CARPEMAR GROUP
COMPANY PRESENTATION The Carpemar Group has actually more than 40 years of expertise as a provider in the energy sector. Since 1968, Carpemar achieves with the necessary know-how to assimilate new developments and to work side-by-side with the clients. Thanks to a strategically favourable situation, we are delivering from our facilities at Saragossa a quick and efficient service all over Spain and across Europe. Carpemar is strongly committed to research, development and innovation. Therefore are generated new products, that are developed for example by a customer's wish or a as an initiative of our own R&D department. Such innovations allow us to anticipate the demands of the market. The company strengthened the R&D commitment by signing agreements with universities, foundations and public institutions for the development and validation of new products. The product quality of Carpemar is reflected in the successful certifications. In 2009, for our basic propylene glycol based anti-freeze protection Blue Sun it has been achieved the certification according to the standards ASTM 3306 and AA-52624A, in the well regarded INTA. Hence, we were the first producer that was awarded such certification of propylene glycol based anti-freeze protection according to these standards in the INTA laboratory. In the year 2008 Carpemar could also certify the standard ISO 9001:2000. It is our objective to improve the communication with our clients and to constantly control and meet the high quality standard level that we require to ourselves. At the moment we are introducing the standard ISO 14.000, previously to the next certification. Two further important goals of Carpemar are the environmental protection and the sustainability. In this sense, by the selection of both supplied materials and suppliers, we always develop our products in order to generate the least environmental impact. We neither use products that could harm the staff or the end customer. We have a complete laboratory at our disposal, for analysing heat transfer fluids. Such analysis is part of the preventing maintenance of installations. It's an additional service for our clients that is always at our clients' disposal for resolving doubts about the liquid's condition. Our Technical Department is always ready to answer questions of all kind. We can offer a complete range of products, customised as trademark or private label, with product formula on demand of the client, filled in containers from 1 to 1000 liters and also as a bulk good, always with a high quality standard and at a competitive price.
Solar Thermal Energy
SOLAR THERMAL PRODUCTS Green Sun: - Coolant-Antifreeze based on Propylene glycol from renewable resources. - Base on more stable high temperatures cracking isomer. - Organic antirust inhibitors for durable protection. - Delivery form: Ready to use with Frost Temperature 15ºC Blue Sun: Liquid Sun: - Coolant-Antifreeze based on Propylene glycol. - Organic antirust inhibitors for durable protection. - The best choice for your system. Ready to use with Frost Temperature -24ºC Ready to use with Frost Temperature -37ºC - Homologated in INTA according to ASTM 3306 (including ASTM 1384 and ASTM 4340) AA-52624A - Coolant-Antifreeze based on Propylene glycol. - Organic antirust inhibitors for durable protection. - High quality product for any solar thermal flat panel installation. Ready to use with Frost Temperature -20ºC Solar Coolant - Coolant-Antifreeze based on Propylene glycol. - Hybrid Organic-Inorganic Additivation. - Competitive price for an efficient and reliable product. Ready to use with Frost Temperature -12ºC THERMOSOL -22ºC, - Specific product for vacuum tube collectors systems. - Coolant-Antifreeze base on high boiling point non toxic glycols. - Organic Antirust Inhibitors. - Delivery form: Ready to us with Frost Temperature -22ºC
Solar Protection: - Antirust and Antiscale concentrated water based. - Clean and rust-free systems where frost protection is not required. - Low dosage, long term Protection due to Organic Technology. Ready to use. CS Descaling: - Descaling product for inox plate heat exchangers. - Formulated with 100% biodegradable and natural acid. - Non toxic product. - High concentrated product (1 liter dissolve 500 grams of limescale. - Quick effect. - Change color (red to yellow) when active material is depleted. Cleaner for Vacuum Tube Collectors: - Dissolve degradation products from circuit. - Restore flow in blocked systems. - Delivery form: Concentrated do not dilute. Refractometer: - Optical Checker for antifreezes. - Scales for Propylene Glycol, Ethylene Glycol and Battery Electrolyte. - Automatic Temperature Compensation (0-30ºC). - Kit containing: Refractometer, instructions in English pipette and screwdriver for calibration. ph Strips: - Quick and Easy measurement of ph for solar antifreeze. - Plastic Strips, triple color scale for more accurate measurement. - Scale from 4,5 to 10,0-100 strips per box.
