TRITEC light Steel Panel Formwork Perfection made in Germany
Various practical illustrations of TRITEC Panel Combinations Guaranteed the largest possible range of sizes with the least possible amount of panels Reduced storage space on building sites Increased amount of castings per element, Various combinations reducing costs Reduced costs for through varied combinations for every ground plan Easy and practical stacking of panels for storage or transport Easy and effective solutions for slanted panels at various heights, wall offsets, length adjustments,corners...etc. 2
Design and Features (Properties) of the TRITEC light-system 1 6 3 9 Can be moved without the use of any cranes the panels can be moved by hand due to their light weight The formwork system with only one formwork clamp - Alignment Panel Coupler APC Compatible with the TRITEC Formwork System (80KN) Multi-purpose and versatile Ideal panel formwork for reinforced concrete walls System with 4 different panel heights and widths Well-defined grids for various wall lengths Vibration resistant and aligned at connection joints with the Alignment Panel Coupler APC Used with few additional parts for quick and easy handling with minimum storage needed Developed, produced and tested according to German standards 7 8 2 3
10 4 11 12 5 4
System Overview 1 2 3 Formwork Clamp APC, Art.-No. 060040 Formwork Clamp APC light, Art.-No. 060041 Scaffolding Bracket TTW 80, Art.-No. 060010 4 5 6 7 8 9 10 11 12 Scaffolding Bracket TTW 120, Art.-No. 060011 Compensation Waler TTR85, Art.No. 060030 Tie Rod (Available in all lengths) Base Plate PPS, painted, Art. No. 060091 Push Pull Props (Available in 3 sizes) Prop Connector TT, Art. No. 060060 Wing Nut Plate DW15, Art. No. 060100 Compensation Waler TTR85, Art.No. 060030 Stop End Tie light, Art. No. 060021 5
Steel Panel Formwork TRITEC light The System WALLS, COLUMNS, FOUNDATIONS ALL FORMED WITH ONE UNIVERSAL SYSTEM. Walls Columns Foundations TRITEC LIGHT THE ALL-PURPOSE SYSTEM FOR MANY APPLICATIONS SUCH AS: Wall formwork Foundations Column Formwork Shaft Formwork Beam Formwork Stop-end shuttering Wall conjunctions Inner Corners 75-285 Outer Corners 6
TRITEC light-panels ROBUST AND SOLID The formwork panel frame consists of special closed steel profiles combined with 18 mm cross-bonded Birch plywood. Your choice of any other plywood is possible. EASY TO HANDLE Due to the significantly small amount of components used, searching for many little components is unnecessary, storage is easy and delays on site are reduced to a minimum. MATERIAL SUITABLE FOR THE CONSTRUCTION SITE The steel panel frames have a profile height of 120 cm and a width of 60 mm. The Alignment Panel Coupler APC fits onto the corrugated edge without any difficulty. The frame is sturdy and the powder-coated surface is easily cleaned. The guard cover at panel top-ends protects the plywood against damage. The 18 mm film coated plywood consists of Birch veneer and is made to meet high demands. Cross-bonded and glued according to BFU 100 with a Phenol resin coating 220 g/m². Panels are available in 4 heights and 4 widths. Associated system accessories such as the Push-Pull Props, Walers, Walkway Brackets can be fastened to the integrated track. Corners are stiffened with steel plates. 90 cm 72 cm 60 cm 30 cm THE SYSTEM TRITEC LIGHT Consists of 4 panel widths Only one formwork clamp Superb weight to strength ratio up to 60kN/m² Multi-bonded Birch plywood, 220 g Longevity SERVICES Trade-in Financing Application technique Logistics 7
TRITEC light-panels Panels 300: Height Width Weight Article TRITEC -light Panel 300 cm 90 cm 105,04 kg 050050 TRITEC -light Panel 300 cm 72 cm 89,49 kg 050080 TRITEC -light Panel 300 cm 60 cm 80,18 kg 050060 TRITEC -light Panel 300 cm 30 cm 55,56 kg 050070 Panels 270: Height Width Weight Article TRITEC -light Panel 270 cm 90 cm 95,84 kg 050220 TRITEC -light Panel 270 cm 72 cm 81,48 kg 050230 TRITEC -light Panel 270 cm 60 cm 72,94 kg 050240 TRITEC -light Panel 270 cm 30 cm 50,32 kg 050250 Panels 150: Height Width Weight Article TRITEC -light Panel 150 cm 90 cm 59,30 kg 050320 TRITEC -light Panel 150 cm 72 cm 49,80 kg 050330 TRITEC -light Panel 150 cm 60 cm 44,50 kg 050340 TRITEC -light Panel 150 cm 30 cm 29,60 kg 050350 Panels 120: Height Width Weight Article TRITEC -light Panel 120 cm 90 cm 50,10 kg 050420 TRITEC -light Panel 120 cm 72 cm 41,80 kg 050430 TRITEC -light Panel 120 cm 60 cm 37,32 kg 050440 TRITEC -light Panel 120 cm 30 cm 24,42 kg 050450 8 All panels are also available as hot-dip galvanised-version.
