P9 P97 P97 Description is a service pole range for all types of. Service poles are made of natural anodized aluminium with a high surface fi nish. They are installed free-standing in the room, mounted on a foot and movable within a radius of up to. metres from the connection point in the ceiling, or tension-mounted between fl oor and ceiling. Both types are available in one and two-sided versions or with one or two installation boxes for. The poles have a front opening of 70 mm, allowing x module and modular devices to be installed by means of one, two or three-module adaptors. The one and two-sided poles can also take the one-module adaptor for c/c 0 mm. Application The poles provide fl exible solutions for offi ces, bringing power, telecom and data directly from the ceiling to the desk. Benefits Stable and robust design. Softly rounded and slender form. Well-rounded stop ends protect cables from sharp edges. Cable partition profi le for correct spacing between VDI and power cables. Free-standing poles have steady feet. The rectangular foot allows poles to be installed back-to-back or against a wall. Free-standing poles have a play radius of. m from the connection point in the ceiling. Slots on both sides of the pole allow easy mounting of accessories. Also for decorative stripes in three colours. Tool-less, fast and space-saving height adjustment for tension mounted poles. Technical and Material data Aluminium, extruded Specifi cation EN-AW-0 Density.7 g/cm Linear expansion.x0 / C Surface treatment Natural anodzing Aluminium, die cast Density.7 g/cm Linear expansion.x0 / C Surface treatment Powder coating Colours Grey RAL 9007 RAL 900 Cast iron Density 7. g/cm Linear expansion.x0 / C Surface treatment Coated with clear varnish Zinc Density 7. g/cm Linear expansion.7x0 / C Surface treatment Untreated PC/ABS Density. g/cm Linear expansion 70x0 / C Volume resistivity >0 Ω cm Water absorption 0.% Dielectric strength 9 kv/mm UL 9 HB Colours RAL 900 Aluminium metallic (painted) (unspecifi ed) PS (Polystyrene) Density.0 g/cm Colour RAL 900 Other info Halogen-free ABS Density.07 g/cm Linear expansion 00x0 / C Volume resistivity >0 Ω cm Water absorption 0.% UL 9 HB Colour (unspecifi ed) PBT with 0% glass- Density. g/cm fi bre Linear expansion 0-70x0 / C UL 9 HB (. mm) Colour Light grey (8)
Exploded views P9 Poles. Base profi le. Partition profi le. Front cover. Installation box. Floor fixing. Stop end 7. Strain relief 8. Flexible conduit with adaptor P9 P97 Free-standing pole Tension-mounted pole 9 0 8 7 7 7 7 9 P9 P9 Free-standing pole with installation box 0 9 9. Ceiling frame 0. Ceiling fi xing. Cable tray fi xing. Adjustabe ceiling fi xing. Cast iron foot. Floor fi xing plate. Busbar fi xing. Earthing kit 7. Adaptor with front plate 8. Cover Tension-mounted pole with installation box 7 8 8 8 b 7 7 9 Technical and Material data, cont. PC+ASA Density. g/cm Linear expansion 80x0 / C Water absorption 0.% Volume resistivity >0 Ω cm Dielectric strength 7 kv/mm UL 9 HB Colours RAL 900 Aluminium metallic (painted) Steel Specifi cation SS Density 7.8 g/cm Linear expansion.x0 / C Surface treatment Powder coating Colour RAL 900 PVC Density. g/cm Linear expansion 0x0 / C Volume resistivity >0 Ω cm Water absorption <0.