catalog C-bV-0413 ahead of the flow Ball Valves
Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services be continuously developed and introduced to keep our customers at the center of our business efforts. NIBCO provides an entire suite of business-to-business solutions that is changing the way we interact with customers. NIBCOpartner.com sm is an exclusive set of secure web applications that allow quick access to customer-specific information and online order processing. This self-service approach gives you 24/7 access to your order status putting you in total control of your business. Real time information includes: Online order entry Viewable invoices & reports Inventory availability Current price checks Order status Online library of price sheets, catalogs & submittals Electronic Data Interchange (EDI) makes it possible to trade business documents at the speed of light. This technology cuts the cost of each transaction by eliminating the manual labor and paperwork involved in traditional order taking. This amounts to cost-savings, increased accuracy and better use of resources. With EDI, you can trade: Purchase orders PO Acknowledgements Invoices Product activity data Advanced ship notices Remittance advice Vendor Managed Inventory (VMI), a sophisticated service for automated inventory management, reduces your overhead by transferring inventory management, order entry and forecasting to NIBCO. This is an on-going, interactive partnership with NIBCO. Through automation, VMI brings results: Improves customer service Optimum inventory efficiencies Better forecasting Cuts transaction costs Peace of mind Relief from day-to-day management TECH SERVICES PH:1.888.446.4226 FAX: 1.888.336.4226 INTERNATIONAL OFFICE PH: +1.574.295.3327 FAX: +1.574.295.3455
Table of Contents Page Contents.................................................... 3 Bronze Ball Valves.... 4-42 Figure Number Key......................................... 4 Illustrated Index 1 and 2-Pc. Ball Valves... 5 Illustrated Index 3-Pc. Ball Valves... 6 T-560-BR-R-20/Y-20...7 T-560-BR-R-66/Y-66....8 T/S-580-70............................................... 9 T/S-580-70-66............................................ 10 T/S-585-70.............................................. 11 T/S-585-70-66............................................ 12 TS/ST-585-70............................................. 13 MTT-585-70.............................................. 14 T-585-70-CP.............................................. 15 T/S-585-70-HC w/hose Cap and Chain...16 T/S-585-70-66-HC w/hose Cap and Chain...17 T/S-585-70-SU w/single Union...18 TS/ST-585-70-SU w/single Union...19 T-585-70-66-ST 250# Steam Rated....20 T-585/580-70-SV w/safety Vent....21 T-585/580-70-UL.......................................... 22 TM-585-70-66 w/ Mounting Pads... 23 T/S-585-70-W3 Three-Way Valve....24 T/S-585-70-66-W3 Three-Way Valve...25 T/S-590-Y............................................... 26 T/S-590-Y-66............................................. 27 T-590-Y-UL............................................... 28 G-590-Y................................................. 29 G-590-Y-66.............................................. 30 T/S-595-Y............................................... 31 T-595-Y-SS............................................... 32 T/S-595-Y-66............................................. 33 T-595-Y-66-SS............................................ 34 TS-595-Y................................................ 35 G-595-Y................................................. 36 G-595-Y-66.............................................. 37 T-595-Y-UL............................................... 38 CS-595-Y-X/EC........................................... 39 CS-595-Y-X-66/EC...40 Pressure/Temperature Ratings...41 Carbon Steel Ball Valves (Thd, SW, BW).... 42-56 Figure Number Key........................................ 42 Illustrated Index 1, 2 and 3-Pc. Ball Valves...43 T-560-CS-R-25-LL....44 T-560-CS-R-25-FS-LL...45 T-560-CS-R-66-LL....46 T-560-CS-R-66-FS-LL...47 T-570-CS-R-25............................................ 48 T-570-CS-R-66............................................ 49 TC-580-CS-R-25-LL...50 TC-580-CS-R-66-LL...51 T-580-CS-R-25............................................ 52 T-580-CS-R-66............................................ 53 TM/KM/BM-590-CS-R-66-FS-LL....54 T/K-595-CS-R-66-LL...55 TM/KM-595-CS-R-66...56 Visit our website for the most current information. T-585-S6-R-66-LL....62 TM/KM/BM-590-S6-R-66-FS-LL...63 T/K-595-S6-R-66-LL....64 TM/KM-595-S6-R-66...65 Pressure/Temperature Ratings... 66-67 Carbon Flanged Ball Valves...68-75 Figure Number Key........................................ 68 Illustrated Index Flanged Ball Valves...69 Flanged Detail of Unibody Design...70 Flanged Detail of Split-Body Design....71 F-510-CS-R-66-FS...72 F-530-CS-R-66-FS...73 F-515-CS-F-66-FS...74 F-535-CS-F-66-FS...75 Stainless Flanged Ball Valves...76-81 Illustrated Index Flanged Ball Valves...76 F-510-S6-R-66-FS...77 F-530-S6-R-66-FS...78 F-515-S6-F-66-FS....79 F-535-S6-F-66-FS....80 Pressure/Temperature Ratings...81 Options and Accessories...82-90 Options and Accessories Index....82 Bronze Ball Valves Options and Accessories...83 NIB-SEAL Technical Data...84 Bronze Ball Valves Options and Accessories (continued)... 85 CS/SS Ball Valves Options and Accessories...86 CS/SS Flanged Ball Valves Options and Accessories...87 Quick Reference for Ball Valve Options...88 Seat Materials PTFE and 15% RPTFE... 89 Seat Materials 25% RPTFE, Carbon PTFE and Nylon...90 System Control Products....91-102 System Control Products Index....91 Ball Valve Actuation and Control...92 Circuit Balancing Valves...93 Ball Valve Actuation Data Sheet...94 TM/585-70-66-AP w/pneumatic Actuator...95 TM-585-CV w/reduced Orifice Ball...96 Torque Charts for Ball Valves... 97-98 Two-Piece and Three-Way Actuator Mounting Data Bronze T-585-WS and TM/AT-5858....99 Two-Piece Actuator Mounting Data CS/SS T/TC-580 Series...100 Three-Piece Actuator Mounting Data Bronze 590/595 Series....101 Three-Piece Actuator Mounting Data CS/SS TM/KM-595 Series...102 Engineering Data...................................... 103-114 Engineering Data Index....103 Ball Valve s...104 Temperature Limits of Material...105 Flow Data.......................................... 106-107 Valve Properties Bronze, Brass, Copper and Iron.... 108-109 Valve Properties Steel, SS and Alloys... 110-111 Valve Installation Tips....112 Figure Number Comparisons....113 Valve Warranty.......................................... 114 Page Stainless Steel Ball Valves (Thd, SW, BW).... 57-67 Figure Number Key........................................ 57 Illustrated Index 1, 2 and 3-Pc. Ball Valves...58 T-560-S6-R-66-LL....59 T-560-S6-R-66-FS-LL....................................... 60 T-580-S6-R-66-LL....61 3
Bronze Ball Valves One, Two, and Three-Piece Body Threaded, Solder and Grooved Ends Bronze Ball Valve Figure Number Key T-560-BR-R-20- ** End Connection BM - Butt Weld ISO Mount G - Grooved GM - Grooved ISO Mount KM - Socket Weld ISO Mount MTT - Male x Female Thread S - Solder ST - Solder x Thread T - Thread TC - Thread (investment cast carbon body) TM - Thread ISO Mount TS - Thread x Solder Valve Style 560 - One-Piece Body Reduced Port 600 PSI 580 - Two-Piece Conventional Port 400 PSI 580-70 - Two-Piece Conventional Port 600 PSI 585-70 - Two-Piece Full Port 600 PSI 585-CV - Two-Piece with a Flow Control Port 590 - Three-Piece Body Conventional Port 600 PSI 595 - Three-Piece Body Full Port 600 PSI Basic Material Seat Material *BR - Bronze R - Reinforced Y - Virgin PTFE * BR only applies to T-560 line. ** 70 only applies to T or S-580-70 and T or S-585-70 series valves. This key is a guide only and is not intended to infer that every valve combination will be produced. Key for threaded, socket weld, grooved end ball valves. Trim Material 20 - Bronze 66 - Stainless Steel **70 - Bronze/Chrome Plated Ball Options BSP - British Standard Thread (Parallel) BST - British Thread (Taper) CP - Chrome Plated EL - Extended Lever HC - Hose Cap and Chain HCL - Horizontal Chain Lever IC - Integral Check LL - Locking Lever M - Memory Stop NS - NIB-SEAL Handle OL - Oval Locking OV - Oval Handle RH - Round Handle SS - Stainless Steel Externals ST - Steam Service SU - Single Union End SV - Safety Vent UL - UL Listed VCL - Vertical Chain Lever W3 - Three-Way Valve WH - Wing Handle X - Oxygen Cleaned Dezincification Resistant De-alloying corrosion, known as Dezincification, was effectively eradicated from valve products in the 1950s. Today, however, this problem has returned with the increased use of high-zinc alloys (commonly referred to as Yellow Brass ) in forged and cast valves typically produced outside the United States. Dezincification selectively removes zinc from the alloy, leaving behind a porous, copper-rich structure that has little mechanical strength. The physical attributes of an in-service valve with Dezincification includes a white powdery substance or mineral stains on its exterior surface. What s the cure? On all bronze valves the metal components in the waterway must not contain more than 15% zinc in their chemical makeup. As a standard NIBCO bronze ball valves are made to be Dezincification Resistant, which is a seal of quality and longevity. 4
One-Piece and Two-Piece Bronze Ball Valves Illustrated Index One-Piece Bronze Ball Valve Up to 600 lb. CWP Two-Piece Bronze Ball Valve 600 lb. CWP Two-Piece Bronze Hose End Ball Valve 600 lb. CWP T-560-BR-20/T-560-BR-66 Sizes ¹ ₄" thru 2" Threaded Ends Page 7, 8 Two-Piece Bronze Single Union Ball Valve 600 lb. CWP T or S-580-70/T or S-580-70-66 Sizes 1¹ ₄" thru 3" T or S-585-70/T or S-585-70-66 Sizes ¹ ₄" thru 2" Threaded or Solder Ends Other End Connections Page 9-15 Two-Piece Bronze 250 Steam Ball Valve 250 lb. SWP 600 lb. CWP T or S-585-70-HC/T or S-585-70-66-HC Sizes ¹ ₂" thru ³ ₄" Threaded or Solder Ends Page 16, 17 Two-Piece Safety Vent Bronze Ball Valve 600 lb. CWP T or S-585-70-SU Sizes ¹ ₂" thru 2" Threaded or Solder Ends Page 18, 19 Two-Piece UL/LP Gas Bronze Ball Valve 250 lb. CWP T-585-70-66-ST Sizes ¹ ₂" thru 2" Threaded Ends Page 20 Two-Piece Act. Mount Bronze Ball Valve 600 lb. CWP T-580-70-SV Sizes 1¹ ₄" thru 2" T-585-70-SV Sizes ¹ ₄" thru 1" Threaded Ends Page 21 Bronze 3-Way Ball Valve 400 lb. CWP T-580-70-UL Sizes 1¹ ₄" thru 3" T-585-70-UL Sizes ¹ ₄" thru 1" Threaded Ends Page 22 TM-585-70-66 Sizes ¹ ₂" thru 2¹ ₂" Threaded Ends Page 23 T-585-70-W3 Sizes 1¹ ₄" thru 2" T or S-585-70-W3 Sizes ¹ ₂" thru 1" Threaded or Solder Ends Page 24, 25 5
Three-Piece Bronze Ball Valve Illustrated Index Dezincification Resistant Three-Piece Bronze Ball Valve 600 lb. CWP Three-Piece Bronze Ball Valve 600 lb. CWP 175 PSI LP Gas Three-Piece Bronze Ball Valve 600 lb. CWP T or S-590-Y/T or S-590-Y-66 Sizes ¹ ₄" thru 3" Threaded or Solder Ends Page 26, 27 T-590-Y-UL Sizes ¹ ₄" thru 3" Threaded Ends Page 28 G-590-Y/G-590-Y-66 Sizes 1¹ ₂" thru 3" Grooved Ends Page 29, 30 Three-Piece Bronze Ball Valve 600 lb. CWP Three-Piece Bronze Ball Valve 600 lb. CWP Three-Piece Bronze Ball Valve 600 lb. CWP T or S-595-Y/T-595-Y-SS/T or S-595-Y-66/ T-595-Y-66-SS Sizes ¹ ₄" thru 2¹ ₂" Threaded or Solder Ends Page 31-34 TS-595-Y Sizes ¹ ₄" thru 2" Threaded x Solder Ends Page 35 G-595-Y/G-595-Y-66 Sizes 1¹ ₂" thru 2¹ ₂" Grooved Ends Page 36, 37 Three-Piece Bronze Ball Valve 600 lb. CWP 175 PSI LP Gas Three-Piece Bronze Ball Valve 200 lb. PSI Medical Gas Pressure Temperature Chart T-595-Y-UL Sizes ¹ ₄" thru 2" Threaded Ends Page 38 CS-595-YX/CS-595-YX-66/EC Sizes ¹ ₂" thru 2" Solder Ends Page 39, 40 Page 41 6
Bronze Ball Valves One-Piece Body Reduced Port Bronze Trim Blowout-Proof Stem Dezincification Resistant 600 PSI/41.4 Bar Non-Shock Cold Working Pressure u CONFORMS TO MSS SP-110 1. Handle Nut Zinc Plated Steel 2. Identification Plate Aluminum 3. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 4. 1 Packing Nut Stainless Steel 5. Belleville Washer Zinc Plated Steel 6. Travel Stop Zinc Dichromate Plated Steel 7. Pack Gland Brass ASTM B 16 Alloy C36000 8. Packing Reinforced PTFE 9. Grounding Washer Stainless Steel ASTM A 167 Type 304 10. Thrust Washer Reinforced PTFE 11. Stem Bronze ASTM B 371 Alloy C69430 12. Ball Brass ASTM B 124 Alloy C37700 or ASTM B 16 Alloy C36000 13. Seat Ring (2) *PTFE (Y) or Reinforced PTFE (R) 14. Body Insert Bronze ASTM B 584 Alloy C84400 15. Body Bronze ASTM B 584 Alloy C84400 16. Body End Piece Brass ASTM B 16 Alloy C36000 (not shown) ¹ ₄ and ³ ₈ size only 1 ¹ ₄"-³ ₄" ASTM A 582 Type 416. 1"-2" 300 Series. T-560-BR- * -20 Threaded T-560-BR- * -20 NPT x NPT Size A B C D E F G T-560-BR- *-20 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.63 67 1.34 34 1.63 41.38 10 4.00 102 1.22 31 10-24.66.30 50 ³ ₈ 10 2.63 67 1.34 34 1.63 41.38 10 4.00 102 1.22 31 10-24.63.28 50 ¹ ₂ 15 2.63 67 1.34 34 1.63 41.38 10 4.00 102 1.22 31 10-24.59.27 50 ³ ₄ 20 2.88 73 1.50 38 1.71 43.50 13 4.00 102 1.22 31 10-24.82.37 50 1 25 3.31 84 1.71 43 2.00 51.63 16 4.69 119 1.34 34 ¹ ₄-20 1.36.62 40 1 ¹ ₄ 32 3.84 98 1.97 50 2.06 52.81 21 4.69 119 1.50 38 ¹ ₄-20 2.01.91 20 1 ¹ ₂ 40 4.03 102 2.03 52 2.56 65 1.00 25 6.75 171 1.63 41 ¹ ₄-20 2.75 1.25 20 2 50 4.59 117 2.28 58 2.75 70 1.25 32 6.75 171 2.06 52 ¹ ₄-20 4.16 1.89 10 Note: G Holes are only tapped for actuated valves. u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 7
Bronze Ball Valves One-Piece Body Reduced Port Stainless Trim Vented Ball Blowout-Proof Stem 600 PSI/41.4 Bar Non-Shock Cold Working Pressure u Dezincification Resistant CONFORMS TO MSS SP-110 1. Handle Nut Stainless Steel 300 Series 2. Identification Plate Aluminum 3. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 4. 1 Packing Nut Stainless Steel 5. Belleville Washer Zinc Plated Steel 6. Travel Stop Zinc Dichromate Plated Steel 7. Pack Gland Stainless Steel ASTM A 167 Type 316 8. Packing Reinforced PTFE 9. Grounding Washer Stainless Steel ASTM A 240 Type 304 10. Thrust Washer Reinforced PTFE 11. Stem Stainless Steel ASTM A 276 Type 316 12. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 13. Seat Ring (2) *PTFE (Y) or Reinforced PTFE (R) 14. Body Insert Bronze ASTM B 584 Alloy C84400 15. Body Bronze ASTM B 584 Alloy C84400 16. Body End Piece Brass ASTM B 16 Alloy C36000 (not shown) ¹ ₄ and ³ ₈ size only 1 ¹ ₄"-³ ₄" ASTM A 582 Type 416. 1"-2" 300 Series. T-560-BR- * -66 Threaded T-560-BR- * -66 NPT x NPT Size A B C D E F G T-560-BR- *-66 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.63 67 1.34 34 1.63 41.38 10 4.00 102 1.22 31 10-24.66.30 50 ³ ₈ 10 2.63 67 1.34 34 1.63 41.38 10 4.00 102 1.22 31 10-24.63.29 50 ¹ ₂ 15 2.63 67 1.34 34 1.63 41.38 10 4.00 102 1.22 31 10-24.59.27 50 ³ ₄ 20 2.88 73 1.50 38 1.71 43.50 13 4.00 102 1.22 31 10-24.82.37 50 1 25 3.31 84 1.71 43 2.00 51.63 16 4.69 119 1.34 34 ¹ ₄-20 1.36.62 40 1 ¹ ₄ 32 3.84 98 1.97 50 2.06 52.81 21 4.69 119 1.50 38 ¹ ₄-20 2.01.91 20 1 ¹ ₂ 40 4.03 102 2.03 52 2.56 65 1.00 25 6.75 171 1.63 41 ¹ ₄-20 2.75 1.25 20 2 50 4.59 117 2.28 58 2.75 70 1.25 32 6.75 171 2.06 52 ¹ ₄-20 4.16 1.89 10 Note: G Holes are only tapped for actuated valves. u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 8
Bronze Ball Valves Two-Piece Body Full Port ¹ ₄"-1" Conventional Port 1¹ ₄"-3" Bronze Trim Blowout-Proof Stem 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 150 PSI/10.3 Bar Saturated Steam u Dezincification Resistant CONFORMS TO MSS SP-110 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Packing PTFE 5. Stem Silicon Bronze ASTM B 371 Alloy C69430 or ASTM B 99 Alloy C65100 6. Thrust Washer Reinforced PTFE 7. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 8. Seat Ring (2) Reinforced PTFE 9. Body Cast Red Bronze ASTM B 584 Alloy C84400 10. Body End Piece Cast Red Bronze ASTM B 584 Alloy C84400 ¹ ₄" size only has a 304 stainless steel grounding washer. C T-580-70 Threaded S-580-70 Solder B A S-580-70 C x C D T-580-70 NPT x NPT T-580-70 S-580-70 T-580-70 S-580-70 Size A A B C C D T-580-70 S-580-70 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.00 51 1.75 44 1.75 44 5.00 127 4.75 121.38 10.45.21.42.19 100 ³ ₈ 10 2.00 51 1.84 47 1.75 44 5.00 127 4.81 122.38 10.45.21.42.19 100 ¹ ₂ 15 2.44 62 2.56 65 1.88 48 5.19 132 5.25 133.50 13.64.29.60.27 100 ³ ₄ 20 2.94 75 3.25 83 2.25 57 6.25 159 6.25 159.75 19 1.33.60 1.27.58 50 1 25 3.34 85 3.75 95 2.38 60 6.44 164 6.63 168 1.00 25 1.79.81 1.72.78 40 1 ¹ ₄ 32 3.94 100 4.00 102 2.63 67 6.75 171 6.75 171 1.00 25 2.17.98 1.78.81 20 1 ¹ ₂ 40 4.31 109 4.44 113 3.00 76 8.88 226 9.00 229 1.25 32 3.27 1.48 2.87 1.30 20 2 50 4.63 118 5.50 140 3.16 80 9.06 230 9.50 241 1.50 38 5.09 2.31 4.60 2.08 10 2 ¹ ₂ 65 5.84 148 7.28 185 3.50 89 9.66 245 10.38 264 2.00 51 8.25 3.74 8.18 3.71 6 3 80 7.09 180 8.78 223 4.41 112 11.53 293 12.38 314 2.50 64 15.65 7.10 14.86 6.74 4 NIBCO supplies Full Port T or S-585-70 on this size. Note: Solder end is designed to be soft-soldered into lines using solders with the melting point not exceeding 500 F. Higher temperature solders will damage the seat material. See installation sheet packaged with valves. LEAD FREE OPTION AVAILABLE u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 9
Bronze Ball Valves Two-Piece Body Full Port ¹ ₄"-1" Conventional Port 1¹ ₄"-3" Stainless Trim Blowout-Proof Stem Vented Ball 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 150 PSI/10.3 Bar Saturated Steam u Dezincification Resistant CONFORMS TO MSS SP-110 1. Handle Nut Stainless Steel 300 Series 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Packing PTFE 5. Stem Stainless Steel ASTM A 276 Type 316 6. Thrust Washer Reinforced PTFE 7. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 8. Seat Ring (2) Reinforced PTFE 9. Body Bronze ASTM B 584 Alloy C84400 10. Body End Piece Bronze ASTM B 584 Alloy C84400 ¹ ₄" size only has a 304 stainless steel grounding washer. C T-580-70-66 Threaded S-580-70-66 Solder B A S-580-70-66 C x C D T-580-70-66 NPT x NPT T-580-70-66 S-580-70-66 T-580-70-66 S-580-70-66 Size A A B C C D T-580-70-66 S-580-70-66 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.00 51 1.75 44 1.75 44 5.00 127 4.75 121.38 10.45.21.42.19 100 ³ ₈ 10 2.00 51 1.84 47 1.75 44 5.00 127 4.81 122.38 10.45.21.42.19 100 ¹ ₂ 15 2.44 62 2.56 65 1.88 48 5.19 132 5.25 133.50 13.64.29.60.27 100 ³ ₄ 20 2.94 75 3.25 83 2.25 57 6.25 159 6.25 159.75 19 1.33.60 1.27.58 50 1 25 3.34 85 3.75 95 2.38 60 6.44 164 6.63 168 1.00 25 1.79.81 1.72.78 40 1 ¹ ₄ 32 3.94 100 4.00 102 2.63 67 6.75 171 6.75 171 1.00 25 2.33 1.06 1.94.88 20 1 ¹ ₂ 40 4.31 109 4.44 113 3.00 76 8.88 226 9.00 229 1.25 32 3.49 1.58 3.10 1.40 20 2 50 4.63 118 5.50 140 3.16 80 9.06 230 9.50 241 1.50 38 5.16 2.34 4.67 2.12 10 2 ¹ ₂ 65 5.84 148 7.28 185 3.50 89 9.66 245 10.38 264 2.00 51 8.98 4.07 8.92 4.04 6 3 80 7.09 180 8.78 223 4.41 112 11.53 293 12.38 314 2.50 64 17.38 7.88 16.59 7.52 4 NIBCO supplies Full Port T or S-585-70-66 on this size. LEAD FREE OPTION AVAILABLE Note: Solder end is designed to be soft-soldered into lines using solders with the melting point not exceeding 500 F. Higher temperature solders will damage the seat material. See installation sheet packaged with valves. u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 10
Bronze Ball Valves Two-Piece Body Full Port Bronze Trim Blowout-Proof Stem Dezincification Resistant 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 150 PSI/10.3 Bar Saturated Steam u CONFORMS TO MSS SP-110 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Packing PTFE 5. Stem Silicon Bronze ASTM B 371 Alloy C69300 or ASTM B 99 Alloy C65100 6. Thrust Washer Reinforced PTFE 7. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 8. Seat Ring (2) Reinforced PTFE 9. Body Cast Red Bronze ASTM B 584 Alloy C84400 10. Body End Piece Cast Red Bronze ASTM B 584 Alloy C84400 ¹ ₄" size only has a 304 stainless steel grounding washer. C T-585-70 Threaded S-585-70 Solder B A S-585-70 C x C D T-585-70 NPT x NPT T-585-70 S-585-70 T-585-70 S-585-70 Size A A B C C D T-585-70 S-585-70 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.00 51 1.75 44 1.75 44 5.00 127 4.75 121.38 10.45.21.42.19 100 ³ ₈ 10 2.00 51 1.84 47 1.75 44 5.00 127 4.81 122.38 10.45.21.42.19 100 ¹ ₂ 15 2.44 62 2.56 65 1.88 48 5.19 132 5.25 133.50 13.64.29.60.27 100 ³ ₄ 20 2.94 75 3.25 82 2.25 57 6.25 159 6.25 159.75 19 1.33.60 1.27.58 50 1 25 3.34 85 3.75 95 2.38 60 6.44 164 6.63 168 1.00 25 1.79.81 1.72.78 40 1 ¹ ₄ 32 4.19 106 5.06 128 3.00 76 6.75 171 7.19 183 1.25 32 3.12 1.41 3.18 1.44 20 1 ¹ ₂ 40 4.72 120 5.99 151 3.16 80 9.06 230 9.69 246 1.50 38 4.78 2.17 5.12 2.32 10 2 50 5.16 131 6.72 170 3.50 89 9.25 235 10.06 256 2.00 51 6.68 3.03 7.10 3.22 8 Note: Solder end is designed to be soft-soldered into lines using solders with the melting point not exceeding 500 F. Higher temperature solders will damage the seat material. See installation sheet packaged with valves. LEAD FREE OPTION AVAILABLE u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 11
Bronze Ball Valves Two-Piece Body Full Port Stainless Trim Blowout-Proof Stem Vented Ball 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 150 PSI/10.3 Bar Saturated Steam u Dezincification Resistant CONFORMS TO MSS SP-110 1. Handle Nut Stainless Steel 300 Series 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Packing PTFE 5. Stem Stainless Steel ASTM A 276 Type 316 6. Thrust Washer Reinforced PTFE 7. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 8. Seat Ring (2) Reinforced PTFE 9. Body Bronze ASTM B 584 Alloy C84400 10. Body End Piece Bronze ASTM B 584 Alloy C84400 ¹ ₄" size only has a 304 stainless steel grounding washer. C T-585-70-66 Threaded S-585-70-66 Solder B A S-585-70-66 C x C T-585-70-66 NPT x NPT T-585-70-66 S-585-70-66 T-585-70-66 S-585-70-66 Size A A B C C D T-585-70-66 S-585-70-66 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.00 51 1.75 44 1.75 44 5.00 127 4.75 121.38 10.45.21.42.19 100 ³ ₈ 10 2.00 51 1.84 47 1.75 44 5.00 127 4.81 122.38 10.45.21.42.19 100 ¹ ₂ 15 2.44 62 2.56 65 1.88 48 5.19 132 5.25 133.50 13.64.29.60.27 100 ³ ₄ 20 2.94 75 3.25 82 2.25 57 6.25 159 6.25 159.75 19 1.33.60 1.27.58 50 1 25 3.34 85 3.75 95 2.38 60 6.44 164 6.63 168 1.00 25 1.79.81 1.72.78 40 1 ¹ ₄ 32 4.19 106 5.06 128 3.00 76 6.75 171 7.19 183 1.25 32 3.34 1.52 3.40 1.55 20 1 ¹ ₂ 40 4.72 120 5.99 151 3.16 80 9.06 230 9.69 246 1.50 38 4.84 2.20 5.18 2.35 10 2 50 5.16 131 6.72 170 3.50 89 9.25 235 10.06 256 2.00 51 7.41 3.37 7.83 3.56 8 Note: Solder end is designed to be soft-soldered into lines using solders with the melting point not exceeding 500 F. Higher temperature solders will damage the seat material. See installation sheet packaged with valves. D LEAD FREE OPTION AVAILABLE u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 12
Bronze Ball Valves Two-Piece Body Full Port Bronze Trim Thread x Solder (TS) or Solder x Thread End (ST) Blowout-Proof Stem 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 150 PSI/10.3 Bar Saturated Steam u Dezincification Resistant CONFORMS TO MSS SP-110 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Packing PTFE 5. Stem Silicon Bronze ASTM B 371 Alloy C69300 or ASTM B99 Alloy C65100 6. Thrust Washer Reinforced PTFE 7. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 8. Seat Ring (2) Reinforced PTFE 9. Body Bronze ASTM B 584 Alloy C84400 10. Body End Piece Bronze ASTM B 584 Alloy C84400 TS-585-70 Threaded x Solder ST-585-70 Solder x Threaded C B A ST-585-70 NPT x C D TS-585-70 NPT x C TS-585-70 ST-585-70 TS-585-70 ST-585-70 Size A A B C C D TS-585-70 ST-585-70 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Ctn. Qty. ¹ ₂ 15 2.55 65 2.40 61 1.88 48 5.19 132 5.25 133.50 13.71.32.62.28 100 ³ ₄ 20 3.06 78 3.09 78 2.25 57 6.25 159 6.25 159.75 19 1.31.60 1.29.59 50 1 25 3.53 90 3.53 90 2.38 60 6.44 164 6.63 168 1.00 25 2.36 1.07 2.35 1.07 40 1 ¹ ₄ 32 4.61 117 4.63 118 3.00 76 6.75 171 7.19 183 1.25 32 3.11 1.41 3.18 1.44 20 1 ¹ ₂ 40 5.32 135 5.32 135 3.16 80 9.06 230 9.69 246 1.50 38 4.82 2.18 5.07 2.30 10 2 50 5.93 151 5.93 151 3.50 89 9.25 235 10.06 256 2.00 51 6.59 2.99 6.34 2.87 8 Note: Solder end is designed to be soft-soldered into lines using solders with the melting point not exceeding 500 F. Higher temperature solders will damage the seat material. See installation sheet packaged with valves. u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 13
