Service: 27 in./hg at 72 F. For high vacuum applications, CONTEF can be produced with wire on the I.D. call for details. Physical Properties** WITHOUT WITH WIRE WIRE Hardness, Shore D 55-65 55-65 Tensile Strength, min. psi 2000 2000 Elongation at Break, % 300 200 Brittle Temperature, F <-275 <-0 Max. Operating Temperature, F 0 3 Max. Cont. Svc.Temp., zero pressure, F 4 3 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Temperatures are for standard extruded (non-convoluted) tubing. 7

Stainless Steel Overbraided PTFE Hose Smooth Core PTFE Tubing with Stainless Steel Overbraiding White PTFE inner core is made from non-toxic ingredients conforming to FDA standards Black core is electrically conductive to release or eliminate static charge Core material is inert; will not impart taste or odor or contaminate the stream Wide service temperature range (-65 F to 4 F) Excellent weathering properties; non-flammable Non-stick surface is easily cleaned by autoclaving, steam, or detergent Series 300 stainless steel overbraid provides for high pressures and protection of the core Meets or exceeds SAE R4 specifications for size and pressure Notes Smooth core STAINLESS STEEL OVERBRAIDED PTFE HOSE is constructed of extruded virgin PTFE material with a 300 stainless steel wire braid reinforcement jacket. The core is inert and offers long flexural life, low permeability, nonflammability, and the lowest coefficient of friction of any solid material. The overbraid permits higher pressure uses, reduces the possibility of kinking, and generally protects the core. Black conductive core hose works well in applications where static charge must be dissipated, such as those involving high resistivity fluids or gases at high velocity. Flush cleaning of the hose to eliminate manufacturing residue is recommended prior to use. Physical Properties** Temperature Range, F -65 to 4 Average Maximum Length, ft. 3/6 through : 300 and : and - : 75 WHITE CORE.030 inner core wall 900 003 900 038 900 073 900 0208 900 0278 900 0348 900 048 900 0558 DASH SIZE -3-4 -5-6 -8-0 -2-6 NOM. HOSE SIZE 3/6 5/6 AVG. ID.25.87.2.32.405.0.625.875 AVG. OD.2.32.375.445.549.648.778.030 WORKING PSI AT 70 F 3000 3000 3000 20 2000 0 200 0 BURST PSI AT 70 F 2000 2000 2000 00 8000 6000 4800 4000 BEND RADIUS 2 2 3 4 5.2 6.5 7.7 9 *Limited stock availability; lead times and minimums may apply call for details. BOLD indicates the critical dimension for fittings application. Consult factory for assembly information. BLACK CONDUCTIVE CORE.030 inner core wall 90 034 90 069 90 0204 90 0274 90 0344 90 044 90 0554 90 0694* DASH SIZE -4-5 -6-8 -0-2 -6-20 NOM. HOSE SIZE 5/6 - AVG. ID.87.2.32.405.0.625.875.25 AVG. OD.32.375.445.549.648.778.030.290 WORKING PSI AT 70 F 3000 3000 20 2000 0 200 0 7 BURST PSI AT 70 F 2000 2000 00 8000 6000 4800 4000 3000 BEND RADIUS 2 3 4 5.2 6.5 7.7 9 6 *Limited stock availability; lead times and minimums may apply call for details. BOLD indicates the critical dimension for fittings application. Consult factory for assembly information. LBS. PER FOOT.047.077.098.0.24.54.70.273 LBS. PER FOOT.077.098.0.24.54.70.273.3 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Additional Services Coiltef, Contef, Corrtef, Kwik Clamp, Pureloc, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2006 2/4/06 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Stainless Steel Overbraided PTFE Hose Smooth Core PTFE Tubing with Stainless Steel Overbraiding Fluid Transfer Specialists

Stainless Steel Overbraided PTFE Hose Smooth Core PTFE Tubing with Stainless Steel Overbraiding White PTFE inner core is made from non-toxic ingredients conforming to FDA standards Black core is electrically conductive to release or eliminate static charge Core material is inert; will not impart taste or odor or contaminate the stream Wide service temperature range (-65 F to 4 F) Excellent weathering properties; non-flammable Non-stick surface is easily cleaned by autoclaving, steam, or detergent Series 300 stainless steel overbraid provides for high pressures and protection of the core Meets or exceeds SAE R4 specifications for size and pressure Notes Smooth core STAINLESS STEEL OVERBRAIDED PTFE HOSE is constructed of extruded virgin PTFE material with a 300 stainless steel wire braid reinforcement jacket. The core is inert and offers long flexural life, low permeability, nonflammability, and the lowest coefficient of friction of any solid material. The overbraid permits higher pressure uses, reduces the possibility of kinking, and generally protects the core. Black conductive core hose works well in applications where static charge must be dissipated, such as those involving high resistivity fluids or gases at high velocity. Flush cleaning of the hose to eliminate manufacturing residue is recommended prior to use. Physical Properties** Temperature Range, F -65 to 4 Average Maximum Length, ft. 3/6 through : 300 and : and - : 75 WHITE CORE.030 inner core wall 900 003 900 038 900 073 900 0208 900 0278 900 0348 900 048 900 0558 900 0698* DASH SIZE -3-4 -5-6 -8-0 -2-6 -20 NOM. HOSE SIZE 3/6 5/6 - AVG. ID.25.87.2.32.405.0.625.875.25 AVG. OD.2.32.375.445.549.648.778.030.290 WORKING PSI AT 70 F 3000 3000 3000 20 2000 0 200 0 7 BURST PSI AT 70 F 2000 2000 2000 00 8000 6000 4800 4000 3000 BEND RADIUS 2 2 3 4 5.2 6.5 7.7 9 6 *Limited stock availability; lead times and minimums may apply call for details. BOLD indicates the critical dimension for fittings application. Consult factory for assembly information. BLACK CONDUCTIVE CORE.030 inner core wall 90 0099 90 034 90 069 90 0204 90 0274 90 0344 90 044 90 0554 90 0694* DASH SIZE -3-4 -5-6 -8-0 -2-6 -20 NOM. HOSE SIZE 3/6 5/6 - AVG. ID.25.87.2.32.405.0.625.875.25 AVG. OD.2.32.375.445.549.648.778.030.290 WORKING PSI AT 70 F 3000 3000 3000 20 2000 0 200 0 7 BURST PSI AT 70 F 2000 2000 2000 00 8000 6000 4800 4000 3000 BEND RADIUS 2 2 3 4 5.2 6.5 7.7 9 6 *Limited stock availability; lead times and minimums may apply call for details. BOLD indicates the critical dimension for fittings application. Consult factory for assembly information. LBS. PER FOOT.047.077.098.0.24.54.70.273.3 LBS. PER FOOT.047.077.098.0.24.54.70.273.3 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Additional Services NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2004 2/04 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Clamps & Accessories Fluid Transfer Specialists

Oetiker Clamps Ear Type Clamps Oetiker ear type clamps breathe and adapt to the expansion and contraction of hose affected by thermodynamics or aging no need to retighten Clamps are lightweight and compact important when bulky screw-type clamps interfere with limited-space applications Provides a tamper-proof seal without damage to the hose One Ear Installation Notes When installing OETIKER EAR TYPE CLAMPS, each ear must be crimped as recommended to obtain a proper seal. An incorrect installation may impair the connection. If a clamp ear can be closed all the way, the clamp size selected is probably too big, and the next smaller clamp should be used. to Apply: Position clamp on hose as shown. " to Remove: Grip outer edge of ear firmly and cut through with either pincers. STAINLESS STEEL Made of UNS S30400 (DIN.430) stainless steel or SAE 8/00 (DIN.0338) zinc plated carbon steel Features a mechanical lock at the joint instead of a spot weld prevents failure due to corrosion ZINC PLATED 582 0073 584 0072 584 0086 582 0094 584 0093 582 00 584 0 582 05 584 04 582 022 584 02 582 036 584 035 582 0 584 049 582 057 584 056 582 064 584 063 582 078 584 077 582 092 584 09 582 0206 584 0205 582 0220 584 029 582 0234* 584 0233* 582 0248* 584 0247* 582 0262* 584 026* 582 0276* 584 0275* 582 0290* 584 0289* 582 0304* 584 0303* 582 038* 584 037* 582 0325* 582 0332* 584 033* 582 0346* 584 0345* Larger sizes are available call for details. NOM. OD 7/6 5/32 35/64 9/6 23/32 3/6 7/8 5/6 - - -3/6 - -5/6 - -7/6-5/32 - -9/6 INCHES OPEN-CLOSED.44 -.3.444 -.38.486 -.394.524 -.453.55 -.472.57 -.496.68 -.543.669 -.594.728 -.68.779 -.669.827 -.76.890 -.779.949 -.839.008 -.898.067 -.945.26 -.004.85 -.063.244 -.22.303 -.8.362 -.240.42 -.299.480 -.358.0 -.378.559 -.437 Notes Give each ear a firm squeeze with your Oetiker Standard Jaw Pincers. Cut ear by taking several small bites at its base with either pincers. Then grip ear firmly and twist off. One Ear Special clamps are available through special order. These clamps feature a one-piece design made from spirally welded tubing to provide a strong grip with a smooth inner and outer band surfaces. The one-ear design allows for easy access. Call for details. Because each application has its own set of variables, application pressures vary. Field testing should be performed to determine the actual maximum pressure for the application. 2 Where access to ear is difficult, use Oetiker Side Jaw or Narrow Jaw Pincers. Stepless clamps may be easily removed by prying end up with a common screwdriver. *Limited stock availability; lead times and minimums may apply call for details. All Oetiker clamps sold in increments of pieces.

Oetiker Clamps Ear Type Clamps One Ear Stepless 582 535 582 5365 582 5379 582 5393 582 5400 582 5407 582 5435 582 5449 582 5463 582 5470 582 5477 582 55 582 5533 582 5547 582 556 582 567 582 5645 582 5673 582 5687 582 570 582 5743* 582 577* 582 5778* UNS S30400 (DIN.430) stainless steel Patented design guarantees 360 seal preventing leaks on soft or thin walled hose or tubing One-ear design allows easy accessibility NOM. OD 9/32 5/6 /32 25/64 3/32 5/32 7/32 35/64 9/6 23/32 7/8 5/6 - - -5/6-7/6-5/32 INCHES OPEN-CLOSED.275 -.228.35 -.268.343 -.275.374 -.307.394 -.327.43 -.346.484 -.385.524 -.425.543 -.449.55 -.453.57 -.472.68 -.520.669 -.57.728 -.602.779 -.654.890 -.764.949 -.823.008 -.882.067 -.945.26 -.004.303 -.8.42 -.299.480 -.358 STAINLESS STEEL 582 2670* 582 2684 582 272 582 2740 582 2768 582 2824 582 2852 582 2866 582 2880 582 2936 582 2964 582 2992 582 3020 582 3048 582 3062 582 3076 582 38 582 346 582 360 Two Ear UNS S30400 (DIN.430) stainless steel or SAE 8/00 (DIN.0338) zinc plated carbon steel One-piece design made from spirally welded tubing ZINC PLATED 584 2669* 584 2676* 584 2683 584 27 584 2739 584 2767 584 2823 584 285 584 2865 584 2879 584 2935 584 2963 584 299 584 309 584 3047 584 306 584 3075 584 37 584 345 584 359 NOM. OD 5/32 /64 3/6 5/6 9/6 9/32 3/6 7/8 5/6 - - -5/6-7/6 - INCHES OPEN-CLOSED.6 -.22.77 -.38.97 -.8.276 -.97.354 -.276.433 -.35.52 -.433.59 -.52.669 -.544.708 -.59.787 -.669.866 -.748.905 -.787.984 -.866.063 -.905.02 -.984.220 -.063.339 -.220.457 -.339.575 -.457 *Limited stock availability; lead times and minimums may apply call for details. All Oetiker clamps sold in increments of pieces. PINCERS Use for proper crimping of clamps Durable steel construction Three styles to select from Standard Jaw Pincer 980 082 jaw width Narrow Jaw Pincer 980 0 jaw width for tight areas Side Jaw Pincer 980 0203 Dual-purpose design allows clamps to be applied or removed in confined areas with pincers held parallel to the hose. May also be used like Standard Jaw Pincers; jaw width. 3

Kwik Clamp Nylon Double Bond Hose Clamps Made of U.L.-listed, durable, black nylon 6-6; will not rust or corrode Easy to install and remove with hose in place; reusable Handles temperatures from -40 F to 302 F** Handles most moderate non-hydraulic pressure applications Patented double row of teeth ensures a strong bond that will not vibrate loose Notes KWIK CLAMPS are typically stored and shipped with a small amount of water. This helps to maintain physical properties and prevents the clamps from drying and/or cracking prior to use. Water does not harm the product. **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Clamps must be used in higher pressure applications; testing recommended. 570 0072 570 049 570 0226 570 0303 570 0380 570 0457 570 0534 570 06 570 0688 570 0765 570 0842 570 099 570 0996 570 073 570 570 227 570 304 570 38* 570 458 570 535 570 62* 570 689 570 766* 570 843* 570 997* 570 2074* 570 25* 570 2228* 570 2305* 570 2382* 570 2459* NOM. OD 5/6 3/32 7/6 9/6 7/8 5/6 - - - - -9/6 - - -7/8 2 2-2- 2-2-7/8 3 3-3- 4 4- MIN..220.256.39.358.43.480.524.594.673.732.803.886.976.055..283.382.496.60.744.843.965 2.09 2.6 2.59 2.756 2.94 3.42 3.3 3.787 4.46 MAX..276.323.382.433.0.583.646.77.795.870.949.03.30.220.39.437.55.665.772.93 2.028 2.46 2.283 2.398 2.83 3.008 3.20 3.366 3.567 4.083 4.43 BAND WIDTH.7.9.8.8.24.24.30.28.29.30.29.28.28.30.35.36.35.36.36.36.36.34.36.34.37.37.37.36.35.37.35 BAND THICKNESS.05.06.06.06.06.06.08.07.08.08.08.08.08.08.08.08.08.08.09.08.09.08.08.08.0.0.0..0.0.0 4 *Limited stock availability; lead times and minimums may apply call for details. All Kwik Clamps sold in increments of pieces.

Worm Gear Clamps Stainless Steel Clamps All-steel construction for durability Miniature, marine grade, and lined types available Simple screw tightening method Wide range of uses Note that sizes are listed first due to the variety of materials offered MINIATURE CLAMPS DIAMETER RANGE NOM. MIN. MAX. SERIES 300 SERIES 3 9/6-7/32 5/6 7/6 9/6 7/8 7/8 - - - - 580 257 580 292 580 327 580 362 * 580 397 580 432 580 467 * 580 992 580 2027 580 2062 580 2097 580 232 580 267 580 2202 STANDARD CLAMPS DIAMETER RANGE SERIES 6 SERIES 620 SERIES 225 NOM. MIN. MAX. 3/6 7/8 - - - - 2 2-2- 2-3 3-3- 3-4 4-5 5-6 9/6 9/6 - -5/6-9/6-3/6 2-2-5/6 2-9/6 2-3/6 3-2-9/6 3 3-4 4-5 - - - - 2 2-2- 2-3 3-3- 3-4 4-5 5-6 6-7 LINED CLAMPS DIAMETER RANGE NOM. MIN. MAX. 3/6 5/6 - - -9/6-2 2-2- 3/6 - -3/6-5/6-9/6-3/6 2-3/6 5/6 - - - -5/6 2-2- 2-3 580 2762 580 2797 580 2832 580 2867 580 2902 580 2937 580 2972 580 3007 * 580 3042 580 3077 580 32 580 347 580 382 580 327 * 580 3252 * 580 3287 * 580 3322 * 580 3357 * 580 3392 * SERIES 63 580 3952 580 3987 580 4022 580 4057 580 4092 * 580 427 * 580 462 * 580 497 * 580 4232 * 580 4267 * 580 4827 580 4862 580 4897 580 4932 580 4967 580 02 580 37 580 72 580 7 580 542 580 577 580 522 580 5247 580 5282 580 537 580 5352 580 5387 580 5422 580 5457 580 0067 580 002 580 037 580 072 580 0207 580 0242 * 580 0277 580 032 * 580 0347 * 580 0382 * 580 047 580 0452 * 580 0487 * 580 0522 580 0557 580 0592 * 580 0627 * 580 0662 * 580 0697 * *Limited stock availability; lead times and minimums may apply call for details. All worm gear clamps sold in increments of 0 pieces. * * * * * * * Notes SERIES 300 Miniature Band: 5/6 wide, 30 stainless steel Housing: carbon steel, clear chromate dipped Screw: combination hex head slotted, 08 carbon steel, clear chromate plated SERIES 3 Miniature, Automotive Grade Band: 5/6" wide, 30 stainless steel Housing: 30 stainless steel Screw: combination " hex head slotted, 40 stainless steel SERIES 6 Band: " wide, 20 stainless steel to 4 nom; 30 stainless steel 4- nom & above Housing: 30 stainless steel Screw: combination 5/6" hex head slotted, 08 carbon steel, clear chromate plated SERIES 620 Band: " wide, 30 stainless steel Housing: 30 stainless steel Screw: combination 5/6" hex head slotted, 305 stainless steel SERIES 225 Marine Grade Band: 9/6" wide, 30 stainless steel Housing: 30 stainless steel Screw: combination 5/6" hex head slotted, 305 stainless steel SERIES 63 Lined Clamp for Soft Tubing Lining prevents soft tubing, such as silicone, from extruding through band notches during clamp application Band: " wide, 20 stainless steel Lining: 30 stainless steel Housing: 20 stainless steel Screw: combination 5/6" hex head slotted, 08 carbon steel, clear chromate plated 5

Easycut Plastic Tubing & Hose Cutter Cuts up to -" O.D. soft or semi-rigid material Handle made of strong, tough nylon black in color Replaceable blade made of hardened tool steel Able to cut faster and cleaner than many other cutters; no distortion or burring Lightweight, compact, durable; will not rust or corrode Safely and easily cuts flexible or semi-rigid PVC, rubber, silicone, TPRs, nylon, polyurethane, polyethylene, fluoropolymer, polypropylene, polybutylene, more Cutting Technique For semi-rigid materials: Place tubing or hose into the cradled handle and squeeze both handles as if using scissors. Squeeze slowly at the end of the cut. For soft materials: Place tubing or hose into the cradled handle and squeeze both handles. If necessary, rotate the tubing or hose as you squeeze. NOTE: EASYCUT will not cut metal-reinforced plastic hose or metal tubing. 980 0000 980 004 DESCRIPTION EASYCUT Cutter with one blade Replacement Blade 6

Minicut Miniature Plastic Tubing & Hose Cutter Cuts up to " O.D. soft or semi-rigid material Cuts quickly and cleanly without distortion or burring Made of durable, lightweight, black polypropylene with a steel blade Compact design just 3 long Safely and easily cuts flexible or semi-rigid PVC, rubber, silicone, TPRs, nylon, polyurethane, polyethylene, fluoropolymer, polypropylene, polybutylene, more 980 0049 DESCRIPTION MINICUT Cutter with one blade Cutting Technique Open the cutter by compressing its textured areas. Place tubing or hose into notch, then squeeze the open end of the cutter closed to cut tubing/hose. NOTE: MINICUT will not cut metal-reinforced plastic hose or metal tubing. PTFE Thread Sealant Use on Threads to Seal Against Leakage Made of virgin fluoropolymer Conforms to MIL-T-27730A Supplied on a plastic dispenser spool 980 0385-520 980 0427-520 TAPE WIDTH Sold by standard spool length only. THICKNESS.0035.0035 SPOOL LENGTH 520 520 7

