Polymer Nanocomposites for Medical Applications

Similar documents
Bionanotechnology: The Use of Nanotechnology for Biomedical Applications

Nanospherical Ceramics: Resisting Bacteria Infection. While increasing bone cell functions, nanomaterials reduce bacteria functions. S.

DESIGN, FABRICATION AND EVALUATION OF 2D TO 3D NANOSTRUCTURED CERAMIC/POLYMER COMPOSITES FOR ORTHOPEDIC REGENERATION AND CONTROLLED DRUG DELIVERY

terials with at least one dimension in the nanoscale)

Nanocrystalline apatite: from fundamentals to bone substitute materials Industrial and business point of view

Directed Osteoblast Adhesion at Metal Particle Boundaries

Surface Construction Of Zn Doped Hydroxyapatite/mgf2 Multilayer Coatings For The Biomedical Mg Materials By A Novel Conversion/sol-gel Method

Tissue Engineered Medical Products

RESEARCH REPOSITORY.

Bone Tissue Engineering

A NANOFIBROUS HYDROGEL FOR BONE TISSUE ENGINEERING

Stem cells and tissue engineering

Lecture Outline. History. Purpose? Func:on of Bioscaffolds. Extracellular Matrix (ECM) 12/08/15

MANGAL ROY. Assistant Professor Department of Metallurgical and Materials Engineering

Characterisation of the osteogenic differentiation of human mesenchymal stem cells using Raman spectroscopy Lindsay L. McManus

Biocompatible coatings for corrosion control of magnesium alloys used as bio resorsable implants

Biomaterials in Medical device design

An Overview of Silicon Nitride as a Novel Biomaterial

Tissue Engineering: The art of growing body parts. Robby Bowles, Ph.D Cornell University

CHAPTER 8. orthopaedic and bone tissue engineering applications.

The advantages and use of ceramics in medicine

CoatingImplants. ResearchEngineer OrchidOrthopedicSolutions

Effects of TiO2 Contents on HA/TiO2 Composite Coating by Electrophoretic Deposition Lei Zhao, Huiping Shaoa, Hang Zheng

nano-scale surface morphology of magnesium anodized in a 10 m koh electrolyte

Quantum Dot Labeling of Stem Cells during Proliferation and Differentiation

PREPARATION AND CHARACTERIZATION OF HYDROXYAPATITE FROM FISHBONE

Nanotechnology Enabled In situ Sensors for Monitoring Health

CHAPTER 4 CONCLUSIONS AND FUTURE PERSPECTIVES

Lyset BOOST YOUR CELL CULTURE TODAY FOR THE EXPERIMENTS OF TOMORROW

Introduction [1] Introduction to the course; CEO and CLO

Applications in Cardiology Hollow Fiber Membranes and Applications

Nanosystems in regenerative medicine. Jöns Hilborn Materials Chemistry The Ångström Laboratory Uppsala University Sweden

Increased osteoblast adhesion on nanograined hydroxyapatite and tricalcium phosphate containing calcium titanate

Affinity. A Paradigm Shift in Skeletal Reconstruction

The University of North Texas Department of Materials Science & Engineering

A Comparative Study of Upconverting Nanoparticles Versus Lentiviral GFP Transduction for Labeling Mesenchymal Stem Cells

Structural Assessment of a Tissue Engineered Scaffold for Bone Repair

SCIENTIFIC ANALYSIS AND ENDORSEMENT OF NITTA CASINGS COLLAGEN GEL

3D In Vitro Living Systems for Biological Application

UNIT CELL PROCESSES UNDERLYING TISSUE ENGINEERING AND REGENERATIVE MEDICINE

Pittsburgh Tissue Engineering Initiative Annual Progress Report: 2011 Formula Grant

Articular Cartilage Engineering Using Human Mesenchymal Stem Cells and Nanostructured Biomaterials

