Ontario Provincial Standards 301 St. Paul St., 2 nd Floor North St. Catharines, ON L2R 7R4 Telephone: 905-704-2258 Fax: 905-704-2051 REVISION INFORMATION SHEET ONTARIO PROVINCIAL STANDARDS FOR ROADS AND PUBLIC WORKS VOLUME 1 GENERAL CONDITIONS OF CONTRACT AND SPECIFICATIONS FOR CONSTRUCTION MANUAL REVISION #75 NOVEMBER 2005 Each Owner is responsible for determining implementation dates and directions for use of Ontario Provincial Standards; therefore, manual holders are cautioned about immediately discarding superseded and cancelled standards. NEW METHOD FOR PUBLISHING ONTARIO PROVINCIAL STANDARDS With this publication of the Ontario Provincial Standards comes a new method of publishing the standards, both specifications and drawings. Now the Ontario Provincial Standards are available online with free access on the Ontario Ministry of Transportation (MTO) Library site at: <https://www.raqsa.mto.gov.on.ca/techpubs/ops.nsf/opshomepage>. At this URL, you will find the latest versions of the published standards, archives of the previously published standards, Revision Information Sheets for currently and previously published standards, indexes for each OPS volume, and OPS User Notes. Hard-copy paper versions of the standards are available through Publications Ontario and may be ordered online for a nominal fee at: <http://pubont.stores.gov.on.ca/pool/english/catalogue.asp>. At this URL, you can type Ontario Provincial Standards in the search box, and all related products for the Ontario Provincial Standards will be listed, click on the item you wish to purchase, add the item to your cart, then follow the instructions to complete your order. Hard-copy versions of OPS Volumes 1 to 3 are sold as an item, and OPS Volume 4 is sold separately. Planned for December release will be OPS Volumes 1 to 4 in PDF format on CD and OPS Volumes 3 and 4 in AutoCAD format on a separate CD. Most revisions to the Ontario Provincial Standards are published at the end of November each year. There may also be a limited publishing at the end of April each year for issuing OPSS 127, Schedule Of Rental Rates For Construction Equipment, Including Model And Specification Reference; correcting errors in recently published standards; and issuing time-sensitive revised standards. The Ontario Provincial Standards for Roads and Public Works organization is working with Publications Ontario to develop a system of notifying OPS users, regardless of the source from which they purchased their hard-copy standard volumes. Every effort is being made to ensure a smooth transition from one publisher to the next so OPS users are made aware of revisions to the standards as they are published. It is our intention to keep OPS users informed of available updates to the standards. Rev. Info Sheet - OPS Volume 1: Rev. Number 75 (Date: 11/2005) Page 1
WAITING TO HEAR FROM YOU If you have a suggestion to revise a standard or you have a standard that works in your ministry, municipality, or area, send it to the Head, OPS Administration, for possible inclusion into the Ontario Provincial Standards. This manual is revised as follows: Index Pages Volume 1 Please remove the entire index and replace with the attached revised index. Standard Specifications Volume 1 Superseded/Cancelled (Remove) Revised/New (Insert) Remarks OPSS Dated OPSS Dated 180 January 1994 180 November 2005 GENERAL SPECIFICATION FOR THE MANAGEMENT OF EXCESS MATERIAL 316 April 1991 316 November 