Corner Panels INNER CORNER PANELS 90 Used to form 90 angles on inner corners of the concrete wall Powder-coated panels Height Width/Side Weight Article TRITEC light Inner Corner 300 300 cm 30 cm 86,14 kg 050093 TRITEC light Inner Corner 270 270 cm 30 cm 78,50 kg 030070 TRITEC light Inner Corner 150 150 cm 30 cm 44,90 kg 050370 TRITEC light Inner Corner 120 120 cm 30 cm 36,70 kg 040070 ARTICULATED CORNER For use in the case of oblique angles from 75-285, internally and externally Hinged corner panels can be made 30 cm panels Height Width/Side Weight Article TRITEC light Articulated Corner 300 300 cm 30 cm 90,40 kg 050095 TRITEC light Articulated Corner 270 270 cm 30 cm 81,80 kg 030090 TRITEC light Articulated Corner 150 150 cm 30 cm 47,10 kg 050390 TRITEC light Articulated Corner 120 120 cm 30 cm 38,20 kg 040090 SHAFT PANEL Used for forming lift shafts from the inside and manholes By means of a spindle, each leg of the corners contracts by 30 mm and the shaft unit can be easily stripped and lifted Height Width/Side Weight Article TRITEC light Shaft Panel 300 300 cm 30 cm 130,00 kg 010095 TRITEC light Shaft Panel 270 270 cm 30 cm 120,00 kg 030095 TRITEC light Shaft Panel 150 150 cm 30 cm 92,00 kg 080095 TRITEC light Shaft Panel 120 120 cm 30 cm 72,50 kg 040095 9
TRITEC light-accessories ALIGNMENT PANEL CLAMPS APC: Tightly fastens, aligns and makes panels flush with each other. FORMWORK CLAMP APC LIGHT, ART.-NO. 060041 Connects all light-panels easily and cost-efficiently FORMWORK CLAMP APC, ART.-NO. 060040 For the attachment of light outer corners or wall offsets up to 10 cm to connect the TRITEC light elements with TRITEC elements COMPENSATION WALER TTR85, ART. NO. 060030 Universally operational waler made of high-quality steel Bridges length extensions Increases rigidity of inter-panel connections Transfers tie forces The walers are fixed to the struts on the panels by means of its attached couplers which cannot be lost. The necessary functional holes have been integrated in the vertical and horizontal struts on the steel frame. High-quality powder-coating STOP-END-TIE, ART.-NO. 060021 To take the forces on the stop-end shuttering panels 10
TRITEC light-accessories LIFTING HOOK LIGHT, ART. NO. 060171 To transport the vertically hanging panels Certified carrying Load: 900 kg galvanised WALKWAY BRACKET TTW 80, ART. NO. 060010 For the assembly of a secure, 80 cm wide working platform Easily mounted to the vertical or horizontal struts High-quality powder-coating WALKWAY BRACKET TTW 120, ART. NO. 060011 For the assembly of a secure, 120 cm wide working platform Easily mounted to the vertical or horizontal struts High-quality powder-coating 11
TRITEC light-accessories PUSH-PULL PROPS Aids in erection Allows the simple alignment and adjustment of wall and column formwork Absorbs wind forces High-quality powder-coating Typ Extension Range Article Weight PPS I 2,05 to 2,95 m 060140 18,00 kg PPS II 2,91 to 3,80 m 060070 22,10 kg PPS III 4,60 to 6,00 m 060150 38,80 kg Kicker PPS I 1,08 to 1,40 m 060160 5,20 kg Kicker PPS II 1,28 to 1,90 m 060080 13,10 kg Kicker PPS III 2,05 to 2,94 m 060180 17,00 kg Kicker PPS I Kicker PPS II Kicker PPS III PANEL ERECTION WITH PUSH-PULL PROP PPS: Adjustment with Push Pull Prop and Prop Connector (Art. No. 060060) Adjustment by means of Push Pull Props 12
TRITEC light-accessories TIE RODS DW 15 Supplied in four standard lengths, additional lengths are available upon request Max. Permissible load of the Tie Rod DW 15 and DW 20, are according to DIN 18216 WING NUT PLATE DW 15 13
TRITEC light Flex-Panels TTF Only one panel for different usages. This minimizes the amount of different parts and allows mobility and fast assembly of panels. ECONOMIC DESIGN: Column Formwork Outer Corners Stop-end shuttering Wall connections Height Width Weight Article TRITEC light-ttf-panel 300 cm 72 cm 96,00 kg 050097 TRITEC light-ttf-panel 270 cm 72 cm 87,43 kg 050260 TRITEC light-ttf-panel 150 cm 72 cm 54,18 kg 050360 TRITEC light-ttf-panel 120 cm 72 cm 46,25 kg 050460 TRITEC LIGHT TTF-PANELS IN USE AS MULTI-PANELS Wall connections A Multi Panel with pre-drilled holes and a 3-hole grid at anchor level, can be delivered in any height. ECONOMIC DESIGN Outer corners Stopends Wall connections TTF-Panels Outer corner Stop-End-Tie Light Stopends 14
TRITEC LIGHT TTF-PANELS USED FOR COLUMN FORMWORK Lateral holes are drilled (when used as column formwork for cross sections with 50 mm increments) adjustable from 200x200 to 600x600 mm The panels are connected together by means of Tie Bolts and Wing Nut Pivot Plates. Unnecessary tie holes are sealed off with plugs. Examples Detail of fixing the TTF-Panels with column tie bolt 15
TRITEC light-foundations Foundations can be formed with panel heights of 120 and 150 with TRITEC light. Top tie bracket Foundation tie clamp tls 16
Special sizes, choice of color and plywood All TRITEC light elements can be custom made any special size upon request. For example GHI can make all TRITEC light elements to suit the colours in your logo powder coated and without extra charge! Select all standard RAL colours. Galvanized casing is available at an additional cost. TRITEC light colors TRITEC light galvanised You have the choice of four different plywood-versions. For a small fee you can get the panels with plastic coated plywood, with plastic board or with Sonoboard instead of the cross-bonded birch plywood. 17
PLANNING LOGISTICS SERVICE Prompt quotations and comprehensive advice CAD planning, production of formwork plans Swift, on-time, reliable delivery - worldwide We take complete charge of logistics and storage Training and instructions to your personnel on site Cleaning, maintenance and repairs using new original parts Contact/Manufacturer