Code 1. Code 1) Code (1) ASME B 31.1 : Power Piping (2) ASME B 31.3 : Process Piping (3) ASME B 31.4 : Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids 2) Material Code Bolting Square and Hex Bolts and Screws, Inch Series, Including Hex Cap Screws and Lag Screws -------------------------------- Square and Hex Nuts ------------------------------------------------ ASME B18.2.1 ANSI B18.2.2 Metallic Fittings, Valve, And Flanges Ductile Iron Fittings, 3 Inch Through 24 Inch, for Gas ------ Cast Iron Flanges and Flanged Fittings, Class 25,125, 250 and 800 ------------------------------------------------------------------ Malleable Iron Threaded Fittings, Class 125 and 300 ------ Cast Iron Threaded Fittings, Class 125 and 250 ------------- Pipe Flanges and Flanged Fittings ------------------------------- Factory Made Wrought Steel Buttwelding Fittings ----------- Face-to-Face and End-to-Dimensions Of Ferrous Valves - Forged Fittings, Socket Welding and Threaded -------------- Ferrous Pipe Plugs, Bushings, and Locknuts With Pipe Threads ------------------------------------------------------------------ Cast Bronze Threaded Fittings, Class 125 And 250 --------- Cast Copper Alloy Solder Joint Pressure Fittings ------------ Ring Joint Gaskets & Grooves for Steel Pipe Flanges ------ Nonmetallic Flat Gaskets for Pipe Flanges --------------------- Wrought Copper and Copper Alloy Solder Joint Pressure Fittings -------------------------------------------------------------------- ANSI A21.14 ANSI B16.1 ASME B16.3 ASME B16.4 ANSI B16.5 ASME B16.9 ASME B16.10 ASME B16.11 ASME B16.14 ASME B16.15 ANSI B16.18 ASME B16.20 ASME B16.21 ANSI B16.22
Metallic Fittings, Valve, And Flanges(Cont d) Bronze Pipe Flanges and Flanged Fittings, Class 150 and 300 ------------------------------------------------------------------------ Cast Copper Alloy Fittings for Flared Copper Tubes -------- Wrought Steel Butting Welding Short Radius Elbows and Returns ------------------------------------------------------------------ Valves, Flanged, Threaded, and Welding End ---------------- Steel Orifice Flanges, Class 300, 600, 900, 1500, and 2500 Malleable Iron Threaded Pipe Unions, Class 150, 250, and 300 ----------------------------------------------------------------------- Ductile Iron Pipe Flanges and Flanged Fittings, Class 150 And 300 ------------------------------------------------------------------ Large Diameter Steel Flanges, NPS 26 Through NPS 60 - ANSI B16.24 ANSI B16.26 ASME B16.28 ASME B16.34 ANSI B16.36 ASME B16.39 ASME B16.42 ASME B16.47 Flanged Safety-Relief Valves -------------------------------------- Wafer And Wafer Lug Check Valves ----------------------------- Steel and Ductile Iron Plug Valves ------------------------------- Steel Gate Valves Flanged and Buttwelding Ends -------- Compact Steel Gate Valves Flanged, Threaded, Welded, And Extended Body Ends ------------------------------------------- Class 150, Cast, Corrosion-Resistant, Flanged-End Gate Valves ------------------------------------------------------------------- API 526 API 594 API 599 API 600 API 602 API 603 Metal Ball Valves Flanged and Butt-Welding Ends -------- Lug-And Wafer-Type Butterfly Valves --------------------------- API 608 API 609 Ductile-Iron and Gray Iron Fittings, 3 Inch Through 48 Inch, for Water and Other Liquids --------------------------------- Flanged Ductile Iron and Gray Iron Pipe With Threaded Flanges ------------------------------------------------------------------- Steel Pipe Flanges for Water Works Service, 4 Inch Through 144inch ------------------------------------------------------ Dimensions for Steel Water Pipe Fittings ----------------------- Gate Valves, 3 Inch Through 48 Inch, for Water and AWWA C110 AWWA C115 AWWA C207 AWWA C208
Metallic Fittings, Valve, And Flanges(Con d) Sewage Systems ------------------------------------------------------ Rubber-Seated Butterfly Valves ------------------------------------- Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings -------------- Spot Facing for Bronze, Iron and Steel Flanges -------------- Standard Marking System for Valves, Fittings, Flanges, and Unions -------------------------------------------------------------------- Corrosion-Resistant Gate, Globe, Angle and Check Valves With Flanged and Buttweld Ends --------------------------------- Wrought Stainless Steel, Buttwelding Fittings --------------- Steel Pipe Line Flanges --------------------------------------------- Bypass and Drain Connection Standard ------------------------ Class 150LW Corrosion Resistant Cast Flanges and Flanged Fittings -------------------------------------------------------- High Pressure Chemical Industry Flanges and Threaded Stubs for Use with Lens Gaskets -------------------------------- Cast Iron Gate Valves, Flanged and