Alsident System 75 Aluminium Product Information
System 75 - Aluminium - General Information Product Specification Product Description System 75 - Aluminium The System 75 Aluminium Extraction Arm from ALSIDENT SYSTEM features a wide range of jointed extraction arms made of anodized aluminium tubes with a diameter of 75 mm, joints of polypropylene and internal components of stainless steel. The joints make the arm easy to adjust and place in a working situation. System 75 Extraction Arms are available in three models for mounting on table, wall or ceiling. A wide range of hood designs allows this arm to cover various needs. An Extraction Arm from ALSIDENT SYSTEM consists of three parts: An extraction arm, a hood and a bracket. Each part must be ordered separately. The aluminium version of System 75 is suited for use in non-aggressive areas e.g. laboratories, hospitals, chemical industries, schools, and pharmaceutical industries and is available in various lengths with a maximum horizontal range of 1990 mm. Special length arms are available on request. GI 01
System 75 - Aluminium - General Information Product Specification Technical Specifications Recommended Airflow: Normal: 140 m 3 /h Minimum: 80 m 3 /h Maximum: 180 m 3 /h Air Temperature: Key to the signatures SYSTEM NO. 75 VERSION AL Aluminium -15 C - +90 C Material: Pipes: Anodized Aluminium Joints: Polypropylene (PP) - red or white O-rings: Polyethylene (PE) Mounting Flanges: Polypropylene (PP) - red or white Damper: Polypropylene (PP) Thumbscrew: Polypropylene (PP) - black Threaded Stay: Stainless Steel (acid-proof ) Spring 1) : Stainless Steel Gas spring 2) : Steel 3) 1) Extraction arms with ranges up to 75-9065 2) Available on model 75-9090 3) Also available in stainless steel on request CHAPTER GI TM WM CM General Information Table Mounted Wall Mounted Ceiling Mounted PAGE NO. 01 GI 02
System 75 - Aluminium - General Information Product Overview Table mounted Table mounted, 2-Joint Diam. L B C Indicative Part No. Colour of joint [mm] [mm] [mm] [mm] Weight [kg] Red White 75 550 350 450 1.5 75-35-1-4 -5 75 650 450 450 2.0 75-45-1-4 -5 75 750 550 450 2.3 75-55-1-4 -5 Table mounted, 3-Joint Diam. L A B C Indicative Part No. Colour of joint [mm] [mm] [mm] [mm] [mm] Weight [kg] Red White 75 830 350 350 450 1.9 75-3535-1-4 -5 75 1105 550 450 450 2.5 75-5545-1-4 -5 75 1290 650 550 450 2.7 75-6555-1-4 -5 75 1620 900 650 450 3.0 75-9065-1-4 -5 GI 03
System 75 - Aluminium - General Information Product Overview Wall mounted and Ceiling mounted Wall mounted, 3-Joint Diam. L A B C Indicative Part No. Colour of joint [mm] [mm] [mm] [mm] [mm] Weight [kg] Red White 75 795 350 350 450 2.0 75-3535-2-4 -5 75 1200 350 900 450 2.3 75-3590-2-4 -5 75 1060 550 450 450 2.6 75-5545-2-4 -5 75 1230 650 550 450 2.8 75-6555-2-4 -5 75 1550 900 650 450 3.1 75-9065-2-4 -5 75 1730 900 900 450 3.6 75-9090-2-4 -5 75 1990 900 900 450 3.8 75-9090-2-22* -4-5 *) With 2 external gas springs Ceiling mounted, 3-Joint Diam. L A B C Indicative Part No. Colour of joint [mm] [mm] [mm] [mm] [mm] Weight [kg] Red White 75 795 350 350 450 2.0 75-3535-3-4 -5 75 1200 350 900 450 2.3 75-3590-3-4 -5 75 1060 550 450 450 2.6 75-5545-3-4 -5 75 1230 650 550 450 2.8 75-6555-3-4 -5 75 1550 900 650 450 3.1 75-9065-3-4 -5 75 1730 900 900 450 3.6 75-9090-3-4 -5 75 1990 900 900 450 3.8 75-9090-3-22* -4-5 *) With 2 external gas springs GI 04