Tubing Options PVC A Wide Range of Styles Chemical and corrosion resistance with rubber-like flexibility Choose from various construction options: braid reinforced, unreinforced, rigid pipe, wire reinforced, push-on style, spiral reinforced Applications include general industrial, food, pharmaceutical and medical, protective coverings, insulation sleeving, equipment components, many more Silicone Platinum or Peroxide Cured, Medical Grades Braid-Reinforced hose or unreinforced tubing Flexible, resilient, odorless Ingredients meet USP Class VI, FDA, and NSF-5 requirements Handles temperatures ranging from - F to 0 F Suction hose offers full vacuum rating Polyurethane Braid-Reinforced, Unreinforced, Colors Select from reinforced hose, unreinforced tubing, or a special formulation for pneumatic applications Naturally flexible no plasticizers to migrate out and cause flow contamination Resistant to weathering, U.V., moisture, chemicals, petroleum products Well-suited for applications involving repeated flexing, vibration, abrasion situations, radiation exposure, impact Ask for our latest catalog Inside you ll find details on all of NewAge Industries tubing and hose products, plus Chemical Resistance Charts, Temperature and Measurement Conversions, and a Glossary. The custom section highlights thermal tube bonding, heat-formed shapes, coiling, and other fabrication services. Plastic and metal fittings and clamps are also included. Contact your NewAge Industries sales representative or local distributor to request a free copy. Kwik Clamp, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2007 3/9/07 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Vardex Clear Steel Wire Reinforced PVC Suction Hose Fluid Transfer Specialists

Vardex Clear Steel Wire Reinforced PVC Suction Hose Spiral steel wire reinforcement incorporated within the wall of flexible PVC tubing Made from non-toxic ingredients conforming to FDA standards Kink and crush resistant Handles pressure and full vacuum (29.9 in./hg.) applications Glass-like clarity with mirror-smooth surfaces provide outstanding visual flow characteristics Lightweight (compared to rubber hoses) yet tough and abrasion resistant Notes VARDEX, with its steel wire reinforcement coil, is specially suited for applications where resistance to kinking is of primary importance. A proprietary construction technique employed during the manufacture of VARDEX permits full vacuum capabilities (29.9 in./hg.) for all sizes without hose collapse. Constructed of corrosion-resistant PVC, VARDEX can be used to transport various chemicals in areas with tight turns and sharp bends. Its bend radius is approximately four times the I.D. For easy identification, VARDEX is imprinted with the trademarked name. Physical Properties** Hardness, Shore A ±5 73 Tensile Strength, psi 2 Elongation at Break, % 270 Brittle Temperature, F 23 Maximum Operating Temperature, F 40 0070 40 02 40 054 40 096 40 0238 40 0280 40 0322 40 0364 40 0406 ID - - 2 OD 29/64.60.748 29/32.024.39.634.909 2.382 WALL.02.8.24 9/64.37.60.92.205.9 Recommended Fittings & Clamps Thermobarb barbed fittings Cam operated couplings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps WORKING PSI AT 70 F 200 75 40 85 85 85 70 BURST PSI AT 70 F 600 525 420 300 300 255 255 255 20 LBS. PER FT. 6.6.5 5.0 9.8 24.0 37.6 49.0 67.2 85.0 Standard coil length is ft. Add length suffix to part number when ordering. Example: ft. of 2 I.D. x 2.382 O.D. hose is part number 40 0406-. Cut coils are available; charges apply call for details. BOLD indicates the critical dimension for fittings application. **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Kwik Clamp, Thermobarb, Vardex, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2007 3/07 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Clearflo Clear PVC Tubing Fuel & Oil Grade PVC Tubing Fluid Transfer Specialists

Clearflo Clear PVC Tubing Made from non-toxic ingredients conforming to FDA and 3A standards* PVC compound meets USP class VI requirements* Listed by the National Sanitation Foundation (NSF 5)* Glass-like clarity* with mirror-smooth surface provides outstanding flow characteristics Does not impart a taste or odor* Lightweight yet tough and abrasion resistant As flexible as rubber Handles a wide variety of chemicals, gases, and liquids Special Fuel & Oil grade available *Clear only Notes CLEARFLO is generally unaffected by most oxidizing and reducing agents. Diluted acids and alkalies have little effect, though if highly concentrated they tend to make the tubing less pliable. If chemical resistance is of major concern, in-plant tests are suggested. In clean applications, CLEARFLO s smooth surface prevents lodging of bacteria and sediment buildup. It is easily drained and flushed clean with most available cleaning and sanitizing agents. Transparent yellow CLEARFLO FUEL & OIL was created to extend the working life of PVC tubing in fuel and oil applications. Gasoline and oils harden standard PVC over periods of intermittent use, but CLEARFLO FUEL & OIL is specially formulated to prevent hardening. Physical Properties** Fuel & Oil Clear Hardness, Shore A ±5 62 68 Tensile Strength, psi 980 900 Elongation at Break, % 730 400 Brittle Temperature, F -20-4 Maximum Operating Temp., F 75 75 CLEARFLO FUEL & OIL Transparent Yellow 0032 0067 002 037 ID 3/6 OD 5/6 WALL STANDARD LENGTH (FT.),, WORKING PSI AT 70 F 68 55 55 40 BURST PSI AT 70 F 204 65 65 20 LBS. PER FT. 2. 2.8 3.5 4.9 Specially formulated to remain flexible when used with fuels and oils. NOT NSF LISTED. For industrial applications only. Add length suffix to part number when ordering. Example: ft. of I.D. x O.D. tubing is part number 0032-. Sold by standard coil length only. BOLD indicates the critical dimension for fittings application. **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Additional Services

Clearflo Clear PVC Tubing CLEARFLO Clear 0 007 0 0225 0 0379 0 0456 0 084 0 098 0 0995 0 49 0 226 0 303 0 380 0 457 0 534 0 6 0 688 0 765 0 842 0 2 0 2227 0 2304 0 238 0 2689 0 2920 0 2997 0 3074 0 3536 0 363 0 3767 0 3844 0 392 0 452 0 4306 0 4383 0 469 0 4768 0 4845 0 4999 0 76 0 553 0 5307 0 5384 0 546 0 565 0 5769 0 5846 0 5923 0 6077 ID 3/32 3/6 3/6 3/6 5/6 5/6 5/6 7/6 9/6 7/8 - - - - - - - - 2 2 2-2- 3 4 OD 5/32 3/6 5/6 7/6 7/6 9/6 9/6 3/6 7/8 7/8 - - - - - - - - - - -7/8 2 2 2-2- 2-2- 3 3-4- WALL /32 /32 /32 /32 3/32 3/32 3/32 3/32 3/6 3/32 3/32 3/32 3/6 3/6 3/6 3/6 STANDARD LENGTH (FT.) 0 0 0, 0, 0,, 0, 0, 0, 0,,, WORKING PSI AT 70 F 33 42 44 68 33 55 70 55 60 70 60 70 40 65 66 30 40 45 40 20 35 40 9 35 44 44 30 28 45 22 3 45 9 26 40 6 29 4 35 24 22 9 2 BURST PSI AT 70 F LBS. PER FT..5.68.85 2.0.2 2.7 4.6 3.4 5.7 8.3 4.2 6.8 9.7 4.8 7.8. 8.7 2.5 6.2 9.9 3.9.0 7.6 2.0 6.6 9.0 9.4 3.2 44.3 22. 25.0 39.4 55.0 30.5 47.8 66.5 36.0 56. 77.5 4.5 80.0 47. 99.7.0 22.0 44.0 300.0 Add length suffix to part number when ordering. Example: ft. of I.D. x - O.D. tubing is part number 0 452-. Cut coils are available from coils of ft. or less; charges apply call for details. Coils over ft. are sold by standard coil length only. BOLD indicates the critical dimension for fittings application. 32 68 76 272 32 220 280 220 240 280 200 240 280 60 200 260 264 200 20 60 80 60 80 40 60 76 40 76 76 20 2 80 200 88 24 80 76 04 60 64 6 56 40 96 88 76 84 Recommended Fittings & Clamps Cam operated couplings Thermobarb barbed fittings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps

Recommended fittings for Clearflo Thermobarb Plastic Plastic Barbed Fittings in Five Materials Precision molded in nylon-6, high density polyethylene, PVDF, polypropylene, glass-fiber reinforced nylon, or glass-fiber reinforced polypropylene Lightweight, compact, easy to install and disconnect High impact strength Excellent chemical resistance Thermobarb Brass Brass Barbed Fittings Formed of forged and/or machined brass Tapered pipe threads are made to Dryseal USA specifications An industrial standard use in all general purpose applications May be used in potable water systems Cam-Operated Couplings Four Plastic Materials Select from Nylon (glass-fiber reinforced), Polypropylene (glass-fiber reinforced), FDA-grade PVDF, or FDA-grade Polypropylene Much lighter weight than metal counterparts Made to MIL-C-27487 dimensions fully interchanged with other materials made to the same standards regardless of material Ask for our latest catalog Inside you ll find details on all of NewAge Industries tubing and hose products, plus Chemical Resistance Charts, Temperature and Measurement Conversions, and a Glossary. The custom section highlights thermal tube bonding, heat-formed shapes, coiling, and other fabrication services. Plastic and metal fittings and clamps are also included. Contact your NewAge Industries sales representative or local distributor to request a free copy. Clearflo, Kwik Clamp, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2004 7/5/04 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Nylobrade Clear Braid Reinforced PVC Hose Fluid Transfer Specialists

Nylobrade Clear Braid Reinforced PVC Hose Open mesh polyester braiding permanently encapsulated in walls of clear, flexible PVC tubing Offers far higher pressure capabilities than unreinforced PVC tubing Made from non-toxic ingredients conforming to USP Class VI and FDA standards Crystal clear compound provides full visual flow* Mirror smooth interior permits outstanding flow characteristics Corrosion and abrasion resistant with flexibility similar to rubber but with much longer life Notes NYLOBRADE is made from non-toxic ingredients selected from those sanctioned by the Food and Drug Administration (FDA) for use in food contact applications. NYLOBRADE is generally unaffected by most oxidizing and reducing agents. Diluted acids and alkalies have little effect, though if highly concentrated tend to make the hose less pliable. If chemical resistance is in question, in-plant tests are suggested. Gasoline and oils will harden PVC over periods of intermittent use. In these applications, continuous use will slow the hardening process. *NYLOBRADE HP (High Pressure) sizes I.D. and up have a tighter braid pattern and therefore reduce the visual flow contact and increase the hose s resistance to bending and flexing. Heavier walls on similar I.D.s will be more resistant to kinking. Custom fabrication, such as a ribbed O.D. for greater flexibility and abrasion resistance, are also available. NSF-approved NYLOBRADE is available call for details. Physical Properties** Hardness, Shore A ±5 80 Tensile Strength, psi 20 Elongation at Break, % 320 Brittle Temperature, F - Maximum Operating Temperature, F 75 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. 0076 0230 03 0309 0307 02 006 046 03 0540 0538 02 0075 03 0694 0692 02 0096 0846 0923 02 07 54 02 0005 308 02 002 385 02 009 462 02 0026 ID 3/6 5/6 - - - - 2 2 OD.35.394.435 29/64 7/32.575.600.70.728.8 29/32.024 -.299 -.732.732.929.9 2-2- WALL.095.03.093.02 3/32..3.05.4.75 9/64.37 3/6. 3/6.24.24.25.225 WALL TYPE Std. Std. Thin Std. HP Std. Thin Std. HP Thin Std. HP Std. Std. HP Std. HP Std. HP Std. HP Std. HP STANDARD LENGTH (FT.), 0,, 0,, 0,, 0,, 0,, 0,, 0,, 200, 0,, 0,, 200, 300, 0,, 300, 0,, 200, 300,, 300,,,,,,, Additional Services WORKING PSI AT 70 F 465 35 36 300 400 280 25 230 265 9 25 258 200 233 30 85 0 70 90 33 BURST PSI AT 70 F 395 945 948 900 200 840 645 690 795 573 645 774 600 4 699 390 555 330 4 20 270 399 Std. = standard; HP = high pressure. Add length suffix to part number when ordering. Example: 0 ft. of " I.D. x.35" O.D. is part number 0076-0. BOLD indicates the critical dimension for fittings application. Recommended Fittings & Clamps Thermobarb barbed fittings Cam operated couplings Oetiker ear type clamps Kwik Clamp hose clamps Worm gear clamps LBS. PER FT. 3.53 5.06 5.35 6.03 6.03 7.77 8.02 9.26 9.26 0.73.82 20.00 8.7 20.53 20.53 29.03 29.03 60.70 60.70 62.2 62.2 95.02 95.02 Kwik Clamp, Nylobrade, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2004 2/04 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Nylobrade Push-On Hose Thermoplastic Push-On Style Hose Fluid Transfer Specialists

Nylobrade Push-On Thermoplastic Push-On Style Hose A blend of nitrile rubber and PVC reinforced with polyester Specially designed for use with push-on style fittings without the need of clamps Non-marking cover, resistant to U.V., ozone, and abrasion Electrically non-conductive Offers cold temperature flexibility Silicone free use as air hose in paint applications Lighter weight and more abrasion resistant than all-rubber, push-on style hose Available with brightly colored covers call for details Notes NYLOBRADE PUSH-ON may be used up to 200 psi at 70 F. Elevated temperatures require in-field testing to determine suitability for use without clamps. The opaque black color of NYLOBRADE PUSH-ON helps hide dirt and scuff marks. Other colors can be manufactured to match machinery and equipment call for details. Physical Properties** 43 0054 43 0068 43 0082 43 00 43 038 43 066 ID.33 OD 9/6 7/8.030 WALL WORKING PSI AT 70 F 200 200 200 200 200 200 BEND RADIUS 2. 3.3 3.75 5.00 6.25 7. LBS. PER FT. Standard coil length is ft. Add length suffix to part number when ordering. Example: ft. of I.D. x O.D. tubing is part number 43 0054-. Cut coils are available; charges apply call for details. BOLD indicates the critical dimension for fittings application. 8 0 4 7 20 Hardness, Shore A 75 Tensile Strength, psi 800 Ultimate Elongation, % 3 % Modulus of Elasticity, % 200 Brittle Temperature, F -35 Maximum Operating Temp. when used with clamps, F **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Recommended Fittings Thermobarb barbed fittings Cam operated couplings SafeAir fittings Additional Services Nylobrade, SafeAir, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2006 2/7/06 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Newflex Spiral Reinforced PVC Suction Hose Fluid Transfer Specialists

Newflex Spiral Reinforced PVC Suction Hose Notes NEWFLEX reinforced suction hose is widely used throughout industry for both positive and negative pressure applications. Its advanced design allows the use of light-weight, corrosionresistant PVC to replace bulkier and heavier plywrapped rubber hose. NEWFLEX series FH and FHS are clear, allowing the user to have full visual contact with the flow of material inside. The Food Grade lines are made from FDA-approved ingredients suitable for food and beverage handling. The smooth interior is easily sterilized and cleaned. Both types have a vacuum rating of 28 in./hg. NEWFLEX series VFH is produced from a clear FDA core with an industrial grade white helix, which is not exposed to the hose I.D. It can handle light-duty pressure discharge, gravity feed, and moderate vacuum applications. Physical Properties** SERIES SERIES FH & FHS VFH Hardness, Shore A ±5 65 70 Tensile Strength, psi 900 2000 Elongation at Break, % 440 420 Brittle Temperature, F -45-42 Max. Operating Temperature, F 40 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Recommended Fittings & Clamps Cam operated couplings Thermobarb barbed fittings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps DISTRIBUTOR NER % PVC construction Spiral reinforcement made from rigid PVC to resist impact, crushing, and kinking Lighter than ply-wrapped rubber and other similar hoses Available in Food or Industrial Grades Food Grade made from non-toxic ingredients conforming to FDA and 3A standards Smooth interior produces low friction loss permitting maximum flow NEWFLEX FH Standard Duty Clear, Convoluted O.D. FOOD GRADE 20 00 20 078 20 0255 20 0332 20 0409 20 0486 20 0563 20 0640 20 077 WORKING PSI AT 70 F 60 45 45 40 40 35 35 NEWFLEX VFH Light Duty Clear with White Helix, Convoluted O.D. Kwik Clamp, Newflex, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2004 7//04 ID - - - 2 2-2- 3 4 OD.295 - -3/6 2-3/32 2-2- 2-5/6 3-7/6 4-9/6 45 James Way Southampton, PA 8966 LBS. PER FT. 9 29 34 40 55 77 02 64 NEWFLEX FHS Heavy Duty Clear or Clear with White Helix, Smooth O.D. ID OD WORK. BURST VAC. BEND LBS. FOOD INDUSTRIAL PSI AT PSI AT RATE RADIUS PER GRADE GRADE 70 F 70 F (IN./Hg.) FT. 2 08 23 080 5/6 05 35 28 3 20 2 0258 23 0257-300 28 3 27 2 0335 23 0334 - - 95 285 28 3 30 2 042 23 04 - -3/6 85 255 28 4 40 2 0489 23 0488 2 2-80 240 28 5 60 2 0566 23 0565 2-2-7/8 75 225 28 7 85 2 0643 23 0642 3 3-7/6 65 95 28 8 5 2 0797 23 0796 4 4-28 0 75 Food Grade is all Clear; Industrial Grade has a White Helix. Standard coil length is ft. Add length suffix to part number when ordering. Example: ft. of I.D. x 5/6 O.D. Food Grade hose is part number 2 08-. Cut coils available; charges apply call for details. BOLD indicates the critical dimension for fittings application. 24 076 24 0253 24 0330 24 0407 24 0484 24 056 24 0638 ID - - OD.570.700.830.965 - - -3/6 BURST PSI AT 70 F 80 35 35 20 20 05 05 VAC. RATE (IN./Hg.) LBS. PER FT. 24 075 2 2-8 2 34 This series has no positive pressure ratings. Increasing pressure will cause the hose to elongate and expand. If pressure is a concern, in-plant testing is advised. Standard coil length is ft. Add length suffix to part number when ordering. Example: ft. of I.D. x.570 O.D. hose is part number 24 076-. Cut coils are available; charges apply call for details. BOLD indicates the critical dimension for fittings application. 24 24 24 24 24 22 20 VAC. BEND RATE RADIUS (IN./Hg.) 28 2 28 3 28 3 28 4 28 4 28 5 28 6 28 8 28 0 Standard coil length is ft. Add length suffix to part number when ordering. Example: ft. of - I.D. x - O.D. hose is part number 20 078-. Cut coils available; charges apply call for details. BOLD indicates the critical dimension for fittings application. BEND RADIUS 2 5 6 8 0 4 5 20 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Clear-40 Clear Rigid Schedule 40 PVC Pipe & Fittings Fluid Transfer Specialists

Clear-40 Clear Rigid Schedule 40 PVC Pipe & Fittings Made from a clear, virgin, rigid compound to permit visual contact with the flow Non-toxic ingredients conform to FDA standards for use with food contact surfaces Listed by the National Sanitation Foundation (NSF 6) for use with potable water Smooth pipe interior surface provides excellent flow characteristics Flame retardant; non-conductive Manufactured to schedule 40 dimensions; compatible with standard PVC pipe, fittings, and valves Quick and easy glue-on installation with primer and cement Notes The non-toxic compound used to manufacture CLEAR-40 is non-conductive and has a U.L. rating of 94 VO. Because CLEAR-40 is highly corrosion resistant as well as transparent, it is used extensively in chemical, pharmaceutical, food plants, and in laboratories and hospitals where visual contact with the flow is desired. CLEAR-40 pipe can be used interchangeably with standard schedule 40 gray or white fittings. Assemblies with standard fittings or with CLEAR-40 fittings should be permanently glued using primer and solvent cement. Twenty-foot pipe lengths, bell-shaped pipe ends, other fitting configurations, and schedule 80 pipe are available through minimum order call for details. CLEAR-40 pipe is neither recommended to be threaded nor recommended for use in applications involving compressed air or gas. Although CLEAR-40 is completely transparent, it does have a slight blue tint. Physical Properties** Hardness, Rockwell R 09 Tensile Strength, psi at 73 F 7300 Flexural Strength, psi at 75 F 3,400 Izod Impact, ft. lbs./in. notch at 73 F.95 Maximum Service Temperature, F 40 Flammability U.L. 94 VO (flame retardant) **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. CLEAR-40 PIPE 0030 0065 0 035 070 0205 0240 0275 030 0345 045 NOM. PIPE SIZE - - 2 2-3 4 AVG. ID.354.483.608.80.033.364.592 2.049 2.445 3.042 3.998 Additional Services MIN. WALL.088.09.09.3.33.40.45.54.203.26.237 OD.540.675.840.0.35.660.900 2.375 2.875 3.0 4.0 STD. LENGTH (FT.)* 0 0 0 0 0 0 0 0 0 0 0 MAX. WORKING PSI @ 73 F 390 30 300 240 220 80 70 40 30 0 LBS. PER 0 FT. PC..8.09.6 2.4 3.5 4.26 5.09 6.82 0.76 4.09 20.06 Add length suffix to part number when ordering. Example: 0 ft. of nom. pipe size is part number 0030-0. *0 foot pipe must ship by truck, or it may be cut for other shipping methods (charges apply call for details). Standard 8 foot lengths can ship by UPS. Ratings shown are for water non-shock at 73 F with solvent cemented joints. BOLD indicates the critical dimension for fittings application. Recommended Fittings Clear-40 fittings