2005 CONSTRUCTION SPECIFICATION FOR EXTRUDED EXPANDED POLYSTYRENE FROST HEAVE TREATMENT -- -- 335 November 2005 New Specification CONSTRUCTION SPECIFICATION FOR COLD IN-PLACE RECYCLING WITH EXPANDED ASPHALT 336 November 2000 336 November 2005 CONSTRUCTION SPECIFICATION FOR MICRO-SURFACING 351 September 1996 351 November 2005 CONSTRUCTION SPECIFICATION FOR CONCRETE SIDEWALK 361 November 2004 361 November 2005 CONSTRUCTION SPECIFICATION FOR RUBBLIZING CONCRETE PAVEMENT AND CONCRETE BASE Subsection 361.09.01, Actual Measurement, reformatted. 405 February 1990 405 November 2005 CONSTRUCTION SPECIFICATION FOR PIPE SUBDRAINS 409 April 1999 409 November 2005 CONSTRUCTION SPECIFICATION FOR CLOSED-CIRCUIT TELEVISION INSPECTION OF PIPELINES -- -- 462 November 2005 New Specification CONSTRUCTION SPECIFICATION FOR CEMENT MORTAR LINING OF WATERMAINS Page 2 Rev. Info Sheet - OPS Volume 1: Rev. Number 75 (Date: 11/2005)
Superseded/Cancelled (Remove) Revised/New (Insert) Remarks OPSS Dated OPSS Dated 501 February 1996 501 November 2005 CONSTRUCTION SPECIFICATION FOR COMPACTING 503 April 1999 503 November 2005 CONSTRUCTION SPECIFICATION FOR SITE PREPARATION FOR PIPELINES, UTILITIES, AND ASSOCIATED STRUCTURES 504 April 1999 504 November 2005 CONSTRUCTION SPECIFICATION FOR PRESERVATION, PROTECTION, AND RECONSTRUCTION OF EXISTING FACILITIES 506 November 2001 506 November 2005 CONSTRUCTION SPECIFICATION FOR DUST SUPPRESSANTS 507 April 1999 507 November 2005 CONSTRUCTION SPECIFICATION FOR SITE RESTORATION FOLLOWING INSTALLATION OF PIPELINES, UTILITIES, AND ASSOCIATED STRUCTURES 514 April 1999 514 November 2005 CONSTRUCTION SPECIFICATION FOR TRENCHING, BACKFILLING, AND COMPACTING 515 April 1999 515 November 2005 CONSTRUCTION SPECIFICATION FOR ROCK EXCAVATION FOR PIPELINES, UTILITIES, AND ASSOCIATED STRUCTURES IN OPEN CUT 516 April 1999 516 November 2005 CONSTRUCTION SPECIFICATION FOR EXCAVATING, BACKFILLING, AND COMPACTING FOR MAINTENANCE HOLES, CATCH BASINS, DITCH INLETS, AND VALVE CHAMBERS 517 April 1999 517 November 2005 CONSTRUCTION SPECIFICATION FOR DEWATERING OF PIPELINE, UTILITY, AND ASSOCIATED STRUCTURE EXCAVATION 538 April 1999 538 November 2005 CONSTRUCTION SPECIFICATION FOR SUPPORT SYSTEMS 541 December 1990 541 November 2005 CONSTRUCTION SPECIFICATION FOR CHAIN-LINK FENCE Rev. Info Sheet - OPS Volume 1: Rev. Number 75 (Date: 11/2005) Page 3
Superseded/Cancelled (Remove) Revised/New (Insert) Remarks OPSS Dated OPSS Dated -- -- 547 November 2005 New Specification CONSTRUCTION SPECIFICATION FOR QUADGUARD SYSTEM -- -- 548 November 2005 New Specification CONSTRUCTION SPECIFICATION FOR TRACC SYSTEM -- -- 549 November 2005 New Specification CONSTRUCTION SPECIFICATION FOR TAU II SYSTEM 617 September 1984 617 November 2005 CONSTRUCTION SPECIFICATION FOR INSTALLATION OF ROADWAY LUMINAIRES 630 April 2004 630 November 2005 CONSTRUCTION SPECIFICATION FOR INSTALLATION OF SECTIONAL STEEL HIGH MAST LIGHTING POLES Reference OPSS 601 deleted. OPSS 2476 title revised in Reference section. 910 November 1988 910 November 2005 CONSTRUCTION SPECIFICATION FOR STRESSING SYSTEMS FOR POST-TENSIONING 915 December 1983 915 November 2005 CONSTRUCTION SPECIFICATION FOR SIGN SUPPORT STRUCTURES 920 April 2004 920 November 2005 CONSTRUCTION SPECIFICATION FOR DECK JOINT ASSEMBLIES, PREFORMED SEALS, JOINT FILLERS, JOINT SEALS, JOINT SEALING COMPOUNDS, AND WATERSTOPS - STRUCTURES Revised drawing number and title referenced in Commentary. Page 4 Rev. Info Sheet - OPS Volume 1: Rev. Number 75 (Date: 11/2005)
