Curriculum Vitae INTRODUCTION Name : SYARIF JUNAIDI Date of Birth : 21 June 1974 Place of Birth : Ujung Pandang, Indonesia Gender : Male Nationality : Indonesia Present Position : Associate Professor in University of Sharjah Address : Mechanical Engineering Department College of Engineering, PO Box: 27272, Sharjah, UAE Telephone : 06-505 3945 (office), 052-519 8465 (hand phone) E-mail : sjunaidi@sharjah.ac.ae, syarif.junaidi@gmail.com Website : Scopus : www.scopus.com/authid/detail.url?origin=resultslist&authorid= 56113885800&zone= Google Scholar : scholar.google.com.my/citations?user=bzymrlkaaaaj&hl=en FIELD OF SPECIALIZATION Structural and Bio Materials Engineering Research Interest Alloy design and Material processing; Microstructure characterization and Physical Metallurgy; Corrosion of Materials EDUCATION AND ACADEMIC QUALIFICATION Kyushu University, Fukuoka D.Eng 2000-2003 Kyushu University, Fukuoka M. Eng. 1998-2000 Kyushu University, Fukuoka B. Eng. 1994-1998
CAREER HISTORY Associate Professor Mechanical Engineering Department 2015 - now College of Engineering, University of Sharjah Associate Professor Dept. of Mechanical & Materials Eng. 2011-2014 Fac. of Engineering & Built Environment Universiti Kebangsaan Malaysia (UKM) Senior Lecturer Dept. of Mech & Mat. Engineering 2007-2011 Faculty of Engineering, UKM Investigator Advanced Materials Processing & Integrity 2009-2014 Associate Senior Fellow Institute of Fuel Cell, UKM 2014 TEACHING AND LEARNING A.1 List of courses taught (2005-present) No. Course Name Level Year 1 Introduction to Mechanical Eng. Bachelor 2015, 2016 2 Engineering Graphic Design Bachelor 2015, 2016, 2017 3 Engineering Thermodynamics Bachelor 2016, 2017 4 Advanced Thermodynamics Bachelor 2015, 2016, 2017 5 Materials Science Bachelor 2011, 2012, 2013 6 Engineering Materials Bachelor Degree 2006, 2007, 2008, 2009, 2010, 2011, 2016 7 Corrosion and Corrosion 2005, 2006, 2007, 2008, 2009, 2010, Bachelor Degree Technology 2011, 2012, 2013 8 Finite Element Method Bachelor Degree 2007, 2008, 2011, 2013 11 Manufacturing Process Bachelor Degree 2007 12 Engineering Numerical Method Master Degree 2006 13 Corrosion and Corrosion Control Master Degree 2005, 2006, 2008, 2009, 2010 14 Materials for Manufacturing Master Degree 2010, 2011 15 Advanced Engineering Alloy Master Degree 2012, 2013
RESEARCH (Selected Funded Research Project) Funding Duration Status No Code&Title Role Agen Amount Begin cy (AED) End /Expected 1 1602040858-P Investigation of quasicrystal compound formation of Fe-Cu alloy using Molecular Dynamic modeling and experimental analysis: toward application to a mesoporous layer in the third generation photovoltaics and solar absorber 2 1602040832-P Influence of Multiple Carbides on Nucleation and Grain Growth of Austenitic Grain in a Martensitic Stainless Steel: Enhancing Grain Refinement to Submicron Level 3 ERGS/1/2012/TK04/UKM/02/5 Development of Fabrication Method for Porosity-free Beta type Ti-10%Mo-10%Cr Alloy as Novel Metallic Biomaterial 4 03-01-02-SF0805 Synthesis and Fabrication of CNT/Metal Oxide Nanocomposite in Hybrid Junction Structure for Dye-Sensitized Solar Cell 4 03-01-06-SF0958 Development of novel external bone fracture fixation system with innovative biodegradable anchorage to minimize surgical procedure Principal Investigato r Project Leader Project Leader UoS 23,000 1 March 2017 On Going UoS 40,000.00 01/05/2016 On going MOHE 80,000.00 Researcher MOSTI 275,000.00 Researcher MOSTI 350,000.00 01/06/2012-31/05/2014 01/07/2012-31/07/2014 01/01/2012-31/12/2013 31/05/2014 31/07/2014 31/12/2013 6 UKM-AP-NBT-14-2010 Development of Nanostructured Materials for Dental Applications Researcher UKM 350,000 01/10/2010-30/09/2012 01/10/2013