Clear-40 Clear Rigid Schedule 40 PVC Pipe & Fittings CLEAR-40 FITTINGS 90 Elbow 590 2225 590 2239 590 2274 590 2309 590 2344 590 2379 590 244 590 2428 590 2442 590 2470 NOM. SIZE - - 2 2-3 4 MAX. WORKING PSI @ 73 F 390 300 240 220 80 70 40 30 0 LBS./ EACH.03.04.07.2.22.25.36.77.0.70 45 Elbow 590 90 590 924 590 959 590 994 590 20 590 2064 590 2078 590 2092 590 220 NOM. SIZE - 2 2-3 4 MAX. WORKING PSI @ 73 F 390 300 240 220 70 40 30 0 LBS./ EACH.03.04.07.0.9.30.67.78.30 Tee 590 2855 590 2869 590 2904 590 2939 590 2974 590 3009 590 3037 590 3065 NOM. SIZE - 2 3 4 MAX. WORKING PSI @ 73 F 390 300 240 220 70 40 30 0 LBS./ EACH.04.06.09.5.34..60 2.20 Male Adapter 590 0384 590 049 590 0454 590 0524 590 0559 590 0594 590 0622 NOM. SIZE - 2 3 4 MAX. WORKING PSI @ 73 F 300 240 220 70 40 30 0 LBS./ EACH.03.04.08.3.9.55.83 Coupler 590 070 590 084 590 9 590 54 590 224 590 259 590 273 590 287 590 35 NOM. SIZE - 2 2-3 4 MAX. WORKING PSI @ 73 F 390 300 240 220 70 40 30 0 LBS./ EACH.02.03.05.08.5.20.47.55.83 Female Adapter 590 0020 590 0034 590 0069 590 004 590 039 590 074 590 0202 590 0230 NOM. SIZE - 2 3 4 MAX. WORKING PSI @ 73 F 390 300 240 220 70 40 30 0 LBS./ EACH.02.05.08.3.27.43.05.62 Reducer Bushing 590 434 590 469 590 574 590 609 590 644 NOM. SIZE x x - x - x - 2 x - MAX. WORKING PSI @ 73 F 240 220 80 70 40 LBS./ EACH.03.04.07.4.6 Cap 590 384 590 329 590 3254 590 3289 590 3303 590 333 590 3359 NOM. SIZE - 2 3 4 MAX. WORKING PSI @ 73 F 300 240 220 70 40 30 0 LBS./ EACH.02.04.06..6.48.74 Ratings shown are for water non-shock at 73 F.

Other products from NewAge Industries Urebrade Braid Reinforced Polyurethane Hose Resistant to weathering, tearing, impact, abrasion, radiation exposure, oils, greases, and fuels Open mesh polyester braiding incorporated within the wall of flexible, etherbased polyurethane Contains no plasticizers Naturally transparent for visual contact with the flow or opaque black Nylobrade Clear Braid Reinforced PVC Hose Offers far higher pressure capabilities than unreinforced PVC tubing Open mesh polyester braiding permanently encapsulated in walls of clear, flexible PVC tubing Made from non-toxic ingredients conforming to USP Class VI and FDA standards Crystal clear compound provides full visual flow Mirror smooth interior permits outstanding flow characteristics Silbrade Braid Reinforced Silicone Hose Made from FDA-sanctioned ingredients Able to resist extreme temperature variation: -80 F to 3 F Odorless, tasteless, and inert Excellent weatherability properties resists U.V., ozone, gases, moisture, and extreme temperatures Listed by the National Sanitation Foundation (NSF 5) Ask for our latest catalog Inside you ll find details on all of NewAge Industries tubing and hose products, plus Chemical Resistance Charts, Temperature and Measurement Conversions, and a Glossary. The custom section highlights thermal tube bonding, heat-formed shapes, coiling, and other fabrication services. Plastic and metal fittings and clamps are also included. Contact your NewAge Industries sales representative or local distributor to request a free copy. Clear-40, Nylobrade, Silbrade, Urebrade, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2004 7//04 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Polyethylene-Lined EVA Co-Extruded Tubing of Polyethylene & EVA Fluid Transfer Specialists

Polyethylene-Lined EVA Co-Extruded Tubing of Polyethylene & EVA Made from Class VI, FDA-sanctioned ingredients for use with food and beverage contact surfaces Natural translucent color for visual contact with the flow Remains flexible at temperatures from -29 F to 60 F Non-toxic; odorless, tasteless, and inert Remains pliable even after extended contact with alcohol Good weatherability properties resists U.V., ozone, gases, and moisture Low friction coefficient and excellent chemical resistance allows easy passage of solids, alcohols, acids, caustics and solvents Notes PE-LINED EVA (Ethylene Vinyl Acetate) tubing is designed for use where high purity is required. It also offers excellent chemical resistance and non-toxicity, while main-taining good flexibility. A co-extruded product, PE-LINED EVA is made of a low density polyethylene liner with an EVA outer jacket. It is manufactured in a patented process (Patent No. 40646) to ensure the highest bond quality possible. PE-LINED EVA tubing meets Class VI requirements and is suitable for use in poultry and meat processing. PE- LINED EVA also meets or exceeds standards in National Formulary, Vol. 4 for containers for injectables (plastics). This product is an excellent substitute for PTFE, at working temperatures below F, with cost savings of % or more. For working temperatures up to 80 F and greater stress resistance, ask about irradiated PE-LINED EVA tubing. Physical Properties** PE Core EVA Cover Hardness, Shore D Hardness, Shore A 80 Tensile Strength, psi 2 0 Elongation at Break, % 5 7 Brittle Temperature, F -29-59 Max. Operating Temp., F 60 60 Color Translucent Translucent **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. 40 0047* 40 0075 40 03 40 025 40 0243* 40 027* 40 0327 40 0467 40 0495 ID *Limited stock availability; lead times and minimums may apply call for details. Sold by standard coil length only ( ft.). Add length suffix to part number when ordering. Example: ft. of ID x OD tubing is part number 40 0075-. BOLD indicates the critical dimension for fittings application. Recommended Fittings & Clamps Newloc push-to-connect fittings Thermobarb barbed fittings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps Additional Services OD 3/6 - WALL /32 WORKING PSI AT 70 F 43 7 60 66 32 39 28 BURST PSI AT 70 F 29 23 80 98 96 8 84 LBS. PER FT..62.5 2.49 3.49 7.99 4.48 0.00 3.96 7.96 Newloc, Kwik Clamp, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2004 4/04 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Zelite Linear Low Density Polyethylene Tubing Fluid Transfer Specialists

Zelite Linear Low Density Polyethylene Tubing Made from non-toxic ingredients conforming to FDA standards Does not impart a taste or odor to critical streams Flexible, lightweight, durable Translucent natural or opaque colors Made from % virgin grade raw materials Good dielectric properties Offers enhanced resistance to stress cracking Chemically inert; forms a good barrier to gases, vapors, and moisture Notes ZELITE conforms to the applicable regulations of the FDA for use of articles intended for contact with food. The increased tensile strength of ZELITE Linear Low Density, over that of a low density polyethylene, enhances its resistance to splitting during use. FEP-lined polyethylene, offering superior purity at a very reasonable cost, is available through minimum order. Medium-high and ultra-high density polyethylene material is available through minimum order. Call for details on these custom products. Physical Properties** Hardness, Shore D ±5 Tensile Strength, psi 22 Elongation at Break, % 600 Brittle Temperature, F -76 Vicat Softening Point, F 96 Maximum Operating Temperature, F 40 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Recommended Fittings Newloc push-to-connect fittings NATURAL 25 057 25 057 25 0256 25 0256 25 0886 25 0886 25 20 25 20 25 246 25 246 25 2293 25 2398 25 273 25 288 25 2923 25 3028 25 333 RED 25 0606 25 236 BLACK 25 0529 25 024 25 59 25 204 25 2279 YELLOW 25 0627 25 257 ID.70.70 3/6 3/6 7/8 - - ID.70 OD 5/6 5/6 - - - OD WALL.040.040 STD. LENGTH (FT.) 0 0 0 0 0 WORKING PSI AT 70 F 35 35 80 80 40 40 20 20 90 90 70 60 90 45 72 59 WORKING PSI AT 70 F 35 20 BURST PSI AT 70 F 540 540 720 720 560 560 480 480 360 360 280 240 360 80 288 236 200 BURST PSI AT 70 F 540 480 LBS. PER FT..05.05.47.47 2.0 2.0 2.5 2.5 3.5 3.5 4.4 5.4 3.7 7.4 7.6 2.5 25.5 Add length suffix to part number when ordering. Example: 0 ft. of.70 I.D. x O.D. black color tubing is part number 25 0529-0. BOLD indicates the critical dimension for fittings application. GREEN 25 0557 25 87 BLUE 25 0543 25 73 ID.70 OD WALL.040 WALL.040 WORKING PSI AT 70 F 35 20 BURST PSI AT 70 F 540 480 LBS. PER FT..05 2.5 LBS. PER FT..05 2.5 Red, yellow, green, and blue color tubing is sold by standard coil length only (0 ft.). Add length suffix to part number when ordering. Example: 0 ft. of.70 I.D. x O.D. red color tubing is part number 25 0606-0. BOLD indicates the critical dimension for fittings application. Additional Services Zelite, Newloc, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2004 4/04 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Hytrel-Lined PVC Co-Extruded Tubing of Hytrel & PVC Fluid Transfer Specialists

Hytrel -Lined PVC Co-Extruded Tubing of Hytrel & PVC Made from FDA-sanctioned ingredients Hytrel core resists high temperatures and oils, making it ideal for hot beverage vending machine applications Low permeability to refrigerant gases and hydrocarbons Odorless, tasteless, and inert Good weathering properties resists U.V., ozone, gases, moisture, and temperatures Low adherence of particulates ideal for air sampling applications Notes HYTREL-LINED PVC TUBING is designed to offer the flexibility and durability of PVC tubing with a liner of inert, DuPont Dow Elastomers Hytrel for additional resistance to oils, high temperatures, and gas permeability. A patented process molecularly bonds liner and jacket to make a virtually inseparable product. This cost-saving co-extrusion permits HYTREL-LINED PVC to be substituted for conventional reinforced PVC hose in many applications. The Hytrel polyester core offers internal resistance to chemical attack, abrasion, and contamination, along with a high degree of resistivity to adherence of particulates, making HYTREL-LINED PVC exceptionally suited for use in air sampling applications. HYTREL-LINED PVC TUBING s black PVC jacket offers excellent resistance to abrasion and oils, as well as U.V. The pliable PVC also provides a degree of shock resistance and insulates the tubing from electronic interference. HYTREL-LINED PVC TUBING is made of FDA-sanctioned ingredients for use with food contact surfaces. It may be autoclaved one time only at 2 F (steam) for 5 minutes. Physical Properties** Hytrel Core PVC Cover Hardness, Shore D 55 Hardness, Shore A 80 Tensile Strength, psi 5200 2000 Elongation at Break, % 4 400 Brittle Temperature, F -5-4 Max. Operating Temp., F 60 60 Color Gray Black **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. 43 009 43 033 43 027 ID.70 Recommended Fittings & Clamps Thermobarb barbed fittings Newloc push-to-connect fittings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps Additional Services OD WALL.040 STANDARD LENGTH (FT.) 0 0 2 LBS. PER FT..92 3.30 4.80 Sold by standard coil length only. Add length suffix to part number when ordering. Example: 0 ft. of.70" ID x OD tubing is part number 43 009-0. BOLD indicates the critical dimension for fittings application. Kwik Clamp, Newloc, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Hytrel reg. TM DuPont Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2006 4/06 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Hot Bond Thermally Bonded Tubing & Hose Fluid Transfer Specialists

Hot Bond Thermally Bonded Tubing & Hose HOT BOND is a process by which thermoplastic tubing or hose is bonded together using a proprietary heat process into a neat ribbon, offering the uncommon combination of reduced cost and improved aesthetics to your product. No solvents, which could migrate and cause contamination of adjoining surfaces or materials, are used in the bonding process. The blend of the HOT BOND process and NewAge Industries vast tubing and hose inventory provides faster delivery at a lower cost than a typical custom extrusion. Prototyping is easy, and both long and short runs are equally cost effective and welcome. Various sizes, quantities, and configurations make it easy to design HOT BOND into a new product or to retrofit an existing item. Why HOT BOND? Saves time and money on installation. By eliminating the repetitive effort needed for multiple routing during installation, a savings of % or more can be realized. A neat appearance. HOT BOND visually shows your attention to design while enhancing the overall quality of your product. Easier line traceability. Quick troubleshooting translates into saved time and expense. Saves space. A ribbon of bonded tubing and hose is more exact in dimension than a bundle, permitting a more compact design. HOT BOND is available only from NewAge Industries, the Fluid Transfer Specialists. Choose Your Bond Strength PERMANENT BOND Offering maximum durability, permanently bonded tubing and hose will not separate without cutting tools (which should be used carefully to leave the tubing or hose wall undamaged). STRIPPABLE BOND Provides flexibility during installation by permitting separation of individual tubes from the ribbon for fitting purposes. Tools are typically not needed simply twist the tubing or hose at the bond and peel back a quick and easy process. NEW SKIP BOND Lengths of bonded material alternate with unbonded sections at regular intervals that you specify. Reducing the cost of tubing and hose installations is only part of the story. HOT BOND helps to promote quality and value in your product by exhibiting a clean, well-organized look.

Hot Bond Thermally Bonded Tubing & Hose The HOT BOND process can be applied to either stock tubing or hose or to custom extrusions. NewAge Industries can HOT BOND reinforced hose to unreinforced tubing, half inch to three quarter inch sizes, colored to clear the choices are nearly endless. We can then cut, coil, strip back, or assemble as necessary. The final product can be finished as needed. Trace lines quickly and easily with different colors. Below at right are some typical configurations to use as a reference. If you don t see what you need, call your representative to custom configure the product for you. Two or more tubes are possible Twin, triple, coiled... HOT BOND is always made to your specs. Fig. Fig. 2 Fig. 3 Fig. 4... and other configurations, up to a maximum finished width of 2- NewAge Industries fabrication engineers can HOT BOND your supplied electrical wire and light cable to tubing or hose to meet the needs of electropneumatic service. Standard PVC or fluoropolymer jacketed wires can be mated to tubing or hose of similar material to meet your requirements. Contact your representative for details and assistance. Simplify your electropneumatic connections. A cleaner, easier-to-manage, faster installation will give your product the competitive edge. Electrical lines, from jacketed light gauge wire to cable (customer supplied), can be bonded to tubing and hose of similar material. Contact your NewAge Industries representative to obtain a quotation for Hot Bond or Electric Hot Bond.

Other custom options Heat-Formed Shapes What Shape Do You Need? Elbows, twists, flared ends, curves, double and triple bends, combinations of these Manufactured to your exact specifications Helps eliminate problems such as pinching or kinking Quick delivery using stock tubing and hose products Hose Assemblies Made to Specifications Combine our broad line of stocked tubing, hose, and fittings for quick delivery Finished assemblies arrive ready to install for reduced labor time and cost Statistical Process Control (SPC) procedures ensure top quality % leak testing available Fabrication Services Cutting, Printing, Sleeving, More Repetitive cutting to your specs Use printing and striping to tailor the look of your company s products For high temperature and wear protection, choose custom sleeving Other options include hole punching, slitting, specially-formed ends, assemblies Products can even be custom packaged to suit your needs Ask for our latest catalog Inside you ll find details on all of NewAge Industries tubing and hose products, plus Chemical Resistance Charts, Temperature and Measurement Conversions, and a Glossary. The custom section highlights thermal tube bonding, heat-formed shapes, coiling, and other fabrication services. Plastic and metal fittings and clamps are also included. Contact your NewAge Industries sales representative or local distributor to request a free copy. Hot Bond, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2004 4/04 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Dip Molded Tubing Custom Molded Tubing & Assemblies Fluid Transfer Specialists

Dip Molded Tubing Custom Molded Tubing & Assemblies Custom molded tubing parts manufactured from PVC-based plastisol Dip molded method for consistent interior dimensions and even flow Stops leaks by eliminating typical tubing and fitting connections Addresses problems concerning labor assembly costs and time Improves aesthetics one molded part is more finished and professional than multiple tubing and fitting connections held together by clamps Only one part to be inventoried instead of tubing, fittings, and clamps Offers unimpeded fluid or air flow for better performance no connections to obstruct flow Variety of grades available FDA, 3A, NSF, UL Designs can range from simple to complex Saves space in tight areas Can reduce the overall weight of assemblies Notes Dip Molded Tubing provides flexibility in both design and the finished product. The PVC-based material is versatile and offers flexibility, antimicrobacterial additives for various grades (FDA, 3A, NSF, and UL), and the availability of Pantone colors to match or differentiate from other equipment. Several Shore A durometer hardnesses are offered. The technical specifications, chemical resistance, and pressure capabilities of Dip Molded Tubing are equal to those of PVC material at the same hardness value. Each part is custom engineered and manufactured to best meet an application s requirements. Typical uses include manifolds, dispensing equipment, fluid delivery and mixing systems, appliances, general air or fluid transfer, supply and drain lines, and more. Contact NewAge Industries today to discuss your application. Additional Services NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2005 3/05 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Molded Silicone Components Platinum Cured, Class VI Silicone Fluid Transfer Specialists

Molded Silicone Components Platinum Cured, Class VI Silicone Molded assemblies, bottle stoppers, and other custom parts Silicone elastomer meets Class VI and FDA standards Ideally suited for medical, biomedical, and laboratory applications Manufactured in a clean room environment Biologically safe Smooth, gap-free surfaces for a true seal Autoclavable, sterilizable, and reusable No taste or odor transfer Excellent chemical resistance properties Notes Molded Silicone Components from NewAge Industries offer longer life expectancy, more consistent performance, and higher purity than parts made from rubber or similar materials. They resist cracking and particle migration to maintain a secure, sealed environment. These products are not intended for implantation or continuous steam applications. See Additional Notes at right for product-specific information. Physical Properties** Temperature Range, F - to 400 Temperature Range, C -73.3 to 204.4 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Additional Services Additional Notes Molded Silicone Assemblies eliminate entrapment issues and leaks associated with barb-style fittings. The all-in-one component reduces end-user assembly time and improves cleanliness. Molded assemblies are available in mini and standard Tri-Clamp fitting styles and are supplied with male gaskets molded directly to the face of the fitting. Straight-through and step-up bore configurations are produced in sizes up to tube I.D. Protective backup cups, offered in polysulfone or series 304 stainless steel for extra durability, provide a stable clamping surface and safeguard the fittings during installation and use. All assemblies are custom made to best meet each application s requirements and incorporate either unreinforced silicone tubing or braid-reinforced silicone hose. Additional Notes Bottle Stoppers and Seals are for use with glass, different plastics, or metal. Stoppers work with various types of containers carboys, flexible container systems, laboratory apparatus and bottles, sampling and storage receptacles. Stoppers and seals are available with cored holes for tubing or vents. Sizes for stoppers range from 00 through 4. Other custom silicone components can be manufactured to your specifications call us today to discuss your needs. NewAge, Fluid Transfer Specialists, and The "N" Logo are registered trademarks of NewAge Industries, Inc. Tri-Clamp reg TM Tri-Clover Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2007 5/22/07 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Superthane Transparent Polyurethane Tubing Fluid Transfer Specialists

