SUFFOLK VS CANADIAN ARCOTT

Similar documents
"Positioning Lamb Producers to be Competitive in the U.S. Market" Jeff Held, SDSU; Roger Haugen, NDSU; & Paul Berg, NDSU

SDSU Sheep Day andusssa Regional Workshop

Quality Standards for Beef, Pork, & Poultry. Unit 5.01

Beef Carcass Grading and Evaluation

Lamb Growth Efficiency and Optimum Finished Weight

Available from Deakin Research Online:

Benefits of genomic selection in Merino, Terminal and Maternal indexes

Objective carcass measurements to improve lean meat yield and eating quality in Australian beef, sheep and pork

Developments in the Genetic Improvement of a Large Commercial Population in the New Zealand Sheep Industry

THE CANADIAN BOXED BEEF REPORT REPORT SUMMARY & SPECIFICATIONS CANFAX RESEARCH SERVICES 12 APRIL 2018

EFFECT OF SIRE BREED ON STEER PERFORMANCE, CARCASS CHARACTERISTICS, BOXED BEEF YIELDS AND MEAT TENDERNESS

Economic evaluations of beef bulls in an integrated supply chain 1

See what s on the inside can SRUC s new mobile

Welcome to Igenity Brangus and the Power of Confident Selection

Utah State University Ranch to Rail Summary Report

The Growth Performance of Two Lines of Pig Reared under Two Differing Environmental Conditions

Animal Science 144 Beef Cattle & Sheep Production R. D. Sainz Lecture 04

Animal Science 144 Beef Cattle & Sheep Production R. D. Sainz Lecture 04

Animal Science 144 Beef Cattle & Sheep Production R. D. Sainz Lecture 04

Understanding and Using Performance Data in Judging Classes

Understanding and Using Expected Progeny Differences (EPDs)

Breeding for Carcass Improvement

More cattle are being marketed on carcass. Selection for Carcass Merit. Texas Adapted Genetic Strategies for Beef Cattle IX: Genetics of Carcass Merit

4-H LIVESTOCK REcoRD BooK BEEF -SWINE-SHEEP

Use of Real Time Ultrasound in % IMF Prediction for Swine

My project is (check project taken) SHEEP 0 Market Lamb 0 Ewe Flock

Heterosis and Breed Effects for Beef Traits of Brahman Purebred and Crossbred Steers

Feeder Calf Grading Fundamentals

1969 Sheep and Wool Day

Video Image Analysis for meat yield - opportunities and challenges for value-based marketing of sheep and beef carcasses

Collecting Abattoir Carcase Information

FUNDAMENTALS. Feeder Calf Grading. Jason Duggin and Lawton Stewart, Beef Extension Specialists.

Genetic analysis of production traits in pigs measured at test stations

Value-Based Marketing: Demonstrating Problems and Potential

The Carcass and Meat Quality Characteristics of Two Lines of Pig Reared under Two Differing Environmental Conditions

Making Beef Out of Dairy

Application of Carcass Ultrasound in Beef Production. T. Dean Pringle Animal and Dairy Science University of Georgia

Available from Deakin Research Online:

2018 International Production & Processing Expo. Clyde Campbell Scott Australia

Effect of Angus and Charolais Sires with Early vs Normal Weaned Calves on Feedlot Performance and Carcass Characteristics

Traits of Cattle That Hit the Quality Target Gary D. Fike Feedlot Specialist Certified Angus Beef LLC

RULES AND OFFICIAL PROCEDURES. 55 th ANNUAL NATIONAL COLLEGIATE MEAT ANIMAL EVALUATION CONTEST LUBBOCK, TEXAS

Body Condition Scoring of Beef Cattle for Youth Producers What It Is and How to Use It

Carcass Video Images in Genetic Evaluation and Breeding Program in Ireland

Researches concerning the improvement of carcasses issued from reformed and fattened adult sheep

An evaluation of genetic trends over 10 year period from data collected from the ABBA carcass evaluation program. Background

GROWTH TRAITS AND DRESSING PERCENTAGE OF STRAIGHTBRED AND CROSSBRED RABBITS

Ranch to Rail Summary Report

Tight Supplies, Higher Prices, and the Beginning of Expansion

Comparison of carcass composition, performance, and tissue deposition rates among breeds of swine

Prediction of retail product and trimmable fat yields from the four primal cuts in beef cattle using ultrasound or carcass data 1

Forage Finishing Beef Cattle in Northern Ontario

Genetics for the Market versus the Marketing of Genetics

Is Marbling Important

Incorporating Growth Performance with Youth Market Hog Shows 1

Improving Genetics in the Suckler Herd by Noirin McHugh & Mark McGee

Ultrasound feedlot sorting. Evaluation of feedlot sorting system using ultrasound and computer technology

BREEDPLAN EBVs The Traits Explained

Angus BREEDPLAN GETTING STARTED

Cull Cow Meat Quality

Q1 How well are you able to satisfy your customers' orders?

