Version 5.0 Table of Contents Vivid S 270 Static 2-11 Specifications Technical Specifications 3-5 Epistar 5 Nichia 5 Testing Certifications 6 Fixture Testing 6 Photometric Data 7 Charts 8-11 Vivid S 270 Dynamic White 12-19 Specifications Technical Specifications 13-14 Testing Photometric Data 14 Certifications 15 Fixture Testing 15 Charts 16-19 Vivid S 270 RGB 20-26 Specifications Technical Specifications 21-22 Testing Photometric Data 22 Certifications 23 Fixture Testing 23 Charts 24-26 Vivid S 270 Pixel 27-32 Specifications Technical Specifications 28-29 Testing Photometric Data 29 Certifications 30 Fixture Testing 30 Charts 31-32 Physical Specifications 33 Part Number Naming 34 Connectors 35-39 Seamless 35 Submersible Seamless 36 Snap 37-38 Swivel 38 Barrel 39 Mounting Hardware 40-41 Standard 40 Plastic 40 Spring Clip 41 Flexible 41 Packaging 42 E347880 For More Information Toll Free: 1 (888) 580-6366 Or Visit /contact-us/
2 E347880 For More Information Toll Free: 1 (888) 580-6366 Or Visit /contact-us/
Technical Specifications Light Dimension 0.45 x 1.14in (11.5x29mm) Output Red/Amber/Orange Green/Blue/White White (CRI90) LED Light Epistar SMD LED Chip Max Run Length* Single Feed 49.21ft (15m) 32.81ft (10m) 32.81ft (10m) Double Feed 98.43ft (30m) 65.62ft (20m) 65.62ft (20m) Light Surface Round profile 270 Lumen Maintenance 70,000 Hours L70 @ 25 C : 90,000 L50 @ 25 C 50,000 Hours L70 @ 50 C : 70,000 Hours L50 @ 50 C Electrical Input Voltage 24V DC Power Consumption 2.19W/ft (7.2W/m) 3.66W/ft (12W/m) 3.66W/ft (12W/m) Physical LED Count 22 LEDs/ft (72 LEDs/m) LED Spacing 0.55in (13.89mm) Cutting Unit Length 4.92in (125mm) 3.28in (83.3mm) 3.28in (83.3mm) (9 LEDs) (6 LEDs) (6 LEDs) Thermal Management Free air convection Fixture Connections End, side & bottom lead wires Minimum Bend Diameter 4.72in (120mm) (Side Bending) Temperature Ranges Installation 32 F to 140 F (0 C to 60 C) Operating -13 F to 140 F (-25 C to 60 C) Humidity 0-95% non condensing Dependability Warranty Limited 5 Year Safety Certification IP Rating Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant. IP68 with appropriately rated accessories *Max Run Length: Unless otherwise stated, snap and seamless run lengths are the same. 3
Technical Specifications Light Dimension 0.45 x 1.14in (11.5x29mm) Output White LED Light Nichia SMD LED Chip Max Run Length* Single Feed 32.81ft (10m) Double Feed 65.62ft (20m) Light Surface Round profile 270 Lumen Maintenance 70,000 Hours L70 @ 25 C : 90,000 L50 @ 25 C 50,000 Hours L70 @ 50 C : 70,000 Hours L50 @ 50 C Electrical Input Voltage 24V DC Power Consumption 3.66W/ft (12W/m) Physical LED Count 18 LEDs/ft (60 LEDs/m) LED Spacing 0.66in (16.67mm) Cutting Unit Length 3.94in (100mm) (6 LEDs) Thermal Management Free air convection Fixture Connections End, side & bottom lead wires Minimum Bend Diameter 4.72in (120mm) (Side Bending) Temperature Ranges Installation 32 F to 140 F (0 C to 60 C) Operating -13 F to 140 F (-25 C to 60 C) Humidity 0-95% non condensing Dependability Warranty Limited 5 Year Safety Certification IP Rating Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant. IP68 with appropriately rated accessories *Max Run Length: Unless otherwise stated, snap and seamless run lengths are the same. 4