System 75 - Aluminium - General Information Accessories Overview Hoods Metal Hood (diam. 200 mm) Part No.: 1-7524-4 /-5 Metal hood made of white or red powder coated aluminium. Recommended when extracting hot gases, fumes, light dust concentrations etc. Material Metal hood: Aluminium (powder coated) Flange: Polypropylene (PP) Connection tube: Aluminium (Anodized) Part No. Red White 1-7524 -4-5 Metal Hood (diam. 200 mm) Part No.: 1-7524 Made of anodized aluminium with an aluminium flange. Recommended when extracting hot gases, fumes, light dust concentrations etc. Suitable for autoclaving. Material Metal Hood: Aluminium (Anodized) Flange: Aluminium (Anodized) Connection tube: Aluminium (Anodized) Suction Nozzle Part Nos.: 1-7525-4 /-5 Made of anodized aluminium and white or red polypropylene (PP). Recommended for concentrated sources of pollution. Often used at soldering processes. Material Hood: Aluminium (Anodized) and Polypropylene (PP) Flange: Polypropylene (PP) Connection tube: Aluminium (Anodized) Part No. Red White 1-7525 -4-5 GI 05
System 75 - Aluminium - General Information Accessories Overview Hoods Extractor Tube - Aluminium Part No.: 1-7525 Recommended for small concentrated sources of pollution. Efficient as it gets close to the source without obstructing the work process. Material Tube: Aluminium (Anodized) Extractor Tube - Alu + Polypropylene (PP) Part Nos.: 1-7526-4 /-5 Recommended for small concentrated sources of pollution. Efficient as it gets close to the source without obstructing the work process. Material Tube: Aluminium (Anodized) Tip: Polypropylene (PP) Part No. Red White 1-7526 -4-5 Dome Hood (diam. 280 mm) Part No.: 1-7528-4 /-5 Recommended for light fumes, gases and small open vessels. The transparent hood assists in keeping a good view of the workpiece. Material Hood: Flange: Connection tube*: PETG Polypropylene (PP) Aluminium (Anodized) *) Separately enclosed at delivery. Part No. Red White 1-7528 -4-5 GI 06
System 75 - Aluminium - General Information Accessories Overview Hoods Dome Hood (diam. 385 mm) Part No.: 1-7535-4 /-5 Recommended for light fumes, gases and open vessels. The transparent hood assists in keeping a good view of the workpiece. Material Hood: Flange: Connection tube*: *) Separately enclosed at delivery. PETG Polypropylene (PP) Aluminium (Anodized) Part No. Red White 1-7535 -4-5 Flat Screen (330 x 240 mm) Part Nos.: 1-753324-4 /-5 Recommended when extracting heavy gases and fumes. High efficiency when placed vertically on a surface e.g. a table. Gets close to the source without obstructing the work process. Material Hood: PETG Flange: Polypropylene (PP) Connection tube*: Aluminium (Anodized) *) Separately enclosed at delivery. Part No. Red White 1-753324 -4-5 Square Hood (420 x 320 mm) Part No.: 1-754232-4 /-5 Recommended for both light and heavy fumes, gases and open vessels. The transparent hood assists in keeping a good view of the workpiece. Good efficiency when placed vertically on a surface e.g. a table. Material Hood: PETG Flange: Polypropylene (PP) Connection tube*: Aluminium (Anodized) *) Separately enclosed at delivery. Part No. Red White 1-754232 -4-5 GI 07
