zenithinteriors.com Ivy MELBOURNE SYDNEY CANBERRA BRISBANE PERTH ADELAIDE AUCKLAND WELLINGTON SHANGHAI HONG KONG
Ivy Inspired by the ancient art of topiary, these furniture-sculptures are light and minimal, exploiting the versatility of the metal. FEATURES The Ivy range features a chair with or without arms, lounge chair, sofa, tables and ottoman with integrated lights. The various deep-drawn elements are projection welded together and joined to a frame of metal rods that not only characterises the forms, but also makes the structure extremely solid. The metal sheet is pre-galvanized, and the entire structure undergoes a cataphoretic process before being painted. Suitable for both indoor and outdoor use, optional seat, back and loose cushions are available for the lounge chair and sofa. The ottoman is available with solid sheet metal top and a photovoltaic device with 5 LEDS that store solar enegery during the day and ligat night. Ivy is also available with a complementing table and coffee table. FINISHES Chair & Table Frame: White Table Top: White or Teak DESIGN Paola Navone
DIMENSIONS Ivy Chair 660 660 785 520 1100 900 1920 900 530 530 400 370 370 450 Ivy Armchair 785 660 450 580 Ivy Lounge Chair Ivy Sofa Ivy Ottoman/Luminescent Table
DIMENSIONS Ivy Rectangular Coffee Table 2740 300 1350 740 Ivy Rectangular Table with Steel Sheet Top 1135 750 680
STANDARD FEATURES/FINISHES CHAIR ARMCHAIR LOUNGE CHAIR SOFA OTTOMAN Steel frame Seat cushion --- --- + + --- Back cushion --- ---- + + --- LED lights --- --- --- --- Standard feature Not available + Optional feature
STANDARD FEATURES/FINISHES RECTANGULAR COFFEE TABLE RECTANGULAR TABLE Iron sheet metal with rod frame Sheet metal top Standard feature Not available + Optional feature
CARE & MAINTENANCE 1.DO NOT USE THE FOLLOWING PRODUCTS on any parts made of stainless steel: Chlorine bleach or detergents containing bleach (they can corrode stainless steel) Hydrochloric acid or products containing chlorides (they can corrode stainless steel) 2.Salt, limestone or acids (contained in coffee, wine, orange juice, tomato juice, lemon, etc.) may discolour parts made of stainless steel if not cleaned promptly. 3.Products or parts made of stainless steel used near the seaside or for the interior decoration of swimming pools require more frequent cleaning in order to remove chlorites deposited on them and to prevent corrosion and chemical deterioration of the external surfaces. 4.Stains or rust noted on stainless steel surfaces must be cleaned promptly. 5.Stains left in place for long periods may become permanent. 6.Rust may cause chemical reactions or corrode stainless steel. To remove stains or rust: Apply a specific non-abrasive detergent or polish for stainless steel. Test the product on a stain in a place that is not easily visible to make sure that the original surface finish has not been damaged. Remember to rub in a linear direction (not circular). Do not use abrasive pads. Rinse thoroughly with clean water. Lastly, dry thoroughly in order to prevent streaks from occurring, rubbing in the sense of the fibres.