Specification. Non-Ferrous.

Similar documents
EUROPEAN STEEL SCRAP SPECIFICATION. General Conditions applicable to all grades

EUROPEAN STEEL SCRAP SPECIFICATION

WHEN WASTE CEASES TO BE WASTE. The Case of Ferrous Scrap

COUNCIL REGULATION (EU)

Procedia Environmental Science, Engineering and Management

Aluminum Siding - includes aluminum siding (free of insulation), downspouts, gutters, trimming, and empty wire conduit.

Aluminum Siding - includes aluminum siding (free of insulation), downspouts, gutters, trimming, and empty wire conduit.

Examples of the ferrous metals: Vehicle scrap metal Demolition Site scrap metal Metal off cuts from manufacturing industries

WORKING DOCUMENT EN EN EN

L 201/14 Official Journal of the European Union

Lecture 13 End of Life Vehicles

ArcelorMittal Dofasco Scrap Specifications and Requirements

1408 Act LAWS OF PENNSYLVANIA. No AN ACT

EPUB / LOW TEMPERATURE MELT METAL ALLOYS EBOOK

Metals. General information

Nonferrous Metals and Alloys: Production, General Properties, and Applications

Copper South China(Nanhai)

National Standards of the People s Republic of China

General Office of Ministry of Environmental Protection of the People s Republic of China

Engineering Materials

Technology Education Grade 7 Review Packet #2-3D Printing, Plastics & Metallurgy D Printing

INDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION

9.9 % 1,858.6 billion billion 2.4 % 89.1 billion. 1.4 times billion. KOBELCO at a Glance Fiscal Net sales +11.2% +8.

Determining the Coefficient of Friction. Part by by Ron Kurtus

STOCK LIST COQUITLAM, BC, CANADA SHEET PLATE COIL PIPE TUBE ROD BAR FITTINGS FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL

NATIONAL CERTIFICATE (VOCATIONAL) NQF LEVEL 3 NOVEMBER

OKLAHOMA DEPARTMENT OF TRANSPORTATION SPECIAL PROVISIONS FOR BUY AMERICA

h Reclamation Center Lot Number List

IRON, STEEL AND ALUMINIUM PRODUCTS

WHAT IS THE ACTUAL COST OF YOUR COMMERCIAL WATER HEATER? LOOKING BEYOND EFFICIENCY INCREASING ROI THROUGH WATER HEATER MATERIAL SELECTION

1. METALS 2. FERRIC METALS 3. NON-FERRIC METALS 4. WORKING WITH METALS 5. METAL FORMING TECHNIQUES 6. ENVIRONMENTAL IMPACT OF METAL EXTRACTION

List of SNI Mandatory Sodium tripolyphosphate ( STPP ) technical quality. Safety of toys - Part 3 : Migration of certain elements

Creating a Recycling Infrastructure for ELVs in India. Richard Paul Environmental Management Consultant Society of Automotive Engineers USA

Variation notice with introductory note

Alexey Alipchenko, Trimet Group, Russia. The aluminum alloys industry in Russia: the situation today and post WTO entry.

WELDING Topic and Contents Hours Marks

To maximise recyclability and ensure the consistency in aluminium products recovered from suppliers, this specification aims to:

FERROUS RAW MATERIALS MANUAL

1-Materials Science & Materials Engineering

Guideline For Waste Treatment/Recycling By Businesses

Recycling Passport. Device: Pump X-am 125 Mark II Issued: Producer information. 2. Product identification.

Topic 9 National 4 Chemistry Summary Notes. Metals and Alloys. Materials

Presentation Outline

HIGH-SPEED REINFORCED CUT-OFF WHEELS

Oman College of Management & Technology COURSE NAME: MATERIALS SCIENCE PROPOSED BY: DR.MOHAMED ALNEJEM SEMESTER: SECOND 2015/2016 CHAPTER (7): METALS

DESCRIPTION OF RECYCLING AND REUSE BUSINESS CATEGORIES

Metropolitan Water Reclamation District of Greater Chicago 10/19/ Mark Joyce Senior Mechanical Engineer Engineering Department