% UL 9 V0 (0.8 mm) Colour Grey RAL 700 Degree of protection IP0 Temperature range Operating temperature from - C to +0 C Standards and certifi cates The products comply with the standards: SS 0 IEC 08-- The products satisfy the provisions for CE marking according to the Low Voltage Directive 7//EEC and 9/8/EEC Mounting instructions Mounting instructions are enclosed with the product. They are also available on Pl@net. Art.No. 007 / 0077 Free-standing pole, one and two-sided Art.No. 007 / 007 Tension-mounted pole, one and two-sided Art.No. 007 / 0079 Free-standing pole with installation box Art.No. 007 / 0078 Tension-mounted pole with installation box Product Environmental Profile Product Environmental Profi le documents are available on Pl@net. Package info Package information is included in the Prodat fi le, which is available on Yepnet. Package information can also be obtained from the responsible factory. Cable capacity Compartment Max. Ø mm One-sided pole 8 Two-sided pole 8 Pole with one box 9 0 Cross section area mm 8 90 07 97 980 7 900 998 8 0 Cable capacity*) mm 0% 0% 0% 7 88 7 99 88 0 90 99 70 70 98 709 0 8 90 7 0 88 8 9 0 8 70 988 88 0 799 09 9 P99 P99 P99 P997 P998 P999 P99 Pole with two boxes a Floor feeding system. Floor fi xing with slot for aluminium fl oor feeder. Floor fi xing with slot for PVC fl oor feeder. Gasket ring. Floor feeder, aluminium (base profi le and cover). Floor feeder, PVC a. Base profile b. Cover. Floor feeder jointing piece 7. Corner feeder piece 7 0 9 88 80 9 88 0 9 0 07 *) We recommend a 0% utilization of the cable capacity. 7 0 8 9 P99 P99 (8)
Design and dimensions P908 P99 Tension-mounted poles, one-sided and two-sided P9909 P9 Free-standing poles, one-sided and two-sided P9907 P9 P990 Tension-mounted poles, one/two-sided A Total height, mm Min. 70 Max. 70 Min. 70 Max. 70 Min. 70 Max. 70 Min. 70 Max. 70 B Height without ceiling fixing, mm 070 070 070 070 Free-standing poles, one/two-sided A Total height of pole, mm One-sided 8 000 Two-sided 0 000 C Length of flex. conduit, mm P90 Tension-mounted poles, one and two boxes P99 Free-standing poles, one and two boxes Tension-mounted poles, one/two boxes A Total height, mm B Height without ceiling fixing, mm D Height of box from floor, mm Min. 000 80 0 Max. 00 Min. 00 0 0 Max. 800 Min. 800 0 0 Max. 00 Min. 00 Max. 00 90 0 Free-standing poles, one/two boxes A Total height of pole, mm C Length of flex. conduit, mm 000 80 D Height of box from floor, mm (8)
Service poles P99 Pole, tension-mounted Empty service pole for tension mounting between fl oor and ceiling, one-sided or two-sided. Including front cover, ceiling fi xing, ceiling frame, stop end, strain relief, fl oor fi xing, fl oor fi xing plate (zinc), earthing kit and mounting instruction. Adjustability of ceiling fi xing 00 mm. Wiring devices can be placed along the whole pole length, using one, two or three-module adaptors for x, two or three-module adaptors for modular devices or one-module adaptor for c/c 0 mm. Unearthed. Supplied without and cables. One-sided,.7-.7 m Anodized 70-70//0 0800997 0087 ISM000 One-sided,.7-.7 m Anodized 70-70//0 0800998 0087 ISM00 One-sided,.7-.7 m Anodized 70-70//0 08009998 0087 ISM00 One-sided,.7-.7 m Anodized 70-70//0 08000000 0087 ISM00 P99 Two-sided,.7--7 m Anodized 70-70/0/8 0800007 00877 ISM00 Two-sided,.7-.7 m Anodized 70-70/0/8 080000 0087 ISM00 Two-sided,.7-.7 m Anodized 70-70/0/8 080000 00878 ISM007 Two-sided,.7-.7 m Anodized 70-70/0/8 0800008 0087 ISM008 P99 Pole, free-standing Empty, free-standing and movable service pole, one-sided or two-sided. Including front cover, fl exible conduit with adaptor, strain relief, earthing kit and mounting instruction. Length of fl exible conduit.0 m, play radius. m from the connection point in the ceiling. Wiring devices can be placed along the whole pole length, using one, two or three-module adaptors for x wiring devices, two or three-module adaptors for modular devices or one-module adaptor for c/c 0 mm. Unearthed. Supplied without and cables. Foot to be ordered separately. One-sided Anodized 8+000//0 080000 00880 ISM00 P99 Two-sided Anodized 0+000/0/8 080007 00879 ISM0 P997 Pole with installation box, tension-mounted Empty service pole for tension mounting between fl oor and ceiling, provided with one or two installation boxes for. Including ceiling fi xing, ceiling frame, stop end, fl oor fi xing, fl oor fi xing plate (zinc), earthing kit and mounting instruction. Adjustability of ceiling fi xing 00 mm. Wiring devices are placed in the installation boxes, with an accessible front opening of 0 mm (= x two-module adaptors for x and modular devices). Unearthed. Supplied without and cables. With one box,.0-. m Anodized 000-00/90/00 080000 00887 ISM00 With one box,.