Technical Specifications Epistar Available Colors Color CCT Wavelength Red 620-630nm Green 520-530nm Blue 465-475nm Amber 585-595nm Orange 600-610nm Pink 630-645nm 2200K 2238 ± 102K 2500K 2460 ± 120K 2700K (WW) 2725 ± 145K 3000K 3045 ± 175K 3500K (W) 3465 ± 245K 4000K 3985 ± 275K 4500K (CW) 4503 ± 243K 5000K 5029 ± 283K 5700K (DW) 5669 ± 355K 6500K 6532 ± 510K Lumen Count Color Per Foot Per Meter Power Red >42.67lm >140lm 2.19W/ft (7.2W/m) Green >85.34lm >280lm 3.66W/ft (12W/m) Blue >12.19lm >40lm 3.66W/ft (12W/m) Amber >42.67lm >140lm 2.19W/ft (7.2W/m) Orange >27.43lm >90lm 2.19W/ft (7.2W/m) Pink >45.72lm >150lm 3.66W/ft (12W/m) 2200K >103.63lm >340lm 3.66W/ft (12W/m) 2500K >103.63lm >340lm 3.66W/ft (12W/m) 2700K (WW) >103.63lm >340lm 3.66W/ft (12W/m) 3000K >103.63lm >340lm 3.66W/ft (12W/m) 3500K (W) >115.82lm >380lm 3.66W/ft (12W/m) 4000K >115.82lm >380lm 3.66W/ft (12W/m) 4500K (CW) >115.82lm >380lm 3.66W/ft (12W/m) 5000K >115.82lm >380lm 3.66W/ft (12W/m) 5700K (DW) >115.82lm >380lm 3.66W/ft (12W/m) 6500K >115.82lm >380lm 3.66W/ft (12W/m) *Color Jackets: For standard or custom color jacket options, contact your Account Manager. Min. order quantity of 656ft (200m). *Custom White Colors: For the following customs whites 2500K, 3500K, 4500K, 5000K and 6500K, the minimun order quantity is 200 meters. Nichia Available Colors Color CCT Wavelength 2200K 2238 ± 102K 2500K 2460 ± 120K 2700K (WW) 2725 ± 145K 3000K 3045 ± 175K 3500K (W) 3465 ± 245K 4000K 3985 ± 275K 4500K (CW) 4503 ± 243K 5000K 5029 ± 283K Lumen Count Color Per Foot Per Meter Power 2200K >103.63lm >340lm 3.66W/ft (12W/m) 2500K >103.63lm >340lm 3.66W/ft (12W/m) 2700K (WW) >103.63lm >340lm 3.66W/ft (12W/m) 3000K >103.63lm >340lm 3.66W/ft (12W/m) 3500K (W) >115.82lm >380lm 3.66W/ft (12W/m) 4000K >115.82lm >380lm 3.66W/ft (12W/m) 4500K (CW) >115.82lm >380lm 3.66W/ft (12W/m) 5000K >115.82lm >380lm 3.66W/ft (12W/m) 5
Testing Certifications Testing Organization Certificate Serial N Report Reference UL 2108 UL 20160726-E360029 E360029-2013 CE-EMC SGS SZEM1702001259LMV SZEM160600421302 Fixture Testing Optical Testing Spectrum Analysis Photometric Distribution Lumen Maintenance & Lifetime IES LM 79 (Lumen, CCT, CRI, XY, SDCM, wavelength) IES LM 73 (Lumen intensity distribution & Lux diagram) IES LM 84 & IES TM28 Temperature Testing Normal Temperature Test Abnormal Operation Test UL1598 & UL2388 & IEC60598-1 & IEC60598-2-21 UL1598 & UL2388 & IEC60598-1 & IEC60598-2-21 Durability Testing Bending Test Swing Test Tensile Test Twist Test Ball Impact IK07 IK08 Manufacturer-defined, 500 cycles UL2388, >750 cycles Manufacturer-defined, > the weight of light in max. connection length double feed Max connection length double feed Manufacturer-defined, >200 cycles UL1598 & UL2388 & IEC60598-1 & IEC60598-2-21 IEC62262 Environmental Testing Chlorinated Water Immersion BG9667, PH6.8-7.6, free chlorine 0.3-0.6mg/L Salt Water Immersion IEC60598-1, Sailinity 4% Salt Spray Test IEC68-2-11 Outdoor Exposure Manufacturer-defined Flame Resistance UV Exposure IPX5, IPX6, IPX7, IPX8 Temperature Shock Constant Temperature UL94 ASTMG 154, ISO 4892-3, UVA @ 340nm IEC60529 Manufacturer-defined, -40 C - 60 C (typical temperature range) Manufacturer-defined 6
Testing Photometric Data Red/Amber Green/Blue/White White (CRI90) LED Type SMD SMD SMD Beam Angle 270 270 270 Color Wavelength Lumen/m Color CCT Lumen/m CCT Lumen/m Red 620-630nm >140lm 2500K 2460±120K >340lm 2460±120K >300lm Green 520-530nm >280lm 2700K 2725±145K >340lm 2725±145K >300lm Blue 465-475nm >40lm 3000K 3045±175K >340lm 3045±175K >300lm Amber 585-595nm >140lm 3500K 3465±245K >380lm 3465±245K >340lm Orange 585-595nm >90lm 4000K 3985±275K >380lm 3985±275K >340lm Pink 630-645nm >150lm 4500K 4503±243K >380lm 4503±243K >340lm 5000K 5029±283K >380lm 5028±283K >340lm 5700K 5669±355K >380lm 6500K 6532±510K >380lm 7