PESIT Bangalore South Campus Hosur road, 1km before ElectronicCity, Bengaluru -100 Department of Basic Science and Humanities

Engineering Materials

Nickel Based Superalloy Incoloy 800 (UNS N08800)

ITEM 442 METALS FOR STRUCTURES

Copper and Brass Alloys

أت ارش. Dr. Abdel-Wahab El-Morsy Faculty of Engineering - Rabigh

Investment Recovery Association

Industrial Storm Water Inspections Implementation

List of dangerous and non-dangerous wastes which can be received and treated at Hydrometal

INDEX. page Stone 4 Steel 5 Super Thin 6 Stainless Steel 7 High Speed Steel 8 High Speed Stone 8 Rail Track 8 Aluminium 9 Air Tool 9

Technology Education Grade 7 Review Packet #2-3D Printing, Plastics & Metallurgy D Printing

Material Selection Jacob Klinginsmith, Russ Glass Naomi Sanders, Becky Moffitt

SECTION METAL STAIRS

- RUSTKLEEN. Characteristics Test Method Unit RUSTKLEEN

Current Status of Implementation and Future Perspectives of the Guidelines for Waste Treatment and Recycling by Commodity and Business.

Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology 1

Material and Process. Specification

NONFERROUS METALS AND ALLOYS

Why wait until catastrophe strikes? Prevent the Chain Reaction of Equipment Wear, Maximize Heat Transfer, Protect Equipment Life

Name: Last First Middle. Residence: Street/P.O. Box City State Zip Code. Name of Business: Registered Address of Business:

Materials can be split into 5 main categories; Woods, Plastics, metals, composites and smart materials.

SAMPLE PAGES PAGES. Extraction of metals from metal oxides. mixture of iron sand and coal are heated as they move down kiln, by force of gravity

MATERIAL DECLARATION SHEET

ASTM and the Metals Industry Long-Term Partners for Success

Application and importance of copper and copper powder on powder metallurgy field

FACTFILE: GCE TECHNOLOGY & DESIGN

PARTICLE SORTING OF LIGHT-METAL ALLOYS AND EXPANDED USE OF MANUFACTURING SCRAP IN AUTOMOTIVE, MARINE AND AEROSPACE MARKETS

End of Life Plan. Kodak Scan Station 700 Series. Network Scanners

Kingdom of Cambodia Nation Religion King

SECTION HYDRONIC PIPING

X-MET8000. Sort scrap metal fast and maximise profits with Oxford Instruments latest handheld XRF analyser. Maximise productivity and profits with:

Manual Material Thickness Meter PCE-TG1XX

Product list PRODUCT CATEGORIES ACCEPTED AT THE EVENT

FACT SHEET. Introduction

Activities Conditions Incentives

Welcome. Regulatory Developments in China (January June 2018) Presented by Amy Chen (Pei Yu Chen) Regulatory Compliance Specialist

GROUNDING SPECIFICATIONS FOR thermoweld EXOTHERMIC WELDING SYSTEM

Copper and its Alloys. Haseeb Ullah Khan Jatoi Department of Chemical Engineering UET Lahore

Materials Engineering PTT 110

Material : Steel Scrap Grade : All SDI Part # N/A

N OTHING IS M ORE IM PORTA NT THA N THE ENVIRONM ENT A ROUND US. WE A RE A LL A WA RE OF THE DA NGERS OF EX HA USTING OUR NA TURA L

Getting Started with Welding

Aluminum Filler Metals

COMPLETE ONLY ONE OF THE RECYCLING REPORT FORMS! HOW TO DECIDE WHICH REPORT TO SUBMIT:

Science and Health CLASSIFYING MATERIALS INTO CONDUCTORS AND INSULATORS

SECTION HYDRONIC PIPING

Metals Ferrous and Non - Ferrous Icons key:

We have a good understanding of the markets we operate in; we understand the products and production processes, we understand the needs of the

China Copper Industry Chain Analysis,

Soundmaster & Modernfold TECHNICAL DATA

CLEANING OF ALUMINIUM

SECTION WELDED STEEL PICKET FENCE. 1. Fusion welded and rackable ornamental steel picket fence system.