-.8 m Anodized 00-800/90/00 080000 0088 ISM0 With one box,.8-. m Anodized 800-00/90/00 08000079 0088 ISM0 With one box,.-. m Anodized 00-00/90/00 0800008 0088 ISM0 P999 With two boxes,.0-. m With two boxes,.-.8 m With two boxes,.8-. m With two boxes,.-. m Anodized 000-00/9/0 0800009 0088 ISM0 Anodized 00-800/9/0 0800009 0088 ISM0 Anodized 800-00/9/0 08000 0088 ISM07 Anodized 00-00/9/0 08000 00888 ISM08 (8)
Service poles P99 Pole with installation box, free-standing Empty, free-standing and movable service pole, provided with one or two installation boxes for. Including fl exible conduit with adaptor, earthing kit and mounting instruction. Length of fl exible conduit.0 m, play radius. m from the connection point in the ceiling. Wiring devices are placed in the installation boxes, with an accessible front opening of 0 mm (= x twomodule adaptors for x and modular devices). Unearthed. Supplied without and cables. Foot to be ordered separately. With one box Anodized +000/90/00 08000 00889 ISM0 P997 With two boxes Anodized +000/9/0 08000 00890 ISM0 Pole, customer adapted Service pole according to special customer order. The pole is available one- or two-sided or with one or two installation boxes, for tension mounting or free-standing, see above. It can be specifi ed in optional length and colour. Implies a detailed specifi cation. Material: Aluminium. Acc. to customer spec. Optional Optional/ */ * 00979 ISMSPPL Accessories for service poles Foot for free-standing poles P88 *Various measurements, see above Rectangular foot for free-standing, movable poles, to be fi xed to the bottom plate of the pole by means of two M bolts (included). The foot is provided with a steel clamp that can be unfolded for extra support. When not in use, the clamp lies protected in a recess underneath the foot. Specially suited in applications close to the wall or when two poles are positioned back to back. Material: Cast iron, painted. Foot, rectangular Grey /0/ 0800098 00 ISM0809 P89 Round foot for free-standing, movable poles, to be fi xed to the bottom plate of the pole by means of two M bolts (included). Suitable both for one and two-sided poles. Material: Cast iron, painted. Foot, round Grey 9/Ø7 080008 007 ISM0808 P98 P98 Floor fixing for tension-mounted poles, with slot for floor feeder Floor fi xing for tension-mounted poles, one or two-sided. Fixed to the fl oor by screws. With slot for connection of fl oor feeder 8x7 or 8x9 mm. Gasket ring included. Material: Aluminium, powder coated. For one-sided pole and Grey /00/ 08000 0000 ISM00 8x9 mm aluminium RAL 9007 fl oor feeder For two-sided pole and 8x9 mm aluminium fl oor feeder Grey RAL 9007 // 080009 0000 ISM0 P98 For one-sided pole and 8x7 mm PVC fl oor feeder Grey RAL 9007 /00/ 080007 0000 ISM0 P9 For two-sided pole and 8x7 mm PVC fl oor feeder Grey RAL 9007 // 080008 0000 ISM0 P979 Ceiling frame Ceiling frame for one-sided or two-sided poles or for Ø mm profi le. Covers the edge of the hole in a false ceiling. Self-sticking. Material: PS (polystyrene). Ceiling frame for -sided //70 0800078 0099 ISM00 pole RAL 900 P978 Ceiling frame for -sided pole RAL 900 /70/7 080008 00997 ISM0 P98 Ceiling frame for Ø mm pole RAL 900 /Ø 080009 00998 ISM0 (8)
