Propane Catalog. Regulators Meters. v. 9, Mar 2014

Propane Catalog Regulators Meters Accessories v. 9, Mar 2014

2

3 DOMESTIC HIGH PRESSURE REGULATORS (POUNDS TO POUNDS) Compact First Stage Regulator - Domestic First stage regulator in two stage systems for domestic applications Reduce tank pressure to 10 PSIG compact size is ideal for domestic size ASME or DOT propane containers delivering up to 1,500,000 BTU/hr Connects using standard POL x! NPT Pigtail UL 144 listed Painted red to denote first stage Factory adjusted for 10 PSIG High capacity relief provides overpressure protection 3/8 tapped vent Test Tap 1/8 NPT LV3403TR Part # Inlet Orifice Size Version 1 MAOP PSIG Cross Ref LV3403TR 1/4" 1/2" 1/4 10 PSIG Relief 1,500,000 250 R122H-AAJ 1. based on Inlet 20 PSIG greater than set pressure, 20% droop. First Stage Regulator Domestic / Small Commercial First stage regulator in two stage systems for small commercial applications Reduce tank pressure to 10 PSIG Ideal for commercial propane containers up to 1200 Gallons, delivering up to 2,500,000 BTU/hr Connects using standard POL x POL Hogtail or manifolded to multiple tanks UL 144 listed Painted red to denote first stage High capacity relief provides overpressure protection " F NPT vent Downstream Test Tap Replaceable Nozzle and & Seat Disc. LV4403TR9 Part # Inlet (NPT) Orifice Size Adjustment Version 1 MAOP PSIG Cross Ref LV4403TR4 1/2" 1/2" 1/4 5-10 PSIG 10 PSIG Relief 2,500,000 250 R622H-BGJ LV4403TR9 FPOL 1/2" 1/4 5-10 PSIG 10 PSIG Relief 2,500,000 250 R622H-HGJ LV4403TR96 FPOL 3/4" 1/4" 5-10 PSIG 10 PSIG Relief 2,500,000 250 R622-JGJ 1. based on Inlet 20 PSIG greater than set pressure, 20% droop. First stage regulators are installed at the tanks using a pig tail or hog tail. They reduce tank pressure to 10 PSIG. The internal reliev valve provides safety, protecting the downstream piping and reducing the possibility of the 1 st stage pressure piping from becoming high enough to form liquid

4 DOMESTIC SECOND STAGE LOW PRESSURE REGULATORS (POUNDS TO INCHES) 2 nd Stage Regulator Domestic / Small Commercial Second stage regulator in two stage systems for domestic and small commercial applications Reduce first stage regulator pressure of 5-20 PSIG down to 11 w.c. Mounts directly to house piping. UL 144 listed Painted brown to denote second stage Factory adjusted for 11 w.c. High capacity relief provides overpressure protection Test Tap LV4403B4 Part # Inlet (NPT) Orifice Size Adjustment Version 1 MAOP PSIG Cross Ref LV4403B4 1/2" 1/2" #28 9-13 w.c. 11 w.c. Relief 935,000 20 R622-BCF LV4403B46 1/2" 3/4" #28 9-13 w.c. 11 w.c. Relief 935,000 20 R622-CFF LV4403B66 3/4" 3/4" #28 9-13 w.c. 11 w.c. Relief 935,000 20 R622-DFF LV4403B66RA (90 ) 3/4" 3/4" 3/16 9-13 w.c. 11 w.c. Relief 1,000,000 20 R642-DFF 1. based on Inlet 10 PSIG, outlet pressure of 9 w.c. (2 droop from 11 w.c. set point) 2 nd Stage Regulator Medium Commercial Second stage regulator in two stage systems for medium sized commercial applications Reduce first stage regulator pressure of 5-20 PSIG down to 11 w.c. Mounts directly to house piping. UL 144 listed With 15 PSIG inlet pressure, regulator is designed to not pass more than 2 PSIG with the seat disc removed. Painted brown to denote second stage Factory adjusted for 11 w.c. High capacity relief provides overpressure protection Test Tap 1/8 NPT LV5503B4 Part # Inlet (NPT) Orifice Size Adjustment Version 1 MAOP PSIG Cross Ref LV5503B4 1/2" 3/4" 1/4" 9-13 w.c. 11 w.c. Relief 1,600,000 20 R622-CFF LV5503B6 3/4" 3/4" 1/4" 9-13 w.c. 11 w.c. Relief 1,600,000 20 HSR-BFC LV5503B8 3/4" 1" 9/32 9-13 w.c. 11 w.c. Relief 2,300,000 20 CS200IR 1. based on Inlet 10 PSIG, outlet pressure of 9 w.c. (2 droop from 11 w.c. set point)