Bronze Ball Valves Two-Piece Body Full Port Bronze Trim Male x Female Thread Ends Blowout-Proof Stem 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 150 PSI/10.3 Bar Saturated Steam u CONFORMS TO MSS SP-110 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Packing PTFE 5. Thrust Washer Reinforced PTFE 6. Stem Silicon Bronze ASTM B 371 Alloy C69300 or ASTM B 99 Alloy C65100 7. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 8. Seat Ring (2) Reinforced PTFE 9. Body Bronze ASTM B 584 Alloy C84400 10. Male Body End Brass ASTM B 16 Alloy C36000 11. Cap Plug Low Density Polyethylene MTT-585-70 Male x Female NPT Size A B C D MTT-585-70 Master In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.41 61 5.30 135 1.75 44.38 10.43.19 40 ³ ₈ 10 2.40 61 5.30 135 1.72 44.38 10.52.24 40 ¹ ₂ 15 2.80 71 5.50 140 1.88 48.50 13.78.35 40 ³ ₄ 20 3.40 86 6.59 167 2.25 57.75 19 1.54.70 20 1 25 4.00 102 6.99 178 2.38 60 1.00 25 2.71 1.23 20 1 ¹ ₄ 32 4.58 116 9.18 233 3.00 76 1.25 32 3.56 1.62 10 1 ¹ ₂ 40 5.20 132 9.53 242 3.16 80 1.50 38 5.34 2.42 6 2 50 5.49 139 9.61 244 3.50 89 2.00 51 6.83 3.10 4 MTT-585-70 Male x Female NPT u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 14
Bronze Ball Valves Two-Piece Body Full Port Bronze Trim Body with Chrome Plating Blowout-Proof Stem 600 PSI/41.4 Bar Non-Shock Cold Working Pressure u Dezincification Resistant CONFORMS TO MSS SP-110 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Packing PTFE 5. Stem Silicon Bronze ASTM B 371 Alloy C69300 or ASTM B 99 Alloy C65100 6. Thrust Washer Reinforced PTFE 7. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 8. Seat Ring (2) Reinforced PTFE 9. Body Chrome Plated Bronze ASTM B 584 Alloy C84400 10. Body End Piece Chrome Plated Bronze ASTM B 584 Alloy C84400 1/4" and 3/8" sizes have a 304 stainless steel grounding washer. T-585-70-CP Threaded Size A B C D T-585-70-CP Master In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.00 51 1.75 44 5.00 127.38 10.45.21 100 ³ ₈ 10 2.00 51 1.75 44 5.00 127.38 10.45.20 100 ¹ ₂ 15 2.44 62 1.88 48 5.19 132.50 13.64.29 100 ³ ₄ 20 2.94 75 2.25 57 6.25 159.75 19 1.42.64 50 1 25 3.34 85 2.38 60 6.44 164 1.00 25 1.79.81 40 1 ¹ ₄ 32 4.19 106 3.00 76 6.75 171 1.25 32 3.12 1.41 20 1 ¹ ₂ 40 4.72 120 3.16 80 9.06 230 1.50 38 4.78 2.17 10 2 50 5.16 131 3.50 89 9.25 235 2.00 51 6.68 3.03 8 T-585-70-CP NPT x NPT u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 15
Bronze Ball Valves Two-Piece Body Full Port Bronze Trim ³ ₄" Hose Connection with Cap and Chain Blowout-Proof Stem 600 PSI/41.4 Bar Non-Shock Cold Working Pressure u CONFORMS TO MSS SP-110 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Packing PTFE 5. Thrust Washer Reinforced PTFE 6. Stem Silicon Bronze ASTM B 371 Alloy C69300 or ASTM B 99 Alloy C65100 7. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 8. Seat Ring (2) Reinforced PTFE 9. Body Bronze ASTM B 584 Alloy C84400 10. Hose Body End ASTM B 124 Alloy C37700 11. 1 Cap Die Cast Brass 12. Gasket Rubber 13. Chain Brass 1 Cap is for hose end thread protection only. Not to be used for pressure containing purposes. T-585-70-HC Threaded x Hose S-585-70-HC Solder x Hose S-585-70-HC C x Hose T-585-70-HC NPT x Hose T-585-70-HC S-585-70-HC T-585-70-HC S-585-70-HC Size A A B C C D T-585-70-HC S-585-70-HC Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Ctn. Qty. ¹ ₂ 15 2.84 72 2.90 74 1.88 48 5.19 132 5.25 133.50 13.80.36.74.34 100 ³ ₄ 20 3.31 84 3.47 88 2.25 57 6.25 159 6.25 159.75 19 1.46.66 1.42.65 50 Note: Solder end is designed to be soft-soldered into lines using solders with the melting point not exceeding 500 F. Higher temperature solders will damage the seat material. See installation sheet packaged with valves. LEAD FREE OPTION AVAILABLE u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 16
Bronze Ball Valves Two-Piece Body Full Port Stainless Trim ³ ₄" Hose Connection with Cap and Chain Blowout-Proof Stem 600 PSI/41.4 Bar Non-Shock Cold Working Pressure u T-585-70-66-HC Threaded x Hose CONFORMS TO MSS SP-110 1. Handle Nut Stainless Steel 300 Series 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Packing PTFE 5. Thrust Washer Reinforced PTFE 6. Stem Stainless Steel ASTM A 276 Type 316 7. Ball Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 8. Seat Ring (2) Reinforced PTFE 9. Body Bronze ASTM B 584 Alloy C84400 10. Hose Body End ASTM B 124 Alloy C37700 11. 1 Cap Die Cast Brass 12. Gasket Rubber 13. Chain Brass 1 Cap is for hose end thread protection only. Not to be used for pressure containing purposes. S-585-70-66-HC C x Hose S-585-70-66-HC C x Hose T-585-70-66-HC NPT x Hose LEAD FREE OPTION AVAILABLE T-585-70-66-HC S-585-70-66-HC T-585-70-66-HC S-585-70-66-HC Size A A B C C D T-585-70-66-HC S-585-70-66-HC Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Ctn. Qty. ¹ ₂ 15 2.84 72 2.90 74 1.88 48 5.19 132 5.25 133.50 13.80.36.74.34 100 ³ ₄ 20 3.31 84 3.47 88 2.25 57 6.25 159 6.25 159.75 19 1.46.66 1.42.65 50 Note: Solder end is designed to be soft-soldered into lines using solders with the melting point not exceeding 500 F. Higher temperature solders will damage the seat material. See installation sheet packaged with valves. u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 17
Bronze Ball Valves Two-Piece Body Full Port Bronze Trim Single Union Ends Blowout-Proof Stem 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 150 PSI/10.3 Saturated Steam u * CONFORMS TO MSS SP-110 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Packing PTFE 5. Thrust Washer Reinforced PTFE 6. Stem Silicon Bronze ASTM B 371 Alloy C69300 or ASTM B 99 Alloy C65100 7. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 8. Seat Ring (2) Reinforced PTFE 9. O-Ring FKM 10. Tail Piece ASTM B 124 Alloy C37700 11. Union Nut ASTM B 124 Alloy C37700 or ASTM B 584 Alloy C84400 12. Body End ASTM B 124 Alloy C37700 13. Body Bronze ASTM B 584 Alloy C84400 T-585-70-SU NPT x NPT S-585-70-SU C x C T-585-70-SU NPT x NPT S-585-70-SU C x C T-585-70-SU S-585-70-SU T-585-70-SU S-585-70-SU Size A A B C C D T-585-70-SU S-585-70-SU Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Ctn. Qty. ¹ ₂ 15 3.57 91 3.32 84 1.88 48 6.22 158 6.00 152.50 13.64.29.60.27 40 ³ ₄ 20 4.13 105 4.20 107 2.25 57 7.28 185 7.25 184.75 19 1.33.60 1.27.58 20 1 25 4.70 119 5.00 127 2.38 60 7.66 195 7.83 199 1.00 25 1.79.81 1.72.78 20 1 ¹ ₄ 32 5.38 137 6.09 155 3.00 76 9.97 253 10.23 260 1.25 32 2.17.98 3.18 1.44 10 1 ¹ ₂ 40 6.06 154 7.09 180 3.16 80 10.40 264 10.81 275 1.50 38 3.27 1.48 5.12 2.32 6 2 50 6.38 162 7.66 195 3.50 89 10.50 267 10.97 279 2.00 51 5.09 2.31 7.10 3.22 4 * Consult MSS SP123 for pressure temperature limitations u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 18
Bronze Ball Valves Two-Piece Body Full Port Bronze Trim Single Union Ends Blowout-Proof Stem 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 150 PSI/10.3 Bar Saturated Steam u * CONFORMS TO MSS SP-110 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Packing PTFE 5. Thrust Washer Reinforced PTFE 6. Stem Silicon Bronze ASTM B 371 Alloy C69300 or ASTM B 99 Alloy C65100 7. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 8. Seat Ring (2) Reinforced PTFE 9. O-Ring FKM 10. Tail Piece ASTM B 124 Alloy C37700 11. Union Nut ASTM B 124 Alloy C37700 or ASTM B 584 Alloy C84400 12. Body End ASTM B 124 Alloy C37700 13. Body Bronze ASTM B 584 Alloy C84400 TS-585-70-SU Threaded x Solder ST-585-70-SU Solder x Threaded TS-585-70-SU NPT x C ST-585-70-SU C x NPT ST-585-70-SU TS-585-70-SU ST-585-70-SU TS-585-70-SU Size A A B C C D ST-585-70-SU TS-585-70-SU Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Ctn. Qty. ¹ ₂ 15 3.53 90 3.21 82 1.88 48 6.22 158 6.00 152.50 132 1.21.55 1.21.55 40 ³ ₄ 20 4.22 107 4.10 104 2.25 57 7.28 185 7.25 184.75 19 1.84.84 1.84.84 20 1 25 4.86 123 4.91 125 2.38 60 7.66 195 7.83 199 1.00 25 2.91 1.32 2.91 1.32 20 1 ¹ ₄ 32 5.79 147 5.63 143 3.00 76 9.97 253 10.23 260 1.25 32 4.39 2.00 4.39 2.00 10 1 ¹ ₂ 40 6.63 168 6.28 160 3.16 80 10.40 264 10.81 275 1.50 38 6.44 2.93 6.44 2.93 6 2 50 7.10 180 6.89 175 3.50 89 10.50 267 10.91 277 2.00 51 9.44 4.29 9.44 4.29 4 * Consult MSS SP123 for pressure temperature limitations u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 19
Bronze Ball Valves Two-Piece Body 250 Steam Rating Full Port 316SS Trim Carbon-Filled PTFE Seats Blowout-Proof Stem Vented Ball 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 250 PSI/17.2 Bar Saturated Steam u Dezincification Resistant CONFORMS TO MSS SP-110 1. Handle Nut 300 Series Stainless Steel 2. Handle Stainless Steel Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Packing Carbon Filled PTFE 5. Thrust Washer Carbon Filled PTFE 6. Stem Stainless Steel ASTM A 276 Type 316 7. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 8. Seat Ring (2) Carbon Filled PTFE 9. Body Bronze ASTM B 61 Alloy C92200 10. Body End Piece Bronze ASTM B 584 Alloy C84400 T-585-70-66-ST Threaded Size A B C D T-585-70-66-ST Master In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₂ 15 2.44 62 1.88 48 5.19 132.50 13.64.29 10 ³ ₄ 20 2.94 75 2.25 57 6.25 159.75 19 1.33.60 5 1 25 3.34 85 2.38 61 6.44 164 1.00 25 1.79.81 5 1 ¹ ₄ 32 4.19 106 3.00 76 6.75 171 1.25 32 2.17.98 5 1 ¹ ₂ 40 4.72 120 3.16 80 9.06 230 1.50 38 3.27 1.48 5 2 50 5.16 131 3.50 89 9.25 235 2.00 51 5.09 2.31 2 T-585-70-66-ST NPT x NPT u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 20
Bronze Ball Valves Two-Piece Body Full Port ¹ ₄"-1" Conventional Port 1¹ ₄"-2" Bronze Trim Safety Vent for Pneumatic Applications Blowout-Proof Stem 600 PSI/41.4 Bar Non-Shock Cold Working Pressure Dezincification Resistant O.S.H.A. 1910.147 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Packing PTFE 5. Stem Silicon Bronze ASTM B 371 Alloy C69430 or C69300 or ASTM B 99 Alloy C65100 6. Thrust Washer Reinforced PTFE 7. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 8. Seat Ring (2) Reinforced PTFE 9. Body Bronze ASTM B 584 Alloy C84400 10. Body End Piece Bronze ASTM B 584 Alloy C84400 11. Locking Device 300 Series Stainless Steel Note: A Buna O-ring is installed on the upstream side behind the seat ring. Maximum temperature of Buna is 180 F. (Not Shown) T-585-70-SV ¹ ₄"-1" Full Port Threaded T-580-70-SV 1¹ ₄"-2" Conventional Port Threaded T-585-70-SV Size A B C D T-580-70-SV Master In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.00 51 1.75 44 5.00 127.38 10.49.22 100 ³ ₈ 10 2.00 51 1.75 44 5.00 127.38 10.48.22 100 ¹ ₂ 15 2.44 62 1.88 48 5.19 132.50 13.68.31 100 ³ ₄ 20 2.94 75 2.25 57 6.25 159.75 19 1.38.63 50 1 25 3.34 85 2.38 60 6.44 164 1.00 25 1.99.90 40 1 ¹ ₄ 32 3.94 100 2.63 67 6.75 171 1.00 25 2.37 1.07 20 1 ¹ ₂ 40 4.31 109 3.00 76 8.88 226 1.25 32 3.57 1.62 20 2 50 4.63 118 3.16 80 9.06 230 1.50 38 5.20 2.36 10 NIBCO T-585-70-SV Safety Vent lock-out ball valves provide positive energy isolation per O.S.H.A. standard 1910.147. Valves lock in closed position only. For compressed air. To order specify T-585-70-SV/T-580-70-SV. NIBCO Supplies Full Port T-585-70-SV on this size. T-585-70-SV T-580-70-SV NPT x NPT 21
Bronze Ball Valves Two-Piece Body Full Port ¹ ₄"-1" Conventional Port 1¹ ₄"-3" Bronze Trim Blowout-Proof Stem UL Listed 250 PSI/17.2 Bar Non-Shock LP Gas per UL842 Dezincification Resistant CONFORMS TO MSS SP-110 CSA certified to ANSI/ASME B 16.33 and CGA 3.16 for Natural and Propane Gas to 125 PSIG (¹ ₄"-1") 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Packing PTFE 5. Stem Silicon Bronze ASTM B 371 Alloy C69430 or ASTM B 99 Alloy C65100 6. Thrust Washer Reinforced PTFE 7. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 8. Seat Ring (2) Reinforced PTFE 9. Body Bronze ASTM B 584 Alloy C84400 10. Body End Piece Bronze ASTM B 584 Alloy C84400 T-585-70-UL ¹ ₄"-1" Full Port CSA Threaded T-580-70-UL 1¹ ₄"-3" Conventional Port Threaded UL Only UL Listed For: YSDT LP gas shut-off YQNZ Compressed gas shut-off YRPV Gas shut-off YRBX Flammable liquid shut-off MHKZ Manual valves CUL Listed For: YSDT7 LP gas shut-off for Canada Service A - Air or non-toxic, non-flammable gas G - City gas supplied by public utilities GA - Gasoline LP - Liquified petroleum gas, 250 PSI max. 02 - No. 1 and 2 fuel oil 04 - No. 4 fuel oil 05 - No. 5 fuel oil 06 - No. 6 fuel oil T-585-70-UL Size A B C D T-580-70-UL Master In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.00 51 1.75 44 5.00 127.38 10.45.21 100 ³ ₈ 10 2.00 51 1.75 44 5.00 127.38 10.45.20 100 ¹ ₂ 15 2.44 62 1.88 48 5.19 132.50 13.64.29 100 ³ ₄ 20 2.94 75 2.25 57 6.25 159.75 19 1.33.60 50 1 25 3.34 85 2.38 60 6.44 164 1.00 25 1.79.81 40 1 ¹ ₄ 32 3.94 100 2.63 67 6.75 171 1.00 25 2.17.98 20 1 ¹ ₂ 40 4.31 109 3.00 76 8.88 226 1.25 32 3.27 1.48 20 2 50 4.63 118 3.16 80 9.06 230 1.50 38 5.09 2.31 10 2 ¹ ₂ 65 5.84 148 3.50 89 9.66 245 2.00 51 8.25 3.74 6 3 80 7.09 180 4.41 112 11.53 293 2.50 64 15.65 7.10 4 NIBCO Supplies Full Port T-585-70-UL on this size. T-585-70-UL T-580-70-UL NPT x NPT 22
Bronze Ball Valves Two-Piece Body Full Port 316SS Trim Blowout-Proof Stem ISO Direct-Mount Pad for Actuation Vented Ball 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 150 PSI/10.3 Bar Saturated Steam u Dezincification Resistant CONFORMS TO MSS SP-110 Actuator Mount per ISO 5211 1. Stem Stainless Steel ASTM A 276 Type 316 2. O-Ring (2) Fluoroelastomer 3. Thrust Washer Reinforced PTFE 4. Seat Ring (2) Carbon Filled PTFE 5. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 6. Body Bronze ASTM B 584 Alloy C84400 7. Body End Piece Bronze ASTM B 584 Alloy C84400 TM-585-70-66 Threaded with Mounting Pads TM-585-70-66 NPT x NPT Size Flange A B C D E F G H TM-585-70-66 Master In. mm. Size In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₂ 15 F03.50 13 2.43 62 1.10 28.35 9 1.42 36.22 5.6.39 10.12 3.82.37 50 ³ ₄ 20 F03.75 19 2.94 75 1.37 35.35 9 1.42 36.22 5.6.39 10.12 3 1.23.56 25 1 25 F04 1.00 25 3.33 85 1.56 40.43 11 1.65 42.22 5.6.47 12.12 3 1.88.85 20 1 ¹ ₄ 32 F04 1.25 32 4.19 106 2.04 52.43 11 1.65 42.22 5.6.47 12.16 4 3.06 1.39 10 1 ¹ ₂ 40 F04 1.50 38 4.70 119 2.27 58.43 11 1.65 42.22 5.6.47 12.16 4 4.45 2.02 10 2 50 F05 2.00 51 5.15 131 2.50 64.55 14 1.97 50.27 6.8.63 16.16 4 6.85 3.11 6 2 ¹ ₂ 65 F05 2.00 51 5.84 148 2.50 64.55 14 1.97 50.27 6.8.63 16.16 4 9.00 4.06 1 NIBCO Supplies TM-580-70-66 Conventional Port Valves. u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 23
Bronze Ball Valves Three-Way Body Full Port ¹ ₂"-1" Conventional Port 1¹ ₄"-2" 3-Way Bronze Ball Valve Bronze Trim Blowout-Proof Stem Dezincification Resistant 400 PSI/27.6 Bar Non-Shock Cold Working Pressure T-585-70-W3 Threaded CONFORMS TO MSS SP-110 1. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 2. Handle Nut Stainless Steel 300 Series 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Packing PTFE 5. Thrust Washer Reinforced PTFE 6. Stem Brass ASTM B 16 Alloy C36000 7. Seat Ring (2) Reinforced PTFE 8. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 9. Body Bronze ASTM B 584 Alloy C84400 10. Body End Piece Bronze ASTM B 584 Alloy C84400 S-585-70-W3 Solder Flow Pattern Lever Position Note: Open port pressure must exceed closed port pressure. If closed port pressure exceeds open port pressure, ball may be forced off of the seat ring which could allow mixing from all ports. T-585-70-W3 NPT x NPT T-585-70-W3 Size A B C D E F G H I J T-585-70-W3 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₂ 15 2.44 62 1.88 48 5.19 132.50 13 1.22 31.69 18.88 22.65 17.51 13 1.45 37.84.38 50 ³ ₄ 20 2.94 75 2.25 57 6.25 159.75 19 1.45 37.69 18.88 22.85 22.57 14 1.80 46 1.62.73 25 1 25 3.34 85 2.38 60 6.44 164 1.00 25 1.69 43.69 18.88 22 1.05 27.57 14 1.97 50 2.28 1.03 20 1 ¹ ₄ 32 4.19 106 3.00 76 6.75 171 1.12 28 1.98 50.75 19.94 24 1.23 31.87 22 2.60 66 4.19 1.90 10 1 ¹ ₂ 40 4.72 120 3.16 80 9.06 230 1.38 35 2.38 60.75 19.94 24 1.48 38.87 22 2.84 72 6.00 2.72 8 2 50 5.31 135 3.50 89 9.25 235 1.88 48 2.75 70.75 19.94 24 1.88 48.70 18 3.14 80 9.03 4.09 4 NIBCO supplies conventional port T-580-70-W3 on this size. S-585-70-W3 Size A B C D E J S-585-70-W3 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₂ 15 2.56 65 1.88 48 5.19 132.50 13 1.08 27 1.45 37.67.30 50 ³ ₄ 20 3.25 83 2.25 57 6.25 159.75 19 1.50 38 1.80 46 1.35.61 25 1 25 3.75 95 2.38 60 6.63 168 1.00 25 1.85 47 1.97 50 2.07.94 20 S-585-70-W3 C x C 24
Bronze Ball Valves Three-Way Body Full Port ¹ ₂"-1" Conventional Port 1¹ ₄"-2" 3-Way Bronze Ball Valve 316SS Trim Blowout-Proof Stem Vented Ball 400 PSI/27.6 Bar Non-Shock Cold Working Pressure T-585-70-66-W3 Threaded Dezincification Resistant CONFORMS TO MSS SP-110 1. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 2. Handle Nut Stainless Steel 300 Series 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Packing PTFE 5. Thrust Washer Reinforced PTFE 6. Stem Stainless Steel ASTM A 276 Type 316 7. Seat Ring (2) Reinforced PTFE 8. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 9. Body Bronze ASTM B 584 Alloy C84400 10. Body End Piece Bronze ASTM B 584 Alloy C84400 S-585-70-66-W3 Solder Flow Pattern Lever Position Note: Open port pressure must exceed closed port pressure. If closed port pressure exceeds open port pressure, ball may be forced off of the seat ring which could allow mixing from all ports. T-585-70-66-W3 NPT x NPT S-585-70-66-W3 C x C T-585-70-66- W3 Size A B C D E F G H I J T-585-70-66-W3 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₂ 15 2.44 62 1.88 48 5.19 132.50 13 1.22 31.69 18.88 22.65 17.51 13 1.45 37.84.38 50 ³ ₄ 20 2.94 75 2.25 57 6.25 159.75 19 1.45 37.69 18.88 22.85 22.57 14 1.80 46 1.62.73 25 1 25 3.34 85 2.38 60 6.44 164 1.00 25 1.69 43.69 18.88 22 1.05 27.57 14 1.97 50 2.28 1.03 20 1 ¹ ₄ 32 4.19 106 3.00 76 6.75 171 1.12 28 1.98 50.75 19.94 24 1.23 31.87 22 2.60 66 4.19 1.90 10 1 ¹ ₂ 40 4.72 120 3.16 80 9.06 230 1.38 35 2.38 60.75 19.94 24 1.48 38.87 22 2.84 72 6.00 2.72 8 2 50 5.31 135 3.50 89 9.25 235 1.88 48 2.75 70.75 19.94 24 1.88 48.70 18 3.14 80 9.03 4.09 4 NIBCO supplies conventional port T-580-70-66-W3 on this size. S-585-70-66-W3 Size A B C D E J S-585-70-66-W3 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₂ 15 2.56 65 1.88 48 5.19 132.50 13 1.08 27 1.45 37.67.30 50 ³ ₄ 20 3.25 83 2.25 57 6.25 159.75 19 1.50 38 1.80 46 1.35.61 25 1 25 3.75 95 2.38 60 6.63 168 1.00 25 1.85 47 1.97 50 2.07.94 20 25
Bronze Ball Valves Three-Piece Body Full Port ¹ ₄"-1" Conventional Port 1¹ ₄"-3" Bronze Trim Blowout-Proof Stem Dezincification Resistant 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 150 PSI/10.3 Bar Saturated Steam u CONFORMS TO MSS SP-110 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Stem Silicon Bronze ASTM B 371 Alloy C69430 or ASTM B 99 Alloy C65100 5. Body Bronze ASTM B 584 Alloy C84400 6. Packing PTFE 7. Body End (2) Bronze ASTM B 584 Alloy C84400 8. O-Ring Seal (2) Fluorocarbon Rubber 9. Seat Ring (2) PTFE 10. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 11. Thrust Washer Reinforced PTFE 12. Body Bolts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 13. Body Nuts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 Note: Valves are static grounded by grounding washer. (Not Shown) T-590-Y Threaded S-590-Y Solder T-590-Y NPT x NPT T-590-Y S-590-Y S-590-Y Size A A B C D E F T-590-Y S-590-Y Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.50 64 1.69 43 1.81 46.38 10 1.69 43 3.91 99 1.13 29 1.03.47.89.40 50 ³ ₈ 10 2.50 64 1.81 46 1.81 46.38 10 1.69 43 3.91 99 1.13 29.98.44.89.40 50 ¹ ₂ 15 2.50 64 2.06 52 1.81 46.50 13 1.69 43 3.91 99 1.13 29 1.03.47.89.40 50 ³ ₄ 20 3.00 76 2.94 75 1.94 49.75 19 2.00 51 4.66 118 1.44 37 1.70.77 1.59.72 30 1 25 3.69 94 3.66 93 2.50 64 1.00 25 2.25 57 4.66 118 1.84 47 2.82 1.28 2.55 1.15 20 1 ¹ ₄ 32 3.69 94 3.84 98 2.50 64 1.00 25 2.25 57 4.66 118 1.88 48 2.65 1.20 2.38 1.08 20 1 ¹ ₂ 40 4.09 104 4.25 108 2.69 68 1.25 32 2.75 70 6.69 170 2.03 52 3.77 1.71 3.42 1.55 10 2 50 4.81 122 5.25 133 3.00 76 1.50 38 2.97 75 6.69 170 2.56 65 5.78 2.62 5.31 2.41 10 2 ¹ ₂ 65 6.16 157 6.12 155 4.00 102 2.00 51 3.63 92 6.69 170 3.19 81 10.75 4.88 9.92 4.50 4 3 80 6.84 174 7.44 189 5.00 127 2.50 64 4.09 104 8.00 203 4.13 105 19.14 8.68 17.93 8.13 2 NIBCO supplies full port T or S-595-Y on this size. u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. S-590-Y C x C 26
Bronze Ball Valves Three-Piece Body Full Port ¹ ₄"-1" Conventional Port 1¹ ₄"-3" 316SS Trim Blowout-Proof Stem Vented Ball Dezincification Resistant 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 150 PSI/10.3 Bar Saturated Steam u CONFORMS TO MSS SP-110 1. Handle Nut Stainless Steel 300 Series 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Stem Stainless Steel ASTM A 276 Type 316 5. Body Bronze ASTM B 584 Alloy C84400 6. Packing PTFE 7. Body End (2) Bronze ASTM B 584 Alloy C84400 8. O-Ring Seal (2) Fluorocarbon Rubber 9. Seat Ring (2) PTFE 10. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 11. Thrust Washer Reinforced PTFE 12. Body Bolts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 13. Body Nuts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 Note: Valves are static grounded by a grounding washer. (Not Shown) T-590-Y-66 Threaded S-590-Y-66 Solder T-590-Y-66 NPT x NPT S-590-Y-66 C x C T-590-Y-66 S-590-Y-66 S-590-Y-66 Size A A B C D E F T-590-Y -66 S-590-Y-66 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.50 64 1.69 43 1.81 46.38 10 1.69 43 3.91 99 1.13 29 1.03.47.89.40 50 ³ ₈ 10 2.50 64 1.81 46 1.81 46.38 10 1.69 43 3.91 99 1.13 29.98.44.89.40 50 ¹ ₂ 15 2.50 64 2.06 52 1.81 46.50 13 1.69 43 3.91 99 1.13 29 1.03.47.89.40 50 ³ ₄ 20 3.00 76 2.94 75 1.94 49.75 19 2.00 51 4.66 118 1.44 37 1.70.77 1.59.72 30 1 25 3.69 94 3.66 93 2.50 64 1.00 25 2.25 57 4.66 118 1.84 47 2.82 1.28 2.55 1.15 20 1 ¹ ₄ 32 3.69 94 3.84 98 2.50 64 1.00 25 2.25 57 4.66 118 1.88 48 2.65 1.20 2.38 1.08 20 1 ¹ ₂ 40 4.09 104 4.25 108 2.69 68 1.25 32 2.75 70 6.69 170 2.03 52 3.77 1.71 3.42 1.55 10 2 50 4.81 122 5.25 133 3.00 76 1.50 38 2.97 75 6.69 170 2.56 65 5.78 2.62 5.31 2.41 10 2 ¹ ₂ 65 6.16 157 6.12 155 4.00 102 2.00 51 3.63 92 6.69 170 3.19 81 10.75 4.88 9.92 4.50 4 3 80 6.84 174 7.44 189 5.00 127 2.50 64 4.09 104 8.00 203 4.13 105 19.14 8.68 17.93 8.13 2 NIBCO supplies full port T or S-595-Y-66 on this size. u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 27
Bronze Ball Valves Three-Piece Body Full Port ¹ ₄"-1" Conventional Port 1¹ ₄"-3" UL Listed for Flammable Liquids Blowout-Proof Stem Dezincification Resistant 175 PSI/12.1 Bar Non-Shock LP Gas per UL842 CONFORMS TO MSS SP-110 UL842 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Stem Silicon Bronze ASTM B 371 Alloy C69430 or ASTM B 99 Alloy C65100 5. Body Bronze ASTM B 584 Alloy C84400 6. Packing PTFE 7. Body End (2) Bronze ASTM B 584 Alloy C84400 8. O-Ring Seal (2) Fluorocarbon Rubber 9. Seat Ring (2) PTFE 10. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 11. Thrust Washer Reinforced PTFE 12. Body Bolts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 13. Body Nuts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 Note: Valves are static grounded by a grounding washer. (Not Shown) T-590-Y-UL Threaded UL Listed For: YQNZ Compressed gas shut-off YRPV Gas shut-off YRBX Flammable liquid shut-off MHKZ Manual valves Service A - Air or non-toxic, non-flammable gas G - City gas supplied by public utilities GA - Gasoline LP - Liquified petroleum gas, 175 PSI max. 02 - No. 1 and 2 fuel oil 04 - No. 4 fuel oil 05 - No. 5 fuel oil 06 - No. 6 fuel oil T-590-Y-UL NPT x NPT Size A B C D E T-590-Y-UL Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.50 64 1.81 46.38 10 1.06 27 3.90 99.94.43 50 ³ ₈ 10 2.50 64 1.81 46.38 10 1.06 27 3.90 99.94.43 50 ¹ ₂ 15 2.50 64 1.81 46.50 13 1.06 27 3.90 99 1.01.47 50 ³ ₄ 20 3.00 76 1.94 49.75 19 2.00 51 4.66 118 1.73.79 30 1 25 3.69 94 2.50 64 1.00 25 2.25 57 4.66 118 2.75 1.25 20 1 ¹ ₄ 32 3.69 94 2.50 64 1.00 25 2.25 57 4.66 118 2.65 1.20 20 1 ¹ ₂ 40 4.09 104 2.69 68 1.25 32 2.75 70 6.69 170 3.77 1.71 10 2 50 4.56 116 3.00 76 1.50 38 2.97 75 6.69 170 5.78 2.62 10 2 ¹ ₂ 65 6.16 156 4.00 102 2.00 51 3.63 92 6.69 170 10.75 4.88 4 3 80 6.90 175 5.00 127 2.50 64 4.09 104 8.00 203 19.14 8.68 2 NIBCO supplies full port T-595-Y-UL on this size. 28