Topologically ordered magnesium-biopolymer hybrid composite structures. Hyland a. Bag 92019, New Zealand. Zealand. Christchurch 8020, New Zealand

15 years of commercializing nanomedicine into real medical products

Workshop on Nanoscience and Catalysts March 2008, QAU, Islamabad Nanocomposites for Thermal management Applications

NANOMATERIALS SIG COMBINED CANDIDATE INFORMATION Officer Election For Chair: Hyunjoon Kong, PhD

Standards for biomaterials in tissue engineering

STUDY ON HYDROXYAPATITE COATING ON BIOMATERIALS BY PLASMA SPRAY METHOD

DAS FRAUNHOFER IKTS ALS INNOVATIVER PARTNER IM BEREICH BIO- UND MEDIZINTECHNIK

Australian Journal of Basic and Applied Sciences. Processing and Characterization of Porous Mg Alloy for Biomedical Applications

Tissue, Cell and Organ Engineering

OPTIMIZATION OF BIOCOMPATIBLE MATERIALS DEPOSITED BY HVOF THERMAL SPRAYING PROCESS

PREPARATION AND CHARACTERISATION OF CHITOSAN/NANO HYDROXYAPATITE COMPOSITES ABSTRACT INTRODUCTION

Nanodiamond-Based Therapeutic Delivery Films For the Treatment of Cancer and Inflammation

Kick-off meeting. Introducing: INNOVENT e. V. Barcelona, 3-5 March 2014

Additive Manufacturing of Hard Biomaterials

Freshman/Sophomore Junior Senior

BINDER JET ADDITIVE MANUFACTURING OF STAINLESS STEEL - TRICALCIUM PHOSPHATE BIOCOMPOSITE FOR BONE SCAFFOLD AND IMPLANT APPLICATIONS

REMEDI. Regenerative Medicine Institute (REMEDI) NUI Galway, Ireland GENERAL PRESENTATION. Director: Prof. Frank Barry

CV 1/9 NAZNIN SULTANA, PhD. Dr. Naznin SULTANA

University of Florida College of Engineering EDGE Course EMA 6590/6938: Advances in Biomaterials and Tissue Engineering for Healthcare

Supporting Information

In Vitro and In Vivo Comparison of New Biodegradable Magnesium-Based Implants for Orthopedic Uses.

International Journal of ChemTech Research CODEN (USA): IJCRGG ISSN: Vol.7, No.3, pp ,

3D Bioprinting - The Future Is Now!

Investigating bone mineral formed by different cell types in bone tissue engineering

Scaffolding Materials for Tissue Engineering. Parisa Bahrami, Hailun(Helen) Huang 1

Active nanomaterials for biomedical applications

Clinical and Research Challenges Associated with Spinal Fusion

Production and commercialisation of vascularized and customized bone Clinical trials, market authorisation Pre-clinical trials

Effects of Substrate Morphology on Osteoblastic Response to Thin Film Calcium Phosphate Coatings F. Horgan 1, B.J. Meenan 1 1

Cross-Linker Modulation to Maintain Phenotype of RGD-Alginate-Embedded Mesenchymal Stem Cells

PRINCIPLES AND PRACTICE OF TISSUE ENGNEERING:

Biomaterials in bone tissue regeneration and biofabrication: advances and challenges. Aldo R. Boccaccini

Empowering innovation.

Methods in Bioengineering: 3D Tissue Engineering

Change in Zeta Potential with Physicochemical Treatment of Surface of Anatase-form Titania Particles

(Refer Slide Time: 04:02)

HYDROXYAPATITE - CHITOSAN BIOCOMPOSITES

Ceramics, Glasses, and Glass-Ceramics

NORIAN DRILLABLE TECHNICAL MONOGRAPH. Fiber reinforced calcium phosphate phate bone void filler

Prof. Steven S. Saliterman

Preparation of calcium phosphate bioceramics from natural resources

Quantitative analysis of human mesenchymal stem cell alignment by electrospun polymer nanofibrous scaffolds

