Temperature measurement of metals regardless of emissivity

Piros S Ratiopyrometer Q series 600 C up to 2500 C Temperature measurement of metals regardless of emissivity

Piros S Pyrometer General information Q series Piros pyrometers are non-contact measuring thermometers with analog outputs. Due to their measuring principle the ratio pyrometers of the Q series allow temperature measurement regardless of emissivity. For temperature measurement of metals we offer the stationary design OKS Q in various versions with measurement ranges between 600 C and 2.500 C. The sensors have been designed for control and monitoring tasks in many varied industries: steel works and rolling mills forging works furnace construction welding casting We recommend the use of our questionnaire for application analysis so that the user does not necessarily need to cope with the theory of radiation measurement. The following criteria are relevant for the selection of the correct sensor: size and material of the object minimum/maximum object temperature distance from sensor to the desired measuring area ambient temperature Highlights at a glance Stainless steel housing with M40 thread Plug connection with S10 plug (M18) Temperature range: 600 C up to 1400 C for metal 700 C up to 1800 C for metal 800 C up to 2500 C for metal Electrical connection: 24 V DC 0/4-20 ma output signal RS 485 interface (galvanically isolated) for parameterization and measuring data transmission with PC software Technical data: spectral range of 0,7-1,1 µm response times from 5 ms measuring areas from 1,5 mm diameter only 10% covering of the measuring spot necessary (OKS L Q18.194 S10) measuring failure 0,5% emissivity and ratio correction adjustable MODBUS RTU Laser pilot light maximum value memory fiber optic cable versions up to 250 C ambient temperature Software The integrated RS 485 interface allows via software the display and adaption of the following parameters: temperature display C / F measuring range settings emissivity ratio correction maximum value memory setting time (95% time) 0/4-20 ma analog output Settings can be carried out using a laptop / PC with the aid of a software and a RS 485 interface adapter. The software runs under Windows. The user guidance system is multilingual and largely selfexplanatory. Besides parameterization, the software also offers the opportunity to evaluate and keep records of the measurement data. An extensive accessories programme rounds off the product range and permits the adaptation to different applications.

Piros Pyrometer Type overview Q series Pyrometer of the OKS Q series for temperature measurement of metals are available in different versions. The ratio pyrometers allow accurate measurements even on metal objects with changing surface properties and different emissivity. The pyrometer OKS L Q18.194 S10 enables precise temperature measurement even if the measuring spot is covered by 10%. It is especially suitable for objects with varying position, e.g. pouring cast steel. All devices are equipped with a plug connection. Separate connection cables are available in different lengths. Advantages of the Q series temperature measurement independent of emissivity short response times high accuracy BUS solution with up to 32 devices spectral range 0,7-1,1 µm Different optics ensure the optimal adjustment of the measuring spot to the object size. The table below shows the size of the measuring spot in relation to the object distance. Aperture M=3,5 mm M=11,2 mm Type overview Example: OKS 3 Q25.194 S10 OKS 2 (focus point at a = 290 mm measuring distance) measuring distance a [mm] 0 100 200 290 400 500 600 art.-no. type measuring range measuring point diameter M [mm] 6924A OKS 2 Q14.194 S10 600 C up to 1400 C 11,8 9,8 7,8 6,0 13 19 25 6924D OKS 2 Q18.194 S10 700 C up to 1800 C 11,8 8,8 5,7 3,0 8,6 14 19 6924G OKS 2 Q25.194 S10 800 C up to 2500 C 11,8 8,2 4,7 1,5 6,5 11,1 15,7 OKS 3 (focus point at a = 650 mm measuring distance) measuring distance a [mm] 0 200 400 650 800 1000 1500 art.-no. type measuring range measuring point diameter M [mm] 6924B OKS 3 Q14.194 S10 600 C up to 1400 C 10,8 11,5 12,2 13 18,5 26 44 6924E OKS 3 Q18.194 S10 700 C up to 1800 C 10,8 9,2 8,2 6,5 10,5 16 29 6924H OKS 3 Q25.194 S10 800 C up to 2500 C 10,8 8,6 6,3 3,5 6,8 11,2 22 OKS 4 (focus point at a = 1500 mm measuring distance) measuring distance a [mm] 0 500 750 1000 1250 1500 2000 art.-no. type measuring range measuring point diameter M [mm] 6924C OKS 4 Q14.194 S10 600 C up to 1400 C 10,4 17 20 24 27 30 43 6924F OKS 4 Q18.194 S10 700 C up to 1800 C 10,4 11,9 12,7 13,5 14,2 15 24 6924I OKS 4 Q25.194 S10 800 C up to 2500 C 10,4 9,4 8,9 8,5 8,0 7,5 13,5 OKS L (ratio pyrometer with fiber optic cable) measuring distance a [mm] 0 100 300 800 1000 2000 3000 4000 art.-no. type measuring range measuring point diameter M [mm] *) 6920Z OKS L Q18.194 S10 700 C up to 1800 C 5,0 6,5 10,4 22,2 27,5 55,0 83,0 111,0 *) 10% covering is sufficient for a precise measurement