5 INTEGRAL TWO-STAGE REGULATOR (POUNDS TO INCHES) Integral Two Stage Regulator Domestic / Small Commercial Combines First and Second Stage regulator into a singe compact unit. for domestic and small commercial applications Reduce tank pressure down to 11 w.c. Used where piping distance is short, on mobile homes, 100 pound and 420 pound DOT Cylinders UL 144 listed Painted brown to denote integral two stage Factory adjusted for 11 w.c. High capacity relief provides overpressure protection Test Taps LV404B4 Part # Inlet (NPT) Orifice Size Adjustment Version 1 MAOP PSIG Cross Ref LV404B4 1/4" 1/2" 0.219 9-13 w.c. 11 w.c. Relief 525,000 250 R232A-BBF LV404B46 1/4" 3/4" 0.219 9-13 w.c. 11 w.c. Relief 525,000 250 R632A-CFF LV404B9 FPOL 1/2" 0.219 9-13 w.c. 11 w.c. Relief 525,000 250 R232A-HBF LV404B96 FPOL 3/4" 0.219 9-13 w.c. 11 w.c. Relief 525,000 250 R632A-JFF PIGTAILS, HOGTAILS & TEES Pig Tails Part # Length Connection POL Hex Nipple 1661-20 20 POL x 1/4" Inv. Fl. 1-1/8 Long 1661-30 20 POL x 1/4" Inv. Fl. 1-1/8 Long 1662-12 12 POL x POL 7/8 Long 1669-12 12 POL x 1/4" NPTM 7/8 Long 1669-20 20 POL x 1/4" NPTM 7/8 Long Hog Tails Tee Manifolds Part # Length Connection POL Nipple Part # Check Inlet Hex 1680-12 12 POL x POL 7/8 Short 1700B No 1/4" Inv. Fl. 1/4" MNPT 1661-20 20 POL x 1/4" Inv. Fl. 1-1/8 Short