Testing Charts Current (ma) 500 450 400 350 300 250-25 -20-15 -10-5 0 10 15 20 25 30 35 40 45 50 55 60 Working Temperature vs. Current Temperature ( ) Lumen (lm) 540 480 420 360 300 240 180 1 2 3 47 5 69 8 10 Length (m) Luminous Flux vs. Length of Light Lumen (lm) 420 360 300 240 180 120 60-25 -20-15 -10-5 0 10 15 20 25 30 35 40 45 50 55 60 Luminous Flux vs. Working Temperature Temperature( ) 8
Testing Charts Current (ma) 500 450 400 350 300 250 200 0 24 68 10 12 14 16 18 20 22 24 26 28 30 Voltage vs. Current Voltage (V) Remark: Δ Δ 9
Testing Charts (X,Y) Chromaticity Diagram y 0.46 0.44 0.42 3000 K 3500 K 2700 K 2500 K 2200 K 0.40 0.38 4000 K 4500 K 5000 K 0.36 5700 K 0.34 6500 K 0.32 0.30 0.28 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52 x 520nm 530nm 540nm 550nm Red 510nm 560nm 570nm Green 500nm 580nm 590nm 600nm Blue 490nm 620nm 650nm 770nm 480nm 470nm 450nm 380nm 10
Testing Charts Loading Chart Power Supply Rated Power 35W 60W 75W 80W 100W 120W 150W 185W 240W 320W 2.19W/ft (7.2W/m) 9.84ft (3m) 19.69ft (6m) 24.61ft (7.5m) 26.25ft (8m) 32.81ft (10m) 39.37ft (12m) 49.21ft (15m) 59.06ft (18m) 78.74ft (24m) 98.43ft (30m) 3.66W/ft (12W/m) 6.56ft (2m) 11.48ft (3.5m) 14.76ft (4.5m) 16.4ft (5m) 19.69ft (6m) 22.97ft (7m) 32.81ft (10m) 39.37ft (12m) 45.93ft (14m) 65.62ft (20m) Lead Type Single Feed Double Feed Note: These are the max recommended run lengths based on power supply For example: It is recommended to use one 80W power supply for a single-fed run of 26.25ft (8m) at 2.19W/ft (7.2W/m), or for a single-fed run of 16.4ft (5m) at 3.66W/ft (12W/m). 11
12 E347880 For More Information Toll Free: 1 (888) 580-6366 Or Visit /contact-us/
Technical Specifications Light Dimension 0.45 x 1.14in (11.5x29mm) Output W/WW LED Light Epistar or Nichia SMD LED Chip Max Run Length* Single Feed 32.81ft (10m) Double Feed 65.62ft (20m) Light Surface Round profile 270 Lumen Maintenance 70,000 Hours L70 @ 25 C : 90,000 L50 @ 25 C 50,000 Hours L70 @ 50 C : 70,000 Hours L50 @ 50 C Electrical Input Voltage 24V DC Power Consumption 3.66W/ft (12W/m) Physical LED Count 44 LEDs/ft (144 LEDs/m) LED Spacing 0.55in (13.89mm) Cutting Unit Length 3.28in (83.3mm) (12 LEDs) Thermal Management Free air convection Fixture Connections End, side & bottom lead wires Minimum Bend Diameter 4.72in (120mm) (Side Bending) Temperature Ranges Installation 32 F to 140 F (0 C to 60 C) Operating -13 F to 140 F (-25 C to 60 C) Humidity 0-95% non condensing Dependability Warranty Limited 5 Year Safety Certification IP Rating Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant. IP68 with appropriately rated accessories *Max Run Length: Unless otherwise stated, snap and seamless run lengths are the same. 13
Technical Specifications Available Colors Color CCT Wavelength WW 2460 ± 120K W 5029 ± 283K W+WW 3465 ± 245K Lumen Count Color Per Foot Per Meter Power WW >39.62lm >130lm 1.83W/ft (6W/m) W >39.62lm >130lm 1.83W/ft (6W/m) W+WW >79.25lm >260lm 3.66W/ft (12W/m) Testing Photometric Data W+WW LED Type SMD Beam Angle 270 Color Wavelength Lumen/m W 2460 ± 120K >130lm WW 5029 ± 283K >130lm W+WW 3465 ± 245K >260lm 14