Superthane Transparent Polyurethane Tubing Available in Ester or Ether formulations Made from non-toxic ingredients conforming to FDA standards Transparent, flexible, resilient, tough; resistant to oils, greases, and fuels Extremely resistant to weathering, tearing, impact, radiation, and abrasion Wide range of temperature resistance: -95 F to 85 F (ester) Ether-based material is listed by the National Sanitation Foundation (NSF 6) Contains no plasticizer which could cause flow contamination or tube hardening Can be heat sealed, coiled, fabricated, or bonded Notes Hydrolytic Stability For resistance to moisture and fungi, SUPERTHANE ether is recommended. (Ester polyurethane does not react well with water, prolonged humid conditions, or attack from fungi.) Ether-based SUPERTHANE also resists attack from ultra-violet rays, making it a good material for outside use. The material used in its manufacture is listed by the National Sanitation Foundation (NSF 6). SUPERTHANE is much more resistant to pressure and vacuum applications than corresponding sizes of PVC or rubber. Although polyurethane is commonly used in fuel applications, due to additives in today s gasoline and petroleum products, field testing should be performed. When used with Thermobarb fittings, SUPERTHANE will not require clamps, provided that working pressures remain at or below 05 psi at ambient temperature. Custom coiled polyurethane is available call for details. For easy identification, SUPERTHANE is imprinted with the trademarked name. Physical Properties** ESTER ETHER Hardness, Shore A ±5 85 85 Tensile Strength, psi 6000 50 Elongation at Break, % 5 580 Brittle Temperature, F -95-90 Maximum Operating Temp., F 85 75 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Additional Services Recommended Fittings & Clamps Thermobarb barbed fittings Cam operated couplings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps

Superthane Transparent Polyurethane Tubing ESTER 200 0075 200 052 200 052 200 0229 200 0383 200 0460 200 0537 200 0768 200 0845 200 0999 200 0999 200 076 200 53 200 230 200 307 200 384 200 46 200 65 200 692 200 692 200 846 200 2000 200 2077 200 223 200 2385 200 2539 ETHER 20 0070 20 0070 20 047 20 0224 20 0455 20 0455 20 0609 20 0686 20 0840 20 097 20 48 20 48 20 225 20 302 20 533 20 533 20 60 20 687 20 764 20 84 20 98 20 995 20 2072 20 2226 20 2380 20 2534 20 2688 ID.70 3/6 3/6 3/6 5/6 5/6 5/6 7/6 7/8-2 OD 3/6 3/6 5/6 5/6 5/6 7/6 9/6 9/6 3/6 7/8 5/6 - - - 2- WALL /32 /32 /32 /32.040 /32 /32 3/32 3/32 3/32 3/32 3/32 STANDARD LENGTH (FT.), 00 0 3000, 0 0, 0 0, 0 0 0 300,,,,,,,,, 25,, 25, WORKING PSI AT 70 F 35 35 72 72 30 70 27 74 74 33 67 3 3 65 75 8 59 59 84 80 36 36 36 48 60 40 54 60 43 5 33 40 3 22 BURST PSI AT 70 F LBS. PER FT. ESTER.48.79.79.92.37.3 2.55.42 3.9 7.66 7.66 3.83 6.24 8.93 4.47 7.6 0.22.48 5.75 5.75 2.77 0.98 5.33 7.88 20.43 22.99 Add length suffix to part number when ordering. Example: ft. of I.D. x 3/6 O.D. ester tubing is part number 200 052-. Cut coils are available from coils of ft. or less; charges apply call for details. Coils over ft. are sold by standard coil length only. Due to the coil diameter, some larger sizes must ship via truck. Tolerances: ID & OD ±3% but not less than ±.006". BOLD indicates the critical dimension for fittings application. 405 405 26 26 390 20 8 222 222 99 20 393 393 95 225 354 77 77 252 300 240 08 08 08 44 80 20 62 80 29 53 99 20 93 66 LBS. PER FT. ETHER.45.45.74.77 2.38 2.38.33 2.98 7.5 3.57 5.82 4.7 4.7 6.68 9.54 5.36 5.36 8.47.92 6.56 0.25 4.30 2.03 6.69 9.07 2.46 30.99 40.53

Recommended fittings for Superthane Thermobarb Plastic Plastic Barbed Fittings Precision molded in nylon-6, high density polyethylene, PVDF, polypropylene, glass-fiber reinforced nylon, or glass-fiber reinforced polypropylene Lightweight, compact, easy to install and disconnect High impact strength Excellent chemical resistance Thermobarb Brass Brass Barbed Fittings Formed of forged and/or machined brass Tapered pipe threads are made to Dryseal USA specifications An industrial standard use in all general purpose applications May be used in potable water systems Cam-Operated Couplings Four Plastic Materials Select from Nylon (glass-fiber reinforced), Polypropylene (glass-fiber reinforced), FDA-grade PVDF, or FDA-grade Polypropylene Much lighter weight than metal counterparts Made to MIL-C-27487 dimensions fully interchanged with other materials made to the same standards regardless of material Ask for our latest catalog Inside you ll find details on all of NewAge Industries tubing and hose products, plus Chemical Resistance Charts, Temperature and Measurement Conversions, and a Glossary. The custom section highlights thermal tube bonding, heat-formed shapes, coiling, and other fabrication services. Plastic and metal fittings and clamps are also included. Contact your NewAge Industries sales representative or local distributor to request a free copy. Kwik Clamp, Superthane, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2006 0/06 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Urebrade Transparent & Black Braid Reinforced Polyurethane Hose Fluid Transfer Specialists

Urebrade Transparent & Black Braid Reinforced Polyurethane Hose Open mesh polyester braiding incorporated within the wall of flexible, etherbased polyurethane Transparent ether-based polyurethane is made from non-toxic ingredients conforming to FDA standards and is listed by the National Sanitation Foundation (NSF 6) Offers much greater pressure capability than unreinforced polyurethane tubing Resistant to weathering, tearing, impact, abrasion, radiation exposure, oils, greases, and fuels Wide range of temperature resistance; -90 F to 75 F Contains no plasticizer which could migrate and cause flow contamination or tube hardening Naturally transparent for visual contact with the flow Opaque black color for industrial applications at a reduced price Notes Hydrolytic Stability UREBRADE is supplied in an ether formulation, making it resistant to attack from moisture and fungi. UREBRADE also resists attack from ultra-violet rays making it a good material for outside use. The compound used in UREBRADE is listed by the National Sanitation Foundation (NSF 6). Where applications involve repeated flexing, heavy vibration, or abrasion, UREBRADE offers superior service life over other materials. Ester-based UREBRADE is available through minimum order call for details. Due to additives in today s gasoline and petroleum products, field testing should be performed. For easy identification, transparent UREBRADE is imprinted with the trademarked name. Physical Properties** Hardness, Shore A ±5 85 Tensile Strength, psi 50 Elongation at Break, % 580 Brittle Temperature, F -90 Max. Operating Temperature, F 75 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Recommended Fittings & Clamps Thermobarb barbed fittings Cam operated couplings SafeAir fittings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps UREBRADE - TRANSPARENT 220 0072 220 049 220 0226 220 0303 220 0380 220 0457 220 0534 220 06 220 0688 ID - - 2 OD.470.630.905.025.300.70.930 2- WALL.0.28 9/64.38..230.25 STANDARD LENGTH (FT.),, 25,, 25,, 25,, 25,, 25,, 25,, 25,, WORKING PSI AT 70 F 2 90 30 80 75 40 BURST PSI AT 70 F 0 760 600 520 400 320 300 200 60 LBS. PER FT. 6.04 9.78.92 6.34 8.62 26.32 5.94 56.26 85.82 Add length suffix to part number when ordering. Example: ft. of I.D. x.470 O.D. transparent hose is part number 220 0072-. Cut coils available; charges apply call for details. Due to the coil diameter, some larger sizes must ship via truck. BOLD indicates the critical dimension for fittings application. UREBRADE - OPAQUE BLACK 22 0075 22 052 22 0229 22 0306 22 0383 ID OD 7/8 - WORKING PSI AT 70 F 225 75 35 0 90 LBS. PER FT. 6.04 9.78.92 6.34 8.62 Add length suffix to part number when ordering. Example: ft. of I.D. x O.D. opaque black hose is part number 22 0075-. Cut coils available; charges apply call for details. Due to the coil diameter, some larger sizes must ship via truck. BOLD indicates the critical dimension for fittings application. Additional Services WALL 5/32 STANDARD LENGTH (FT.),, 25,, 25,, 25,, BURST PSI AT 70 F 900 700 540 440 360 Kwik Clamp, SafeAir, Thermobarb, Urebrade, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2006 4/06 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Superthane Pneumatic Colored Polyurethane Tubing for Pneumatics Fluid Transfer Specialists

Superthane Pneumatic Colored Polyurethane Tubing for Pneumatics Made from hydrolysis resistant, 85A durometer Ether polyurethane Stocked in 0 colors for easy multiple line identification Can be bonded into a multiple tube ribbon Clamps not required when used with properly designed barbed fittings at pressures of 05 psi or less Naturally flexible for close-in bending contains no plasticizers which could migrate and cause tube hardening or flow contamination Resistant to weathering, kinking, tearing, abrasion, impact, and radiation exposure Wide range of temperature resistance: -90 F to 75 F SUPERTHANE PNEUMATIC Transparent Colors RED 2 0605 2 235 YELLOW 2 0626 2 256 BLUE 2 0535 2 65 ID OD WALL /32 STANDARD LENGTH (FT.), 0, 0 WORKING PSI AT 70 F 35 30 BURST PSI AT 70 F 405 390 Notes Ether-based SUPERTHANE PNEUMATIC tubing is resistant to attack from moisture, humidity, and fungi. SUPERTHANE PNEUMATIC has excellent cold temperature flexibility and virtually unlimited flexural life. The superior strength of SUPERTHANE PNEUMATIC makes it more resistant to pressure and vacuum than corresponding sizes of PVC or rubber. When used with Thermobarb fittings, SUPERTHANE PNEUMATIC will not require clamps, provided that working pressures remain at or below 05 psi at ambient temperature. The ether-based material used in SUPERTHANE PNEUMATIC is listed by the National Sanitation Foundation (NSF 6). Physical Properties** Hardness, Shore A ±2 85 Tensile Strength, psi 50 Elongation at Break, % 580 Brittle Temperature, F -90 Maximum Operating Temp., F 75 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Recommended Fittings & Clamps Thermobarb barbed fittings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps GREEN 2 0563 2 0563 2 93 2 93 SUPERTHANE PNEUMATIC Opaque Colors GRAY 2 200 BROWN 2 72 CLEAR 20 0070* 20 0224* BLACK 2 0528 2 58 ORANGE 2 22 Additional Services WHITE 2 069 2 249 ID ID ID OD OD OD WALL /32 /32 WALL /32 STANDARD LENGTH (FT.) 0 0 STANDARD LENGTH (FT.), 0, 0 STANDARD LENGTH (FT.), 0 WORKING PSI AT 70 F 35 30 WORKING PSI AT 70 F 30 BURST PSI AT 70 F 405 405 390 390 *Longer lengths also available 20 0070 in 0 and 00 ft.; 20 0224 in 0 ft. Sold by standard coil length only.,000 ft. lengths are supplied on spools. Add length suffix to part number when ordering. Example: ft. of I.D. yellow tubing is part number 2 0626-. Weight, lbs. per ft.: I.D. tubing =.45; I.D. tubing =.79 BOLD indicates the critical dimension for fittings application. WALL WORKING PSI AT 70 F 35 35 30 30 Sold by standard coil length only.,000 ft. lengths are supplied on spools. Add length suffix to part number when ordering. Example:,000 ft. of I.D. gray tubing is part number 2 200-0. Weight, lbs. per ft.: I.D. tubing =.45; I.D. tubing =.79 BOLD indicates the critical dimension for fittings application. BURST PSI AT 70 F 405 390 BURST PSI AT 70 F 390 Kwik Clamp, Superthane, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2006 4/06 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Medical Silicone Tubing & Hose Peroxide or Platinum Cured Fluid Transfer Specialists

Silbrade Medical Medical Grade Braid Reinforced Silicone Hose Open mesh polyester braiding incorporated within the walls of silicone tubing Silicone elastomer meets USP Class VI and NSF-5 requirements Translucent natural color for visual contact with the flow Able to resist extreme temperature variation: -80 F to 3 F Odorless, tasteless, and inert All ingredients are non-toxic and FDA-sanctioned for use with food contact surfaces Manufactured under strict Good Manufacturing Procedures in a controlled environment Notes SILBRADE MEDICAL s construction consists of a core of silicone elastomer, an open polyester braid reinforcing layer, and a cover layer of silicone elastomer. Good Manufacturing Procedures, including lot traceability, are applicable to all Class VI ingredients. SILBRADE MEDICAL a peroxide-cured product. The hose s smooth bore, coupled with its resistance to allow material to adhere to the tube wall, facilitates easy cleaning and system purging. SILBRADE MEDICAL is not recommended for implantable or in-body uses or for continuous steam applications. SILBRADE MEDICAL may be low pressure sterilized in-line or autoclaved up to 2 F in a normal autoclaving cycle. If exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced. Care is recommended in the selection and application of fittings and clamps, as sharp barbed fittings or unlined clamps could tear into the hose wall and possibly cause a failure, especially at elevated pressures. Peroxide-cured SILBRADE MEDICAL hose is supplied in individual, non-sterile, heat-sealed polybags and should be sterilized prior to use. A platinum-cured, braid-reinforced medical grade silicone hose is available. Minimum quantities apply; call for price and delivery. Physical Properties** Hardness, Shore A ±5 Core 70 Hardness, Shore A ±5 Cover 60 Tensile Strength, psi 0 Elongation at Break, % 3 Brittle Temperature, F -80 Maximum Operating Temperature, F 3 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. 29 080 29 0257 29 0334 29 04 29 0488 29 0565 29 079 29 0873 ID 3/6 5/6 OD.365.447.520.592.655.800..380 Additional Services WALL.20.30.35.40.40..75.90 WORKING PSI AT 70 F 233 26 208 83 66 4 9 75 BURST PSI AT 70 F* 699 648 624 549 498 423 273 225 LBS. PER FT. Sold by standard coil length only (25 ft.). Add length suffix to part number when ordering. Example: 25 ft. of I.D. hose is part number 29 080-25. *Burst pressures can be expected to decrease by at least 20% for each 200 F increase up to 3 F. BOLD indicates the critical dimension for fittings application. Recommended Fittings & Clamps Thermobarb barbed fittings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps 5 7 9 3 7 28 36

Silcon Medical Medical Grade Silicone Tubing Silicone elastomer meets USP Class VI and NSF-5 requirements Manufactured under strict Good Manufacturing Procedures in a controlled environment Reusable will withstand repeated sterilization Nonreactive to body tissues and fluids Translucent natural color for visual contact with the flow Odorless, tasteless, and inert All ingredients are non-toxic and FDA-sanctioned for use with food contact surfaces May be used on peristaltic pumps 28 0304 28 038 28 0458 28 0689 28 0766 28 0843 28 0920 28 0997 28 29* 28 5 28 228 28 305 28 382 28 459 28 536 28 63 28 690* 28 844 28 92* SUGGESTED PUMP SIZES Recommended Fittings & Clamps Thermobarb barbed fittings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps Additional Services ID.030 /32.040 5/64.04 3/6 3/6 5/6 5/6 OD.065 5/32.085 3/6.92 5/6 5/6 7/6 7/6 WALL.08.023 /32.024.044 3/32 3/32 3/32 3/32 *Limited stock availability; lead times and minimums apply call for details. Sold by standard coil length only. Add length suffix to part number when ordering. Example: ft. of.030 I.D. x.065 O.D. tubing is part number 28 0304-. Most common peristaltic pump sizes based on I.D. and wall requirements. BOLD indicates the critical dimension for fittings application. STANDARD LENGTH (FT.) 25 25 25 25 25 25 Notes SILCON MEDICAL tubing is made under strict Good Manufacturing Procedures and conforms to the biocompatibility requirements of USP Class VI. SILCON MEDICAL s surface properties resist sticking and encrustation, and will not support bacteria growth. The tubing is soft, pliable, and contains no plasticizers which could leach out, causing flow contamination or tube hardening. SILCON MEDICAL is not recommended for implantable or in-body uses or for continuous steam applications. Care is recommended in the selection and application of fittings and clamps as sharp barbed fittings or unlined metal clamps could tear into the tubing wall. If exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced. Peroxide-cured SILCON MEDICAL tubing is supplied in individual, non-sterile, heat-sealed polybags and should be sterilized prior to use. Physical Properties** Hardness, Shore A ±5 60 Tensile Strength, psi 200 Elongation at Break, % 425 Tear Resistance, Die B 20 Brittle Temperature, F - Maximum Operating Temperature, F 400 Comp. Set, 22 hrs. at 3 F, % 35 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application.

Silcon Med-X Platinum Cured Medical Grade Silicone Tubing Silicone elastomer meets USP Class VI requirements Manufactured under strict Good Manufacturing Procedures in a controlled environment Platinum cured for the highest degree of purity (least extractables) Reusable will withstand repeated sterilization Nonreactive to body tissues and fluids Applications include pharmaceutical, biomedical, health and beauty, food, and beverage handling Notes SILCON MED-X tubing is made under strict Good Manufacturing Procedures and conforms to the biocompatibility requirements of USP Class VI. SILCON MED-X s surface properties resist sticking and encrustation and will not support bacteria growth. The tubing is soft, pliable, and contains no plasticizers which could leach out, causing flow contamination or tube hardening. Other sizes and 60A durometer material are also available call for details. SILCON MED-X is not recommended for implantable or in-body uses or for continuous steam applications. Care is recommended in the selection and application of fittings and clamps as sharp barbed fittings or unlined metal clamps could tear into the wall. If exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced. SILCON MED-X is supplied in individual, heat-sealed polybags and should be sterilized prior to use. Physical Properties** Hardness, Shore A ±5 Tensile Strength, psi Elongation at Break, % 6 Modulus at % 20 Tear Resistance, Die B ppi 200 Temperature Range, F - to 400 Temperature Range, C -73.3 to 204.4 Compression Set, % 35 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. 284 0404 284 0677 284 0684 284 069 284 097 284 0978 284 0985 284 74 284 8 284 272 284 279 284 286 284 370 284 377 284 468 284 475 284 482 284 580 284 678 Recommended Fittings & Clamps Thermobarb barbed fittings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps Additional Services ID.030 3/6 3/6 5/6 5/6 OD.60 3/6 3/6 5/6 5/6 7/6 7/6 9/6 7/8 WALL.065 /32 3/32.032 3/32 3/32 3/32 3/32 3/32 Sold by standard coil length ( ft); additional lengths may be available call for details. Add length suffix to part number when ordering. Example: ft. of.030 I.D. x.60 O.D. tubing is part number 284 0404-. BOLD indicates the critical dimension for fittings application. Silbrade, Silcon, Kwik Clamp, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2007 5/2/07 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Silvac Polyester & Wire Reinforced Silicone Suction Hose Fluid Transfer Specialists