Copyright by ATM Recyclingsystems GmbH Page 1 of 5. Post-consumer scrap (Old scrap) Nomenclature. Copper scrap in large pieces

Transcription:

Specification. Non-Ferrous.

2

In the Recycling Business since 1888. RIMECO is a 5th generation, family owned company with a solid history of innovation and expertise. As a reliable and flexible partner, we provide our customers with quality products and individual, quick service, 24/7. At RIMECO, we are committed to walking the talk and to maintaining our position as a global market player. More than 130 years of experience has given us a deep knowledge of the market and an extensive network, which we make available to you - for your benefit. Besides trading quality raw materials, we plan, handle and execute large and small recycling projects solo or in partnerships. In any case, we promise you best-in-class products, clear communication, personal engagement, and goods delivered on time. Our head office is located in Aabenraa, Denmark, with several facilities in Scandinavian. We work with the most experienced and skilled partners that meet our high standards. Take a look at our products and services to see what we can do for you. 3

Aluminum Arisings Aluminum : Al Extrusions Plate Sheet Cast Beverage Cans Wheels Foil Clip Fence Gates Alloy 6061, 6063, 5052 4

Brass Arisings Brass : MS Red Brass Yellow Brass Automobile Radiators Hard Brass Castings Ornaments & Valves Rod Brass Aluminum Brass Recycling 5

Copper Arisings Copper / Brass : Cu Wire Pipes & Tubes Electrical Wire Sheet Copper Misc. Household Copper Plumbing Pipe Plate or bars Fittings Insulated wire Decorative items 6

Cables Cables : CuFe There are a range of different cable types out there, including (but not limited to): Household cables Tinned copper cable ACSR aluminum cable Data cable Coax cable Low Grade cable Armored cable Single core cable Lead copper cable Aluminum cable Clean and PVC Pyro 7

Misc. Items Misc. Items : Samix Alternators Ballasts Carbide Compressors Converters Electric Motors Starters Transmissions Radiators 8

Electronic Scrap Electronics : E-Scrap Computer Towers Complete (no monitors) Types of E-Scrap CPU Chips (Ceramic & Plastic) Finger Cards Hard Drives Memory Cards (Gold & Silver) 9

Lead Lead : Pb Clean any form Wheel Weights 10

Lead Gel Batteries Lead Gel Batteries : Bat. Lead Acid Batteries Refer to points B) and C) of the general conditions. 11

The Making of an International Recycling Company Since 1888 RIMECO has held a solid position in the recycling trade and remains one of the larger recycling businesses in Scandinavia. The combined historical experience and current activities of the company make it a strong player in future international recycling business. FOUNDATION RIMECO can be traced back to 1888, when the Riggelsen family founded a trade and recycling business. The name RIMECO was created in July 1988 when our domestic recycling activities were sold. EXPANSION Following the death of Peter Fr. Riggelsen (1884-1951), the company was converted into a shareholding company, P. Riggelsen A/S, which was owned by his two sons Hans Mathias Riggelsen (1923-1977) and Peter Riggelsen senior (1927-2005). H.M. Riggelsen managed the Toender branch and from 1951 Peter Riggelsen senior managed the Aabenraa branch. 12

INTERNATIONALISATION In 1975, Peter Riggelsen (1951 - ), son of Peter Riggelsen senior and the fourth generation of the family business, joined the company and started the international era of the family company. In July 1988 when our domestic recycling activities were sold, the focus was to develop the international trading activities, which today has lead us to the solid foundation in Scandinavia, Baltic states and Russia. In July 2005 the company was sold partly to the german company group ELG Haniel, who became shareholder in 2011. In July 2012, Klaus Peter Riggelsen, the fith generation (1976 - ) became shareholder and owner of RIMECO in accordance with a agreement wih ELG Haniel. The future is set for expansion of the RIMECO Group. 13

Zinc Scrap Zinc : Zn All types of Zinc Die Cast 14

Titanium Titanium : Ti Alloy 6-4 Alloy 6-2 Alloy CP 15

Low Alloy Arisings Low Alloys : LA New/old arisings Production Equipment Turnings 16

Stainless Steel Arisings Stainless Steel : SST New/old arisings Production Equipment Turnings 17

