RTS systems provide innovative and economical solutions for non-penetrating rooftop support systems. Our environmentally friendly systems dampen vibrations helping to extend roof life while providing stable support for your high cost equipment. RTS systems fully engineered and pre-built components ensure easy installation. Our system design allows customized components to fit your specific applications making RTS the best choice for Pipe, HVAC Conduit, Duct Support, Crossovers, and Walkway systems.
Bases for Duct Support and Hanging Pipes Innovative, economical RTS systems provide complete rooftop support solutions. Our multiple base options ensure the right foundation to meet your application needs. RTS systems are non-roof-penetrating, UV resistant and suitable for installation on most roof types. RTS Classic LD Base RTSUP3A LD bases are strong, economical, and versatile with a 200 lbs. load rating for lightweight low hanging trapeze pipe and duct supports. RTS Classic HD Base RTSFPB18 RTS heavy duty plastic support bases are easily adjustable and provide increased support for up to 750 lbs. for heavier trapeze pipe and duct supports. RTS Recycled Rubber SD Base RTSF21 - No Gussets RTS Recycled Rubber HD Base RTSF21G - With Gussets Both options provide extreme flexibility and strength when supporting trapeze pipe and duct supports for standard and customized systems. Each base can support a uniform load of 1500 lbs. RTS - HD Steel Base RTSSPB20 Steel Support HD Steel bases offer versatility when a rooftop attachment is necessary. This permanent support base allows post installation flashing and is ideal when direct roof connections are required. Supports up to 1500 lbs.
RTS Various Base Applications Our multiple base options ensure the right foundation to meet your application needs. RTS systems are flexible and secure, ensuring stability while protecting your expensive equipment. Ideal for walkways, equipment, pipe, duct and conduit applications. RTS Classic LD ST RTSSPSN Conduit and pipe light weight supports are strong, economical, and versatile with a 200 lbs. load rating. RTS Classic LD EX RTSTR1526 Offers extended support for conduit, pipe, walkways, equipment with load bearing of 400 lbs. per system. 26 /38 /50 /52 sections RTS Classic LD with Channel RTSUP6 6 strut RTSUP10 10 strut Ideal for conduit and small pipe supports. Each support carries up to 200 lbs. RTS Strut Lumber RTSSL24 2 x 4 with Integrated channel. RTSSL33 3.5 x 3.5 with Integrated channel. An economical and eco-friendly support. 100% Recycled plastic bases. Available up to 10 long. RTS Classic LD CS Continuous Support RTSCS1516 Lightweight and versatile continuous support. Each base holds up to 200 lbs. Top of support is 3-3/4 above mounting surface. 16 /32 /48 RTS Solar Support RTSASF 100% Recycled rubber base provides a non-roofpenetrating solar panel support. A 120 degree hinge bracket enables a weight load of up to 1000 lbs. per support. RTS 48" Continuous Support RTSCS3100 Lightweight and versatile continuous support. Each base holds up to 200 lbs. Top of support is 5-3/8 above mounting surface. 10 /24 /36 /48 RTS Elevation Supports RTSES8 100% Recycled rubber base offers up to 1500 lbs. of support. 8 /12 /16 elevations
RTS - Duct Supports RTS has designed a flexible, strong, and non-roof-penetrating method to support duct work. Utilizing telescoping components and 12 gauge material our duct work supports are economical and offer significant strength and versatility. RTSDSAS48 Single support expandable width and height duct support. RTSDSAS48 - maximum expandable width of 48" with a 32" minimum. RTSDSAS36 - maximum expandable width of 36" with a 22" minimum. Allows flexibility in fixing elevation and width of duct work. RTSDSAD36 Double support adjustable width and height duct support. Allows for snugging duct work between two supports. RTSDSAD48- maximum expandable width of 48 with a 32 minimum. RTSDSAD36 - maximum expandable width of 36 with a 22 minimum. Allows flexibility in fixing elevation and width of duct work. RTSDSFS Single adjustable height support with fixed width duct support. Widths per customer specifications. Allows flexibility in fixing elevation of duct work. RTSDSFD Double adjustable height support with fixed width duct support. Widths per customer specifications. Allows flexibility in fixing elevation of duct work.