Silvac Polyester & Wire Reinforced Silicone Suction Hose Polyester woven fabric and spiral 36 stainless steel wire reinforcement in walls of silicone elastomer Offers full vacuum capability at high temperatures (29.9 in./hg.) Able to resist extreme temperature variation: -80 F to 3 F Odorless, tasteless, and inert All ingredients are non-toxic and FDA-sanctioned (CFR 77.2600) for use in food contact surfaces Crush and kink resistant yet flexible Manufactured in a controlled environment on dedicated equipment Notes SILVAC offers the excellent temperature resistance of silicone in a vacuum-rated hose (29.9 in./hg at 70 F). The hose construction allows strong vacuum at elevated temperatures; sample testing is recommended. The construction consists of mandrel-wrapped layers of polyester-reinforced silicone elastomer incorporated around a spiral-wound stainless steel reinforcing wire, making SILVAC crush and kink resistant yet flexible. SILVAC is a platinum-cured hose, thus reducing extractables. Peroxide-cured product is available through minimum order. SILVAC is not recommended for implantable or in-body uses or for continuous steam applications. SILVAC may be low pressure steam sterilized inline or autoclaved up to 2 F in a normal autoclaving cycle. Its smooth core facilitates easy cleaning and system purging. However, if exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced. Care is recommended in the selection and application of fittings and clamps as sharp barbed fittings or unlined metal clamps could tear into the hose wall and possibly cause a failure. Each length of SILVAC is individually packaged in a heat-sealed polybag and should be sterilized prior to use. Additional Services Silvac, Kwik Clamp, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2007 5/2/07 DISTRIBUTOR NER 293 008 293 058 293 0235 293 0389 293 0543 ID - 2 OD.920.70.420.920 2.420 WALL.220.220.220.220.220 45 James Way Southampton, PA 8966 WORKING PSI AT 70 F 25 BURST PSI AT 70 F* 600 600 600 600 0 LBS. PER FT. 29 38 70 9 Sold by standard length only (2 ft). Add length suffix to part number when ordering. Example: 2 ft. of " I.D. Silvac is part number 293 008-2. *The burst pressure can be expected to decrease by at least 20% for each 200 F increase up to 3 F. BOLD indicates the critical dimension for fittings application. Recommended Fittings & Clamps Cam operated couplings Thermobarb barbed fittings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps Physical Properties** CORE COVER Hardness, Shore A ±5 70 70 Tensile Strength, psi 200 Elongation at Break, % 3 425 Brittle Temperature, F -80-80 Max. Continuous Op. Temp., F 3 3 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Silbrade & Silcon Silicone Hose & Tubing Fluid Transfer Specialists

Silbrade Braid Reinforced Silicone Hose Open mesh polyester braiding incorporated within the walls of silicone tubing Made from FDA-sanctioned ingredients Translucent natural color for visual contact with the flow Able to resist extreme temperature variation: -80 F to 3 F Odorless, tasteless, and inert Excellent weatherability properties resists U.V., ozone, gases, moisture, and extreme temperatures Offers far higher pressure capabilities than similarly-sized unreinforced silicone tubing Listed by the National Sanitation Foundation (NSF 5) Notes The construction of SILBRADE enables silicone tubing to handle increased pressure applications. SILBRADE offers outstanding resistance to temperature extremes and is made from FDAsanctioned ingredients. The flexible design and construction of SILBRADE also allows excellent bend radii and permits installation in restricted spaces without impeding flow. SILBRADE, a peroxide-cured product, contains no sulphur or other acid-producing chemicals thereby eliminating the possibility of staining, corroding, or deteriorating other materials it contacts. It is also resistant to ozone and U.V. over long time periods. Care is recommended in the selection of fittings and clamps, as sharp barbed fittings or unlined metal clamps could tear into the hose wall and possibly cause a failure, especially at elevated pressures. SILBRADE is not recommended for implantable or in-body uses or for continuous steam applications. SILBRADE may be low pressure steam sterilized in-line or autoclaved at up to 2 F in a normal autoclaving cycle. However, if exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced. Physical Properties** Hardness, Shore A ±5 Core 70 Hardness, Shore A ±5 Cover 60 Tensile Strength, psi 0 Elongation at Break, % 3 Brittle Temperature, F -80 Maximum Operating Temperature, F 3 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. 290 0072 290 049 290 0226 290 0303 290 0380 290 0457 290 0534 290 06 290 0765 ID 3/6 5/6 OD.365.447.520.592.655.800.965..380 WALL.20.30.35.40.40..70.75.90 Additional Services STANDARD LENGTH (FT.) WORKING PSI AT 70 F 233 26 208 83 66 4 6 9 75 Recommended Fittings & Clamps Thermobarb barbed fittings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps BURST PSI AT 70 F* 699 648 624 549 498 423 348 273 225 LBS. PER FT. 5 7 9 3 7 23 28 36 Cut coils are available; charges apply call for details. Add length suffix to part number when ordering. Example: ft. of I.D. x.365 O.D. hose is part number 290 0072-. *The burst pressure can be expected to decrease by at least 20% for each 200 F increase up to 3 F. BOLD indicates the critical dimension for fittings application.

Silcon Silicone Tubing Made from FDA-sanctioned ingredients Able to resist extreme temperature variation: - F to 0 F Translucent natural color for visual contact with the flow Resilient, stretchable, and resistant to compression set Odorless, tasteless, and inert Good electrical and weatherability properties resists U.V., ozone, gases, and moisture Listed by the National Sanitation Foundation (NSF 5) 280 0084 280 06 280 035 280 0392 280 0469 280 0546 ID 3/32 3/32 OD 3/6 5/32 7/32 3/6 STANDARD LENGTH (FT.) WORKING PSI AT 70 F* 0 20 0 5 0 20 BURST PSI AT 70 F 30 60 30 45 30 60 LBS. PER FT. 0..34 0.66.58 0.88 2.00 280 0623 5/6 25 75 3.32 280 0700 4.92 280 0854 5/32 9/32 20 60 2.4 280 093 5/32 /32 20 60 3.64 280 8 3/6 5 5.22 280 085 3/6 5/6 20 60 2.64 280 62 280 239 3/6 3/6 7/6 20 5 60 45 4.2 6.4 280 393 5/6 0 30. 280 470 5 5 3.34 280 547 7/6 20 60 5.2 280 624 280 778 280 855 280 932 280 2009 280 2086 280 263 5/6 5/6 7/6 9/6 5 0 0 0 0 0 5 45 30 30 30 30 30 45 7. 3.66 6.30 4.32 7.4 0.6 6.72 280 2240 7/6 0 30 7.70 280 237 55 5 5.84 280 2394 5 9. 280 247 0 30 3.2 280 2548 7/8 0 30 5.00 280 2625 5 6.86 280 2702 3/6 5.34 280 2779 7/8 5 5 3.38 280 2856 0 30 22.86 280 3087 5 5 7.64 280 364-0 30 26.56 Add length suffix to part number when ordering. Example: ft. of I.D. x O.D. tubing is part number 280 0084-. *Performed on hydrostatic test equipment at ambient temperature; based on the ASTM D599 method. BOLD indicates the critical dimension for fittings application. Recommended Fittings & Clamps Thermobarb barbed fittings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps Notes The most outstanding properties of SILCON are its flexibility and resistance to temperature extremes. These, plus its good electrical properties and ability to self-extinguish, make SILCON an excellent choice for appliances and computers. Peroxide-cured SILCON contains no sulphur or other acid-producing chemicals, thereby eliminating the possibility of staining, corroding, or deteriorating materials it contacts. It is extremely resistant to ozone and U.V. over long time periods. Care is recommended in the selection of fittings and clamps for SILCON as sharp barbed fittings or unlined metal clamps could tear into the tubing wall and possibly cause a failure. SILCON is not recommended for implantable or in-body uses or for continuous steam applications. SILCON may be low pressure steam sterilized in-line or autoclaved at up to 2 F in a normal autoclaving cycle. However, if exposed to repeated steam sterilization or long-term high temperature or pressure, silicone will eventually relax and become gummy. It should then be replaced. Colors for industrial applications are available through minimum order call for details. Physical Properties** Hardness, Shore A ±5 Tensile Strength, psi Elongation at Break, % 375 Brittle Temperature, F - Max. Operating Temperature, F 0 Comp. Set, 22 hrs. at 77 F, % 35 Tear Resistance (ppi minimum) Additional Services **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. When used in an NSF application, the maximum operating temperature is limited to 3 F.

Other silicone products Silbrade Medical Medical Grade Braid Reinforced Silicone Hose Open mesh polyester braiding incorporated within the walls of silicone tubing Silicone elastomer meets USP Class VI and NSF-5 requirements Able to resist extreme temperature variation: -80 F to 3 F Odorless, tasteless, and inert All ingredients are non-toxic and FDA-sanctioned for use with food contact surfaces Silcon Med-X Platinum Cured Medical Grade Silicone Tubing Silicone elastomer meets USP Class VI requirements Manufactured under strict Good Manufacturing Practices (GMP) in a controlled environment Platinum cured for the highest degree of purity (least extractables); reusable Applications include pharmaceutical, biomedical, health and beauty, food, and beverage handling Silvac Polyester & Wire Reinforced Silicone Suction Hose Polyester woven fabric and spiral 36 stainless steel wire reinforcement in walls of silicone elastomer Offers full vacuum capability at high temperatures (29.9 in./hg.) All ingredients are non-toxic and FDA-sanctioned for use in food contact surfaces Crush and kink resistant yet flexible Manufactured in a controlled environment on dedicated equipment Ask for our latest catalog Inside you ll find details on all of NewAge Industries tubing and hose products, plus Chemical Resistance Charts, Temperature and Measurement Conversions, and a Glossary. The custom section highlights thermal tube bonding, heat-formed shapes, coiling, and other fabrication services. Plastic and metal fittings and clamps are also included. Contact your NewAge Industries sales representative or local distributor to request a free copy. Silbrade, Silcon, Silvac, Kwik Clamp, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2007 5/2/07 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Vitube Flexible Tubing of Viton Fluid Transfer Specialists

Vitube Flexible Tubing of Viton Made of % pure Viton, a high performance synthetic rubber Excellent temperature resistance: -40 F to 400 F continuously; 600 F periodically Offers one of the widest ranges of fluid and chemical resistance of any commercial rubber Excellent resistance to oils, fuels, lubricants, and most mineral acids Also resistant to many aliphatic and aromatic hydrocarbons such as carbon tetrachloride, benzene, toluene, and xylene Excellent resistance to environmental exposure such as sunlight and ozone Available from stock in 60 and 75 Shore A durometers (Type B and Type A) Notes VITUBE s main attributes include exceptional chemical resistance at elevated temperatures. It has withstood continuous service temperatures of 600 F for 48 hours and 0 F for 0 hours while maintaining its mechanical properties. However, care should be taken at these elevated temperatures. Tests should be performed to determine application suitability. VITUBE possesses the high resiliency of an elastomer as well as the good mechanical properties of conventional synthetic rubbers. The heat and chemical resistance factors, however, usually go far beyond the range of other rubbers. The 60A durometer compound is specially formulated for use in peristaltic pumps. All VITUBE formulations are produced with % DuPont Dow Viton fluoroelastomers (chemical name: fluorocarbon FKM) and are matte black in color. VITUBE contains no regrind material nor blends of other elastomers. If accidental burning of VITUBE occurs, extreme caution should be taken due to Hydrogen Fluoride and other decomposition products. Avoid inhalation of vapors liberated at service temperatures above 392 F. If your application calls for harder VITUBE, 90A durometer is available call for details. Physical Properties** Type B Type A Hardness, Shore A ±5 60 75 Tensile Strength, psi 4 600 Elongation at Break, % 3 Brittle Temperature, F -40-30 Max. Operating Temp., F 400 400 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. ID OD WALL STD. LBS. 60A 75A LENGTH PER Type B Type A (FT.) FT. 260 085 260 0360* 260 0535 260 070 260 0885 260 235 260 40 260 585* 260 935 260 20* 260 280 260 2985 260 360 260 3335* 260 3685 260 3860 260 4035 260 420 260 4560 260 490 260 85* 260 092 260 0367* 260 0542 260 077* 260 0892 260 242 260 47* 260 592* 260 942 260 27* 260 287 260 2992* 260 367 260 3342* 260 3692 260 3867 260 4042* 260 427* 260 4567* 260 497* 260 92* /32 /32 3/6 3/6 5/6 3/32 5/32 3/6 5/6 5/6 7/6 7/6 9/6 7/6 9/6 7/8 /32 /32 3/32 3/32 3/32 5/32 3/32 3/6,,,,,,,,, 25, 25, 25, 25, 25, 25, 25, 25, 25 25 25 25..48.74.99 3.70 2.97 5.2 7.9 3.96 9.90 4.94 8.8.86 6.0 5.94 6.92.6 5.82 8.90 9.77 32.62 260 5785* 260 5792* 3/6 25 38.55 260 5960 260 5967 25 27.68 260 635 260 642* 7/8 25 4.83 *Limited stock item; lead times and minimums may apply call for details. These weights apply to the 60A durometer tubing; weights for 75A are slightly less. Add length suffix to part number when ordering. Example: ft. of /32 I.D. x 3/32 O.D., 60A durometer tubing is part number 260 085-. BOLD indicates the critical dimension for fittings application. Recommended Fittings & Clamps Thermobarb barbed fittings Oetiker ear type clamps Worm gear clamps Additional Services ID/OD Measurement Tolerances 0" -." ±.00.0" -.60" ±.03.6" -.2" ±.06.25" -.400" ±.020.40" -.630" ±.025.63" -.000" ±.032 Vitube, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Viton reg. TM DuPont Dow Elastomers Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2004 4/04 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

new Thermobarb FDA PP Polypropylene Barbed Y Connectors Fluid Transfer Specialists

Thermobarb FDA PP Polypropylene Barbed Y Connectors new Precision molded of FDA-approved polypropylene copolymer Meets USP Class VI standards; compliant with FDA 2 CFR 77.520 Smooth interior for unrestricted, uniform flow No mold parting lines or flashing Longer, more tapered lead barb slides easily into tubing and provides a secure attachment and reduced leakage Sterilizable by autoclave or gamma radiation Made in the U.S. at an ISO 9002:2000 certified facility Free of animal-derived ingredients Three popular sizes stocked:,, and RoHS compliant Ideal for single-use/disposable tubing assemblies Physical Properties** Hardness, Rockwell R 85 Tensile Strength, psi 44 Elongation at Yield, % 4 Working Pressure, psi, maximum with appropriate clamps Temperature Range, F 0-220 Flexural Modulus, % secant, Kpsi 40 Flexural Modulus, tangent, Kpsi 45 Haze on -mil plaque, % 3 Gardner impact @ 23 C, in-lb 235 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. 2 706 2 720 2 748 SIZE Recommended Tubing APST platinum-cured silicone tubing Silcon silicone tubing Silcon Medical silicone tubing Suprene TPR tubing Silcon, Suprene, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are registered trademarks of NewAge Industries, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2007 4/07 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Prolite Polypropylene Tubing Fluid Transfer Specialists

Prolite Polypropylene Tubing Made of NSF-6 listed, virgin Polypropylene copolymer conforming to FDA requirements for food contact surfaces Extremely lightweight, thermoformable, and weldable Very low moisture absorption High dielectric strength Meets UL94 HB burn rating Excellent chemical resistance Naturally white in color Notes PROLITE is a high-crystalline, polypropylene copolymer tubing. The compound used in its manufacture is NSF-6 listed and meets FDA requirements for food contact surfaces. It also meets the UL 94 HB burn rating. PROLITE is frequently used in food processing and other industries for clean applications. It is a naturally white, semi-rigid product offering limited ability to bend. Since it is weldable, PROLITE may be joined directly, although it is typically joined by means of a push-to-connect fitting such as Newloc. Polypropylene is the lightest of all thermoplastic materials. It offers high strengthto-weight ratio, low surface friction, and excellent resistance to corrosion. Based on its physical properties, PROLITE may be applied as a reasonably-priced alternative to fluoropolymer tubing in many applications. Physical Properties** Hardness, Rockwell R 75 Tensile Strength, psi 4000 Elongation at Yield, % 23 Deflection Temperature, F, @ 66 psi 73 Notched Izod, foot pound/inch, @ 73 F 0 Flexural Modulus, psi.6 x 0 5 Max. Operating Temp., F 25 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. 448 0070 448 047 448 0224 448 030 448 0378 448 0455 448 0609 448 065 448 0840 ID.70 3/6 OD 5/6 - WALL.040 Additional Services WORKING PSI AT 70 F 272 49 96 57 2 87 7 09 87 LBS. PER FT..5.0.9 2.4 3.4 4.4 5.3 3. 7.5 Add length suffix to part number when ordering. Example: ft. of 3/6 I.D. x 5/6 O.D. tubing is part number 448 0224-. Sizes larger than - O.D. are available call for details. Due to the coil diameter, some larger sizes must ship via truck. BOLD indicates the critical dimension for fittings application. Recommended Fittings STANDARD LENGTH (FT.) Newloc push-to-connect fittings BURST PSI AT 70 F 86 447 588 47 336 26 23 327 26 Prolite, Newloc, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2004 4/04 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Newtex Natural Latex Rubber Tubing Fluid Transfer Specialists

Newtex Natural Latex Rubber Tubing Made from natural latex rubber, a thermoset material Excellent resilience, tear, and tensile strength Made from non-toxic ingredients conforming to FDA standards Extremely elastic with excellent memory after repeated stretching Contains no plasticizers which can migrate and cause flow contamination or tube hardening NEWTEX is a translucent amber color Notes NEWTEX tubing is an exceptionally resilient material that has notable wear resistance, very low permanent set characteristics, and excellent flexibility at low temperatures. NEWTEX will withstand repeated sterilization with autoclaving at 2 F for 20 minutes. It will also endure limited sterilization with ethylene oxide or gamma radiation. Since natural rubber NEWTEX has some protein trace (an allergen), synthetic NEWTEX (polyisoprene) made without protein can be supplied through minimum order. Synthetic NEWTEX can also be cured in straight lengths call for details. Synthetic NEWTEX should also be considered for its translucency, as natural latex s amber color is quite dark. Also available through special order is vacuumrated, red-colored NEWTEX call for details. Note that NEWTEX may have multiple pieces per length of tubing. This is due to the material s manufacturing limitations. See details at right. Physical Properties** Hardness, Shore A ±5 35 Tensile Strength (minimum), psi 30 Elongation at Break (minimum), % 7 Brittle Temperature, F -60 Maximum Operating Temperature, F 80 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. 270 00 270 0222 270 0334 270 0446 270 0558 270 0670 270 0782 270 0894 270 6 270 8 270 230 270 342 270 454 270 566 270 678 270 790 270 902 270 204 ID 3/6 3/6 3/6 5/6 5/6 5/6 OD 3/6 5/6 7/6 7/6 7/6 9/6 9/6 Recommended Fittings & Clamps Thermobarb barbed fittings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps Additional Services WALL /32 /32 3/32 3/32 3/32 3/32 3/32 STANDARD LENGTH (FT.) LBS. PER FT..00. 2.00 2. 4.00 6.00 3.25 5.25 6. 3.75 6.25 9.00 5.00 7.00 9. 9.00 2. 7.00 Tubing may have a maximum of five sections, with a minimum section length of 4 feet, in ft. lengths; a maximum of three sections, with a minimum section length of 4 feet, in ft. lengths. Sold by standard coil length only. Add length suffix to part number when ordering. Example: ft. of I.D. x O.D. tubing is part number 270 00-. BOLD indicates the critical dimension for fittings application. Kwik Clamp, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2004 4/04 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Nylotube Nylon- and Nylon-2 Tubing Fluid Transfer Specialists

Nylotube Nylon- & Nylon-2 Tubing Very low moisture absorption:.4% maximum (at 73 F) Will not become brittle or swell because of water Nylon-, semi-rigid grade, natural color made with FDA-approved ingredients for use with food contact surfaces Excellent resistance to flexural fatigue, tube vibration, and movement Lightweight with excellent bend radii and pressure ratings Resists crushing, abrasion, and cracking Standard availability in metric sizes and colors Tightest tolerances available Notes NYLOTUBE is resistant to solvents, alkalies, oils, greases, petroleum products, fungi, and molds. It has generally good resistance to dilute mineral and organic acids, but in-plant tests are suggested. Semi-Rigid grade, black color, is heat and light stabilized. Nylon brittleness is usually caused by cycles of water absorption and depletion. NYLOTUBE is not dependent on moisture for flexibility, so life expectancy is greatly increased with brittleness eliminated. Contact us for information on custom coiled nylon. Physical Properties** NYLON- NYLON-2 SEMI- SEMI- RIGID FLEXIBLE RIGID FLEXIBLE GRADE GRADE GRADE GRADE Hardness, Shore D ±5 72 63 72 63 Tensile Strength, psi 8700 6670 7790 7348 Elongation at Break, % 300 300 300 300 Brittle Temperature, F <-90 <-90 <-90 <-90 Max. Operating Temp., F 22 22 22 22 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Tolerances OD (INCH) TOLERANCE (INCH) - 5/32 +.00, -.003 3/6 - +.00, -.004 +.00, -.005 +.00, -.006 OD (MM) TOLERANCE (MM) 4 +.03, -.08 6-2 +.03, -.0 Recommended Fittings Newloc push-to-connect fittings Additional Services