System 75 - Aluminium - General Information Accessories Overview Brackets and Columns Wall Bracket Part No.: 2-7525 Used for System 75 Wall Mounted Extraction Arms. Wall bracket made of white powder coated steel. Other colours available on request. Table Bracket Part No.: 2-7510 Used to mount System 75 Table Mounted Extraction Arms on table side which makes it removable for mobile installations. Made of white powder coated steel. Other colours available on request. Reducers Part No.: 4-10075 / 4-8075 Used to connect System 75 Extraction Arms to duct. Made of white polypropylene (PP). Available in two sizes. Reducing from/to [mm] Part No. 80/75 4-8075 100/75 4-10075 GI 08
System 75 - Aluminium - General Information Accessories Overview Brackets and Columns Ceiling Columns Used for mounting the System 75 Ceiling Mounted Extraction Arms. The ceiling column is made of white powder coated steel. Available in two models with side connection or top connection to duct. Standard lengths see below. Available in other lengths and colours on request. Connection Diameter: 80 mm. Extensions for Ceiling Column Mounted on ceiling. Used to extend Ceiling Column in rooms with high ceilings. The Extension is made of white powder coated steel. Available in two standard lengths with side or top connection for duct. Other lengths and colours available on request. Connection Diameter: 80 mm. Length [mm] Ind. Weigth [kg] Top Conn. Side Conn. 250 2.0 2-250-20-500 3.0 2-500-20 2-500-80 750 3.8 2-750-20 2-750-80 1000 4.5 2-1000-20 2-1000-80 Length [mm] Ind.Weight [kg] Top Conn. Side Conn. 500 9.5 2-500-21-20 2-500-21-80 750 14.0 2-750-21-20 2-750-21-80 1000 18.0 2-1000-21-20 2-1000-21-80 GI 09
System 75 - Aluminium - General Information Technical Description C Sy ystem 75, Table mounted Pressure Drop Chart D System 75, Wall and Ceiling mounted C D GI 10
System 75 - Aluminium - General Information Spare Parts List Joint with Damper Joint with Damper 4-75-4 /-5 Pos. Pos. Part No. Red White Description A 1 4-7512 -4-5 Joint, 12 mm 1 2 4-755-0-4 -5 Joint, 5 mm 1 3 5-100-6 O-ring 1 4 5-75 Teflon Washer 2 5 5-75-5 Thumbscrew, 5 mm 2 6 5-75-5-221 Threaded Stay 1 7 5-75-4 Thumbscrew, 4 mm 2 8 5-5075 Wing for damper 1 9 800-4-75 Damper 1 9.1 5-12-411 Seegerring 1 A Product No. 4-75-4 /-5 4 5 6 7 2 3 9 1 7 8 9.1 4 5 [pieces applied] GI 11
System 75 - Aluminium - Table Mounted Working Area Table mounted with Extractor Tube Note: Working area of the arm is defined from the center of the opening of the accessory. When choosing the arm we recommend that the stationary working position of the accessory is not placed in the highest or lowest part of the working area. (All measurements in mm) TM 01
