Industry leading performance Speed: ppm max. 45% up* Accuracy: Industry No.1 ±0.07g max. 65% up* *Compared to conventional model Easy operation Higher visibility 10.4 inch color touch screen Easy initial settings and daily operation Controller can be separated from the main body *Cable max length 10m Reliability &Safety Maintenance information function Reject verification function 2
Industry leading performance New load cell New type high rigid cell shortens the settle time therefore resulting in high speed and high accuracy weighing. Wide variety of conveyor sizes Where floor vibration is an issue, the loadcell can remove low frequency vibration therefore maintaining high accuracy weighing. Dual load cell (option) A variety of conveyor sizes are available allowing products to be weighed at the maximum speed and accuracy. Easy operation Easy initial setting Yamatos 'Automatic program set up' allows initial settings to be performed without any complicated parameters. Easy initial settings and daily operation Easy screen control & visibility A highly visible and clear screen format for ease of operation Removable Controller (option) The control unit (screen) can be removed from the main body and located up to 10m away. In addition, adjustable angle of controller does not limit operator s working place and improve the work efficiency. 3
Easy cleaning & maintenance Monitoring errors such as weigh error, photo sensor error, motor error and so on and alert them. Showing the point of the error and how to recover it to minimize the downtime. Error and alert functions An indicator shows when consumable parts require replacement, this technology can then reduce down time. Parts replacement alert function High capacity load cell The loadcell can withstand up to 1000% of its maximum capacity therefore providing greater protection against accidental damage cleaning or maintenance work. Shorten maintenance time By unitizing the parts, the maintenance and repair time are shortened. Tool free maintenance The conveyor system has minimal components and can be removed and re attached easily and without the use of tools. 4
Outstanding food safety Tubular framework The tubular framework is SUS with an open frame structure which minimizes dust accumulation. Compliant with food hygiene law The conveyor belt is fully compliant and meets food hygiene laws. Reliability & safety Item Alert The clear display indicates any ares of concern that needs to be checked prior to daily operation. Reject verification (option) By installing sensors at rejecter, it can confirm whether defective products are being properly rejected and prevent those products from being passed on to the next conveyor. Environmental responsiveness The backlight is automatically turned off when the unit is not in operation for a specified period of time. The conveyor can also be stopped automatically when the unit is not operated for a period of time in order to save energy. Minimizes the environmental impact by reducing the number of components. Compliant with RoHS 5
Overall flexibility The line height and overall length of conveyors can be changes to suit your specific factory requirements. Wide pass line height variation Options Reject Device Pass line height variations Reject verification function Signal light Tri-colored light Buzzer Printer Dual load cell BCD product input Feedback Automatically conveyors stop function Controller can be separated from the main body with cable. Wireless LAN function Data acquisition software Wind cover (main body & rejecter) RS232C Ethernet External indicator Conveyor support BCD product output Transfer plate *Please contact us if you have other requirements. Wind cover Printer Print Sample Tri-colored light Handling capability 6
Combination Checkweigher and metal detector systems Features One-process for metal detection and checkweigher Combination solution can reduce the foot print of the machine, and investment and maintenance cost. Unified control for program change High sensitivity Utilizing simultaneous 2 frequencies from 4 types allowing higher sensitivity measurements to detect contaminants Original digital signal processing allows stable detecting sensitivity. Fe detection frequency SUS detection frequency Reliable detecting sensitivity self diagnostics through motion monitoring sensor fitted within the head Automatic temperature compensation Ease of operation Advanced high-definition color touch screen provides ease of operation and visibility. In addition, new auto-setting algorism enables easy setup. Maintenance support guide indicates the resource of the trouble and how to solve the issue thus reduces downtime. 7
