Accredited Laboratory

Similar documents
CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION

BIOCOMPATIBILITY IN THIS SECTION EXPERT SOLUTIONS FOR PRODUCT DEVELOPMENT. Cytotoxicity Testing

BIOCOMPATIBILITY IN THIS SECTION. Cytotoxicity Testing

Medical Device Testing. Andrew Makin, MSc, ERT, MRSB Scientific Director CiToxLAB Scantox, Denmark

P103b Annex: Policy on Estimating Measurement Uncertainty for Life Sciences Testing Labs

Public Interest Incorporated Foundation BioSafety Research Center

Testing and Evaluation Strategies for the Biological Evaluation of Medical Devices submitted for CE Mark and FDA Approval

Our Business. in vitro / in vivo. in vitro / in vivo ADME. in vitro / in vivo. Toxicology. Cell Battery V79. Analytical Services. Service.

FDA/ISO MHLW-Japan USP Microbiology. 15 Wiggins Avenue, Bedford, MA

4 Principles for the valuation of the biological evaluation of materials and medical devices

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

Biological evaluation of medical devices --

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

Accredited Laboratory A2LA has accredited WUXI APPTEC, INC. Marietta, GA for technical competence in the field of

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

ANALYTICAL CHEMISTRY TESTING: Outsourced: Upcoming Projects: Names /Contracts for this area CDA / MSA Audited:

Biocompatibility, FDA and ISO 10993

SAFETY RESEARCH INSTITUTE FOR CHEMICAL COMPOUNDS CO., LTD.

ISO Definition of a Medical Device

ATI FLAT ROLLED PRODUCTS Brackenridge, PA for technical competence in the field of

ISO Definition of a Medical Device

Medical Devices INNOVATIVE SOLUTION FOR THE HEALTHCARE

Deborah Rice, CMAR. BAXTER HEALTHCARE, Round Lake, IL

SERVA DNA Stain Clear G Cat. No

510(k) Summary. January 10, 2014

Colorants in Medical Devices:

GB/T / ISO :2007

ISO INTERNATIONAL STANDARD. Biological evaluation of medical devices Part 5: Tests for in vitro cytotoxicity

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. DNV GL PVEL, LLC Fifth Street Berkeley, CA Mr. John Watts Phone: ELECTRICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

S2(R1) Revision of the Guidance on Genotoxicity Testing and Data Interpretation for Pharmaceuticals Intended for Human Use

ISO EP, USP ISO EP, USP ISO EP, USP ISO EP, USP ISO MSDA ISO MSDA

Archived Content. This content was archived on February 4, 2017.

United States Pharmacopeia: Revision Process for USP Biocompatibility General Chapters <87>, <88> and <1031>

Legacy Evaluations. Ensuring your commercialized products meet the current regulations

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. TSP / USB LABORATORY South Main Street Houston, TX Lester Burgess Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. Q LABORATORIES, INC Harrison Avenue Cincinnati, OH David Goins Phone:

Risk Management of Biological Evaluation What s the Future for ISO 10993?

BIOCOMPATIBILITY TESTING AT PACIFIC BIOLABS

Guidelines and criteria for seeking approval to conduct clinical trials in Ayurveda, Siddha and Unani system.

Midori Green Advance DNA Stain Safety Report

Cooperation in the field of toxicology, analytics, R&D and production

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Experimental techniques: The Skin; Biocompatibility. Dr. Gábor Erős

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. WN GLOBAL LABORATORY South Main Street Houston, TX Lester Burgess Phone:

YY/T Translated English of Chinese Standard: YY/T

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. Q LABORATORIES, INC Harrison Avenue Cincinnati, OH David Goins Phone: CHEMICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. Q LABORATORIES, INC Harrison Avenue Cincinnati, OH David Goins Phone: CHEMICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. WN GLOBAL LABORATORY South Main Street Houston, TX Lester Burgess Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

ISO INTERNATIONAL STANDARD

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

ISO INTERNATIONAL STANDARD. Biological evaluation of medical devices Part 2: Animal welfare requirements

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

MATERIAL SAFETY DATA SHEET

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Safety Testing of Chinese Hamster Ovary (CHO) Cell Banks