Piros S Pyrometer Q series Piros OKS accessories accessory description type art.-no. connection cable 2 m * ) ST S10/12-2 9847H connection cable 5 m * ) ST S10/12-5 9847D interface converter RS 485 to USB SIC 485 UD 9861E mounting bracket adjustable DAK 305 6913E mounting bracket fixed DAK 304 6913D air purge unit DAK 303 6913C cooling jacket with air purge DAK 302 6913B cable protection cape DAK 329 6913X protection tube 100 mm lengths DAK 319 6913L protection tube 300 mm lengths DAK 320 6913M vaccum flange DAK 322 6913O *) Further cable lengths on request Furthermore we offer suitable protective cable hoses for the Pyrometer with cooling jacket. Accessories for ratio pyrometer OKS L Q18 on request. Proven applications for Proxitron Pyrometer are for example: temperature monitoring at presses object temperature in furnaces preheating hardening soldering rolling furnace construction research and development monitoring of swaying cast steel Other Pyrometer versions are available for special applications. Please let us know your requirements. We will be pleased to advise you! Proxitron GmbH. Gärtnerstraße 10. 25335 Elmshorn. Germany Phone +49 4121 2621-0. Fax +49 4121 2621-10. info@proxitron.de. www.proxitron.com P61e 0717

Non-contact temperature measurement Steel - glass - paper - plastics - ceramics Piros S Infrared Pyrometer -40 C - 2500 C

Piros Infrared Pyrometer General information Piros pyrometers are non-contact measuring thermometers with analog outputs. They complement the Piros infrared sensor range with switching performance in the OSA/OKA/OKB range, which have been tried and tested for years. For temperature measurement we have the stationary design OKS in the Piros S range available in various types with measurement ranges between -40 and +2500 C. The sensors have been designed for control and monitoring tasks in many varied industries: steel works and rolling mills forging works presses soldering, sintering and hardening works glass industry food industry paper industry We recommend the use of our questionnaire for application analysis so that the user does not necessarily need to cope with the theory of radiation measurement. The following criteria are relevant for selection of the correct sensor: size and condition of the object minimum/maximum object temperature distance from sensor measurement range Various optical systems ensure optimum adaptation of the measured area to the object size. Please see the type summary for a list of measured area size in relationship to object distance. Highlight overview Stainless steel housing with M40 thread Plug connection with M9 thread Temperature range: -40 to 1000 C, for all materials 100 to 1300 C, for glass 250 to 2500 C, for metal 300 to 1300 C for measurment through fl ames (e.g. in furnaces) Electrical connection: 24 V DC as current loop with 4-20 ma measuring signal. Integrated USB interface (galvanically isolated) for parameterisation or measuring data transmission with PC software or hand-held parameterisation device. Technical data: Response time from 10 ms Measuring areas from 1,5 mm diameter Measuring failure from 0,5% Emissivity adjustable With integrated laser pilot light and maximum value memory depending on model. Acessory: Mounting bracket Colling jacket Air purge unit Laser - Pilot light attachment Monitoring und parameterisa tion software and USB cable hand-held parameterisation device Connection cable in different lengths Software and hand-held programming device The integrated service interface enables display and adaptation of the following parameters: Temperature display C / F Measuring range settings Emissivity Maximum value memory Response time t95 Settings can be carried out using a laptop or PC with the aid of the optional software and the USB interface cable provided. The software runs under Windows. The temperature display can be shown as C or F. The user guidance system is multi-lingual and entirely intuitive. The software offers beside the possibility of the parameterisation also the recording and evaluation of the measuring data. Stand-alone operation: If the OKS series device is connected via USB to a PC no further power supply is required for operation of the device. The hand-held parameterisation device allows temperature display on site at any time in addition to changes to all device parameters without PC or software. Proxitron GmbH - Gärtnerstr. 10 - D-25335 Elmshorn - Tel. 04121/2621-0 - Fax. 04121/2621-10 - mail@proxitron.de