Bronze Ball Valves Three-Piece Body Conventional Port Grooved Ends Bronze Trim Blowout-Proof Stem Dezincification Resistant 600 PSI/41.4 Bar Non-Shock Cold Working Pressure CONFORMS TO MSS SP-110 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Stem Silicon Bronze ASTM B 371 Alloy C69430 or ASTM B 99 Alloy C65100 5. Body Bronze ASTM B 584 Alloy C84400 6. Packing PTFE 7. Body End (2) Bronze ASTM B 584 Alloy C84400 8. O-Ring Seal (2) Fluorocarbon Rubber 9. Seat Ring (2) PTFE 10. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 11. Thrust Washer Reinforced PTFE 12. Body Bolts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 13. Body Nuts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 Note: Valves are static grounded by a grounding washer. (Not Shown) G-590-Y Grooved Size A B C D E G-590-Y Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. 1 ¹ ₂ 40 5.37 144 2.37 68 1.25 32 2.75 70 6.69 170 4.20 1.91 10 2 50 5.87 149 3.00 76 1.50 38 2.97 75 6.69 170 6.14 2.79 10 2 ¹ ₂ 65 6.64 169 4.00 102 2.00 51 3.62 92 6.69 170 10.80 4.91 4 3 80 7.78 198 5.00 127 2.50 64 4.09 104 6.69 170 19.01 8.64 2 G-590-Y GRVD x GRVD 29
Bronze Ball Valves Three-Piece Body Conventional Port Grooved Ends 316SS Trim Blowout-Proof Stem Vented Ball Dezincification Resistant 600 PSI/41.4 Bar Non-Shock Cold Working Pressure CONFORMS TO MSS SP-110 1. Handle Nut Stainless Steel 300 Series 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Stem Stainless Steel ASTM A 276 Type 316 5. Body Bronze ASTM B 584 Alloy C84400 6. Packing PTFE 7. Body End (2) Bronze ASTM B 584 Alloy C84400 8. O-Ring Seal (2) Fluorocarbon Rubber 9. Seat Ring (2) PTFE 10. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 11. Thrust Washer Reinforced PTFE 12. Body Bolts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 13. Body Nuts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 Note: Valves are static grounded by a grounding washer. (Not Shown) G-590-Y-66 Grooved Size A B C D E G-590-Y-66 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. 1 ¹ ₂ 40 5.37 144 2.37 68 1.25 32 2.75 70 6.69 170 4.20 1.91 10 2 50 5.87 149 3.00 76 1.50 38 2.97 75 6.69 170 6.14 2.79 10 2 ¹ ₂ 65 6.64 169 4.00 102 2.00 51 3.62 92 6.69 170 10.80 4.91 4 3 80 7.78 198 5.00 127 2.50 64 4.09 104 6.69 170 19.01 8.64 2 G-590-Y-66 GRVD x GRVD 30
Bronze Ball Valves Three-Piece Body Full Port Bronze Trim Blowout-Proof Stem Dezincification Resistant 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 150 PSI/10.3 Bar Saturated Steam u CONFORMS TO MSS SP-110 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Stem Silicon Bronze ASTM B 371 Alloy C69430 or ASTM B 99 Alloy C65100 5. Body Bronze ASTM B 584 Alloy C84400 6. Packing PTFE 7. Body End (2) Bronze ASTM B 584 Alloy C84400 8. O-Ring Seal (2) Fluorocarbon Rubber 9. Seat Ring (2) PTFE 10. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 11. Thrust Washer Reinforced PTFE 12. Body Bolts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 13. Body Nuts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 Note: Valves are static grounded by a grounding washer. (Not Shown) T-595-Y Threaded S-595-Y Solder T-595-Y NPT x NPT S-595-Y C x C T-595-Y S-595-Y S-595-Y Size A A B C D E F T-595-Y S-595-Y Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.50 64 1.69 43 1.81 46.38 10 1.69 43 3.91 99 1.13 29 1.03.47.89.40 50 ³ ₈ 10 2.50 64 1.81 46 1.81 46.38 10 1.69 43 3.91 99 1.13 29.98.44.89.40 50 ¹ ₂ 15 2.50 64 2.06 52 1.81 46.50 13 1.69 43 3.91 99 1.13 29 1.03.47.89.40 50 ³ ₄ 20 3.00 76 2.94 75 1.94 49.75 19 2.00 51 4.66 118 1.44 37 1.70.77 1.59.72 30 1 25 3.69 94 3.66 93 2.50 64 1.00 25 2.25 57 4.66 118 1.84 47 2.82 1.28 2.55 1.15 20 1 ¹ ₄ 32 4.09 104 3.91 99 2.69 68 1.25 32 2.75 70 6.69 170 1.97 50 3.96 1.80 3.61 1.64 10 1 ¹ ₂ 40 4.56 116 4.60 117 3.00 76 1.50 38 2.97 75 6.69 170 2.38 60 5.68 2.57 5.31 2.41 10 2 50 6.16 156 5.78 147 4.00 102 2.00 51 3.63 92 6.69 170 3.06 78 11.40 5.17 10.60 4.81 4 2 ¹ ₂ 65 6.84 174 6.94 176 5.00 127 2.50 64 4.09 104 8.00 203 4.00 102 21.07 9.56 19.30 8.75 2 LEAD FREE OPTION AVAILABLE u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 31
Bronze Ball Valves Three-Piece Body Full Port Bronze Trim 300 Series External Trim Blowout-Proof Stem Dezincification Resistant 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 150 PSI/10.3 Bar Saturated Steam u CONFORMS TO MSS SP-110 1. Handle Nut 300 Series Stainless Steel 2. Handle 300 Series Stainless Steel with Plastisol Grip 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Stem Silicon Bronze ASTM B 371 Alloy C69430 or ASTM B 99 Alloy C65100 5. Body Bronze ASTM B 584 Alloy C84400 6. Packing PTFE 7. Body End (2) Bronze ASTM B 584 Alloy C84400 8. O-Ring Seal (2) Fluorocarbon Rubber 9. Seat Ring (2) PTFE 10. Ball Brass ASTM B 124 Alloy C37700 or ASTM B 16 Alloy C36000 with Hard Chrome Plate 11. Thrust Washer Reinforced PTFE 12. Body Bolts 300 Series Stainless Steel 13. Body Nuts 300 Series Stainless Steel Note: Valves are static grounded by a grounding washer. (Not Shown) T-595-Y-SS Threaded T-595-Y-SS NPT x NPT Size A B C D E T-595-Y-SS Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.50 64 1.81 46.38 10 1.69 43 3.91 99 1.03.47 50 ³ ₈ 10 2.50 64 1.81 46.38 10 1.69 43 3.91 99.98.44 50 ¹ ₂ 15 2.50 64 1.81 46.50 13 1.69 43 3.91 99 1.03.47 50 ³ ₄ 20 3.00 76 1.94 49.75 19 2.00 51 4.66 118 1.70.77 30 1 25 3.69 94 2.50 64 1.00 25 2.25 57 4.66 118 2.82 1.28 20 1 ¹ ₄ 32 4.09 104 2.69 68 1.25 32 2.75 70 6.69 170 3.96 1.80 10 1 ¹ ₂ 40 4.56 116 3.00 76 1.50 38 2.97 75 6.69 170 5.68 2.57 10 2 50 6.16 156 4.00 102 2.00 51 3.63 92 6.69 170 11.40 5.17 4 2 ¹ ₂ 65 6.84 174 5.00 127 2.50 64 4.09 104 8.00 203 21.07 9.56 2 u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 32
Bronze Ball Valves Three-Piece Body Full Port 316SS Trim Blowout-Proof Stem Vented Ball Dezincification Resistant 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 150 PSI/10.3 Bar Saturated Steam u CONFORMS TO MSS SP-110 1. Handle Nut Stainless Steel 300 Series 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Stem Stainless Steel ASTM A 276 Type 316 5. Body Bronze ASTM B 584 Alloy C84400 6. Packing PTFE 7. Body End (2) Cast Bronze ASTM B 584 Alloy C84400 8. O-Ring Seal (2) Fluorocarbon Rubber 9. Seat Ring (2) PTFE 10. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 11. Thrust Washer Reinforced PTFE 12. Body Bolts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 13. Body Nuts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 Note: Valves are static grounded by a grounding washer. (Not Shown) T-595-Y-66 Threaded S-595-Y-66 Solder T-595-Y-66 NPT x NPT S-595-Y-66 C x C T-595-Y-66 S-595-Y-66 S-595-Y-66 Size A A B C D E F T-595-Y-66 S-595-Y-66 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.50 64 1.69 43 1.81 46.38 10 1.69 43 3.91 99 1.13 29 1.03.47.89.40 50 ³ ₈ 10 2.50 64 1.81 46 1.81 46.38 10 1.69 43 3.91 99 1.13 29.98.44.89.40 50 ¹ ₂ 15 2.50 64 2.06 52 1.81 46.50 13 1.69 43 3.91 99 1.13 29 1.03.47.89.40 50 ³ ₄ 20 3.00 76 2.94 75 1.94 49.75 19 2.00 51 4.66 118 1.44 37 1.70.77 1.59.72 30 1 25 3.69 94 3.66 93 2.50 64 1.00 25 2.25 57 4.66 118 1.84 47 2.82 1.28 2.55 1.15 20 1 ¹ ₄ 32 4.09 104 3.91 99 2.69 68 1.25 32 2.75 70 6.69 170 1.97 50 3.96 1.80 3.61 1.64 10 1 ¹ ₂ 40 4.56 116 4.60 117 3.00 76 1.50 38 2.97 75 6.69 170 2.38 60 5.68 2.57 5.31 2.41 10 2 50 6.16 156 5.78 147 4.00 102 2.00 51 3.63 92 6.69 170 3.06 78 11.40 5.17 10.60 4.81 4 2 ¹ ₂ 65 6.84 174 6.94 176 5.00 127 2.50 64 4.09 104 8.00 203 4.00 102 21.07 9.56 19.30 8.75 2 LEAD FREE OPTION AVAILABLE u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 33
Bronze Ball Valves Three-Piece Body Full Port 316SS Internal Trim 300 Series External Trim Blowout-Proof Stem Vented Ball Dezincification Resistant 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 150 PSI/10.3 Bar Saturated Steam u CONFORMS TO MSS SP-110 1. Handle Nut 300 Series Stainless Steel 2. Handle 300 Series Stainless Steel with Plastisol Grip 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Stem Stainless Steel ASTM A 276 Type 316 5. Body Bronze ASTM B 584 Alloy C84400 6. Packing PTFE 7. Body End (2) Cast Bronze ASTM B 584 Alloy C84400 8. O-Ring Seal (2) Fluorocarbon Rubber 9. Seat Ring (2) PTFE 10. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 11. Thrust Washer Reinforced PTFE 12. Body Bolts 300 Series Stainless Steel 13. Body Nuts 300 Series Stainless Steel Note: Valves are static grounded by a grounding washer. (Not Shown) T-595-Y-66-SS Threaded T-595-Y-66-SS NPT x NPT Size A B C D E T-595-Y-66-SS Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.50 64 1.81 46.38 10 1.69 43 3.91 99 1.03.47 50 ³ ₈ 10 2.50 64 1.81 46.38 10 1.69 43 3.91 99.98.44 50 ¹ ₂ 15 2.50 64 1.81 46.50 13 1.69 43 3.91 99 1.03.47 50 ³ ₄ 20 3.00 76 1.94 49.75 19 2.00 51 4.66 118 1.70.77 30 1 25 3.69 94 2.50 64 1.00 25 2.25 57 4.66 118 2.82 1.28 20 1 ¹ ₄ 32 4.09 104 2.69 68 1.25 32 2.75 70 6.69 170 3.96 1.80 10 1 ¹ ₂ 40 4.56 116 3.00 76 1.50 38 2.97 75 6.69 170 5.68 2.57 10 2 50 6.16 156 4.00 102 2.00 51 3.63 92 6.69 170 11.40 5.17 4 2 ¹ ₂ 65 6.84 174 5.00 127 2.50 64 4.09 104 8.00 203 21.07 9.56 2 u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 34
Bronze Ball Valves Three-Piece Body Full Port Thread x Solder End Connections Blowout-Proof Stem Dezincification Resistant 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 150 PSI/10.3 Bar Saturated Steam u CONFORMS TO MSS SP-110 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Stem Silicon Bronze ASTM B 371 Alloy C69430 or ASTM B 99 Alloy C65100 5. Packing PTFE 6. Thrust Washer Reinforced PTFE 7. O-Ring Seal (2) Fluorocarbon Rubber 8. Seat Ring (2) PTFE 9. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 10. Solder Body End Cast Bronze ASTM B 584 Alloy C84400 11. Body Bronze ASTM B 584 Alloy C84400 12. Threaded Body End Bronze ASTM B 584 Alloy C84400 13. Body Bolts (4) Zinc Dichromate Plated Steel ASTM A 449 Grade 5 14. Body Nuts (4) Zinc Dichromate Plated Steel Note: Valves are static grounded by a grounding washer. (Not Shown) TS-595-Y Threaded x Solder TS-595-Y C x NPT Size A B C D E F TS-595-Y Box Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Qty. Ctn. Qty. ¹ ₄ 8 2.09 53 1.81 46.38 10 1.69 43 3.90 99.56 14.94.43 5 50 ³ ₈ 10 2.16 55 1.81 46.38 10 1.69 43 3.90 99.56 14.94.43 5 50 ¹ ₂ 15 2.28 58 1.81 46.50 13 1.69 43 3.90 99.56 14 1.01.47 5 50 ³ ₄ 20 2.97 75 1.94 49.75 19 2.00 51 4.66 118.72 18 1.73.79 5 30 1 25 3.67 93 2.50 64 1.00 25 2.25 57 4.66 118.92 23 2.75 1.25 5 20 1 ¹ ₄ 32 3.97 101 2.69 68 1.25 32 2.75 70 6.69 170.98 24 3.90 1.77 2 10 1 ¹ ₂ 40 4.57 116 3.00 76 1.50 38 2.97 75 6.69 170 1.19 30 5.50 2.49 2 10 2 50 5.97 152 4.00 102 2.00 51 3.63 92 6.69 170 1.54 39 10.27 4.66 2 4 u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 41. 35
Bronze Ball Valves Three-Piece Body Full Port Grooved End Bronze Trim Blowout-Proof Stem Dezincification Resistant 600 PSI/41.4 Bar Non-Shock Cold Working Pressure CONFORMS TO MSS SP-110 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Stem Silicon Bronze ASTM B 371 Alloy C69430 or ASTM B 99 Alloy C65100 5. Body Bronze ASTM B 584 Alloy C84400 6. Packing PTFE 7. Body End (2) Bronze ASTM B 584 Alloy C84400 8. O-Ring Seal (2) Fluorocarbon Rubber 9. Seat Ring (2) PTFE 10. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 11. Thrust Washer Reinforced PTFE 12. Body Bolts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 13. Body Nuts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 Note: Valves are static grounded by a grounding washer. (Not Shown) G-595-Y Grooved Size A B C D E G-595-Y Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. 1 ¹ ₂ 40 5.87 149 3.00 76 1.50 38 2.97 75 6.69 170 6.02 2.73 10 2 50 6.64 169 4.00 102 2.00 51 3.63 92 6.69 170 10.48 4.76 4 2 ¹ ₂ 65 7.78 198 5.00 127 2.50 64 4.09 104 8.00 203 18.30 8.30 2 G-595-Y GRVD x GRVD 36
Bronze Ball Valves Three-Piece Body Full Port Grooved End 316SS Trim Blowout-Proof Stem Vented Ball Dezincification Resistant 600 PSI/41.4 Bar Non-Shock Cold Working Pressure CONFORMS TO MSS SP-110 1. Handle Nut Stainless Steel 300 Series 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Stem Stainless Steel ASTM A 276 Type 316 5. Body Bronze ASTM B 584 Alloy C84400 6. Packing PTFE 7. Body End (2) Cast Bronze ASTM B 584 Alloy C84400 8. O-Ring Seal (2) Fluorocarbon Rubber 9. Seat Ring (2) PTFE 10. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 11. Thrust Washer Reinforced PTFE 12. Body Bolts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 13. Body Nuts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 Note: Valves are static grounded by a grounding washer. (Not Shown) G-595-Y-66 Grooved Size A B C D E G-595-Y-66 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. 1 ¹ ₂ 40 5.87 149 3.00 76 1.50 38 2.97 75 6.69 170 6.02 2.73 10 2 50 6.64 169 4.00 102 2.00 51 3.63 92 6.69 170 10.48 4.76 4 2 ¹ ₂ 65 7.78 198 5.00 127 2.50 64 4.09 104 8.00 203 18.30 8.30 2 G-595-Y-66 GRVD x GRVD 37
Bronze Ball Valves Three-Piece Body Full Port ¹ ₄"-2" UL Listed for Flammable Liquids and LP Gas Blowout-Proof Stem Dezincification Resistant 175 PSI/12.1 Bar Non-Shock LP Gas per UL842 CONFORMS TO MSS SP-110 UL842 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Stem Silicon Bronze ASTM B 371 Alloy C69400 or ASTM B 99 Alloy C65100 5. Body Bronze ASTM B 584 Alloy C84400 6. Packing PTFE 7. Body End (2) Bronze ASTM B 584 Alloy C84400 8. O-Ring Seal (2) Fluorocarbon Rubber 9. Seat Ring (2) PTFE 10. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 11. Thrust Washer Reinforced PTFE 12. Body Bolts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 13. Body Nuts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 Note: Valves are static grounded by a grounding washer. (Not Shown) T-595-Y-UL Threaded UL Listed For: YQNZ Compressed gas shut-off YRPV Gas shut-off YRBX Flammable liquid shut-off MHKZ Manual valves Service A - Air or non-toxic, non-flammable gas G - City gas supplied by public utilities GA - Gasoline LP - Liquified petroleum gas, 175 PSI max. 02 - No. 1 and 2 fuel oil 04 - No. 4 fuel oil 05 - No. 5 fuel oil 06 - No. 6 fuel oil Size A B C D E T-595-Y-UL Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.50 64 1.81 46.38 10 1.69 43 3.90 99.94.43 50 ³ ₈ 10 2.50 64 1.81 46.38 10 1.69 43 3.90 99.94.43 50 ¹ ₂ 15 2.50 64 1.81 46.50 13 1.69 43 3.90 99 1.01.47 50 ³ ₄ 20 3.00 76 1.94 49.75 19 2.00 51 4.66 118 1.73.79 30 1 25 3.69 94 2.50 64 1.00 25 2.25 57 4.66 118 2.75 1.25 20 1 ¹ ₄ 32 4.09 104 2.69 68 1.25 32 2.75 70 6.69 170 3.90 1.77 10 1 ¹ ₂ 40 4.56 116 3.00 76 1.50 38 2.97 75 6.69 170 5.50 2.49 10 2 50 6.16 156 4.00 102 2.00 51 3.63 92 6.69 170 10.27 4.66 4 T-595-Y-UL NPT x NPT 38
Bronze Ball Valves Three-Piece Body Full Port Copper Stub Ends Type K (Straight) Type L (Expanded) Cleaned and Bagged for OX Service Bronze Trim Blowout-Proof Stem 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 200 PSI/13.8 Bar for Medical Gas CONFORMS TO MSS SP-110 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Stem Silicon Bronze ASTM B 371 Alloy C69430 or ASTM B 99 Alloy C65100 5. Body Bronze ASTM B 584 Alloy C84400 6. Packing PTFE 7. Body End (2) Bronze ASTM B 584 Alloy C84400 8. O-Ring Seal (2) Fluoroelastomer Rubber 9. Seat Ring (2) PTFE 10. Ball Brass ASTM B 124 Alloy C37700 or ASTM B16 Alloy C36000 EACH with Hard Chrome Plate 11. Ground Washer Stainless Steel ASTM A 167 Type 304 12. Thrust Washer Reinforced PTFE 13. Body Bolts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 14. Body Nuts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 15. Straight Stub Out (2) 6" Copper Tube Type K 16. Expanded Stub Out (2) 6" Copper Tube Type L (Specify EC) Note: Valves are static grounded by a grounding washer. (Not Shown) CS-595-YX-EC Copper Stub Ends Dezincification Resistant Testing The CS-595-YX series are tested to MSS SP-110. For applications that require a 150 PSI dry nitrogen test, please contact NIBCO Technical Services. MSS SP-110 Test parameters are as follows: Shell Test = 80 PSI air under water for 5 seconds or 1.5 x CWP hydrostatic for 15 seconds. Seat Test = 80 PSI air under water for 5 seconds or 1.1 CWP hydrostatic for 15 seconds. Oxygen Cleaning NIBCO's internal cleaning procedure for cleaned and bagged bronze ball valves meets the requirements of NFPA99 and CGA Pamphlet G-4-1. CS-595-YX/CS-595-YX-EC CSE x CSE Size A B C D F G H CS-595-YX/EC Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₂ 15.50 13 1.69 43 1.81 46 1.11 28 13.11 333 3.91 99.50 13 1.22.55 10 ³ ₄ 20.75 19 2.00 51 1.94 50 1.41 36 13.41 341 4.66 118.75 19 2.25 1.02 10 1 25 1.00 25 2.25 57 2.50 64 1.81 46 13.81 351 4.66 118.91 23 3.23 1.47 10 1 ¹ ₄ 32 1.25 32 2.75 70 2.69 68 1.96 50 13.96 355 6.69 170.97 25 4.41 2.00 4 1 ¹ ₂ 40 1.50 38 2.97 75 3.00 76 2.39 61 14.39 366 6.69 170 1.09 28 6.61 3.00 4 2 50 2.00 51 3.63 92 4.00 102 3.04 77 15.04 382 6.69 170 1.34 34 11.67 5.29 4 39
Bronze Ball Valves Three-Piece Body Full Port 6" Copper Stub Ends Type K (Straight) Type L (Expanded) Cleaned and Bagged for OX Service 316SS Trim Blowout-Proof 600 PSI/41.4 Bar Non-Shock Cold Working Pressure 200 PSI/13.8 Bar for Medical Gas Dezincification Resistant CONFORMS TO MSS SP-110 1. Handle Nut Zinc Plated Steel 2. Handle Zinc Plated Steel Clear Chromate Plastisol Coated 3. Threaded Pack Gland Brass ASTM B 16 Alloy C36000 4. Stem Stainless Steel ASTM A 276 Type 316 5. Body Bronze ASTM B 584 Alloy C84400 6. Packing PTFE 7. Body End (2) Bronze ASTM B 584 Alloy C84400 8. O-Ring Seal (2) Fluoroelastomer Rubber 9. Seat Ring (2) PTFE 10. Ball Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 11. Ground Washer Stainless Steel ASTM A 167 Type 304 12. Thrust Washer Reinforced PTFE 13. Body Bolts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 14. Body Nuts Zinc Dichromate Plated Steel ASTM A 449 Grade 5 15. Straight Stub Out (2) 6" Copper Tube Type K 16. Expanded Stub Out (2) 6" Copper Tube Type L (Specify EC) Note: Valves are static grounded by a grounding washer. (Not Shown) CS-595-YX-66-EC (316SS Trim) Copper Stub Ends Testing The CS-595-YX series are tested to MSS SP-110. For applications that require a 150 PSI dry nitrogen test, please contact NIBCO Technical Services. MSS SP-110 Test parameters are as follows: Shell Test = 80 PSI air under water for 5 seconds or 1.5 x CWP hydrostatic for 15 seconds. Seat Test = 80 PSI air under water for 5 seconds or 1.1 CWP hydrostatic for 15 seconds. Oxygen Cleaning NIBCO's internal cleaning procedure for cleaned and bagged bronze ball valves meets the requirements of NFPA99 and CGA Pamphlet G-4-1. CS-595-YX-66/CS-595-YX-66-EC CSE x CSE Size A B C D F G H CS-595-YX-66/EC Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₂ 15.50 13 1.69 43 1.81 46 1.11 28 13.11 333 3.91 99.50 13 1.22.55 10 ³ ₄ 20.75 19 2.00 51 1.94 50 1.41 36 13.41 341 4.66 118.75 19 2.25 1.02 10 1 25 1.00 25 2.25 57 2.50 64 1.81 46 13.81 351 4.66 118.91 23 3.23 1.47 10 1 ¹ ₄ 32 1.25 32 2.79 40 2.69 68 1.96 50 13.96 355 6.69 170.97 25 4.41 2.00 4 1 ¹ ₂ 40 1.50 38 2.97 75 3.00 76 2.39 61 14.39 366 6.69 170 1.09 28 6.61 3.00 4 2 50 2.00 51 3.63 92 4.00 102 3.04 77 15.04 382 6.69 170 1.34 34 11.67 5.29 4 40
Pressure Temperature Ratings Bronze Ball Valves T-560-BR, T/S-580-70, and 585-70 Bronze Ball Valves with Reinforced PTFE Seats Temperature, C 0 38 93 149 204 580 Bronze Ball Valves with PTFE Seats Temperature, C 0 38 93 149 204 T-585-70-66-ST Bronze Ball Valves with Carbon Filled PTFE Seats Temperature, C 0 38 93 149 204 260 T-560-BR, 590, and 595 Bronze Ball Valves with Virgin PTFE Seats Temperature, C 0 38 93 149 204 401 Shaded area refers to recommended seat rating. *NIBCO recommends stainless steel trim where heat is a significant factor due to its hardness and pressure relief vented ball. 41
Carbon Steel Ball Valves One, Two, and Three-Piece Body Threaded, Butt or Socket Weld Ends Carbon Steel Ball Valve Figure Number Key T-560-CS-R-25- ** End Connection Valve Style Basic Material Seat Material Trim Material Options K - Socket Weld T - Threaded TC - Threaded (Investment Cast Carbon Body) BM - Butt Weld ISO Mount KM - Socket Weld ISO Mount TM - Threaded ISO Mount 560 - One-Piece Body (Casting) 570 - One-Piece Body (Bar Stock) 580 - Two-Piece Body Conventional Port 585 - Two-Piece Body Full Port 590 - Three-Piece Body Conventional Port 595 - Three-Piece Body Full Port CS - Carbon Steel S6 - Stainless Steel Y - Virgin PTFE R - Reinforced PTFE 25 - Carbon Steel 66 - Stainless Steel FS - Fire Safe OL - Oval Locking Hdle LL - Locking Lever Hdle OV - Oval Hdle * This key is a guide only and is not intended to infer that every valve combination will be produced. 42
One, Two, and Three-Piece Carbon Steel Ball Valves Illustrated Index One-Piece Carbon Steel Ball Valve 2000 lb. CWP One-Piece Bar Stock Carbon Steel Ball Valve 2000 lb. CWP ¹ ₂"-1" 1500 lb. CWP 1¹ ₄"-2" Two-Piece Carbon Steel Ball Valve 2000 lb. CWP T-560-CS-R-25/66-FS Sizes ¹ ₄" thru 2" Threaded Ends Pages 44-47 T-570-CS-R-25/66 Sizes ¹ ₂" thru 2" Threaded Ends Page 48, 49 TC-580-CS-R-25-LL/66-LL Sizes ¹ 4" thru 2" Threaded Ends Page 50, 51 Two-Piece Bar Stock Carbon Steel Ball Valve 2000 lb. CWP ¹ ₄"-1" 1500 lb. CWP 1¹ ₄"-2" Three-Piece Carbon Steel Ball Valve 2000 lb. CWP Three-Piece Carbon Steel Ball Valve 1000 lb. CWP T-580-CS-R-25/66 Sizes ¹ ₄" thru 2" Threaded Ends Page 52, 53 TM/KM/BM-590-CS-R-66-FS-LL Sizes ¹ ₂" thru 2" Threaded, Socket or Butt Weld Ends Page 54 T/K-595-CS-R-66-LL Sizes ¹ ₄" thru 2" Threaded or Socket Weld Ends Page 55 Three-Piece Carbon Steel Ball Valve 1000 lb. CWP TM/KM-595-CS-R-66 Sizes ¹ ₄" thru 2" Threaded or Socket Weld Ends Page 56 43
Carbon Steel Ball Valves One-Piece Body Reduced Port Blowout-Proof Stem CS Trim Vented Ball 2000 PSI/138 Bar Non-Shock Cold Working Pressure u CONFORMS TO MSS SP-110 1. Body Carbon Steel ASTM A 216 Grade WCB 2. Body Insert Carbon Steel ASTM A 216 Grade WCB 3. Ball (Vented) Stainless Steel ASTM A 276 or ASTM A 351 Type CF8 4. Stem Carbon Steel ASTM A 108 Type 1045 5. Seat Reinforced PTFE 6. Thrust Washer Carbon Filled PTFE 7. 1 Stem Packing PTFE 8. Threaded Pack Gland Carbon Steel ASTM A 108 Type 1045 9. Handle Nut Carbon Steel ASTM A 283 10. Handle Carbon Steel ASTM A 283 1 ¹ ₄"-³ ₄" one each, 1"-2" two each. T-560-CS-R-25-LL Threaded NOTE: Valves are static grounded by thrust washer and packing. T-560-CS-R-25-LL NPT x NPT Size A B D L H T-560-CS-R-25-LL Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.28 58 1.10 28.31 8 4.29 109 1.97 50.68.31 50 ³ ₈ 10 2.28 58 1.10 28.31 8 4.29 109 1.97 50.68.31 50 ¹ ₂ 15 2.60 66 1.10 28.31 8 4.29 109 1.97 50.66.30 50 ³ ₄ 20 2.83 72 1.34 34.47 12 4.29 109 2.20 56.93.42 50 1 25 3.23 82 1.61 41.62 16 5.75 146 2.56 65 1.59.72 40 1 ¹ ₄ 32 3.54 90 1.97 50.81 21 5.75 146 2.76 70 2.22 1.01 20 1 ¹ ₂ 40 3.86 98 2.24 57 1.00 25 7.40 188 3.29 84 3.22 1.46 20 2 50 4.33 110 2.76 70 1.25 32 7.40 188 3.49 89 4.65 2.11 10 u For detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67 44
Revision 2/12/2015 Carbon Steel Ball Valves One-Piece Body Reduced Port Blowout-Proof Stem CS Trim Vented Ball Fire Safe 2000 PSI/138 Bar Non-Shock Cold Working Pressure u CONFORMS TO API-607 Fourth edition fire safe MSS SP-110 1. Body Carbon Steel ASTM A 216 Grade WCB 2. Body Insert Carbon Steel ASTM A 216 Grade WCB 3. Ball (Vented) Stainless Steel ASTM A 276 or ASTM A 351 Type CF8 4. Stem Carbon Steel ASTM A 108 Type 1045 5. Seat Reinforced PTFE 6. Thrust Washer Carbon Filled PTFE 7. 1 Stem Packing Graphoil 8. Threaded Pack Gland Carbon Steel ASTM A 108 Type 1045 9. Handle Nut Carbon Steel ASTM A 283 10. Handle Carbon Steel ASTM A 283 1 1/2"-³ ₄" one each, 1"-2" two each. NOTE: Valves are static grounded by thrust washer and packing. T-560-CS-R-25-FS-LL Threaded T-560-CS-R-25-FS-LL NPT x NPT Size A B D L H T-560-CS-R-25-FS-LL Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₂ 15 2.60 66 1.10 28.31 8 4.29 109 1.97 50.66.30 50 ³ ₄ 20 2.83 72 1.34 34.47 12 4.29 109 2.20 56.93.42 50 1 25 3.23 82 1.61 41.62 16 5.75 146 2.56 65 1.59.72 40 1 ¹ ₄ 32 3.54 90 1.97 50.81 21 5.75 146 2.76 70 2.22 1.01 20 1 ¹ ₂ 40 3.86 98 2.24 57 1.00 25 7.40 188 3.29 84 3.22 1.46 20 2 50 4.33 110 2.76 70 1.25 32 7.40 188 3.49 89 4.65 2.11 10 u For detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 45