RTS- Pipe Hanger Supports RTS has designed a flexible, strong, and non-roofpenetrating method of supporting large pipe work on rooftops. Utilizing telescoping components and 12 gauge material our pipe supports offer significant strength and versatility coupled with economic feasibility. RTSPS1AH Single Hanging Pipe Support. Available with clevis or roller hanger support. Easily adjusts and sets elevation in minutes. RTSPS2AH Double Hanging Pipe Support. Available with clevis or roller hanger support. Easily adjusts and sets elevation in minutes. RTSPS4 Quad Hanging Pipe Support. Available with clevis or roller hanger support. Easily adjusts and sets elevation in minutes. Easy to work with and structurally sound.
RTS - Interior Supports RTS interior supports provide strong economical time saving options to hanging internal ceiling and wall supports. Turnkey supports allow for quick field installations. RTSWBS 30-36-42 Extended wall mount supports provide extra strength when supporting horizontally from a wall. 30 /36 /42 width RTSITP D12-D38 Prefabricated interior pipe roller supports allow for turnkey installation. All products arrive on site assembled and ready for installation. RTSWBA 6-12-18-24 Short wall mount supports provide extra strength when supporting horizontally from a wall. 6 /12 /18 /24 width RTSIM D10-18-24-30 Multi tier supports for anchoring to a wall or hanging from a ceiling. All supports come with preset shelf brackets. 10 /18 /24 /30 width RTSIT D12-D38 Prefabricated threaded rod interior trapeze supports. Available using: 3/8 or 1/2 threaded rod. Preset systems per user specifications. RTSIASD Interior single drop interior support for adjustable elevation. Telescopic tubing allows for accuracy up to the 1/16 of an inch when setting elevations. RTSITS D12-D38 Prefabricated interior clevis supports allow for turnkey installation. All products arrive on site assembled and ready for installation. Available with: 3/8 or 1/2 threaded rod RTSIATD Interior double drop interior trapeze support for adjustable elevation and easy repair. Telescopic tubing allows for accuracy up to the 1/16 of an inch when setting elevations.
Accessories RTS offers a variety of accessories to make your next project flow easier. We carry a large range of strut channels, fittings and clamps. RTS-A158 RTS-Cush-A-Clamp RTS-A238 RTS-GFA4HG916 RTS-A318 RTS-GFT4H916 RTS-C158 RTS-PCR RTS-C158T RTS-SN12 RTS-C1316 RTS-BC15
Accessories With large levels of stock and quick turnaround we can meet your next project s needs with outstanding service and quality. Clevis Hanger Fiberglass Strut Systems Clevis Roller Hardware Adjustable Roller Mustang Clamps Chair Type Roller Pipe Shield Plank Grating Cush-A-Therm All thread Base Plates
Power of the Sun Solar power is fast becoming the energy source of choice as we strive to develop more efficient, eco-friendly power solutions. RTS systems have been designed to meet the needs of Solar Power installations to ensure better stability, increased system life, and improved efficiency. RTS systems, a division of Eberl Iron Works, Inc. continues to develop products and services to meet our customer's needs today and tomorrow.
Eberl Iron Works, Inc. Eberl Iron Works, founded in 1923 by George and Frank Eberl, has grown from a small welding shop to a leading metal fabrication, distribution and installation group providing the highest quality products and service critical in today s market. The Eberl team s commitment to excellence is integral to our 86+ year old family owned and operated business. And, accountability is our pledge to our customers from the products we manufacture to the systems we install. Diversity is how we continue to find new and better ways to provide solutions for our wide range of customers. Eberl Iron Works, Inc. continues to develop metal fabrication products and services, expanding our distribution of framing and traffic safety products, as well as integrating additional installation capabilities to meet our customers most challenging needs. Metal Fabrication Division Unistrut Buffalo Division Systems Installation Division Traffic Safety Products Division RTS Rooftop Support Systems Division
We are proud to launch our newest product division, RTS Rooftop Support Systems. By integrating all of our current production and installation capabilities we can today provide customized systems for all your rooftop Pipe, HVAC Conduit, Duct Support, Solar PV, Crossovers, and Walkway systems. With five unique and distinct divisions, Eberl Iron Works, Inc. offers you a lot more than you imagine. Call us today to learn more about all of our products and services. 128 Sycamore Street Buffalo, New York 14204-1492 716-854-7633 1-800-285-3056 Fax: 716-854-1184 www.eberliron.com