Cress Furnaces. Cress Manufacturing Co. Bringing you years of. experience in the. heat treating industry. Quality low cost. with a fast turnaround.

Similar documents
Transcription:

Cress Furnaces Meeting your needs in different applications: Metal, Glass and Quartz Cress Manufacturing Co. Bringing you years of experience in the heat treating industry. Quality low cost with a fast turnaround. Let us help you with your heat processing needs.

Cress Manufacturing Company Inc., Is a leader in the industry of manufacture of electric furnaces. We are an organization that provides services and goods for the heat treating industry. Our goal is to achieve an excellent product to satisfy the needs and requirements of our customers. Cress was founded in 1973, as a company with a simple concept to provide exceptionally high quality products and services. With this goal in mind, Cress has evolved into a very important manufacturer and distributor of heat treating furnaces, in the United States and many other countries. We manufacture, export and distribute heat treating furnaces for the metal industry, quartz glass, industrial ceramics, jewelry, porcelain, pottery, ornamental ceramics and many other applications. For our company, innovation is essential to transform a good idea into a product or service of high value to our customers. We can adapt to the needs of our customers; therefore, if you have something in mind we can build it for you. With these ideas in mind, we strive to provide better services and products that will last and provide years of service. Furnace Selection Our industrial furnaces can be classified as one of two basic types, Heat Treating Furnaces also known as hardening furnaces and Draw Furnaces also known as annealing, tempering or forced convection furnaces. Heat treat (Hardening) furnaces have higher heat output power than draw furnaces due to the elevated temperatures at which they operate. Heat transfer to the tool steel is accomplished by a very efficient process called direct radiation. Temperature uniformity in these furnaces is best in the red heat range. Normal maximum temperature is 2250 F (1232 C). Optional 2400 F (1316 C) maximum temperature versions are available. Draw furnaces are used for tempering and other low temperature processes. They normally operate at temperatures below red heat range where heat transfer to the tool steel is accomplished by the process of convection heat transfer. To increase convection efficiency, these furnaces are equipped with a fan in the heating chamber to move air (Forced Convection). This delivers a temperature uniformity of ± 10 F (± 6 C) or better. Maximum temperature is 1250 F (677 C). Optional 2000 F (1093 C) maximum temperature versions are available. Heat treating processes consist of two basic steps, hardening and tempering. Hardening processes occur at high temperatures that are well into the red heat range. Drawing, tempering and annealing processes normally occur at temperatures below red heat range. When a part is hardened, it is heated to a high temperature, held there for a required time period, then removed from the furnace to be quenched (Cooled). This is usually accomplished by submerging the part into a liquid quenching material or by placing the part on a cooling rack in still air. The part should only be cooled to about 150 F (66 C), and then placed into a furnace at the tempering temperature. Due to the heat treat furnace not being able to cool as fast as the part, it is best to have a separate furnace for each step of the process. 2 Cress Manufacturing Company Inc. 4736 Convair Drive Carson City, Nevada 89706-0493

Digital Temperature Control Selection Digital temperature controls fall into two basic types, process controllers and high limit controls (over temperature controls). Process Controls handle the temperature and time requirements of the heat treat processes. These controls come in two types, non-programmable (single set point) and programmable. Non-Programmable controls such as the model PM3E are a single set point control, you simply input the desired temperature. The furnace heats to the desired temperature as fast as possible. The furnace will stay at the set temperature until changed or turned off. This is the least expensive standard control. Programmable Controls such as the models PM4R and the F4H allow the heat up rate to be controlled, temperature can be ramped down as well as ramped up, multi-step heat treating can be input as a single process, your heat treat process programs can be stored in the controls memory for easy and accurate repeatability. In manual mode (non-program) operation, the controls work the same as the model PM3E. High Limit Controls such as the model LV help protect the furnace and your load in the case of a failure in the primary (process) control or other related primary control loop components. The high limit control loop is completely independent of the primary control loop. The programmable process controls are available with an optional audible alarm feature, which can signal desired process points and end of process. A data communications option is also available, which allows full control interface with a computer. STANDARD WATLOW PM4R CONTROL FOUR 10 STEP PROGRAM MEMORY FILES Microprocessor-based, ¼ DIN programmable ramping control providing four, 10 step program memory fizles, or easy to use non-ramping set point operation. The PM4 is designed to operate in the most demanding industrial environments. Interface: membrane Front panel push buttons, dual LED displays WATLOW F4 CONTROL 250 STEP RAMPING CONTROL This microprocessor based ¼ DIN ramping control providing 250 steps of programmability within up to 40 nameable profiles. Control over broad temperature ranges using the four sets of PID parameters. Interface: Membrane front panel, single four digit LED s with second four line LCD display. ECONOMY WATLOW PM3E CONTROL Microprocessor based single set-point control Interface: Membrane front panel, dual LED displays. OPTIONAL WATLOW LV HIGH LIMIT CONTROL (ADDITIONAL to primary control) This FM approved limit control is operated using a separate thermocouple. Mechanical relays break power to the elements when tripped. A High Limit Control gives added assurance at a small cost that the furnace and materials fired do not exceed the temperature indicated. Call Us 800-862-7377 775-884-2777 Fax 775-884-2991 Visit our web site www.cressmfg.com or e-mail us at info@cressmfg.com 3

