1.866.970.5948 apexfacades.com PINNACLE 600/650 apexfacades.com 1.2 Pinnacle Pg- 1 HIGH PERFORMANCE CURTAIN WALL
THIS PAGE INTENTIONALY LEFT BLANK apexfacades.com 1.2 Pinnacle Pg- 2
Series Curtain Wall is a thermally broken contemporary stick built curtain wall system that is suitable for low to high rise applications that require a high performance glazing system. The versatile installation methods of Pinnacle ensure compatibility with a wide variety of project applications. Pinnacle 650 series Curtain wall system features a split-mullion design for simplified field installation, without compromising performance. This captured, two side and four sided SSG system is available in array of back section dimensions to meet your project specific requirements. Finish options include anodized, powder, paint and split finishes. FEATURES Great value with simplified fabrication and installations methods that lead to cost savings Industry leading thermal and structural performance Structural Silicone Glazed (SSG) or Capped Options Industry standard and custom caps available Versatile Accommodates captured, two sided SSG or four-sided SSG Corner and Splayed Applications Shear block and screw spline design FINISHES Available in 7 standard anodized finishes Painted finishes in standard and custom colors Split finish option Multipurpose sleeve double as reinforcement Multiple mullion depths for various applications and spans Accommodates a variety of glass infills including Single, Double and Triple Glass chairs offer superior glazing support and allow for larger glazing units TECHNICAL SERVICES Wind Load Charts Thermal performance charts Design assistance and support OPTIONAL FEATURES Steel reinforcement Integrated entrance framing systems Compatible with Apex Vents and Doors apexfacades.com 1.2 Pinnacle Pg- 3
ARCHITECTURAL DETAILS apexfacades.com 1.2 Pinnacle Pg- 4
Reinforcing Options 3"x1" STL. BAR 34, 9 [1 3/8"] 600010 600020 600160 600030 600140 600150 75,3 [2 31/32"] 63 [2 15/32"] 25,4 [1"] TYP. 127 [5"] 152,4 [6"] 101,6 [4"] 6"x1" STL. BAR 63,5 [2 1/2"] 600040 4"x1" STL. BAR 63,5 [2 1/2"] 87,6 [3 7/16"] 5"x1" STL. BAR 63,5 [2 1/2"] 600170 44,8 [1 3/4"] 100,1 [3 15/16"] 63,5 [2 1/2"] 177,8 [7"] 63,5 2 1/2" 63,5 2 1/2" apexfacades.com 1.2 Pinnacle Pg- 5
Reinforcing Options 3"x1" STL. BAR 600050 600051 600150 600160 600052 600140 5"x1" STL. BAR 127 [5"] 152,4 [6"] 63,5 [2 1/2"] 63,5 [2 1/2"] 177,8 [7"] 79,3 [3 1/8"] 92,1 [3 5/8"] 53,6 [2 3/32"] 66,4 [2 5/8"] 101,6 [4"] 63,5 [2 1/2"] 4"x1" STL. BAR 600054 6"x1" STL. BAR 600170 63,5 [2 1/2" apexfacades.com 1.2 Pinnacle Pg- 6
30 [1 3/16"] 63,5 [2 1/2"] 600010 600140 REINFORCING, IF NECESSARY V1 H1 34,9 [1 3/8"] 63,5 [2 1/2"] 25,4 [1"] 152,4 [6"] 101,6 [4"] 600220 H1 600480 600240 600140-A V1 TYPICAL TRANSOM TO MULLION CONNECTION 25,4 [1"] 152,4 [6"] 101,6 [4"] apexfacades.com 1.2 Pinnacle Pg- 7
95 170 180 63,5 [2 1/2"] 600010 600140 REINFORCING, IF NECESSARY H2 101,6 [4"] 152,4 [6"] 25,4 [1"] 600220 600480 H2 600240 63,5 [2 1/2"] 85 85 101,6 [4"] 152,4 [6"] H3 25,4 [1"] 12,7 [1/2"] 12,7 [1/2"] 170 180 H3 apexfacades.com 1.2 Pinnacle Pg- 8
600010 30 [1 3/16"] 63,5 [2 1/2"] V4 H4 12,7 [1/2"] 63,5 [2 1/2"] 101,6 [4"] 25,4 [1"] 152,4 [6"] H4 600220 H4 600480 600240 133,4 [5 1/4"] 6000140-A 600050 V4 TYPICAL TRANSOM TO MULLION CONNECTION 25,4 [1"] 152,4 [6"] 101,6 [4"] apexfacades.com 1.2 Pinnacle Pg- 9
600050 30 [1 3/16"] 63,5 [2 1/2"] V5 H5 12,7 [1/2"] 63,5 [2 1/2"] 25,4 [1"] 101,6 [4"] 133,4 [5 1/4"] 15,8 [5/8"] BITE 12,7 [1/2"] H5 6000140-A 600050 V5 4-SIDE STRUCTURAL GLAZING ISOMETRIC VIEW 25,4 [1"] 101,6 [4"] 133,4 [5 1/4"] apexfacades.com 1.2 Pinnacle Pg- 10
63,5 [2 1/2"] 52,3 [2 1/16"] V6 152,4 [6"] VENT 63,5 [2 1/2"] H6 VENT 63,5 52,3 [2 1/2"] [2 1/16"] 25,4 63,5 29 [1"] [2 1/2"] [1 1/8"] H6 V6 12,7 [1/2"] 152,4 [6"] apexfacades.com 1.2 Pinnacle Pg- 11
600010 25,4 [1"] 15,9 [5/8"] 6000180 3,2 [1/8"] 25,4 [1"] 63,5 [2 1/2"] 98,4 [3 7/8"] 25,4 [1"] 152,4 [6"] 101,6 [4"] H7 MULLION - DOOR ADAPTOR 3,2 [1/8"] 50,8 [2"] 39,2 [1 17/32"] V7 TRANSOM - DOOR ADAPTOR 15,9 [5/8"] DOOR ADAPTOR ISOMETRIC VIEW apexfacades.com 1.2 Pinnacle Pg- 12