SUMMARY OF REVISIONS TO OPSS 180 November 2005 GENERAL SPECIFICATION FOR THE MANAGEMENT OF EXCESS MATERIAL Title revised. Section 180.01, Scope, revised. Section 180.03, Definitions, revised definitions for Concrete and Waste. Definitions reordered. Section 180.04, Submission And Design Requirements, subsections revised for Notification of Site Selection and Property Owner Release, Verification of Management by Disposal as Non-Hazardous Solid Industrial or Commercial Waste, and Notification of Forest Resource Licensees. Section 180.07, Construction, revised subsections for Conditions on Management of Excess Material - General, Conditions on Management as Disposable Fill, Conditions on Management by Open Burning, Conditions on Management by Disposal as Non-Hazardous Solid Industrial or Commercial Waste, and Conditions on Management by Stockpiling. Section 180.10, Basis Of Payment, revised. Table 1 revised. Ontario Provincial Standards Forms (OPSF) 180-1, 180-2, 180-3, 180-4, and 180-5 renumbered. OPSF 180-1, 180-2, and 180-3 revised. SUMMARY OF REVISIONS TO OPSS 316 November 2005 CONSTRUCTION SPECIFICATION FOR EXTRUDED EXPANDED POLYSTYRENE FROST HEAVE TREATMENT Section 316.01, Scope, has been rewritten. References have been updated. Reference to OPSS 502 has been deleted. Subsection 316.05.01, Extruded Expanded Polystyrene, has been rewritten. Existing subsection 316.05.02, SS-1 Emulsion, title has been revised to Emulsified Asphalt and the subsection has been rewritten. Subsection 316.05.03, Tack Coat, has been added. Other subsections have been reordered. Section 316.07, Construction, has been rewritten. Subsection 316.09.02, Plan Quantity Measurement, and clause 316.09.01.02 have been added. Tack Coat item added to subsection 316.10.01. Rev. Info Sheet - OPS Volume 1: Rev. Number 75 (Date: 11/2005) Page 5
SUMMARY OF REVISIONS TO OPSS 336 November 2005 CONSTRUCTION SPECIFICATION FOR MICRO-SURFACING Requirements for Micro-Surfacing Type III Modified have been added throughout the specification. References have been updated. Reference to OPSS 180 has been deleted. Reference to OPSS 532 has been added. References to ASTM D 2170 and ASTM D 2419 have been deleted. References to the following Ministry of Transportation Publications have been added: LS-200, LS-216, LS-609, LS-625, Ontario Traffic Manual, Book 7 - Temporary Conditions, and SP-024. Reference to CAN/CSA A3001 has been added. Section 336.03, Definitions, has been added. First paragraph of subsection 336.05.01, Polymer Modified Emulsified Asphalt, has been rewritten. Subsection 336.05.03, Mineral Filler, has been rewritten. Subsection 336.05.07, Tack Coat, has been added. Subsections 336.06.06, Pilot Vehicle; 336.07.01, Operational Constraints; 336.07.02, Documentation, and 336.07.03, Surface Preparation, have been rewritten. Clause 336.07.04.02, paragraph 2 has been rewritten. Existing subsection 336.07.07, Traffic Convoy, has been rewritten and renamed Traffic Control With Moving Vehicles. Subsection 336.07.08, Repairs, has been added and other subsections reordered. Subsection 336.08.01, Sampling, has been rewritten. Subsection 336.08.02, Warranty Requirements, has been added. Section 336.10, Basis of Payment, has been rewritten to delete the item for Traffic Convoy. Table 5, Micro-Surfacing Repair and Replacement Methods, added. Page 6 Rev. Info Sheet - OPS Volume 1: Rev. Number 75 (Date: 11/2005)