Models C-601 and C401H Options: Dual chamber Stainless steel case Audible process alarm. USES: These models are designed for those users who require automatic temperature controlled furnaces from 250 F to 2000 F (Model C-601) or up to 2250 F (Model C401H) at a low cost. An ideal unit for many of the small jobs found in Tool rooms, Production Shops or Laboratory. CONTROL: Auto tuning Microprocessor Based controller. ELEMENTS: C-601 chrome nickel wire. C401H High Temperature iron-aluminum wire. WIRING: Furnace is completely wired and equipped with cord ready to plug into a 115 Volt outlet. Control, relay and wiring connections are enclosed on the base. GENERAL CONSTRUCTION: Furnace case of sheet steel is assembled by use of electrical welding and sheet metal screws. The spring counter-balance door rises vertically on lever arrangement keeping the hot face away from operator. The C401H walls and door are constructed of high quality insulating brick backed by 1800 F block insulation. Furnace is finished in heat resistant hammer tone gray. SAFETY SWITCH: These models come equipped with a door safety switch. When door is opened, power is disconnected from the heating elements. SIZE OVERALL SIZE IN- TERMITTENT CONTINUOS KW MODEL W L H W L H INPUT WEIGHT / LBS C401H 6.5 9 5.5 15.5 17.5 22 2250 F 2000 F 1.6 100 C601 8.5 10 6.5 15.5 17 22 2000 F 1800 F 1.4 100 Model C133 and C136 USES: These furnaces are designed for general use in the shop, laboratory or factory where temperatures from 300 F to 2250 F are required. They are used for heat treating metal, assaying and all types of testing. CONTROLS: Auto tuning Microprocessor-based controller. ELEMENTS: High temperature iron-aluminum alloy wire elements are coiled and mounted on the side walls in porcelain plates. THE C133 has a bottom element mounted in groves in floor and covered by refractory heart plate. MODEL C136 assaying furnace has no bottom element and the side elements are raised 1.75 above the floor to prevent burnout due to spillage. GENERAL CONSTRUCTION: Case is constructed of heavy gauge sheet steel and finished in gray hammertone. The easily operated, counter-balanced door is always away from operator. All walls and door are constructed of the finest quality insulating fire brick backed by 1800 F block insulation. Comes complete with cord and plug. SAFETY SWITCH: These models come equipped with two door safety switches. When door is opened, elements are disconnected from power source. Solid state zero voltage switching of power to elements. OPTIONS: Stainless steel port option for protective inert atmosphere. Audible process alarm. MODEL SHOWN C136 SIZE OVERALL SIZE INTERMIT- CONTINUOUS KW WEIGHT MODEL W L H W L H TENT INPUT LBS C133 11.5 13 8 23.5 26.5 27 2250 F 2000 F 3.2 200 C136 11 13 8 23.5 26.5 27 2250 F 2000 F 3.8 200 4 Cress Manufacturing Company Inc. 4736 Convair Drive Carson City, Nevada 89706-0493