Piros Infrared Pyrometer Type summary Pyrometer of the series OKS are available for different applications in different versions. Various optics allow an adaptation to object size and distance. All devices are provided with plug connection. Separate connecting cables are available in different length. Measuring range Spectral range Measuring spot / distance Type Art.-No. 2,5 / 100 mm OKS 5 TG13.14 S9 6920Q Glass 100-1300 C 5,14 µm 6 / 300 mm OKS 6 TG13.14 S9 6920R 16 / 800 mm OKS 7 TG13.14 S9 6920S 24 / 1200 mm OKS 8 TG13.14 S9 6920T Measurement through fl ames 300-1300 C 3,9 µm 2,5 / 100 mm OKS 5 TF13.14 S9 6920U 6 / 300 mm OKS 6 TF13.14 S9 6920V 16 / 800 mm OKS 7 TF13.14 S9 6920W 24 / 1200 mm OKS 8 TF13.14 S9 6920X 250-1300 C 3 / 290 mm OKS 2 GA13.14 S9 6920D 6,5 / 650 mm OKS 3 GA13.14 S9 6920A Application Metal 350-1800 C 1,5 µm... 1,8 µm 40 / 4000 mm OKS 4 GA13.14 S9 6920E 1,5 / 290 mm OKS 2 GA18.14 S9 6920F 3,5 / 650 mm OKS 3 GA18.14 S9 6920G 20 / 4000 mm OKS 4 GA18.14 S9 6920H 3 / 290 mm OKS 2 S18.14 S9 6920I 600-1800 C 6,5 / 650 mm OKS 3 S18.14 S9 6920J 0,8 µm... 1,1 µm 40 / 4000 mm OKS 4 S18.14 S9 6920C 1,5 / 290 mm OKS 2 S25.14 S9 6920K 800-2500 C 3,5 / 650 mm OKS 3 S25.14 S9 6920L 20 / 4000 mm OKS 4 S25.14 S9 6920M 2 / 100 mm OKS 5 T10.14 S9 6920N Universal -40-1000 C 8 µm... 14 µm 6 / 300 mm OKS 6 T10.14 S9 6920O 16 / 800 mm OKS 7 T10.14 S9 6920B 36 / 2000 mm OKS 8 T10.14 S9 6920P Proxitron GmbH - Gärtnerstr. 10 - D-25335 Elmshorn - Tel. 04121/2621-0 - Fax. 04121/2621-10 - mail@proxitron.de

Piros S Infrared Pyrometer Piros OKS accessories A wide selection of accessories rounds off our product range, and allows adaptation to many different application conditions. Applications Temperature measurement of glass surfaces Material monitoring in presses Material detection for the paper or plastics industries Temperature monitoring for food industry Accessory Type Art.-No. Mounting bracket adjustable DAK 305 6913E Mounting bracket DAK 304 6913D Air purge attachment DAK 303 6913C Cooling jacket with air purge DAK 302 6913B Laser pilot light unit DAK 308 6913G Protection tube 100 mm lengths DAK 319 6913L Protection tube 300 mm lengths DAK 320 6913M Vacuum fl ange DAK 322 6913O Cable protection cape DAK 329 6913X Protection tube adapter DAK 330 6913Y Parameterisation device DAK 318 6913J USB interface cable and software DAK 317 6913I Connection cable 2 m ST S9/5-2 9847B Connection cable 5 m ST S9/5-5 9847A Other lengths on request Monitoring of object temperatures in furnaces or behind gas flames. Heating and air-conditioning Electrical equipment, electronics Automobile diagnostics Road construction Chemical industry Furnace construction Research and development Other pyrometer designs are available for special applications. Please, tell us your requirements. We will be pleased to advise you. P47e 1114