Regenerative and Immune Engineering Focus Area Upper-Level Engineering Courses updated October, 2018 For BME Class of 2021 and beyond

Regenerative and Immune Engineering Focus Area - Upper-Level Engineering Courses updated June, 2018 For BME Class of 2021 and beyond

Selection criteria for Biomaterials

WHITE PAPER: ATELO COLLAGEN. Product Number: FS22001, FS22002, FS22003, FS22004, FS22005, FS22006

ISTINYE UNIVERSITY INSTITUTE OF HEALTH SCIENCES DEPARTMENT OF STEM CELL AND TISSUE ENGINEERING (THESIS) COURSE DESCRIPTIONS

Medical Engineering (Biomedical Engineering, Clinical Engineering, Bioengineering) Medical Materials Science (Biomaterials) Dental Materials Science

Biomaterials. Third Edition

Symposium Biotronik High-Tech DRug Eluting Absorbable Metal Stent: dreaming the future! Didier Tchétché. Clinique Pasteur.

In-situ Preparation And Characterization Of Hydroxyapatite-porous Poly(vinyl Alcohol) Hydrogels For Articular Cartilage Repair

Effects of contact guidance and gravity on L929 cell orientation

Investigating the Mechanical Behaviors of Organic/Inorganic Composite Bone Scaffolds

Department of Production Engineering, PSG College of Technology, Coimbatore, India. b

POLY(LACTIC ACID)/HYDROXYAPATITE COMPOSITE FIBRES FOR 3D OSTEOCONDUCTIVE WOVEN SCAFFOLDS

applications J.C. Huang 1, J.S.C. Jang 2, C.H. Lin 1, C.H. Chen 3, C.H. Huang 1, R.F. Chuang 1 National Sun Yat-Sen University

3D Bioprinting - The Future Is Now!

Evaluation of Clindamycin encapsulated in PLA/PLGA nanoparticles

Transcription:

Department of Bioengineering Liu Research Group www. Liugroup.org Polymer Nanocomposites for Medical Applications Huinan Liu, Ph.D. Department of Bioengineering Interdisciplinary Materials Science and Engineering Program Bourns College of Engineering The Stem Cell Center Inland Empire Stem Cell Consortium University of California at Riverside Contact: HuinanLiu@engr.ucr.edu Faculty Website: http://www.engr.ucr.edu/faculty/bio/liu.html Research Overview and Multidisciplinary Collaborations Liu Research Group www. Liugroup.org Nanocomposites Ceramic Nanoparticles Biodegradable Metals Biodegradable Polymers/Hydrogels Biodegradable Materials & Nanostructured Interfaces Nanostructured Surfaces/Coatings Material Design, Synthesis & Characterization Implant/Device Fabrication & Evaluation Cellular Responses In vitro Assessment Nerve Controlled Drug Delivery Regenerative Medicine Bone Cartilage Ligament Infection In vivo Evaluation: Functionality in Animal Models Pre Clinical Models & Clinical Trials Medical Device & Implant Industry Design Objectives FDA Clinicians/Surgeons 1

Interface between Biomaterials and Cells Fascinating! Diversity and Complexity of Life at the Cellular Level Liu H. Nanocomposites for Orthopedic Tissue Regeneration and Drug Delivery: Promise and Challenge. VDM Verlag. ISBN 978-3639184228. 29. Can we control them? Cipriano AF, Sallee A, Guan R, Zhao Z, Tayoba M, Sanchez J, and Liu H. Investigation of Magnesium Zinc Calcium Alloys and Bone Marrow Derived Mesenchymal Stem Cell Response in Direct Culture. Acta Biomaterialia. 12: 298-321, 215. How Biomaterials Affect Cell Behaviors? Performance Composition Micro/Nano Structure Properties Synthesis/Processing Cell Behaviors Material Chemistry Mechanical Properties Surface Properties 2