Bench Top Heat Treating Furnaces USES: These furnaces are designed for general use in the shop, laboratory or factory where temperatures from 300 F to 2250 F are required. They are used for heat treating metal, assaying and all types of testing. 2400 F Maximum temperature option available at additional cost. CONTROLS: Auto tuning Microprocessor-based controller. HEATING ELEMENTS: Alloy wire elements are coiled and mounted on the side walls in easy to change porcelain plates. GENERAL CONSTRUCTION: The furnace case is constructed of heavy gauge sheet steel and finished in gray hammertone. The walls and door are constructed of the finest quality insulating fire brick backed up by 1800 F block insulation. SAFETY SWITCH: These models come equipped with dual door safety switches. When the door is opened, power is disconnected from the heating elements. DOOR: The counter balanced easy to operate door, opens up and away from the furnace, keeping the hot side away from the operator. A KAOWOOL rope seal is installed on the door where it meets the chamber. Options: Stands and quench tanks for these model furnaces are available for an additional cost Optional inlet port for protective inert atmosphere is available Optional high limit control available Audible process alarm HEAT TREAT FURNACES SIZE OVERALL SIZE INTERMITTENT CONTINUOUS WEIGHT MODEL W L H W L H KW INPUT LBS C1228 12 20 8 25 34 28 2250 F 2000 F 6.2 300 C1232 12 32 8 25 45 28 2250 F 2000 F 6.2 425 C1240 12 40 8 25 54 28 2250 F 2000 F 12.5 600 C122012 12 20 12 25 34 32 2250 F 2000 F 6.2 450 C162010 16 20 10 29 34 31 2250 F 2000 F 9.4 400 C162012 16 20 12 29 34 33 2250 F 2000 F 9.4 450 C163210 16 32 10 29 46 31 2250 F 2000 F 12.5 500 C163212 16 32 12 29 46 33 2250 F 2000 F 12.5 550 C181822 18 22 18 35 49 49 2250 F 2200 F 14.5 700 C181824 18 24 18 35 51 49 2250 F 2000 F 14.5 750 Call Us 800-862-7377 775-884-2777 Fax 775-884-2991 Visit our web site www.cressmfg.com or e-mail us at info@cressmfg.com 5

Bench Top Tempering Furnaces OPTIONS: Stands and quench tanks for these model furnaces are available for an additional cost Audible process alarm Optional high limit controls available DRAW UNITS: These models are equipped with a stainless steel fan and motor for forced convection temperature uniformity. USES: These furnaces are designed for general use in the shop, laboratory or factory where temperatures from 300-1250 F. ±10 F are required. They are used for such purposes as tempering, annealing and stress relieving. 2000 F maximum temperature option is available for all models at additional cost. CONTROLS: Auto tuning Microprocessor-based controller and solid state relays for precise temperature control. HEATING ELEMENTS: Alloy wire elements are coiled and mounted on the side walls in easy to change porcelain plates. GENERAL CONSTRUCTION: The furnace case is constructed of heavy gauge sheet steel and finished in gray hammertone. The walls and door are constructed of the finest quality insulating fire brick backed up by 1800 F block insulation. Comes complete with cord and plug. SAFETY SWITCH: These models come equipped with dual safety switches. When the door is opened, power is disconnected from the heating elements and fan motor. DOOR: The counter balanced easy to operate door, opens up and away from the furnace, keeping the hot side away from the operator. A KAOWOOL rope seal is installed on the door where it meets the chamber. SIZE OVERALL SIZE INTERMITTENT CONTINUOUS KW MODEL W L H W L H INPUT WGHT/LBS C1228 DW 12 17 8 25 43 28 1250 F 1000 F 4.3 400 lbs C1232DW 12 29 8 25 54 28 1250 F 1000 F 6.8 500 lbs C122012DW 12 17 12 25 43 32 1250 F 1000 F 4.3 550 lbs C162010DW 16 17 10 29 43 31 1250 F 1000 F 6.2 500 lbs C162012DW 16 17 12 29 43 31 1250 F 1000 F 6.2 650 lbs C163210DW 16 29 10 29 54 31 1250 F 1000 F 8.1 600 lbs 6 Cress Manufacturing Company Inc. 4736 Convair Drive Carson City, Nevada 89706-0493