Network Connection Capabilities Printer PC or Server Internet Server Checkweigher Dataweigh PC Printer Recording history and data The operation history and production data is automatically recorded and transferred to a PC or saved to a USB stick. This allows manipulation and interrogation of the data for verification and analysis purposes. USB memory port Making use of cumulative production data Feedback control with Dataweigh Multihead Weigher Feed back control When coupled with a Yamato Multihead Weigher, the checkweigher can feed back exact and actual weight so that the Multihead (Dataweigh) can adjust its weighing process. This function results in reduced giveaway and savings in labour costs. Net Weight Fill Function Net weight fill function Checkweigher one weighs the empty container, then the filler inserts the contents. Checkweigher two weighs the filled container, calculates the net weight and feeds back that net weight to the filler for more accurate feeding. Bottle weight input Filler Data management Checkweigher 1 Checkweigher 2 Feedback 8
Small type CS06LCS06LM Range:6 Max accuracy:±0.07 Max speed:ppm Dimensions (mm) Range Minimum graduation *Accuracy (Max.) *Speed (Max.) CS06L/CE3100 6g 0.05g ±0.07g ppm 6116m/min CS06LM/CE3100 Checkweigher CS06L-00 / CE3100 80 Fe0.4 SUS0.7 Max sensitivity Pass height 95 Fe0.45 SUS0.85 125 Operating environment Program number *Depend on product characteristics. AC100V±10%, 50/60Hz, single phaze VA 040 Relatively humidity 30% to 85%, Non-condensing 300 AC100, 200V±10%, 50/60Hz, single phaze 250VA CS06L Conveyor CS06L Max speed (pcs / min) Conveyor dimension () Width Length Width Length 160 160 Machine length () 575 685 665 885 685 665 885 Combination checkweigher and metal detector system CS06LM-00 / CE3100 Metal detector conveyor CS06LM Conveyor Max speed (pcs / min) Conveyor dimension () Width Length Width Length Machine length () CS06LM 590 160 835 925 1035 835 925 1035 9
Small type CS22LCS22LM Range:202,200 Max accuracy:±0.2 Max speed:ppm Dimensions (mm) Range Minimum graduation *Accuracy (Max.) *Speed (Max.) CS22L/CE3100 202,200g 0.1g ±0.2g ppm 6116m/min CS22LM/CE3100 Checkweigher CS22L-00 / CE3100 80 Fe0.4 SUS0.7 Max sensitivity Pass height 95 Fe0.45 SUS0.85 125 Operating environment Program number *Depend on product characteristics. AC100V±10%50/60Hz, single phaze VA 300 AC100, 200V±10%, 50/60Hz, single phaze 250VA 040 Relatively humidity 30% to 85%, Non-condensing 200 CS22L Conveyor CS22L Max speed (pcs / min) Conveyor dimension () Width Length Width Length 160 160 Machine length () 685 665 885 685 665 885 Combination checkweigher and metal detector system CS22LM-00 / CE3100 Metal detector conveyor CS22LM Conveyor Max speed (pcs / min) Conveyor dimension () Width Length Width Length Machine length () CS22LM 590 160 835 925 1035 835 925 1035 10
Small type CS33LCS33LM Range:303,300 Max accuracy:±0.2 Minimum graduation 0.1g ±0.3 Minimum graduation 0.2g Max speed:310ppm Dimensions (mm) Range Minimum graduation *Accuracy (Max.) *Speed (Max.) 0.1g ±0.2g 310ppm 575m/min CS33L/CE3100 303,300g 0.2g 0.1g ±0.3g ±0.2g 190ppm 310ppm 576m/min 575m/min CS33LM/CE3100 0.2g ±0.3g 190ppm 576m/min Checkweigher CS33L-00 / CE3100 80 Fe0.4 SUS0.7 Max sensitivity Pass height 95 Fe0.45 SUS0.85 Fe0.45 SUS0.85 125 Fe0.5 SUS0.9 AC100V±10%, 50/60Hz, single phaze VA AC100, 200V±10%, 50/60Hz, single phaze 250VA Operating environment Program number 040 Relatively humidity 30% to 85%, Non-condensing 300 *Depend on product characteristics. CS33L Conveyor Max speed (pcs / min) Conveyor dimension () Width Length Width Length Machine length () CS33L 310 220 220 170 170 190 190 190 320 320 685 665 885 810 910 1010 910 1010 1110 1010 1110 1210 Combination checkweigher and metal detector system CS33LM-00 / CE3100 Metal detector conveyor CS33LM Conveyor Max speed (pcs / min) Conveyor dimension () Width Length Width Length Machine length () CS33LM 310 220 170 190 590 800 320 840 930 1040 1210 1310 1410 11
Medium Type CM06LM Range:606,000 Max accuracy:±1.0 Max speed:ppm Range Minimum graduation *Accuracy (Max.) *Speed (Max.) 80 CM06LM/CE3100 606,000g 0.5g ±1.0g ppm 460m/min Dimensions (mm) Combination checkweigher and metal detector system CM06LM / CE3100 Metal detector conveyor Max sensitivity Pass height 95 125 Operating environment Program number *Depend on product characteristics. Fe0.45 SUS0.85 Fe0.5 SUS0.9 AC100, 200V ±10%50/60Hz, single phaze, VA 040 Relatively humidity 30% to 85%, Non-condensing 300 CM06LM Conveyor CM06LM Max speed (pcs / min) 100 100 Conveyor dimension () Width Length Width Length 320 800 Machine length () 1210 1310 1410 1210 1310 1410 12