Carbon Steel Ball Valves One-Piece Body Reduced Port Blowout-Proof Stem 316 SS Trim Vented Ball 2000 PSI/138 Bar Non-Shock Cold Working Pressure u CONFORMS TO MSS SP-110 1. Body Carbon Steel ASTM A 216 Grade WCB 2. Body Insert Carbon Steel ASTM A 216 Grade WCB 3. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 4. Stem Stainless Steel ASTM A 276 Type 316 5. Seat Reinforced PTFE 6. Thrust Washer Carbon Filled PTFE 7. 1 Stem Packing Graphoil 8. Threaded Pack Gland Carbon Steel ASTM A 108 Type 1045 9. Handle Nut Carbon Steel ASTM A 283 10. Handle Carbon Steel ASTM A 283 1 ¹ ₄"-³ ₄" one each, 1"-2" two each. NOTE: Valves are static grounded by thrust washer and packing. T-560-CS-R-66-LL Threaded T-560-CS-R-66-LL NPT x NPT Size A B D L H T-560-CS-R-66-LL Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.28 58 1.10 28.31 8 4.29 109 1.97 50.68.31 50 ³ ₈ 10 2.28 58 1.10 28.31 8 4.29 109 1.97 50.68.31 50 ¹ ₂ 15 2.60 66 1.10 28.31 8 4.29 109 1.97 50.66.30 50 ³ ₄ 20 2.83 72 1.34 34.47 12 4.29 109 2.20 56.93.42 50 1 25 3.23 82 1.61 41.62 16 5.75 146 2.56 65 1.59.72 40 1 ¹ ₄ 32 3.54 90 1.97 50.81 21 5.75 146 2.76 70 2.22 1.01 20 1 ¹ ₂ 40 3.86 98 2.24 57 1.00 25 7.40 188 3.29 84 3.22 1.46 20 2 50 4.33 110 2.76 70 1.25 32 7.40 188 3.49 89 4.65 2.11 10 u For detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 46
Revision 2/12/2015 Carbon Steel Ball Valves One-Piece Body Reduced Port Blowout-Proof Stem 316 SS Trim Vented Ball Fire Safe 2000 PSI/138 Bar Non-Shock Cold Working Pressure u CONFORMS TO API-607 Fourth Edition Fire Safe MSS SP-110 1. Body Carbon Steel ASTM A 216 Grade WCB 2. Body Insert Carbon Steel ASTM A 216 Grade WCB 3. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 4. Stem Stainless Steel ASTM A 276 Type 316 5. Seat Reinforced PTFE 6. Thrust Washer Carbon Filled PTFE 7. 1 Stem Packing Graphoil 8. Threaded Pack Gland Carbon Steel ASTM A 108 Type 1045 9. Handle Nut Carbon Steel ASTM A 283 10. Handle Carbon Steel ASTM A 283 1 1/2"-³ ₄" one each, 1"-2" two each. T-560-CS-R-66-FS-LL Threaded NOTE: Valves are static grounded by thrust washer and packing. T-560-CS-R-66-FS-LL NPT x NPT Size A B D L H T-560-CS-R-66-FS-LL Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₂ 15 2.60 66 1.10 28.31 8 4.29 109 1.97 50.66.30 50 ³ ₄ 20 2.83 72 1.34 34.47 12 4.29 109 2.20 56.93.42 50 1 25 3.23 82 1.61 41.62 16 5.75 146 2.56 65 1.59.72 40 1 ¹ ₄ 32 3.54 90 1.97 50.81 21 5.75 146 2.76 70 2.22 1.01 20 1 ¹ ₂ 40 3.86 98 2.24 57 1.00 25 7.40 188 3.29 84 3.22 1.46 20 2 50 4.33 110 2.76 70 1.25 32 7.40 188 3.49 89 4.65 2.11 10 u For detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 47
Carbon Steel Ball Valves One-Piece Bar Stock Body Blowout-Proof Stem CS Trim Vented Ball 2000 PSI/138 Bar Non-Shock Cold Working Pressure (¹ ₂"-1") 1500 PSI/103 Bar Non-Shock Cold Working Pressure (1¹ ₄"-2") u CONFORMS TO MSS SP-110 1. Handle Nut Carbon Steel ASTM A 283 Zinc Plated 2. Handle Carbon Steel ASTM A 283 Zinc Plated 3. Packing Nut Carbon Steel ASTM A 283 Zinc Plated 4. Belleville Washer (2) Carbon Steel Black Oxide ASTM A 686 5. Pack Gland Stainless Steel ASTM A 240 Type 304 6. Stem Packing Reinforced PTFE 7. Thrust Washer Reinforced PTFE 8. Stem Carbon Steel ASTM A 108 Type 1045 9. Ball (Vented) Carbon Steel ASTM 108 Type 1015/1045 Chrome Plated 10. Seat Ring (2) Reinforced PTFE 11. Body Insert Carbon Steel ASTM A 108 Type 1018 Phosphate Coated 12. Body Carbon Steel ASTM A 108 Type 1018 Phosphate Coated NOTE: Valves are not available static grounded. T-570-CS-R-25 Threaded T-570-CS-R-25 NPT x NPT Size A B C D E T-570-CS-R-25 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₂ 15 2.19 56 1.10 28 1.63 41.35 9 4.17 102.55.25 80 ³ ₄ 20 2.63 67 1.32 34 1.75 44.47 12 4.17 102.77.35 80 1 25 3.15 80 1.58 40 2.13 54.62 16 5.83 145 1.60.73 40 1 ¹ ₄ 32 3.62 92 1.81 46 2.31 59.81 21 5.83 145 2.35 1.07 8 1 ¹ ₂ 40 4.00 102 2.00 51 2.75 70 1.00 25 7.00 175 3.47 1.58 8 2 50 4.50 114 2.25 57 3.00 76 1.25 32 7.24 175 5.50 2.50 8 u For detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 48
Carbon Steel Ball Valves One-Piece Bar Stock Body Blowout-Proof Stem 316 SS Trim Vented Ball 2000 PSI/138 Bar Non-Shock Cold Working Pressure (¹ ₂"-1") 1500 PSI/103 Bar Non-Shock Cold Working Pressure (1¹ ₄"-2") u CONFORMS TO MSS SP-110 1. Handle Nut Carbon Steel ASTM A 283 Zinc Plated 2. Handle Carbon Steel ASTM A 283 Zinc Plated 3. Packing Nut Carbon Steel ASTM A 283 Zinc Plated 4. Belleville Washer (2) Carbon Steel Black Oxide ASTM A 686 5. Pack Gland Stainless Steel ASTM A 240 Type 304 6. Stem Packing Reinforced PTFE 7. Thrust Washer Reinforced PTFE 8. Stem Stainless Steel ASTM A 276 Type 316 9. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 10. Seat Ring (2) Reinforced PTFE 11. Body Insert Carbon Steel ASTM A 108 Type 1018 Phosphate Coated 12. Body Carbon Steel ASTM A 108 Type 1018 Phosphate Coated NOTE: Valves are not available static grounded. T-570-CS-R-66 Threaded Reinforced PTFE Seats and Seals with SS Trim T-570-CS-R-66 NPT x NPT Size A B C D E T-570-CS-R-66 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₂ 15 2.19 56 1.10 28 1.63 41.35 9 4.17 102.55.25 80 ³ ₄ 20 2.63 67 1.32 34 1.75 44.47 12 4.17 102.77.35 80 1 25 3.15 80 1.58 40 2.13 54.62 16 5.83 145 1.60.74 40 1 ¹ ₄ 32 3.62 92 1.81 46 2.31 59.81 21 5.83 145 2.35 1.07 8 1 ¹ ₂ 40 4.00 102 2.00 51 2.75 70 1.00 25 7.00 175 3.47 1.58 8 2 50 4.50 114 2.25 57 3.00 76 1.25 32 7.24 175 5.50 2.50 8 u For detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 49
Carbon Steel Ball Valves Two-Piece Body Conventional Port Blowout-Proof Stem CS Trim Cast Mounting Pad Vented Ball 2000 PSI/138 Bar Non-Shock Cold Working Pressure u CONFORMS TO MSS SP-110 1. Handle Nut Carbon Steel ASTM A 283 2. Stem Carbon Steel ASTM A 108 Type 1045 3. Lock Washer Carbon Steel 4. Threaded Pack Gland Carbon Steel ASTM A 108 Type 1045 5. Thrust Washer Carbon Filled PTFE 6. Gasket PTFE 7. Body End Piece Carbon Steel ASTM A 216 Grade WCB (Investment Cast) 8. Ball (Vented) Stainless Steel ASTM A 276 Type 304 or ASTM A 351 Type CF8M 9. Seat (2) Reinforced PTFE 10. Body Carbon Steel ASTM A 216 Grade WCB 11. Stem Packing (2) Carbon Filled PTFE 12. Locking Handle Carbon Steel ASTM A 283 NOTE: Valves are static grounded by thrust washer and packing. TC-580-CS-R-25-LL Threaded TC-580-CS-R-25-LL NPT x NPT Size A B D H L TC-580-CS-R-25-LL Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.07 53.83 21.37 9 1.76 45 4.33 110.51.23 10 ³ ₈ 10 2.07 53.83 21.37 9 1.76 45 4.33 110.48.22 10 ¹ ₂ 15 2.34 59 1.06 27.50 13 1.92 47 4.33 110.66.30 10 ³ ₄ 20 2.80 71 1.34 34.69 18 2.40 61 5.83 148 1.30.59 10 1 25 3.23 82 1.61 41.87 22 2.56 65 5.83 148 1.79.81 10 1 ¹ ₄ 32 3.57 91 1.89 48 1.00 25 2.74 70 7.76 197 2.52 1.14 5 1 ¹ ₂ 40 4.04 103 2.26 57 1.25 32 2.98 76 7.76 197 3.75 1.70 5 2 50 4.63 118 2.76 70 1.50 38 3.17 81 7.76 197 5.80 2.63 5 u For detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 50
Carbon Steel Ball Valves Two-Piece Body Conventional Port Blowout-Proof Stem 316 SS Trim Cast Mounting Pad Vented Ball 2000 PSI/138 Bar Non-Shock Cold Working Pressure u CONFORMS TO MSS SP-110 1. Handle Nut Carbon Steel ASTM A 283 2. Stem Stainless Steel ASTM A 276 Type 316 3. Lock Washer Carbon Steel 4. Threaded Pack Gland Carbon Steel ASTM A 108 Type 1045 5. Thrust Washer Carbon Filled PTFE 6. Gasket PTFE 7. Body End Piece Carbon Steel ASTM A 216 Grade WCB (Investment Cast) 8. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 9. Seat (2) Reinforced PTFE 10. Body Carbon Steel ASTM A 216 Grade WCB 11. Stem Packing (2) Carbon Filled PTFE 12. Locking Handle Carbon Steel ASTM A 283 NOTE: Valves are static grounded by thrust washer and packing. TC-580-CS-R-66-LL Threaded TC-580-CS-R-66-LL NPT x NPT Size A B D L H TC-580-CS-R-66-LL Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.07 53.90 23.37 9 1.76 45 4.33 110.51.23 10 ³ ₈ 10 2.07 53.90 23.37 9 1.76 45 4.33 110.48.22 10 ¹ ₂ 15 2.34 59 1.06 27.50 13 1.92 49 4.33 110.66.30 10 ³ ₄ 20 2.80 71 1.34 34.69 18 2.40 61 5.83 148 1.30.59 10 1 25 3.23 82 1.61 41.87 22 2.56 65 5.83 148 1.79.81 10 1 ¹ ₄ 32 3.57 91 1.89 48 1.00 25 2.74 70 7.76 197 2.52 1.14 5 1 ¹ ₂ 40 4.04 103 2.26 57 1.25 32 2.98 76 7.76 197 3.75 1.70 5 2 50 4.63 118 2.76 70 1.50 38 3.17 81 7.76 197 5.80 2.63 5 u For detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 51
Carbon Steel Ball Valves Two-Piece Bar Stock Body Conventional Port Blowout-Proof Stem CS Trim Vented Ball 2000 PSI/138 Bar Non-Shock Cold Working Pressure (¹ ₄"-1") 1500 PSI/103 Bar Non Shock Cold Working Pressure (1¹ ₄"-2") u CONFORMS TO MSS SP-110 1. Handle Nut Carbon Steel ASTM A 283 2. Stem Carbon Steel ASTM A 108 Type 1045 3. Spring Washer Carbon Steel 4. Belleville Washer (2) Carbon Steel ASTM A 686 5. Stem Packing (2) Reinforced PTFE 6. Thrust Washer Carbon Filled PTFE 7. Body End Piece Carbon Steel ASTM A 108 Type 1018 8. Spacer Seal PTFE 9. Ball (Vented) Stainless Steel ASTM A 276 Type 304 or ASTM A 351 Type CF8M 10. Seat (2) Reinforced PTFE 11. Body Carbon Steel ASTM A 108 Type 1018 12. Gland Washer Stainless Steel ASTM A 240 Type 304 13. Handle Carbon Steel ASTM A 283 ¹ ₄"-1" 2000 PSI CWP, 1¹ ₄"-2" 1500 PSI CWP. NOTE: Valves are static grounded by thrust washer and packing. T-580-CS-R-25 Threaded Size A B D H L T-580-CS-R-25 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.30 58 1.02 26.38 9 2.22 56 4.13 105.59.27 10 ³ ₈ 10 2.30 58 1.02 26.38 9 2.22 56 4.13 105.55.25 10 ¹ ₂ 15 2.52 64 1.26 32.50 9 2.44 62 4.17 105.79.36 10 ³ ₄ 20 2.95 75 1.61 41.69 13 2.64 67 4.17 105 1.43.65 10 1 25 3.35 85 1.97 50.87 18 2.83 72 5.83 148 2.40 1.08 10 1 ¹ ₄ 32 3.66 93 2.17 55 1.00 25 2.97 75 5.83 148 3.01 1.37 5 1 ¹ ₂ 40 4.11 104 2.64 67 1.25 32 3.25 83 7.00 182 4.86 2.20 5 2 50 4.61 117 3.03 77 1.50 38 3.54 90 7.24 198 6.62 3.00 5 T-580-CS-R-25 NPT x NPT u For detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 52
Carbon Steel Ball Valves Two-Piece Bar Stock Body Conventional Port Blowout-Proof Stem 316 SS Trim Vented Ball 2000 PSI/138 Bar Non-Shock Cold Working Pressure (¹ ₄"-1") 1500 PSI/103 Bar Non Shock Cold Working Pressure (1¹ ₄"-2") u CONFORMS TO MSS SP-110 1. Handle Nut Carbon Steel ASTM A 283 2. Stem Stainless Steel ASTM A 276 Type 316 3. Lock Washer Carbon Steel 4. Belleville Washer (2) Carbon Steel ASTM A 686 5. Stem Packing (2) Reinforced PTFE 6. Thrust Washer Carbon Filled PTFE 7. Body End Piece Carbon Steel ASTM A 108 Type 1018 8. Spacer Seal PTFE 9. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 10. Seat (2) Reinforced PTFE 11. Body Carbon Steel ASTM A 108 Type 1018 12. Gland Washer Stainless Steel ASTM A 240 Type 304 13. Handle Carbon Steel ASTM A 283 ¹ ₄"-1" 2000 PSI CWP, 1¹ ₄"-2" 1500 PSI CWP. NOTE: Valves are static grounded by thrust washer and packing. T-580-CS-R-66 Threaded Size A B D H L T-580-CS-R-66 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.30 58 1.02 26.38 10 2.22 56 4.13 105.59.27 10 ³ ₈ 10 2.30 58 1.02 26.38 10 2.22 56 4.13 105.55.25 10 ¹ ₂ 15 2.52 64 1.26 32.50 10 2.44 62 4.17 105.79.36 10 ³ ₄ 20 2.95 75 1.61 41.69 13 2.64 66 4.17 105 1.43.65 10 1 25 3.35 85 1.97 50.89 18 2.83 72 5.83 148 2.40 1.08 10 1 ¹ ₄ 32 3.66 93 2.17 55 1.00 25 2.97 75 5.83 148 3.01 1.37 5 1 ¹ ₂ 40 4.11 104 2.64 67 1.25 32 3.25 83 7.00 182 4.80 2.20 5 2 50 4.61 117 3.03 77 1.50 38 3.54 90 7.24 185 6.62 3.00 5 T-580-CS-R-66 NPT x NPT u For detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 53
Carbon Steel Ball Valves Three-Piece Body Threaded, Butt or Socket Weld Ends Blowout-Proof Stem Conventional Port Enclosed Bolt Design PTFE Seats SS Trim Cast ISO Mounting Pad Vented Ball Fire Safe 2000 PSI/138 Bar Non-Shock Cold Working Pressure u CONFORMS TO api-607 Fourth edition fire safe mss sp-110 mss sp-72 (butt weld) api 608 anti-static feature 1. Stem Stainless Steel ASTM A 276 Type 316 2. Handle Nut Stainless Steel ASTM A 276 Type 304 3. Lock Washer Stainless Steel ASTM A 240 Type 304 4. Locking Handle Stainless Steel ASTM A 240 Type 304 5. Stop Plate Stainless Steel ASTM A 240 Type 304 6. Pack Gland Stainless Steel ASTM A 276 Type 316 7. Stem Packing Graphite 8. Body End Seal Graphite 9. Bolt Carbon Steel ASTM A 193 Grade B7 10. Body End Carbon Steel ASTM A 216 Grade WCB Phosphate Coated 11. Body Carbon Steel ASTM A 216 Grade WCB Phosphate Coated 12. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 13. Seat Reinforced PTFE 15% Glass 14. Thrust Washer Reinforced PTFE 15% Glass 15. Static Grounding Devices Stainless Steel ASTM A 276 Type 304 16. Stop Pin Stainless Steel ASTM A 276 Type 304 Note: Valves are static grounded by two ball detents that insure electro-continuity between the stem body and ball. The valve has electro-continuity across the discharge path with a resistance of not more than 10 ohms. TM-590-CS-R-66-FS-LL Threaded Stainless Steel Trim ISO Mount Pad KM-590-CS-R-66-FS-LL Socket Weld Stainless Steel Trim ISO Mount Pad BM-590-CS-R-66-FS-LL Butt Weld Stainless Steel Trim ISO Mount Pad TM 590-CS-R-66-FS-LL NPT x NPT H J K Socket Butt G Socket Socket Butt Threaded Weld Weld Size A B C D E F Thread Flange Weld Weld Weld Weight Weight Weight In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Tap Type In. mm. In mm. In. mm. Lbs. Kg. Lbs. Kg. Lbs. Kg. ¹ ₂ 15 2.72 69 2.47 63 4.07 103.43 11.12 3 1.00 25 M5 F03.86 22.38 10.84 21 1.80.82 1.70.78 1.60.73 ³ ₄ 20 2.94 75 2.70 69 4.07 103.57 14.12 3 1.00 25 M5 F03 1.08 27.50 13 1.05 27 2.40 1.09 2.30 1.05 2.20 1.00 1 25 3.50 89 3.19 81 4.92 125.81 21.18 5 1.17 30 M5 F04 1.34 34.50 13 1.32 34 3.80 1.73 3.60 1.64 3.50 1.59 1 ¹ ₄ 32 3.90 99 3.64 92 5.91 150.98 25.20 5 1.17 30 M5 F04 1.69 43.50 13 1.66 42 5.90 2.68 5.70 2.59 5.60 2.55 1 ¹ ₂ 40 4.42 112 3.88 99 7.68 195 1.25 32.23 8 1.39 35 M6 F05 1.93 49.50 13 1.90 48 7.60 3.45 7.40 3.36 7.30 1.61 2 50 5.04 128 4.09 104 7.68 195 1.50 38.23 8 1.39 35 M6 F05 2.42 61.62 16 2.38 60 10.50 4.77 10.30 4.68 10.20 4.64 u For detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 54
Revision 3/30/2015 Carbon Steel Ball Valves Three-Piece Body Full Port Blowout-Proof Stem 316 SS Trim Vented Ball 1000 PSI/69 Bar Non-Shock Cold Working Pressure u CONFORMS TO MSS SP-110 1. Handle Nut Carbon Steel ASTM A 283 2. Stem Stainless Steel ASTM A 276 Type 316 3. Lock Washer Carbon Steel 4. Stem Packing (1 Set) Carbon Filled PTFE 5. Thrust Washer Carbon Filled PTFE 6. Cap Bolt (4) Carbon Steel ASTM A 193 Grade B7 7. Union Seal (2) Reinforced PTFE 8. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 9. Body Carbon Steel ASTM A 216 Grade WCB 10. Seat (2) Reinforced PTFE 11. Body End (2) Carbon Steel ASTM A 216 Grade WCB 12. Lock Washer (4) Carbon Steel 13. Threaded Pack Gland Carbon Steel ASTM A 108 Type 1045 14. Handle Carbon Steel ASTM A 283 15. Cap Nut (4) Carbon Steel ASTM A 283 NOTE: Valves are static grounded by thrust washer and packing. T-595-CS-R-66-LL Threaded K-595-CS-R-66-LL Socket Weld (1/2" - 2") T or K 595-CS-R-66-LL NPT x NPT or SOC x SOC Size A D G K H L T or K-595-CS-R-66-LL Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.36 60.34 9 2.18 55 4.17 106.97.44 10 ³ ₈ 10 2.36 60.34 9 2.18 55 4.17 106.97.44 10 ¹ ₂ 15 2.76 70.56 14.38 10.86 22 2.38 60 4.17 106 1.23.56 10 ³ ₄ 20 3.03 77.81 21.50 13 1.07 27 2.87 73 5.71 145 1.91.87 10 1 25 3.62 92 1.00 25.50 13 1.34 34 2.95 75 5.71 145 2.93 1.33 8 1 ¹ ₄ 32 4.13 105 1.25 32.50 13 1.69 43 3.66 93 7.36 187 4.27 1.94 5 1 ¹ ₂ 40 4.72 110 1.50 38.50 13 1.93 49 3.94 100 7.36 187 6.01 2.73 5 2 50 5.43 138 1.97 50.62 16 2.42 61 4.25 108 7.95 202 9.50 4.32 5 ufor detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 55
Carbon Steel Ball Valves Three-Piece Body Full Port Cast ISO Mounting Pad Blowout-Proof Stem 316 SS Trim Vented Ball 1000 PSI/69 Bar Non-Shock Cold Working Pressure u CONFORMS TO MSS SP-110 1. Stop Pin Stainless Steel ASTM A 276 Type 304 2. Stop Plate Carbon Steel ASTM A 283 3. Stem Stainless Steel ASTM A 276 Type 316 4. Handle Nut Carbon Steel A 283 5. Stem Packing (1 Set) Carbon Filled PTFE 6. Thrust Washer Carbon Filled PTFE 7. Cap Bolt (4) Carbon Steel ASTM A 193 Grade B7 8. Body Ends (2) Carbon Steel ASTM A 216 Grade WCB 9. Seat (2) Reinforced PTFE 10. Body Carbon Steel ASTM A 216 Grade WCB 11. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 12. Union Seal (2) Reinforced PTFE 13. Cap Nut (4) Carbon Steel A 283 14. Threaded Pack Gland Carbon Steel ASTM A 108 Type 1045 15. Handle Carbon Steel ASTM A 283 NOTE: Valves are static grounded by thrust washer and packing. TM-595-CS-R-66 Threaded ISO Mount Pad KM-595-CS-R-66 Socket Weld (¹ ₂"-2") ISO Mount Pad TM or KM-595-CS-R-66 NPT x NPT or SOC x SOC Size A D E F G K H L ISO TM or KM-595-CS-R-66 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. 5211 Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.49 63.34 9.71 18 1.42 36 2.36 60 4.17 106 F03 1.00.45 10 ³ ₈ 10 2.49 63.34 9.71 18 1.42 36 2.36 60 4.17 106 F03 1.00.45 10 ¹ ₂ 15 2.76 70.56 14.71 18 1.42 36.38 10.87 22 2.36 60 4.17 106 F03 1.20.54 10 ³ ₄ 20 3.03 77.81 21.83 21 1.65 42.50 13 1.08 27 2.83 72 5.04 128 F04 1.90.86 10 1 25 3.63 92 1.00 25.88 22 1.65 42.50 13 1.34 34 3.07 78 5.04 128 F04 2.90 1.31 8 1 ¹ ₄ 32 4.14 105 1.25 32.98 25 1.97 50.50 13 1.69 43 3.35 85 7.83 199 F05 4.30 1.93 5 1 ¹ ₂ 40 4.73 120 1.50 38.98 25 1.97 50.50 13 1.93 49 3.66 93 7.83 199 F05 6.00 2.70 5 2 50 5.43 138 1.97 50.98 25 1.97 50.62 16 2.42 61 4.09 104 7.83 199 F05 9.50 4.28 2 ufor detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 56
Stainless Steel Ball Valves One, Two, and Three-Piece Body Threaded, Butt or Socket Weld Ends Stainless Steel Ball Valve Figure Number Key T-580-S6-R-66- ** End Connection Valve Style Basic Material Seat Material Trim Material Options K - Socket Weld T - Threaded TC - Threaded (Investment Cast Carbon Body) BM - Butt Weld ISO Mount KM - Socket Weld ISO Mount TM - Threaded ISO Mount 560 - One-Piece Body (Casting) 570 - One-Piece Body (Bar Stock) 580 - Two-Piece Body Conventional Port 585 - Two-Piece Body Full Port 590 - Three-Piece Body Conventional Port 595 - Three-Piece Body Full Port CS - Carbon Steel S6 - Stainless Steel Y - Virgin PTFE R - Reinforced PTFE 25 - Carbon Steel 66 - Stainless Steel FS - Fire Safe OL - Oval Locking Handle LL - Locking Lever Handle OV - Oval Handle * This key is a guide only and is not intended to infer that every valve combination will be produced. 57
One, Two, and Three-Piece Stainless Steel Ball Valves Illustrated Index One-Piece Stainless Steel Ball Valve 2000 lb. CWP Two-Piece Stainless Steel Ball Valve 2000 lb. CWP Two-Piece Stainless Steel Ball Valve 1000 lb. CWP T-560-S6-R-66-LL/FS Sizes ¹ ₄" thru 2" Threaded Ends Page 59, 60 T-580-S6-R-66-LL Sizes ¹ ₄" thru 2" Threaded Ends Page 61 T-585-S6-R-66-LL Sizes ¹ ₄" thru 2" Threaded Ends Page 62 Three-Piece Stainless Steel Ball Valve 2000 lb. CWP Three-Piece Stainless Steel Ball Valve 1000 lb. CWP Three-Piece Stainless Steel Ball Valve 1000 lb. CWP BM/KM/TM-590-S6-R-66-FS-LL Sizes ¹ ₂" thru 2" Threaded, Butt or Socket Weld Page 63 T/K-595-S6-R-66-LL Sizes ¹ ₄" thru 2" Threaded or Socket Weld Page 64 TM/KM-595-S6-R-66 Sizes ¹ ₄" thru 2" Threaded or Socket Weld Page 65 Pressure Temperature Chart Page 66, 67 58
Stainless Steel Ball Valves One-Piece Body Reduced Port Blowout-Proof Stem 316 SS Trim Vented Ball 2000 PSI/138 Bar Non-Shock Cold Working Pressure u CONFORMS TO MSS SP-110 1. Body Stainless Steel ASTM A 351 Type CF8M 2. Body Insert Stainless Steel ASTM A 351 Type CF8M or ASTM A 351 Type CF8M 3. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 4. Stem Stainless Steel ASTM A 276 Type 316 5. Seat Reinforced PTFE 6. Thrust Washer Reinforced PTFE (Carbon 25% + PTFE 75%) 7. 1 Stem Packing PTFE 8. Threaded Pack Gland Stainless Steel ASTM A 276 Type 316 9. Handle Nut Stainless Steel ASTM A 276 Type 304 10. Locking Handle Stainless Steel ASTM A 240 Type 304 1 ¹ ₄"-³ ₄" one each, 1"-2" two each. T-560-S6-R-66-LL Threaded 1/4" -- 3/4" 1" - 2" NOTE: Valves are static grounded by thrust washer and packing. Valves tested in accordance with ASME B16.34 T-560-S6-R-66-LL NPT x NPT Size A B D L H T-560-S6-R-66-LL Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.28 58 1.10 28.31 8 4.29 109 1.97 50.68.31 50 ³ ₈ 10 2.28 58 1.10 28.31 8 4.29 109 1.97 50.68.31 50 ¹ ₂ 15 2.60 66 1.10 28.31 8 4.29 109 1.97 50.66.30 50 ³ ₄ 20 2.83 72 1.34 34.47 12 4.29 109 2.20 56.93.42 50 1 25 3.23 82 1.61 41.62 16 5.75 146 2.56 65 1.59.72 40 1 ¹ ₄ 32 3.54 90 1.97 50.81 21 5.75 146 2.76 70 2.22 1.01 20 1 ¹ ₂ 40 3.86 98 2.24 57 1.00 25 7.40 188 3.29 84 3.22 1.46 20 2 50 4.33 110 2.76 70 1.25 32 7.40 188 3.49 89 4.65 2.11 10 ufor detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 59
Revision 2/12/2015 Stainless Steel Ball Valves One-Piece Body Reduced Port Blowout-Proof Stem 316 SS Trim Vented Ball Fire Safe 2000 PSI/138 Bar Non-Shock Cold Working Pressure u CONFORMS TO API-607 FIFTh edition Fire Safe MSS SP-110 1. Body Stainless Steel ASTM A 351 Type CF8M 2. Body Insert Stainless Steel ASTM A 351 Type CF8M or ASTM A 276 Type 316 3. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 4. Stem Stainless Steel ASTM A 276 Type 316 5. Seat Reinforced PTFE 6. Thrust Washer Reinforced PTFE (Carbon 25% + PTFE 75%) 7. 1 Stem Packing Graphoil 8. Threaded Pack Gland Stainless Steel ASTM A 276 Type 316 9. Handle Nut Stainless Steel ASTM A 276 Type 304 10. Locking Handle Stainless Steel ASTM A 240 Type 304 1 1/2"-³ ₄" one each, 1"-2" two each. T-560-S6-R-66-FS-LL Threaded 1/2" - 3/4" 1" - 2" NOTE: Valves are static grounded by thrust washer and packing. T-560-S6-R-66-FS-LL NPT x NPT Size A B D L H T-560-S6-R-66-FS-LL Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₂ 15 2.60 66 1.10 28.31 8 4.29 109 1.97 50.66.30 50 ³ ₄ 20 2.83 72 1.34 34.47 12 4.29 109 2.20 56.93.42 50 1 25 3.23 82 1.61 41.62 16 5.75 146 2.56 65 1.59.72 40 1 ¹ ₄ 32 3.54 90 1.97 50.81 21 5.75 146 2.76 70 2.22 1.01 20 1 ¹ ₂ 40 3.86 98 2.24 57 1.00 25 7.40 188 3.29 84 3.22 1.46 20 2 50 4.33 110 2.76 70 1.25 32 7.40 188 3.49 89 4.65 2.11 10 ufor detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 60
Stainless Steel Ball Valves Two-Piece Body Conventional Port Blowout-Proof Stem 316 SS Trim Cast Mounting Pad Vented Ball 2000 PSI/138 Bar Non-Shock Cold Working Pressure u CONFORMS TO MSS SP-110 1. Handle Nut Stainless Steel ASTM A 276 Type 304 2. Stem Stainless Steel ASTM A 276 Type 316 3. Lock Washer Stainless Steel 304 SS 4. Threaded Pack Gland Stainless Steel ASTM A 276 Type 316 5. Thrust Washer Carbon Filled PTFE 6. Gasket PTFE 7. Body End Piece Stainless Steel ASTM A 351 Type CF8M 8. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 9. Seat (2) Reinforced PTFE 10. Body Stainless Steel ASTM A 351 Type CF8M 11. Stem Packing (2) Carbon Filled PTFE 12. Locking Handle Stainless Steel ASTM A 240 Type 304 NOTE: Valves are static grounded by thrust washer and packing. Valves tested in accordance with ASME B16.34 T-580-S6-R-66-LL Threaded T-580-S6-R-66-LL NPT x NPT Size A B D L H T-580-S6-R-66-LL Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.07 53.83 21.37 9 1.76 45 4.33 110.51.23 10 ³ ₈ 10 2.07 53.83 21.37 9 1.76 45 4.33 110.48.22 10 ¹ ₂ 15 2.34 59 1.06 27.50 13 1.92 49 4.33 110.66.30 10 ³ ₄ 20 2.80 71 1.34 34.69 18 2.40 61 5.83 148 1.30.59 10 1 25 3.23 82 1.61 41.87 22 2.56 65 5.83 148 1.79.81 10 1 ¹ ₄ 32 3.57 91 1.89 48 1.00 25 2.74 70 7.76 197 2.52 1.14 5 1 ¹ ₂ 40 4.04 103 2.26 57 1.25 32 2.98 76 7.76 197 3.75 1.70 5 2 50 4.63 118 2.76 70 1.50 38 3.17 81 7.76 197 5.80 2.63 5 ufor detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 61
Stainless Steel Ball Valves Two-Piece Body Full Port Blowout-Proof Stem 316 SS Trim Cast Mounting Pad Vented Ball 1000 PSI/69 Bar Non-Shock Cold Working Pressure u CONFORMS TO MSS SP-110 1. Handle Nut Stainless Steel ASTM A 276 Type 304 2. Stem Stainless Steel ASTM A 276 Type 316 3. Spring Washer Stainless Steel 304 4. Threaded Pack Gland Stainless Steel ASTM A 276 Type 316 5. Thrust Washer Carbon Filled PTFE 6. Gasket PTFE 7. Body End Piece Stainless Steel ASTM A 351 Type CF8M 8. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 9. Seat (2) Reinforced PTFE 10. Body Stainless Steel ASTM A 351 Type CF8M 11. Stem Packing (2) Carbon Filled PTFE 12. Locking Handle Stainless Steel ASTM A 240 Type 304 NOTE: Valves are static grounded by thrust washer and packing. Valves tested in accordance with ASME B16.34 T-585-S6-R-66-LL Threaded T-585-S6-R-66-LL NPT x NPT Size A B D H L T-585-S6-R-66-LL Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.21 56.83 21.43 11 2.20 56 4.21 107.59.27 10 ³ ₈ 10 2.21 56.83 21.43 11 2.20 56 4.21 107.56.25 10 ¹ ₂ 15 2.60 66 1.02 26.56 14 2.30 58 4.21 107.75.34 10 ³ ₄ 20 2.99 76 1.28 33.81 21 2.79 71 5.73 146 1.47.67 10 1 25 3.54 90 1.56 40 1.00 25 2.96 75 5.73 146 2.21 1.00 10 1 ¹ ₄ 32 3.94 100 1.97 50 1.25 35 3.56 90 7.45 189 3.42 1.55 5 1 ¹ ₂ 40 4.41 112 2.20 66 1.50 38 3.84 98 7.45 189 5.20 2.36 5 2 50 5.00 127 2.76 69 2.00 50 4.24 108 8.08 205 7.99 3.63 5 ufor detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 62