Assaying Bench Top Furnaces USES: These furnaces are designed for assaying use in the shop, laboratory or factory where temperatures from 300 F to 2250 F are required. They are used for assaying, heat treating metal and all types of testing. CONTROLS: Auto tuning Microprocessor-based controller. SPECIAL FEATURES: Embedded elements and clean air exhaust system is installed. GENERAL CONSTRUCTION: The furnace case is constructed of heavy gauge sheet steel and finished in gray hammertone. The walls and door are constructed of the finest quality insulating fire brick backed up by 1800 F block insulation. Alloy wire elements are coiled and mounted on the side walls in easy to change porcelain plates. SAFETY SWITCH: These models come equipped with dual door safety switches. When the door is opened, power is disconnected from the heating elements. DOOR: The counter balanced easy to operate door, opens up and away from the furnace, keeping the hot side away from the operator. A KAOWOOL rope seal is installed on the door where it meets the chamber. OPTIONS: Stands and quench tanks for these model furnaces are available for an additional cost. Optional inlet port for protective inert atmosphere is available. Optional high limit control available. Audible process alarm. ASSAYING BENCH TOP FURNACES SIZE OVERALL SIZE INTERMITTENT CONTINUOUS KW WEIGHT MODEL W L H W L H INPUT LBS AC136 11 13 8 23.5 38 27 2250 F 2000 F 3.8 200 AC1228 12 20 8 25 40 28 2250 F 2000 F 6.25 300 AC1232 12 32 8 25 52 28 2250 F 2000 F 6.25 350 AC122012 12 20 12 25 40 32 2250 F 2000 F 6.25 450 AC162010 16 20 10 29 40 31 2250 F 2000 F 9.4 400 AC162012 16 20 12 29 40 33 2250 F 2000 F 9.4 550 AC163210 16 32 10 29 52 31 2250 F 2000 F 12.5 500 AC163212 16 32 12 29 52 33 2250 F 2000 F 12.5 550 Call Us 800-862-7377 775-884-2777 Fax 775-884-2991 Visit our web site www.cressmfg.com or e-mail us at info@cressmfg.com 7

Dual Furnace MODEL SHOWN IS C122012 OPTIONS: High limit controls available. Inlet port for protective inert atmosphere is available. 480 volts. 3 phase. Audible process alarm. USES: Designed for those who desire a hardening furnace, a quench tank plus a separate furnace for tempering or drawing all within a Minimum floor space. The two chambers allow for immediate tempering or drawing after quench without waiting for the hardening furnace to cool to the lower temperature required. CONTROLS: Both chambers are equipped with their own electronic control, thermocouples and solid state relays. Auto tuning microprocessor based controls are accurate to ± 1/4 of 1%. Each chamber is equipped with door safety switches that remove power from that chambers heating elements and fan blower. HEATING ELEMENTS: Alloy wire elements are coiled and mounted on the side walls in easy to change porcelain plates. GENERAL CONSTRUCTION: Case is constructed of galvanized sheet metal and mounted in angle steel frame. Space is provided for air circulation between chambers, the quench tank is stored beneath the lower chamber and can be rolled out for use. The control panel face is attractive brushed stainless steel. The upper chamber door rises vertically, the lower chamber door swings to the side. A heavy duty chrome plated latch is used to hold the lower door closed. The lower chamber is equipped with a stainless steel, centrifugal type fan to circulate the air and provide very close temperature gradients. The fan is operated by a 1/4 HP motor. Easy access to controls and wiring is provided by removable side panel on control cabinet. Welded steel plate quench tank on caster is standard on most dual units. Door seal is standard for inert protective atmosphere on 2250 F chambers. MODEL UPPER C H A MBER SIZE W L H LOWER SIZE W L H OVERALL SIZE W L H UPPER LOWER KW INPUT WEIGHT LBS C136D 10.5 13 8 10.5 10 8 25 35 45 2250 F 1250 F 8.3 400 C2121 12 20 8 12 17 8 38 48 57 2250 F 1250 F 10.6 800 C122012D 12 20 12 12 17 12 38 48 65 2250 F 1250 F 10.6 950 C1232D 12 32 8 12 29 12 36 50 56 2250 F 1250 F 10.6 900 C1240D 12 40 8 12 37 8 36 58 56 2250 F 1250 F 20.5 1400 C163210D 16 32 10 16 29 10 43 60 62 2250 F 1250 F 20.5 1400 C163212D 16 32 12 16 29 12 43 60 66 2250 F 1250 F 20.5 1400 8 Cress Manufacturing Company Inc. 4736 Convair Drive Carson City, Nevada 89706-0493