Biomaterials and Cell Behaviors: Multiple Factors and Complexity Purity Composition Degradation products Material Chemistry Cell Behaviors Modulus/stiffness Strength Flexibility Fracture toughness Mechanical Properties Surface Properties Surface area Surface roughness Surface energy Hydrophilicity/hydrophobicity Surface features: size and shape Surface patterns: size, shape and orientation Environmental Factors In vitro variables: media, proteins, cells In vivo variables: anatomical locations, diversity (need for personalized medicine) Scale is Important at the Interface of Biomaterials and Cells A biomaterial is a (nonviable) material used in a medical device, intended to interact with biological systems Interactions between Biomaterials and Cells: Scale is Important Even if Other Factors are Constant Biomaterial Nano scale Micron scale Macro scale Biological Systems Protein level Cell level Tissue level Williams, D.F. (1987) Definitions in Biomaterials. Proceedings of a Consensus Conference of the European Society For Biomaterials, England, 1986, Elsevier, New York. 3

Osteoblast Functions: Scale is Important for Cells Calcium Concentration (microgram calcium/mg protein) 1 8 6 4 2 microns Conventional Titania 167 24 452 39 179 67 1 2 3 4 Alumina Titania Hydroxyapatite Glass Grain Size (nm) Culture medium = DMEM supplemented with 1% fetal bovine serum, 5 μg/ml L ascorbate and 1 mm b glycerophosphate. Culture time = 28 days. Values are mean ± SEM; n = 3; p <.1 (compared to respective conventional grain size ceramic). Webster TJ, Siegel RW, Bizios R. Enhanced functions of osteoblasts on nanophase ceramics. Biomaterials. 21: 183-181, 2. 1.3 6 4 2 4 2 6 microns 1.3 6 4 6 2 4 2 Nanophase Titania Cell Adhesion on Surface: Scale is Important Liu H and Webster TJ. Nanomedicine for Implants: A Review of Studies and Necessary Experimental Tools. Biomaterials. 28(2): 354-369, 27. (PMID: 1749982) 4

Fibronectin Interactions with Nano-scale Surfaces: Scale is Important for Proteins a b AFM images of fibronectin (5 µg/ml) adsorbed to PLGA surface with (a,b) 5 nm, (c,d) 2 nm and (e,f) 1 nm spherical features. Scan size=75 nm X 75 nm Scale bars=15 nm. Little to no interconnectivity A higher degree of interconnectivity c d Well spread with a large amount of interconnectivity e f Miller DC, Haberstroh KM, Webster TJ.PLGA nanometer surface features manipulate fibronectin interactions for improved vascular cell adhesion. J Biomed Mater Res A. 27 Jun 1;81(3):678-84. How can we use this idea to improve biomaterials for tissue regeneration? 5

Nanocomposites for Bone Regeneration Surface Properties and Cell Functions Cell Interactions with 3D Structures Drug Delivery Controlled Degradation Mechanical Properties Ceramic/Polymer Nanocomposites Nanofabrication: 2D and 3D structures Osteoblast Adhesion on Nanocomposites PTCa PLGA PTCa: Agglomerated PTCd: Dispersed Magnification bars: 1 µm PTCd TCS 18H t L 2 D ( p L) g Liu H, Slamovich EB and Webster TJ. Increased Osteoblast Functions among Nanophase Titania/Poly(lactide-co-glycolide) Composites of the Highest Nanometer Surface Roughness. Journal of Biomedical Materials Research. 78A(4): 798-87, 26. Surface Roughness Osteoblast Adhesion 14 12 1 8 6 4 2 18 16 14 12 1 8 6 4 2 nm PLGA PTCa PTCd TCS Bone Cells/cm 2 PLGA PTCa PTCd TCS 6

