Innova Tile by S.Anselmo, introduces the terracotta ventilated façade system. is a double wall extruded engineered terracotta clay panel system with a central air space to increase insulating value and reduce weight. The upper and lower panel edges are designed and manufactured with continuous kerf to install the panels on the continuous horizontal grid hanging system GridWorxTM. panels are available in a variety of standard sizes with horizontal and vertical orientations. can be specified in 5 color groups with 15 clay colors and 15 standard glazes in smooth finish. Custom sizes, colors and finishes are available at additional cost and lead time.
The new terracotta panels are manufactured by InnovaTile by S.Anselmo, I t a l y s l e a d i n g m a n u f a c t u r e r o f t e r r a c o t t a c o n s t r u c t i o n m a t e r i a l s. B y using an extruded top and bottom continuous kerf detail engineered to fit the patented Gridworx façade anchoring system by Precision Wall Systems of Dallas, Texas. provides a safe and reliable mechanical interface and durable light weight installation. By using the proven Gridworx continuous horizontal anchor system, architects and specifiers can achieve high performance ventilated façades that meet the new ASHRAE 90.1 continuous insulation standard. The ability to use the same Gridworx hanging system to install both large and smaller format terracotta façade panels, and to combine terracotta with other materials such as calcium silicate, limestone and granite across an elevation, opens up a wide range of façade possibilities for creative designers. There is a versatile palette of 15 traditional and contemporary clays in addition to 15 standard and unlimited custom glazes. Innova Tile by S.Anselmo has sophisticated in-house extruding facilities to produce numerous precision standard modular formats that minimize waste and offer extensive design flexibility to the designer. Unlike most other terracotta cladding systems, does not require panels to be interlocked or lapped in any way. The Gridworx hanging system provides for a unique non-sequential installation with both sealed and ventilated façade joint options. The Gridworx hanging system is American made, engineered and warrantied. This means that the erection of a high performance -Gridworx façade is a simplistic, and straightforward procedure for the installation contractor and it enables those responsible for long term maintenance of the building to access the structure or systems behind any individual façade panel with ease.
TerraGrid Standard Panel Standard Panel TerraGrid Standard Standard Panels Panels are designed are designed to fill the to fill flatthe flat uninterrupted sections sections of the of façade. the façade. Technical data Standard Panel Technical Data Standard Panel Material: Method of Manufacture: Fired terracotta clay Extrusion Piece type Thickness Colors Standard Panel 1-3/16 see page 7 Weight Finish 9.2 lbs/ft 2 smooth Tensile Strength: ASTM C-67 2,756 psi ISO 10545-4 (19 N/mm 2 ) Thermal Expansion: ASTM C-372.00060% ISO 10545-8 (<6 x 10º Cº -1 ) Freeze-Thaw Resistance: ASTM C-1026 passed ISO 10545-12 (guaranteed) Chemical Resistance: ASTM C-67 passed Thermal Shock Resistance: ASTM C-484 passed Water Absorption: ASTM C-67.0167% ISO 10545-8 (6 10%) Dimensions Tolerances see chart height: +/- 1/16 square: +/-.5% length: +/- 1/16 straightness: +/-.5% thickness: +/- 1/16 flatness: +/-.5% Dimension Chart Standard Panel Dimension Chart Standard Panel
TerraGrid Corner Panel Corner Panel Corner Panels are designed to make the TerraGrid transitions from Corner the Panels flat uninterrupted are designed to sections make the of transitions your façade from at outside the flat corners. uninterrupted Corner sections Panels of your are façade manufactured at outsideat 45 corners. degree angles Corner Panels and installed are manufactured to create at a quirk 45 degree miter angles and installed to create a quirk miter assembly. assembly. Data Standard Panel Technical data Corner Panel Material: Method of Manufacture: Fired terracotta clay Extrusion Piece type Thickness Colors Corner Panel 1-3/16 see page 7 Weight Finish 9.2 lbs/ft 2 smooth Tensile Strength: ASTM C-67 2,756 psi ISO 10545-4 (19 N/mm 2 ) Thermal Expansion: ASTM C-372.00060% ISO 10545-8 (<6 x 10º Cº -1 ) Freeze-Thaw Resistance: ASTM C-1026 passed ISO 10545-12 (guaranteed) Chemical Resistance: ASTM C-67 passed Thermal Shock Resistance: ASTM C-484 passed Water Absorption: ASTM C-67.0167% ISO 10545-8 (6 10%) Dimensions Tolerances see chart height: +/- 1/16 square: +/-.5% length: +/- 1/16 straightness: +/-.5% thickness: +/- 1/16 flatness: +/-.5% Dimension Chart Corner Panel Dimension Chart Corner Panel