Accessories for service poles P87 P8 P977 P907 P8 Ceiling frame Ceiling frame intended to lead fl exible conduit through false ceiling. To be mounted in circular hole, Ø mm, by using three included clamps. Also including a slotted plastic plate to be used to lock the fl exible conduit, which is fi xed by cable ties. The plate can also be used as a drill template for entrance hole Ø mm. Ceiling frame 89/Ø 080008 000 ISM08 RAL 900 Ceiling fixing Ceiling fi xing intended to connect fl exible conduit to ceiling or wall. Fixings not included. Material: Aluminium, powder coated. Ceiling fi xing 0//90 08000 000 ISM08 RAL 900 Cable tray fixing Cable tray fi xing including fi xing material, intended to connect one and two-sided service poles to cable tray or cable ladder. Allows a flexible connection of the pole in various directions. Material: Steel, powder coated. Cable tray fi xing, one or 7/7/ 0800008 00999 ISM0 two-sided pole RAL 900 Cable tray fi xing including fi xing material, intended to connect a Ø mm service pole to cable tray or cable ladder. Allows a fl exible connection of the pole in various directions. Material: Steel, powder coated. Cable tray fi xing, Ø mm pole RAL 900 7/Ø7 08000 00000 ISM0 Cable tray fi xing including fi xing material, intended to connect fl exible conduit to cable tray. Material: Steel, powder coated. Cable tray fi xing RAL 900 00//70 08000 0097 ISM08 P90 Busbar fixing Busbar fi xing for Ø mm conduits, intended to connect fl exible conduit to busbar trunking. Material: Steel, powder coated. Busbar fi xing 0/90/70 080009 009 ISM08 RAL 900 P98 Front cover Front cover to be snapped into 70 mm front openings. With earthing slots. Supplied with protective foil, in lengths of m. Front cover Anodized 000//7 m 080099 009 ISM90 P9 Partition profile Partition profi le of halogen-free material with two partition walls. Mounted in internal fi xing rails of one and two-sided poles, for the separation of power and low voltage cables. Material: ABS. Partition profi le 00/9/0 0 08000 0000 ISM0 P9 Modular device adaptor, two-module, Unica Adaptor, two-module, for modular devices like for instance miniature circuit breakers. With transparent grey cover. Material: PC/ABS (front plate), PBT (adaptor), PC+ASA (DIN-module), metal rail. For - modular devices RAL 900 7/80/0 080098 0007 ISM000 P9 For - modular devices Alu metallic 7/80/0 0800970 0099 ISM00 Modular device adaptor, three-module, Alira Adaptor, three-module, for modular devices like for instance miniature circuit breakers. With transparent grey cover. P97 For - modular devices RAL 900 7/9/8 08009 00 ISM00 P980 For - modular devices Alu metallic 7/9/8 08009 00078 ISM00 (8)
Accessories for service poles P9 Adaptor for x module, Unica Adaptor including front plate. Suitable for x module, type Unica. Terminal blocks and earth terminals can be snap-fi tted in the two-module and three-module sizes. To be combined with installation box in applications requiring strain relief of cables or extra insulation. To avoid gaps between the adaptors can be snapped into one another. Material: PC/ABS (front plate), PBT (adaptor). For one x module 7/8/7 0800909 009 ISM00 wiring device RAL 900 P99 For one x module wiring device Alu metallic 7/8/7 080090 0099 ISM0 P997 For two x module RAL 900 7/8/0 08009 0097 ISM0 P99 For two x module Alu metallic 7/8/0 080097 0090 ISM0 P998 For three x module RAL 900 7/8/8 08009 0098 ISM0 P99 For three x module Alu metallic 7/8/8 08009 009 ISM07 P990 Adaptor for x module, Altira Adaptor including front plate. Suitable for x module, type Altira and similar. Terminal blocks and earth terminals can be snap-fi tted in the two-module and three-module sizes. To be combined with installation