Stainless Steel Ball Valves Three-Piece Body Threaded, Butt or Socket Weld Ends Blowout-Proof Stem Conventional Port Enclosed Bolt Design PTFE Seats SS Trim Cast ISO Mounting Pad Vented Ball Fire Safe 2000 PSI/138 Bar Non-Shock Cold Working Pressure u conforms to Api-607 Fourth edition fire safe MSS SP-110 MSS SP-72 (Butt weld) API 608 Anti-Static Feature 1. Stem Stainless Steel ASTM A 276 Type 316 2. Handle Nut Stainless Steel ASTM A 276 Type 304 3. Lock Washer Stainless Steel ASTM A 240 Type 304 4. Locking Handle Stainless Steel ASTM A 240 Type 304 5. Stop Plate Stainless Steel ASTM A 240 Type 304 6. Pack Gland Stainless Steel ASTM A 276 Type 316 7. Stem Packing Graphite 8. Body End Seal Graphite 9. Bolt Stainless Steel ASTM A 193 B8 Type 304 10. 1 Body End Stainless Steel ASTM A 351 Type CF8M 11. Body Stainless Steel ASTM A 351 Type CF8M 12. Ball (Vented) Stainless Steel ASTM A 351 Type CF8M or ASTM A 276 Type 316 13. Seat Reinforced PTFE 15% Glass 14. Thrust Washer Reinforced PTFE 15% Glass 15. Static Grounding Device Stainless Steel ASTM A 276 Type 304 16. Stop Pin Stainless Steel ASTM A 276 Type 304 1 Threaded Connections: CF8M, Weld Connections: CF3M. TM-590-S6-R-66-FS-LL Threaded ISO Mount Pad KM-590-S6-R-66-FS-LL Socket Weld ISO Mount Pad BM-590-S6-R-66-FS-LL Butt Weld ISO Mount Pad Note: Valves are static grounded by two ball detents that insure electro-continuity between the stem body and ball. The valve has electro-continuity across the discharge path with a resistance of not more than 10 ohms. H J K Socket Butt G Socket Socket Butt Threaded Weld Weld Size A B C D E F Thread Flange Weld Weld Weld Weight Weight Weight In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Tap Type In. mm. In mm. In. mm. Lbs. Kg. Lbs. Kg. Lbs. Kg. ¹ ₂ 15 2.72 69 2.47 63 4.07 103.43 11.12 3 1.00 25 M5 F03.86 22.38 10.84 21 1.80.82 1.70.78 1.60.73 ³ ₄ 20 2.94 75 2.70 69 4.07 103.57 14.12 3 1.00 25 M5 F03 1.08 27.50 13 1.05 27 2.40 1.09 2.30 1.05 2.20 1.00 1 25 3.50 89 3.19 81 4.92 125.81 21.18 5 1.17 30 M5 F04 1.34 34.50 13 1.32 34 3.80 1.73 3.60 1.64 3.50 1.59 1 ¹ ₄ 32 3.90 99 3.64 92 5.91 150.98 25.20 5 1.17 30 M5 F04 1.69 43.50 13 1.66 42 5.90 2.68 5.70 2.59 5.60 2.55 1 ¹ ₂ 40 4.42 112 3.88 99 7.68 195 1.25 32.23 8 1.39 35 M6 F05 1.93 49.50 13 1.90 48 7.60 3.45 7.40 3.36 7.30 1.61 2 50 5.04 128 4.09 104 7.68 195 1.50 38.23 8 1.39 35 M6 F05 2.42 61.62 16 2.38 60 10.50 4.77 10.30 4.68 10.20 4.64 u For detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 63
Stainless Steel Ball Valves Three-Piece Body Full Port Blowout-Proof Stem Full Port 316 SS Trim Vented Ball 1000 PSI/69 Bar Non-Shock Cold Working Pressure u CONFORMS TO MSS SP-110 1. Handle Nut Stainless Steel ASTM A 276 Type 304 2. Stem Stainless Steel ASTM A 276 Type 316 3. Lock Washer Stainless Steel 304 4. Stem Packing (1 Set) Carbon Filled PTFE 5. Thrust Washer Carbon Filled PTFE 6. Cap Bolt (4) Stainless Steel ASTM A 193 B8 Type 304 7. Union Seal (2) Reinforced PTFE 8. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 9. Body Stainless Steel ASTM A 351 Type CF8M 10. Seat (2) Reinforced PTFE 11. 1 Body End (2) Stainless Steel ASTM A 351 Type CF8M 12. Lock Washer (4) Stainless Steel 304 13. Threaded Pack Gland Stainless Steel ASTM A 276 Type 316 14. Locking Handle Stainless Steel ASTM A 240 Type 304 15. Cap Nut (4) Stainless Steel 304 NOTE: Valves are static grounded by thrust washer and packing. 1 Threaded Ends: CF8M, Socket Weld Ends: CF3M. T-595-S6-R-66-LL Threaded K-595-S6-R-66-LL Socket Weld (¹ ₂"-2") T/K-595-S6-R-66-LL NPT x NPT or SOC x SOC Size A D G K H L T or K-595-S6-R-25-LL Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.36 60.34 9 2.18 55 4.17 106.97.44 10 ³ ₈ 10 2.36 60.34 9 2.18 55 4.17 106.97.44 10 ¹ ₂ 15 2.76 70.56 14.38 10.86 22 2.38 60 4.17 106 1.23.56 10 ³ ₄ 20 3.03 77.81 21.50 13 1.07 27 2.87 73 5.71 145 1.91.87 10 1 25 3.62 92 1.00 25.50 13 1.34 34 2.95 75 5.71 145 2.93 1.33 8 1 ¹ ₄ 32 4.13 105 1.25 32.50 13 1.69 43 3.66 93 7.36 187 4.27 1.94 5 1 ¹ ₂ 40 4.72 110 1.50 38.50 13 1.93 49 3.94 100 7.36 187 6.01 2.73 5 2 50 5.43 138 1.97 50.62 16 2.42 61 4.25 108 7.95 202 9.50 4.32 5 ufor detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 64
Stainless Steel Ball Valves Three-Piece Body Full Port Cast ISO Mounting Pad Blowout-Proof Stem 316 SS Trim Vented Ball 1000 PSI/69 Bar Non-Shock Cold Working Pressure u CONFORMS TO MSS SP-110 1. Stop Pin Stainless Steel ASTM A 276 Type 304 2. Stop Plate Stainless Steel ASTM A 240 Type 304 3. Stem Stainless Steel ASTM A 276 Type 316 4. Handle Nut Stainless Steel 304 5. Stem Packing (1 Set) Carbon Filled PTFE 6. Thrust Washer Carbon Filled PTFE 7. Cap Bolt Stainless Steel ASTM A 193 B8 Type 304 8. 1 Body End (2) Stainless Steel ASTM A 351 Type CF8M 9. Seat (2) Reinforced PTFE 10. Body Stainless Steel ASTM A 351 Type CF8M 11. Ball (Vented) Stainless Steel ASTM A 351 Type CF8M or ASTM A 276 Type 316 12. Union Seal (2) Reinforced PTFE 13. Cap Nut (4) Stainless Steel 304 14. Threaded Pack Gland Stainless Steel ASTM A 276 Type 316 15. Handle Stainless Steel ASTM A 240 Type 304 NOTE: Valves are static grounded by thrust washer and packing. 1 Threaded Ends: CF8M, Socket Weld Ends: CF3M. TM-595-S6-R-66 Threaded ISO Mount KM-595-S6-R-66 Socket Weld (¹ ₂"-2") ISO Mount TM/KM-595-S6-R-66 NPT x NPT or SOC x SOC Size A D E F G K H L ISO TM or KM-595-S6-R-66 Master In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. 5211 Lbs. Kg. Ctn. Qty. ¹ ₄ 8 2.49 63.34 9.71 18 1.42 36 2.36 60 4.17 106 F03 1.00.45 10 ³ ₈ 10 2.49 63.34 9.71 18 1.42 36 2.36 60 4.17 106 F03 1.00.45 10 ¹ ₂ 15 2.76 70.56 14.71 18 1.42 36.38 10.87 22 2.36 60 4.17 106 F03 1.20.54 10 ³ ₄ 20 3.03 77.81 21.83 21 1.65 42.50 13 1.08 27 2.83 72 5.04 128 F04 1.90.86 10 1 25 3.63 92 1.00 25.88 22 1.65 42.50 13 1.34 34 3.07 78 5.04 128 F04 2.90 1.31 8 1 ¹ ₄ 32 4.14 105 1.25 32.98 25 1.97 50.50 13 1.69 43 3.35 85 7.83 199 F05 4.30 1.93 5 1 ¹ ₂ 40 4.73 120 1.50 38.98 25 1.97 50.50 13 1.93 49 3.66 93 7.83 199 F05 6.00 2.70 5 2 50 5.43 138 1.97 50.98 25 1.97 50.62 16 2.42 61 4.09 104 7.83 199 F05 9.50 4.28 2 u For detailed Operating Pressure, refer to Pressure Temperature Chart on pages 66 and 67. 65
Pressure Temperature Ratings Carbon and Stainless Steel Ball Valves Threaded and Socket Weld Ends One-Piece Carbon/Stainless (Cast) (Bar Stock) T-570-CS ¹ ₂"-1" T-570-CS 1¹ ₂"-2" Shaded area refers to recommended seat rating. 66
Pressure/Temperature Ratings Carbon and Stainless Steel Ball Valves Threaded, Socket, and Butt Weld Ends Two and Three-Piece Carbon/Stainless T-580-CS and S6 ¹ ₂"-1" T-580-CS and S6 1¹ ₄"-2" Shaded area refers to recommended seat rating. 67
Carbon and Stainless Steel Flanged Ball Valves Unibody and Split-Body Full Bore Carbon and Stainless Steel Flanged Ball Valve Figure Number Key F-510-CS-R-66- ** - ** End Connection Valve Type Pressure Rating Bore Size Body Material Seat Trim Material Service Prep Operator F - Flanged 5 - Floating Ball 1 - Class 150 3 - Class 300 0 - Reduced 5 - Full CS - A 216 WCB Carbon Steel S6 - A 351 CF8M Stainless Steel R - Reinforced PTFE F - Filled PTFE 66 - Stainless Steel FS - AP 1607 Fire Safe LL - Locking Lever OV - Oval LO - Locking Oval GO - Gear Operator * This key is a guide only and is not intended to infer that every valve combination will be produced. Packing and seal materials are controlled by service preparation. Oxygen Service Valves are available, consult factory. 68
One and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index Unibody Carbon Steel Flanged Ball Valve ANSI Class 150 Unibody Carbon Steel Flanged Ball Valve ANSI Class 300 Unibody Design Detail Split-Body Design Detail Page 70, 71 F-510-CS-R-66-FS Sizes ¹ ₂" thru 12" Flanged Page 72 F-530-CS-R-66-FS Sizes ¹ ₂" thru 10" Flanged Page 73 Split-Body Carbon Steel Flanged Ball Valve ANSI Class 150 Split-Body Carbon Steel Flanged Ball Valve ANSI Class 300 F-515-CS-F-66-FS Sizes ¹ ₂" thru 12" Flanged Page 74 F-535-CS-F-66-FS Sizes ¹ ₂" thru 12" Flanged Page 75 69
Flanged Ball Valves The Positive Solution For All Your Flow Control Applications. NIBCO flanged ball valves provide precision, performance and value for industrial flow control applications. The unibody and split-body valves are designed and manufactured to meet or exceed ANSI, MSS and API specifications. And both styles offer these outstanding features: A pressure-safe stem shoulder design that protects against failure under excess pressure. Tight, leakproof engineered seals and bi-directional operation. Low-friction engineered seat design for consistent and predictable low-torque operation. Pre-drilled and tapped mounting pads that allow universal mounting of actuators. Lock-out capability in either open or closed position for added safety. Available in a wide range of materials and sizes. Unibody Flanged Ball Valves A unibody design eliminates unnecessary joint faces where leakage may occur, and features a double-sealed end plug. Increased packing depth allows adequate V-ring packing to prevent leakage around the stem. Large-diameter stem provides extra protection from stresses that cause failure in smaller stems. Combination of Flexible and Braided Graphite Packing for Firesafe Applications Oval Handle with Locking Device Predrilled and Tapped Mounting Pads Double-Sealed End Plug Unibody Construction Blowout- Proof Stem Low-Friction Engineered Seat Design Positive-Stop End Piece 70
Flanged Ball Valves The Positive Solution For All Your Flow Control Applications. Split-Body Full-Bore Flanged Ball Valves Split-body design allows greater serviceability disassembles easily for repair or replacement of internal components. Full-bore design provides exceptional flow control. Multiple V-ring packing, combined with live loading, maintains packing compression under high-cycle and severe service applications. Applicable Standards NIBCO flanged ball valves conform to ASME/ANSI B16.34, ANSI B16.5, ANSI B16.10, MSS SP-72, API 598, API 607, API 608 and MSS SP-25. Special Service Applications Fire Safe Secondary metal-to-metal seal acts as backup if primary seal is destroyed by fire. Valves ordered for compliance with API 607 will be provided with graphite packing and gaskets. Oxygen Service Valves can be provided cleaned and bagged for oxygen or other special services. Multiple V-Ring Packing Split-Body Construction Locking Device Live Loading Feature Predrilled and Tapped Mounting Pads Full-Bore Design Blowout- Proof Stem Graded Body Bolts and Nuts Low-Friction Engineered Seat Design 71
Class 150 Carbon Steel Flanged Ball Valves Unibody Design Blowout-Proof Stem 316 SS Trim Mounting Pad Fire Safe Vented Ball 285 PSI/19.7 Bar Non-Shock Cold Working Pressure u CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72, API 607 Fourth edition, API 608, API 598, MSS SP 25 1. 1 Body and End Piece Carbon Steel ASTM A 216 Type WCB 2. 1 Ball (Vented) Stainless Steel ASTM A 351 Type CF8M 3. Stem Stainless Steel ASTM A 276 Type 316 4. Seat Reinforced PTFE 5. Packing Set Graphite and Braided Graphite 6. Pack Gland Stainless Steel 304 SS 7. Pack Gland Nut Carbon Steel Plated 8. O-Ring Fluorocarbon Encapsulated 9. Gasket 304 SS/Graphite Spiral Wound 1 Cast specifications shown. Smaller sizes may be manufactured from equivalent bar stock specifications. F-510-CS-R-66-FS Carbon x Stainless Flanged Size A B C D E F In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. ¹ ₂ 15 4.25 108 2.13 54.47 12 3.56 90.50 13.43 11 ³ ₄ 20 4.63 118 2.31 50.47 12 3.94 100.75 19.63 16 1 25 5.00 127 2.50 54.47 12 4.31 109 1.00 25.81 21 1 ¹ ₂ 40 6.50 165 3.25 83.56 14 5.00 127 1.50 38 1.19 30 2 50 7.00 178 3.00 76.62 16 6.00 132 2.00 51 1.50 38 3 80 8.00 203 4.00 102.75 19 7.50 191 3.00 76 2.38 60 4 100 9.00 229 4.25 108.94 24 9.00 229 4.00 102 3.00 76 6 150 10.50 267 5.25 133 1.00 25 11.00 279 6.00 152 4.38 111 8 200 11.50 297 5.50 140 1.13 29 13.50 343 8.00 203 5.68 144 10 250 13.00 330 6.50 165 1.19 30 16.00 406 10.00 254 7.50 190 12 300 14.00 356 7.38 187 1.25 32 19.00 483 12.00 305 9.50 241 Size G H I J K L M O P F-510-CS-R-66-FS In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. N In. mm. In. mm. Lbs. Kg. ¹ ₂ 15 6.63 168 2.84 72 3.16 80 2.56 65.59 15.25 6 1.68 43.250-20 1.19 30 1.19 30 3.00 1.36 ³ ₄ 20 6.63 168 3.20 81 3.58 91 2.56 65.76 19.25 6 1.68 43.250-20 1.19 30 1.19 30 5.00 2.27 1 25 6.63 168 3.45 88 3.83 97 2.56 65.93 24.31 8 1.68 43.250-20 1.19 30 1.19 30 6.00 2.72 1 ¹ ₂ 40 9.13 232 4.75 121 5.25 133 3.31 84 1.22 31.56 14 2.06 52.250-20 1.46 37 1.46 37 13.00 5.91 2 50 9.13 232 4.88 124 5.38 137 3.31 84 1.36 35.56 14 2.06 52.250-20 1.46 37 1.46 37 17.00 7.73 3 80 16.60 422 6.16 156 1.97 50.68 17 3.00 76.375-16 2.12 54 2.12 54 42.00 19.09 4 100 16.60 422 7.22 183 2.16 55.68 17 3.00 76.375-16 2.12 54 2.12 54 64.00 29.09 6 150 32.80 833 10.09 256 3.59 91 1.13 29 4.50 114.500-13 3.18 81 3.18 81 126.00 57.27 8 200 3.43 87 1.13 29 4.50 114.500-13 3.18 81 3.18 81 198.00 90.00 10 250 5.56 141 1.75 44.625-11 7.24 184 3.66 93 296.00 134.55 12 300 5.63 143 2.00 31.625-11 8.10 205 4.68 119 477.00 216.82 Note: Valves are static grounded by thrust washer. u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 81. 72
Class 300 Carbon Steel Flanged Ball Valves Unibody Design Blowout-Proof Stem 316 SS Trim Mounting Pad Fire Safe Vented Ball 740 PSI/51 Bar Non-Shock Cold Working Pressure u CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72, API 607 Fourth edition, API 608, API 598, MSS SP 25 1. 1 Body and End Piece Carbon Steel ASTM A 216 Type WCB 2. 1 Ball (Vented) Stainless Steel ASTM A 351 Type CF8M 3. Stem Stainless Steel ASTM A 276 Type 316 4. Seat Reinforced PTFE 5. Packing Set Graphite and Braided Graphite 6. Pack Gland Stainless Steel 304 SS 7. Pack Gland Nut Carbon Steel Plated 8. O-Ring Fluorocarbon Encapsulated 9. Gasket 304 SS/Graphite Spiral Wound 1 Cast specifications shown. Smaller sizes may be manufactured from equivalent bar stock specifications. F-530-CS-R-66-FS Carbon x Stainless Flanged Size A B C D E F In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. ¹ ₂ 15 5.50 140 2.13 54.59 15 3.81 97.50 13.43 11 ³ ₄ 20 6.00 152 2.31 59.65 17 4.68 119.75 19.63 16 1 25 6.50 165 2.50 64.71 18 4.94 125 1.00 25.81 21 1 ¹ ₂ 40 7.50 191 3.25 83.81 21 6.13 156 1.50 33 1.19 30 2 50 8.50 216 3.00 76.87 22 6.50 165 2.00 51 1.50 38 3 80 11.13 283 4.00 102 1.13 29 8.25 210 3.00 76 2.38 60 4 100 12.00 305 4.25 103 1.25 32 10.00 254 4.00 102 3.00 76 6 150 15.88 403 5.25 133 1.44 37 12.50 318 6.00 152 4.38 111 8 200 16.50 419 5.50 140 1.63 41 15.00 381 8.00 203 5.68 144 10 250 18.00 457 6.50 165 1.88 48 17.50 443 10.00 254 7.50 190 Size G H I J K L M O P F-530-CS-R-66-FS In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. N In. mm. In. mm. Lbs. Kg. ¹ ₂ 15 6.63 168 2.84 72 3.16 80 2.56 65.59 15.25 6 1.68 43.250-20 1.19 30 1.19 30 5.00 2.27 ³ ₄ 20 6.63 168 3.20 81 3.58 91 2.56 65.76 19.25 6 1.68 43.250-20 1.19 30 1.19 30 8.00 3.64 1 25 6.63 168 3.45 88 3.83 97 2.56 65.93 24.31 8 1.68 43.250-20 1.19 30 1.19 30 10.00 4.55 1 ¹ ₂ 40 9.13 232 4.75 121 5.25 133 3.31 84 1.22 31.56 14 2.06 52.250-20 1.46 37 1.46 37 20.00 9.09 2 50 9.13 232 4.88 124 5.38 137 3.31 84 1.36 35.56 14 2.06 52.250-20 1.46 37 1.46 37 23.00 10.45 3 80 16.60 422 6.16 156 1.97 50.68 17 3.00 76.375-16 2.12 54 2.12 54 54.00 24.55 4 100 16.60 422 7.22 183 2.16 55.68 17 3.00 76.375-16 2.12 54 2.12 54 91.50 41.59 6 150 32.80 833 10.09 256 3.59 91 1.13 29 4.50 114.500-13 3.18 81 3.18 81 181.50 82.50 8 200 3.43 87 1.13 29 4.50 114.500-13 3.18 81 3.18 81 257.00 116.82 10 250 5.56 141 1.75 44.625-11 7.24 184 3.66 93 429.00 195.00 Note: Valves are static grounded by thrust washer. u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 81. 73
Class 150 Carbon Steel Flanged Ball Valves Split-Body, Full-Bore Design Blowout-Proof Stem 316 SS Trim Multiple V-Ring Packing Mounting Pad Fire Safe Vented Ball 285 PSI/19.7 Bar Non-Shock Cold Working Pressure u CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72, API 607 Fourth edition, API 608, API 598, MSS SP 25 1. 1 Body and End Piece Carbon Steel ASTM A 216 Type WCB 2. 1 Ball (Vented) Stainless Steel ASTM A 351 Type CF8M 3. Stem Stainless Steel ASTM A 276 Type 316 4. Seat Carbon Filled PTFE 5. Packing Set Graphite and Braided Graphite 6. Pack Gland Carbon Steel Plated 7. Gasket 304 SS/Graphite Spiral Wound 8. Body Stud Carbon Steel A 193 Grade B7M 9. Heavy Hex Body Nut Carbon Steel A 194 Grade 2HM 10. Belleville Washer Stainless Steel 1 Cast specifications shown. Smaller sizes may be manufactured from equivalent bar stock specifications. Size A B C D E In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. ¹ ₂ 15 4.25 108 2.52 64.44 11 3.50 89.59 15 ³ ₄ 20 4.63 118 2.74 70.50 13 3.88 99.78 20 1 25 5.00 127 2.80 71.56 14 4.25 109.98 25 1 ¹ ₂ 40 6.50 165 3.54 90.56 14 5.00 127 1.57 40 2 50 7.00 178 3.99 101.62 16 6.00 152 2.00 51 3 80 8.00 203 4.19 106.75 19 7.50 190 3.00 76 4 100 9.00 229 4.50 114.94 24 9.00 229 4.00 102 6 150 15.50 394 8.00 203 1.00 25 11.00 279 6.00 152 8 200 18.00 457 9.00 229 1.12 28 13.50 343 8.00 203 10 250 21.00 533 10.50 267 1.19 30 16.00 406 10.08 256 12 300 24.00 670 12.00 305 1.25 32 19.00 483 12.09 307 ¹ ₂"-8" 10"-12" F-515-CS-F-66-FS Carbon x Stainless Flanged Size G H J K L O *P Q R F-515-CS-F-66-FS In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. N In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹ ₂ 15 5.12 130 3.52 89.47 12 1.00 25.19 5.250-20 3.75 95 2.00 51 4.00 1.82 ³ ₄ 20 6.10 155 4.13 105.69 18 1.26 32.31 8.250-20 3.94 100 2.00 51 6.00 2.72 1 25 6.10 155 4.25 109.63 17 1.26 32.31 8.312-18 4.19 105 1.75 44 8.00 3.64 1 ¹ ₂ 40 9.06 230 4.97 126 1.50 38 1.68 43.47 12.312-18 5.63 143 1.75 44 17.00 7.73 2 50 9.03 230 5.66 144 1.81 46 1.66 42.63 16.312-18 6.32 161 2.25 57 26.00 11.82 3 80 12.63 321 7.38 187 2.65 67 2.13 54.78 20.375-16 4.13 105 1.57 40 7.12 181 3.50 89 49.00 22.27 4 100 15.75 400 8.09 205 2.59 66 2.13 54.78 20.437-14 4.13 105 1.57 40 8.00 203 4.00 102 75.00 34.09 6 150 31.50 800 10.65 271 3.68 93 2.58 66 1.10 28.437-14 4.96 126 2.36 60 14.44 367 4.00 102 171.00 77.73 8 200 4.53 115 2.53 65 1.17 30.500-13 4.96 126 2.36 60 16.81 427 7.62 104 322.00 146.36 10 250 5.83 148 3.01 76 1.57 40.625-11 5.90 150 2.75 70 19.75 502 8.66 220 483.00 219.55 12 300 5.69 145 3.01 76 1.57 40.625-11 5.90 150 2.75 70 22.69 576 9.45 240 659.00 298.55 * Not drilled and tapped on ¹ ₂"-2". Note: Valves are static grounded by thrust washer. u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 81. 74
Class 300 Carbon Steel Flanged Ball Valves Split-Body, Full-Bore Design Blowout-Proof Stem 316 SS Trim Multiple V-Ring Packing Mounting Pad Fire Safe Vented Ball 740 PSI/51 Bar Non-Shock Cold Working Pressure u CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72, API 607 Fourth edition, API 608, API 598, MSS SP 25 1. 1 Body and End Piece Carbon Steel ASTM A 216 Type WCB 2. 1 Ball (Vented) Stainless Steel ASTM A 351 Type CF8M 3. Stem Stainless Steel ASTM A 276 Type 316 4. Seat Carbon Filled PTFE 5. Packing Set Graphite and Braided Graphite 6. Pack Gland Carbon Steel Plated 7. Gasket 304 SS/Graphite Spiral Wound 8. Body Stud Carbon Steel A 193 Grade B7M 9. Heavy Hex Body Nut Carbon Steel A 194 Grade 2HM 10. Belleville Washer Stainless Steel 1 Cast specifications shown. Smaller sizes may be manufactured from equivalent bar stock specifications. Size A B C D E In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. ¹ ₂ 15 5.50 140 3.14 80.56 14 3.75 95.59 15 ³ ₄ 20 6.00 152 3.43 87.62 16 4.63 118.78 20 1 25 6.50 165 3.55 90.69 18 4.88 124.98 25 1 ¹ ₂ 40 7.50 191 4.13 105.81 21 6.13 156 1.57 40 2 50 8.50 216 4.74 120.88 22 6.50 165 2.00 51 3 80 11.12 253 5.56 141 1.12 28 8.25 210 3.00 76 4 100 12.00 305 6.01 156 1.25 32 10.00 254 4.00 102 6 150 15.87 403 7.96 202 1.44 37 12.50 318 6.00 152 8 200 19.75 502 9.87 251 1.62 41 15.00 381 8.00 203 10 250 22.38 569 11.19 234 1.88 48 17.50 445 10.08 256 12 300 25.50 649 12.75 324 2.00 51 20.50 521 12.09 307 ¹ ₂"-8" 10"-12" F-535-CS-F-66-FS Carbon x Stainless Flanged Size G H J K L O *P Q R F-535-CS-F-66-FS In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. N In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹ ₂ 15 5.12 130 3.52 89.34 9 1.00 25.19 5.250-20 4.85 123 2.00 51 7.00 3.18 ³ ₄ 20 6.10 155 4.13 105.43 11 1.26 32.31 8.250-20 5.28 134 2.00 51 9.00 4.09 1 25 6.10 155 4.25 109.45 11 1.26 32.31 8.312-18 5.69 145 1.75 44 11.00 5.00 1 ¹ ₂ 40 9.06 230 4.97 126.92 23 1.68 43.47 12.312-18 6.56 167 1.75 44 24.50 11.14 2 50 9.06 230 5.66 144 1.58 40 1.66 42.63 16.312-18 7.50 191 2.25 57 33.00 15.00 3 80 15.75 400 7.38 187 2.26 57 2.13 54.78 20.375-16 4.13 105 1.57 40 9.94 252 3.50 89 72.00 32.73 4 100 15.75 400 8.09 205 2.10 53 2.13 54.78 20.437-14 4.13 105 1.57 40 10.69 272 4.00 102 116.00 52.73 6 150 2.93 74 2.58 66 1.10 28.437-14 4.96 126 2.36 60 14.38 365 4.00 102 228.00 103.64 8 200 4.43 113 2.53 65 1.17 30.500-13 4.96 126 2.36 60 18.06 459 6.46 154 352.00 160.00 10 250 5.08 129 3.01 76 1.57 40.625-11 5.90 150 2.75 70 20.43 514 8.66 220 560.00 254.53 12 300 4.97 126 3.01 76 1.57 40.625-11 5.90 150 2.75 70 23.44 595 9.45 240 765.00 347.73 * Not drilled and tapped on ¹ ₂"-2". Note: Valves are static grounded by thrust washer. u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 81. 75
One and Two-Piece Stainless Steel Ball Valves Illustrated Index Unibody Stainless Steel Flanged Ball Valve ANSI Class 150 Unibody Stainless Steel Flanged Ball Valve ANSI Class 300 F-510-S6-R-66-FS Sizes ¹ ₂" thru 12" Flanged Page 77 F-530-S6-R-66-FS Sizes ¹ ₂" thru 12" Flanged Page 78 Split-Body Stainless Steel Flanged Ball Valve ANSI Class 150 Split-Body Stainless Steel Flanged Ball Valve ANSI Class 300 F-515-S6-F-66-FS Sizes ¹ ₂" thru 12" Flanged Page 79 F-535-S6-F-66-FS Sizes ¹ ₂" thru 12" Flanged Page 80 Pressure Temperature Chart Page 81 76
Class 150 Stainless Steel Flanged Ball Valves Unibody Design Blowout-Proof Stem 316 SS Trim Mounting Pad Fire Safe Vented Ball 275 PSI/19 Bar Non-Shock Cold Working Pressure u CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72, API 607 Fourth edition, API 608, API 598, MSS SP 25 1. 1 Body and End Piece Stainless Steel ASTM A 351 Type CF8M 2. 1 Ball (Vented) Stainless Steel ASTM A 351 Type CF8M 3. Stem Stainless Steel ASTM A 276 Type 316 4. Seat Reinforced PTFE 5. Packing Set Graphite and Braided Graphite 6. Pack Gland Stainless Steel 304 SS 7. Pack Gland Nut Stainless Steel 8. O-Ring Fluorocarbon Encapsulated 9. Gasket 304 SS/Graphite Spiral Wound 1 Cast specifications shown. Smaller sizes may be manufactured from equivalent bar stock specifications. F-510-S6-R-66-FS Stainless x Stainless Flanged Size A B C D E F In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. ¹ ₂ 15 4.25 108 2.13 54.47 12 3.56 90.50 13.43 11 ³ ₄ 20 4.63 118 2.31 50.47 12 3.94 100.75 19.63 16 1 25 5.00 127 2.50 54.47 12 4.31 109 1.00 25.81 21 1 ¹ ₂ 40 6.50 165 3.25 83.56 14 5.00 127 1.50 38 1.19 30 2 50 7.00 178 3.00 76.62 16 6.00 132 2.00 51 1.50 38 3 80 8.00 203 4.00 102.75 19 7.50 191 3.00 76 2.38 60 4 100 9.00 229 4.25 108.94 24 9.00 229 4.00 102 3.00 76 6 150 10.50 267 5.25 133 1.00 25 11.00 279 6.00 152 4.38 111 8 200 11.50 297 5.50 140 1.13 29 13.50 343 8.00 203 5.68 144 10 250 13.00 330 6.50 165 1.19 30 16.00 406 10.00 254 7.50 190 12 300 14.00 356 7.38 187 1.25 32 19.00 483 12.00 305 9.50 241 Size G H I J K L M O P F-510-S6-R-66-FS In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. N In. mm. In. mm. Lbs. Kg. ¹ ₂ 15 6.63 168 2.84 72 3.16 80 2.56 65.59 15.25 6 1.68 43.250-20 1.19 30 1.19 30 3.00 1.36 ³ ₄ 20 6.63 168 3.20 81 3.58 91 2.56 65.76 19.25 6 1.68 43.250-20 1.19 30 1.19 30 5.00 2.27 1 25 6.63 168 3.45 88 3.83 97 2.56 65.93 24.31 8 1.68 43.250-20 1.19 30 1.19 30 6.00 2.72 1 ¹ ₂ 40 9.13 232 4.75 121 5.25 133 3.31 84 1.22 31.56 14 2.06 52.250-20 1.46 37 1.46 37 13.00 5.91 2 50 9.13 232 4.88 124 5.38 137 3.31 84 1.36 35.56 14 2.06 52.250-20 1.46 37 1.46 37 17.00 7.73 3 80 16.60 422 6.16 156 1.97 50.68 17 3.00 76.375-16 2.12 54 2.12 54 42.00 19.09 4 100 16.60 422 7.22 183 2.16 55.68 17 3.00 76.375-16 2.12 54 2.12 54 64.00 29.09 6 150 32.80 833 10.09 256 3.59 91 1.13 29 4.50 114.500-13 3.18 81 3.18 81 126.00 57.27 8 200 3.43 87 1.13 29 4.50 114.500-13 3.18 81 3.18 81 198.00 90.00 10 250 5.56 141 1.75 44.625-11 7.24 184 3.66 93 296.00 134.55 12 300 5.63 143 2.00 31.625-11 8.10 205 4.68 119 477.00 216.82 Note: Valves are static grounded by thrust washer. u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 81. 77