System 75 - Aluminium - Table Mounted Mounting Options Table Mounted Option Dimensions (All measurements in mm) Directly on Table. Socket pipe of a System 75 Extraction Arm mounted directly on table with flange screwed to table plate. Accessories: No brackets used. TM 02
System 75 - Aluminium - Table Mounted Mounting Options Table Mounted Option with Table Bracket Dimensions (All measurements in mm) With table bracket. Socket pipe of a System 75 Extraction Arm mounted on table side with a table bracket. Very functional option when impossible to mount directly on table or when a mobile installation is required. Accessories: Table Bracket, Part No. : 2-7510 TM 03
System 75 - Aluminium - Table Mounted Table Bracket Technical Description Part No.: 2-7510 Dimensions (All measurements in mm) Used to mount System 75 Table Mounted Arms on table side. Removable for mobile installations. Made of white powder coated steel. Other colours available on request. TM 04
System 75 - Aluminium - Table Mounted Spare Parts (A) 75-35-1 (B) 75-45-1 (C) 75-55-1 6 7 10 3 4 (D) 75-3535-1 (E) 75-5545-1 (F) 75-6555-1 (G) 75-9065-1 6 7 10 3 8 5 7 6 1 6 7 4 3 2 1 9 5 7 6 For spare parts list - see next page. 5 9 7 6 TM 05
System 75 - Aluminium - Table Mounted Spare Parts List Pos. Product No. Red White Joints A B C D E F G 75-35-1-4 -5 2-joint 75-45-1-4 -5 2-joint 75-55-1-4 -5 2-joint 75-3535-1-4 -5 3-joint 75-5545-1-4 -5 3-joint 75-6555-1-4 -5 3-joint 75-9065-1-4 -5 3-joint Pos. Part No. Description A B C D E F G [pieces applied] 1 3-7540-1-4 /-5 C-pipe BM 400 [pieces 1 applied] 1 1 1 1 1 1 2 5-75-2-4-01 Spring 4 mm (2 joint) 1 1 2 5-75-3-4-01 Spring 4 mm 1 2 5-75-3-5-01 Spring 5 mm 1 1 2 5-75-3-6-01 Spring 6 mm 1 3 5-100-6 O-ring 1 1 1 2 2 2 2 4 3-7535-9-4 /-5 B-pipe 350 1 1 4 3-7545-9-4 /-5 B-pipe 450 1 1 4 3-7555-9-4 /-5 B-pipe 550 1 1 4 3-7565-9-4 /-5 B-pipe 650 1 5 5-75-5-211 Threaded Stay 1 1 1 2 2 2 2 6 5-75-5 Thumbscrew 2 2 2 4 4 4 4 7 5-75 Teflon Washer 2 2 2 4 4 4 4 8 3-7535-8-4 /-5 A-pipe 350 1 8 3-7555-8-4 /-5 A-pipe 550 1 8 3-7565-8-4 /-5 A-pipe 650 1 8 3-7590-8-4 /-5 A-pipe 900 1 9 4-75-4 /-5 Joint with damper* 1 1 1 1 1 1 1 10 4-755-4 /-5 Joint 5 mm 1 1 1 1 1 1 1 *) Spare Parts List for Joint with Damper - see General Information. When ordering spare parts please quote: Product No. eg.: 75-55-1-5 (white) Description - B-pipe 550 Part No. - 3-7555-9-5 Quantity - 1 pc. If you wish to customize the arm with a spare part which is not a constituent part of the particular model, please contact your Alsident dealer. TM 06
System 75 - Aluminium - Table Mounted Mounting Instruction TM 07
System 75- Aluminium - Wall Mounted Working Area Wall Mounted with Extractor Tube Note: Working area of the arm is defined from the center of the opening of the accessory. When choosing the arm we recommend that the stationary working position of the accessory is not placed in the highest or lowest part of the working area. (All measurements in mm) WM 01