Testing Certifications Testing Organization Certificate Serial N Report Reference UL 2108 UL 20160726-E360029 E360029-2013 CE-EMC SGS SZEM1702001259LMV SZEM160600421302 Fixture Testing Optical Testing Spectrum Analysis Photometric Distribution Lumen Maintenance & Lifetime IES LM 79 (Lumen, CCT, CRI, XY, SDCM, wavelength) IES LM 73 (Lumen intensity distribution & Lux diagram) IES LM 84 & IES TM28 Temperature Testing Normal Temperature Test Abnormal Operation Test UL1598 & UL2388 & IEC60598-1 & IEC60598-2-21 UL1598 & UL2388 & IEC60598-1 & IEC60598-2-21 Durability Testing Bending Test Swing Test Tensile Test Twist Test Ball Impact IK07 IK08 Manufacturer-defined, 500 cycles UL2388, >750 cycles Manufacturer-defined, > the weight of light in max. connection length double feed Max connection length double feed Manufacturer-defined, >200 cycles UL1598 & UL2388 & IEC60598-1 & IEC60598-2-21 IEC62262 Environmental Testing Chlorinated Water Immersion BG9667, PH6.8-7.6, free chlorine 0.3-0.6mg/L Salt Water Immersion IEC60598-1, Sailinity 4% Salt Spray Test IEC68-2-11 Outdoor Exposure Manufacturer-defined Flame Resistance UV Exposure IPX5, IPX6, IPX7, IPX8 Temperature Shock Constant Temperature UL94 ASTMG 154, ISO 4892-3, UVA @ 340nm IEC60529 Manufacturer-defined, -40 C - 60 C (typical temperature range) Manufacturer-defined 15
Testing Charts Power (W) 12. 0 10. 0 (346 5± ) 8.0 6.0 4.0 2.0 (250 0± ) (5028± ) 0.0 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 Power vs. CCT Color Temperature (K) Flux (lm) 300. 0 250. 0 200. 0 (346 5± ) 150. 0 100. 0 (250 0± ) (5028± ) 50. 0 0.0 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 Luminous Flux vs. CCT Color Temperature (K) Current (ma) 600 500 400 300 200 100 0-25 -20-15 -10-5 0 10 15 20 25 30 35 40 45 50 55 60 Working Temperature vs. Current (Color Temperature in 3500K) Temperature ( ) 16
Testing Charts Voltage (V) 24.0 22.0 20.0 18.0 16.0 14.0 12.0 10.0 03 1 2 47 5 69 8 10 Working Voltage vs. Length of Light (Color Temperature in 3500K) Length (m) Remark: Δ Δ 17
Testing Charts (X,Y) Chromaticity Diagram y 0.46 0.44 0.42 3000 K 3500 K 2700 K 2500 K 2200 K 0.40 0.38 4000 K 4500 K 5000 K 0.36 5700 K 0.34 6500 K 0.32 0.30 0.28 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52 x 520nm 530nm 540nm 550nm Red 510nm 560nm 570nm Green 500nm 580nm 590nm 600nm Blue 490nm 620nm 650nm 770nm 480nm 470nm 450nm 380nm 18
Testing Charts Loading Chart Power Supply Rated Power 35W 60W 75W 80W 100W 120W 150W 185W 240W 320W 3.66W/ft (12W/m) 6.56ft (2m) 11.48ft (3.5m) 14.76ft (4.5m) 16.4ft (5m) 19.69ft (6m) 22.97ft (7m) 32.81ft (10m) 39.37ft (12m) 45.93ft (14m) 65.62ft (20m) Lead Type Single Feed Double Feed Note: These are the max recommended run lengths based on power supply For example: It is recommended to use one 80W power supply for a single-fed run of 16.4ft (5m) at 3.66W/ft (12W/m). 19
Vivid S 270 Version Shown 20 E347880 For More Information Toll Free: 1 (888) 580-6366 Or Visit /contact-us/
Technical Specifications Light Dimension 0.45 x 1.14in (11.5x29mm) Output 270 LED Light Epistar or Nichia SMD LED Chip Max Run Length Single Feed Seamless: 22.97ft (7m) Snap: 32.81ft (10m) Double Feed Seamless: 45.93ft (14m) Snap: 65.62ft (20m) Light Surface Round profile 270 Lumen Maintenance 70,000 Hours L70 @ 25 C : 90,000 L50 @ 25 C 50,000 Hours L70 @ 50 C : 70,000 Hours L50 @ 50 C Electrical Input Voltage 24V DC Power Consumption 3.66W/ft (12W/m) Physical LED Count 18 LEDs/ft (60 LEDs/m) LED Spacing 0.66in (16.67mm) Cutting Unit Length 3.94in (100mm) (6 LEDs) Thermal Management Free air convection Fixture Connections End, side & bottom lead wires Minimum Bend Diameter 4.72in (120mm) (Side Bending) Temperature Ranges Installation 32 F to 140 F (0 C to 60 C) Operating -13 F to 140 F (-25 C to 60 C) Humidity 0-95% non condensing Dependability Warranty Limited 5 Year Safety Certification IP Rating Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant. IP68 with appropriately rated accessories 21