Class 300 Stainless Steel Flanged Ball Valves Unibody Design Blowout-Proof Stem 316 SS Trim Mounting Pad Fire Safe Vented Ball 720 PSI/50 Bar Non-Shock Cold Working Pressure u CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72, API 607 Fourth edition, API 608, API 598, MSS SP 25 1. 1 Body and End Piece Stainless Steel ASTM A 351 Type CF8M 2. 1 Ball (Vented) Stainless Steel ASTM A 351 Type CF8M 3. Stem Stainless Steel ASTM A 276 Type 316 4. Seat Reinforced PTFE 5. Packing Set Graphite and Braided Graphite 6. Pack Gland Stainless Steel 304 SS 7. Pack Gland Nut Stainless Steel 8. O-Ring Fluorocarbon Encapsulated 9. Gasket 304 SS/Graphite Spiral Wound 1 Cast specifications shown. Smaller sizes may be manufactured from equivalent bar stock specifications. F-530-S6-R-66-FS Stainless x Stainless Flanged Size A B C D E F In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. ¹ ₂ 15 5.50 140 2.13 54.59 15 3.81 97.50 13.43 11 ³ ₄ 20 6.00 152 2.31 59.65 17 4.68 119.75 19.63 16 1 25 6.50 165 2.50 64.71 18 4.94 125 1.00 25.81 21 1 ¹ ₂ 40 7.50 191 3.25 83.81 21 6.13 156 1.50 33 1.19 30 2 50 8.50 216 3.00 76.87 22 6.50 165 2.00 51 1.50 38 3 80 11.13 283 4.00 102 1.13 29 8.25 210 3.00 76 2.38 60 4 100 12.00 305 4.25 108 1.25 32 10.00 254 4.00 102 3.00 76 6 150 15.88 403 5.25 133 1.44 37 12.50 318 6.00 152 4.38 111 8 200 16.50 419 5.50 140 1.63 41 15.00 381 8.00 203 5.68 144 10 250 18.00 457 6.50 165 1.88 48 17.50 443 10.00 254 7.50 190 Size G H I J K L M O P F-530-S6-R-66-FS In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. N In. mm. In. mm. Lbs. Kg. ¹ ₂ 15 6.63 168 2.84 72 3.16 80 2.56 65.59 15.25 6 1.68 43.250-20 1.19 30 1.19 30 5.00 2.27 ³ ₄ 20 6.63 168 3.20 81 3.58 91 2.56 65.76 19.25 6 1.68 43.250-20 1.19 30 1.19 30 8.00 3.64 1 25 6.63 168 3.45 88 3.83 97 2.56 65.93 24.31 8 1.68 43.250-20 1.19 30 1.19 30 10.00 4.55 1 ¹ ₂ 40 9.13 232 4.75 121 5.25 133 3.31 84 1.22 31.56 14 2.06 52.250-20 1.46 37 1.46 37 20.00 9.09 2 50 9.13 232 4.88 124 5.38 137 3.31 84 1.36 35.56 14 2.06 52.250-20 1.46 37 1.46 37 23.00 10.45 3 80 16.60 422 6.16 156 1.97 50.68 17 3.00 76.375-16 2.12 54 2.12 54 54.00 24.55 4 100 16.60 422 7.22 183 2.16 55.68 17 3.00 76.375-16 2.12 54 2.12 54 91.50 41.59 6 150 3.59 91 1.13 29 4.50 114.500-13 3.18 81 3.18 81 181.50 82.50 8 200 3.43 87 1.13 29 4.50 114.500-13 3.18 81 3.18 81 257.00 116.82 10 250 5.56 141 1.75 44.625-11 7.24 184 3.66 93 429.00 195.00 Note: Valves are static grounded by thrust washer. For detailed Operating Pressure, refer to Pressure Temperature Chart on page 81. 78
Class 150 Stainless Steel Flanged Ball Valves Split-Body, Full-Bore Design Blowout-Proof Stem 316 SS Trim Multiple V-Ring Packing Mounting Pad Fire Safe Vented Ball 275 PSI/19 Bar Non-Shock Cold Working Pressure u CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72, API 607 Fourth edition, API 608, API 598, MSS SP 25 1. Body and End Piece Stainless Steel ASTM A 351 Type CF8M 2. 1 Ball (Vented) Stainless Steel ASTM A 351 Type CF8M 3. Stem Stainless Steel ASTM A 276 Type 316 4. Seat Reinforced PTFE 5. Packing Set Graphite and Braided Graphite 6. Pack Gland Stainless Steel ASTM A 276 Type 316 7. Gasket 304 SS/Graphite Spiral Wound 8. Body Stud Stainless Steel ASTM A 193 Grade B8 SS 9. Heavy Hex Body Nut Stainless Steel ASTM A 194 Grade 8 SS 10. Belleville Washer Stainless Steel 1 Cast specifications shown. Smaller sizes may be manufactured from equivalent bar stock specifications. Size A B C D E In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. ¹ ₂ 15 4.25 108 2.52 64.44 11 3.50 89.59 15 ³ ₄ 20 4.63 118 2.74 70.50 13 3.88 99.78 20 1 25 5.00 127 2.80 71.56 14 4.25 108.98 25 1 ¹ ₂ 40 6.50 165 3.54 90.56 14 5.00 127 1.57 40 2 50 7.00 178 3.99 101.62 16 6.00 152 2.00 51 3 80 8.00 203 4.19 106.75 19 7.50 190 3.00 76 4 100 9.00 229 4.50 114.94 24 9.00 229 4.00 102 6 150 15.50 394 8.00 203 1.00 25 11.00 279 6.00 152 8 200 18.00 457 9.00 229 1.12 28 13.50 343 8.00 203 10 250 21.00 533 10.50 267 1.19 30 16.00 406 10.08 256 12 300 24.00 670 12.00 305 1.25 32 19.00 483 12.09 307 ¹ ₂"-8" F-515-S6-F-66-FS Stainless x Stainless Flanged Size G H J K L O *P Q R F-515-S6-F-66-FS In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. N In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹ ₂ 15 5.12 130 3.52 89.47 12 1.00 25.19 5.250-20 3.75 95 2.00 51 4.00 1.82 ³ ₄ 20 6.10 155 4.13 105.69 18 1.26 32.31 8.250-20 3.94 100 2.00 51 6.00 2.72 1 25 6.10 155 4.25 108.63 17 1.26 32.31 8.312-18 4.19 105 1.75 44 8.00 3.64 1 ¹ ₂ 40 9.06 230 4.97 126 1.50 38 1.68 43.47 12.312-18 5.63 143 1.75 44 17.00 7.73 2 50 9.06 230 5.66 144 1.81 46 1.66 42.63 16.312-18 6.32 161 2.25 57 26.00 11.82 3 80 12.63 321 7.38 187 2.65 67 2.13 54.78 20.375-16 4.13 105 1.57 40 7.12 181 3.50 89 49.00 22.27 4 100 15.75 400 8.09 205 2.59 66 2.13 54.78 20.437-14 4.13 105 1.57 40 8.00 203 4.00 102 75.00 34.09 6 150 31.50 800 10.65 271 3.68 93 2.58 66 1.10 28.437-14 4.96 126 2.36 60 14.44 367 4.00 102 171.00 77.73 8 200 4.53 115 2.53 65 1.17 30.500-13 4.96 126 2.36 60 16.81 427 7.62 104 322.00 146.36 10 250 5.83 148 3.01 76 1.57 40.625-11 5.90 150 2.75 70 19.75 502 8.66 220 483.00 219.55 12 300 5.69 145 3.01 76 1.57 40.625-11 5.90 150 2.75 70 22.69 576 9.45 240 659.00 298.55 * Not drilled and tapped on ¹ ₂"-2". Note: Valves are static grounded by thrust washer. u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 81. 79
Class 300 Stainless Steel Flanged Ball Valves Split-Body, Full-Bore Design Blowout-Proof Stem 316 SS Trim Multiple V-Ring Packing Mounting Pad Fire Safe Vented Ball 720 PSI/50 Bar Non-Shock Cold Working Pressure u CONFORMS TO ASME/ANSI B16.34, B16.5, MSS SP 72, API 607 Fourth edition, API 608, API 598, MSS SP 25 1. Body and End Piece Stainless Steel ASTM A 351 Type CF8M 2. 1 Ball (Vented) Stainless Steel ASTM A 351 Type CF8M 3. Stem Stainless Steel ASTM A 276 Type 316 4. Seat Carbon Filled PTFE 5. Packing Set Graphite and Braided Graphite 6. Pack Gland Stainless Steel ASTM A 276 Type 316 7. Gasket 304 SS/Graphite Spiral Wound 8. Body Stud Stainless Steel ASTM A 193 Grade B8 SS 9. Heavy Hex Body Nut Stainless Steel ASTM A 194 Grade 8 SS 10. Belleville Washer Stainless Steel 1 Cast specifications shown. Smaller sizes may be manufactured from equivalent bar stock specifications. Size A B C D E In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. ¹ ₂ 15 5.50 140 3.14 80.56 14 3.75 95.59 15 ³ ₄ 20 6.00 152 3.43 81.62 16 4.63 118.78 20 1 25 6.50 165 3.55 90.69 18 4.88 124.98 25 1 ¹ ₂ 40 7.50 191 4.13 105.81 21 6.13 156 1.57 40 2 50 8.50 216 4.74 120.88 22 6.50 165 2.00 51 3 80 11.12 253 5.56 141 1.12 28 8.25 210 3.00 76 4 100 12.00 305 6.01 156 1.25 32 10.00 254 4.00 102 6 150 15.87 403 7.96 202 1.44 37 12.50 318 6.00 152 8 200 19.75 502 9.87 251 1.62 41 15.00 381 8.00 203 10 250 22.38 569 11.19 234 1.88 48 17.50 445 10.08 256 12 300 25.50 649 12.75 324 2.00 51 20.50 521 12.09 307 ¹ ₂"-8" F-535-S6-F-66-FS Stainless x Stainless Flanged 10"-12" Size G H J K L O *P Q R F-535-S6-F-66-FS In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. N In. mm. In. mm. In. mm. In. mm. Lbs. Kg. ¹ ₂ 15 5.12 130 3.52 89.34 9 1.00 25.19 5.250-20 4.85 123 2.00 51 7.00 3.18 ³ ₄ 20 6.10 155 4.13 105.43 11 1.26 32.31 8.250-20 5.28 134 2.00 51 9.00 4.09 1 25 6.10 155 4.25 108.45 11 1.26 32.31 8.312-18 5.69 145 1.75 44 11.00 5.00 1 ¹ ₂ 40 9.06 230 4.97 126.92 23 1.68 43.47 12.312-18 6.56 167 1.75 44 24.50 11.14 2 50 9.06 230 5.66 144 1.58 40 1.66 42.63 16.312-18 7.50 191 2.25 57 33.00 15.00 3 80 15.75 400 7.38 187 2.26 57 2.13 54.78 20.375-16 4.13 105 1.57 40 9.94 252 3.50 89 72.00 32.73 4 100 15.75 400 8.09 205 2.10 53 2.13 54.78 20.437-14 4.13 105 1.57 40 10.69 272 4.00 102 116.00 52.73 6 150 2.93 74 2.58 66 1.10 28.437-14 4.96 126 2.36 60 14.38 365 4.00 102 228.00 103.64 8 200 4.43 113 2.53 65 1.17 30.500-13 4.96 126 2.36 60 18.06 459 6.46 154 352.00 160.00 10 250 5.08 129 3.01 76 1.57 40.625-11 5.90 150 2.75 70 20.43 514 8.66 220 560.00 254.53 12 300 4.97 126 3.01 76 1.57 40.625-11 5.90 150 2.75 70 23.44 595 9.45 240 765.00 347.73 * Not drilled and tapped on ¹ ₂"-2". Note: Valves are static grounded by thrust washer. u For detailed Operating Pressure, refer to Pressure Temperature Chart on page 81. 80
Pressure Temperature Ratings for NIBCO Flanged Ball Valve Seat Materials Shaded area refers to recommended seat rating. 81
Bronze, Carbon and Stainless Steel Ball Valves Options and Accessories Index Bronze Threaded, Solder and Grooved Ball Valves... 83-85 Handle Options...83 NIB-SEAL Technical Data...84 Stainless Steel Ball and Stem...85 Oxygen Service...85 Vented Ball...85 Use of Silicone...85 Static Grounding...85 Actuation...85 Carbon and Stainless Steel Threaded, Socket and Butt Weld Ball Valves... 86 Handle Options...86 Stainless Steel Ball and Stem...86 Vented Ball...86 Use of Silicone...86 Static Grounding...86 Fire Rated...86 Actuation...86 Carbon and Stainless Steel Flanged Ball Valves....87 Handle Options...87 Stainless Steel Ball and Stem...87 Oxygen Service...87 Vented Ball...87 Use of Silicone...87 Static Grounding...87 Fire Rated...87 Actuation...87 Quick Reference Chart for Ball Valve Options and Accessories...88 Ball Valve Seat Materials... 89-90 82
Bronze Threaded, Solder and Grooved Ball Valves Handle Options and Accessories A wide variety of handles are available to fulfill safety and operation requirements in various processing and manufacturing industries. The lever handle with plastic cover is standard. Other handle options are shown. Stainless steel lever handles are available, as an option, also with plastic covers. If an optional handle is desired, please indicate which one when ordering. Many of these options are field assembly only. CS Standard Lever Handle CS Extended Lever Handle with Memory Stop Allows for 2" of Insulation NIB-SEAL Handle Allows for 2" of Insulation CS Locking Lever Handle CS Round Handle Vertical Chain Lever SS Standard Lever Handle CS Extended Round Handle Allows for 2" of Insulation Horizontal Chain Lever SS Locking Lever Handle CS Wing Handle Memory Stop Kit CS Extended Lever Handle Allows for 2" of Insulation Seat and Seal Kit 83
Bronze Threaded, Solder, NIBCO Press System and Grooved Ball Valves NIB-SEAL Technical Data NIBCO bronze ball valves installed with NIB-SEAL insulated handles are the only approach that keeps your insulated piping system completely intact. The revolutionary NIB-SEAL insulated handle system used with a NIBCO bronze ball valve, stops condensate, cold. Its unique thermal barrier design keeps moisture from infiltrating your insulated system while preventing thermal energy loss through exposed metal handles. Designed for new installations or retrofitting existing systems, NIB-SEAL bronze ball valves offer a wide range of advantages for typical commercial HVAC systems as well as industrial applications where insulated piping is desirable. In addition, the NIB-SEAL handle was tested to UL 2043 and is UL listed for installation in air-handling spaces (plenums). Protective sleeve provides a stationary surface to affix the insulation, allowing operation of the valve without destroying the integrity of the insulated system. High-strength cylindrical handle design features easy access to standard adjustable memory stop for system balancing. Cap and insulating plug provide a vapor seal to prevent exchange of air, to maximize the efficiency of your insulated piping system. Position indicators allow at-a-glance determination of whether valve is in open or closed position. Preformed hole allows for convenient tagging. Cap keeps moisture-laden air out to reduce chance of condensate formation Temperature range: 15 F to 250 F Not intended for steam applications in excess of 15 PSI Insulation plug provides vapor seal, keeping air from infiltrating the insulated system Handle nut Indicator gives at-a-glance valve position Memory stop plate and screws for system balancing Preformed hole for identification tag Extension handle of durable non-thermal conductive CPVC prevents formation of condensation Protective sleeve allows operation of valve handle and maintenance of valve packing while maintaining integrity of piping insulation NIBCO two-piece or three-piece bronze ball valve is an integral part of the NIB-SEAL valve system Valve Series Valve Series 580-70*/590* 585-70/595 Size C E F C E F.250 3.750 2.188 4.25.375 3.750 2.188 4.25.500 3.750 2.188 4.25 3.750 2.188 4.25.750 3.750 2.188 4.25 4.000 2.188 4.25 1.000 4.000 2.188 4.25 4.25 2.188 4.25 1.250 4.250 2.188 4.25 5.375 3.375 6.50 1.500 5.375 3.375 6.50 5.563 3.375 6.50 2.000 5.563 3.375 6.50 5.875 3.375 6.50 2.500 5.875 3.375 6.50 *Use 585-70/595 for 1/4" - 1" For bronze ball valves with factory-installed NIB-SEAL insulated handle, order appropriate NIBCO valve figure number with suffix NS. Example: T-585-70-NS, 1/2" NIB-SEAL on sweat ball valves are shipped unassembled. Sample For piping systems requiring up to 2" of insulation, specify a non-conductive CPVC extended-handle bronze ball valve tested to UL 2043, is UL listed for installation in air handling spaces (plenums),that offers a vapor seal, adjustable memory stop, position indicators and convenient valve packing maintenance all without disturbing the insulation. Specify NIB-SEAL insulated handle. Example: T-585-70-NS 84
Bronze Threaded, Solder and Grooved Ball Valves Options and Accessories (continued) Stainless Steel Ball and Stem 316 stainless steel ball and stem are available on many NIBCO ball valves see catalog specification sheets to identify what valves are available or consult factory. Static Grounding NIBCO provides static grounding standard on most carbon, stainless steel and bronze three-piece ball valves. See product pages for availability. Oxygen Service Many NIBCO ball valves are available for oxygen service. Cleaned and packaged in durable, sealed plastic bags to avoid contamination. Oxygen cleaned valves are not recommended for pressures exceeding 200 PSI. The steps involved are as follows: 1) Clean ultrasonically all component parts with a degreaser in a warm water solution. 2) Rinse with warm water in an ultrasonic bath. Rinse again in cold water. 3) Put all component parts under black light for inspection of any carbon. If carbon is found, repeat steps above. 4) Assemble and test valves. 5) Package the valves in a sealed plastic bag to avoid contamination. Vented Ball NIBCO provides vented balls as standard on all carbon and stainless steel ball valves and bronze T-560s with stainless steel balls. For other bronze ball valves, vented balls are only available with stainless steel trim option see catalog specification sheets to identify what valves are available or consult factory. Actuation Engineered with a modular approach, NIBCO electric and pneumatic actuation systems give you flexibility to actuate new valves or retrofit existing valves. NIBCO electric actuators, and NDA and NSR pneumatic actuators feature ISO standard mount and drive (exception is 800 series). No Silicone Used Silicone Free Issue All NIBCO pressure-rated bronze gate, globe, check and bronze ball valves are manufactured at NIBCO plants in Nacogdoches, Texas, and Reynosa, Mexico. Silicone is not used in these plants in the production of valves or assembly of any component parts of the above listed products. Note: Valves that are assembled and tested without silicone lubricants in these plants have a potential exposure to air-borne silicone as well as during shipping after they leave the plant. Therefore, NIBCO cannot certify valves produced in the Nacogdoches or Reynosa plants to be 100% silicone free. 85
Carbon and Stainless Steel Threaded, Socket and Butt Weld Ball Valves Options and Accessories CS Standard Lever Hdle. CS Locking Lever Hdle. SS Standard Lever Hdle. SS Locking Lever Hdle. SS Oval Hdle. SS Locking Oval Hdle. Seat and Seal Kit (available for fire safe, R ) Handle Options A wide variety of handles are available to fulfill safety and operations requirements in various processing and manufacturing industries. All handles come standard with plastic covers. All carbon steel body ball valves come with carbon steel handles. All stainless steel body ball valves come with stainless steel handles. Many of these options are field assembly only. Stainless Steel Ball and Stem 316 stainless steel ball and stem are available on many NIBCO ball valves see catalog specification sheets to identify what valves are available or consult factory. Vented Ball NIBCO provides vented balls as standard on all carbon and stainless steel ball valves and bronze T-560s with stainless steel balls. For other bronze ball valves, vented balls may be available see catalog specification sheets to identify what valves are available or consult factory. Fire Rated Valves feature as standard secondary metal-to-metal seal in the event of the primary seat being destroyed by fire. Valves ordered for compliance with API 607 will be provided with graphite packing. Fire rated/fire safe valves are available in NIBCO models #s 510, 515, 530, 535, 560, 565 and 590. Static Grounding NIBCO provides static grounding standard on most carbon, stainless steel and bronze three-piece ball valves. Actuation Engineered with a modular approach, NIBCO electric and pneumatic actuation systems give you flexibility to actuate new valves or retrofit existing valves. NIBCO electric actuators, and NDA and NSR pneumatic actuators feature ISO standard mount and drive (exception is 800 series). No Silicone Used Silicone Free Issue All NIBCO pressure rated carbon and stainless steel ball valves are manufactured with no silicone used in the production of valves or assembly of any component parts. Note: Valves that are assembled and tested without silicone lubricants have a potential exposure to air-borne silicone as well as during shipping after they leave the plant. Therefore, NIBCO cannot certify that our carbon and stainless steel ball valves are 100% silicone free. 86
Carbon and Stainless Steel Flanged Ball Valves Options and Accessories CS Oval Locking Hdle. SS Oval Locking Hdle. Gear Operator Handle Options A wide variety of handles are available to fulfill safety and operations requirements in various processing and manufacturing industries. All handles come standard with plastic covers. All carbon steel body ball valves come with carbon steel lever handles. All stainless steel body ball valves come with stainless steel lever handles. Many of these options may be field assembly only. Stainless Steel Ball and Stem 316 stainless steel ball and stem are available on many NIBCO ball valves see catalog specification sheets to identify what valves are available or consult factory. Oxygen Service Many NIBCO ball valves are available for oxygen service. Cleaned and packaged in durable, sealed plastic bags to avoid contamination. Oxygen cleaned valves are not recommended for pressures exceeding 200 PSI. The steps involved are as follows: 1) Clean ultrasonically all component parts with a degreaser in a warm water solution. 2) Rinse with warm water in an ultrasonic bath. Rinse again in cold water. 3) Put all component parts under black light for inspection of any carbon. If carbon is found, repeat steps above. 4) Assemble and test valves. 5) Package the valves in a sealed plastic bag to avoid contamination. Vented Ball NIBCO provides vented balls as standard on all carbon and stainless steel ball valves and bronze T-560s with stainless steel balls. For other bronze ball valves, vented balls may be available see catalog specification sheets to identify what valves are available or consult factory. Seat and Seal Kit (available in fire safe F, N ) Fire Rated Valves feature as standard secondary metal-to-metal seal in the event of the primary seat being destroyed by fire. Valves ordered for compliance with API 607 will be provided with graphite packing. Fire rated/fire safe valves are available in NIBCO models #s 510, 515, 530, 535, 560, 565 and 590. Static Grounding NIBCO provides static grounding standard on most carbon, stainless steel and bronze three-piece ball valves. Actuation Engineered with a modular approach, NIBCO electric and pneumatic actuation systems give you flexibility to actuate new valves or retrofit existing valves. NIBCO electric actuators, and NDA and NSR pneumatic actuators feature ISO standard mount and drive (exception is 800 series). No Silicone Used Silicone Free Issue At times NIBCO standard flanged ball valves may incorporate the use of silicone during assembly. Flanged ball valves can be special ordered as Assemble-Dry without test. These valves will be assembled not using silicone in the form of grease or aerosol spray. Note: Even though provisions are made to assemble valves and not incorporate the use of silicone lubricants, the potential for it to be present as air-borne particles prevents us from certifying that our valves are 100% silicone free. 87
Ball Valve Options Quick Reference Std. = Standard = Factory Installed * = Field Retrofit 1 = Not all sizes available, consult factory. 2 = Available on certain models, consult factory. 3 = Specify TM, KM or BM Bronze Carbon Steel Stainless Steel Flanged 560 580-70 590-Y 560 580 TC 590 595 560 580 585 590 595 Option -BR 585-70 595-Y -CS 570 -CS -580 -CS -CS -S6 -S6 -S6 -S6 -S6 510 515 530 535 565 End-Type Threaded Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Solder Std. Std. Grooved Std. Socket Weld Std. Std. Std. Std. Butt Weld Std. Std. Flanged Std. Std. Std. Std. Std. Seat Material PTFE (Virgin) (-Y) Std. Std. RPTFE (Glass Filled) (-R) Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. FPTFE (Carbon Graphite) (-F) Std. Std. Nylon (-N) Std. Handles CS Standard Lever Hdle. Std. Std. Std. Std. Std. Std. Std. * * * * * CS Locking Lever Hdle. * Std. Std. Std. CS Extended Lever Hdle. * *1 CS Extended Lever Hdle. w/memory stop *1 *1 CS Round Hdle. * * *1 CS Extended Round Hdle. * *1 CS Oval Hdle. CS Locking Oval Hdle. *2 *2 CS Extended T Hdle. * *1 CS Horizontal Chain Lever Hdle. * CS Vertical Chain Lever Hdle. * CS Wing Hdle. *1 *1 SS Standard Lever Hdle. * * * Std. * Std. * * * * * SS Locking Lever Hdle. * * * * * * * Std. Std. Std. Std. SS Oval Hdle. * * * * * * * * * SS Locking Oval Hdle. * * * * * * * *2 *2 NIB-SEAL Hdle. 1 Memory Stop *1 Other Options Actuation *3 * * *3 * * *3 * * * * * Anti-Static/Grounded Stem Std. 2 Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Fire Rated Std. Std. Std. Std. Gear Operator * * * * * No Silicone Used Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Oxygen Cleaned Seat and Seal Kit Non FS * * * * Seat and Seal Kit FS * * * * * * SS Trim Std. Std. Std. Std. Std. Vented Ball *2 Std. *1 Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. Std. 88