Filling Station: - For filling and maintaining solar thermal installations. - Powerful pump with maximum flow of 31 liter/minute and till 5,9 bar. - 30 liters wide tank opening with leak-proof screw cap. - Fine filter with vision panel ahead of the pump. - Strong equipment and suitable to transport anywhere. - Instruction in English. Automatic Filling Group - Automatic filling system for solar circuits. - Tank, pump and pressure switch connected and ready to work. - 230 V, 50 Hz, IP55. Hydraulic flexible inox connection H ¾. - Electronic Model: pressure regulation between 3 and 3,6 bars. Dry working protection. - Digital Model: pressure regulation between 1 and 6 bars. Dry working, over temperature, over current and short circuit protection. Static Heat Sink - Six Ways Thermostatic Valve calibrated to 75 or 90 ºC. - Gravity dispositive, no pump required. - Operates against electric shutdown o pump malfunction. - Avoid overheating issues without electric consume. - From 1.520 a 5.540 W. - From 2 m 2 till 1o m 2 areas of solar panels. Static Heat Sink for Thermosiphon Systems. - Thermostatic valve calibrated to 70ºC. - Gravity dispositive, no pump required. - Operates against electric shutdown o pump malfunction. - Avoid overheating issues without electric consume. - Available in 800, 1.250 y 1.760 W. - From 2 m 2 till 5m 2 areas of solar panels.
Underfloor Heating Water Treatment
UNDERFLOOR HEATING PRODUCTS Mortar additive: - Fluidifying or plastifying mortar additive. - Improves the mortar quality. - Improves the tubes covering and the heat transmission. - In plasticising mortars, higher resistance against thermal expansion. - No increase of hardening time. - Filling rates 1.0 1.5% of the cement weight. Ca. 37.5 gr/m 2 and cm covering over the pipes. Antirust Additive (Luzar ASR) - Antirust and antiscaling additive. - Protects the metal pieces of the system against corrosion. - Contains active compounds against organic fouling/sludge. - Contains antiscaling protection, dissolves existing scaling and avoids new. - Filling rates: 1.5 kg per 200 liter of water in the system. Ca. 1 kg per 125 m 2 of heated surface. Cleaning Additive (Luzar LD) - Cleans the rust and scaling of a system, avoiding cold parts. - It contains a protection additive for metal pieces in the system. - Specific for underfloor heating, effective at low temperature. - Filling rates: 1.5 kg per 200 liter of water in the system. Ca. 1 kg per 125 m 2 of heated surface. Filling Station: - For filling and maintaining heating installations. - Powerful pump with maximum flow of 31 liter/minute and up to 5,9 bar. - 30 liters scaled tank with wide opening with leak-proof screw cap - Fine filter with vision panel ahead of the pump. - Robust, easy to use equipment and suitable to transport anywhere. - Instruction in English.
HEATING WATER PROTECTION AND TREATMENT PRODUCTS: Luzar Organic: - Coolant Antifreeze based on Monoethylene glycol. - Organic antirust additives. Ready to use with Frost Temperature 18ºC. Ready to use with Frost Temperature 37ºC. CS Descaling: - Descaling product for inox plate heat exchangers. - Formulated with 100% biodegradable and natural acid. - Non toxic product. - High concentrated product (1 liter dissolve 500 grams of limescale). - Quick effect. - Changes color (red to yellow) when active material is depleted. Cleaning Additive (Luzar LD) - Cleans the rust and scaling improving thermal transfer. - It contains a protection additive for metal pieces in the system. - Quick cleaning in radiators system to regular use temperature. - Filling rates: 1.5 kg per 200 liter of water in the system Antirust Additive (Luzar 7): - Antirust additive for iron, copper and aluminum installations - Protects the metal pieces of the system against corrosion - Eliminates the noise caused by the aluminum corrosion - Maintains the water clean for long period of times - Filling rate: 0.5-1% of the water in the system Luzar Sealing: - Sealing for water heating systems - Permanent sealing of leaks in metal and plastic - Quick effect - Filling rate: 1 Liter per 100 Liter water in the system
Geothermal Energy
GEOTHERMAL ENERGY PRODUCTS: Blue Sun: Monopropylene glycol: - Coolant-Antifreeze based on Propylene glycol. - Organic antirust inhibitors for durable protection. - The best choice for your system. Ready to use with Frost Temperature -24ºC Ready to use with Frost Temperature -37ºC - Homologated in INTA according to ASTM 3306 (including ASTM 1384 and ASTM 4340) AA-52624A - Propylene glycol for lowering the freezing point - Available Qualities: Industry and USP/EP (food) - Delivery form: Pure (min. 99,5%) Luzar Organic: - Coolant Antifreeze based on Monoethylene glycol. - Organic antirust additives. - Delivery form: Concentrate. Ready to use with Frost Temperature 18ºC. Ready to use with Frost Temperature 37ºC. Monoethylene glycol: - Monoethylene glycol for lowering the freezing point - Delivery form: Pure (min. 99,5%) Refractometer: - Optical Checker for antifreezes. - Scales for Propylene Glycol, Ethylene Glycol and Battery Electrolyte. - Automatic Temperature Compensation (0-30ºC). - Kit containing: Refractometer, instructions in English pipette and screwdriver for calibration.
Carpemar Group Ctra. de Castellón Km 3,7 Polígono la Unión, nave 3 E-50.013 Saragossa (Spain) Tel: +34 976 42 18 50 Mail: export@carpemar.com