III-1784-17 Final Agenda of the Commission III Intermediate Meeting 2017 07.02.2017 COMMISSION III RESISTANCE WELDING, SOLID STATE WELDING AND ALLIED JOINING PROCESSES III-1784-17 FINAL AGENDA OF THE COMMISSION III INTERMEDIATE MEETING 2017 Authors: István Borhy, Péter Wikhardt and Jorge F. dos Santos Notes: [Notes]
FINAL AGENDA OF THE COMMISSION III INTERMEDIATE MEETING 2017 1. Introduction The Intermediate Meeting 2017 of the Commission III will be organised by the Hungarian Welding Society (Committee of Resistance Welding, Solid State Welding and Allied Joining Processes) and University of Miskolc (Institute of Materials Science and Technology, Faculty of Mechanical Engineering and Informatics). Contact: WIKHARDT, Péter Mobile: +36 30 835 04 65 E-Mail: peter.wikhardt@hu.tuv.com Tel: +36 1 461 12 44 Fax: +36 1 461 11 99 2. Monday 6 th February 2017 13:00 14:00 14:00 14:30 Registration (A/4 Building, Ground floor 44.) Welcome by the Chairman, J. F. dos Santos Organisational Matters Welcome by the University of Miskolc, L. Kovács vice dean responsible for international affairs Plenary Session Sub-Commission III-B Presentations Sub-Commission III-B Friction Based Processes Monday, 6 th February 2017 14:30 15:00 15:00 15:30 15:30 16:00 Mechanical properties and microstructural characteristics of friction-spot welded Al-Cu dissimilar joints, by J. Shen, M. E. B. Cardillo, J. F. dos Santos Friction Spot Welding of Al Alloys to High Strength Steels, by U. Suhuddin, V. Fischer and J. F. dos Santos Application of hybrid friction stir channeling (HybridFSC) technique to improve the cooling efficiency of electronic components, H. Karvinen, D. Nordal, P. Vilaça (Finland) III-1785-17 III-1786-17 III-1799-17
16:00 16:30 Coffee Break 16:30 17:00 Servo-controlled projection welding of vehicular air-condition control III-1788-17 valve, by H. S. Chang (South Korea) 17:00 17:30 Resistance welding inverter power sources application in Hungary, by Cs. Kovács, L. Tóth, Zs. Podráczky III-1789-17 (Hungary) 17:30 18:00 Transient softening at the fusion boundary in resistance spot welded ultra high strengths steel 22MNB5 and its impact on fracture processes, III-1791-17 by O. Sherepenko, S. Jüttner 19:00 Hungarian Evening (Rákóczi Pince / H-3530 Miskolc, Rákóczi Ferenc u. 23.) 3. Tuesday, 7 th February 2017 08:30 09:00 Pick-up at the Hotels Plenary Session Sub-Commission III-A Presentations Sub-Commission III-A Resistance Welding Tuesday, 7 th February 2017 09:00 09:15 09:15 9:45 9:45 10:15 10:15 10:45 Presentation of the University of Miskolc, K. Jármai vice rector responsible for strategic affairs The use of force profiles to improve the weldability of 22MnB5 for automotive components, by N. Holtschke, S. Jüttner High cycle fatigue and fatigue crack propagation design curves for 5754-H22 and 6082-T6 aluminium alloys and their friction stir welded joints, by J. Lukács, Á. Meilinger, D. Pósalaky (Hungary) Simulation of resistance spot welding process for the aluminum alloys 5182 and 6016 taking into account the surface layer, by S. Heilmann, D. Köberlin, M. Merx, J. Müller, J. Zschetzshe, S. Ihlenfeldt, U. Füssel III-1790-17 III-1787-17 III-1792-17
10:45 11:00 Coffee Break 11:00 11:30 Development of Resistant Spot Welding Technology for Automotive Ferrite-Martensitic Dual-Phase Steels with Joint Application of III-1793-17 Finite Element Modelling and Experimental Research, by Z. Bézi, L. Prém (Hungary) 11:30 12:00 The possibility of using the resistance welding on the design and manufacturing of modern III-1795-17 railway passenger coach by I. Borhy, A. Erdei, (Hungary) 12:00 13:00 Lunch 13:00 13:30 Life-time increase of resistance spot welding electrodes by using wear-dependent milling intervals and dispersion hardened copper, by D. Köberlin, C. Mathiszik, O. III-1797-17 Sherepenko, S. Heilmann, J. Zschetzshe, S. Jüttner, U. Füssel 13:30 14:00 Influencing factors for NDT of spot welds by imaging analysis of the residual flux density, by C. III-1798-17 Mathiszik, D. Köberlin, J. Zschetzshe, U. Füssel 14:00 14:30 Heat development of the contact area during capacitor discharge welding, by M.-M. Ketzel, J. III-1796-17 Zschetzshe 14:30 15:00 Results of Resistance Spot Welding of Dual Phase Steels, by B. III-1794-17 Palotás, T. Pogonyi (Hungary) 15:00 15:30 Closure of the Meeting, J.F. dos Santos 15:30 16:00 Coffee Break 16:00 18:00 Visit University of Miskolc (Institute of Materials Science and Technology)
4. Transportation From Budapest to Miskolc 1.) by Intercity Train: from Budapest Keleti Railway Station (on every hour); Information: www.elvira.hu; 2.) by Shuttle Bus (Information on the Internet (for example: http://www.civistranszfer.hu/en)) 3.) by Rent a Car on highway M0-M3-M30; From Hotel to University: A shuttle service will be offered from the Hotels to University and back to the hotels on the 6 th, 7 th and 8 th February. 5. Hotels We recommend the following hotels in Miskolc: Hotel Address Contact Room price (approx. / with breakfast) City Hotel Miskolc **** H-3527 Miskolc, Csabai kapu u. 8. recepcio@cityhotelmiskolc.hu www.cityhotelmiskolc.hu from 75 Tel: +36-46/555-100 Lévay Villa Hotel H-3527 Miskolc, levayvilla@t-online.hu from 65 **** Lévay u. 13. www.levayvilla.hu Tel: +36-46/500-890 Bástya Hotel H-3519 Miskolc, bastyahotel@t-online.hu from 40 *** Miskolctapolcai u. 1. www.bastyawellnesshotel.hu Tel: +36-46/561-590