Nylotube Nylon- Tubing NYLON- Semi-rigid Grade NATURAL 230 0270 23 0266 230 0585 23 058 230 0900 23 0896 230 25 23 2 230 530 230 845 23 84 BLACK 230 024 230 0529 23 0525 230 0844 23 0840 230 474 23 785 ID.095.075.06.086.37.07.90..242.295.225 OD 5/32 5/32 3/6 3/6 5/6 WALL.05.025.025.035.025.040.030.0.035.040.075 STANDARD LENGTH (FT.) 0 0 2 2 2 2 2 2 WORKING PSI AT 70 F 400 0 730 20 530 980 0 0 465 530 80 BURST PSI AT 70 F 200 3000 2200 3360 600 29 0 3000 400 600 35 BEND RADIUS* - - LBS. PER FT. Limited stock availability in black; lead times and minimums may apply call for details. *Use only as a guide. Add length suffix to part number when ordering. Example: ft. of.225 I.D. x O.D., natural color tubing is number 23 84-. BOLD indicates the critical dimension for fittings application..25.35.47.60.58.84.95.39.35.92 3.20 NYLON- Flexible Grade Limited stock availability; lead times and minimums may apply call for details. NATURAL 232 0269 232 0584 232 24 BLACK 232 0528 232 0843 232 58 232 2733 RED ^ 232 0927 232 557 YELLOW ^ 232 094 ID.058.7.70.22 3/6 OD 3/6 5/6 WALL.034.035.040.0 3/32 STD LGTH (FT.) 0 2 2 WORKING PSI AT 70 F 830 600 4 35 4 230 BURST PSI AT 70 F 20 800 3 9 3 700 BEND RADIUS* 5/6 7/8 7 LBS. PER FT..44.74.5.66 2.69.74 GREEN ^ 232 0885 232 55 BLUE ^ 232 0857 232 487 232 802 ORANGE ^ 232 093 232 543 232 858 ID.70 OD STD LGTH (FT.) WORKING PSI AT 70 F 4 4 330 BURST PSI AT 70 F 3 3 0 BEND RADIUS* - LBS. PER FT..5 2.69 3.88 *Use only as a guide. Add length suffix to part number when ordering. Example: 0 ft. of.058 I.D. x O.D., black color tubing is part number 232 023-0. ^Red, Yellow, Green, Blue, and Orange are available in ft. coils only. BOLD indicates the critical dimension for fittings application. WALL.040 NYLON- Metric Sizes, Flexible Grade Limited stock availability; lead times and minimums may apply call for details. NATURAL 235 027 235 090 235 26 235 53 BLACK 235 025 235 0845 235 60 235 475 235 790 RED 235 0929 235 244 YELLOW 235 258 BLUE 235 0859 235 74 235 489 ID (MM) 2.5 4 6 8 9 OD (MM) 4 6 8 0 2 WORKING PSI AT 70 F 480 430 35 265 300 BURST PSI AT 70 F 4 300 9 800 900 BEND RADIUS* (MM) 8 3 33 45 LBS. PER FT..53.06.49 2.00 3.32 *Use only as a guide. All metric size tubing sold by standard coil length only ( ft.). Add length suffix to part number when ordering. Example: ft. of 2.5mm I.D. x 4mm O.D., natural color tubing is part number 235 027-. Metric fittings are available from stock; see page 80 for more information. BOLD indicates the critical dimension for fittings application. WALL (MM).75.5 Turn the page for Nylon-2 items.

Nylotube Nylon-2 Tubing NYLON-2 Semi-rigid Grade NATURAL 233 0580 233 0265 233 20 233 0895 233 840 233 525 233 2470 233 255 233 3 233 2785 233 3730 233 345 NYLON-2 Flexible Grade NATURAL 234 026 234 0576 234 089 234 52 234 836 234 25 234 2466 234 278 BLACK 234 022 234 0527 234 0842 234 472^ 234 787^ 234 202^ 234 247 234 2732 ID.058.7.70 9/32 3/6 NYLON-2 Metric Sizes, Flexible Grade NATURAL 236 0267 236 0897 236 22 236 527 236 842 BLACK 233 053 233 026 233 6 233 0846 233 79 233 476 233 242 233 206 233 305 233 2736 233 368 233 3366 BLACK 236 02 236 084 236 56 236 47 236 786 ID.095.075.06.086.37.07.90..242.82.295.225 RED 236 0295 236 0925 236 240 236 555 236 877 OD 5/32 5/32 3/6 3/6 5/6 5/6 OD 3/6 YELLOW 236 0309 236 0939 236 254 236 569 236 884 Nylotube, Newloc, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2004 7/6/04 DISTRIBUTOR NER WALL.05.025.025.035.025.040.030.0.035.065.040.075 GREEN 236 0253 236 0883 236 98 236 53 236 828 STANDARD LENGTH (FT.) 0 0 2 2 2 2, 2 2 STANDARD LENGTH (FT.) 0 2 2, 0, 0, 0 BLUE 236 0225 236 0855 236 70 236 484 236 800 WORKING PSI AT 70 F 400 0 730 20 530 980 0 0 465 65 530 80 WORKING PSI AT 70 F 830 600 4 4 330 265 300 230 ID (MM) 2.5 4 6 8 9 BURST PSI AT 70 F 200 3000 2200 3360 600 29 0 3000 400 30 600 35 BURST PSI AT 70 F 20 800 3 3 0 800 900 700 OD (MM) 4 6 8 0 2 WALL (MM).75.5 45 James Way Southampton, PA 8966 BEND RADIUS* - 7/8 - *Use only as a guide. Add length suffix to part number when ordering. Example: 2 ft. of.90 I.D. x O.D., natural color tubing is number 233 2470-2. BOLD indicates the critical dimension for fittings application. RED 234 0289 234 0604 234 099 234 549 234 864 YELLOW 234 0625 234 0940 234 570 234 885 GREEN 234 0254 234 0569 234 0884 234 54 234 829 WALL.034.035.040 5/64 3/32 BLUE 234 029 234 0534 234 0849 234 479 234 794 ID.058.7.70 BEND RADIUS* 5/6-2- 4 7 WORKING PSI AT 70 F 480 430 35 265 300 LBS. PER FT..25.35.47.60.58.84.95.39.35 2.20.92 3.20 LBS. PER. FT..44.74.5 2.69 3.88 5.2 7.36.74 BURST PSI AT 70 F 4 300 9 800 900 BEND RADIUS* (MM) 8 3 33 45 LBS. PER. FT..53.06.49 2.00 3.32 *Use only as a guide. All metric size tubing sold by standard coil length only ( ft.). Add length suffix to part number when ordering. Example: ft. of 2.5mm I.D. x 4mm O.D., natural color tubing is part number 236 0267-. Newloc Push-to-Connect fittings are available from stock in metric sizes. BOLD indicates the critical dimension for fittings application. OD 3/6 WORKING PSI AT 70 F 830 600 4 4 330 BURST PSI AT 70 F 20 800 3 3 0 *Use only as a guide. ^Available in ft. coils only. Red, Yellow, Green, and Blue sold by standard coil length only ( ft.). Add length suffix to part number when ordering. Example: ft. of.058 I.D. x O.D., red color tubing is part number 234 0289-. BOLD indicates the critical dimension for fittings application. WALL.034.035.040 BEND RADIUS* 5/6 - LBS. PER. FT..44.74.5 2.69 3.88 Nylon- items are listed on the previous page. 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Suprene Thermoplastic Rubber Tubing Fluid Transfer Specialists

Suprene TPR Tubing Made of first-quality, polypropylene-based, thermoplastic rubber (TPR) Outstanding compression characteristics and toughness for peristaltic pump uses Available in both FDA and industrial grades Natural 80A material is listed by the National Sanitation Foundation (NSF-5)* Made to Good Manufacturing Procedures Notes SUPRENE offers excellent flex fatigue resistance and good tear resistance, making it an ideal choice for peristaltic pump applications. The FDA material is suitable for a variety of clean uses and is autoclavable to ensure cleanliness. Black industrial SUPRENE offers good resistance to U.V., ozone, chemicals, and other fluids. It will also handle applications where oil may splash onto the tubing and is well suited for outdoor use. *Other durometers with an NSF listing are available as a custom item call for details. Physical Properties** Natural Natural Black FDA FDA Ind. 64A 80A 64A Hardness, Shore A @ 77 F, ±5 64 80 64 Tensile Strength @ 77 F, psi 9 600 0 Elongation at Break, % 400 4 400 Tear Strength @ 73 F, pli 40 94 40 Compression Set % @ 73 F after 68 hrs. 22 29 22 22 F after 68 hrs. 34 4 34 Brittle Temperature, F <-76 <-76 <-76 Minimum Recommended Operating Temp., F -60-60 -60 Maximum Recommended Operating Temp., F 275 275 275 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Recommended Fittings & Clamps Thermobarb barbed fittings Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps SUPRENE Natural FDA 64A Durometer 460 0246 460 044 460 0582 460 0638 460 0694 460 0862 460 0974 460 98 460 30 460 646 460 926 ID 3/6 5/6 OD 5/6 7/6 7/8 SUPRENE Natural FDA 80A Durometer 460 604 460 63 460 6406 460 6462 460 6630 460 6742 460 7078 460 7638 ID 5/6 OD 7/6 SUPRENE Black Industrial 64A Durometer 46 0228 46 0396 46 0564 46 0620 46 0676 46 0844 46 0956 46 80 46 292 46 628 46 852 ID 3/6 5/6 OD 5/6 7/6 7/8 Additional Services WALL WALL WALL STANDARD LENGTH (FT.) STANDARD LENGTH (FT.) STANDARD LENGTH (FT.) LBS. PER FT..55 2.06.5 6.9 3.09 3.6 8.26 4.65 0.32 2.39 4.45 LBS. PER FT..55.5 6.9 3.09 3.6 8.26 0.32 4.45 LBS. PER FT..55 2.06.5 6.9 3.09 3.6 8.26 4.65 0.32 2.39 4.45 Add length suffix to part number when ordering. Example: ft. of I.D. x O.D. tubing is part number 46 0228-. BOLD indicates the critical dimension for fittings application. Suprene, Kwik Clamp, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2005 6/05 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Pureloc PFA Compression Fittings Fluid Transfer Specialists

Pureloc PFA Compression Fittings Made from chemically inert PFA fluoropolymer No flow restrictions Easy to disconnect and reuse Excellent lock and seal ability Precision molded to exacting tolerances Installation Instructions: B C D A E. Cut tubing (A) cleanly at 90. 2. Push tubing through small end of nut (B), gripper (C), ferrule (D), and seat the tubing end into the fitting body as far as it will go (E). 3. Thread the nut onto the body and finger tighten. To complete the installation, tighten the nut at least one additional turn. Notes Made from virgin, high purity PFA fluoropolymer, PURELOC is ideal for ultra-pure fluid applications where contamination-free systems are used. This includes semiconductor manufacturing, food and beverage processing, medical and biomedical, laboratory, chromatography equipment, and the chemical industries. The gripper coupled with the precisionmade ferrule provides excellent leak-proof connections and prevents tubing blow-out. Pressure (psig) 2 200,, & Male Adapter 532 0644 532 0672 532 0700 532 0728 532 0756 532 0784 532 082 532 0833 532 0868 532 0896 532 0924 532 0952 532 0980 532 8 532 036 532 064 TUBE OD x NPT x x x x x x x x x x x x x x x x Female Adapter 532 0028 532 0056 532 0084 532 02 532 040 532 068 532 0224 532 0252 532 0280 532 0308 532 0336 532 0364 532 0392 532 0420 532 0448 TUBE OD x FNPT x x x x x x x x x x x x x x x 0 200 2 300 3 Fluid Temperature ( F) The values above are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Female 90 Elbow 532 2604 532 2660 532 2688 532 276 532 2744 532 2772 532 2828 TUBE OD x FNPT x x x x x x x Male 90 Elbow 532 3080 532 308 532 392 532 3220 532 3248 532 3276 532 3304 532 3332 532 3360 532 3388 532 346 532 3444 TUBE OD x NPT x x x x x x x x x x x x

Pureloc PFA Compression Fittings Union 90 Elbow 532 362 532 3640 532 3696 532 3724 532 3752 TUBE OD Reducing 90 Elbow 532 3948 532 4004 TUBE OD x TUBE OD x x Nut Replacement Kit Contains one nut, one gripper, and one ferrule 532 6860 532 7056 532 7252 532 7448 532 7644 TUBE OD Male Branch Tee 532 4697 532 4732 532 4760 532 4788 532 486 532 4844 532 4872 532 4900 532 4928 532 4956 TUBE OD x NPT x x x x x x x x x x Male Run Tee 532 5656 532 5684 532 5796 532 5880 532 5936 532 5964 TUBE OD x NPT x x x x x x Union Tee 532 632 532 660 532 688 532 626 532 6244 TUBE OD Union Connector TUBE OD Reducing Union Connector TUBE OD x TUBE OD Bulkhead Union TUBE OD 532 484 532 52 532 540 532 568 532 596 532 764 532 820 532 848 532 876 532 904 x x x x x 532 2072 532 2 532 228 532 256 532 284

Tubing Options Fluoropolymer Tubing PTFE, FEP, & PFA Formulations Chemically inert; low permeability Manufactured from FDA-sanctioned ingredients for use with food contact surfaces Widest service temperature of any plastic tubing (-275 F to 0 F) Excellent electrical and weathering properties; non-flammable Ultra-high-purity grades available for the semiconductor industry Coiltef Coiled FEP Tubing Made of chemically inert clear FEP Manufactured from FDA-sanctioned ingredients Heat set into a retractable coil; excellent recoil memory Offers all the chemical and electrical insulation properties of standard FEP tubing Allows flexibility to otherwise semi-rigid fluoropolymer tubing Prolite An Alternative to Fluoropolymer Tubing Made of NSF-6 listed, virgin Polypropylene copolymer conforming to FDA requirements for food contact surfaces Extremely lightweight, thermoformable, and weldable Very low moisture absorption Meets UL94 HB burn rating Excellent chemical resistance Ask for our latest catalog Inside you ll find details on all of NewAge Industries tubing and hose products, plus Chemical Resistance Charts, Temperature and Measurement Conversions, and a Glossary. The custom section highlights thermal tube bonding, heat-formed shapes, coiling, and other fabrication services. Plastic and metal fittings and clamps are also included. Contact your NewAge Industries sales representative or local distributor to request a free copy. Pureloc, Coiltef, Prolite, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2006 5/24/06 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Thermobarb Brass Brass Barbed Fittings Fluid Transfer Specialists

Thermobarb Brass Brass Barbed Fittings Formed of forged and/or machined brass Tapered pipe threads are made to Dryseal USA specifications An industrial standard use in all general purpose applications May be used in potable water systems Notes General purpose brass barbed fittings designed for maximum durability Working temperature**: -40 F to 80 F Working pressure**: psi at 60 F with appropriate clamps **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Clamps must be used in higher pressure applications; testing recommended. Recommended Clamps Male Adapter 600 049 600 05 600 0603 600 067 600 0659 600 0673 600 0687 600 070 600 0743 600 0757 600 077 600 083 600 0827 600 084 600 0855 600 0932 600 0939 600 0946 600 0960 600 023 600 030 600 044 600 079 600 093 600 63 600 77 HOSE ID x NPTF x x 3/6 x 3/6 x x x x x 5/6 x 5/6 x 5/6 x x x x x x x x x x x x x x x x Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps Swivel Female Adapter Ball End HOSE ID x NPSM 600 2773 600 2822 600 28 600 2857 600 2885 600 2892 600 2955 x 5/6 x x x x x x All items sold in increments of 0 pieces.

Thermobarb Brass Brass Barbed Fittings Female Adapter HOSE ID x NPTF Male 45 Elbow HOSE ID x NPTF 600 238 600 2395 600 246 600 2423 600 2437 600 2458 600 2472 600 2493 600 20 600 27 600 254 600 2528 600 2535 600 2542 600 2605 x 3/6 x x x x 5/6 x 5/6 x x x x x x x x x 600 464 600 476 600 4775 600 4789 600 4873 600 4880 600 497 x x x x x x x Male 90 Elbow HOSE ID x NPTF Swivel Female Flare Adapter HOSE ID x FEMFL 600 323 600 337 600 3207 600 324 600 3242 x x x x x 600 3977 600 399 600 406 600 4075 600 4089 600 424 600 438 600 452 600 4243 600 42 600 4334 600 434 x x 5/6 x 5/6 x 5/6 x x x x x x x x Nipple Adapter NPSM x MNPTF 600 6763 600 6770 600 6784 600 679 600 689 x x x x x Converts a Swivel Female Adapter to a Swivel Male Adapter Barbed Tee 600 6483 HOSE ID x HOSE ID x HOSE ID x x Connector 600 387 600 394 600 40 600 408 600 422 HOSE ID 3/6 5/6 Male Tee 600 604 HOSE ID x NPTF x All items sold in increments of 0 pieces.

Tubing & Hose Options PVC A Wide Range of Styles Chemical and corrosion resistance with rubber-like flexibility Choose from various construction options: braid reinforced, unreinforced, rigid pipe, wire reinforced, push-on style, spiral reinforced Applications include general industrial, food, pharmaceutical and medical, protective coverings, insulation sleeving, equipment components, many more Silicone Platinum or Peroxide Cured, Medical Grades Braid-Reinforced hose or unreinforced tubing Flexible, resilient, odorless Ingredients meet USP Class VI, FDA, and NSF-5 requirements Handles temperatures ranging from - F to 0 F Suction hose offers full vacuum rating Polyurethane Braid-Reinforced, Unreinforced, Colors Select from reinforced hose, unreinforced tubing, or a special formulation for pneumatic applications Naturally flexible no plasticizers to migrate out and cause flow contamination Resistant to weathering, U.V., moisture, chemicals, petroleum products Well-suited for applications involving repeated flexing, vibration, abrasion situations, radiation exposure, impact Ask for our latest catalog Inside you ll find details on all of NewAge Industries tubing and hose products, plus Chemical Resistance Charts, Temperature and Measurement Conversions, and a Glossary. The custom section highlights thermal tube bonding, heat-formed shapes, coiling, and other fabrication services. Plastic and metal fittings and clamps are also included. Contact your NewAge Industries sales representative or local distributor to request a free copy. Kwik Clamp, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2008 5/08 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Thermobarb Plastic Plastic Barbed Fittings & Hose Nipples Fluid Transfer Specialists

Thermobarb Plastic Plastic Barbed Fittings & Hose Nipples Precision molded in nylon-6, high density polyethylene, PVDF, polypropylene, glass-fiber reinforced nylon, or glass-fiber reinforced polypropylene Lightweight, compact, easy to install and disconnect High impact strength Excellent chemical resistance Notes NATURAL NYLON Formulated to resist physical stress and abrasion Autoclavable Material: NSF-5 and NSF-6 nylon type 6; ingredients meet FDA standards Temperature Range**: -40 F to 200 F Working Pressure**: psi maximum with appropriate clamps Limited styles in - and - sizes are available; call for details BLACK POLYETHYLENE (PE) Formulated for chemical compatibility and high impact resistance at lower temperatures Material: NSF-6, high molecular weight linear polyethylene Temperature Range**: -65 F to 90 F Working Pressure**: psi maximum with appropriate clamps NATURAL PVDF Formulated to resist creep and fatigue under mechanical stress and load Offers excellent resistance to abrasion and UV Autoclavable Material: semi-crystalline, low molecular weight, vinylidene fluoride polymer with NSF-6 and FDA approved ingredients Temperature Range**: -80 F to 226 F Working Pressure**: 2 psi maximum with appropriate clamps NATURAL POLYPROPYLENE (NATURAL PP) Formulated for excellent chemical and solvent resistance Autoclavable Material: FDA-approved, high impact copolymer polypropylene Temperature Range**: 0 F to 220 F Working Pressure**: psi maximum with appropriate clamps new BLACK POLYPROPYLENE (BLACK PP) Formulated for excellent chemical and solvent resistance Autoclavable Material: FDA-approved, high impact copolymer polypropylene Temperature Range**: 0 F to 220 F Working Pressure**: psi maximum with appropriate clamps See page 6 for other POLYPROPYLENE Thermobarb fittings in styles such as Y and 4-way connectors. **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Clamps must be used in higher pressure applications; testing recommended. Recommended Clamps Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps 2