Threaded Ends ------- Cast Iron Swing Check Valves, Flanged and Threaded Ends -- -------------------------------------------------------------------- Ball Valves with Flanged or Buttwelding Ends for General Service ------------------------------------------------------------ Specification for High Test Wrought Buttwelding Fittings -- Socket Welding Reducer Inserts --------------------------------- Bronze Gate, Globe, Angle and Check Valves --------------- Stainless Steel, Bonnetless, Flanged, Knife Gate Valves -- Carbon Steel Pipe Unions, Socket Welding and Threaded Cast Iron Globe and Angle Valves, Flanged and Threaded Ends ---------------------------------------------------------------------- Diaphragm Type Valves --------------------------------------------- Swage Nipple and Bull Plugs ------------------------------- Forged Carbon Steel Branch Outlet Fittings Socket Welding, Threaded, and Butt Welding Ends ------------------- AWWA C500 AWWA C504 MSS SP-6 MSS SP-9 MSS SP-25 MSS SP-42 MSS SP-43 MSS SP-44 MSS SP-45 MSS SP-51 MSS SP-65 MSS SP-70 MSS SP-71 MSS SP-72 MSS SP-75 MSS SP-79 MSS SP-80 MSS SP-81 MSS SP-83 MSS-SP-85 MSS SP-88 MSS SP-95 MSS SP-97
Metallic Fittings, Valve, And Flanges(Cont d) Refrigeration Tube Fittings General Specifications -------- Hydraulic Tube Fittings ---------------------------------------------- SAE J513 SAE J514 Metallic Pipe and Tubes Ductile-Iron Pipe, Centrifugally Cast in Metal Molds or Sand Lined Molds for Gas ------------------------------------------------ Welded and Seamless Wrought Steel Pipe -------------------- Stainless Steel Pipe -------------------------------------------------- Seamless Low Carbon Steel Hydraulic Line Tubing --------- Flanged Cast Iron and Ductile Iron Pipe with Threaded Flanges ----------------------------------------------------------------- Thickness Design of Ductile Iron Pipe -------------------------- Ductile Iron Pipe, Centrifugally Cast In Metal or Sand-Lined Molds, for Water and Other Liquids ----------------------------- Steel Water Pipe 6 Inches And Larger ANSI A21.52 ASME B16.10 ASME B16.19 ANSI B93.11 AWWA C115 AWWA C150 AWWA C151 AWWA C200 Miscellaneous Unified Inch Screw Threads(UN and UNR Thread Form) -- Pipe Threads(Except Dry Seal) ----------------------------------- Dryseal Pipe Threads(Inch) ---------------------------------------- House Coupling Screw Threads ---------------------------------- Metallic Gaskets for Pipe Flanges Ring, Joint, Spiral Wound, and Jacketed ------------------------------------------------ Nonmetallic Flat Gaskets for Pipe Flanges --------------------- Buttwelding Ends ------------------------------------------------------ Surface Texture -------------------------------------------------------- Threading, Gaging and Thread Inspection Of Casing, Tubing, and Line ;Pipe Threads ----------------------------------- ANSI B1.1 ASME B1.20.1 ANSI B1.20.3 ASME B1.20.7 ASME B16.20 ANSI B16.21 ANSI B16.25 ASME B46.1 API 5B Rubber Gasket Joints for Cast and Ductile-Iron Pressure and Fittings -------------------------------------------------------------- Pipe Hangers and Supports Materials, Design, and Manufacture ------------------------------------------------------------ AWWA C111 MSS SP-58
Miscellaneous(Cont d) Silver Brazing Joints for Wrought and Cast Solder Joint Fittings -------------------------------------------------------------------- Screw Threads and Gaskets for Fire Hose Connections --- Sulfide Stress Cracking Resistant Metallic materials for Oil Field Equipment ------------------------------------------------------- MSS SP-73 NFPA1963 NACE MR-01-75 3) Fabrication and Inspection Fabrication Tolerance Cleaning of Fabricated Piping Valve Inspection and Test PFI STD. ES3 PFI STD. ES5 API STD 598 2 Code Association API : American Petroleum Institute ANSI : American national Standard Institute NACE : National Association of Corrosion Engineers BS : British Standard ASME : American Society of Mechanical Engineers KS : Korean Standard MSS : Manufactures Standardization Society AWS : American Welding Society PFI : Pipe Fabrication Institute EJMA : Expansion Joint Manufacturers Association 3. Nozzle Load Equipment Machinery Code API 610 : Centrifugal Pumps for General Refinery Services API 611 : General Purpose Steam Turbines for Refinery Services API 612 : Special Purpose Steam Turbines for Refinery Services API 617 : Centrifugal Compressors for General Refinery Services API 618 : Reciprocating Compressors for General Refinery Services API 650 : Welded Steel tanks for Oil Storage API 661 : Air-Cooled Heat Exchangers for General Refinery Services API 560 : Fired Heaters for General Refinery Services
WRC 107 : Local Stresses in Spherical and Cylindrical shells Due to External Loadings NEMA SM-23 Steam Turbine for Mechanical Drive Service ( Code.)