TerraGrid Deflection Panel Deflection Panel TerraGrid Deflection Panels are are designed to honor to honor the the Structural design design of the of building the building envelope envelope by allowing by for floor allowing deflection for while floor maintaining deflection horizontal while maintaining joint dimensions horizontal joint between dimensions panels floor between to floor. panels Deflection floor panels to floor. are also used Deflection at window and panels door are heads, also wall used to soffit at window transitions and and door other heads, architectural wall details to soffit requiring transitions the hanging and other system architectural to be away from the edge of the panel. details requiring the hanging system to be away from the edge of the panel. Technical Data data Deflection Panel Panel Material: Method of Manufacture: Fired terracotta clay Extrusion Piece type Thickness Colors Deflectiom Panel 1-3/16 see page 7 Weight Finish 9.2 lbs/ft 2 smooth Tensile Strength: ASTM C-67 2,756 psi ISO 10545-4 (19 N/mm 2 ) Thermal Expansion: ASTM C-372.00060% ISO 10545-8 (<6 x 10º Cº -1 ) Freeze-Thaw Resistance: ASTM C-1026 passed ISO 10545-12 (guaranteed) Chemical Resistance: ASTM C-67 passed Thermal Shock Resistance: ASTM C-484 passed Water Absorption: ASTM C-67.0167% ISO 10545-8 (6 10%) Dimensions Tolerances see chart height: +/- 1/16 square: +/-.5% length: +/- 1/16 straightness: +/-.5% thickness: +/- 1/16 flatness: +/-.5% Dimension Chart Chart Deflection Deflection Panel Panel
Deflection Corner TerraGrid Deflection Corner TerraGrid Deflection Corners Corners are designed are designed to honor to the honor the structural design of the of the building building envelope envelope by allowing by allowing for floorfor deflection floor deflection while maintaining while maintaining horizontal horizontal joint dimensions joint dimensions between panels panels floor floor to floor. to floor. Deflection Deflection Corners Corners are used are with used Deflection Panels at outside corners. Deflection Corners are with Deflection Panels at outside corners. Deflection available in left and right and top and bottom orientations. Corners are available in left and right and top and bottom orientations. Technical Data Data Deflection Deflection Corner Corner Material: Method of Manufacture: Fired terracotta clay Extrusion Piece type Thickness Colors Deflectiom Corner 1-3/16 see page 7 Weight Finish 9.2 lbs/ft 2 smooth Tensile Strength: ASTM C-67 2,756 psi ISO 10545-4 (19 N/mm 2 ) Thermal Expansion: ASTM C-372.00060% ISO 10545-8 (<6 x 10º Cº -1 ) Freeze-Thaw Resistance: ASTM C-1026 passed ISO 10545-12 (guaranteed) Chemical Resistance: ASTM C-67 passed Thermal Shock Resistance: ASTM C-484 passed Water Absorption: ASTM C-67.0167% ISO 10545-8 (6 10%) Dimensions Tolerances see chart height: +/- 1/16 square: +/-.5% length: +/- 1/16 straightness: +/-.5% thickness: +/- 1/16 flatness: +/-.5% Dimension Chart Chart Deflection Deflection Corner Corner
Innova Tubes TerraGrid Terra Tubes TerraGrid Terra Innova Tubes Tubes are are designed designed as solar as or solar sunor sun screens. screens. They They are are assembled assembled using using aluminum aluminum tubes tubes inserted inserted in in the the cavity of the Terra Tube Tube extrusion. extrusion. The The two two profiles profiles provide provide the ability the to ability produce to varied produce patterns varied of patterns light and shade of light in and frontshade in of front windows. of windows. Terra Tubes Innova can Tubes combined can be with combined other TerraGrid with other TerraGrid panels creating panels interesting creating surfaces interesting on the surfaces building s on façade. the building s façade. Technical Data Data Terra Innova Tube Tube Material: Method of Manufacture: Fired terracotta clay Extrusion Piece type Thickness Colors Terra Tube 2-3/8 see page 7 Weight Finish 3.3 lbs/ft smooth 5.8 lbs/ft Tensile Strength: ASTM C-67 2,756 psi ISO 10545-4 (19 N/mm 2 ) Thermal Expansion: ASTM C-372.00060% ISO 10545-8 (<6 x 10º Cº -1 ) Freeze-Thaw Resistance: ASTM C-1026 passed ISO 10545-12 (guaranteed) Chemical Resistance: ASTM C-67 passed Thermal Shock Resistance: ASTM C-484 passed Water Absorption: ASTM C-67.0167% ISO 10545-8 (6 10%) Dimensions Tolerances see chart height: +/- 1/16 square: +/-.5% length: +/- 1/16 straightness: +/-.5% thickness: +/- 1/16 flatness: +/-.5% Dimension Chart Terra Innova Tube Tubes
Dimension Chart Standard sizes standard size chart pdf or jpeg. FILL PAGE
Color Chart Red Clay Brown Clay Brushed Natural
Color Chart Ochre Clay Brushed Natural Colored Clay
Color Chart Color Glaze
Innova Tile Inc. 7620 Washington Avenue Houston, Texas 77007 info@innovatile.com 1(800)358-7963 www.innovatile.com