Biological evaluation of medical devices. Part 6: Tests for local effects after implantation

Biocompatibility: a risk based approach

Inspections, Compliance, Enforcement, and Criminal Investigations

A Life Cycle Approach to Raw Material Qualification for Cell and Gene Therapy Products

Safety Testing of Chinese Hamster Ovary (CHO) Cell Banks

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

ISO INTERNATIONAL STANDARD. Biological evaluation of medical devices Part 5: Tests for in vitro cytotoxicity

An NGO Perspective on Regulatory Acceptance of Non-animal Data and Related Issues. Martin Stephens, Ph.D. The Humane Society of the United States

MATERIAL SAFETY DATA SHEET

ISO INTERNATIONAL STANDARD

Test Report. The Report of Acute Oral Toxicity Test

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. SEMBLEX CORPORATION 388 Carol Lane Campus Elmhurst, IL Ray Lafferty Phone: MECHANICAL

Standard Guide for Determining the Impact of Extractables from Non-Metallic Materials on the Safety of Biotechnology Products 1

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Use of International Standard ISO , "Biological Evaluation of Medical Devices Part 1: Evaluation and Testing"

MATERIAL SAFETY DATA SHEET

ISO/TS TECHNICAL SPECIFICATION

ONAMER M. PRESERVATIVE and ANTIMICROBIAL ONAMER

JUL Sponsor/Applicant Name and Address Penumbra, Inc Harbor Bay Parkway Alameda, CA 94502, USA

Satisfying ISO and US FDA Biocompatibility requirements for Breathing Gas Pathways in Healthcare Application

ISO INTERNATIONAL STANDARD. Biological evaluation of medical devices Part 17: Establishment of allowable limits for leachable substances

Services for Medical Devices. Expert solutions for product development from concept to commercialization

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Leachable and Extractable Testing

SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006. : Fazor. Version 2.0 Revision Date Print Date

SAFETY DATA SHEET according to Regulation (EC) No. 1907/2006 : FAZOR 60 SG. Version 2.0 Revision Date Print Date

SAFETY DATA SHEET <#####> RABON 50% WETTABLE POWDER INSECTICIDE Version 1.1 Revision Date 02/20/2013

ISO INTERNATIONAL STANDARD

NAMSA is a Medical Research Organization (MRO), accelerating product development

IMPLANT LINE PRODUCT GUIDE

Supplies and Reagents

SCOPE OF ACCREDITATION TO ISO/IEC

PHARMACEUTICAL TESTING

HDGreen Safe DNA Dye Safety Test Reports

Transcription:

Accredited Laboratory A2LA has accredited St. Paul, MN for technical competence in the field of Biological Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 6 th day of December 2016. President and CEO For the Accreditation Council Certificate Number 2785.01 Valid to January 31, 2019 For the tests to which this accreditation applies, please refer to the laboratory s Biological Scope of Accreditation.

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 2540 Executive Drive St. Paul, MN 55120 Deborah Erickson Phone: 1-888-794-0077 BIOLOGICAL Valid To: January 31, 2019 Certificate Number: 2785.01 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following biological tests: In-Vitro Tests Bacterial Mutagenicity Test (Ames Assay) In Vitro Mouse Lymphoma Assay The In Vivo Mouse Micronucleus Assay In Vitro Chromosome Aberration Analysis Using Chinese Hamster Ovary (CHO) Cells Complement Activation SC5b-9 (TCC) Assay Complement Activation C3a Assay Platelet and Leukocyte Count Assay In Vitro Hemocompatability Assay Partial Thromboplastin Time (PTT) Assay ASTM Hemolysis Assay Prothrombin Time Assay NIH Hemolysis Testing: Extract Method and Direct Contact Methods Agarose Overlay Cytotoxicity Test Extract Colony Assay Cytotoxicity Test Direct Cell Contact Cytotoxicity Test Minimum Essential Medium (MEM) Elution Assay MTT Assay Neutral Red Uptake Assay ISO 10993-3: Current Edition, Biological evaluation of medical devices - Part 3: Tests for genotoxicity carcinogenicity and reproductive toxicity ISO 10993-4: Current Edition, Biological evaluation of medical devices - Part 4: Selection of test for interactions with blood ISO 10993-5: Current Edition, Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity (A2LA Cert. No. 2785.01) 12/06/2016 Page 1 of 3