Technical Specifications Color Information Color CCT Wavelength Red 620-630nm Green 520-530nm Blue 465-475nm R+G+B (W) N/A Lumen Count Color Per Foot Per Meter Power Red >6.71lm >22lm 1.37W/ft (4.5W/m) Green >27.43lm >90lm 1.37W/ft (4.5W/m) Blue >5.49lm >18lm 1.37W/ft (4.5W/m) R+G+B (W) >39.62lm >130lm 3.66W/ft (12W/m) Testing Photometric Data RGB LED Type SMD Beam Angle 270 Color Wavelength Lumen/m Red 620-630nm >22lm Green 520-530nm >90lm Blue 465-475nm >18lm R+G+B (white) N/A >130lm 22
Testing Certifications Testing Organization Certificate Serial N Report Reference UL 2108 UL 20160726-E360029 E360029-2013 CE-EMC SGS SZEM1702001259LMV SZEM160600421302 Fixture Testing Optical Testing Spectrum Analysis Photometric Distribution Lumen Maintenance & Lifetime IES LM 79 (Lumen, CCT, CRI, XY, SDCM, wavelength) IES LM 73 (Lumen intensity distribution & Lux diagram) IES LM 84 & IES TM28 Temperature Testing Normal Temperature Test Abnormal Operation Test UL1598 & UL2388 & IEC60598-1 & IEC60598-2-21 UL1598 & UL2388 & IEC60598-1 & IEC60598-2-21 Durability Testing Bending Test Swing Test Tensile Test Twist Test Ball Impact IK07 IK08 Manufacturer-defined, 500 cycles UL2388, >750 cycles Manufacturer-defined, > the weight of light in max. connection length double feed Max connection length double feed Manufacturer-defined, >200 cycles UL1598 & UL2388 & IEC60598-1 & IEC60598-2-21 IEC62262 Environmental Testing Chlorinated Water Immersion BG9667, PH6.8-7.6, free chlorine 0.3-0.6mg/L Salt Water Immersion IEC60598-1, Sailinity 4% Salt Spray Test IEC68-2-11 Outdoor Exposure Manufacturer-defined Flame Resistance UV Exposure IPX5, IPX6, IPX7, IPX8 Temperature Shock Constant Temperature UL94 ASTMG 154, ISO 4892-3, UVA @ 340nm IEC60529 Manufacturer-defined, -40 C - 60 C (typical temperature range) Manufacturer-defined 23
Testing Charts Power (W) 12 11 10 9 8 7-25 -20-15 -10-5 0 10 15 20 25 30 35 40 45 50 55 60 Working Temperature vs. Power Temperature ) ) Lumen (lm) 160 140 120 100 80 60 40 20 1 2 3 47 5 69 8 10 Luminous Flux vs. Length of Light Lenght (m) Voltage (V) 24.0 22.0 20.0 18.0 16.0 14.0 12.0 10.0 03 1 2 47 5 69 8 10 Working Voltage vs. Length of Light Lenght (m) 24
Testing Charts Remark: Δ Δ 520nm 530nm 540nm 550nm Red 510nm 560nm 570nm Green 500nm 580nm 590nm 600nm Blue 490nm 620nm 650nm 770nm 480nm 470nm 450nm 380nm 25
Testing Charts Loading Chart Power Supply Rated Power 35W 60W 75W 80W 100W 120W 150W 185W 240W 320W 2.19W/ft (7.2W/m) 9.84ft (3m) 19.69ft (6m) 24.61ft (7.5m) 26.25ft (8m) 32.81ft (10m) 39.37ft (12m) 49.21ft (15m) 59.06ft (18m) 78.74ft (24m) 98.43ft (30m) 3.66W/ft (12W/m) 6.56ft (2m) 11.48ft (3.5m) 14.76ft (4.5m) 16.4ft (5m) 19.69ft (6m) 22.97ft (7m) 32.81ft (10m) 39.37ft (12m) 45.93ft (14m) 65.62ft (20m) Lead Type Single Feed Double Feed Note: These are the max recommended run lengths based on power supply For example: It is recommended to use one 80W power supply for a single-fed run of 26.25ft (8m) at 2.19W/ft (7.2W/m), or for a single-fed run of 16.4ft (5m) at 3.66W/ft (12W/m). 26