600060 TYPICAL TRANSOM TO MULLION CONNECTION 6 3,5 [2 1 / 2"] 25,4 [1"] 91,5 [3 19/32"] 153,2 [6 1/32"] 101,6 [4"] 45 6,3 [1/4"] 91,5 [3 19/32"] 600220 600250 H9 H9 90 CORNER MULLION 6" O.A. SYSTEM DEPTH apexfacades.com 1.2 Pinnacle Pg- 13
25,4 [1"] 177,8 [7"] 127 [5"] 6000070 177,8 [7"] 127 [5"] 45 25,4 [1"] 600220 H10 90 CORNER MULLION 7" O.A. SYSTEM DEPTH 600250 apexfacades.com 1.2 Pinnacle Pg- 14
18 [23/32"] 158,8 [6 1/4"] 127 [5"] 45 15,9 [5/8"] 25,4 [1"] 25,4 [1"] 600090 127 [5"] 158,8 [6 1/4"] 6 3,5 [2 1 / 2"] R12,7 [R1/ 2" ] H11-90 CORNER MULLION 6 1/4" O.A. SYSTEM DEPTH 600080 2 2,5 [7 / 8 "] 19 [3/4"] 25,9 [1 1/32"] MAX. BITE H12 90 CORNER MULLION 6 1/4" O.A. SYSTEM DEPTH apexfacades.com 1.2 Pinnacle Pg- 15
13 5 N O M IN AL ( 1 25-1 4 5 ) 600100 25,4 [1"] 158,8 [6 1/4"] 127 [5"] 2 3,5 [1/ 5 16"] H13 9,5 [3/8"] 135 CORNER MULLION 6 1/4" O.A. SYSTEM DEPTH 15,9 [5/8"] MAX. BITE apexfacades.com 1.2 Pinnacle Pg- 16
Pinnacle 650 3"x3/8" STL BAR, IF NECESSARY, E.G. 450270 650120 30,2 [1 3/16"] 63,5 [2 1/2"] 30,2 [1 3/16"] 650110 600145 REINFORCING, IF NECESSARY V8 H14 101,6 [4"] 54,2 [2 1/8"] 34,9 [1 3/8"] 63,5 [2 1/2"] 25,4 [1"] 152,4 [6"] 600220 600240 H16 SPLIT-MULLION 600480 600010 V8 25,4 [1"] 63,5 [2 1/2"] ISOMETRIC VIEW 25,4 [1"] 153,3 [6 1/32"] 101,6 [4"] apexfacades.com 1.2 Pinnacle Pg- 17
Pinnacle 650 600010 V9 H15 V10 V9 63,5 [2 1/2"] 9,5 [3/8"] 38,1 [1 1/2"] GALV. STL BACKPAN WITH MINERAL WOOL INSULATION 6,4 [ 1/4"] 650120 650110 6,4 [1/4"] SPANDREL DRAINAGE 8 4 [5/32"] [ 5/16"] V10 600220 600240 H15 600480 SPANDREL DRAINAGE 25,4 [1"] 153,3 [6 1/32"] 101,6 [4"] apexfacades.com 1.2 Pinnacle Pg- 18
3"x3/8" STL BAR, IF NECESSARY, E.G. 450270 650120 30,2 [1 3/16"] 63,5 [2 1/2"] 30,2 [1 3/16"] 650110 600145 REINFORCING, IF NECESSARY Pinnacle 650 V11 H16 101,6 [4"] 19,1 [3/4"] 12,6 [1/2"] BITE, TYP. 25,4 [1"] 152,4 [6"] 600220 600480 600240 SPLIT-MULLION, 2SSG H16 OPTION - VERTICAL CAPS SILICONE & BACKER ROD 600340 ISOMETRIC VIEW 25,4 [1"] V11 152,4 [6"] 101,6 [4"] TRANSOM, 2SSG OPTION - VERTICAL CAPS apexfacades.com 1.2 Pinnacle Pg- 19
Pinnacle 650 650130 63,5 [2 1/2"] 650110 V12 H17 152,4 [6"] 19,1 [3/4"] 12,6 [1/2"] BITE, TYP. H17 SPLIT-MULLION, 2SSG OPTION - HORIZONTAL CAPS 600010 ISOMETRIC VIEW 25,4 [1"] V12 101,6 [4"] 133,4 [5 1/4"] TRANSOM, 2SSG OPTION - HORIZONTAL CAPS apexfacades.com 1.2 Pinnacle Pg- 20
650130 63,5 [2 1/2"] Pinnacle 650 650110 H18 V13 PA 6.6 THERMAL SPACER 650610 WEATHER SEAL GASKET 19,1 [3/4"] 12,6 [1/2"] SPANDREL DRAINAGE H18 SPLIT-MULLION, 4SSG OPTION - HORIZONTAL CAPS 600050 8 [ 5/16"] 19,1 [3/4"] 600050 6, 4 [ 1/ 4"] ISOMETRIC VIEW 25,4 [1"] V13 101,6 [4"] 133,4 [5 1/4"] TRANSOM, 4SSG OPTION - HORIZONTAL CAPS apexfacades.com 1.2 Pinnacle Pg- 21
FABRICATION DETAILS apexfacades.com 1.2 Pinnacle Pg- 22
Fabrication Details 88,9 [3 1/2"] 88,9 [3 1/2"] 89,0 600160-A 30,2 [1 3/16"] 12,2±0,3 [15/32±0"] 12,2±0,3 [15/32±0"] 58 [2 9/32"] 58 [2 9/32"] 22,2 [7/8"] 114,3 [4 1/2"] 30,2 [1 3/16"] R2 [R3/32"] 89,0 30,2 [1 3/16"] 12,7±0,3 [1/2±0"] 58 [2 9/32"] 22,2 [7/8"] 12,2±0,3 [15/32±0"] 30,2 [1 3/16"] 114,3 [4 1/2"] 600170-A 58 [2 9/32"] R2 [R3/32"] apexfacades.com 1.2 Pinnacle Pg- 23
139,7 [5 1/2"] 89,0 30,2 [1 3/16"] 12,2±0,3 [15/32±0"] 12,2±0,3 [15/32±0"] 30,2 [1 3/16"] 139,7 [5 1/2"] 600180-A 58 [2 9/32"] 58 [2 9/32"] 22,2 [7/8"] R2 [R3/32"] 46,0 600400-A R6 [R1/4"] R2,5 [R3/32"] 30,2 [1 3/16"] 139,1 [5 15/32"] 38,1 [1 1/2"] 38,1 [1 1/2"] [ 0 48,5-0,5 0" 1 29/32-1/ 32"] 23,6 [15/16"] apexfacades.com 1.2 Pinnacle Pg- 24
165,1 [6 1/2"] 89,0 30,2 [1 3/16"] 12,2±0,3 [15/32±0"] 58 [2 9/32"] 22,2 [7/8"] 12,2±0,3 [15/32±0"] 30,2 [1 3/16"] 165,1 [6 1/2"] 600170-A 58 [2 9/32"] R2 [R3/32"] apexfacades.com 1.2 Pinnacle Pg- 25
(4) Ø5 [Ø3/ 16"] 600010 63,5 [2 1/2"] 20,6 [13/16"] 22,2 [7/8"] 63,5 [2 1/2"] 22,2 [7/8"] 63,5 [2 1/2"] [ +0,5 12,7-0 1/2 +1/32" -0" ] LENGTH [ +0,5 12,7-0 1/2 +1/32" -0" ] 101,6 [4"] 116,6 [4 19/32"] 600050 (4) Ø5 [Ø3/ 16"] 63,5 [2 1/2"] [ +0,5 12,7-0 1/2 +1/32" -0" ] 20,6 [13/16"] LENGTH [ +0,5 12,7-0 1/2 +1/32" -0" ] 101,6 [4"] apexfacades.com 1.2 Pinnacle Pg- 26