AE Furnaces Single Chamber USES: These furnaces are designed for heavy duty, larger volume jobs requiring controlled temperatures up to 2100 ºF continuous or 2250 ºF intermittent. CONTROLS: These furnace come standard with a digital programmable main control and a digital high limit safety control. Solid state power switching to the heating elements, and dual door limit safety switches that interrupt power to the elements when the door is opened. ELEMENTS: High temperature alloy wire elements are mounted in porcelain plates on the walls and floor and in grooves in the brick door, this provides all around heating and close gradients throughout the furnace chamber. A ceramic hearth plate covers the floor element. GENERAL CONSTRUCTION: Case is finished in a pleasing gray hammertone. The counter-weighted vertical rising door keeps the hot face away from the operator, it opens easily, remains securely in both the open and close positions and includes a Kaowool rope seal. All walls and door are constructed of 4 ½ of the finest quality insulating fire brick backed up by 2 of 1800 ºF block insulation. This combination of insulation and wall thickness helps to give fast heat up and excellent heat retention for economical operation. All Standard 240 VAC, 3 Phase. Options: Side opening door. DW models for drawing include stainless steel fan to circulate air and provide very close temperature gradients. Quench tanks for AE models are available for an additional cost. Stainless steel port option for protective inert atmosphere operation is available. Optional 208 or 480 VAC, 3 Phase. Draw units available with an optional 2000 F Maximum temperature fan. Audible process alarm. AE HEAT TREAT FURNACES SPECIFICATIONS SIZE OVERALL SIZE INTERMITTENT CONTINUOUS KW MODEL W L H W L H INPUT WEIGHT/LBS AE1520 15 20 15 33 46 67 2250 F 2100 F 10 1200 AE1824 18 24 18 36 50 70 2250 F 2100 F 16 1400 AE1836 18 36 18 36 62 70 2250 F 2100 F 20.5 1800 AE1848 18 48 18 36 74 70 2250 F 2100 F 23 2200 DRAW UNITS AE1520DW 15 15 15 33 46 69 1250 F 1200 F 10 1400 AE1824DW 18 19 18 36 50 70 1250 F 1200 F 12 1600 AE1836DW 18 31 18 36 62 70 1250 F 1200 F 18 2050 AE1848DW 18 43 18 36 74 70 1250 F 1200 F 21 2400 Call Us 800-862-7377 775-884-2777 Fax 775-884-2991 Visit our web site www.cressmfg.com or e-mail us at info@cressmfg.com 9

