02 Stainless Steel
Rittal The System. The whole is more than the sum of its parts. The same is true of Rittal The System. With this in mind, we have bundled our innovative enclosure, power distribution, climate control and IT infrastructure products together into a single system platform. Complemented by our extensive range of software tools and global service, we create unique added value for all industrial applications: Production plant, test equipment, facility management and data centres. Following our simple principle, faster better worldwide, we combine innovative products with efficient service for optimum results. Faster with our Rittal The System. range of modular solutions, which guarantees fast planning, assembly, conversion and commissioning thanks to system compatibility. Better by being quick to translate market trends into products. In this way, our innovative strength helps you to secure competitive advantages. Everywhere thanks to global networking across 50 locations. Rittal has over 60 subsidiaries, more than 250 service partners and over,000 service engineers worldwide. For more than 50 years, we have been on hand to offer advice, assistance and product solutions. Stainless Steel 03
Page 6 : Enclosure: Stainless Steel Door: Stainless Steel, all-round foamed-in PU seal Mounting plate: Sheet Steel Locks: Die-cast zinc Surface finish: Enclosure and door: Brushed, grain 20 Mounting plate: Zinc-plated Locks: Nickel-plated Protection category: See tables. Enclosure with door(s) Cam lock or 3-point lock system (for AE 07.X00) with double-bit i nsert Mounting plate T B H F G Compact enclosures AE Width (B) mm Packs of 200 300 380 380 300 380 Height (H) mm 300 300 300 300 380 380 Depth (T) mm 55 20 55 20 20 20 Mounting plate width (F) mm 62 25 33 33 275 33 Mounting plate height (G) mm 275 275 275 275 33 355 Model No. AE 979000 97900 979003 979028 979005 97907.30 (AISI 30).0 (AISI 36L) The above sizes are available on request Door Weight (kg). 6.9 7. 8. 8. 9.8 Protection category IP 66 to IEC 60 529, Rails for interior installation Rain canopy.30 (AISI 30) Wall mounting bracket Pole clamp Cam lock.0 (AISI 36L).30 (AISI 30).0 (AISI 36L) Wall angle.30 (AISI 30) Standard _ 2373.20 _ 2373.20 2373.20 2373.20 270.000 233.500 236.000 233.500 27.000 233.500 272.000 233.500 236.000 233.500 272.000 233.500 2583.00 2583.00 2583.00 2583.00 2583.00 2583.00 0 Stainless Steel
Compact enclosures AE Width (B) mm Height (H) mm Depth (T) mm Mounting plate width (F) mm Mounting plate height (G) mm Model No. AE Door Weight (kg) Protection category.30 (AISI 30).0 (AISI 36L) Packs of 600 380 20 59 355 97900.6 500 500 20 9 70 979009 500 500 300 9 70 97909 600 600 20 59 570 979007 600 760 20 59 730 979030 The above sizes are available on request 5.7 8. 23.5 IP 66 to IEC 60 529, complies with NEMA X 30.2 760 760 300 70 730 97908 2.5 Rails for interior installation Rain canopy.30 (AISI 30) Wall mounting bracket.30 (AISI 30).0 (AISI 36L) Wall angle.30 (AISI 30) Pole clamp Cam lock.0 (AISI 36L) Standard 2373.20 273.000 2583.00 2373.20 2362.000 2583.00 2373.300 _ 2583.00 2373.20 273.000 273.000 2583.00 2373.20 273.000 2583.00 2373.300 27.000 233.500 233.500 233.500 233.500 233.500 233.500 2583.00 Width (B) mm Packs of 800 800 Height (H) mm 000 200 Depth (T) mm 300 300 Mounting plate width (F) mm 739 70 Mounting plate height (G) mm 955 55 Model No. AE 97900 979023.30 (AISI 30).0 (AISI 36L) The above sizes are available on request 3-point lock system Door (s) Weight (kg) 52.9 6.5 Protection category IP 66 to IEC 60 529, complies with NEMA X Rails for interior installation Rain canopy Wall mounting bracket Wall angle Cam lock.0 (AISI 36L).30 (AISI 30).0 (AISI 36L) Standard 2373.300 275.000 2583.00 2373.300 275.000 233.500 233.500 2583.00 _ Stainless Steel 05