Thermobarb Plastic Plastic Barbed Fittings & Hose Nipples Note that sizes are listed first due to the variety of materials offered Male Adapter HOSE ID x NPT 5/32 x 3/6 x 3/6 x x x x x x 5/6 x 5/6 x 5/6 x x x x x x x x x x x x x x x x x x x NYLON 0 0030 0 070 0 0065 0 0205 0 0345 0 0555* 0 0765* 0 0* 0 0240 0 0380 0 035 0 0275 0 045 0 0590 0 0800 0 030 0 04 0 0625 0 0835 0 0485 0 0660 0 0870 0 0695 0 0905 0 0975* 0 0730 0 0940 0 00 PE 0033 073 0068 0208 0348 0558 0733* 003 0243 0383* 038 0278 048 0593 0768 033 0453 0628 0803 0488 0663 0838 0698 0873 PVDF* 7 0044 7 0065 7 0086 7 028 7 049 7 070 7 09 7 0233 7 0254 7 0296 7 037 7 0338 7 0359 7 0387 7 0408 7 0429 7 04 7 047 7 0492 7 053 7 054 7 0562 7 0583 7 0604 7 0625 7 0646 7 0667 NATURAL PP 2 2983 2 3004 2 3025 2 3067 2 3088 2 309 2 330 2 372 2 393 2 3235 2 3256 2 3277 2 3298 2 3326 2 3347 2 3368 2 3389 2 340 2 343 2 3452 2 3480 2 3 2 3522 2 3543 2 3564 2 3585 2 3606 BLACK PP 8 00 8 03 8 052 8 094 8 025 8 0236 8 0257 8 0299 8 0320 8 0362 8 0383 8 0404 8 0425 8 0453 8 0474 8 0495 8 056 8 0537 8 0558 8 0579 8 0607 8 0628 8 0649 8 0670 8 069 8 072 8 0733 Connector HOSE ID 3/6 5/6 NYLON 0 85^ 0 220 0 255 0 290 0 325 0 360 0 395* 0 430 0 465* PE 048^ 083 8 53 88 223 258* 293 328* PVDF* 7 0856 7 0870 7 0884 7 0898 7 092 7 0926 7 0940 7 0954 7 0968 NATURAL PP 2 3795 2 3809 2 3823 2 3837 2 385 2 3865 2 3879 2 3893 2 3907 BLACK PP 8 0922 8 0936 8 09 8 0964 8 0978 8 0992 8 6 8 020 8 034 Female Adapter HOSE ID x FNPT NYLON 3/6 x 3/6 x x x x x x x x x x x x x 0 586^ 0 5868^ 0 5896 0 5903 0 5966 0 5973 0 5980 0 5987 0 6022 0 6029 0 6036 0 6064 0 6099 0 606 *Limited stock availability; lead times and minimums may apply call for details. ^Available in single-barb style only actual product differs from illustration. All items on this page sold in increments of pieces. 3

Thermobarb Plastic Plastic Barbed Fittings & Hose Nipples Note that sizes are listed first due to the variety of materials offered Male 90 Elbow HOSE ID x NPT 3/6 x 3/6 x x x x x x 5/6 x 5/6 x x x x x x x x x x x x x x x x x x NYLON 0 325^ 0 3355^ 0 32 0 3390 0 3530 0 3670* 0 3880* 0 3285 0 3425 0 3320 0 3460 0 3565 0 3705 0 395 0 3495 0 3600 0 3740 0 39 0 3635* 0 3775 0 3985 0 380 0 4020 0 3845 0 4055 0 4090 PE 3008 348* ^ 3043 383 3323 3498* 3673* 3078 328 33 3253 3393 3533 3708 3288 3428 3568 3743 3463 3603 3778* 3638 383 PVDF* 7 247 7 243 7 2473 7 2487 7 2 7 2564 7 2578 7 2627 7 264 7 2655 7 2669 7 2683 7 2732 7 2746 7 2760 7 2774 7 2809 7 2823 7 2886 7 2900 7 2977 NATURAL PP 2 5356 2 5370 2 542 2 5426 2 5440 2 53 2 557 2 5566 2 5580 2 5594 2 5608 2 5622 2 567 2 5685 2 5699 2 573 2 5748 2 5762 2 5825 2 5839 2 596 BLACK PP 8 2483 8 2497 8 2539 8 2553 8 2567 8 2630 8 2644 8 2693 8 2707 8 272 8 2735 8 2749 8 2798 8 282 8 2826 8 2840 8 2875 8 2889 8 2952 8 2966 8 3043 Barbed 90 Elbow HOSE ID x HOSE ID x x x x x x x x NYLON 0 2795 0 2830 0 2865 0 2900 0 2935 0 2970 0 3005 0 3040 PE 2623 2658 2693 2728 2763 2798 2833 PVDF* 7 202 7 237 7 272 7 286 7 2200 7 2235 7 2284 7 2333 NATURAL PP 2 4 2 76 2 5 2 525 2 539 2 574 2 5223 2 5272 BLACK PP 8 268 8 2203 8 2238 8 2252 8 2266 8 230 8 23 8 2399 4 Female 90 Elbow HOSE ID x FNPT x x x 5/6 x 5/6 x x x x x x x x NYLON 0 5567 0 5574 0 558 0 5602 0 5609 0 5637 0 5644 0 565 0 5658 0 5686 0 5693 0 5700 *Limited stock availability; lead times and minimums may apply call for details. ^Available in single-barb style only actual product differs from illustration. All items on this page sold in increments of pieces.

Thermobarb Plastic Plastic Barbed Fittings & Hose Nipples Note that sizes are listed first due to the variety of materials offered Reducer Connector HOSE ID x HOSE ID x x 3/6 x x x x x x NYLON 0 640 0 675 0 70 0 745 0 780 0 85 0 8* PE 3 538 573 608 643 678 73 PVDF* 7 080 7 094 7 08 7 22 7 7 7 92 7 248 7 269 NATURAL PP 2 409 2 4033 2 4047 2 406 2 40 2 43 2 487 BLACK PP 8 46 8 60 8 74 8 88 8 237 8 258 8 34 Male Tee HOSE ID x NPT 3/6 x 3/6 x x x x x x x x x x x x x NYLON 0 4265 0 4335 0 4300 0 4370 0 4475 0 4405 0 4 0 4580* 0 4440 0 4545 0 465 0 46* 0 4685 0 4720 PE 3988* 4058* 4023* 4093* 498* 428* 4233* 4303* 463* 4268* 4338* PVDF* 7 3089 7 303 7 338 7 352 7 366 7 325 7 3229 7 3306 7 3320 NATURAL PP 2 6028 2 6042 2 6077 2 609 2 605 2 654 2 668 2 6245 2 6259 BLACK PP 8 355 8 369 8 3204 8 328 8 3232 8 328 8 3295 8 3372 8 3386 Barbed Tee HOSE ID x HOSE ID x HOSE ID x x x 5/32 x 5/32 5/32 x 5/32 x 5/32 3/6 x 3/6 x 3/6 3/6 x x x x x 5/6 x 5/6 x x x x 5/6 x 5/6 x 5/6 5/6 x x x x x x x x x x x x x x x x NYLON 0 4895^ 0 4930* 0 4965* ^ 0 00^ 0 35* 0 70 0 540 0 575 0 520 0 5245 0 5280* 0 535 0 53 0 5385 0 5420 0 5455 PE 453^ 4548* 4583^ 468^ 4653 4688 4723* 4758 4793 4828 4863* 4898 4933* 4968 03 38 73 PVDF* 7 3544 7 3607 7 3656 7 3677 7 3726 7 3754 7 3768 7 387 7 3866 7 3887 7 3936 7 3957 7 4006 7 4055 7 404 NATURAL PP 2 6483 2 6546 2 6595 2 666 2 6665 2 6693 2 6707 2 6756 2 6805 2 6826 2 6875 2 6896 2 6945 2 6994 2 7043 BLACK PP 8 360 8 3673 8 3722 8 3743 8 3792 8 3820 8 3834 8 3883 8 3932 8 3953 8 4002 8 4023 8 4072 8 42 8 470 *Limited stock availability; lead times and minimums may apply call for details. ^Available in single-barb style only actual product differs from illustration. All items on this page sold in increments of pieces. 5

Thermobarb Plastic Plastic Barbed Fittings & Hose Nipples FDA-APPROVED POLYPROPYLENE (FDA PP) Excellent temperature and chemical resistance Autoclavable Widely used in industry and laboratories Temperature range**: 32 F to 22 F Working pressure**: 2.75 psi maximum at 70 F with appropriate clamps **Values listed at left are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Clamps must be used in higher pressure applications; testing recommended. Y Connector 2 0596 2 063 2 0666 2 070 2 0736 2 077 2 0806 HOSE ID 3/6 7/6 9/6 Connector 2 006 2 04 2 076 2 02 2 0246 2 028 HOSE ID 7/32 3/6 5/6 7/6 7/6 9/6 4-Way Connector 2 0946 2 098 2 06 2 05 2 086 2 2 Barbed 90 Elbow 2 68 2 76 2 75 2 786 2 82 2 856 2 89 Barbed Tee 2 203 2 2066 2 20 2 236 2 27 2 2206 2 224 HOSE ID 3/6 7/6 HOSE ID 3/6 7/6 9/6 HOSE ID 3/6 7/6 9/6 Reducer Connector 2 042 2 0456 2 049 HOSE ID 5/6 and 7/6 5/6 and 7/6 5/6 7/6 and 7/6 Quick Disconnect 2 366* 2 40* 2 436* 2 47* 2 6* HOSE ID 7/32 3/6 5/6 7/6 7/6 9/6 2 54* This part is made from FDA-approved polyethylene and is not autoclavable. Working pressure is 2 psi maximum at 70 F. Maximum safe working temperature is 22 F; 40 F intermittently. *Limited stock availability; lead times and minimums may apply call for details. All items on this page sold in increments of 0 pieces. 6

Thermobarb Plastic Plastic Barbed Fittings & Hose Nipples Pinch Clamp Chemical resistant Autoclavable One piece construction for easy operation; no sharp edges to damage tubing Accurate flow rate Check Valve Body made of polypropylene Internal gasket made of Dutral synthetic rubber Prevents back flow of liquid when pressure is stopped POLYPROPYLENE POLYESTER 2 252 2 2556 2 259 TUBING OD Fits up to Fits up to Fits up to 2 245 2 2465 TUBING ID 7/6 Reinforced Nipples Made from glass fiber-reinforced nylon (yellow in color) or glass fiber-reinforced polypropylene (black in color) High impact strength yet much lighter in weight than metal Resistant to most hydrocarbons, solvents, mild acids, and agricultural chemicals Made to MIL-C-27487 dimensions; fully interchanged with other materials made to the same standard Electrically non-conductive Glass Fiber Reinforced Nylon Temperature Range**: -30 F to 200 F Working Pressure**: " thru " 75 psi -" thru 2" psi 3" psi 4" psi Glass Fiber Reinforced Polypropylene Temperature Range**: 0 F to 80 F Working Pressure**: " thru " 25 psi -" thru 2" psi 3" 75 psi 4" psi Hose Nipples Hose x MNPT NYLON 560 3297 560 3325 560 3353 560 338 560 3409 560 3437 560 3493 560 352 POLYPROPYLENE 56 3832 56 3860 56 3888 56 396 56 3944 56 3972 56 4028 56 4056 SIZE - - 2 3 4 **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Clamps must be used in higher pressure applications; testing recommended. All items on this page sold in increments of 0 pieces. 7

Tubing & Hose Options PVC A Wide Range of Styles Chemical and corrosion resistance with rubber-like flexibility Choose from various construction options: braid reinforced, unreinforced, rigid pipe, wire reinforced, push-on style, spiral reinforced Applications include general industrial, food, pharmaceutical and medical, protective coverings, insulation sleeving, equipment components, many more Silicone Platinum or Peroxide Cured, Medical Grades Braid-Reinforced hose or unreinforced tubing Flexible, resilient, odorless Ingredients meet USP Class VI, FDA, and NSF-5 requirements Handles temperatures ranging from - F to 0 F Suction hose offers full vacuum rating Polyurethane Braid-Reinforced, Unreinforced, Colors Select from reinforced hose, unreinforced tubing, or a special formulation for pneumatic applications Naturally flexible no plasticizers to migrate out and cause flow contamination Resistant to weathering, U.V., moisture, chemicals, petroleum products Well-suited for applications involving repeated flexing, vibration, abrasion situations, radiation exposure, impact Ask for our latest catalog Inside you ll find details on all of NewAge Industries tubing and hose products, plus Chemical Resistance Charts, Temperature and Measurement Conversions, and a Glossary. The custom section highlights thermal tube bonding, heat-formed shapes, coiling, and other fabrication services. Plastic and metal fittings and clamps are also included. Contact your NewAge Industries sales representative or local distributor to request a free copy. Kwik Clamp, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2007 5/22/07 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Newloc Acetal Plastic Push-to-Connect Fittings Fluid Transfer Specialists

Newloc Acetal Plastic Push-To-Connect Fittings Extremely easy to install no tools necessary Listed by the National Sanitation Foundation (NSF 5 and NSF 6) Instant leak-proof connections Made from tough, lightweight, FDA-sanctioned materials No flow restrictions Easy to disconnect and reuse Available in either Fractional or Metric sizes Optional collet cover to prevent accidental disconnection and to deter tampering available in colors for coding purposes Genuine John Guest brand fittings Installation Instructions:. Cut tubing cleanly at 90 angle and push into collet 2. Installation complete and secure 3.To disconnect push in collet and pull tubing 4. Optional collet cover snaps over collet before or after installation 2 Notes Construction materials: Body: Acetal copolymer (fractions are gray; metrics are black) O - Ring: FDA-grade nitrile rubber Collet: Acetal copolymer with stainless steel teeth Collet cover: Acetal copolymer Working pressure: Up to 230 psi (air and potable liquids)** Vacuum rating: Full (29.9 in./hg)** Working temperatures: air: -4 F to 58 F** potable liquids: 33 F to 58 F** **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Use NEWLOC ACETAL fittings with all types of semi-rigid to rigid plastic tubing including nylon and polyethylene. They can also be used in limited soft tubing sizes using tube supports testing is recommended. Typical applications include systems for pneumatic control, food and beverage, chemicals, and potable water. NEWLOC ACETAL s threads are self-sealing do not use sealants such as fluoropolymer tape. If tube and fitting are disconnected, it may be necessary to re-cut the end of the tubing to ensure perfect sealing when reattached. NSF listed as trade designation JG Male Adapter 520 0979 520 7 520 035 520 063 520 09 520 098 520 9 520 47 520 75 520 203 520 23 520 259 520 287 520 35 520 343 Fraction TUBE OD x NPT 5/32 x 5/32 x 3/6 x x x x 5/6 x 5/6 x 5/6 x x x x x x x Metric (MM) 52 0723 52 075* 52 0779 52 0807* 52 0835 52 0863 52 089 52 099 52 0947 52 0975 52 3 52 03 52 059 52 087 TUBE OD x BSPT 4 x 4 x 5 x 5 x 6 x 6 x 8 x 8 x 8 x 0 x 0 x 0 x 2 x 2 x *Limited stock availability; lead times and minimums may apply call for details. All items sold in increments of 0 pieces.

Newloc Acetal Plastic Push-To-Connect Fittings Union Tee Fraction TUBE OD Metric (MM) TUBE OD Union Y TUBE OD 520 4675 520 4703 520 473 520 4759 520 4787 520 485 5/32 3/6 5/6 52 4335 52 4363 52 439 52 449 52 4447 52 4475 4 5 6 8 0 2 520 4479 520 47 5/6 Reducing Union Tee TUBE OD BRANCHES x TUBE OD STEM Union Connector 520 4955 x Fraction Metric (MM) TUBE OD TUBE OD 520 89 520 847 520 875 520 903 520 93 520 959 5/32 3/6 5/6 52 423 52 45* 52 479 52 7 52 535 52 563 4 5 6 8 0 2 Union 90 Elbow Fraction TUBE OD Metric (MM) TUBE OD 520 335 520 363 520 39 520 329 520 3247 520 3275 5/32 3/6 5/6 52 2767 52 2823 52 285 52 2879 52 2907 4 6 8 0 2 Check Valve 3-Way Union Connector TUBE OD BRANCHES x TUBE OD STEM 520 200 TUBE OD 520 4633 x Swivel Male Branch Tee and Swivel Male Run Tee fittings may be assembled from components available call for details. Tube Support 520 5459 520 5487* 520 555 TUBE ID x TUBE OD x 5/6 5/6 x x *Limited stock availability; lead times and minimums may apply call for details. All items sold in increments of 0 pieces. 3

Newloc Acetal Plastic Push-To-Connect Fittings Stem 90 Elbow Fraction 520 2799 520 2827* 520 2855 520 2883* 520 2897* 520 2904 520 29* 520 2939 520 2967 STEM OD x TUBE OD 5/32 x 5/32 3/6 x 3/6 x 5/6 x 5/6 x 3/6 x x 5/6 x x 52 243* 52 2459* 52 2487* 52 255* 52 2543* 52 257* Metric (MM) STEM OD x TUBE OD 4 x 4 5 x 5 6 x 6 8 x 8 0 x 0 2 x 2 Bulkhead Union Fraction 520 249 520 259* 520 2547 520 2575 520 2603 520 263 TUBE OD 5/32 3/6 5/6 52 223* 52 25* 52 279* 52 2207* 52 2235* 52 2263* Reducing Bulkhead Union 520 2764 Metric (MM) TUBE OD x TUBE OD x TUBE OD 4 5 6 8 0 2 Swivel Male 90 Elbow Fraction 520 3779 520 3807 520 3835 520 3863 520 389 520 399 520 3947 520 3975 520 4003 520 403 520 4059 520 4087 TUBE OD x NPT 5/32 x 5/32 x 3/6 x x x 5/6 x 5/6 x 5/6 x x x x x Metric (MM) 52 3467 52 3495 52 355* 52 3579 52 3607 52 3635 52 3663 52 369 52 379 52 3747 52 3775 52 3803 52 383 TUBE OD x BSPT 4 x 4 x 5 x 6 x 6 x 8 x 8 x 8 x 0 x 0 x 0 x 2 x 2 x 4-Way Union Connector 520 4563 TUBE OD Male Stem Adapter Fraction 520 0027 520 0055 520 0083 520 0 520 039 520 067 520 095 520 0223 520 025 520 0279 520 0307 520 0335 STEM OD x NPT 5/32 x 5/32 x 3/6 x x x 5/6 x 5/6 x 5/6 x x x x x Metric (MM) 52 0023 52 005 52 007* 52 035 52 063 52 09 52 029 52 0247 52 0275 52 0303 52 033* 52 0359* 52 0387* STEM OD x BSPT 4 x 4 x 5 x 6 x 6 x 8 x 8 x 8 x 0 x 0 x 0 x 2 x 2 x Reducing Union Connector Fraction 520 227 520 255 520 283 520 22 520 2239 520 2267 520 2295 520 236 520 2323 TUBE OD x TUBE OD x 3/6 5/6 x 5/32 5/6 x 3/6 5/6 x x 3/6 x x 5/6 x 5/6 x Metric (MM) 52 759* 52 787* 52 85* 52 843* 52 87* 52 899* 52 927* 52 955* TUBE OD x TUBE OD 6 x 4 8 x 4 8 x 6 0 x 4 0 x 6 0 x 8 2 x 8 2 x 0 4 *Limited stock availability; lead times and minimums may apply call for details. All items sold in increments of 0 pieces.