15 [19/32"] 31,8 [1 1/4"] 45 (4) Ø 5 [Ø 3/ 1 6"] LENGTH LENGTH +0,5 12,7-0 [ 1/2 +1/32" -0" ] 20,6 [13/16"] 22,2 [7/8"] 116,6 [4 19/32"] 63,5 [2 1/2"] 101,6 [4"] 116,6 [4 19/32"] apexfacades.com 1.2 Pinnacle Pg- 27
Series Curtain Wall Thermal Chart NFRC THERMAL SIMULATION CHART PINNACLE 600 CURTAIN WALL SIMULATION METHOD: ANSI/NFRC 100, Procedure for Determining Fenestration Product U-Factors (2014) ANSI/NFRC 200, Procedure for Determining Fenestration Product Solar Heat Gain Coefficients at Normal Incidence (2014) NFRC 500, Procedure for Determining Fenestration Product Condensation Resistance Values (2014) Technical Interpretation Manual (2010) SIMULATION SIZE: 2000mm x 2000mm (79in in x 79in) apexfacades.com 1.2 Pinnacle Pg- 28
Windload & Deadload Charts WINDLOAD CHARTS PINNACLE 600010 CHARTS WINDLOAD CHARTS PINNACLE 600020 CHARTS 1) 600010 Single Span Chart 1) 600020 Single Span Chart 2) 600010 Single Span + Sleeve Chart 3) 600010 Single Span + Sleeve + Steel Reinforcing Chart 2) 600020 Single Span + Sleeve Chart 3) 600020 Single Span + Sleeve + Steel Reinforcing Chart 4) 600010 Single Span + Steel Reinforcing Chart 5) 600010 Double Span 4) 600020 Single Span + Steel Reinforcing Chart 5) 600020 Double Span 6) 600010 Double Span + Sleeve Chart 7) 600010 Double Span + Sleeve & Steel Reinforcing Chart 6) 600020 Double Span + Sleeve Chart 7) 600020 Double Span + Sleeve & Steel Reinforcing Chart WINDLOAD & DEADLOAD CHARTS TABLE OF CONTENTS 8) 600010 Double Span + Steel Reinforcing Chart WINDLOAD CHARTS PINNACLE 600030 CHARTS 8) 600020 Double Span + Steel Reinforcing Chart WINDLOAD CHARTS PINNACLE 600040 CHARTS 1) 600030 Single Span Chart 1) 600040 Single Span Chart 2) 600030 Single Span + Sleeve Chart 3) 600030 Single Span + Sleeve + Steel Reinforcing Chart 2) 600040 Single Span + Sleeve Chart 3) 600040 Single Span + Sleeve + Steel Reinforcing Chart 4) 600030 Single Span + Steel Reinforcing Chart 5) 600030 Double Span 4) 600040 Single Span + Steel Reinforcing Chart 5) 600040 Double Span 6) 600030 Double Span + Sleeve Chart 7) 600030 Double Span + Sleeve & Steel Reinforcing Chart 6) 600040 Double Span + Sleeve Chart 7) 600040 Double Span + Sleeve & Steel Reinforcing Chart 8) 600030 Double Span + Steel Reinforcing Chart 8) 600040 Double Span + Steel Reinforcing Chart apexfacades.com 1.2 Pinnacle Pg- 29
Windload & Deadload Charts WINDLOAD CHARTS PINNACLE 600050 CHARTS WINDLOAD CHARTS PINNACLE 600051 CHARTS 1) 600050 Single Span Chart 1) 600051 Single Span Chart 2) 600050 Single Span + Sleeve Chart 3) 600050 Single Span + Sleeve + Steel Reinforcing Chart 2) 600051 Single Span + Sleeve Chart 3) 600051 Single Span + Sleeve + Steel Reinforcing Chart 4) 600050 Single Span + Steel Reinforcing Chart 5) 600050 Double Span 4) 600051 Single Span + Steel Reinforcing Chart 5) 600051 Double Span 6) 600050 Double Span + Sleeve Chart 7) 600050 Double Span + Sleeve & Steel Reinforcing Chart 6) 600051 Double Span + Sleeve Chart 7) 600051 Double Span + Sleeve & Steel Reinforcing Chart 8) 600050 Double Span + Steel Reinforcing Chart 8) 600051 Double Span + Steel Reinforcing Chart WINDLOAD CHARTS PINNACLE 600052 CHARTS WINDLOAD CHARTS PINNACLE 600054 CHARTS PINNACLE DEADLOAD CHARTS 1) 600052 Single Span Chart 1) 600054 Single Span Chart 1) 600006 Dead Load Chart 2) 600052 Single Span + Sleeve Chart 3) 600052 Single Span + Sleeve + Steel Reinforcing Chart 4) 600052 Single Span + Steel Reinforcing Chart 5) 600052 Double Span 2) 600054 Single Span + Sleeve Chart 3) 600054 Single Span + Sleeve + Steel Reinforcing Chart 4) 600054 Single Span + Steel Reinforcing Chart 5) 600054 Double Span 2) 600010 Dead Load Chart 3) 600020 Dead Load Chart 4) 600030 Dead Load Chart 5) 600040 Dead Load Span 6) 600050 Dead Load Chart 7) 600051 Dead Load Chart 6) 600052 Double Span + Sleeve Chart 7) 600052 Double Span + Sleeve & Steel Reinforcing Chart 6) 600054 Double Span + Sleeve Chart 7) 600054 Double Span + Sleeve & Steel Reinforcing Chart 8) 600052 Dead Load Chart 9) 600054 Dead Load Chart 8) 600052 Double Span + Steel Reinforcing Chart 8) 600054 Double Span + Steel Reinforcing Chart apexfacades.com 1.2 Pinnacle Pg- 30
