Pumps for Life
Who we are? Modern brand on the field of CMP production Czech engineering company Full technical knowledge of canned motor pump technology Joint venture - 2 partners, Czech Republic factory + China factory
1) Major shareholder European part Czech Republic pump assembling from quality checked components, testing procedures, ITP procedures, documentation creation, service cooperation with a strong company RENETRA use of experience, backgrounds, workshops, spare parts warehouses, testing technologies
2) Minor shareholder Asia China strong investor, modern workshop occupies an area of one hundred thousand square meters, the total investment of 40,000,000 EUR ability of producing one million CMPs / year a manufacturing factory uses Japanese know-how production of quality components with optimised production costs
Benefits for our partners: Inclusion of unique technology - interesting product in your portfolio Competitive price - reduced manufacturing costs and lead time European quality Full technical support from Central Europe (minimal communication and logistical problems due to our location) Flexibility, quick responsiveness
HERMAG s Mission: Creating a network of distributors across Europe, each covering specific areas Building well known brand, a global leader in European and Russian market Extending the application of CMPs and redefining the market (replacement of conventional pumps and magnetic pumps)
Canned Motor Pump Advantages: No leakage No shaft seal No lubrication Compact design Low noise and vibration
Advantages of CMPs: easy operation easy maintenance low installation cost secondary containment -> safety only 2 slide bearings simple construction -> more reliable compact design electronic bearing monitor for bearing wear detection very low sound level
General parameters of HERMAG CMPs: Flow rate up to 650 m 3 /h Head up to 600 m Power max 315 kw (limit for a low voltage motor) Design pressure up to 42 MPa Temperature from 120 C up to + 450 C Viscosity up to 200 cp Solids contents up to 30% concentration, 0.5 mm diameters ATEX 2014/34/EU (Ex II 2 G Ex d IIC T4) 2 production lines: ISO2858 and API 685
Main cooling and lubrication paths 3 circuits
Standard Design Products Universally applied to wider CH Widely used, basic design Hollow shaft circulation Up to 15 kw ATEX 2014/34/EU certified CE Basic design, larger power External circulation Over 15 kw ATEX 2014/34/EU certified applications from corrosive to non-corrosive, vacuum to high pressure & low to moderate temperature Applications: BTX, Acetone, Acrylic acid, Amine, Buthanol, Ethylene Glycol, Methanol, Nitric Acid, Caustic Soda, Styrene monomer, Sulfuric acid, Water, etc.
High Vapor Pressure Volatile Design Products CR CRV The safest and most reliable centrifugal pumps for High vapor pressure volatile liquids and liquefied gases Applications: Butane, Ethane, Methane, NH3, LPG, LNG, L-CO2, L-Chlorine, L-N2, Ethylene Oxide, Propylene Oxide, Pentane, Reverse pipe circulation Vertical reverse circulation Freon, Hydrogen Fluoride, VCM, etc. ATEX 2014/34/EU certified
High Temperature Design CMP eliminate seal leakage, seal and CT Motor thermally separated With heat exchanger Up to 450 C Also vertical construction CI Ceramics insulated motor No cooling required Up to 400 C Also vertical construction coupling de-alignment and other problems due to thermal stresses and shocks, no bearings impact Applications: Dowtherm A, Frequent hot batch, Hydrocarbon reflux, Hot water, Hot water/oil Boiler circulation, Silicone oil, Syltherms, Therminols, etc. ATEX 2014/34/EU certified
High Melting Point Design Products CM With full heating jacket Hollow shaft circulation Up to 120 C Also vertical construction CMI High melting point liquid Ceramics insulated motor Up to 400 C Also vertical construction Full heating jacket CMP for high melting point liquids Applications: Anhydride, Bisphenol A, Fatty acid, Naphthalene, Maleic acid, Phenols, Phthalic anhydride, etc. ATEX 2014/34/EU certified
High Pressure Applications CEM CRM Back to back impeller design External pipe circulation Head up to 600 m ATEX 2014/34/EU certified Also vertical construction Back to back impeller design Reverse pipe circulation Head up to 600 m ATEX 2014/34/EU certified Also vertical construction
Slurry Handling Applications CS CSG The only authentic slurry pump for CPI ( Chemical process Industry) with Slurry handling Solids up to 3% and Ø 0.1 mm With inner seal point Gas seal slurry handling Solids up to 30%, Ø 0.5 mm Inner seal point and gas seal chamber sealless features Applications : EG (Ethylene Glycol) + Phenol, EG+Olygomer, TiO2 (Titanium Dioxide), CCI4 (Carbon Tetrachloride), Pigments, Filter press, Edible oil+ Catalyst, EG+TiO2, Acrylic Acid, Sugar Solution, Milk Amin Slurry, Chlorosilane MMA and MAA ATEX 2014/34/EU certified
Special Applications CP CEV Self priming type Hollow shaft circulation ATEX 2014/34/EU certified High design pressure max. 42 MPa Also nuclear application ATEX 2014/34/EU certified
ISO2858 API685 ISO 2858 dimensions European style design Flexibility in design Custom-made solutions
After-Sales Service: Maintenance and repairs Fast spare parts delivery Technical consultancy and training Pump commissioning and startup Comprehensive long-term support
Modern Test Facility: Power up to 1.6 MW Flow rates up to 11000 m 3 /h Pressures up to 60 bar Conformity with ČSN EN ISO 9906 Modern, automated data capturing
Monitoring Equipment: HPB Meter Radial wear of bearings Direction of rotation Dry run protection Switch off when current gets too low Thermal protection Bimetallic thermal switch, PT100 or PTC thermocouple Vibration sensor
Certificates: ATEX 94/9/EC Explosion proof design ČSN EN ISO 9001 High quality of products
Some References: Deza a.s., Czech Republic - multistage H=414 m Q=25 m 3 /h Liquid: Benzol
Some References: Energochem a.s., Czech Republic (EPC) API685 H=33,5 m Q=56 m 3 /h Liquid: Wasted Oil
Some References: Mochovce, Slovakia (nuclear plant) H=26-66 m Q=8-380 m 3 /h Liquid: Boric Acid 36 pump units
Some References: OOO Paritet, Russia H=30-45 m Q=3-50 m 3 /h Temperature: 160 C 9 pump units
Contact Details: Address: HERMAG pumps a.s. Železniční 548/4B 779 00 Olomouc, Czech Republic Phone number: +420 581 112 070 Email: jurasek@hermagpumps.com Web: www.hermagpumps.com