C. PUBLICATIONS (Selected) 1. J Syarif, N Handra, Z Sajuri, MZ Omar. (2018) Change in Tensile Properties of Dual-Phase Steels by Cu Addition, Transactions of the Indian Institute of Metals, Vol. 71 (2), pp. 513-519. 2. J Syarif, E Kurniawan, TN Rohmannudin, MR Rasani, Z Sajuri. (2018) Alloying Behavior and Microstructural Changes of a Ti-10%Mo-10%Cr Alloy on Sintering Process, Sains Malaysiana, Vol. 47 (4), pp. 811-817. 3. NA Latif, Z Sajuri, J Syarif. (2017) Effect of tensile strain rates on flow stress for extruded AZ31 and AZ61 magnesium alloys, International Journal of Automotive and Mechanical Engineering, Vol. 14 (1), pp. 3812-3823. 4. RN Ahmad, N Muhamad, A Wahi, S Junaidi. (2017) Parameter Optimization of Sintering Ti-6Al-7Nb Powder and Palm Stearin Binder System for the Highest Sintered Density using the Taguchi Method, J of Mech. Eng., Vol. 3(1), pp. 55-64. 5. AR. Natasha, JA. Ghani, CH. Che Haron, J. Syarif, AH. Musfirah. (2016) Temperature at The Tool-Chip Interface in Cryogenic and Dry Turning of AISI 4340 Using Carbide Tool, International Journal of Simulation Modeling, Vol. 15, pp. 201-212. 6. NA Latif, Z Sajuri, J Syarif, Y Miyashita. (2016) Effect of loading rate on fracture behaviour of Mg-Al-Zn alloys, Jurnal Teknologi, Vol. 78 (6-9), pp. 83-89. 7. JA Ghani, AR Natasha, CHC Hassan, J Syarif. (2016) TRIZ Approach For Machining Process Innovation In Cryogenic Environment, International Journal of Materials and Product Technology, Vol. 53 (3-4), pp. 286-297 8. MS. Salleh, MZ. Omar, J. Syarif. (2015) The effects of Mg addition on the microstructure and mechanical properties of thixoformed Al 5% Si Cu alloys, Journal of Alloys and Compounds, Vol. 621, pp. 121-130. 9. A. Arifin, AB. Sulong, N. Muhamad, J. Syarif, MI. Ramli. (2015) Powder injection molding of HA/Ti6Al4V composite using palm stearin as based binder for implant material, Materials & Design, Vol. 65, pp. 1028-1034.
10. ZA. Halim, N. Jamaludin, S. Junaidi, SYS. Yahya. (2015) Pattern Recognition Approach of Stress Wave Propagation in Carbon Steel Tubes for Defect Detection,International Journal of Computer Theory and Engineering, Vol. 7 (2), pp. 139. 11. ZA. Halim, N. Jamaludin, S. Junaidi, SYS. Yahya. (2015) Vibration impact acoustic emission technique for identification and analysis of defects in carbon steel tubes: Part A Statistical analysis, Journal of Mechanical Science and Technology, Vol. 29 (4), 1547-1557. 12. ZA. Halim, N. Jamaludin, S. Junaidi, SYS. Yahya. (2015) Vibration impact acoustic emission technique for identification and analysis of defects in carbon steel tubes: Part B Cluster analysis, Journal of Mechanical Science and Technology, Vol. 29 (4), 1559-1570. 13. MS. Salleh, MZ. Omar, J. Syarif, KS. Alhawari, MN. Mohammed. (2014) Microstructure and mechanical properties of thixoformed A319 aluminium alloy, Materials & Design, Vol. 64, pp.142-152