SUMMARY OF REVISIONS TO OPSS 351 November 2005 CONSTRUCTION SPECIFICATION FOR CONCRETE SIDEWALK References have been updated. Reference to OPSS 350 has been deleted. Subsection 351.07.01, General, and 351.07.12, Concrete Curing, have been rewritten. Subsection 351.07.17, Management of Excess Material, has been added. Subsection 351.09.02, Plan Quantity Measurement, has been rewritten. SUMMARY OF REVISIONS TO OPSS 405 November 2005 CONSTRUCTION SPECIFICATION FOR PIPE SUBDRAINS References have been updated. References to OPSS 206 and CGSB 41-GP-29 have been deleted. References to OPSS 1004, OPSS 1010, OPSS 1841, and BNQ 3624-115 have been added. Sections 405.03, Definitions, 405.05, Materials, 405.07, Construction, 405.09, Measurement for Payment, and 405.10, Basis of Payment, have been rewritten. Section 405.04, Submission and Design Requirements, has been added. SUMMARY OF REVISIONS TO OPSS 409 November 2005 CONSTRUCTION SPECIFICATION FOR CLOSED-CIRCUIT TELEVISION INSPECTION OF PIPELINES The reference in section 409.02, References, has been updated. In section 409.03, Definitions, definitions for Business Day, CD, DVD, MPEG, and VRC have been added. Existing section 409.04, Submission and Design Requirements, has been rewritten. Existing section 409.05, Materials, has been rewritten. Existing section 409.06, Equipment, has been rewritten. Existing section 409.07, Construction, has been rewritten. Existing section 409.08, Quality Assurance, has been added. Existing section 409.10, Basis of Payment, has been rewritten. Rev. Info Sheet - OPS Volume 1: Rev. Number 75 (Date: 11/2005) Page 7
SUMMARY OF REVISIONS TO OPSS 501 November 2005 CONSTRUCTION SPECIFICATION FOR COMPACTING References have been updated. Reference to OPSS 102 and OPSS 1001 have been deleted. Reference to Ministry of Transportation Publication Report EM-54 deleted. Reference to MTO Laboratory Testing Manual test LS-623 added. Section 501.03, Definitions, has been added. Subsection 501.05.02, Earth, has been deleted. Subsection 501.05.03, Water, has been rewritten. Clause 501.06.01.01 has been rewritten. Existing clause 501.06.01.02 has been deleted. Subsection 501.06.02, Hand Operated Vibratory Equipment, has been renumbered 501.06.01.02. Existing subsection 501.06.03, Water, has been renumbered 501.06.02 and has been rewritten. Subsection 501.06.03, Nuclear Moisture and Density Gauge, has been added. Subsection 501.07.02, Restricted Zones, has been added. Existing subsection 501.07.02, Water for Compaction, has been renumbered 501.07.03 and rewritten. Subsection 501.07.03, Compacting, has been deleted. Subsection 501.07.04, Quality Control, has been added. Sections 501.08, Quality Assurance; 501.09, Measurement for Payment; and 501.10, Basis of Payment, have been rewritten. An Appendix has been added for the Field Compaction Report. Page 8 Rev. Info Sheet - OPS Volume 1: Rev. Number 75 (Date: 11/2005)
SUMMARY OF REVISIONS TO OPSS 503 November 2005 CONSTRUCTION SPECIFICATION FOR SITE PREPARATION FOR PIPELINES, UTILITIES, AND ASSOCIATED STRUCTURES References have been updated. OPSS 180 reference has been deleted. OPSS 577 reference has been added. Existing subsection 503.07.04, Shrub and Tree Relocation, has been rewritten. Existing subsection 503.07.05, Tree Pruning, has been renamed and rewritten. Existing subsection 503.07.06, Stripping and Stockpiling Topsoil, has been rewritten. Existing subsection 503.07.08, Management