Trends in Swine Production Areas of Largest Pork Producers

Genetic Parameters and Their Use in Swine Breeding

Sheep crossbreeding in Ethiopia

The economics of using DNA markers for bull selection in the beef seedstock sector A.L. Van Eenennaam 1, J.H. van der Werf 2, M.E.

Understanding Expected Progeny Differences (EPDs) Scott P. Greiner, Extension Animal Scientist, Virginia Tech

PG Technicians Tully Visit 24 th /25 th Oct 2017

EPD Info 1/5. Guide to the American Gelbvieh Association Expected Progeny Differences (EPDs)

The Convergence of ICT and Automatic Sorting System: A Quantitative Performance Analysis

Incorporating meat quality in sheep breeding programmes: potential of non-invasive technologies

UNIT 6 UNDERSTANDING THE PROCESS FOR PRODUCING, BREEDING, AND MARKETING AGRICULTURE ANIMALS

Strategies for Optimizing Value of Finished Cattle in Value-Based Marketing Grids

Meat research for market development for indigenous pork produced by smallholders in northern Vietnam

Recognizing Wholesale and Retail Cuts

2019 A utumn R am S ale

A review of carcass conformation in sheep: assessment, genetic control and development

Market specifications for beef cattle

Lamb Quality. Lesa Eidman, Director of Producer Resources and Sustainability

Q1 How well are you able to satisfy your customers' orders?

Post-Weaning Nutritional Management Affects Feedlot Performance, 12 th Rib Fat, and Marbling Deposition of Angus and Wagyu Heifers

Use of sire referencing schemes to select for improved carcass composition in sheep

Hitting the targets. Manufacturing Beef 11/9/2010. Manufacturing. The process of turning grass into high quality, edible protein

COW/CALF CORNER The Newsletter

Marketing prime lamb for Better Returns

Estimation of Additive and Heterotic Direct and Maternal Genetic Effects for Carcass Traits in Beef Steers.

Feeder calf prices by breed cross and break-even feeder calf

Second-Quarter 2016 Sheep Industry Review

Longhorn Cattle Performance Recording

Understanding EPDs and Accuracies

NORTHEAST TEXAS COMMUNITY COLLEGE

Carcass composition of Namaqua Afrikaner, Dorper and SA Mutton Merino ram lambs reared under extensive conditions

Genomic selection in the Australian sheep industry

Selecting and Sourcing Replacement Heifers

Red Meat Update - Launceston. Richard Norton

BODY COMPOSITION GRAZING OR FEEDLOT STEERS DIFFERING IN AGE AND BACKGROUND

Title: Development of Condition Scoring Guide using live animals - NPB #05-172

Program or Technology? Remember: National Genetic Improvement is more than a technology. Genetic Improvement: Traditional Considerations

SUMMARY: The U.S. Department of Agriculture s (USDA) Agricultural Marketing

Effects of Backgrounding and Growing Programs on Beef Carcass Quality and Yield

ECONOMICS OF USING DNA MARKERS FOR SORTING FEEDLOT CATTLE Alison Van Eenennaam, Ph.D.

Transcription:

SUFFOLK VS CANADIAN ARCOTT AS TERMINAL SIRE A 100 TO 1 FIGHT? MIREILLE THÉRIAULT 1 ET FRANÇOIS CASTONGUAY 1 1 Agriculture and Agri-Food Canada, Dairy and Swine Research and Development Centre, Lennoxville. Article published in 006 in Sheep Canada M any would have been ready to bet on the winner of an eventual fight between market lambs coming from either Canadian Arcott or Suffolk rams The blacks having, of course, the support of the majority. But who would have bet right? The Suffolk fans or the braver (should we call them the gambler ) fans of the Canadian Arcott? One thing is sure: the easy victory predicted by the so-called experts is far from reality! To everybody s dismay, the match ended with a draw verdict. In Canada, sheep producers use multiple breeds and crosses to produce market lambs. This makes the production of a consistent quality lamb difficult or almost impossible, even though it is an essential condition to expand the markets. The choice of a breed as terminal sire involves many considerations, often leaded by emotions rather than reason or logic. The need for well conducted studies comparing the many available breeds was unquestionable. Our research team have tried to find some answers to this tricky question about the choice of a terminal breed sire to produce commercial market lambs. We have compared growth performance, carcass quality and cutability of lambs from Canadian Arcott and Suffolk rams. At the same time, we have also determined the effect of a higher slaughter weight on lambs muscle growth and fat deposition. In the left-hand corner In the right-hand corner A total of 38 Romanov x Dorset (½RV½DP or ½DP½RV) prolific hybrid ewes were mated to 7 rams (13 Canadian Arcott - CD and 14 Suffolk - SU) on 10 Quebec commercial farms to produce the 18 lambs needed for the experiment. Half of the selected lambs were from a SU terminal sire cross and the other half was from a CD terminal sire cross (as many males as females). The lamb selection was done to get a representative group from each terminal cross (not the best nor the worst). All lambs were weaned at approximately 55 days of age. At about 65 days of age, the lambs were selected on each farm and transported to the La Pocatière commercial lamb test station. A slaughter weight 1 was then allotted to each of the 18 lambs (16 lambs in each weight class for the two genotypes) : and for females ; and 1 Live weight following a 1h fasting period Dernière modification 1 juin 006 1

for males. Males and females were reared in separate pens. The lambs had ad libitum access to commercial concentrate and hay during the experimental period. Lambs were weighed weekly and ultrasound measurements were taken at different anatomical sites every two weeks. After slaughtering, the lamb carcasses were split down the midline and the left half-carcass was shipped to the AAC Research Centre in Lennoxville. Those half-carcasses were then separated into primal cuts (shoulder, loin, rack and leg), scanned using dual-energy X-ray absorptometry (DEXA) and then fabricated into retail cuts (trimmed at 6 mm of fat ; shoulder, square-cut shoulder, loin trimmed, rib rack roast ready, leg, partially boneless leg, flank and breast). Statistical analysis of breed effect was evaluated for each sex separately because the slaughter weight classes were different for male and female. Ding! Ding! Ding! Let the fight begin! Differences between ¼RV¼DP () and ¼RV¼DP () lambs were minimal (Table 1). ADG were similar for the and the lambs for each sex (339 vs. 348 g/d for females and 433 vs. 446 g/d for males). But since the were slightly heavier at the beginning of the experimental period (and at weaning), they reached slaughter weight at a younger age than the, about a week earlier, and even less for females. It is difficult to identify the exact cause of this variation in the weaning weights between the two crosses since the The DEXA instruments allows the determination of tissue weights (fat, lean and bone) without having to dissect the animal. environmental factors (management on each farm) and genetic factors (genotype) are confounded. Even if the seem leaner than the, the difference was not statistically significant (1.4 vs. 13.9 mm at GR site 3 ). Slaughtering lambs at heavier weights results in an increased age at slaughter (10 and 15 d for males and females, respectively) and, by doing so, a higher fat depth (Table 1). Even when the slaughter weights were lower for females, the increase in fat was more noticeable. The dimensions of the loin eye muscle (area and/or thickness) were enlarged significantly with the increase of weights. In fact, the loin eye muscle area was 1 to cm² larger for heavier females and males, respectively. Since the GR is so important in the evaluation of the saleable meat yield 4 (SMY) calculation, heavier carcasses got lower SMY. Still, it must be mentioned that females weighing more than 46 obtained average GR measurements of over 18 mm, which is considered excessive. With regard to the cutability, no significant difference was noted between the two crosses for the weight of primal and retail cuts (Table ). For males, the estimate of lean meat yield 5 (LMY) gave a slight advantage to the. But this difference is far from convincing since it is not statistically significant. The retail yield 6 was equal for the and the, 3 Total tissue depth at the 1 th rib, 11 cm from the midline, measured by a grading rule at the slaughterhouse (grading site). 4 SMY = 78.9 - (0.51 GR) + (1.5 average muscling score) ; Jones et al., 1996. Can. J. Anim. Sci. 76:49-53. 5 LMY = 65.8 (0.074 hot carcass weight) - [0.43 (6.38 + 0.88 GR)] ; Jones et al., 199. Can. J. Anim. Sci. 7:37-44. 6 Sum of the square cut shoulder, semi-boneless roast, loin and rack roast retail cuts weights trimmed to 6 mm of fat divided by the weight of those same primal cuts (shoulder, leg, loin). Dernière modification 1 juin 006