Vivid S 160 Version Shown 27 E347880 For More Information Toll Free: 1 (888) 580-6366 Or Visit /contact-us/
Technical Specifications Light Dimension 0.45 x 1.14in (11.5x29mm) Output RGB Single Color RGBW W+WW LED Light Epistar SMD LED Chip Max Run Length * 1 * 2 Single Feed (Dynamic) 49.21ft (15m) 49.21ft (15m) 32.81ft (10m) 49.21ft (15m) Single Feed (Full Load) 32.81ft (10m) 32.81ft (10m) 16.4ft (5m) 32.81ft (10m) Double Feed (Dynamic) 98.43ft (30m) 98.43ft (30m) 65.62ft (20m) 98.43ft (30m) Double Feed (Full Load) 65.62ft (20m) 65.62ft (20m) 32.81ft (10m) 65.62ft (20m) Light Surface Round profile 270 Lumen Maintenance 70,000 Hours L70 @ 25 C : 90,000 L50 @ 25 C 50,000 Hours L70 @ 50 C : 70,000 Hours L50 @ 50 C Electrical Input Voltage 24V DC Power Consumption 3.66W/ft (12W/m) 3.66W/ft (12W/m) 4.57W/ft (15W/m) 3.66W/ft (12W/m) Physical LED Count 17 LED/ft 17 LED/ft 17 LED/ft 18 + 18 LEDs/ft (56 LEDs/m) (56 LEDs/m) (56 LEDs/m) (60 + 60 LEDs/m) LED Spacing 0.7in (17.8mm) 0.7in (17.8mm) 0.7in (17.8mm) 0.66in (16.7mm) Cutting Unit Length 4.92in (125mm) 4.92in (125mm) 4.92in (125mm) 3.94in (100mm) (7 LEDs) (7 LEDs) (7 LEDs) (6 + 6 LEDs) IC Type UCS2903 UCS2903 UCS2904 UCS2903 Thermal Management Free air convection Fixture Connections End, side & bottom lead wires Minimum Bend Diameter 4.72in (120mm) (Side Bending) Temperature Ranges Installation 32 F to 140 F (0 C to 60 C) Operating -13 F to 140 F (-25 C to 60 C) Humidity 0-95% non condensing Dependability Warranty Limited 5 Year Safety Certification IP Rating Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant. IP68 with appropriately rated accessories * 1 Max Run Length: Dynamic = when the R, G, B channels are not operating at 100% Full Load = when the R, G, B channels are operating at 100% * 2 Max Run Length: Unless otherwise stated, snap and seamless run lengths are the same. 28
Technical Specifications Available Colors Color CCT Wavelength Red 620-630nm Green 520-530nm Blue 465-475nm Amber 585-595nm 2700K (WW) 2725 ± 145K 3000K 3045 ± 175K 3500K (W) 3465 ± 245K 4000K 3985 ± 275K 4500K (CW) 4503 ± 243K 5000K 5029 ± 283K 5700K (DW) 5669 ± 355K 6500K 6532 ± 510K Lumen Count Color Per Foot Per Meter Power Red >6.71lm >22lm - Green >27.43lm >90lm - Blue >5.49lm >18lm - R+G+B (white) >39.62lm >130lm 3.66W/ft (12W/m) Testing Photometric Data LED Type SMD Beam Angle 270 Color Wavelength Color CCT Red 620-630nm 2700K 2725±145K Green 520-530nm 3000K 3045±175K Blue 465-475nm 3500K 3465±245K Amber 585-595nm 4000K 3985±275K 4500K 4503±243K 5000K 5029±283K 5700K 5669±355K 6500K 6532±510K 29
Testing Certifications Testing Organization Certificate Serial N Report Reference UL 2108 UL 20160726-E360029 E360029-2013 CE-EMC SGS SZEM1702001259LMV SZEM160600421302 Fixture Testing Optical Testing Spectrum Analysis Photometric Distribution Lumen Maintenance & Lifetime IES LM 79 (Lumen, CCT, CRI, XY, SDCM, wavelength) IES LM 73 (Lumen intensity distribution & Lux diagram) IES LM 84 & IES TM28 Temperature Testing Normal Temperature Test Abnormal Operation Test UL1598 & UL2388 & IEC60598-1 & IEC60598-2-21 UL1598 & UL2388 & IEC60598-1 & IEC60598-2-21 Durability Testing Bending Test Swing Test Tensile Test Twist Test Ball Impact IK07 IK08 Manufacturer-defined, 500 cycles UL2388, >750 cycles Manufacturer-defined, > the weight of light in max. connection length double feed Max connection