AE Dual Furnaces Models: AE1520D, AE1824D, AE1836D and AE1848D OPTIONS: Both doors side opening 2000 ºF lower chamber Stainless steel port option for protective inert atmosphere operation for upper chamber. Quench tanks for AE models are available for an additional cost. Audible process alarm. Optional 208 or 480 VAC, 3 Phase. USES: Designed for those who desire a large hardening furnace plus a separate furnace for tempering or drawing, all within a Minimum floor space. The two chambers allow for immediate tempering or drawing after quench without waiting for the hardening furnace to cool to the lower temperature required. CONTROLS: These furnaces come standard with two sets of individual digital programmable control and a digital high limit safety control. Solid state power switching to the heating elements. Each chamber is equipped with dual door limit safety switches that interrupt power to the elements when the door is opened. Fan stops when lower door is opened. (Note: door blocks view of the lower set of controls) ELEMENTS: High temperature alloy wire elements are mounted in porcelain plates on the walls and floor and in grooves in the brick door, this provides all around heating and close gradients throughout the furnace chamber. A ceramic hearth plate covers the floor element. GENERAL CONSTRUCTION: Furnace frame is constructed of heavy steel angle with 18 gauge sheet steel metal panels to form exterior case. Door of upper unit rises vertically and the door of the lower unit swings to the side. A Kaowool rope seal is installed on the upper and lower doors where it meets the chamber. A chrome refrigerator latch is used to hold the lower door closed. Lower unit is equipped with an stainless steel, centrifugal type fan to circulate the air and provide very close temperature gradients. The fan is operated by a 1 HP motor. All Standard 240 VAC, 3 Phase. MODEL UPPER C H A MBE R SIZE W L H LOWER C H A MBER SIZE W L H AE DUAL FURNACES-SPECIFICATIONS OVERALL SIZE W L H UPPER LOWER KW INPUT WEIGHT LBS AE1520D 15 20 15 15 15 15 33 46 67 2250 F 1250 F 20 2000 AE1824D 18 24 18 18 19 18 36 50 70 2250 F 1250 F 28 2500 AE1836D 18 36 18 18 31 18 53 72 89 2250 F 1250 F 40 3200 AE1848D 18 48 18 18 43 18 53 84 89 2250 F 1250 F 44 4000 10 Cress Manufacturing Company Inc. 4736 Convair Drive Carson City, Nevada 89706-0493

Models C30FH and C36FH USES: These large capacity furnaces can be used for various types of heat treatment processes which require temperatures up to 2100 ºF continuos temperature or 2250 F intermittent. CONTROLS: These furnaces come standard with a digital programmable main control and a digital high limit safety control. Solid state power switching to the heating elements, and dual door limit safety switches that interrupt power to the elements when the door is opened. All wiring is complete and ready to be connected to your power source. Input controls allow operator to adjust temperatures of various zones so that uniform temperatures can be had throughout the chamber. ELEMENTS: High temperature alloy wire elements are mounted in grooves on the walls and door, this provides all around heating and close gradients throughout the furnace chamber. GENERAL CONSTRUCTION: Furnace frame is constructed of 2½ x 2½ x 3/16 angle steel with 18 gauge sheet steel panels. The door is mounted on heavy hinges on the side and secured in the closed position with a heavy duty latch. A Kaowool rope seal is installed on the door where it meets the chamber. The exterior is finished in a hammertone gray enamel. Walls are constructed of 4½ of insulating brick backed up by 2 of 1800 F block insulation. The 24 x 24 x 30 chamber in the C30FHWC gives you 10 cubic ft. of space, and the 24 x 24 x 36 chamber in the C36FH gives you 12 cubic ft. of space. Standard 240 VAC, 3 Phase. 208 or 480 VAC optional. Also available with an optional vertical rising door. OPTIONS: Vertical opening door. Stainless steel port option for protective inert atmosphere operation is available. Draw units available with an optional 2000 F Maximum temperature fan Quench tanks are available for an additional cost Audible process alarm C30FH & C36FH FURNACE-SPECIFICATIONS SIZE OVERALL SIZE INTERMITTENT CONTINUOUS KW WEIGHT MODEL W L H W L H INPUT LBS C30FH 24 24 30 48 41 70 2250 F 2000 F 14 1400 C36FH 24 24 36 48 41 76 2250 F 2000 F 14 1600 C30FHDW 24 24 28 48 41 86 1250 F 1050 F 14 1550 C36FHDW 24 24 34 48 41 91 1250 F 1050 F 14 1750 Call Us 800-862-7377 775-884-2777 Fax 775-884-2991 Visit our web site www.cressmfg.com or e-mail us at info@cressmfg.com 11