Ball Valve Seat Materials Virgin PTFE Virgin PTFE is a good all-around, general purpose seating material. PTFE has outstanding resistance to chemical attack by a broad spectrum of organic chemicals, inorganic chemicals and solvents and is generally considered chemically inert. PTFE is a self-lubricating polymer with a very low coefficient of friction, which makes an excellent seating material for quarter-turn ball valves. Color Code Virgin PTFE resin has a natural pigment of WHITE. Temperature Range -20 to +400 F temperature range in ball valve applications. Typical Applications Cold and hot potable water, HVAC chilled and hot water. Evaporative cooling systems. Medical gas valves. NIBCO Figure Number Designation Y Pressure Range 27" vacuum to 600 PSI non-shock water, oil or gas. Unique Features Best choice for low pressure sealing, lowest torque of all PTFE polymers. Product Availability T/S-580/580-66 T/S-590/595-Y/66 T-560-BR-Y-20/66 T/S-FP-600 15% Reinforced PTFE NIBCO uses short strand fiberglass as a reinforcement for our mid-range ball valve products. Adding reinforcement increases the pressure containing capabilities of PTFE by reducing its tendency to cold-flow. Color Code 15% reinforced PTFE is color coded BLUE. This pigment is permanently molded into the PTFE polymer matrix. Temperature Range -20 to +400 F temperature range in ball valve applications. Pressure Range 27" vacuum to 1,000 PSI non-shock water, oil or gas. Unique Features Greater resistance to cold-flow than virgin PTFE. Typical Applications Mid-range steam applications. Throttling and balancing of hydronic heating and cooling systems. NIBCO Figure Number Designation R Product Availability T/S-580-70/70-66 T/S-585-70/70-66 F-510/530-CS-R/S6-R TC-580-CS-R T-560-BR-R-20/66 T-570-CS-R/S6-R T-580-CS-R/S6-R T/K-595-CS-R/S6-R TM/KM/BM-590/595-CS-R/S6-R 89
Ball Valve Seat Materials 25% Reinforced PTFE NIBCO uses short strand fiberglass as a reinforcement for our higher pressure carbon steel and alloy ball valve products. Adding reinforcement increases the pressure containing capabilities of PTFE by reducing its tendency to cold-flow. Color Code 25% reinforced PTFE resin has a color code of RED. This pigment is permanently molded into the PTFE resin matrix. Temperature Range -20 to +400 F temperature range in ball valve applications. Pressure Range 27" vacuum to 2,000 PSI non-shock water, oil or gas. Unique Features Improved dimensional stability. Good wear properties. Typical Applications Steam service, natural and bottled gas distribution. NIBCO Figure Number Designation R Product Availability T-560-CS-R/S6-R Carbon-Filled PTFE Carbon-filled PTFE is an excellent seat material for steam applications as well as high efficiency oil-based thermal fluids. Other fillers, including graphite, enable this seat material to have better cycle life than other filled or reinforced PTFE seats. Chemical resistance equal to other PTFE and filled PTFE products. Color Code Carbon filled PTFE has a natural pigment of BLACK. Temperature Range -20 to +500 F temperature range in ball valve applications. Pressure Range 27" vacuum to 2,000 PSI non-shock water, oil or gas. Unique Features Higher cycle life than other PTFE resins. Typical Applications High pressure steam and thermal fluids. NIBCO Figure Number Designation F (in flanged) and C (in threaded). Product Availability F-510/530-CS-F/S6-F-66 F-515/535-CS-F/S6-F-66 AT-585-70-66 TM-585-70-66 90
System Control Products Index Ball Valve Actuation and Control...92 Circuit Balancing Valves...93 Ball Valve Actuation Data Sheet...94 System Control Ball Valves... 95-96 Torque Charts... 97-98 Actuator Mounting Data... 99-102 Three-Way Bronze Full Port T/S-585-W3 Series....99 Two-Piece SS/CS Reduced Port T-580-S6/TC-580-CS-R...100 Three-Piece Bronze Reduced/Full Port T/S-590/595 Series...101 Three-Piece SS/CS Full Port TM/KM/BM-590/595 Series...102 For individual sizing of actuators to ball valves consult your NIBCO technical service representative. Torque: Torque is the effective rotary power required by a valve and/or delivered by an actuator. Torque is normally stated in inch/pounds or foot/pounds. This turning force in a ball valve is affected by three factors: 1. Friction of the ball to seat 2. Bearing friction (packing) 3. Dynamic forces (pressure) Torque = Distance x Force Breakaway Torque is the total of the three factors listed above. This value is normally the highest required torque to operate a valve and is used in sizing actuators. The torque values listed in the corresponding charts are valid for water and lubricating fluids at ambient temperature. For dry and non-lubricating fluids, consult your NIBCO technical service representative. Actuator mounting dimensions for flanged ball valves, see pages 72-75. 91
Ball Valve Actuation and Control Flexible, Reliable Actuation Engineered with a modular approach, NIBCO electric and pneumatic actuation systems give you the flexibility to actuate new valves or to retrofit existing valves with unprecedented ease. Both electric and pneumatic actuation systems feature an ISO standard mounting design, assuring long-term industry acceptance. Pneumatic Actuation Systems Ideally suited for most quarter-turn valves, NIBCO NDA and NSR pneumatic actuators offer exceptional starting and ending torque in a compact design. They consistently meet the demand for high torque, even in applications where the valve has been closed for an extended period. Engineered for a long, lubrication-free service life, NIBCO NDA and NSR actuators combine O-rings and PTFE seals to create a durable, low-friction seal. They are designed for either on-off duty, modulation or proportional control in industries ranging from chemical processing and pulp and paper, to petroleum refining, production industries, marine applications, and commercial construction applications. Pneumatic Accessories: Three and four way solenoids Switch box with limit switches and beacon Positioners for throttling service air or electric signal Speed controls Electric Actuation Systems For automated or computer-controlled flow control systems, NIBCO electric actuators offer exceptional convenience and flexibility. Ideal for applications where the valve is not readily accessible, these actuators provide a labor-saving alternative to manual flow control regulation. NIBCO electric actuators operate on the gear reduction motor principle, which allows opening and closing speeds ranging from two seconds to one minute or longer. With reversible motors that are rated for continuous duty, NIBCO electric actuators provide maximum torque output and longer life. They also feature thermal overload protection to safeguard the motor from extreme temperatures. Electric Actuator Accessories: Servo controls Extra SPDT switches Position transmitter Heater and thermostat Brake 92
Circuit Balancing Valves NIBCO Puts You In Control... With Circuit Balancing Valves New NIBCO Circuit Balancing Valves control and maintain a comfortable indoor climate while saving energy and reducing costs. These control valves ensure trouble-free operation and ease of maintenance. Why Balance Your System? Whether a system is designed for heating, cooling or water distribution, it must be properly adjusted and balanced for optimum design performance. An unbalanced system may produce temperature variations of up to 14 F between rooms, which can add up to 35% to energy costs. What are the Benefits? A balanced system ensures a comfortable indoor climate The correct flow in boilers and chillers The desired flow distribution throughout the building Energy savings and cost savings Trouble-free operation and ease of maintenance Lower capital cost Series 1710 DZR Brass Balancing Valves The 1710 series threaded and solder end range are T pattern globe style valves. Unique design features in the 1710 give improved flow measurement accuracy as well as a lower head loss characteristic compared to other valves. Memory stop feature provides repeatable regulation and control Valve position clearly visible in the hand-wheel display window Accurate across all valve positions Positive shut-off and isolation Dezincification resistant alloy ¹ ₂" through 2" size range Series 1709 DZR Brass (Mini) Balancing Valves Offered in ¹ ₂" and ³ ₄" solder end configuration only the 1709 series valve is an economical option for circuit balancing. Used in applications where standard size valves just won't fit. Globe style for greater control Integral test points Memory stop feature Dezincification resistant alloy Series 737A Iron Balancing Valves The 737A series flanged and grooved end range is from 2¹ ₂" through 12". Cast iron bodies and ductile iron bonnets are standard. Non-rising stem design Positive shut-off with EPDM elastomer disc Graphite stem sealing Linear scale with subdivision increments for accurate position indication Discrete memory stop Extended test points for easy access of balancing devices 93
Ball Valve Actuation Data Sheet To actuate all valves it is necessary to provide certain data to assure proper sizing and prevent damage to the system. Please supply as much data as possible. I. Valve Information: A. Type: Butterfly Ball B. Fig. No. Size Qty. C. Type of Fluid in Valve: Inlet Pressure: Is Fluid: Dry Wet Differential Pressure: System Velocity: System GPM: Temperature: II. Actuator Information: A. Electric: Voltage: Time for 90 rotation: Type Enclosure:_ NEMA 4 NEMA 7 Other Special Requirements: Brake Thermostat Heater and Thermostat Manual Override Extended Duty Motor Modulating Control Position Transmitter Extra SPDT Switches Potentiometer B. Pneumatic: Air supply to actuator: PSI (Min. 40 psi, Max. 120 psi) Actuator Type: Air-to-Air Air-to-Spring Failsafe: Open Closed Solenoid: NEMA 4 NEMA 7 Switch Box: If so: NEMA 4 NEMA 7 Type: SPDT DPDT (two each is standard) Pneumatic Positioner: 3-15 4-20 MA III. Special Notes: Note: If special features are required for actuators such as modulating positioners either for electric or pneumatic actuators, consult factory. 94
Bronze Ball Valves for System Controls Applications Two-Piece Body Full Port 316SS Trim Blowout-Proof Stem Pre-assembled with NIBCO Series 2000 Thermoplastic Housed Pneumatic Actuator 600 PSI/41.4 Bar Non-Shock Cold Working Pressure CONFORMS TO MSS sp-110, Actuator Mount per iso 5211 1. Stem Stainless Steel ASTM A 276 Type 316 2. O-Ring Fluoroelastomer 3. Thrust Washer Reinforced PTFE 4. Seat Ring (2) Carbon Filled PTFE 5. Ball (Vented) Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 6. Body Bronze ASTM B 584 Alloy C84400 7. Body End Piece Bronze ASTM B 584 Alloy C84400 8. Actuator Glass Reinforced Polyacrylamide TM-585-70-66-AP Size Pressure Figure Number Double Acting Mount Kit Figure Number Spring Return Mount Kit Actuator Actuator ¹ ₂" 100PSI TM-585-70-66-AP-NDA NDA2011F03 T117042 TM-585-70-60-AP-NSR NSR2011F03 3+3 T117042 ¹ ₂" 600PSI TM-585-70-66-AP-NDA NDA2011F03 T117042 TM-585-70-66-AP-NSR NSR2011F03 3+3 T117042 ³ ₄" 100PSI TM-585-70-66-AP-NDA NDA2011F03 T117042 TM-585-70-66-AP-NSR NSR2011F03 3+3 T117042 ³ ₄" 600PSI TM-585-70-66-AP-NDA NDA2011F03 T117042 TM-585-70-66-AP-NSR NSR2011F03 3+3 T117042 1" 100PSI TM-585-70-66-AP-NDA NDA2011F04 T117043 TM-585-70-66-AP-NSR NSR2011F04 3+3 T117043 1" 600PSI TM-585-70-66-AP-NDA NDA2011F04 T117043 TM-585-70-66-AP-NSR NSR2011F04 3+3 T117043 Note: 1. Spring Return Actuators are set for 80PSI Air Supply Standard 2. Spring Return Actuators are set for Fail to Close as Standard 3. Specify Size and Figure Number when Ordering 95
Bronze Ball Valves for System Controls Applications Two-Piece Body Reduced Port 316SS Trim Blowout-Proof Stem Reduced Orifice Ball for HVAC Control Applications 600 PSI/41.4 Bar Non-Shock Cold Working Pressure CONFORMS TO MSS sp-110, Actuator Mount per iso 5211 1. Stem Stainless Steel ASTM A 276 Type 316 2. O-Ring (2) Fluoroelastomer 3. Thrust Washer Reinforced PTFE 4. Seat Ring (2) Carbon Filled PTFE 5. Ball Stainless Steel ASTM A 276 Type 316 or ASTM A 351 Type CF8M 6. Body Bronze ASTM B 584 Alloy C84400 7. Body End Piece Bronze ASTM B 584 Alloy C84400 TM-585-CV Shown with 24 VDC Electric Actuator and Universal Mount Reduced Orifice Ball CV Ratings Size Figure # Material # CV ³ ₄" TM-585-CV-640 WL95H18 20 Standard Valve Size Figure # Material # CV ¹ ₂" TM-585-70-66 15.3 ³ ₄" TM-585-70-66 30.4 TM-585-CV Size Flange A B C D E F G H TM-585-70-66 Master In. mm. Size In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Lbs. Kg. Ctn. Qty. ¹ ₂ 15 F03.50 13 2.43 62 1.10 28.35 9 1.42 36.22 51.39 10.12 3.82.37 50 ³ ₄ 20 F03.75 19 2.94 75 1.37 35.35 9 1.42 36.22 51.39 10.12 3 1.23.56 25 96
Ball Valve Torque Charts Ball Valve Torque Requirements Operating Torque in Inch/Pounds Figure # Size 0-100 PSI 101-500 PSI 501-600 PSI T-560-BR-R/Y ¹ ₄" 35 65 65 One-Piece ³ ₈" 35 65 65 Bronze ¹ ₂" 35 65 65 Reduced Port ³ ₄" 70 100 100 1" 130 175 175 1¹ ₄" 175 230 230 1¹ ₂" 225 265 265 2" 370 510 510 580-70 ¹ ₄" N/A N/A N/A Two-Piece ³ ₈" N/A N/A N/A Bronze ¹ ₂" N/A N/A N/A Conventional ³ ₄" N/A N/A N/A Port 1" N/A N/A N/A 1¹ ₄" 120 185 185 1¹ ₂" 185 240 240 2" 220 300 300 2¹ ₂" 250 410 410 3" 370 540 540 585-70 ¹ ₄" 30 50 50 Two-Piece ³ ₈" 30 50 50 Bronze ¹ ₂" 30 50 50 Full Port ³ ₄" 55 75 75 1" 90 130 130 1¹ ₄" 120 185 185 1¹ ₂" 185 240 240 2" 220 300 300 2¹ ₂" N/A N/A N/A 3" N/A N/A N/A Figure # Size 0-100 PSI 101-500 PSI 501-600 PSI 585-70-W3 ¹ ₂" 42 42 N/A Three-Way ³ ₄" 67 67 N/A Bronze 1" 114 114 N/A Full Port 1¹ ₄" 159 159 N/A Maximum Rating 1¹ ₂" 218 218 N/A is 400 PSI CWP 2" 268 268 N/A TM-585-70-66 ¹ ₂" 25 30 Two-Piece ³ ₄" 30 40 w/pad 1" 30 50 Bronze 1¹ ₄" 55 70 Full Port 1¹ ₂" 55 110 2" 110 260 590-Y ¹ ₄" N/A N/A N/A Three-Piece ³ ₈" N/A N/A N/A Bronze ¹ ₂" N/A N/A N/A Conventional ³ ₄" N/A N/A N/A Port 1" N/A N/A N/A 1¹ ₄" 125 230 230 1¹ ₂" 150 275 275 2" 170 300 300 2¹ ₂" 250 410 410 3" 370 540 540 595-Y ¹ ₄" 45 65 65 Three-Piece ³ ₈" 45 65 65 Bronze ¹ ₂" 45 65 65 Full Port ³ ₄" 50 80 80 1" 125 230 230 1¹ ₄" 150 275 275 1¹ ₂" 170 300 300 2" 250 410 410 2¹ ₂" 370 540 540 3" N/A N/A N/A Figure # Size 0-100 PSI 101-500 PSI 501-600 PSI 601-1000 PSI 1001-1500 PSI 1501-2000 PSI T-560-CS/S6-R ¹ ₄" 40 70 75 80 85 100 One-Piece ³ ₈" 40 70 75 80 85 100 CS/SS ¹ ₂" 40 70 80 85 90 110 Reduced Port ³ ₄" 75 100 105 110 125 140 1" 135 190 200 215 245 275 1¹ ₄" 180 240 250 270 290 330 1¹ ₂" 225 300 310 330 365 410 2" 370 460 490 580 685 790 T-570-CS-R ¹ ₂" 40 65 70 80 90 105 One-Piece ³ ₄" 70 95 100 105 120 135 Bar Stock 1" 125 180 190 205 240 270 CS 1¹ ₄" 170 230 240 260 285 320 Reduced Port 1¹ ₂" 210 285 295 320 355 395 2" 350 440 470 560 665 770 T-580-CS-R ¹ ₄" 40 40 50 55 65 80 Two-Piece ³ ₈" 40 40 50 55 65 80 CS ¹ ₂" 75 75 85 95 105 125 Conventional ³ ₄" 100 100 110 120 130 150 Port 1" 120 130 140 150 170 215 1¹ ₄" 165 175 185 200 250 300 1¹ ₂" 200 200 220 250 300 350 2" 290 300 320 350 400 450 97
Ball Valve Torque Charts Ball Valve Torque Requirements Operating Torque in Inch/Pounds Figure # Size 0-100 PSI 101-500 PSI 501-600 PSI 601-1000 PSI 1001-1500 PSI 1501-2000 PSI T-580-S6-R ¹ ₄" 65 70 75 90 105 125 TC-580-CS-R ³ ₈" 65 70 75 90 105 125 Two-Piece ¹ ₂" 65 75 80 95 110 130 CS/SS ³ ₄" 85 100 105 115 130 150 Conventional 1" 100 125 135 150 180 215 Port 1¹ ₄" 135 160 170 195 250 300 1¹ ₂" 175 200 210 250 300 350 2" 245 290 305 335 390 450 TM/KM- ¹ ₄" 65 70 75 80 595-CS/S6-R ³ ₈" 65 70 75 80 T/K-595-CS/S6-R ¹ ₂" 75 80 85 100 Three-Piece ³ ₄" 130 150 165 180 CS/SS 1" 150 220 230 250 Full Port 1¹ ₄" 250 290 300 325 1¹ ₂" 310 350 365 400 2" 390 480 495 550 TM/KM/BM- ¹ ₂" 50 50 55 60 75 90 590-CS/S6-R ³ ₄" 85 90 95 100 120 150 Three-Piece 1" 130 140 145 150 170 200 CS/SS 1¹ ₄" 175 180 190 210 230 280 Conventional 1¹ ₂" 275 300 310 325 360 400 Port 2" 325 350 360 385 440 500 Figure # Size 0-100 PSI 101-285 PSI F-510 ¹ ₂" 84 98 ANSI Class 150 ³ ₄" 120 144 CS/SS 1" 156 180 Uni-Body 1¹ ₂" 216 240 Flanged 2" 240 336 3" 480 840 4" 720 1260 6" 2220 3540 8" 5520 8400 10" 9600 15000 12" 12000 19500 F-515 ¹ ₂" 108 126 ANSI Class 150 ³ ₄" 153 184 CS/SS 1" 186 214 Split-Body 1¹ ₂" 279 311 Flanged 2" 343 480 3" 735 1150 4" 1042 2176 6" 3182 5303 8" 7557 14375 10" 13810 19729 12" 18859 52804 Figure # Size 0-100 PSI 101-285 PSI 286-740 PSI F-530 ¹ ₂" 84 98 144 ANSI Class 300 ³ ₄" 120 144 216 CS/SS 1" 156 180 252 Uni-Body 1¹ ₂" 216 240 456 Flanged 2" 240 336 684 3" 480 840 3300 4" 720 1260 4860 6" 2220 3540 11520 8" 5520 8400 24600 10" 9600 15000 37200 12" 12000 19500 N/A F-535 ¹ ₂" 108 126 185 ANSI Class 300 ³ ₄" 153 184 276 CS/SS 1" 186 214 300 Split-Body 1¹ ₂" 279 311 590 Flanged 2" 343 480 938 3" 735 1151 4219 4" 1042 2176 6221 6" 3182 5303 15273 8" 7557 14375 33678 10" 13810 19729 48927 12" 18859 52804 56000 Figure # Size 0-100 PSI 101-285 PSI 286-740 PSI 741-1500 PSI F-565 1" x 1" 180 500 ANSI Class 600 1¹ ₂" x 1¹ ₂" 250 700 CS/SS 2" x 2" 350 1100 Split-Body 3" x 3" 425 2100 Flanged 4" x 4" 500 3500 Notes: 1. Torque values apply to clean fluid at ambient temperatures. 2. Other applications may affect above listed values. 3. Consult factory for torque values for seat materials other than those listed. 4. Handles are not recommended for valves larger than 6". Gear operators or other actuators are recommended. 5. This chart is to be used as a guide only. Some variation is possible based on application. 98
Three-Way Bronze Ball Valves Data for Actuation NIBCO No. T-585-W3 Series T-585-W3 3-Way Ball Valve Size A B C +.0 D -.003 +0 F -.002 ±.030 H Flat Length In. mm. In. mm. In. mm. In. mm. Tap Thru In. mm. In. mm. In. mm. In. mm. ¹ ₂ 15 1.38 35.69 17.88 22 #10-24.31 8.22 6.81 21.30 8 ³ ₄ 20 1.38 35.69 17.88 22 #10-24.38 10.25 6.95 24.38 10 1 25 1.38 35.69 17.88 22 #10-24.38 10.25 6.93 24.36 9 1 ¹ ₄ 32 1.50 38.75 19.94 24.250-20.56 14.38 10 1.37 35.50 13 1 ¹ ₂ 40 1.50 38.75 19.94 24.250-20.56 14.38 10 1.36 35.50 13 2 50 1.50 38.75 19.94 24.250-20.56 14.38 10 1.26 32.57 14 Actuator mounting data for two-piece bronze ball valves with mounting pads TM-585 series page 23 and AT-580 series page 25. 99
Two-Piece SS/CS Ball Valves Data for Actuation NIBCO No. T-580-S6-R and TC-580-CS-R Series T-580-S6-R and TC-580-CS-R Flat +.02 +.02 + 0/-.012 +0/-.012 +0/-.012 Lb/In Size A B C D E F G H Flats Length Stem Ø Boss Ø Torque In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Thr d 0 PSI ¹ ₂ 15 1.13 29.56 14.50 13.55 14.55 14.94 24.50 24.25 6.20 5.39 10.31 8.71 18 10-24 69 ³ ₄ 20 1.38 35.69 17.87 22.67 17.67 17 1.31 33.67 17.31 8.28 7.60 15.44 11.94 24 10-24 122 1 25 1.38 35.69 17.87 22.67 17.67 17 1.30 33.67 17.31 8.28 7.60 15.44 11.94 24 10-24 148 1 ¹ ₄ 32 1.50 38.75 19.93 24.79 20.79 20 1.41 36.79 20.31 8.35 9.63 16.56 14 1.10 28 25-20 252 1 ¹ ₂ 40 1.50 38.75 19.93 24.79 20.79 20 1.38 35.79 20.31 8.35 9.63 16.56 14 1.10 28 25-20 304 2 50 1.50 38.75 19.93 24.79 20.79 20 1.41 36.79 20.31 8.35 9.63 16.56 14 1.10 28 25-20 321 100
Three-Piece Bronze Ball Valves Data for Actuation NIBCO No. T/S-590 and TS-595 Series T/S-590 Series +0 ± 03 +.03 -.002 Size A B C D E F Bolt Octagon Ø BC In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Dia. In. mm. In. mm. 1 ¹ ₄ 32.25 6.38 10 1.09 28.38 10 2.32 59 2.00 51 5/16-18 2.00 51 2.56 65 1 ¹ ₂ 38.38 10.56 14 1.59 40.50 13 2.63 67 2.62 66 5/16-18 2.25 57 2.89 73 2 50.38 10.56 14 1.62 41.50 13 3.12 79 2.81 71 5/16-18 2.75 70 3.37 86 2 ¹ ₂ 63.38 10.56 14 1.56 40.56 14 3.88 99 3.12 79 3/8-16 3.50 89 4.39 112 3 76.44 11.75 19 2.09 53.81 20 4.72 120 4.03 105 7/16-14 4.12 105 5.47 139 T/S-595 Series +0 ± 03 +.03 Size A -.002 B C D E F Bolt Octagon Ø BC In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. Dia. In. mm. In. mm. ¹ ₂ 13.22 5.31 8.84 21.30 8 1.38 35 1.47 37 1/4-20 1.06 24 1.79 45 ³ ₄ 19.25 6.38 10 1.09 28.38 10 1.87 47 1.81 46 1/4-20 1.25 32 2.05 52 1 25.25 6.38 10 1.09 28.38 10 2.32 59 2.00 51 5/16-18 1.62 41 2.56 65 1¼ 32.38 10.56 14 1.59 40.50 13 2.62 67 2.62 66 5/16-18 2.00 51 2.89 73 1½ 38.38 10.56 14 1.62 41.50 13 3.12 79 2.81 71 5/16-18 2.25 70 3.37 86 2 50.38 10.56 14 1.56 40.56 14 3.88 99 3.12 79 3/8-16 2.75 70 4.39 112 2½ 63.44 11.75 19 2.09 53.81 20 4.72 120 4.03 105 7/16-14 3.50 89 5.47 139 101
Three-Piece CS/SS Ball Valves Data for Actuation NIBCO No. TM/KM/BM-590 and TM/KM-595 Series TM/KM/BM-590 Series Size J M N E H BC In. mm. In. mm. In. mm. In. mm. In. mm. Thr'd In. mm. ¹ ₂.20 50.41 10.51 13 1.20 30 M5 1.42 36 ³ ₄.20 5.41 10.51 13 1.36 35 M5 1.42 36 1.28 7.60 15.75 19 1.59 40 M5 1.65 42 1 ¹ ₄ 32.32 8.63 16.87 22 1.81 46 M5 1.65 42 1 ¹ ₂ 40.39 10.69 18.97 25 1.95 50 M6 1.96 50 2 50.39 10.69 18.97 25 2.17 55 M6 1.97 50 ±.001 ±.015 ±.025 TM/KM-595 Series Size J M N E H BC In. mm. In. mm. In. mm. In. mm. In. mm. Thr'd In. mm. ¹ ₄ 8.20 5.41 10.60 15 1.15 29 M5 1.42 36 ³ ₈ 10.20 5.41 10.60 15 1.15 29 M5 1.42 36 ¹ ₂ 15.20 5.41 10.60 15 1.15 29 M5 1.42 36 ³ ₄ 20.28 7.60 15.85 22 1.34 34 M5 1.42 36 1 25.28 7.60 15.91 23 1.58 40 M5 1.65 42 1 ¹ ₄ 32.352 9.64 16.87 22 1.82 46 M6 1.97 50 1 ¹ ₂ 40.35 9.64 16.89 22 2.07 53 M6 1.97 50 2 50.35 9.64 16.92 23 2.40 61 M6 1.97 50 102
Engineering Data Index s...104 Temperature Limits of Material...105 Flow Data... 106-107 Properties of Valve Materials... 108-111 Bronze, Brass, Copper and Iron... 108-109 Steel, Stainless Steel and Alloys... 110-111 Valve Installation Tips...112 Figure Number Comparison...113 Valve Warranty...114 103
s NIBCO ball valves are designed and manufactured to give maximum performance on recommended service at the lowest possible initial and upkeep cost. They meet or exceed the following specifications developed through years of experience, research and many laboratory tests. Ball Valves MSS SP-110 Ball valves threaded, socket-welding, solder joint, grooved and flared ends. FED SPEC WW-V-35C, Ball valves threaded, socket-welding, solder joint, grooved and flared ends were Type II, Cass C, D, discontinued in 1998. (for reference only) Style 1 and 3 MSS SP-25 API 598 API 607 API 608 MSS SP-72 ASME/ANSI B16.34 ASME/ANSI B16.5 Standard marking system for valves. Valve inspection and testing. Fire test for soft seated quarter-turn valves. Metal ball valves flanged, threaded and welding ends. Ball valves with flanged and butt welding ends for general service. Valves, flanged, threaded and welding ends. Steel pipe flanges, flanged valves and fittings. The above list of specifications covers a variety of NIBCO ball valves but does not mean that every NIBCO ball valve meets every specification. For special applications, contact your NIBCO representative. 104
Temperature Limits of Materials Rated Internal Working Pressures of Joints made with Copper Water Tube and Solder Type Fittings, PSI (Bar) Copper Water Tube K, L and M Nominal Sizes, In Inches (mm) Water A Saturated Solder or Brazing Service Temperature Steam LB (kg) Alloy Used in Joints F ( C) ¹ ₄" to 1" 1¹ ₄" to 2" 2¹ ₂" to 4" 5" to 8" 10" to 12" All Sizes 50-50 Tin-Lead B, G 100 (38) 200 (14) 175 (12) 150 (10) 135 (9) 100 (7) 15 D (6.8) D 150 (66) 150 (19) 125 (8) 100 (7) 90 (6) 70 (4) 200 (93) 100 (9) 90 (6) 75 (5) 70 (40) 50 (3) 250 (121) 85 (6) 75 (5) 50 (3) 45 (3) 40 (2) 95-5 Tin-Antimony C 100 (38) 635 (43) 560 (39) 375 (26) 340 (23) 150 (10) 15 D (6.8) D 150 (66) 635 (43) 560 (39) 375 (26) 340 (23) 150 (10) 200 (93) 630 (43) 480 (33) 375 (26) 340 (23) 140 (10) 250 (121) 435 (30) 330 (23) 265 (18) 245 (16) 110 (7) Brazing Alloys, 100-150-200 (32-66-93) H H H H H 120 E (54.4) E Melting at or above 250 F (121) F H H H H H 1000 F (538 C) 350 (177) H H H H H The values in the above table are based on data in the National Bureau of Standards publications, Building Materials and Structures Reports BMS 58 and BMS 83. A Including other non-corrosive liquids and gases. B ASTM B 32, Alloy Grade Sn50. C ASTM B 32, Alloy Grade Sb5. D This pressure is determined by the temperature of saturated steam at 15 Ib. (6.8 kg) pressure at 250 F (121 C). E This pressure is determined by the temperature of saturated steam at 120 Ib. (54.4 kg) pressure at 350 F (177 C). Pressure/Temperature Ratings for Bronze Pressure Rated Valves Temperature Pressure PSI Press. Class 125 2,3 150 3 200 3 300 3 End Conn. Thd. Thd. Thd. Thd. F C ASTM B 62 ASTM B 61-20 to 150-28.8 to 65.5 200 300 400 600 200 93.3 185 270 375 560 250 121.1 170 240 350 525 300 148.8 155 210 325 490 350 176.6 140 180 300 450 400 204.4 275 410 406 207.7 125 150 450 232.2 120 1 145 1 250 375 500 260.0 225 340 550 287.7 200 300 1 Some codes (i.e. ASME BPVC, SECTION 1) limit the rating temperatures of the indicated material to 406 F temperatures. 2 Buna-N disc valves limited to 180 F temperatures. 3 PTFE disc valves limited to 450 F temperatures. 4 Solder end valves are limited by temperatures which affect the strength of the solder joint. Tables from MSS SP-80 F For service temperatures lower than 250 F (121 C), the solders as above may be used. G The Safe Drinking Water Act Amendment of 1986 prohibits the use in potable water systems of any solder having a lead content in excess of 0.2%. H Rated internal pressure is that of the tube being joined. While solders can be used, brazing alloys are recommended. Pressure/Temperature Ratings for NIBCO Gray Iron and Ductile Iron Valves Gray Iron Ductile Iron 1 Temperature Class 125 Class 250 200 WOG 500 WOG Class 150 F C 2"-12" 14"-24" 30"-48" 2"-12" 14"-24" 2"-12" -20 to 100-28.8 to 37.7 200 150 150 500 300 285 150 65.5 200 150 500 300 243 200 93.3 190 135 115 460 280 235 225 107.2 180 130 100 440 270 250 121.1 175 125 85 415 260 225 275 135.0 170 120 65 395 250 300 148.8 165 110 50 375 240 215 325 162.7 155 105 355 230 350 176.6 150 100 335 220 210 375 190.5 145 315 210 400 204.4 140 290 200 200 425 218.3 130 270 *450 232.2 125 250 185 500 260.0 170 550 287.7 155 600 315.5 140 650 343.3 125 The temperature shown for the corresponding rating shall be the metal temperature of the pressure retaining parts. It shall be assumed that the metal temperature will be the temperature of the contained fluid. Use of a pressure rating at a metal temperature other than that of the contained fluid shall be the responsibility of the user. 1 Buna-N Disc Valves limited to 180 F or EPDM Disc Valves limited to 250 F. * Maximum temperature for bronze trim or PTFE 105