Windload Charts GENERAL NOTES WINDLOAD Pages 52-84 CHARTS 1. Assume horizontal members (if any) provide lateral support for seismic loads. 2. Steel reinforcing inertia value expressed in aluminum for total inertia value ( i.e. steel value is factored by ratio of steel/aluminum modules values). 4. Mullion freely supported at ends. 5. Value of mullion includes back section and nosing 6. All reinforcing shown in these charts considered that it is mechanically fastened to the aluminum extrusion. Fastening requirements to be reviewed and approved by Engineer. DEADLOAD Pages 84-88 CHARTS 1. Deflection requirements comply with S157-05/S157.1-05 and AAMA TIR-A11-2015. Deflection Limit - 1/8". 2. Transom freely supported at ends with setting blocks at 1/4 or 1/8 of transom length or 6". 3. Glass unit - 6mm / 6 mm. 3. Deflection requirements comply with S157-05/S157.1-05 and AAMA TIR-A11-2015. Deflection Limit - L/175. (Note: to convert to L/240 + 1/4" deflection limit when H> 13.5 ft., multiply mullion spacing by k = 0.73 + 7.3/H, where H - mullion height in ft.) *Charts are based on deflection analysis only and considered for estimation purposes only. Designer has to take necessary steps to make appropriate engineering calculations as per applicable Building Codes and regulations for complete design, i.e. stress, slenderness, local buckling. 600010 SINGLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 31
Windload Charts 600010 SINGLE SPAN +SLEEVE WINDLOAD CHART 600010 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 32
Windload Charts 600010 SINGLE SPAN +SLEEVE REINFORCING WINDLOAD CHART 600010 DOUBLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 33
Windload Charts 600010 DOUBLE SPAN +SLEEVE WINDLOAD CHART 600010 DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 34
Windload Charts 600010 DOUBLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART 600020 SINGLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 35
Windload Charts 600020 SINGLE SPAN +SLEEVE WINDLOAD CHART 600020 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 36
Windload Charts 600020 SINGLE SPAN WITH STEEL REINFORCING WINDLOAD CHART 600020 DOUBLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 37
Windload Charts 600020 DOUBLE SPAN +SLEEVE WINDLOAD CHART 600020 DOUBLE SPAN + SLEEVE + STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 38
Windload Charts 600020 DOUBLE SPAN WITH STEEL REINFORCING WINDLOAD CHART 600030 SINGLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 39
Windload Charts 600030 SINGLE SPAN +SLEEVE WINDLOAD CHART 600030 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 40
Windload Charts 600030 SINGLE SPAN WITH STEEL REINFORCING WINDLOAD CHART 600030 DOUBLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 41
Windload Charts 600030 DOUBLE SPAN + SLEEVE WINDLOAD CHART 600030 DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 42
Windload Charts 600030 DOUBLE SPAN WITH STEEL REINFORCING WINDLOAD CHART 600040 SINGLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 43
Windload Charts 600040 SINGLE SPAN +SLEEVE WINDLOAD CHART 600040 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 44
Windload Charts 600040 SINGLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART 600040 DOUBLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 45
Windload Charts 600040 DOUBLE SPAN +SLEEVE WINDLOAD CHART 600040 DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 46
Windload Charts 600040 DOUBLE SPAN WITH STEEL REINFORCING WINDLOAD CHART 600050 SINGLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 47
Windload Charts 600050 SINGLE SPAN +SLEEVE WINDLOAD CHART 600050 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 48
Windload Charts 600050 DOUBLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART 600050 DOUBLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 49