Nickel Alloy Arisings Nickel Alloy : N Inconel Incoloy Hastelloy Monel Nimonic Haynes Nickel 18

Catalytic Converters Catalytic Converters : Satool All producers and models are accepted 19

Stainless Incinerated Steel Scrap Incinerated : ST304MV Fragmentised stainless incinerated steel scrap processed through an incinerating plant. 20

Reception of Goods Reception Control RIMECO controls all goods on arrival. All goods to be weighed in by sworn weighbridge. At reception of finished scrap products personnel must ensure that the goods are sorted according to specfications below. Claim All major deviances must be documented by means of digital photos. Claims for which material must be taken to landfill, this must be agreed with suppliers. Costs for landfill according to official rate at supplier s account. Negative List At Rimeco we do not wish to buy goods as mentioned on this page: - Must reject - Can reject Must reject 1. Radioactive steel scrap (flow measurers, ion measurers) 2. Insulated steel pipes (due to risk of fire in the shredder) 3. Tyre wire 4. Pressure vessels / closed objects (unless already cut) 5. Acetylene bottles in whatever condition (risk of fire in shredder) 6. Products contaminated with food or industrial waste 7. Uncleaned oil tanks 8. Slag or slag byproducts 9. Steriles Can reject 1. Steel wire, prestretched steel (cutting costs higher than material value) 2. Material which in general is oversize 3. Material which is non-conform to the contract 4. Blended materials 21

Quality of Goods A) Safety All grades shall exclude: 1. Pressurised, closed or insufficiently open containers of all origins which could cause explosions. Containers or pressure vessels shall be considered as in sufficiently open where the opening is not visible or is less than 10 cm in any on direction; 2. Dangerous material, inflammable or explosive, fire arms (whole or in part), ammunitions, dirt or pollutants which may contain or emit substances dangerous to health or to the environment or to the steel production process; 3. Hazardous radioactive material: - Material presenting radioactivity in excess of ambient level of radioactivity - Radioative material in sealed containers even if no significant exterior radioactivity is detectable due to shielding or due to the position of the sealed source in the scrap delivery. B) Steriles (Cleanness) All grades shall be free of: 1. all but negligible amounts of other non ferrous metals and non metallic materials, earth, insulation, excessive iron oxide in any form, except for nominal amounts of surface rust arising from outside storage of prepared scrap under normal atmospheric conditions. 2. All grades shall be free of all but negligible amounts of combustible non metallic materials, including, but not limited to rubber, plastic, fabric, wood, oil, lubricants and other chemical or organic substances. 3. All scrap shall be free of larger pieces (brick-size) which are non-conductors of electricity such as tires, pipes filled with cement, wood or concrete. 4. All grades shall be free of waste or of byproducts arising from steel melting, heating, surface conditioning (including scarfing) grinding, sawing, welding and torch cutting operations, such as slag, mill scale, baghouse dust, grinder dust, and sludge. 22

What we buy: RIMECO A/S buy various grades of non-ferrous: Aluminum Wheels Aluminum Turnings Aluminum Copper Radiators Aluminum Extrusion Aluminum Radiators Old Rolled Aluminum Cast Aluminum Zorba Scrap Brass Electric Motors Lead Household Cable Mixed Stainless Steel Brass Copper Radiators Copper Tanks Dry Bright Wire New Copper Tube Painted Copper Tube Aluminum Copper Radiators Steel Armored Copper Cable Catalytic converter Precious Metals What We Don t Buy Due to environmental restrictions and local and state law, we are unableto recycle the following items at our facility: Vehicles AC, refrigeration, freezers Sealed Tanks Engines Transmissions TV or Monitors Railroad Materials Beer Kegs Ammunitions Sealed Units Metals Contaminated with: glass, wood, grease, oil, foam, plastic or other foreign material Steel Storm Grates Cemetery markers or vases Historical markers Roadway signs Public utility materials Hazardous materials Laptops Copiers/printers Computer boards Power supply boxes 23

RIMECO AKTIESELSKAB Skibbroen 20 P.O. Box 77 DK-6200 Aabenraa +45 74 62 03 00 info@rimeco.dk www.rimeco.dk