around 80%. This yield has not varied between the two slaughter weights. Indeed, the fat trimming losses are only slightly increased (+ 0.5%) for females and are the same for males. Yet again, LMY estimation credits the lighter carcasses. And the winner is Our study demonstrates that SU- and CD-sired crossbred lambs are very similar for their growth performances. Moreover, no significant difference was noted for carcass quality between crosses. On the other hand, even if the fat deposition is increased, it appears that the weight of retail cuts (excess fat trimmed) was improved with increasing slaughter weight. But the estimation of LMY decreased in higher slaughter weight. Subsequent analysis on exact carcass composition data (DEXA) should give us more information on the relative importance of the different tissues between breeds and slaughter weight classes. Consumers ask for cuts with more lean with an optimal fat cover. Lamb carcasses being often too fatty, it is necessary to adapt the lamb production in order to encounter the consumer s demand. Works should be directed towards several aspects of the production as genetic (choice of breed, sire and dam selection ) and management (feeding, slaughter weight ). Dernière modification 1 juin 006 3

Table 1 Growth performances and carcass quality of male and female lambs according to terminal sire breed and slaughter weight. VARIABLES FEMALES MALES Initial age (d) 64.0 64.3 64.5 64. NS NS 63.9 65 64.5 64.7 NS NS Initial weight () 1.4.1 3.0 3.1 * NS.9 4.6 5.9 6.0 * NS ADG (g/d) 337 341 359 338 NS NS 41 445 45 439 NS NS Slaughter age (d) 139.1 149.3 18.8 148.6 0.1 * 133.5 139.1 11.0 136.1 * * Backfat thickness 1 (mm) 9.5 10.9 9.1 11.1 NS * 8.0 9.1 8.7 8.9 NS * Loin eye muscle depth 1 (mm) 9.9 30.8 30.6 30.8 NS NS 30.3 3.0 9.8 31.5 NS * Loin eye muscle area² (cm²) 16.7 17.9 16.7 18.0 NS * 18.4 0.8 18.0 19.4 NS * Slaughter weight () 4. 47.4 4.3 48. NS * 47. 5.4 47.3 5.8 NS * Hot carcass weight () 1.4 4.3 1.3 4.4 NS * 3.5 6. 3. 6.3 NS * Dressing percentage (%) 50.6 51. 50.4 50.6 NS NS 49.7 50.1 49.0 49.8 NS NS GR (mm) 16.4 18.4 13.8 18.4 NS * 1.9 14.9 11.7 13. < 0.1 * Average muscling score 3.6 3.6 3.5 3.7 NS NS 3.4 3.4 3. 3.3 NS NS SMY 3 (%) 75. 74.3 76.3 74.1 NS * 76.7 75.6 77 76.1 NS * * P < 0.05 statistically significant effect; NS : Non significant 1 Backfat and loin eye muscle depth measured by ultrasound, 4 to 48 h before slaughter, between the 3 rd and 4 th lumbar vertebrae, alongside the midline. ² Loin eye area measured on the carcass with a stencil, between the 3 rd et 4 th lumbar vertebras. 3 SMY = 78.9 - (0.51 GR) + (1.5 average muscling score) ; Jones et al., 1996. Can. J. Anim. Sci. 76:49-53. Dernière modification 1 juin 006 4

Table Half-carcass cuts weights and yields for male and female lambs according to terminal sire breed and slaughter weight. VARIABLES FEMALES MALES Primal cuts () 10.4 11.8 10.3 1.0 NS * 11.3 1.8 11.0 1.6 NS * Retail cuts () 7.7 8.7 7.7 8.8 NS * 8.5 9.5 8.3 9.4 NS * LMY 1 (%) 55. 54.3 56.3 54.3 NS * 56.4 55.4 56.9 56.1 < 0.1 * Retail yield (%) 80.7 80.7 80.8 79.8 NS < 0.1 81. 80.5 80.6 80.3 NS NS * P < 0.05 statistically significant effect; NS : Non significant 1 LMY = 65.8 (0.074 hot carcass weight) - [0.43 (6.38 + 0.88 GR)] ; Jones et al., 199. Can. J. Anim. Sci. 7:37-44. Sum of the square cut shoulder, semi-boneless roast, loin and rack roast retail cuts weights trimmed to 6 mm of fat divided by the weight of those same primal cuts (shoulder, leg, loin). Dernière modification 1 juin 006 5