Models C336 and C444 USES: These large capacity furnaces can be used for various types of heat treatment processes which require temperatures from 200 ºF to 1950 ºF. The 6 bladed axial flow fan mounted in the roof circulates the air within the chamber resulting in close gradients throughout. OPTION: 2250 ºF rating using a 4 zone control package. CONTROLS: These furnaces come standard with a digital programmable main control and a digital high limit safety control. Solid state power switching to the heating elements, and dual door limit safety switches that interrupt power to the elements when the door is opened. All wiring is complete and ready to be connected to your power source ELEMENTS: Heavy chrome-nickel wire elements are coiled and mounted in grooves in walls and door to provide all around heating which also helps produce close gradients throughout the chamber. GENERAL CONSTRUCTION: Furnace frame is constructed of heavy steel angle with 18 gauge sheet metal panels to form exterior case. Case is finished in a pleasing gray hammertone. The vertical rising door is mounted on heavy levers and is opened by lifting up on a wide handle. The counterweight holds the door up in the raised position and the weight of the door gives a good brick seal in the lowered position. A Kaowool rope seal is installed on the door where it meets the chamber. This door protects the operator from burns because the hot surface always faces away from him. Door opens manually very smoothly and easily. All walls and door are constructed of 4½ of the finest quality insulating brick backed up by 1½ of block insulation. The roof is arched giving added strength and providing space for fan. This combination of insulation and wall thickness helps to give fast heat up and excellent retention for economical operation. OPTIONS: 480 Volt, 3 Phase. 2250 ºF Maximum Temperature Heating Coils In Plate. Embedding Of Heating Coils In Plate Temperature Recorders Are Available Audible Process Alarm C444, shown with optional embedded heating elements in plates. SPECIFICATIONS SIZE OVERALL SIZE INTERMIT- CONTINUOUS KW WEIGHT/ MODEL W L H W L H TENT INPUT LBS C336 36 36 36 61 66 90 1950 F 1950 F 27 3400 C444 48 48 48 72 84 101 1950 F 1750 F 72 5500 C336 * 36 36 36 70 66 108 1950 F 1950 F 27 3700 C444* 48 48 48 78 84 135 1950 F 1950 F 72 5850 * With Pneumatic assist. 12 Cress Manufacturing Company Inc. 4736 Convair Drive Carson City, Nevada 89706-0493

Glass and Quartz Annealing Furnaces USES: These furnaces are designed primarily for annealing glass, or use as a bake out oven. However, it can be used for any purpose requiring controlled temperatures of up to 2250 ºF. When inquiring, please state temperature desired. CONTROLS: These furnaces come standard with a digital programmable main control and a digital high limit safety control. Solid state power switching to the heating elements, and dual door limit safety switches that interrupt power to the elements when the door is opened. ELEMENTS: High temperature alloy wire elements are mounted in grooves in the brick walls. The design of the heating coils provides all around heating and close gradients throughout the furnace chamber. GENERAL CONSTRUCTION: Heavy angle steel frame with 18 gauge sheet metal panels form the case. The walls are constructed of 4.5 of the finest quality insulated firebrick backed up by 1800 ºF block insulation. Counterweight lid opens easily. The lid is insulated with ceramic fiber or brick. This combination of insulation and wall thickness helps to give fast heat up and excellent heat retention for economical operation. OPTIONS: 480 volt 3 phase power. Audible process alarm. Data communications package. SPECIFICATIONS G SERIES FURNACES SIZE OVERALL SIZE INTERMITTENT CONTINUOUS KW WEIGHT MODEL W L H W L H INPUT LBS G4H 12 12 48 71 34 75 2250 F 2100 F 15 790 G5H 12 12 60 71 34 87 2250 F 2100 F 18 990 G6H 12 18 48 70 40 75 2250 F 2100 F 18 1185 G7H 18 18 36 80 40 63 2250 F 2100 F 16 1035 G8H 12 12 96 71 34 123 2250 F 2100 F 12 1685 G9H 18 18 48 80 40 75 2250 F 2100 F 14 1150 G11H 18 18 60 80 40 87 2250 F 2100 F 15 1200 G18H 18 18 96 80 40 123 2250 F 2100 F 30 1600 G22H 18 18 120 80 40 147 2250 F 2100 F 34 2200 Call Us 800-862-7377 775-884-2777 Fax 775-884-2991 Visit our web site www.cressmfg.com or e-mail us at info@cressmfg.com 13