Windload Charts 600050 DOUBLE SPAN +SLEEVE WINDLOAD CHART 600050 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 50
Windload Charts 600050 DOUBLE SPAN WITH STEEL REINFORCING WINDLOAD CHART 600051 SINGLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 51
Windload Charts 600051 SINGLE SPAN +SLEEVE WINDLOAD CHART 600051 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 52
Windload Charts 600051 SINGLE SPAN WITH STEEL REINFORCING WINDLOAD CHART 600051 DOUBLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 53
Windload Charts 600051 DOUBLE SPAN +SLEEVE WINDLOAD CHART 600051 DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 54
Windload Charts 600051 DOUBLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART 600052 SINGLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 55
Windload Charts 600052 SINGLE SPAN +SLEEVE WINDLOAD CHART 600052 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 56
Windload Charts 600052 SINGLE SPAN WITH STEEL REINFORCING WINDLOAD CHART 600052 DOUBLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 57
Windload Charts 600052 DOUBLE SPAN +SLEEVE WINDLOAD CHART 600052 DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 58
Windload Charts 600052 DOUBLE SPAN WITH STEEL REINFORCING WINDLOAD CHART 600054 SINGLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 59
Windload Charts 600054 SINGLE SPAN +SLEEVE WINDLOAD CHART 600054 SINGLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 60
Windload Charts 600054 SINGLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART 600054 DOUBLE SPAN WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 61
Windload Charts 600054 DOUBLE SPAN +SLEEVE WINDLOAD CHART 600054 DOUBLE SPAN + SLEEVE +STEEL REINFORCING WINDLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 62
Windload Charts 600054 DOUBLE SPAN WITH SLEEVE REINFORCING WINDLOAD CHART 600006 DOUBLE SPAN DEADLOAD CHART DEADLOAD CHARTS PINNACLE 600 apexfacades.com 1.2 Pinnacle Pg- 63
Deadload Charts 600010 DEADLOAD CHART 600020 DEADLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 64
Deadload Charts 600030 DEADLOAD CHART 600040 DEADLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 65
Deadload Charts 600050 DEADLOAD CHART 600051 DEADLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 66
Deadload Charts 600052 DEADLOAD CHART 600054 DEADLOAD CHART apexfacades.com 1.2 Pinnacle Pg- 67
apexfacades.com 1.2 Pinnacle Pg- 68
PARTS LIST apexfacades.com 1.2 Pinnacle Pg- 69
Parts List PART # CROSS SECTION DESCRIPTION NOTES 600010 2.5" x 4" (63mm X 102mm) Mullion (6" [152mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: 4.400 (mm4: 1,831,300) Iyy in4: 1.561 (mm4: 649,737) 600020 2.5" x 5" (63mm X 127mm) Mullion (7" [178mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: 7.400 (mm4: 3,080,162) Iyy in4: 1.845 (mm4: 767,945) 600030 2.5" x 6" (63mm X 152mm) Mullion (8" [203mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: 10.504 (mm4: 4,732,260) Iyy in4: 2.129 (mm4: 886,153) apexfacades.com 1.2 Pinnacle Pg- 70
Parts List PART # CROSS SECTION DESCRIPTION NOTES 600040 2.5" x 7" (63mm X 178mm) Mullion (9" [229mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: 16.406 (mm4: 6,828,650) Iyy in4: 2.413 (mm4: 1,004,361) 600054 2.5" x 7" (63mm X 178mm) Mullion SSG (8.25" [209mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: 14.159 (mm4: 5,893,427) Iyy in4: 2.413 (mm4: 1,004,203) apexfacades.com 1.2 Pinnacle Pg- 71
Parts List PART # CROSS SECTION DESCRIPTION NOTES 600050 2.5" x 4" (63mm X 102mm) Mullion SSG (5.25" [133mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: 3.613 (mm4: 1,504,009) Iyy in4: 1.561 (mm4: 649,579) 600051 2.5" x 5" (63mm X 127mm) Mullion SSG (6.25" [159mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: 6.212 (mm4: 2,585,628) Iyy in4: 1.845 (mm4: 767,787) 600052 2.5" x 6" (63mm X 152mm) Mullion SSG (7.25" [184mm] O.A. System Depth Standard Length 289" (7341mm) Ixx in4: 9.694 (mm4: 4,035,107) Iyy in4: 2.129 (mm4: 885,995) apexfacades.com 1.2 Pinnacle Pg- 72