Nanocomposites: 3D Printed Structures Liu H and Webster TJ. Enhanced Biological and Mechanical Properties of Well- Dispersed Nanophase Ceramics in Polymer Composites: From 2D to 3D Printed Structures. Materials Science and Engineering: C. 31(2): 77-89, 211. SEM micrograph of 3D nanocomposite structure 3D printed nanocomposite using Optomec s Aerosol Jet SEM micrograph of a magnified region of the 3D printed nanocomposite surface Bar=1 µm Bar=2 nm Promoted Osteoblast Infiltration into 3D Nanocomposites Cells SEM micrograph of an osteoblast adhering on the nanocomposite surface. Bar=1 µm. Confocal micrograph of osteoblasts adhering into porous structures of 3D nanocomposite scaffold. Bar=15 µm. Liu H and Webster TJ. Enhanced Biological and Mechanical Properties of Well-Dispersed Nanophase Ceramics in Polymer Composites: From 2D to 3D Printed Structures. Materials Science and Engineering: C. 31(2): 77-89, 211. 7

Human Mesenchymal Stem Cells (hmsc) Adhesion and Osteogenic Differentiation Nanophase HA_PLGA: 3D Interconnected Glass Control: 2D flat hmsc Adhesion Density (cells/cm 2 ) Calcium Deposition (µg/cm 2 ) 14 12 1 8 6 4 2 2 15 1 5 # # 1 2 3 4 5 6 7 8 9 1 HA_Ps_PLGA 2 HA_PLGA 3 HA_Ps 4 HA 5 PLGA_P 6 PLGA 7 DIF 7c Peptide 8 Glass 9 PSTC Lock JY, Liu H. Nanomaterials Enhanced Osteogenic Differentiation of Human Mesenchymal Stem Cells Similar to a Short Peptide of BMP-7. International Journal of Nanomedicine. 6: 2769-2777, 211. hmscs: ALP Activity and Calcium Deposition Lock JY, Nguyen TY, and Liu H. Nanophase Hydroxyapatite and Poly(lactide-co-glycolide) Composites Promote Human Mesenchymal Stem Cell Adhesion and Osteogenic Differentiation In Vitro. Journal of Materials Science: Materials in Medicine. 23(1): 2543-2552, 212. 8

Mechanical Properties of Polymer Nanocomposites a: agglomerated d: dispersed Tensile Modulus (MPa) 4 3 2 1 Tensile Strength (MPa). PLGA PTCa PTCd PLGA PTCa PTCd Values are mean ± SEM; n = 3; p <.5comparedtoPLGA;p <.5comparedtoPTCa..3.2.1 Tensile Strength at Yield UTS Liu H and Webster TJ. Mechanical Properties of Dispersed Ceramic Nanoparticles in Polymer Composites for Orthopedic Applications. International Journal of Nanomedicine. 5: 299-313, 21. (PMID: 2463945) Next-Generation Load-Bearing Implants Biodegradable and Bioresorbable Fracture Implantation Healing Restored Bone Conventional: Permanent metallic implant (e.g., titanium) Revision surgery needed to remove implant Bioresorbable Metallic Fixation Devices Control Cellular Functions, Implant Degradation and Tissue Interactions Tissue Regenerated and Implant Disappeared 9

HA Nanoparticles: the Coating Material for Bone Interface Nanophase Hydroxyapatite under SEM HA: Ca 1 (PO 4 ) 6 (OH) 2 Size range: 19 to 58 nm Average particle size: 34 nm Tian Q, and Liu H. Electrophoretic Deposition and Characterization of Nanocomposites and Nanoparticles on Magnesium Substrates. Nanotechnology. 26(17): 17512, April 215. (PMID: 25854275) Translational Research From Bench top to Bedside Multifunctional Nanocoatings for Implants NanoSpray System for Medical Coatings MultiCare Nanocoating Dental Implant Hip Implants Liu H, Jiang W and Malshe A. Novel Nanostructured Hydroxyapatite Coating for Dental and Orthopedic Implants. JOM. 61(9): 67-69, 29. 1