Flow Data C v Values for Valves Valve Size Size (mm.) 4 8 10 15 20 25 32 40 50 65 80 90 100 125 150 Size (In.) ¹ ₈ ¹ ₄ ³ ₈ ¹ ₂ ³ ₄ 1 1¹ ₄ 1¹ ₂ 2 2¹ ₂ 3 3¹ ₂ 4 5 6 GATES S/T-29.5 2 4.9 9.1 22 40 65 95 175 S/T-111, 113, 131, 133 134, 136, 154, 174, 176 5.6 10.7 17.6 32 54 97 135 230 337 536 710 960 1,525 2,250 T/F-617, 619, 667, 669, 607, 609 F-637, 639 215 335 510 710 945 1,525 2,250 GLOBES S/T-211, 235, 256 275-Y.61 1.16 2.2 3.64 6.65 11.1 20 28 48 70 111 198 T-275-B 1.16 2.21 3.64 6.65 11.1 20 28 48 70 111 F-718, F-738 45 70 105 195 315 465 CHECKS S/T-413, 433, 473 (Swing) 1.3 2.5 4.8 14.3 24 43 60 102 150 238 315 435 675 1,000 S/T-480 (Poppet) 3.70 6.86 16.3 30 49 72 130 F-908 (Swing) 243 356 665 1,073 1,584 T/F-918, 968, 938 (Swing) 137 221 327 605 975 1,440 KW-900-W 60 105 184 354 577 801 F-910, 960 (Poppet) 110 155 278 431 625 W-910, 960 (Poppet) 66 88 130 228 350 520 G-920-W 77 129 209 358 573 898 W-920-W 71 108 178 330 560 840 Ball F-510, 530 11 25 45 137 217 482 790 1,144 F-515, 535 25 50 85 259 440 840 1,400 2,350 5,200 F-565 75 235 400 1,180 2,040 T-560-BR/CS/S6 4.0 4.0 5 12 22 35 52 95 T-570 7 12 25 38 52 95 T/S-580 5.8 13.9 27 44 64 100 T/S-580-70 38.5 76 101.4 183 390 T/S-585-70 4.2 6.2 15.3 30.4 48.8 103 143 245 TM-585-70-66 15.3 30.4 48.8 103 143 245 AT-585-70-66 183 T-580-70-W3 21.6 38 48.5 T/S-585-70-W3 6 12 19.5 T-580 (CS-S6) 6 12 15 23 36 44 64 114 T/S-590-Y 44 64 100 183 390 T/S-595-Y 5.9 11.4 18.7 34 57 103 143 245 310 TM/KM-595 (CS-S6) 6 12 19 37 64 103 143 245 T/K-595 (CS-S6) 6 12 19 37 64 103 143 245 Butterfly LD/WD-1000, 2000, 3000 166 247 340 660 1,080 1,613 GD-4765, 4775 FC-2700, FD-5700 145 195 290 600 930 1,600 NOTE: Flow data for angle valves use globe Cv times 1.25: Bronze Angles 311, 335, 375, 376-AP Iron Angles 818, 869, 831 106
(Throttling Factors) For throttling use with disc partially open. Multiply Cv by factor. NOTE: Gate valves are not throttled. 200 250 300 350 400 450 500 600 750 900 8 10 12 14 16 18 20 24 30 36 0 10 20 30 40 50 60 70 80 90 100 4,150 6,700 9,925 13,800 18,375 23,600 29,600 43,570 0.35.65.90.93.96.98.99 1.00 1.00 1.00 0.03.035.06.1.16.24.32.47.68 1.00 860 1,390 0.35.65.90.93.96.98.99 1.00 1.00 1.00 WARNING 2,937 4,730 6,985 2,670 4,300 6,350 1,500 2,357 3,742 1,115 1,770 2,500 3,400 4,400 5,600 6,900 10,000 15,400 22,400 900 1,450 1,740 3,180 5,270 1,600 2,700 4,000 2,164 3,507 5,516 10,200 14,400 25,300 3,759 5,300 7,969 11,917 16,383 21,705 27,908 43,116 60,922 86,375 3,450 5,800 8,950 The Fluid Flow factors contained herein are calculated values. They are, therefore, approximations and cannot be used for highly critical flow or pressure drop calculations. For very precise flow measurements, tests must be conducted on any valve mentioned within this catalog. Throttling of ball valves is not recommended when valves are less than 45 open. 0 10 20 30 40 45 50 60 70 80 90 0.01.05.16.30.37.45.58.71.87 1.00 0.01.05.16.30.37.45.58.71.87 1.00 0.01.05.16.30.37.45.58.71.87 1.00 0.01.05.16.30.37.45.58.71.87 1.00 0.01.05.16.30.37.45.58.71.87 1.00 0.01.05.16.30.37.45.58.71.87 1.00 0.01.05.16.30.37.45.58.71.87 1.00 0.01.05.16.30.37.45.58.71.87 1.00 0.01.05.16.30.37.45.58.71.87 1.00 0.01.05.16.30.37.45.58.71.87 1.00 0.01.05.16.30.37.45.58.71.87 1.00 0.01.05.16.30.37.45.58.71.87 1.00 0.01.05.16.30.37.45.58.71.87 1.00 0.01.05.16.30.37.45.58.71.87 1.00 0.01.05.16.30.37.45.58.71.87 1.00 0.01.05.16.30.37.45.58.71.87 1.00 0.01.05.16.30.37.45.58.71.87 1.00 0.03.06.12.18.22.27.40.56.80 1.00 107
Properties of Valve Materials Alum. Iron Copper Bronze Brass Type OTHER MANGA- MOLYB- ASTM ALLOY CARBON CHROME COBALT COPPER IRON LEAD NESE DENUM ALLOY NO. DESIGNATION AL C Cr Co Cu Fe Pb Mn Mo Brass Wire (Red Brass) B 134 UNS C23000 85.0.05.05 Leaded Red Brass B 140 UNS C31400 89.0.10 1.9 Free Cutting Brass B 16 UNS C36000 61.5 3.0 Forging Brass B 124 UNS C37700 60.0.3 2.0 Forging Brass B 283 UNS C37700 58.0.3 2.5 Leaded Brass (Semi-Red Brass) B 584 UNS C84400.005 81.0.40 7.0 Leaded Brass (Red Brass) B 584 UNS C84500.005 78.0.40 7.0 Aluminum Bronze (Rod) B 150 UNS C64200 7.0 91.0.30.05.10 Copper-Silicon Alloy (Alloy B) B 98/B 99 UNS C65100 96.0.8.05.7 Copper-Silicon Alloy UNS C69300 75.0 (Rod Lead-Free - DZR) Copper-Silicon Alloy B 371 UNS C69400 81.5.20.30 Composition Bronze B 62 UNS C83600.005 85.0.30 5.0 (Ounce Metal) Copper-Silicon Alloy B 584 UNS 87600 89.0 Copper-Silicon Alloy B 584 UNS 87850 76.0 (Cast Lead-Free - DZR) Navy "M" B 61 UNS C92200.005 88.0.25 1.5 (Steam Bronze) Aluminum Bronze B 148 UNS C95400 11.0 85.0 4.0 (Cast) Nickel Bronze B 584 UNS C97600 64.0 4.0 (Leaded) Copper B 75 UNS C12200 99.9 (Wrot) Gray Iron A 126 Class B 3% Ni Gray Iron A 126 Class B (Modified) Nominal or MaxIMUM Chemical Composition Austenitic Gray Iron A 436 Type 2 3.00 2.0.5 1.0 (Ni-Resist) Ductile Iron (DI) A 395 3.20 2.0.5 (Ferritic) Austenitic Ductile Iron (Ductile) A 536 65-45-12 (Ductile) A 536 80-55-06 (Ni-Resist) A 439 D2C 2.9.5 2.4 1.0 Commercial Aluminum SC 84 A UNS 87.0 1.0 1.3.35 380 modified A38000 108
Nominal or maximum chemical composition Nominal physical properties Titan- Tung- Tensile yield NICKEL phos silicon sulfur tin ium sten zinc strength STRENGTH % Ni p Si s Sn Ti W Zn Psi Psi Elongation Hardness 15.0 56,000 60 HRB.7 9.1 50,000 30,000 7 60 hrb 35.5 50,000 20,000 15 75 HRB 38.0 52,000 20,000 45 80 HRB 38.0 52,000 20,000 45 78 HRB.02.005.08 3.0 9.0 29,000 13,000 18 55 HB 1.0.02.005.08 3.0 12.0 29,000 13,000 16 55 HRB * 500 kg.25 2.0.20.50 90,000 45,000 9 80 hrb 1.6 1.5 86,000** 20,000 11 65 HRB.10 3.0 21.9 80,000 48,000 5 80 HRB 4.0 14.5 80,000 40,000 15 80 HRB 1.0.05.005.08 5.0 5.0 30,000 14,000 20 60 HB * 500 kg 4.5 5.5 66,000 32,000 20 110 HB.12 3.0 20.9 68,000 22,000 16 70 HRB 1.0.05.005.05 6.0 4.5 34,000 16,000 22 65 hrb * 500 kg 75,000 30,000 12 170 hb * 3000 kg 20.0 4.0 8.0 40,000 17,000 10 80 hb.02 36,000 30,000 25 45 t.75.15 31,000 195 hb 3.00.75.15 31,000 195 hb 20.0 2.0.12 25,000 118 hb.08 2.50 60,000 40,000 18 167 hb 65,000 45,000 12 160 HB 80,000 55,000 6 160 hb 24.0.08 3.0 58,000 28,000 20 146 hb.5 12.0.15.50 42,000 19,000 3.5 *Load Applied During Testing **Allowable Range is 75,000 to 95,000 109
Properties of Valve Materials Monel H.F. Trim Steels Steels Stainless Steel OTHER MANGA- MOLYB- ASTM ALLOY CARBON CHROME COBALT COPPER IRON LEAD NESE DENUM ALLOY NO. DESIGNATION AL C Cr Co Cu Fe Pb Mn Mo Wrot 304 A 167 304 UNS S30400.08 19 2 Cast 316 A 351 CF8M UNS S31600.08 20 1.5 2.5 Cast 316 A 743 CF16F.16 20 1.5 1.5 Cast 316 A 743 CF8M.08 20 1.5 2.5 Wrot 316 A 276 316 UNS S31600.08 17 2 Cast 410 A 217 CA 15.15 13 1 2.5 Forged 410 A 182 F6A2.15 13 1 Wrot 410 A 276 410 UNS S41000.15 13 1 Wrot 416 A 582 UNS S41600.15 13 1.25 Wrot 420 A 276 420 UNS S42000.15 13 1 Cast Alloy 20 A 743 CN7M.07 20 3.5 1.5 2.5 Wrot Alloy 20 B 473 20C63 UNS N08020.07 20 3.5 2 2.5 Wrot 17-4PH A 564 630 UNS S17400.07 16 3.5 1 Forged Carbon Steel A 105.35 1 Cast Carbon Steel A 216 WCB.3 1.1 Cast Carbon Steel A 216 WCC.25 1.2 1¹ ₄ Cast Cr. Moly Steel A 217 WC6.2 1.2.7.55 Cast Cr. Moly Steel A 217 C5.2 5.55.55 Cast Low Carbon Steel A 352 LCB.3 1.0 Nickel-Low Carbon Steel A 352 LC2.25.65 B-7 Alloy Steel Studs A 193 B7.4 1.85.2 304 SS Nuts A 194 GR8.08 19 2 2-H Alloy Steel Nuts A 194 2H.4 Reg. Steel Bolting A 307 Gr. B.2.45 Steel Bolting A 449.4.6 304SS Bolting A 493 304 UNS S30400.08 19 2 Eyebolts A 489.48 1.0 Gland Nuts A 563 Gr. A.37.55.35 1.0 H/W Nuts A 108 1020 UNS G10200.20.45 Swing Bolt Pin A 108 1212 UNS G12120.13.85 Yoke Bushing Caps A108 12L14.15.25 1.0 Seat Ring Base A 519 1026.25.75 (Trademark Materials like, AWS 5.13 1.25 29 55 2.5 Stellite 6*, Stoody 6, and Wallex 6) Cast Monel QQ-N-288-E.5.3 30 3.5 1.5 Wrought Monel (K-500) QQ-N-286-C1B 3.0.1 24 2.0 1.5 *Trademark by Cabot Corp. Nominal or Maximum Chemical Composition 110
Nominal or maximum chemical composition Titan- Tung- Tensile yield NICKEL phos silicon sulfur tin ium sten zinc strength STRENGTH % ni p si s Sn Ti W Zn Psi Psi Elongation Hardness 9.045 1.0.03 75,000 30,000 40 202 HB 11.04 2.0.04 70,000 30,000 25 11.04 2.0.04 70,000 30,000 30 12.045 1.0.03 75,000 30,000 30 12.045 1.0.03 75,000 30,000 30 1.04 1.5.04 90,000 65,000 18.04 1.0.03 85,000 55,000 18 200/225 HB.5.04 1.0.03 100,000 80,000 15.06 1.0.15 114,000 95,000 17 235 HB.04 1.0.03 250/450 HB 28.04 1.5.04 62,000 25,000 35 35.045 1.0.035 85,000 35,000 30 4.04 1.0.03 115,000 75,000 18 255 HB.04.035.05 70,000 36,000 22 187 HB.04.6.045 70,000 36,000 22.04.6.04 70,000 40,000 22.04.06.045.04.75.045 Nominal physical properties.04.6.045 65,000 35,000 24 2.5.04.6.045 70,000 40,000 24.035.25.04 125,000 105,000 16 9.045 1.0.03 126/300 HB.04.05 250/300 HB.04.05 100,000 18 121/212 HB.04.05 120,000 92,000 14 9.045 1.0.03 90,000.04.25.05 75,000 30,000 30.35.04.2.05.04.05 120/300 HB.10.20.07.3.04.05 55,000 35,000 25 3 5 105,000 10 350 HB 60 1.5 65,000 32,500 25 125/150 HB 67.5.01.5 135,000 95,000 20 255 HB 111
Valve Installation Tips SOLDERING AND SILVER BRAZING Analyze the application to determine which valve is best suited for installations, keeping in mind the service for which the valve is recommended. Before installing the correct valve, review the installation instructions to prevent damage to the valve and to assure its maximum efficiency. 1. Cut tube end square. Ream, burr and size. 2. Use sand cloth or steel wire brush to clean both ends to a bright metal finish. Steel wool is not recommended. 3. Apply flux to outside of tube and inside of solder cup. Surfaces to be joined must be completely covered. Use flux sparingly. 4. Ball valves should be in the closed position and gate valves open. Apply heat to tube first. Transfer as much heat as possible through tube into valve. Avoid prolonged heating of valve itself. 4a. Silver Brazing Method: Assemble parts to be brazed. If fluxed parts are allowed to stand, the water in the flux will evaporate, and dried flux is liable to flake off, exposing metal surfaces to oxidation. Assemble joint by inserting tube into socket hard against the stop. The assembly should be firmly supported so that it will remain in alignment during the brazing operation. NOTE: On one-inch and larger valves, it is difficult to bring the whole joint up to temperature at one time. It will frequently be found desirable to use a double-tip torch to maintain the proper temperature over the larger area. A mild pre-heating of the whole socket area is recommended. Apply heat to parts to be joined. The preferred method is by oxy-acetylene flame. Heat tube first, beginning one inch from edge of valve. Sweep flame around tube in short strokes up and down at right angles to run of tube. To avoid burning through tube, the flame should be in continuous motion and not allowed to remain on any one point. Apply flame to valve at base of socket. Heat uniformly, sweeping flame from valve to tube until flux on valve becomes quiet. Avoid excessive heating of valve. When flux appears liquid and transparent on both tube and valve, start sweeping flame back and forth along axis of joint to maintain heat on parts to be joined, especially toward base of valve socket. 5. Use just enough solder: with wire solder, use 3/4" for a 3/4" valve, etc. If too much solder is used, it may flow past tube stop and clog sealing area. When joint is filled, a continuous run of solder or brazing alloy will be visible. 5a. Silver Brazing Method: Apply brazing wire or rod at point where tube enters valve socket. Keep flame away from rod or wire as it is fed into the joint. Move flame back and forth as alloy is drawn into joint. When the proper temperature is reached alloy will flow readily into space between tube outer wall and valve socket. When joint is filled, a continuous rim of brazing alloy will be visible. 6. Remove excess solder with small brush while plastic, leaving a fillet around end of valve as it cools. SILVER BRAZING The strength of a brazed joint does not vary appreciably with the different brazing materials, but depends to a large extent upon the maintenance of proper clearance between the outside of the tube and the valve socket. The interior dimensions of silver brazing valve sockets are machined to the closest tolerances and finished smooth to promote full capillary attraction. NOTE: Care should be observed in cleaning and in removing residues of the cleaning medium. Attempting to braze a contaminated or improperly cleaned surface will result in an unsatisfactory joint. Silver brazing alloys will not flow over or bond to oxides. Oily or greasy surfaces repel fluxes, leaving bare spots which oxidize and result in voids and inclusions. THREADING Grit, dirt or any foreign matter accumulated in the pipe can hinder efficient valve operation and seriously damage vital valve parts. Thoroughly clean pipe internally with air or steam. When threading pipe, gauge pipe threads for size and length to avoid jamming pipe against seat and disc. Thoroughly clean threaded end to remove any harmful steel or iron deposits. For a good joint, use PTFE tape or pipe dope. If pipe dope is used, apply sparingly on pipe threads, never on valve threads. Do not allow any pipe dope into valve body in order to avoid damage to disc and seat. Before installation, check line of flow through valve so that valve will function properly. Close valve completely before installation. Apply wrench to hex next to pipe and guard against possible distortion. After installation of valve, support line; a sagging pipe line can distort valve and cause failure. FLANGED There are several steps to follow to make sure that a flanged joint will be properly assembled. First, clean the joint carefully. Then loosely assemble the joint by putting in the bottom two or three bolts. Then carefully insert the gasket into place. The bottom bolts will help locate the gasket and hold it in position. Then insert the rest of the bolts into place and tighten all of the bolts evenly not in rotation, but by the cross-over method to load the bolts evenly and eliminate concentrated stresses. The bolts should be checked for tightness after an appropriate interval of use and retightened if necessary. 112
Figure Number Comparisons Threaded/Solder/Weld End Ball Valves NIBCO Milwaukee Apollo (Conbraco) Watts Jamesbury Worcester One-Pc. Bronze 560-BR 9A-100 B6100 Two-Pc. Bronze Conventional Port 580-70 BA100/150 70-100/200 B6000/6001 A11-TT 4811R Two-Pc. Bronze Full Port 585-70 77-100/200 B6080/6081 Two-Pc. Brass Full Port FP-600 BA475/485 64-100 FBV(S)-3 Three-Pc. Bronze Conventional Port 590-Y 411T Three-Pc. Bronze Full Port 595-Y BA300/350 82-100/200 B6800/6801 5911T One-Pc. Carbon Steel Cast 560-CS 92-100 C-7100 33-2200-ML One-Pc. Carbon Steel Bar Stock 570-CS 93-100 5844R Two-Pc. Carbon Steel 580-CS 20 CS OR 73-100 C-7000 A22MT 4844R Three-Pc. Carbon Steel ISO Mtg TM/KM/BM Conventional Port 590-CS 83-300/400 C-7450 4A-2200-MT 444T Three-Pc. Carbon Steel Full Port 595-CS BA370 83-500/600 C-7480 4B-2200-MT 5944R Three-Pc. Carbon Steel ISO Mtg TM/KM C-7480 02 Y90 4B-2236-MT Full Port 595-CS 83R-100/200 C-7481 02 Y90 4D-2236-MT One-Pc. Stainless Steel Cast 560-S6 96-100 S-8100 33-3600-ML Two-Pc. Stainless Steel 580-S6 20 SS OR 76-100 S-8000 A36-MT 4866R Three-Pc. Stainless Steel Conventional Port 590-S6 85-100/200 S-8450 4A-3600-MT 466T Three-Pc. Stainless Steel Full Port 595-S6 BA360 86-100/200 S-8480 4A-3600-MT 5966R Three-Pc. Stainless Steel ISO Mtg TM/KM S-8480 02 Y90 4B-3636-MT Full Port 595-S6 S-8481 02 Y90 4D-3636-MT Flanged Ball Valves Uni-Body Flanged Ball Valves NIBCO Apollo Jamesbury Kitz Velan Watts Worcester Class 150 Carbon x Stainless F-510-CS-R-66/FS 88-140 5150-31-2236MT K150-SCTAM CF-1500-150-02-T316 5146RT150 Class 300 Carbon x Stainless F-530-CS-R-66/FS 88-740 5300-31-2236MT K300-SCTAM CF-1500-300-02-T316 5246RT300 Class 150 Stainless x Stainless F-510-S6-R-66/FS 87-100 5150-31-3600MT K150-UTAM SF-2500-150-02 5166RT150 Class 300 Stainless x Stainless F-530-S6-R-66/FS 87-700 5300-31-3600MT K300-UTAM SF-2500-150-02 5266RT300 Split-Body Full Port Flanged Ball Valves Description NIBCO Apollo Jamesbury Kitz Velan Watts Class 150 Carbon x Stainless F-515-CS-F-66/FS 88-240 6150-31-2236MT K-150-SCTBM F-01402-SSGA CF-1500-150-02 Class 300 Carbon x Stainless F-535-CS-F-66/FS 6300-31-2236MT-1 K300-SCTBM F-11402-SSGA CF-1500-150-02-T316 Class 150 Stainless x Stainless F-515-S6-F-66/FS 87-200 6150-31-3600MT K150-UTBM F-01413-SSGA SF-2500-150-02 Class 300 Stainless x Stainless F-535-S6-F-66/FS 6300-31-3600MT K300-UTBM F-11413-SSGA SF-2500-150-02 To be used as a guide only. Some variations in detail are possible. 113
NIBCO INC. 125% LIMITED WARRANTY Applicable to NIBCO INC. Pressure Rated Metal Valves NIBCO INC. warrants each NIBCO pressure rated metal valve to be free from defects in materials and workmanship under normal use and service for a period of five (5) years from date put into service. In the event any defect occurs which the owner believes is covered by this warranty, the owner should immediately contact NIBCO Technical Services, either in writing or by telephone at (888) 446-4226 or (574) 295-3000. The owner will be instructed to return said product, at the owner s expense, to NIBCO INC., or an authorized representative for inspection. In the event said inspection discloses to the satisfaction of NIBCO INC. that said valve is defective, it will be replaced at the expense of NIBCO INC.. Replacements shall be shipped free of charge to the owner. In the event of the replacement of any valve, NIBCO INC. shall further pay the owner the greater of Twenty-Five (25%) Percent of the price of the valve according to the published suggested list price schedule of NIBCO INC. in effect at the time of purchase, or Ten ($10.00) Dollars, to apply on the cost of the installation of said replacement valve. TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY SPECIFICALLY EXCLUDES INCIDENTAL AND CONSEQUENTIAL DAMAGES OF EVERY TYPE AND DESCRIPTION RESULTING FROM ANY CLAIMED DEFECT IN MATERIAL OR WORKMANSHIP, INCLUDING BUT NOT LIMITED TO, PERSONAL INJURIES AND PROPERTY DAMAGES. Some states or countries do not allow the exclusion or limitation of incidental or consequential damages so these limitations may not apply to you. TO THE EXTENT PERMITTED BY LAW, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and country to country. how to order State quantity, figure number and size for each valve you wish to order. See individual valve catalog pages for specific or special product designations. HOW MANY TO ORDER NIBCO valves are decimal packed for your convenience in handling, shipping and stockkeeping. Number in master carton varies with item. POLICY ON RETURNS TO FACTORY NO NIBCO valves are to be returned without prior written agreement. Transportation must be prepaid. A 20% charge will be made to cover cost of rehandling and reinspection. TECHNICAL ASSISTANCE Engineers, contractors, wholesalers or manufacturers may obtain special or technical assistance from any factory representative of NIBCO. Write, fax or phone. NIBCO INC. World Headquarters 1516 Middlebury Street Elkhart, IN 46516-4740 USA Phone: 1.574.295.3000 Fax: 1.574.295.3307 Technical Service Phone: 1.888.446.4226 Fax: 1.888.336.4226 To the best of our knowledge, the information contained in this publication is accurate. However, NIBCO does not assume any liability whatsoever for the accuracy or completeness of such information. Final determinations of the suitability of any information or product for the use to be contemplated is the sole responsibility of the user. The manner of that use, and whether there is any infringement of patents, is also the sole responsibility of the user. 114
globally connecting you at all levels It s a new age of business, and a new way at NIBCO. From Elkhart, Indiana to Lodz, Poland, and points beyond, our company has integrated manufacturing, distribution, and networked communications to provide a seamless source of information and service, 24 hours a day, 7 days a week. But this integration hasn t happened overnight. It s been part of a long-term strategic process that has pushed us to reconsider every aspect of our business. The result? We re a vertically integrated manufacturer with the products and systems in place to deliver low cost and high quality. NIBCO products are manufactured under a Quality Management System conforming to the current revision of ISO-9001 International Standards. We know the flow control industry is only going to get more demanding, and we are more than ready. We will continue to lead. That s what NIBCO is all about. World Headquarters Elkhart, Indiana Manufacturing Distribution International Metal Valves and Fittings Blytheville, Arkansas McAllen, Texas Nacogdoches, Texas Stuarts Draft, Virginia Plastic Pipe, Valves, and Fittings Greensboro, Georgia Goshen, Indiana Lebanon, Ohio Industrial Plastics * * * * * * Charlestown, Indiana International Reynosa, Mexico Lodz, Poland *Denotes U.S. and International Direct Shipping Locations * U.S. Distribution Centers Elkhart, Indiana Global Offices Elkhart, Indiana Lodz, Poland TECH SERVICES PH:1.888.446.4226 FAX: 1.888.336.4226 INTERNATIONAL OFFICE PH: +1.574.295.3327 FAX: +1.574.295.3455
Featuring nibco NIBCO PEX Piping Systems NIBCO Press System systems C-BV-0413 Fittings Wrot and cast copper pressure and drainage fittings Cast copper alloy flanges Wrot and cast press fittings ABS and PVC DWV fittings Schedule 40 PVC pressure fittings CPVC CTS fittings CPVC CTS-to-metal transition fittings Schedule 80 PVC and CPVC systems CPVC metric piping systems CPVC BlazeMaster fire protection fittings Lead-Free* fittings BlazeMaster is a registered trademark of The Lubrizol Corporation. *Weighted average lead content 0.25% Valves & Actuation Pressure-rated bronze, iron and alloy-iron gate, globe and check valves Pressurerated bronze ball valves Boiler specialty valves Commercial and industrial butterfly valves Circuit balancing valves Carbon and stainless steel ball valves ANSI flanged steel ball valves Pneumatic and electric actuators and controls Grooved ball and butterfly valves High performance butterfly valves UL/FM fire protection valves MSS specification valves Bronze specialty valves Low pressure gate, globe, check and ball valves Frostproof sillcocks Quarter--turn supply stops Quarter-turn low pressure valves PVC ball valves CPVC CTS ball valves Just Right recirculating valves Bronze & Iron Y-Strainers Lead-Free* valves Coil-Connect Kits *Weighted average lead content 0.25% Chemtrol Thermoplastic pipe, valves and fittings in PVC, Corzan CPVC, polypropylene and PVDF Kynar Pneumatic and electric actuation systems Corzan is a registered trademark of The Lubrizol Corporation. Kynar is a registered trademark of Arkema Inc. enibco EDI Electronic Data Interchange VMI Vendor Managed Inventory NIBCO.com NIBCOpartner.com Nibco inc. world headquarters web: 1516 Middlebury Street Elkhart, IN 46516-4740 usa Domestic customer service phone: 800.234.0227 fax: 800.234.0557 technical service phone: 888.446.4226 fax: 888.336.4226 international office phone: +1/574.295.3327 fax: +1/574.295.3455 C-BV-0413 2013 NIBCO INC., All Rights Reserved. Printed in U.S.A.