Parts List PART # CROSS SECTION DESCRIPTION NOTES 600060 90 Corner Mullion 2.5"x7" (63mm X 90 178mm) (6" [152mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: 13.134 (mm4: 5,466,786) Iyy in4: 2.191 (mm4: 911,873) 600070 90 Corner Mullion 2.5" x 8.5" (63mm X 90 216mm) (7" [178mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: 21.610 (mm4: 8,994,954) Iyy in4: 2.592 (mm4: 1,079,046) apexfacades.com 1.2 Pinnacle Pg- 73
Parts List PART # CROSS SECTION DESCRIPTION NOTES 600080 90 90 Outside Corner Mullion 2.5" x 8" (63mm X 203mm) SSG (6.25" [159mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: 16.781 (mm4: 6,984,677) Iyy in4: 2.496 (mm4: 1,038,738) 600090 90 Inside Corner Mullion 2.5" x 8" (63mm X 203mm) SSG 90 (6.25" [159mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: 14.163 (mm4: 5,894,930) Iyy in4: 2.390 (mm4: 994,907) apexfacades.com 1.2 Pinnacle Pg- 74
Parts List PART # CROSS SECTION DESCRIPTION NOTES 600100 135 Mullion 2.5" x 7" (63mm X 178mm) 135 SSG (6.25" [159mm] O.A. System Depth) Standard Length 289" (7341mm) Range of 125 degree to 145 degree can be achieved Ixx in4: 7.917 (mm4: 3,295,408) Iyy in4: 1.945 (mm4: 809,622) 600006 2.5" x 2.5" (63mm X 63mm) Mullion (4.5" [114mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: 1.500 (mm4: 624,148) Iyy in4: 1.135 (mm4: 472,425) 600004 2.5" x 1" (63mm X 25mm) Mullion (Veneer) (3" [76mm] O.A. System Depth) Ixx in4: 0.455 (mm4: 189,530) Iyy in4: 0.170 (mm4: 70,925) Standard Length 289" (7341mm) 600005 2.5" x 1" (63mm X 25mm) Open Back Mullion (Veneer) (3" [76mm] O.A. System Depth) Ixx in4: 0.480 (mm4: 199,624) Iyy in 4: 0.113 (mm4: 47,024) Standard Length 289" (7341mm) apexfacades.com 1.2 Pinnacle Pg- 75
Parts List Pinnacle 650 PART # CROSS SECTION DESCRIPTION NOTES 650110 2.5" x 4" (63mm X 102mm) Split-Mullion, Male. (6" [152mm] O.A. System Depth for Captured Glazing) (5.25" [133mm] O.A. System Depth for SSG) Standard Length 289" (7341mm) Ixx in4: 1.594 (mm4: 663,347) Iyy in4: 0.098 (mm4: 40,853) 650120 2.5" x 4" (63mm X 102mm) Split-Mullion, Female for Captured Glazing (6" [152mm] O.A. System Depth) Standard Length 189" (7341mm) Ixx in4: 2.637 (mm4: 1,097,480) Iyy in4: 0.261 (mm4: 108,541) 650130 2.5" x 4" (63mm X102mm) Split-Mullion, Female for SSG (5.25" [133mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: 2.084 (mm4: 867,345) Iyy in4: 0.218 (mm4: 90,563) apexfacades.com 1.2 Pinnacle Pg- 76
Parts List Pinnacle 650 PART # CROSS SECTION DESCRIPTION NOTES 650112 2.5" x 5" (63mm X 127mm) Split-Mullion, Male. (7" [178mm] O.A. System Depth Captured Glazing) (6.25" [159mm] O.A. System Depth SSG) Standard Length 289" (7341mm) Ixx in4: 2.783 (mm4: 1,158,305) Iyy in4: 0.104 (mm4: 43,467) 650122 2.5" x 5" (63mm X 127mm) Split-Mullion, Female for Captured Glazing (7" [178mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: 4.410 (mm4: 1,835,785) Iyy in4: 0.287 (mm4: 119,387) 650132 2.5" x 5" (63mm X 127mm) Split-Mullion, Female for SSG (6.25" [159mm] O.A. System Depth) Standard Length 289" (7341mm) Ixx in4: 3.583 (mm4: 1,491,296) Iyy in4: 0.235 (mm4: 97,709) apexfacades.com 1.2 Pinnacle Pg- 77
Parts List PART # CROSS SECTION DESCRIPTION NOTES 600140 3.5" (89mm) Reinforcing Sleeve for 4" (102mm) Mullion (6" [152mm] O.A. System Depth) Standard Length 289" (7341mm) Mill Finish 600150 4.5" (114mm) Reinforcing Sleeve for 5" (127mm) Mullion (7" [178mm] O.A. System Depth) Standard Length 289" (7341mm) Mill Finish 600160 5.5" (140mm) Reinforcing Sleeve for 6" (152mm) Mullion (8" [203mm] O.A. System Depth) Standard Length 289" (7341mm) Mill Finish apexfacades.com 1.2 Pinnacle Pg- 78
Parts List PART # CROSS SECTION DESCRIPTION NOTES 600170 6.5" (165mm) Reinforcing Sleeve for 7" (178mm) Mullion (9" [229mm] O.A. System Depth) Standard Length 289" (7341mm) Mill Finish 650145 Alignment Sleeve for 4" (102mm) Split-Mullion (6" [152mm] O.A. System Depth) Standard Length 289" (7341mm) Mill Finish 650155 Alignment Sleeve for 6" (152mm) Split-Mullion (7" [178mm] O.A. System Depth) Standard Length 289" (7341mm) Mill Finish apexfacades.com 1.2 Pinnacle Pg- 79