and Disposal of Excess Material, has been renamed and rewritten. SUMMARY OF REVISIONS TO OPSS 504 November 2005 CONSTRUCTION SPECIFICATION FOR PRESERVATION, PROTECTION, AND RECONSTRUCTION OF EXISTING FACILITIES References have been updated. OPSS 180 reference has been deleted. Existing subsection 504.07.02, Notification, has been rewritten. Existing subsection 504.07.06, Management and Disposal of Excess Material, has been renamed and rewritten. Existing section 504.10, Basis of Payment, has been rewritten. SUMMARY OF REVISIONS TO OPSS 506 November 2005 CONSTRUCTION SPECIFICATION FOR DUST SUPPRESSANTS Reference to OPSS 102 has been deleted. Reference to OPSS 2503 has been added. Reference to and requirement for Ministry of Environment Letter of Agreement deleted throughout specification. Subsection 506.04.01, Dust Suppressants, has been rewritten. Subsection 506.05.03, Magnesium Chloride Flake and Magnesium Chloride Solution, has been added. Subsection 506.06.02, Mixing Tanks, has been deleted. Other subsections have been reordered. Subsection 506.07.01, General, has been rewritten. Rev. Info Sheet - OPS Volume 1: Rev. Number 75 (Date: 11/2005) Page 9
Clause 506.07.02.01 has been rewritten. Clause 506.07.02.02 and subsection 506.07.03, Management of Excess Material, have been added. Sections 506.09, Measurement and Payment, and 506.10, Basis of Payment, have been rewritten. SUMMARY OF REVISIONS TO OPSS 507 November 2005 CONSTRUCTION SPECIFICATION FOR SITE RESTORATION FOLLOWING INSTALLATION OF PIPELINES, UTILITIES, AND ASSOCIATED STRUCTURES The references in section 507.02, References, have been updated. OPSS 1541 reference has been added. OPSS 180 reference has been deleted. Existing subsection 507.05.07, Chain-Link Fence, has been rewritten. Existing subsection 507.05.08, Gates, has been rewritten. Existing subsection 507.07.02, Grading, has been rewritten. Existing subsection 507.07.04, Fences and Guide Rails, has been rewritten. Existing subsection 507.07.06, Shrub and Tree Replanting, has been rewritten. Existing subsection 507.07.09, Management and Disposal of Excess Material, has been renamed and rewritten. SUMMARY OF REVISIONS TO OPSS 514 November 2005 CONSTRUCTION SPECIFICATION FOR TRENCHING, BACKFILLING, AND COMPACTING The references in section 514.02, References, have been updated. OPSS 180 reference has been deleted. The definition for Maximum Dry Density in section 514.03, Definitions, has been deleted. Existing subsection 514.07.07, Temporary Protection Systems, has been renamed and rewritten. Clause 514.07.10.01 has been rewritten. Clause 514.07.10.05 has been rewritten. Existing subsection 514.07.13, Management and Disposal of Excess Material, has been renamed and rewritten. Page 10 Rev. Info Sheet - OPS Volume 1: Rev. Number 75 (Date: 11/2005)
SUMMARY OF REVISIONS TO OPSS 515 November 2005 CONSTRUCTION SPECIFICATION FOR ROCK EXCAVATION FOR PIPELINES, UTILITIES, AND ASSOCIATED STRUCTURES IN OPEN CUT The references in section 515.02, References, have been updated. OPSS 120 and 180 references have been deleted. Existing subsection 515.07.01, Use of Explosives, has been rewritten. Existing subsection 515.07.02, Management and Disposal of Excess Material, has been renamed and rewritten. In clause 515.09.01.01, the width measurement has been rewritten. SUMMARY OF REVISIONS TO OPSS 516 November 2005 CONSTRUCTION SPECIFICATION FOR EXCAVATING, BACKFILLING, AND COMPACTING FOR MAINTENANCE