In-Life Studies Subcutaneous Implant Test Intramuscular Implant 28 Day Osteoinduction Assay in Mice or Rats Japanese Primary Skin Irritation Japanese Intracutaneous Reactivity Test USP Intracutaneous Injection Test ISO Intracutaneous Reactivity Test ISO Guinea Pig Maximization Sensitization Test Buehler Sensitization Test Primary Skin Irritation Guinea Pig Maximization Sensitization Test - Method for Japanese Ministry of Health, Labor and Welfare Vaginal Mucosal Irritation Study Acute Systemic Toxicity Test Subacute/Subchronic Toxicity Test Rabbit Pyrogen Test In Vivo Assay for Viral Contaminants Sample Preparation Procedures Japanese Extraction Procedures and Alternate Preparation Methods Preparation of Biomaterials for Extraction Preparation of Biomaterials for Implant Tests Preparation of Biomaterials for Agarose Overlay, Primary Skin Irritation, and Repeated Patch Dermal Sensitization Preparation of Biomaterials for Hemocompatability Tests Sample Preparation for USP Rabbit Pyrogen Test and the Material Mediated Rabbit Pyrogen Test ISO 10993-6: Current Edition, Biological Intramuscular evaluation of medical devices - Part 6: Tests For local effects after implantation ISO 10993-10: Current Edition, Biological evaluation of medical devices - Part 10: Tests for irritation and delayed-type hypersensitivity ISO 10993-11: Current Edition, Biological evaluation of medical devices - Part 11: Tests for systemic toxicity Guidance for Industry Characterization and Qualification of Cell Substrates and Other Biological Materials Used in the Production of Viral Vaccines for Infectious Disease Indications (FDA, 2010) Points to Consider in the Characterization of Cell Lines Used to Produce Biologicals (1993) FDA European Pharmacopeia Current Edition; 2.6.16 Tests for extraneous agents in viral vaccines ISO 10993-12: Current Edition, Biological Evaluation of medical devices - Part 12: Sample preparation and reference materials (A2LA Cert. No. 2785.01) 12/06/2016 Page 2 of 3

Mycoplasma with Mycoplasmastasis with Mycoplasmastasis including Spiroplasma melliferum including M. putrefaciens and DNA Fluorochrome Staining with Mycoplasmastasis including S. melliferum including M. putrefaciens Research Products Test for the Presence of Mycoplasma with Mycoplasmastasis with Mycoplasmastasis including S. melliferum European Pharmacopeia Current Edition; 2.6.7 Mycoplasma Testing (EP) 21 CFR 610.30 Subpart D; Mycoplasma Testing U.S. Food and Drug Administration (FDA) Center for Biologics Evaluation and Research (CBER) 1993. Points to Consider in the Characterization of Cell Lines Used to Produce Biologicals United States Pharmacopeia Current Edition: USP <63> (A2LA Cert. No. 2785.01) 12/06/2016 Page 3 of 3

Accredited Laboratory A2LA has accredited St. Paul, MN for technical competence in the field of Chemical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 6 th day of December 2016. President and CEO For the Accreditation Council Certificate Number 2785.02 Valid to January 31, 2019 For the tests to which this accreditation applies, please refer to the laboratory s Chemical Scope of Accreditation.

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 2540 Executive Drive St. Paul, MN 55120 Deborah Erickson Phone: 1-888-794-0077 CHEMICAL Valid To: January 31, 2019 Certificate Number: 2785.02 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following tests on medical devices including, but not limited to: polymers, metals & alloys, ceramics, drug compounds, and natural macromolecules: Test Technology Inductively Coupled Plasma / Mass Spectrometry (ICP/MS) Inductively Coupled Plasma / Optical Emission Spectrometry (ICP/OES) Ultra Performance Liquid Chromatography / Mass Spectrometry (UPLC/MS) Gas Chromatography / Mass Spectrometry (GC/MS) Residual Solvent Headspace Gas Chromatography / Mass Spectrometry (HSGC/MS) Test Method Extraction (A2LA Cert. No. 2785.02) 12/06/2016 Page 1 of 1