length double feed Manufacturer-defined, >200 cycles UL1598 & UL2388 & IEC60598-1 & IEC60598-2-21 IEC62262 Environmental Testing Chlorinated Water Immersion BG9667, PH6.8-7.6, free chlorine 0.3-0.6mg/L Salt Water Immersion IEC60598-1, Sailinity 4% Salt Spray Test IEC68-2-11 Outdoor Exposure Manufacturer-defined Flame Resistance UV Exposure IPX5, IPX6, IPX7, IPX8 Temperature Shock Constant Temperature UL94 ASTMG 154, ISO 4892-3, UVA @ 340nm IEC60529 Manufacturer-defined, -40 C - 60 C (typical temperature range) Manufacturer-defined 30
Testing Charts Remark: Δ Δ y 0.46 0.44 0.42 0.40 0.38 0.36 0.34 0.32 3000 K 3500 K 4000 K 4500 K 5000 K 5700 K 6500 K 2500 K 2200 K 2700 K 0.30 0.28 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 0.52 x 31
Testing Charts 520nm 530nm 540nm 550nm Red 510nm 560nm 570nm Green 500nm 580nm 590nm 600nm Blue 490nm 620nm 650nm 770nm 480nm 470nm 450nm 380nm Loading Chart Power Supply Rated Power 35W 60W 75W 80W 100W 120W 150W 185W 240W 320W 2.19W/ft (7.2W/m) 9.84ft (3m) 19.69ft (6m) 24.61ft (7.5m) 26.25ft (8m) 32.81ft (10m) 39.37ft (12m) 49.21ft (15m) 59.06ft (18m) 78.74ft (24m) 98.43ft (30m) 3.66W/ft (12W/m) 6.56ft (2m) 11.48ft (3.5m) 14.76ft (4.5m) 16.4ft (5m) 19.69ft (6m) 22.97ft (7m) 32.81ft (10m) 39.37ft (12m) 45.93ft (14m) 65.62ft (20m) Lead Type Single Feed Double Feed Note: These are the max recommended run lengths based on power supply For example: It is recommended to use one 80W power supply for a single-fed run of 26.25ft (8m) at 2.19W/ft (7.2W/m), or for a single-fed run of 16.4ft (5m) at 3.66W/ft (12W/m). 32
Physical Specifications 5 Year 270 D:120mm 5 Year Light Profile Bending Direction 29 mm 1.14 inch 270 Round 11.5 mm 0.45 inch Side Bending Minimum Bending Diameter Light Emitting Surface 120 mm 4.72 inch 01 02 01 02 01 02 Light Emitting Surface 01 02 33
Part Number Naming Convention NF-11D-1-01-XW-X-XXX-XXXX Voltage (4 digits) LED Color (3 digits) LED Type (1 digit) Functionality (2 digits) Light Emitting Sides (2 digits) Bending Direction (1 digit) Profile (3 digits) Product Line (2 digits) For full part number naming rules, please refer to the document on www.glls.com/support/documentation/ 34
Connectors IP67: Rated for wet locations, not submersion. Factory Assembly only. Seamless Connectors Seamless End Exit NA-11D-1-01-XW-SE-0-EN-XXX-P 16mm 11mm 5mm 12mm 16mm 11.5mm 2mm 29mm 29mm 11.5mm Seamless Side Exit NA-11D-1-01-XW-SE-1-SR-XXX-P NA-11D-1-01-XW-SE-2-SL-XXX-P 16mm 11.5mm 12mm 2mm 29mm 13.5mm 11mm 14mm Seamless Bottom Exit NA-11D-1-01-XW-SE-0-BO-XXX-P 16mm 11.5mm 2mm 14mm 42mm 31mm 2mm 12mm Seamless End Cap NA-11D-1-01-XW-SE-0-EC Seamless Jumper NA-11D-1-01-XW-SE-0-EJ-XXX-P 35
Connectors IP68: Submersible. Waiting on 3rd party certification from UL as of 18/04/12. Factory Assembly only. Submersible Seamless Connectors Submersible End Exit NA-11D-1-01-XW-SU-0-EN-XXX-P 22mm 10mm 3mm 15mm 2mm 35mm 4mm 20mm 15.5mm 33mm 34mm 2mm 18mm 20mm 50mm Submersible Side Exit NA-11D-1-01-XW-SU-1-SR-XXX-P NA-11D-1-01-XW-SU-2-SL-XXX-P 20mm 15mm 4mm 42mm 33mm 2mm2 2mm 17.5mm 20mm 27mm Submersible Bottom Exit NA-11D-1-01-XW-SU-0-BO-XXX-P 20mm 15.5mm 4mm 42mm 20mm 35mm 35mm 15mm 2mm 2mm 27mm Submersible End Cap NA-11D-1-01-XW-SU-0-EC Submersible Jumper NA-11D-1-01-XW-SU-0-EJ-XXX-P 36