System 75- Aluminium - Wall Mounted Mounting Options Wall Mounted Option Dimensions (All measurements in mm) Wall Mounted System 75 Extraction Arm - wall mounted with Wall Bracket. Accessories: Wall Bracket, Part No.: 2-7525 WM 02
System 75- Aluminium - Wall Mounted Wall Bracket Technical Description Part No.: 2-7525 Dimensions (All measurements in mm) Used for System 75 Wall Mounted Extraction Arms. Wall bracket made of white powder coated steel. Other colours available on request. WM 03
System 75- Aluminium - Wall Mounted Spare Parts (A) 75-3535-2 (B) 75-3590-2 (C) 75-5545-2 (D) 75-6555-2 (E) 75-9065-2 (E) 75-9090-2 (G) 75-9090-2-22 7 8 7 8 5 4 10 1 2 4 6 8 9 8 6 7 10 5 7 8 4 3 9 3 7 8 1 4 For spare parts list - see next page. 7 6 8 7 6a 6a 6 8 WM 04 7
System 75- Aluminium - Wall Mounted Spare Parts List Pos. Product No. Red White Joints A B C D E F G 75-3535-2-4 -5 3-joint 75-3590-2-4 -5 3-joint 75-5545-2-4 -5 3-joint 75-6555-2-4 -5 3-joint 75-9065-2-4 -5 3-joint 75-9090-2-4 -5 3-joint 75-9090-2-22 -4-5 3-joint Pos. Part No. Description A B C D E F G 1 3-7540-2-4 /-5 C-pipe HM 400 [pieces applied] 1 1 1 1 1 1 1 2 5-75-3-4-00 Spring HM/HMS 4 mm 1 2 5-50-3-4,5-03 Spring HM/HMS 4.5 mm 1 2 5-75-3-5-00 Spring HM/HMS 5 mm 1 1 2 5-75-3-6-00 Spring HM/HMS 6 mm 1 1 2 5-75-2-4-01 Spring BM 4 mm 2-joints 1 3 800-100-100-1-050 Gas Spring 100N Push 1 3 800-100-200-2-050 Gas Spring 200N Pull 1 4 5-100-6 O-ring 2 2 2 2 2 2 2 5 3-7535-9-4 /-5 B-pipe 350 1 5 3-7545-9-4 /-5 B-pipe 450 1 5 3-7555-9-4 /-5 B-pipe 550 1 5 3-7565-9-4 /-5 B-pipe 650 1 5 3-7590-9-4 /-5 B-pipe 900 1 1 5 3-7590-0-9-4 /-5 B-pipe 900 gas spring 1 6 5-75-5-211 Threaded Stay 2 2 2 2 2 2 2 6a 5-75-8-112 Threaded Stay M5/M8 2 7 5-75-5 Thumbscrew 4 4 4 4 4 4 4 8 5-75 Washer 4 4 4 4 4 4 4 9 3-7535-8-4 /-5 A-pipe 350 1 1 9 3-7555-8-4 /-5 A-pipe 550 1 9 3-7565-8-4 /-5 A-pipe 650 1 9 3-7590-8-4 /-5 A-pipe 900 1 1 9 3-7590-0-8-4 /-5 A-pipe 900 gas spring 1 10 4-75-4 /-5 Joint with damper* 1 1 1 1 1 1 1 *) Spare Parts List for Joint with Damper - see General Information. When ordering spare parts please quote: Product No. eg.: 75-5545-2-5 (white) Description - B-pipe 450 Part No. - 3-7545-9-5 Quantity - 1 pc. [pieces applied] If you wish to customize the arm with a spare part which is not a constituent part of the particular model, please contact your Alsident dealer. WM 05
System 75- Aluminium - Wall Mounted Mounting Instruction WM 06
System 75 - Aluminium - Ceiling Mounted Working Area Ceiling Mounted with Extractor Tube N.B: When using the top part of the motion area be aware of the locationof the ceiling and the length of the ceiling column. Note: Working area of the arm is defined from the center of the opening of the accessory. When choosing the arm we recommend that the stationary working position of the accessory is not placed in the highest or lowest part of the working area. (All measurements in mm) CM 01
System 75 - Aluminium - Ceiling Mounted Mounting Options Ceiling Mounted Option Dimensions (All measurements in mm) A System 75 Extraction Arm ceiling mounted with ceiling column. Connection for ducting at the side or top. Accessories: Ceiling Column, Part No. depending on lengths. CM 02