Parts List PART # CROSS SECTION DESCRIPTION NOTES 600180 Thermally Broken Door Adaptor, Regular Ixx in4: 2.256 (mm4: 938,990) Iyy in4: 0.310 (mm4: 128,921) Standard Length 262" (6655mm) Adaptor for use with Pinnacle 600/650 and Keystome 500/550 Curtainwall. Available in split finish See Detail page 33 600190 Thermally Broken Door Adaptor, Wide Ixx in4: 2.671 (mm4: 1,111,855) Iyy in4: 0.628 (mm4: 261,230) Standard length 262" (6655mm) Integrates door into Pinnacle 600/650 and Keystone 500/550 curtain wall, with 1" IGU glazing. Recommended for use with electric strikes. Available in split finish 600200 Slimline Door Adaptor Standard Length 262" (6655mm) 600210 Slimline Door Adaptor Cap Standard Length 262" (6655mm) apexfacades.com 1.2 Pinnacle Pg- 80
Parts List PART # CROSS SECTION DESCRIPTION NOTES 600220 2.5" (63mm) Pressure Plate - Regular Duty Standard Length 289" (7341mm) Mill Finish Prepunched with 0.275" (7mm) holes at 8" (203mm) on center 600240 2.5" (63mm) Standard Cap.625" (16mm) Height Standard Length 289" (7341mm) 600250 2.5" (63mm) Corner Cap.625" (16mm) Height Standard Length 289" (7341mm) 600260 2.5" (63mm) Transom Cap.5" (12mm) Height, (Optional) Standard Length 289" (7341mm) apexfacades.com 1.2 Pinnacle Pg- 81
Parts List PART # CROSS SECTION DESCRIPTION NOTES 600270 2.5" (63mm) Raised Profile Cap.875" (22mm) Height (Optional) Standard Length 289" (7341mm) 600290 Optional Jamb Adaptor for 1" (25mm) IG Unit Standard Length 289" (7341mm) Optional High Performance application. For use with pvc Jamb Adaptor part number 600520 600291 Glazing Adaptor for 0.25" (6mm) Glazing Standard Length 289" (7341mm) 600292 Perimeter Flange Adaptor Standard Length 289" (7341mm) Thermally Improved profile 600300 Windload Bracket - Lineal Standard Length 144" (3658mm) Mill Finish 2.5" (63mm) sightline system apexfacades.com 1.2 Pinnacle Pg- 82
Parts List PART # CROSS SECTION DESCRIPTION NOTES 600310 0.250" (6mm) Serrated Washer - Lineal Fabricated and punched to Customer Requirements Mill Finish 600320 Dead Load Bracket - Lineal Standard Length 144" (3658mm) Mill Finish 600140-A 3.5" (89mm) Shear Block for 4" (102mm) Mullion (6" [152mm] O.A. System Depth) Standard Length 1.18" (30mm) Mill Finish Transom-to-mullion connection Fabricated with installation holes 600150-A 4.5" (114mm) Shear Block for 5" (127mm) Mullion (7" [178mm] O.A. System Depth) Standard Length 1.18" (30mm) Mill Finish Transom-to-mullion connection Fabricated with installation holes apexfacades.com 1.2 Pinnacle Pg- 83
Parts List PART # CROSS SECTION DESCRIPTION NOTES 600160-A 5.5" (140mm) Shear Block for 6" (152mm) Mullion (8" [203mm] O.A. System Depth) Standard Length 1.18" (30mm) Mill Finish Transom-to-mullion connection Fabricated with installation holes 600170-A 6.5" (165mm) Shear Block for 7" (178mm) Mullion (9" [229mm] O.A. System Depth) Standard Length 1.18" (30mm) Mill Finish Transom-to-mullion connection Fabricated with installation holes 600400-A Shear Block For Corner Mullions Standard Length 1.5625" (40mm) Mill Finish For Transom-to-corner mullion connections Fabricated with installation holes See Architectural Details in this section 600410-A 1.65" (20mm) Corner Key Mill Finish. For Thermally Broken Door Adaptor, Regular corner connection part number 600180. 1 pc. per connection apexfacades.com 1.2 Pinnacle Pg- 84
Parts List PART # CROSS SECTION DESCRIPTION NOTES 600410-B 1.65" (42mm) Corner Key Mill Finish. For Thermally Broken Door Adaptor, Wide corner connection part number 600190. 2 pcs. per connection 600430-A 1.77" (45mm) Corner Key Mill Finish. For Thermally Broken Door Adaptor, Regular corner connection part number 600180. 1 pc. per connection 600460-A Setting Block Chair for 1.75" (44mm) Triple IG Glazing Captured Standard Length 4" (102mm) Mill Finish 0.5" (12mm) Bite 600470-A Setting Block Chair for 1.75" (44mm) Triple IG Glazing SSG Standard Length 4" (102mm) Mill Finish 0.875" (22mm) Bite 600330-A Setting Block Chair for 1" (25mm) Double IG Glazing Captured Standard Length 4" (102mm) Mill Finish 0.5" (12mm) Bite apexfacades.com 1.2 Pinnacle Pg- 85
