TENDER NOTICE Sealed tenders are invited for the supply of Taper, Straight, Die Rings, and Press Roll Shell for Pellet Mill and stitching Thread as per following details. Sr No Particulars Required Quantity in Nos. Price of Tender Form E.M.D. Rs. Rs 01 Taper 15 02 Straight 35 03 Press Roll Shell 120 Front Ring for Straight 3 500 /- 1,00,000 /- 05 Rear Ring for Straight (Holder Ring) 3 06 4 Ply Polyester Stitching Thread 4500 250 /- 20,000 /- Blank Tender Forms alongwith technical specification are available for sale at below office from 18-12-2017 to 30-12-2017 of any working day between 11.00 A.M. to 4.00 P.M. Sealed tenders should reach this office on or before 01-01-2018. For more details please visit our website www.gokulmilk.coop. The sangh reserves right to accept or reject any or all the tenders without assigning any reason. Managing Director Chairman Kolhapur Zilla Sahakari Dudh Utp.Sangh Ltd., Shri Mahalaxmi Cattle Feed Plant, Plot No.B-3, Kagal-Hatkanangle Five Star Indl. Area, Dist-Kolhapur-416 236 (M.S.) Tel No.0231-2305362,63,64 Email:cfp@gokulmilk.coop
KOLHAPUR ZILLA SAHAKARI DUDH UTPADAK SANGH LTD., KOLHAPUR (CATTLE FEED PLANT) ---------------------------------------------------------------------------------------------------------------------------------------------- Tender Form for Pellet Mill Die, Press Roll Shell and Die Rings ----------------------------------------------------------------------------------------------------------------------------------------------- 1) Name of the Party : 2) Address : 3) Phone Nos : 4) GST No of the Party : 5) Requirement : As per Schedule mentioned in Annex. A attached with Tender Form.. 6) E.M.D. Details : 7) Other : As per annexure A 8) Price Details : Sr No Particulars Unit Basic Price Rs. G.S.T. Rs. Total Unit Price Rs. ( inclusive all taxes and delivery at destination mentioned in annexure A ) 01 Taper (Die Holes must be Mirror Finished) 02 Straight (Die Holes must be Mirror Finished) 03 Press Roll Shell 2/-
-2- Sr No Particulars Unit Basic Price Rs. G.S.T. Rs. Total Unit Price Rs. ( inclusive all taxes and delivery at destination mentioned in annexure A ) Front Ring for Straight 05 Rear Ring for Straight (Holder Ring) We have accepted all the terms and conditions for supply of Pellet Mill Die, Press Roll Shell and Die Rings. Date : Seal and Signature of Tenderer
KOLHAPUR ZILLA SAHAKARI DUDH UTPADAK SANGH LTD., KOLHAPUR (CATTLE FEED PLANT) -------------------------------------------------------------------------------------------------------------------------------------------- General Terms and Conditions for supply of Pellet Mill Die, Press Roll Shell and Die Rings. Annexure A 1. Tender must be submitted in given tender form only. 2. Blank tender forms are available for sale on cash payment of Rs.500/- at our Cattle Feed Plant Kagal MIDC office from 18-12 - 2017 to 30-12- 2017 on any working day between 11.00 A.M. to 4.00 P.M. The last date for submission of tender alongwith EMD is 01-01-2018. 3. EMD of Rs.1,00,000/- (Rs. One Lakh Only) must be submitted by DD of any nationalized bank payable at Kolhapur infavour of Kolhapur Zilla Sahakari Dudh Utpadak Sangh Ltd., Kolhapur or by RTGS. Our RTGS details is as belows. Tender without EMD will not be considered. a) Name : Kolhapur Zilla Sahakari Dudh Utpadak Sangh Ltd., Kolhapur b) Name of Bank : Indian Bank c) Bank Branch : Shahupuri d) Account No. : 499924784 e) IFSC code : IDIB000K4 4. The tenderer can download blank tender form sangh website www.gokulmilk.coop In this case tenderer should deposit total Rs.1,00,500/- through RTGS.(EMD Rs.1,00,000/- and tender form price Rs.500/- ) 5. EMD will return without interest after producing original receipt alongwith request letter. Successful tenderer s EMD will kept with us as a security deposit without any interest and will be returned after supply of all material. 6. Sealed tender duly marked as Tender for Stitching Thread should reach at Cattle Feed Plant Kagal MIDC office on or before 01-01-2017. 7. The tenderer should attend the Board Meeting for negotiation on his own cost. The date of the Board Meeting will be informed to the tenderer in advance. If the tenderer is not able to attend Board Meeting, the tenderer s authorized representative may attend the Board Meeting with an authority letter. 8. Payment : 100% after receipt and inspection of the of the spares at our site. 9. Delivery Schedule 1) Mahalaxmi Cattle Feed Plant, Gadmudshingi, Tal. Karvir, Dist. Kolhapur- 416 119 (M.S.) Sr.No. Month Taper 6 mm Press Roll Shell 01 March 2018 5 15 02 May 2018 5 15 03 July 2018 5 15 2/- -2-
2) Shri Mahalaxmi Cattle Feed Plant, Plot No.B-3, Kagal Hatkanangle Five Star Industrial Area, Dist. Kolhapur-416 236 (M.S.) Sr.No. Month Straight Collar Die 6 mm Press Roll Shell Front Ring for Straight Rear Ring for Straight (Holder Ring) 01 March 2018 6 25 3 3 02 May 2018 6 0 0 0 03 July 2018 6 25 0 0 September 2018 6 0 0 0 05 November 2018 6 25 0 0 06 January 2019 5 0 0 0 10. Technical Specification Sr. No. Particulars Taper Straight Press Roll Shell 01 ID in mm 520 520 180 02 OD in mm As per As per Requirement Requirement 250 03 Width in mm 184 184 142 Rate of Production 10 TPH 10 TPH 05 Hole Size in mm 6 mirror finished 6 mirror finished 06 No.of Rear & Front side Tap Holes 12 12 07 Rear & Front side Tap Thread size M16 M20 08 Depth of Rear & Front Side Thread Hole in mm 22 22 09 Rear & Front Side Tap hole PCD in mm 565 565 10 Required Qty in Nos 15 35 120 11 Remark All Die shall be produced minimum 3000 MT production without mash formation. Suitable for 32220 taper roller bearing 12 Specification of Pellet Production Die Holes must be Mirror Finished Protein 21.0 to 22.0 % Fiber 10.0 to 12.0 % Oil 3.3 to 3.6 % Silica 2.5 to 3.0 % Manager (CFP) We have read, examined, studied and accept all the terms and conditions as above for supply of Pellet Mill Dies and Press Roll Shell. Seal and Signature of Tenderer