É Plaques extrudées Notre offre 2010 - PMMA 2012 Catalogue Altuglas International manufactures and markets PMMA acrylic sheet: Altuglas EX Altuglas EI with enhanced Impact Resistance.
The Altuglas EX and Altuglas EI portfolio includes the following ranges: Clear Opal White Black Impact Clear EI 25 Impact Clear EI 50 Impact Opal EI 50 Delivered by full pallets Option of special lengths to order (max 6200 mm) Single width available 2050 mm Focus on ranges in stock Palletisation by thickness - mm Our range of products in 050 x2050 mm Our reference 1.5 2.0 2.5 4 5 6 8 10 12 15 20 ALTUGLAS EX Clear 200 10000 80 60 50 40 0 25 20 15 12 10 8 6 FD Clear 227 10000-60 - 40 - - 200 27000-60 * 40 0 25 20 - - - - - OPAL 200 27005-60 * 40 0 - - - - - - - 200 27006 - - - 40 0 - - - - - - - 200 27007-60 * 40 0 25 - - - - - - 200 27008 * 60 * 40 0 * * - - - - - White 200 47001 - - - 40 0 25 - - - - - - Black 200 48000-60 * 40 0 25 20 15 12 - - - ALTUGLAS EI25 Clear 272 10000-60 * 40 0 - - - - - - - ALTUGLAS EI50 Clear 271 10000-60 * 40 0 25 20 * * - - - * make to order Page 2/6
Focus on extruded sheet on request Our range of products OPAL Our reference Thickness in mm Minimum quantity order per quality Minimum Quantity Order per thickness Width available in mm 200 27000 2.5 5T 2050 200 27005 2.5 5T 2050 200 27007 2.5 5T 2050 200 27008 1.5, 2.5, 5, 5T 2050 6 BLACK 200 48000 2.5 5T 2050 IMPACT CLEAR EI 25 and EI 50 271 10000 2.5 5T 2050 8, 10 10T 2050 272 10000 2.5 5T 2050 IMPACT OPAL 271 27007, 4 15 T 5T 2050 EI 50 271 27008, 4, 5 15 T 5T 2050 SRD Clear Acoustic barriers 247 10000 15, 20 25 T 12T [1900-2050] Special lengths available in 2050 width only: Available lengths from 1500 mm: - up to 5500 mm: all grades proposed in ranges in stock or on request - from 5500 up to 6200 mm: All grades proposed in product range excluding impacts, from 2 to 6 mm. Impacts up to 4mm only. Minimum 1T per length Page /6
Technical specifications for the Altuglas EX sheet range Properties Water absorption, 24 hours Water absorption, 8 days Test method ISO 62 NF T 51002 DIN 5495 ISO 62 NF T 51002 DIN 5495 Unit Altuglas EX thickness mm Altuglas EX value % 4 0.0 % 4 0.50 Maximum water absorption, immersion 1,200 hours Internal % 1.75 Density ISO118 g/cm NF T 5106 1.19 DIN 5479 Poisson ratio at 20 C 0.9 Tensile strength at 2 C Stress at ISO 527-2/1B/5 MPa 4 74 NF T 5104 break Tensile strength at 2 C Modulus of elasticity Tensile strength at 2 C Elongation at break Flexural strength at 2 C Strength at break Flexural strength at 2 C Modulus of elasticity DIN 5455 ISO 527-2/1B/1 NF T 5104 DIN 5455 ISO 527 NF T 5104 DIN 5455 ISO 178 NF T 51001 DIN 5452 ISO 178 NF T 51001 DIN 5452 Charpy impact strength (un-notched) ISO 179/2D NF T 5105 DIN 545 Izod impact strength (notched) ISO 180/1A ASTM D256A Hardness, Rockwell Scale M ISO 209 ASTM D 785 Hardness, Shore D scale ISO 868 NF T 51109 MPa 4 00 % 4 5 Mpa 4 120 Mpa 4 250 KJ/m² 4 10 KJ/m² 4 1. Compressive strength ISO 684 Mpa NF T 51101 4 110 DIN 5454 Shear strength, dynamic modulus DIN 5445 Mpa 1700 Light transmission ISO 1468-1 % 95 80 20027000 20027005 20027006 20027007 20027008 20047001 8 68 50 8 8 Page 4/6
Technical specifications* for the Altuglas EI/EX sheet range Properties* Test method Unit Altuglas EI 25 Altuglas EI 50 Altuglas EX Density ISO 118 g/cm 1.17 1.16 1.19 Water absorption ISO 62 % 0. 0.6 0. Light transmission: mm ASTM D 100 % 92 91.5 92 Haze ASTM D 100 % 0.6 0.9 0.4 Tensile strength ISO 527 Mpa 56 50 74 Elongation at break ISO 527 % 2 45 5 Flexural modulus of elasticity ISO 178 1 mm / minute Mpa 2400 2100 250 Charpy impact strength (un-notched) ISO 179 / 1fU KJ/m² 6 85 16 Charpy impact strength (notched) ISO 179/1eA KJ/m² 4 5 1.4 Vicat 50 N ISO 06 C 102 100 105 Coefficient of linear expansion Maximum continuous service temperature Flame resistance (Euroclass) Flame resistance (France) Flame resistance (Germany) ASTM D696 mm/m/ C 0.075 0.082 0.065 NF EN ISO 11925-2 C 75 7 80 Class - - E NF P92501 Class M4 M4 M4 DIN 4102 Class B2 B2 B2 Flame resistance (UK) BS 476/7 Class 4 4 4 Flame resistance (Italy) CSE Class 5 5 5 * Values shown are average values obtained on mm clear samples in the laboratory Page 5/6
Warranty: Altuglas sheet is guaranteed for 10 years. The warranty covers light transmission, rigidity and tensile strength. Details of the warranty are given in the document entitled "10 Year Guarantee". Quality: Altuglas extruded sheet conforms to the standard ISO 782.2 200. Certificate for Altuglas SRD (acoustic barriers) available on request to inforequest@altuglasint.com. Additional information Technical Brochure: A technical brochure "Cast and Extruded Sheet" is also available if you require detailed information. For further information, please contact your usual supplier. Further details: Altuglas International 89 boulevard National F-92257 LA GARENNE COLOMBES cedex France Tel: +.1.78.66.2.00 Inforequest@altuglasint.com www.altuglas.com Pictures: 2012 Altuglas International Page 6/6