HOLES, CATCH BASINS, DITCH INLETS, AND VALVE CHAMBERS The references in section 516.02, References, have been updated. OPSS 180 reference has been deleted. The definition for Maximum Dry Density in section 516.03, Definitions, has been deleted. Existing subsection 516.07.01, General, has been rewritten. Existing subsection 516.07.08, Excavation, has been rewritten. Existing subsection 516.07.10, Additional Excavating, Backfilling, and Compacting, has been rewritten. Existing subsection 516.07.12, Management and Disposal of Excess Material, has been renamed and rewritten. SUMMARY OF REVISIONS TO OPSS 517 November 2005 CONSTRUCTION SPECIFICATION FOR DEWATERING OF PIPELINE, UTILITY, AND ASSOCIATED STRUCTURE EXCAVATION The references in section 517.02, References, have been updated. Section 517.04, Submission and Design Requirements, has been added. Subsection 517.07.01, Dewatering, has been rewritten. Rev. Info Sheet - OPS Volume 1: Rev. Number 75 (Date: 11/2005) Page 11
SUMMARY OF REVISIONS TO OPSS 538 November 2005 CONSTRUCTION SPECIFICATION FOR SUPPORT SYSTEMS Section 538.04, Submission and Design Requirements, has been added. Subsection 538.07.02, Installation, has been rewritten. Subsection 538.07.04, Management of Excess Material, has been added. SUMMARY OF REVISIONS TO OPSS 541 November 2005 CONSTRUCTION SPECIFICATION FOR CHAIN-LINK FENCE Section 541.02, References, OPSS 1350, FF-T-791b, CAN2-138.1, CAN2-138.2, CAN2-138.4, CSA G162.1, and CSA-G164 have been deleted. OPSS 1541 and ASTM A 780 have been added. CSA W59 has been updated. Section 541.03, Definitions, definitions have been reordered. Definitions for Barbed, Corner Post, Non-Shrink Cement Grout, and Straining Post have been deleted. Definitions for Barbed Wire Arm, Twisted, and Selvage have been added. Definitions for Bottom Wire, End Post, Gate Post, Line Post, Terminal Post, Top Rail, and Top Wire have been rewritten. Section 541.05, Materials, material requirements have been moved to new OPSS 1541. Existing subsection 541.07.01, Chain Link Fence, has been deleted. Existing clause 541.07.01.01 has been renumbered to 541.07.01 and rewritten. Clause 541.07.02.01.01 has been added to replace existing clauses 541.07.01.02 and 541.07.02.01. Existing clause 541.07.01.03 has been renumbered to 541.07.02.01.02, renamed to Posts on Concrete Barrier, and 1 st paragraph has been rewritten. Clause 541.07.01.04 has been renumbered to 541.07.02.01.03 and 2 nd and 3 rd paragraphs have been deleted. Clause 541.07.02.03 has been added to replace existing clauses 541.07.01.05 and 541.07.01.06. Existing clause 541.07.01.07 has been renumbered to 541.07.02.04 and rewritten. Existing clause 541.07.01.08 has been renumbered to 541.07.05. Existing clause 541.07.01.09 has been renumbered to 541.07.02.05 and rewritten. Existing clause 541.07.01.10 has been renumbered to 541.07.04 and rewritten. Existing subsection 541.07.02, Terminal Posts, has been deleted. Clause 541.07.02.02 has been rewritten. Existing clause 541.07.02.03 has been deleted. Subsection 541.07.03, Gates, has been rewritten. Page 12 Rev. Info Sheet - OPS Volume 1: Rev. Number 75 (Date: 11/2005)