Newloc Acetal Plastic Push-To-Connect Fittings Tube to Hose Barb Fraction 520 03 520 053 520 0559 520 0587 520 065 520 0643 520 067 520 0699 520 0727 520 0755 520 0762 520 0783 520 08 STEM OD x HOSE ID x 3/6 x x 5/6 5/6 x 3/6 5/6 x 5/6 x 5/6 5/6 x x x 5/6 x x x x Metric (MM) 52 0555* 52 0583* 52 06* STEM OD x HOSE ID 6 x 4 8 x 6 0 x 8 Male 90 Elbow 520 333 520 3338 520 3345 520 3387 TUBE OD x NPT x x x x Plug Fraction STEM OD Metric (MM) STEM OD End Stop 520 585 520 5865 TUBE OD 520 5683* 520 57 520 5739 520 5767 520 5795 520 5823 5/32 3/6 5/6 52 5203* 52 523* 52 5259* 52 5287* 52 535* 52 5343* 4 5 6 8 0 2 Female Adapter Fraction 520 0839 520 0860 520 088 520 0902 TUBE OD x THREAD x FE FL* x FE FL* x FNPT x FNPT 52 0639* 52 0667* Metric (MM) TUBE OD x THREAD 4 x FE BSP 8 x FE BSP Flow Bend Clip 520 7223 520 7230 TUBE OD 5/6 Collet Covers can prevent accidental disconnection and deter tampering on Newloc Acetal fittings (they will not fit Newloc Brass fittings). Collet Covers are available through special order in black, gray, red, blue, and yellow colors in the sizes listed at right call for more information. TUBE OD (MM) 5/32 3/6 5 6 5/6 8 2 Collet Retainer Clip 520 739 520 753 TUBE OD *Limited stock availability; lead times and minimums may apply call for details. All items sold in increments of 0 pieces. 5

Tubing Options Superthane Pneumatic Colored Polyurethane Tubing Made from hydrolysis resistant, 85A durometer Ether polyurethane Stocked in 0 colors for easy multiple line identification Naturally flexible for close-in bending contains no plasticizers which could migrate and cause tube hardening or flow contamination Resistant to weathering, kinking, tearing, abrasion, impact, and radiation exposure Nylotube Nylon- & Nylon-2 Tubing Excellent resistance to flexural fatigue, tube vibration, and movement Lightweight with excellent bend radii and pressure ratings Resists crushing, abrasion, and cracking Standard availability in metric sizes and colors Very low moisture absorption:.4% maximum (at 73 F) Zelite Linear Low Density Polyethylene Tubing Made from non-toxic ingredients conforming to FDA standards Does not impart a taste or odor to critical streams Flexible, lightweight, durable Offers enhanced resistance to stress cracking Chemically inert; forms a good barrier to gases, vapors, and moisture Ask for our latest catalog Inside you ll find details on all of NewAge Industries tubing and hose products, plus Chemical Resistance Charts, Temperature and Measurement Conversions, and a Glossary. The custom section highlights thermal tube bonding, heat-formed shapes, coiling, and other fabrication services. Plastic and metal fittings and clamps are also included. Contact your NewAge Industries sales representative or local distributor to request a free copy. Newloc, Superthane, Nylotube, Zelite, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2004 7/5/04 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

SafeAir Two-Stage Safety Air Coupler Fluid Transfer Specialists

SafeAir Two-Stage Safety Air Coupler Unique two-stage design eliminates pop-off injury during hose disconnection Simple one step connection Durable, reliable, and lightweight made of steel and nylon Tested to more than 2,000 cycles; rated to 232 psi Mates with standard industrial interchange plugs that comply with ISO 6B and MIL 409C COUPLERS Hose Barb 630 0042 630 0077 630 02 630 075 630 089 HOSE ID x SOCKET x 5/6 x x x x Notes SafeAir s two step disconnection helps prevent danger and injuries from whipping air hoses. Step one releases air pressure, while step two disconnects the coupling. SafeAir will not disconnect without this manual vent release step. Made of steel and nylon, SafeAir is durable and attractive. Its shape makes it easy to see and grip. SafeAir is the first coupler to meet ISO Standard 444. Couplings are covered by one or more of the following U.S. patents: 5630 570 and 5634 629. Safety ISO 444 S t a n d a r d **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Clamps must be used in higher pressure applications; testing recommended. Recommended Clamps Oetiker ear type clamps Kwik Clamp nylon double bond hose clamps Worm gear clamps SafeAir, Kwik Clamp, Thermobarb, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. Oetiker reg. TM Oetiker, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge. This warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability. The data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2004 4/04 DISTRIBUTOR NER Pre-coated with fluoropolymer thread sealant Limited stock availability call for details. 45 James Way Southampton, PA 8966 Female Thread 630 0287 630 0357 630 0420 630 0434 Male Thread 630 0532 630 0602 630 06 630 0630 630 0644 FNPT x SOCKET x x x x MNPT x SOCKET x x 5/6 x x x INDUSTRIAL INTERCHANGE PLUGS* Meets ISO 6B Standard *Treated steel for enhanced durability Pre-coated with fluoropolymer thread sealant Hose Stem 630 477 630 59 630 547 630 554 630 56 630 624 Female Thread 630 722 630 792 630 799 630 806 Male Thread 630 967 630 2037 630 2044 630 205 HOSE ID x INDUSTRIAL INTERCHANGE x 5/6 x x 5/6 x x x FNPT x INDUSTRIAL INTERCHANGE x x x x MNPT x INDUSTRIAL INTERCHANGE x x x x 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Cam Operated Couplings Plastic Cam-Operated Couplings Fluid Transfer Specialists

Cam Operated Couplings Plastic Cam Operated Couplings NYLON (Glass Fiber Reinforced) High impact strength at much lighter weight than metal counterparts Corrosion resistant Will not easily cross thread or seize on mating threads Electrically non-conductive Resistant to most hydrocarbons, solvents, mild acids, and agricultural chemicals Made to MIL-C-27487 dimensions fully interchangeable with other materials made to the same standards POLYPROPYLENE (Glass Fiber Reinforced) Similar properties to nylon (above) yet more resistant to most acids than nylon couplings Made to MIL-C-27487 dimensions new new PVDF Highly acid resistant Withstands higher temperatures than other coupling materials Non-flammable and self-extinguishing UV stable Made from FDA ingredients May be sterilized using autoclave, ethylene oxide, or gamma radiation Made to MIL-C-27487 dimensions POLYPROPYLENE (Food Grade) Excellent resistance to most acids, alkalis, salts, and alcohols Resists animal, vegetable, and mineral oils May be sterilized with gamma radiation up to 6 mega rads (discoloration may occur) Made to MIL-C-27487 dimensions Notes NYLON Material: Glass-fiber reinforced nylon yellow in color Standard Gasket: EPDM Handle: 304L Stainless Steel Pin: 302 Stainless Steel Temperature Range: -30 F to 200 F** Working Pressure**: " thru " 75 psi -" thru 2" psi 3" psi 4" psi POLYPROPYLENE (PP) Material: Glass-fiber reinforced polypropylene black in color Standard Gasket: EPDM Handle: 304L Stainless Steel Pin: 302 Stainless Steel Temperature Range: 0 F to 80 F** Working Pressure**: " thru " 25 psi -" thru 2" psi 3" 75 psi FDA PVDF CAM OPERATED COUPLINGS are available with BSPT (metric) threads through minimum order. Material: FDA grade PVDF natural translucent in color Standard Gasket: EPDM Handle: 304L Stainless Steel Pin: 302 Stainless Steel Temperature Range: -20 F to 300 F** Working Pressure**: " thru " 25 psi -" thru 2" psi 3" 75 psi FDA POLYPROPYLENE (FDA PP) Material: FDA grade polypropylene white in color Standard Gasket: EPDM Handle: 304L Stainless Steel Pin: 302 Stainless Steel Temperature Range: 0 F to 80 F** Working Pressure**: " and " 25 psi -" thru 2" psi 3" psi **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Clamps must be used in higher pressure applications; testing recommended.

Cam Operated Couplings Plastic Cam Operated Couplings Note that sizes are listed first due to the variety of materials offered Type A Adapter x FNPT SIZE - - 2 3 4 NYLON 560 0049* 560 0077 560 005 560 033 560 06* 560 089 560 027 560 0245 560 0273 PP 56 0052 56 0080* 56 008 56 036* 56 064 56 092 56 0220 FDA PVDF 565 00 565 0064 565 0078 565 0092 565 020 565 076 565 0204 565 0232 FDA PP 562 0083 562 0 562 067 562 095 562 0223 Type B Coupler x MNPT SIZE - - 2 3 4 NYLON 560 0385 560 043 560 044 560 0469* 560 0497 560 0525 560 0553 560 058 PP 56 0388 56 046 56 0444 56 0472* 56 00 56 0528 56 0556 FDA PVDF 565 0386 565 0400 565 0428 565 0484 565 052 565 0540 FDA PP 562 039 562 049 562 0475 562 03 562 053 Type C Coupler x Hose Barb SIZE - - 2 3 4 NYLON 560 0749 560 0777 560 0805 560 0833 560 086* 560 0889 560 097 560 0945 560 0973 PP 56 0724 56 0752 56 0780 56 0808* 56 0836 56 0864 56 0892 FDA PVDF 565 07 565 0764 565 0792 565 0848 565 0876 565 0904 FDA PP 562 0755 562 0783 562 0839 562 0867 562 0895 Type D Coupler x FNPT SIZE - - 2 3 4 NYLON 560 4 560 69* 560 97 560 225 560 253 560 28* 560 309 560 337 560 365 560 393 PP 56 088 56 6 56 44 56 72* 56 200 56 228 56 256 FDA PVDF 565 42 565 56 565 70 565 84 565 22 565 268 565 296 565 324 FDA PP 562 75 562 203 562 259 562 287 562 35 On,,, and sizes, the coupler and adapter portion is made to the standard, therefore these sizes will mate together. On the - size, the coupler and adapter portion is made to the - standard, therefore these sizes will mate together. *Limited stock availability; lead times and minimums may apply call for details.

Cam Operated Couplings Plastic Cam Operated Couplings Note that sizes are listed first due to the variety of materials offered Type E Adapter x Hose Barb SIZE - - 2 3 4 NYLON 560 56 560 589 560 67 560 645 560 673* 560 70 560 729 560 757* 560 785 PP 56 424 56 452 56 480 56 8* 56 536 56 564 56 592* FDA PVDF 565 590 565 604 565 632 565 688 565 76 565 744 FDA PP 562 595 562 623 562 679 562 707 562 735 Type F Adapter x MNPT SIZE - - 2 3 4 NYLON 560 953 560 98 560 2009 560 2037* 560 2065 560 2093 560 22 560 249 PP 56 760 56 788 56 86 56 844* 56 872 56 900 56 928 FDA PVDF 565 954 565 968 565 996 565 2052 565 2080 565 208 FDA PP 562 959 562 987 562 2043 562 207 562 2099 Type DP Plug SIZE - 2 3 4 NYLON 560 2989* 560 307* 560 3045* 560 3073* 560 30* 560 329* PP 56 360 56 388 56 326 56 3244 56 3272 FDA PVDF 565 2920 565 2948 565 2976 565 3004 565 3032 FDA PP 562 29 562 2939 562 2967 562 2995 562 3023 Type DC Cap SIZE - 2 3 4 NYLON 560 268* 560 2709* 560 2737* 560 2765* 560 2793* 560 282* PP 56 2488 56 256 56 2544 56 2572 56 2600 FDA PVDF 565 262 565 2640 565 2668 565 2696 565 2724 FDA PP 562 2603 562 263 562 2659 562 2687 562 275 On,,, and sizes, the coupler and adapter portion is made to the standard, therefore these sizes will mate together. On the - size, the coupler and adapter portion is made to the - standard, therefore these sizes will mate together. *Limited stock availability; lead times and minimums may apply call for details. NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2004 /04 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com

Newloc Brass Brass Push-to-Connect Fittings Fluid Transfer Specialists

Newloc Brass Brass Push-To-Connect Fittings Extremely easy to install no tools necessary Made of durable brass elbows and tees are forged Much higher temperature/pressure ratings than that of plastic Newloc Instant leak-proof connections No flow restrictions All male pipe threads come with a pre-applied fluoropolymer sealant Easy to disconnect and reuse Notes Installation Instructions: Construction materials: Body & Collet: Brass O - Ring: Buna-N (other materials available) Working pressure: Limited only by the working pressure of the plastic tubing used** Vacuum rating: Full** (29.9 in./hg) Working temperature: -0 F to 200 F** (higher temperatures are possible with special O -rings call for details). Cut tubing cleanly at 90 angle and push into collet 2. Installation complete and secure 3.To disconnect push in collet and pull tubing **Values listed are typical for the material used in manufacture, except where noted, and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for your application. Male Adapter TUBE OD x THREAD Use NEWLOC BRASS fittings with all types of semi-rigid to rigid plastic tubing including nylon and polyethylene.they may also be used with limited soft tubing sizes using tube supports (available). Pulling on the inserted tubing or increasing the pressure actually tightens the seal. Typical applications include systems for pneumatic control, robotics, instrumentation, and chemicals. Manifolds pre-mounted with NEWLOC BRASS fittings or nickel-plated NEWLOC BRASS (for improved aesthetics) are available call for details. All male pipe threads come with a pre-applied sealant of fluoropolymer, however for subsequent use it is recommended that sealant, such as PTFE Thread Sealant be used.the push-to-connect fitting ends are self-sealing do not use sealants at this connection. If tube disconnection is performed, it may be necessary to re-cut the end of the tubing to ensure perfect sealing when reattached. 620 003 620 00 620 002* 620 045 620 059 620 009* 620 0026* 620 0243 620 0257 620 027 620 0033* 620 0369 620 0383 620 0397 620 0404 620 0439 620 0446 620 0453 *Gasket supplied x NPTF x NPTF x 0-32 UNF 5/32 x NPTF 5/32 x NPTF 5/32 x 0-32 UNF 3/6 x 0-32 UNF x NPTF x NPTF x NPTF x 0-32 UNF x NPTF x NPTF x NPTF x NPTF x NPTF x NPTF x NPTF All items sold in increments of 5 pieces. 2

Newloc Brass Brass Push-To-Connect Fittings Union 90 Elbow 620 5738 620 5745 620 5759 620 5773 620 5780 TUBE OD 5/32 Swivel Female 90 Elbow TUBE OD x FNPT 620 5479 620 552 620 5528 620 559 620 569 5/32 x x x x x Swivel Male 90 Elbow 620 4527 620 4548 620 4555 620 4443* 620 4569 620 4590 620 4597 620 4604 620 4457* 620 4653 620 4660 620 4667 620 4674 620 4688 620 4695 *Gasket supplied TUBE OD x THREAD x NPTF 5/32 x NPTF 5/32 x NPTF 5/32 x 0-32 UNF 3/6 x NPTF x NPTF x NPTF x NPTF x 0-32 UNF x NPTF x NPTF x NPTF x NPTF x NPTF x NPTF Swivel Male Banjo 90 Elbow TUBE OD x THREAD 620 484* *Gasket supplied Union Connector 620 566 620 573 620 587 620 60 620 608 5/32 x 0-32 UNF TUBE OD 5/32 Male 90 Elbow TUBE OD x NPTF 620 456 620 477 620 498 620 429 620 4226 620 4233 620 4282 620 4289 620 4296 620 430 620 437 620 4324 Female 90 Elbow 620 578 620 599 620 524 620 5248 620 53 x 5/32 x 3/6 x x x x x x x x x x TUBE OD x FNPT x 5/32 x x x x All items sold in increments of 5 pieces. Reducing Union Connector 620 804 Female Adapter 620 2987 620 3022 620 320 620 334 620 3246 620 3260 Bulkhead Union 620 3526 620 3533 620 3547 620 356 620 3568 TUBE OD x TUBE OD x TUBE OD x FNPTF x 5/32 x x x x x TUBE OD 5/32 3

Newloc Brass Brass Push-To-Connect Fittings Female Bulkhead Union TUBE OD x FNPTF Plug STEM OD 620 3743 620 3757 620 3862 x x x 620 933 620 940 620 954 620 968 620 975 5/32 Reducer 620 888 620 8888 620 8937 STEM OD x TUBE OD x x 5/32 x 4-Way Union Connector 620 2903 620 2924 620 2938 TUBE OD Union Y Connector Expander STEM OD x TUBE OD BRANCH TUBE OD x STEM OD 620 902 620 9070 5/32 x x 620 230 620 2364 620 2378 5/32 x 5/32 x 5/32 x Tube to Hose Barb Adapter STEM OD x HOSE ID Male Y Adapter BRANCH TUBE OD x STEM NPTF 620 8720 x 620 986 620 2070 5/32 x x Male Adapter, Quick Disconnect with automatic shutoff 620 26 620 230 TUBE OD x NPTF x x 4 All items sold in increments of 5 pieces.

Newloc Brass Brass Push-To-Connect Fittings Union Tee 620 68 620 655 620 6522 620 6529 620 6543 620 65 Male Branch Tee 620 748 620 7439 620 7460 620 748 620 7488 620 7544 620 755 620 7558 620 7586 TUBE OD 5/32 3/6 TUBE OD x STEM NPTF x 5/32 x 3/6 x x x x x x x Female Branch Tee 620 8090 620 825 TUBE OD x STEM FNPTF x x Swivel Male Branch Tee 620 7705* 620 7852 620 7859 620 7922 620 7929 620 7957 620 7964 *Gasket supplied TUBE OD x STEM THREAD 5/32 x 0-32 UNF x NPTF x NPTF x NPTF x NPTF x NPTF x NPTF Female/Male Run Tee 620 8363 FNPTF x MNPTF x STEM TUBE OD x x Male Run Tee 620 6676 620 6697 620 6739 620 6746 620 6802 620 6809 620 686 TUBE OD x BRANCH NPTF x 5/32 x x x x x x Swivel Female Branch Tee 620 88 TUBE OD x STEM FNPTF x Swivel Male Run Tee 620 7047 620 7068 620 70 620 77 620 780 620 787 620 725 620 7222 TUBE OD x BRANCH THREAD x NPTF 5/32 x NPTF x NPTF x NPTF x NPTF x NPTF x NPTF x NPTF Reducing Union Tee 620 8538 TUBE OD x STEM OD x All items sold in increments of 5 pieces. 5

Tubing Options Superthane Pneumatic Colored Polyurethane Tubing Made from hydrolysis resistant, 85A durometer Ether polyurethane Stocked in 0 colors for easy multiple line identification Naturally flexible for close-in bending contains no plasticizers which could migrate and cause tube hardening or flow contamination Resistant to weathering, kinking, tearing, abrasion, impact, and radiation exposure Nylotube Nylon- & Nylon-2 Tubing Excellent resistance to flexural fatigue, tube vibration, and movement Lightweight with excellent bend radii and pressure ratings Resists crushing, abrasion, and cracking Standard availability in metric sizes and colors Very low moisture absorption:.4% maximum (at 73 F) Zelite Linear Low Density Polyethylene Tubing Made from non-toxic ingredients conforming to FDA standards Does not impart a taste or odor to critical streams Flexible, lightweight, durable Offers enhanced resistance to stress cracking Chemically inert; forms a good barrier to gases, vapors, and moisture Ask for our latest catalog Inside you ll find details on all of NewAge Industries tubing and hose products, plus Chemical Resistance Charts, Temperature and Measurement Conversions, and a Glossary. The custom section highlights thermal tube bonding, heat-formed shapes, coiling, and other fabrication services. Plastic and metal fittings and clamps are also included. Contact your NewAge Industries sales representative or local distributor to request a free copy. Newloc, Superthane, Nylotube, Zelite, NewAge, Fluid Transfer Specialists, and The "N" Logo are trademarks of NewAge Industries, Inc. WARRANTY: NewAge Industries products are warranted to be free from defects in material and workmanship. Any product found to carry such defects will be replaced without charge.this warranty is limited only to the replacement of NewAge Industries' products, item for item, which after examination by NewAge Industries are deemed defective. NewAge Industries specifically disclaims any other liability.the data supplied is provided as a helpful guideline and is believed to be reliable; however, nothing stated shall constitute a guarantee, recommendation, or warranty for any application. NOTICE: NewAge Industries, Inc. has been a privately owned corporation since 954. Neither the corporation nor its principals are affiliated, in any way, with any other group or entity either representing themselves as or being referred to by the term New-Age. NewAge Industries, Inc. 2006 0/06 DISTRIBUTOR NER 45 James Way Southampton, PA 8966 800--NEWAGE (800-6-3924) 25-526-2300 Fax: 800-837-856 25-526-290 psales@newageindustries.com