Wall mounting bracket For the attachment of KL, EB, BG, AE, CM and EL enclosures, TP consoles as well as DK wallmounted distributors and small fibre-optic distributors. Assembly parts for mounting on the enclosure. 20 5 5 29 Ø 0.2 A 5 Stainless Steel.30 (AISI 30) Stainless Steel.0 (AISI 36L) Wall distance (A) mm Packs of 0 0 Model No. SZ 233.500 20 Wall angle For compact enclosures (additional holes required in the enclosure). 20 Assembly parts for mounting on the enclosure. 2 35 3 90 Stainless Steel.30 (AISI 30) Colour Packs of Model No. SZ 2583.00 26 6.5 R 3 70 Rails for interior installation for AE For mounting in the enclosure, no machining required. Suitable for all-round mounting on the sides, base and roof areas. Variable with 2 rows of system punchings, creates additional mounting space e.g. for: TS punched section with mounting flange Enclosure lights Door-operated switch Door stay Cable conduit holder For enclosure depth mm Packs of Model No. SZ 20 2373.20 250 2373.250 300 2373.300 : Sheet Steel Surface finish: Zinc-plated Note: Other mounting options: Mounting plates, locatable Mounting plates, screw-fastening, large Mounting plates, screw-fastening, small Mounting brackets Cam lock With double-bit insert Packs of Model No. SZ Made entirely from Stainless Steel.0 (AISI 36L) 06 Stainless Steel
Rain canopies for AE, CM Reliable protection for outdoor siting with water run-off to the rear. Easily retro-fitted Assembly parts. for AE, Stainless Steel version : Stainless Steel.30 (AISI 30) Surface finish: Brushed, grain 20 T Note: For outdoor siting, we generally recommend a rain canopy above the enclosure or the gap between the door or screw-fastened rear panel and the enclosure, in order to protect against water and UV radiation. The tests of IP protection categories for water pro-tection (2nd code number to IEC 60 529) cannot be compared with an enclosure sited outdoors or under similar conditions. Upon request, rain canopies of Sheet Steel, Stainless Steel or Aluminum can also be produced for other enclosures. 50 B 5.5 25 T2 38.25 23 23 For Enclosure width mm Enclosure depth mm Model No. SZ 200 55 270.000 300 20 236.000 380 55 27.000 380 20 272.000 500 20 2362.000 600 20 273.000 760 300 27.000 800 300 275.000 B = Enclosure width + mm T = Enclosure depth + 25 mm T2 = Enclosure depth 90 mm, from enclosure width 600 mm: Enclosure depth 5 mm Pole clamp for KL, EB, BG, AE, KS and CS wall-mounted enclosures For reliable, convenient fastening to round or square poles. For pole diameter/size: Ø from 0 to 90 mm from 50 to 50 mm : Mounting angles, clamping section: Sheet Steel Clamping strap: Stainless Steel.30 (AISI 30) Packs of Model No. SZ set Surface finish: Mounting angle, clamping section: Zinc-plated 2 mounting angles, 600 mm long clamping sections 2 clamping straps clamping brackets screws and captive nuts M8 for mounting on the enclosure. Door stay To secure the door in the open position. For Assembly Packs of All AE Stainless Steel enclosures Model No. Top 259.000 ) With AE Stainless Steel, only in conjunction with perforated mounting strips. Stainless Steel 07
Enclosures Power Distribution Climate Control IT Infrastructure Software & Services RITTAL India Pvt Ltd. No. 23 & 2 KIADB Industrial Area Veerapura Doddaballapur - 56 203 Bengaluru District Tel: +9(0)80 3372 0700 Fax: +9(0)80 3372 0866 Email: info@rittal-india.com Website: www.rittal-india.com