Medium Type CM12L Range:6012,000 Max accuracy:±1.0 Max speed:ppm Dimensions (mm) Range Minimum graduation *Accuracy (Max.) *Speed (Max.) Operating environment Program number CM12L/CE3100 6012,000g 0.5g ±1.0g ppm 460m/min AC100V ±10%, 50/60Hz, single phaze, 250VA 040 Relatively humidity 30% to 85%, Non-condensing 300 CM12L-00 / CE3100 *Depend on product characteristics. CM12L Conveyor Max speed (pcs / min) 100 100 CM12L 100 100 100 100 Conveyor dimension () Width Length Width Length 320 320 Machine length () 810 910 1,010 910 1,010 1,110 1,010 1,110 1,210 810 910 1,010 910 1,010 1,110 1,010 1,110 1,210 13
Medium Type CM30L Range:0. Max accuracy:±2 Max speed:50ppm Dimensions (mm) Range Minimum graduation *Accuracy (Max.) *Speed (Max.) Operating environment Program number CM30L/CE3100 0.kg 2g ±2g 50ppm 231m/min AC100V ±10%, 50/60Hz, single phaze, VA 040 Relatively humidity 30% to 85%, Non-condensing 300 Checkweigher CM30L / CE3100 *Depend on product characteristics. CM30L Conveyor Conveyor dimension Max speed (pcs / min) Width Length CM30L 50 CM30L-2PO (with pusher reject) Dimensions (mm) Checkweigher CM30L-2P0 / CE3100 with pusher reject Checkweigher CM30L-2P0 / CE3100 with pusher reject and pool conveyor Reject conveyor Reject conveyor Good Good Rejected item Rejected item 14
Reject devices Diverter reject (air / motor powered) Rejects the product by diverter arm mechanism - over, under or accept. Ideal for thick products and boxes. Good Width Product Length size (Max.) Height Weight Speed (Max.) Air supply CS CM F31660F F31660FM(H) F32460F(T) F32460FM(H) F33274F F34084F 160 200 2,200g 270ppm 0.40.7MPa, 0.4NL/time 6116m/min 160 200 200 2,200g1100 2,200g0 180ppm220ppm 200ppm 0.40.7MPa, 0.4NL/time 6116m/min 6116576m/min 155VA 200 2,200g1100 100ppmppm 320 540 200 6,000g ppm 540 200 6,000g 130ppm 0.40.7MPa, 0.4NL/time 0.40.7MPa, 0.4NL/time 6116m/min 155VA 462m/min 462m/min 110VA Air blast reject Uses air to reject the product. Ideal for high speed weighing of small and light products. Product size (Max.) Width Length Height Weight A21624I A2(3)1633I A2(3)1644I 160 160 300g CS A2(3)2433I A2(3)2444I 160 300g Speed (Max.) ppm ppm Air supply 0.40.7MPa, 5NL/time 0.40.7MPa, 5NL/time 6116m/min 6116m/min Good Driven drop flap reject Driving drop flap reject system eliminates excess or short weigh items from all checked products by conveyor down. Product size (Max.) Width Length Height Weight S21624F S21633F S21644F 160 130 2,200g CS S22433F(T) S22444F(T) 130 2,200g 3,300g S23F S23250F S23F 320 540 130 3,300g CM S40F S50F S60F 540 130 12,000g Speed (Max.) 100ppm 100ppm 50ppm 50ppm Air supply 0.40.7MPa, 2.0NL/time 0.40.7MPa, 2.5NL/time 0.40.7MPa, 3.0NL/time 0.40.7MPa, 3.5NL/time 6116m/min 6116576m/min 576m/min 460m/min Good 110VA Pusher reject The device pushes the product to reject it from the conveyor. Suitable for thick products and boxes. Product size (Max.) Width Length Height Weight P21624F P21633F P21644F 160 200 2,200g CS P22433F(T) P22444F(T) 200 2,200g 3,300g P23F P23250F P23F 320 200 3,300g P40F P50F P60F 200 12,000g CM P24553F 30,000g Speed (Max.) 180ppm 160ppm ppm 100ppm 50ppm Air supply 0.40.7MPa, 2.0NL/time 0.40.7MPa, 2.5NL/time 0.40.7MPa, 3.0NL/time 0.40.7MPa, 3.5NL/time 0.40.7MPa, 3.5NL/time Good 6116m/min 6116576m/min 576m/min 460m/min 110VA 431m/min 15
In 1966, we introduced the Checkweigher CB3. We have supplied high-performance, robust, and user-friendly Checkweigher Series units for about 50 years now, while building up a global customer base over that time. Our headquarters are located in Akashi, apan, and we have regional offices in the U.S.A., Canada, Germany, the Netherlands, the U.K., France, Russia, China, India, UAE, Mexico and Thailand. Our worldwide sales network includes representatives in more than 70 countries, and our highly experienced sales and service staff provides customers everywhere with a high level of expertise and service. Yamato Spare Parts and Service are subject to the same high demands in quality as the machines themselves. The listed speed, weight and volume are standard values. Other specifications are also available. Please contact Yamato for details. This machine is covered by a number of patents worldwide. All illustrations, specifications, and descriptions are subject to change without notice. CAT.NO.B0000EN00A00 10Ry Printed in apan