Connectors IP67: Rated for outdoor use. Factory Assembly or DIY. Snap Connectors Snap End Exit 21.5mm NA-11D-1-01-XW-SC-1-EN-XXX-P NA-11D-1-01-XW-SC-2-EN-XXX-P 36mm 19.5m m 50.5mm 19.5m m 46.5m m Snap Side Exit NA-11D-1-01-XW-SC-1-SL-XXX-P NA-11D-1-01-XW-SC-2-SL-XXX-P NA-11D-1-01-XW-SC-1-SR-XXX-P NA-11D-1-01-XW-SC-2-SR-XXX-P 21.5mm RL 36mm 30mm 57mm Snap Bottom Exit 21.5mm NA-11D-1-01-XW-SC-1-BO-XXX-P NA-11D-1-01-XW-SC-2-BO-XXX-P 30mm 57mm 36mm Snap End Cap NA-11D-1-01-XW-SC-1-EC NA-11D-1-01-XW-SC-2-EC 36m m 21.5m m 19.5mm 19.5m m 46.5mm 37
Connectors IP67: Rated for outdoor use. Factory Assembly or DIY. Snap Connectors Snap Jumper NA-11D-1-01-XW-SC-0-EJ-XXX-P L Snap Power T Feed NA-11D-1-01-XW-SC-0-TF-XXX-P L2 L1 50mm Swivel Connectors Swivel End Exit NA-11D-1-01-XW-SV-1-EN-XXX-P NA-11D-1-01-XW-SV-2-EN-XXX-P 30mm 16mm 12.5mm 32mm 40mm Swivel End Cap NA-11D-1-01-XW-SV-0-EC 16mm 30mm 13mm 32mm 40mm 38
Connectors IP20: Rated for indoor use only. Factory Assembly only. Barrel Connectors Barrel Connectors NA-XX-BC-DC-CXX-F NA-XX-BC-DC-CXX-M NA-XX-BN-XXA-CXX-F NA-XX-BN-XXA-CXX-M NA-XX-PL-XXA-CXX-F NA-XX-PL-XXA-CXX-M Anti-Wicking Ferrule 12m m 30m m Anvil Cutter Optional accessory for on-site cutting. *Factory order only* 39
Mounting Hardware Standard Anodized Aluminum Channel 22mm 13.8mm W x H Standard Length Part Number L1 L2 Screw Hole Φ Hole # 0.54 x 0.87in 1.38in (35mm) CL-11-R-AL-3C5-SD 0.69in (17.5mm) / Φ0.14in (3.5mm) 1 (13.8 x 22mm) 19.69in (500mm) CH-11-R-AL-0M5-SD 1.97in (50mm) 7.87in (200mm) Φ0.14in (3.5mm) 3 39.37in (1000mm) CH-11-R-AL-01M-SD 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) 5 78.74in (2000mm) CH-11-R-AL-02M-SD 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) 10 Plastic Channel L1 L2 W x H Standard Length Part Number L1 L2 Screw Hole Φ Hole # 0.55 x 0.94in 19.69in (500mm) CH-11-R-PL-0M5-SD 1.97in (50mm) 7.87in (200mm) Φ0.14in (3.5mm) 3 (14 x 24mm) 39.37in (1000mm) CH-11-R-PL-01M-SD 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) 5 78.74in (2000mm) CH-11-R-PL-02M-SD 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) 10 40
Mounting Hardware Spring Clip Anodized Aluminum Channel 25.6mm 16.2mm L1 L L2 3.5 3.5 L3 L4 W x H Standard Length Part Number L1 L2 L3 L4 Screw Hole Φ Hole # Clip # 0.64 x 1.01in 1.38in (35mm) CL-11-R-AL-3C5-SP 0.69in (17.5mm) / 0.2in (5mm) 0.98in (25mm) Φ0.14in (3.5mm) 2 1 (16.2 x 25.6mm) 19.69in (500mm) CH-11-R-AL-0M5-SP 0.98in (25mm) 8.86in (225mm) 1.97in (50mm) 7.87in (200mm) Φ0.14in (3.5mm) 3 3 39.37in (1000mm) CH-11-R-AL-01M-SP 0.98in (25mm) 9.35in (237.5mm) 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) 5 5 78.74in (2000mm) CH-11-R-AL-02M-SP 0.98in (25mm) 9.6in (243.8mm) 3.94in (100mm) 7.87in (200mm) Φ0.14in (3.5mm) 10 9 Stainless Steel Flexible Channel 0.4mm 10.7mm 24.5mm 13.2mm 4.76mm 4.76mm W x H Standard Length Part Number 0.52 x 0.97in 3.94in (100mm) CH-11-F-SS-0M1-SD (13.2 x 24.5mm) 11.81in (300mm) CH-11-F-SS-0M3-SD 19.69in (500mm) CH-11-F-SS-0M5-SD 35.43in (900mm) CH-11-F-SS-0M9-SD This profile can be mounted using screws in any gaps where the channel bends. 41
Packaging White Box Packing Box Fixture Length White Box Dimensions Packing Box Dimensions # Of White Boxes Package Weight 196.85in (5m) 15.35x2.05x19.67in (39x5.2x50cm) 20.47x16.14x11.02in (52x41x28cm) 5 30.86lbs (14kg) 393.7in (10m) 20.08x2.05x24.41in (51x5.2x62cm) 25.2x20.87x11.02in (64x53x28cm) 5 57.32lbs (26kg) 393.7in (10m) 20.08x2.05x24.41in (51x5.2x62cm) 25.2x20.87x6.9in (64x53x17.5cm) 3 35.27lbs (16kg) 787.4in (20m) 26.77x2.05x31.1in (68x5.2x79cm) 31.9x27.56x4.92in (81x70x12.5cm) 2 48.5lbs (22kg) 42