Parts List PART # CROSS SECTION DESCRIPTION NOTES 600335-A Setting Block Chair for 1" (25mm) Double IG Glazing SSG Standard Length 4" (102mm) Mill Finish 0.875" (22mm) glazing bite, 0.75" (19mm) silicone weather bead 600350-A Setting Block Chair for 1" (25mm) Double IG Glazing SSG Standard Length 4" (102mm) Mill Finish 1" (25mm) glazing bite, 0.5" (12mm) weather bead 600190-A Sheer Block - Veneer Standard Length 1.18" (30mm) Mill Finish Fabricated with 2 fastening holes For use with 2.5"X2.5" (63mmX- 63mm) Mullion part number 600006, 2.5" X 1" (63mm X 25mm) Mullion (Veneer) part number 600004 and 2.5" X 1" (63mm X 25mm) Open Back Mullion (Veneer) part number 600005 600480 Efficiency Plus Thermal Break for 1" (25mm) Double Glazing 600510 Efficiency Plus 3 Thermal Break for 1.75" (44mm) Triple Glazing 600520 Jamb Adaptor Thermal Break for 1.75" (44mm) Triple Glazing Standard Length 288" (7315mm) Black Polyamide Standard Length 288" (7315mm) Black Polyamide Standard Length 288" (7315mm) Black PVC For use with Optional Jamb Adaptor part number 600290 apexfacades.com 1.2 Pinnacle Pg- 86
Parts List PART # CROSS SECTION DESCRIPTION NOTES 450270 #10-1 1/2" Pan Head Zinc Plated Self-Tapping Screw, Robertson Drive 200310 #10-1/2" SS (18-8) Pan Head Self- Tapping Screw, Robertson Drive 600525 #10-5/8" SS (18-8) Pan Head Self- Tapping Screw, Robertson Drive 600535 Ø1/4-20 X 1 1/2" Long SS (18-8) Robertson Drive Screw - Self Tap tip 600537 Ø1/4-20 X 2.25" LONG SS (18-8) Robertson Drive Screw - Self Tap tip 600560 #10-7/8" PAN Head Zinc-Plated Self-Drilling Screw, Shear block-to-mullion, mullion-to-transom attachment Unit: 100 piece Attachment of Door Stop Base part number 200165 to Mullion Attachment of Transom 450050 to Mullion 45010 via Shear Block 450110 Unit: 100 piece Attachment of Transom to Mullion Unit: 100 piece Attachment of Pressure Plate 1" (25mm) IG Unit Unit: piece Attachment of Pressure Plate 1 3/4" (44mm) IG Unit Unit: piece Attachment of vent frame into the curtain wall 600565 Captured Glazing Interior Gasket Material/Duro: EPDM/70 Color: Black Unit: Roll 200 Feet (61M) 600570 2 or 4 Sided SSG Glazing Gasket Material/Duro: Silicone/70 Color: Black Unit: Roll 250 Feet (76M) 600580 High Performance 3-in-1 Exterior Glazing Gasket 600581 Standard Pressure Plate Gasket at Edges 600582 Standard Pressure Plate Gasket at Center Material/Duro: EPDM/70 Color: Black Unit: Reel 100 Feet (30M) For use with 2.5" (63mm) pressure plate Material/Duro: EDPM/70 Color: Black Unit: Roll 200 Feet (61M) For use Pressure Plate 600220 at edges Material/Duro: EDPM/70 Color: Black Unit: Roll 200 Feet (61M) For use Pressure Plate 600220 at center apexfacades.com 1.2 Pinnacle Pg- 87
Parts List 650600 Main Seal Gasket Split Mullion Material/Duro: Silicone EDPM/70 Color: Black/Lubricated Unit: Roll 150 Feet (46M) 650610 Weather Seal Gasket, SSG Material/Duro: Silicone EDPM/70 Color: Black Unit: Roll 150 Feet (46M) 600590 1/4" x 1 1/4" (6mm X 32mm) Setting Block, 4" (102mm) Long, SSG Glazing Material/Duro: Silicone/80 Color: Black Unit: pc. 600585 1/8" X 1 1/4" (3mm X 32mm) Setting Block, 4" (102mm) Long, Captured Glazing 200240 Pile Weatherstripping, 5/16" (8mm) Height 200260 High Performance Threshold Bulb Seal 600630 1/4" X 1 3/4" (6mm X 44mm) Setting Block, 4" (102mm) Long 600650 1/4" X 1 3/4" (3mm X 44mm) Setting Block, 4" (102mm) Long Material/Duro: Silicone/80 Color: Black Unit: pc. for use with captured glazing with 1/2" (12mm) bite in Keystone 500/550 and /650 Material: Fiber Pile with Fin Color: Grey Unit: Reel 1000 Feet (305M) For use with Standard Door Stops Material/Duro: TPE Color: Black Unit: Reel 500 Feet (152M) For use at Latch Threshold Material/Duro: Silicone/85 Color: Black Unit: pc. For use with 1.750" (44mm) Triple Glazing SSG Material/Duro: Silicone/85 Color: Black Unit: pc. For use with 1.750" (44mm) Triple Glazing Captured apexfacades.com 1.2 Pinnacle Pg- 88