System 75 - Aluminium - Ceiling Mounted Ceiling Column Technical Description Ceiling Columns Used for mounting the System 75 Ceiling Mounted Extraction Arms. The ceiling column is made of white powder coated steel. Available in two models with side connection or top connection to duct. Standarad lengths see below. Available in other lengths and colours on request. Length [mm] Ind. Weigth [kg] Top Conn. Side Conn. 250 2.0 2-250-20-500 3.0 2-500-20 2-500-80 750 3.8 2-750-20 2-750-80 1000 4.5 2-1000-20 2-1000-80 Dimensions (All measurements in mm) CM 03
System 75 - Aluminium - Ceiling Mounted Ceiling Column Technical Description Extensions for Ceiling Column Mounted on ceiling. For extending ceiling column in rooms with high ceilings. The extension for ceiling column is made of white powder coated steel. For standard lengths see below. Available in other lengths and colours on request. Length [mm] Ind.Weight [kg] Top Conn. Side Conn. 500 9.5 2-500-21-20 2-500-21-80 750 14.0 2-750-21-20 2-750-21-80 1000 18.0 2-1000-21-20 2-1000-21-80 Dimensions (All measurements in mm) CM 04
System 75 - Aluminium - Ceiling Mounted Spare Parts (A) 75-3535-3 (B) 75-3590-3 (C) 75-5545-3 (D) 75-6555-3 (E) 75-9065-3 (E) 75-9090-3 (G) 75-9090-3-22 7 8 7 8 1 2 4 10 5 7 4 9 5 4 For spare parts list - see next page. 6 9 10 6 8 7 8 7 6 8 7 3 3 7 8 1 4 6.a 6.a 6 8 7 CM 05
System 75 - Aluminium - Ceiling Mounted Spare Parts List Pos. Product No. Red White Joints A B C D E F G 75-3535-3-4 -5 3-joint 75-3590-3-4 -5 3-joint 75-5545-3-4 -5 3-joint 75-6555-3-4 -5 3-joint 75-9065-3-4 -5 3-joint 75-9090-3-4 -5 3-joint 75-9090-3-22 -4-5 3-joint Pos. Part No. Description A B C D E F G 1 3-7540-3-4 /-5 C-pipe HMS 400 1 1 1 1 1 1 1 2 5-75-3-4-00 Spring HM/HMS 4 mm 1 2 5-50-3-4,5-03 Spring HM/HMS 4.5 mm 1 2 5-75-3-5-00 Spring HM/HMS 5 mm 1 1 2 5-75-3-6-00 Spring HM/HMS 6 mm 1 1 2 5-75-2-4-01 Spring BM 4 mm 2-joints 1 3 800-100-100-1-050 Gas Spring 100N 1 3 800-100-200-2-050 Gas Spring 200N 1 4 5-100-6 O-ring 2 2 2 2 2 2 2 5 3-7535-9-4 /-5 B-pipe 350 1 5 3-7545-9-4 /-5 B-pipe 450 1 5 3-7555-9-4 /-5 B-pipe 550 1 5 3-7565-9-4 /-5 B-pipe 650 1 5 3-7590-9-4 /-5 B-pipe 900 1 1 5 3-7590-0-9-4 /-5 B-pipe 900 gas spring 1 6 5-75-5-211 Threaded Stay 2 2 2 2 2 2 2 6a 5-75-8-112 Threaded Stay M5/M8 2 7 5-75-5 Thumbscrew 4 4 4 4 4 4 4 8 5-75 Washer 4 4 4 4 4 4 4 9 3-7535-8-4 /-5 A-pipe 350 1 1 9 3-7555-8-4 /-5 A-pipe 550 1 9 3-7565-8-4 /-5 A-pipe 650 1 9 3-7590-8-4 /-5 A-pipe 900 1 1 9 3-7590-0-8-4 /-5 A-pipe 900 gas spring 1 10 4-75-4 /-5 Joint with damper* 1 1 1 1 1 1 1 *) Spare Parts List for Joint with Damper - see General Information. When ordering spare parts please quote: Product No. eg.: 75-3535-3-5 (white) Description - A-pipe 350 Part No. - 3-7535-8-5 Quantity - 1 pc. [pieces applied] If you wish to customize the arm with a spare part which is not a constituent part of the particular model, please contact your Alsident dealer. CM 06
System 75 - Aluminium - Ceiling Mounted Mounting Instruction CM 07