Clause 541.07.03.01, 1 st paragraph has been rewritten. Subsection 541.07.06, Management of Excess Material, has been added. Section 541.08, Quality Assurance, has been added. Existing clause 541.09.01.01 has been rewritten. Existing clause 541.09.01.02 has been deleted. Other clause reordered. Subsection 541.10.01, item Terminal Posts has been deleted. Subsection 541.10.02, Removals and Replacements, has been added. SUMMARY OF REVISIONS TO OPSS 617 November 2005 CONSTRUCTION SPECIFICATION FOR INSTALLATION OF ROADWAY LUMINAIRES Section 617.01, Scope, has been rewritten. Section 617.02, References, has been updated. OPSS 601, OPSS 2426, OPSS 2428, CSA C22.2 No. 59, CSA C22.2 No. 97, CSA C22.2 No. 136, CSA G164, CSA W59, ANSI A53, and IES Lighting Handbook references deleted. CSA C22.2 No. 9.0, CSA C22.2 No. 211.2, and CSA C22.2 No. 248.8 references added. Section 617.03, Definitions, has been added. Existing subsection 617.05.01, Luminaires, Roadway Lighting Type, has been rewritten, renamed, and renumbered to 617.05.01.01. Clause 617.05.01.02 has been added and other clauses reordered. Existing subsection 617.05.02, Luminaires, Floodlighting Type, has been rewritten, renamed, and renumbered to 617.05.01.03. Existing subsection 617.05.03, Lamps, has been rewritten and renumbered to 617.05.02 and Table 1 has been moved to the back of the specification. Existing subsections 617.05.07, Brackets, Roadway Lighting Type and 617.05.08, Brackets, Floodlighting Type, have been rewritten and combined into subsection 617.05.06, Brackets. Existing subsection 617.05.09, Conduit and Fittings, has been rewritten and renumbered to 617.05.07. Existing subsection 617.05.12, Fuse Holders and Fuses, has been rewritten and renumbered to 617.05.10. Existing subsection 617.07.01, General, has been rewritten, 1 st paragraph has been rewritten, renamed, and renumbered to 617.07.03, Lamp Installation, and 2 nd paragraph has been rewritten, renamed, and renumber to 617.07.04.01, General. Clause 617.07.04.01, 2 nd, 3 rd, and 4 th paragraphs have been added. Subsection 617.07.02, Removals, has been added. Rev. Info Sheet - OPS Volume 1: Rev. Number 75 (Date: 11/2005) Page 13
Existing subsection 617.07.02, Brackets, Roadway Lighting Type, has been rewritten, renamed, and renumbered to 617.07.05.01. Existing subsection 617.07.03, Brackets, Floodlighting Type, has been rewritten, renamed, and renumbered to 617.07.05.02. Existing subsection 617.07.04, Luminaires, Roadway Lighting Type, 1 st paragraph has been rewritten, renamed, and renumbered to 617.07.04.02. Existing subsection 617.07.05, Luminaires, Floodlighting Type, 1 st and 3 rd paragraphs have been rewritten, renamed, and renumbered to 617.07.04.04. Clause 617.07.04.03 has been added. Existing subsection 617.07.06, Wiring and Connections, 4 th paragraph has been rewritten and renumbered to 617.07.06. Other subsections reordered. Existing subsection 617.07.10, Quality Control, has been split into two clauses, rewritten, and renumbered to 617.07.10.01 and 617.07.10.02. Section 617.09, Measurement for Payment, has been rewritten. Section 617.10, Basic of Payment, has been rewritten. Appendix 617-B has been added. SUMMARY OF REVISIONS TO OPSS 910 November 2005 CONSTRUCTION SPECIFICATION FOR STRESSING SYSTEMS FOR POST-TENSIONING Title revised. Section 910.01, Scope, revised. Section 910.02, References, added references OPSS 1304; Structural Manual, Division 1; CSA A283 and S6; ASTM A 53/A 53M, A 416/A 416M, D 2239, D 3350, and D 4285; and ISO/IEC Guide 17025. Deleted references OPSS 904, 919, 1301, 1303, 1350, and 1442; and Ontario Highway Bridge Design Code. Existing references updated. Section 910.03, Definitions, added definitions for Cementing Materials, Coupler, Deviator, Engineer, Primary