Nanophase Hydroxyapatite Coating on Mg Alloys 2.5 2 1.5 KCnt 1.5 O Mg P Ca/P Ratio =1.6 Ca Close to HA Ca/P Ratio =1.66 C Ca. 1. 2. 3. 4. 5. 6. 7. 8. 9. 1. Energy kev SEM image (25x) nha coated Mg EDS analysis of nha coated Mg Iskandar ME, Aslani A, and Liu H. The Effects of Nanostructured Hydroxyapatite Coating on the Biodegradation and Cytocompatibility of Magnesium Implants. Journal of Biomedical Materials Research Part A. 11(8): 234-2354, 213. Nanocomposite Coating on Biodegradable Magnesium Alloys 5 nm Serve as Dual Functions: Promote Bone Cell Adhesion and Reduce Substrate Degradation Rate Tian Q, and Liu H. Electrophoretic Deposition and Characterization of Nanocomposites and Nanoparticles on Magnesium Substrates. Nanotechnology. 26(17): 17512, April 215. (PMID: 25854275) 11

Magnetic Nanocomposites 2 μm A B t= s t=1 s t=1.5 s t=2 s t= s t=3 s Magnetic responses of the synthesized MagGel and magnetic nanoparticles to a magnet. (A) MagGel in MES buffer (unit of numbers in red: mm) and (B) magnetic nanoparticles in DI water. Blue arrows indicate the object movement direction before next time point. Zhang N, Lock J, Sallee A, and Liu H. Magnetic Nanocomposite Hydrogel for Potential Cartilage Tissue Engineering: Synthesis, Characterization, and Cytocompatibility with Bone Marrow Derived Mesenchymal Stem Cells. ACS Applied Materials and Interfaces. Accepted 8/28/215. DOI: 1.121/acsami.5b6939. Magnetic Guidance http://pubs.acs.org/doi/abs/1.121/acsami.5b6939 am5b6939_si_1.avi Zhang N, Lock J, Sallee A, and Liu H. Magnetic Nanocomposite Hydrogel for Potential Cartilage Tissue Engineering: Synthesis, Characterization, and Cytocompatibility with Bone Marrow Derived Mesenchymal Stem Cells. ACS Applied Materials and Interfaces. Accepted 8/28/215. DOI: 1.121/acsami.5b6939. 12

Synthesis of Magnetic Nanocomposites B PVA Magnetic Nanoparticles n 5 nm Hybrid Gel 4-arm PEG Hyaluronic Acid (HA) Zhang N, Lock J, Sallee A, and Liu H. Magnetic Nanocomposite Hydrogel for Potential Cartilage Tissue Engineering: Synthesis, Characterization, and Cytocompatibility with Bone Marrow Derived Mesenchymal Stem Cells. ACS Applied Materials and Interfaces. Accepted 8/28/215. DOI: 1.121/acsami.5b6939. Type II Collagen Degradation of Magnetic Nanocomposites A Day 2 4 6 8 1 12 14 18 21 B Day 1 3 7 9 11 13 15 19 21 Zhang N, Lock J, Sallee A, and Liu H. Magnetic Nanocomposite Hydrogel for Potential Cartilage Tissue Engineering: Synthesis, Characterization, and Cytocompatibility with Bone Marrow Derived Mesenchymal Stem Cells. ACS Applied Materials and Interfaces. Accepted 8/28/215. DOI: 1.121/acsami.5b6939. 13

Cytocompatibility of Magnetic Nanocomposites 5 μm MagGel Control Hybrid Gel Magnetic Nanoparticles Summary Polymer nanocomposites are engineered to control biological interactions at the cellular level at the protein level at the tissue level, hopefully in the future studies Polymer nanocomposites with well-dispersed HA nanoparticles promote osteogenic differentiation of BMSCs provide dual functions on biodegradable Mg substrates - modulate bone integration and implant degradation Magnetic nanocomposites are engineered for remote magnetic guidance biodegradable cytocompatible with BMSCs future studies on in vivo assessment 14