Aluminum Drop Bottom USES: These bottom opening quick quench furnaces, are designed for aluminum heat treatment to a maximum temperature of 1200 ºF. Temperature gradients are ± 5 ºF or less. CONTROLS: These furnaces come standard with a Model SD, digital LED readout microprocessor programmable control mounted in a separate free standing control cabinet. There is an independent digital high limit safety control and independent contactor and dual door limit safety switches that interrupt power to the elements and fan when the door is opened. ELEMENTS: Elements are heavy gage chrome- Nickel mounted in grooves on all four sidewalls of the furnace behind the stainless steel baffle. The design of the heating coils provides all around heating and close gradients throughout the furnace chamber. GENERAL CONSTRUCTION: Heavy angle steel frame with 18 gauge sheet metal panels form the case. The walls are constructed of 4.5 of the finest quality insulated firebrick backed up by 1800 ºF block insulation. This combination of insulation and wall thickness helps to give fast heat up and excellent heat retention for economical operation. The furnace door can be opened and the load rack lowered into the quench tank within six seconds. The door rolls easily on casters mounted on an inclined track. Air assist is used to raise and lower loads up to 1000 lbs. easily. The uniform temperature is accomplished by a 15 stainless steel fan mounted in the roof, which circulates air down the sidewalls and up through the load. A full stainless steel baffle within the furnace directs airflow. The insulated quench tank is mounted on V groove casters with a track so it can be rolled back out of the way. OPTIONS: Quench tank heater and circulation pump system Stainless steel load basket 480 volts 3 phase power Audible process alarm Data communications package SPECIFICATIONS IN- TERMITTENT CONTINUOUS SIZE OVERALL SIZE KW MODEL W L H W L H INPUT WEIGHT/LBS R24S 36 36 21 57.5 112 158 1200 F 1000 F 30 2400 R36S 36 36 36 57.5 112 158 1200 F 1000 F 45 3000 R36T 36 36 36 57.5 112 204 1200 F 1000 F 45 3000 14 Cress Manufacturing Company Inc. 4736 Convair Drive Carson City, Nevada 89706-0493

Bell Type Furnaces USES: These bottom opening furnaces, are designed for heat treatment at temperatures up to 2250 ºF. Temperature gradients are ± 5 ºF or better. CONTROLS: These furnaces come standard with an easy to use digital programmable 4 zone system and a high limit backup system. Mounted in a separate free standing control cabinet. Dual safety switches that interrupt the power to the heating coils when the unit is raised. ELEMENTS: Special PM elements for long life at low and high temperatures. Elements are heavy gage, mounted in grooves in all sidewalls of the furnace. The design of the heating coils provides all around heating and close gradients throughout the furnace chamber. GENERAL CONSTRUCTION: Heavy angle steel frame holds the body of the furnace, the walls are constructed of 3 of the finest quality insulated firebrick. The furnace is bottom opening by means of a counterweight which lifts the entire furnace vertically above the base of the frame. A kaowool rope seal is installed in the bottom.. Close temperature uniformity tolerances are maintained during dynamic heat up, as well as top temperature soaks using matched thermocouples and four zone control. Options: Stainless steel ports 3 phase power Audible process alarm Data communications package 2400 F Optional SPECIFICATIONS MODEL SIZE OVERALL SIZE MAX. INTERMITTENT MAX. CONTINUOUS KW INPUT BT29 29 H X 23 3/8 48 W, 50 L, 83 H 2250 F 2000 F 13.5 DECAGON BT28 29 H, 28 DODECAGON 54 W, 57 L, 83 H 2250 F 2000 F 16.3 Call Us 800-862-7377 775-884-2777 Fax 775-884-2991 Visit our web site www.cressmfg.com or e-mail us at info@cressmfg.com 15

Accessories STANDS FOR BENCH TOP FURNACES Available for: C133, C136, C1228, C122012, C1232, C1240, C1632, C1620 For other models please ask us QUENCH TANKS W L H 17 17 17 17 34 17 REFERENCE BOOK Heat Treatment, Selection and Application of Tool Steels By William E. Bryson. TONGS 45 31.5 long and 37 are 39.25 long. TOOL WRAP STATION Foil wrap 24 width - 50 ft rolls 2000 F Foil wrap 24 width - 100 ft roll 2000 F Foil wrap 24 width - 50 ft roll high temperature 2240 F 16 Cress Manufacturing Company Inc. 4736 Convair Drive Carson City, Nevada 89706-0493