box in applications requiring strain relief of cables or extra insulation. Altira front plate for wall applications can be snap-fi tted in the adaptor. To avoid gaps between the adaptors can be snapped into one another. For one x module 7//7 080097 00 ISM00 wiring device RAL 900 P99 For two x module RAL 900 7//0 08009 007 ISM0 P99 For three x module RAL 900 7//8 08009 008 ISM0 P989 P99 P99 Adaptor for c/c 0 Adaptor including two screws. Suitable for one c/c 0 mm wiring device. With screw options in four different directions, securing the correct orientation in both vertical and horizontal mounting. To be combined with installation box in applications requiring strain relief of cables or extra insulation. In order to avoid gaps between and to secure c/c 7 mm between the outlets, thus allowing front plates from wall applications to be used, the adaptors can be snapped into one another. Only to be used in one and two-sided poles (without installation boxes). Adaptor, c/c 0 7//7 080099 00 ISM00 Installation box for adaptors Installation box to be snap-mounted to an adaptor. The box has a built-in screwless strain relief and an interface that allows snapfi tting of terminal blocks and earth terminals, as well as cable-tie strain relieving. Slots in the box allow pre-wired to slide in. Box for one-module 7//7 0800987 00 ISM00 Altira/Unica adaptor or c/ c 0 mm wiring device adaptor Box for two-module 7//0 080099 0080 ISM0 Altira/Unica adaptor P99 Box for three-module Altira/Unica adaptor 7//8 0800900 008 ISM0 7 (8)
Accessories for service poles P879 Decorative stripe Decorative stripe to be fi tted in the slots along the sides of one and two-sided poles and posts. Supplied in lengths of m. Material: Silicone rubber. Decorative stripe Grey 000/Ø. m 0800077 000 ISM08 P879 Decorative stripe RAL 900 000/Ø. m 080007 0007 ISM08 P879 Decorative stripe Orange 000/Ø. m 080007 0009 ISM08 P879 Earthing clamp Earthing clamp to be used for bonding of front cover, base profi le and accessories to earth. Material: Steel. Earthing clamp 9/9/9 0 080080 008 ISM09 P879 Earthing kit Kit including earth wire with fl at pin connectors and earthing clamps. To be used to connect the front cover to the base profi le. Earthing kit Yellow/green L = 00 L = 00 Floor feeder and accessories Floor feeder, aluminium P98 0 0 080089 08008 009 009 ISM09 ISM09 Floor feeder made up by a three compartment base profi le and cover, supplied in lengths of. m. The base profi le has punched holes to simplify mounting. Provided with screw slots for earth connection. Can be used as a separate item or in combination with a service pole with slotted fl oor fi xing for aluminium fl oor feeder. Meets load requirements according to VDE 0 (70 N/0 mm ). Floor feeder Anodized 8/9/00 0800090 0000 ISM00 P8 P8 P99 P8 Floor feeder, PVC Floor feeder made up by a base part with three compartments and a cover. Supplied in lengths of m. To be used for feeding along the fl oor to a service pole provided with a slotted fl oor fi xing for 8x7 mm floor feeder. Material: PVC. Floor feeder Grey 8/7/000 8 m 080007 00 ISM087 RAL 700 Floor feeder made up by a base part with three compartments and a cover. Supplied in lengths of m. To be used for feeding along the fl oor to a service pole provided with a slotted fl oor fi xing for 8x7 mm floor feeder. Floor feeder Anodized 8/7/000 8 m 08007 0089 ISM087 Floor feeder jointing piece Floor feeder jointing piece to cover joints between PVC fl oor feeder sections. Material: PVC. Jointing piece Grey 0/0/78 0 0800080 00 ISM088 RAL 700 Corner feeder piece Corner feeder piece to be used in 90 degree corners between PVC fl oor feeder sections. Material: PVC. Corner feeder Grey 0/0/0 0 0800097 000 ISM089 piece RAL 700 8 (8)