Tendon Anchorages, Splice - Prestressing Tendon, Sublot, and Vent. Revised definitions for Calibration, Grout, and Proposal. Section 910.04, Submission and Design Requirements, rewritten. Section 910.05, Material, revised section entirely. Section 910.06, Equipment, added subsections for Air Compressor - Air Blasting, Grout Testing Equipment, and Malfunction of Gauges. Revised and reordered existing subsections. Section 910.07, Construction, revised section entirely. Page 14 Rev. Info Sheet - OPS Volume 1: Rev. Number 75 (Date: 11/2005)
Section 910.08, Quality Assurance, added subsections for Testing of Prestressing Steel; Anchorages, Spirals, and Couplers; Anchorage Outlet Sampling of Grout; and Material, Stressing Records and Test Results. Deleted subsection for Friction Test. Existing subsection revised and reordered. Section 910.09, Measurement for Payment, section deleted. Section 910.10, Basis of Payment, added subsection for Stressing System Payment Adjustment. Deleted subsection for Concrete. Existing subsection revised. SUMMARY OF REVISIONS TO OPSS 915 November 2005 CONSTRUCTION SPECIFICATION FOR SIGN SUPPORT STRUCTURES Section 915.01, Scope, revised. Section 915.02, References, added references OPSS 501, 603, 609, 902, 903, 904, 905, 906, 907, 911, 919, 1010, 1350, 1440, and 1601; Structural Manual, Division 1; CSA G40.21, S6, W47.2, W59, W59.2M, W178.1, and W178.2; ASTM A 307, A 314, A 325, A 325M, A 449, A 500, B 209M, and B 221M; CGSB 48.9712; SAE J403; and ISO/IEC Guide 17025. Deleted references CSA HA Series-M, S157, and S244. Section 915.03, Definitions, added definitions for Cantilever Sign Support, Column, Column Sign Support, Engineer, Leg, Monotube Overhead Sign Support, Overhead Sign Support Structure, Proposal, Sweep, and Sign. Section 915.04, Submission And Design Requirements, completely revised with subsection added for Submissions, and one for Design. Deleted existing subsection Shop Drawings for Steel Monotube Type Overhead Sign Supports, and subsection for Drawings of Erection Operation for Sign Support Structures. Section 915.05, Material, added subsections for General, Clamps, Concrete, Reinforcing Steel, Wood, Anchorage Assembly, Primer and Locking Compound, Electrical, Granular Backfill, and Coatings. Existing subsections revised. Section 915.07, Construction, completely revised with subsections added for Fabrication - Sign Support Structures, Footings - Overhead Sign Support Structures, Installation of Sign Support Structures, Steel and Wood Column Sign Supports, Site Trimming Around Footings, Bridge Mounted Sign Support Structures - Aluminum, Attachment of Signs, Quality Control, Submission of Certificate of Conformance, Repair of New and Existing Structures, and As Built Drawings. Existing subsections deleted with information incorporated into added subsections. Section 915.08, Quality Assurance, added. Section 915.09, Measurement For Payment, added subsections for Actual Measurement, and Plan Quantity Measurement. Deleted subsections for Sign Support Structures, and Sign Support Structure Footings. Section 915.10, Basis of Payment, added subsection to include items for sign support footings and sign support structures payment. Deleted subsections, Sign Support Structures, and Concrete Sign Support Structure Footings. Existing information revised and included in the added item subsection. Rev. Info Sheet - OPS Volume 1: Rev. Number 75 (Date: 11/2005) Page 15