6 COMMERCIAL / INDUSTRIAL HIGH PRESSURE REGULATORS (POUNDS TO POUNDS) Direct-Operated High Regulator First Stage L627, P627 & R627 Direct-operated regulator with high capacity Designed for high pressure commercial / industrial applications like restaurants, office buildings, factories, laundromats, etc. Used for first stage (tank) and second stage Can be used to manifold multiple tanks together Yellow: stock Available with internal relief valve and external control line connections for operator/monitor Available with threaded bodies, flanged end connections and socket weld end connections Available as NACE construction, L version UL Listed Can be rotated in four positions for easy installation 250 PSIG MAOP for Non Relief, 200 PSIG for R version Part # Inlet Orifice Size Adjust. Version 1 MAOP PSIG Cross Ref P627-06-020-00-4-010 2 3/4" 3/4" 1/4 Non Relief 3,940,000 250 NA P627-06-020-00-6-010 2 3/4" 3/4" 3/8 Non Relief 6,133,000 250 627-5810 P627-06-020-00-8-010 2 3/4" 3/4" 1/2 5-20 Non Relief 10,851,000 250 627-6210 P627-08-020-00-6-010 2 1 1" 3/8 PSIG 10 PSIG Non Relief 7,490,000 250 NA P627-08-020-00-8-010 2 1 1 1/2 Non Relief 10,867,000 250 627-7710 P627-16-020-00-8-010 2 2 2 1/2 Non Relief 10,263,000 250 NA P627-06-020-20-8-010 3 3/4" 3/4" 1/2 Monitor 10,851,000 250 627M-421 P627-08-020-20-8-010 3 1" 1" 1/2 5-20 10-15 Monitor 10,867,000 250 627M-471 P627-16-020-20-8-010 3 2" 2" 1/2 PSIG PSIG Monitor 10,263,000 250 627M-267 R627-06-020-00-6-010 4 3/4" 3/4" 3/8 Int. Relief 5,640,000 200 627R-113 R627-06-020-00-8-010 4 3/4" 3/4" 1/2 Int. Relief 7,594,000 200 627R-117 R627-08-020-00-6-010 4 1 1 3/8" 5-20 10 PSIG Int. Relief 5,640,000 200 627R-193 R627-08-020-00-8-010 4 1 1 1/2 PSIG Int. Relief 7,689,000 200 627R-197 R627-16-020-00-8-010 4 2 2 1/2 Int. Relief 7,689,000 200 N/A P627-06-040-00-8-010 2 3/4" 3/4" 1/2 Non Relief 14,966,000 250 NA P627-08-040-00-6-010 2 1 1" 3/8 15-40 40 PSIG Non Relief 14,759,000 250 627-117 P627-08-040-00-8-010 2 1 1 1/2 PSIG Non Relief 14,966,000 250 627-497 P627-16-040-00-8-010 2 2 2 1/2 Non Relief 21,130,000 250 627-577 P627-08-040-20-8-010 3 1" 1" 1/2 15-40 40 Monitor 14,966,000 250 NA P627-16-040-20-8-010 3 2" 2" 1/2 PSIG PSIG Monitor 21,130,000 250 627M-577 R627-08-040-00-6-010 4 1 1 3/8" Int. Relief 14,616,000 200 627R-194 R627-08-040-00-8-010 4 1 1 1/2 15-40 40 Int. Relief 14,934,000 200 627R-198 R627-16-040-00-8-010 4 2 2 1/2 PSIG PSIG Int. Relief 14,934,000 200 N/A 1. based on Inlet 20 PSIG greater than set pressure, 20% droop. 2. For UL Listed Construction replace P in part number, with L. example L627 denotes a UL Listed version of the P627 3. Monitor Applications, constructed with blocked throat and 1/8 external control line connection 4. R denotes token Internal relief. 5. Items in yellow are stock

7 Direct-Operated High Regulator Direct-operated regulator with capacity up to 14,000,000 BTU Designed for high pressure commercial / industrial applications like restaurants, office buildings, factories, laundromats, etc. Available in low pressure models Other orifice size and pressure ranges available Available as NACE construction Available with 1 and 2 flanged end connections 2 NPT (Iron Case and Body) 2 Flanged (Iron Case, Steel Body) ANSI 300 RF Nylon Seat, Neoprene Diaphragm -20-150 F Temp P630 Part # Connections Orifice Size Adjust. Version 1 MAOP PSIG Cross Ref P630-16-020-00-8-130 2 NPT 1/2 8-20 10 Non Relief 13,981,000 250 630-104/78 P630-16-020-B0-8-131 2 CL300 RF 1/2" PSIG PSIG Non Relief 13,981,000 250 630-104/78F based on Inlet pressure 20 PSIG greater than set pressure, 20% droop. Requires Downstream Relief valve. Pilot operated regulator with capacity up to 74,000,000 BTU Designed for high pressure commercial / industrial applications like factories, multi-building settings or campuses. Available in low pressure models Other orifice size and pressure ranges available Available with 2 NPT or flanged end connections External Downstream Control line required Monitor versions available -20-180 F Temp (300 F w/ Fluorocarbon trim) Non Relief (require additional protection for overpressure protection) P99 Part # Connections Orifice Size Adjust. 1 MAOP PSIG Cross Ref P99-510P 2 NPT 7 w.c. - 1 29,000,000 99-510P P99F-510P 2 CL300 RF 2 PSIG PSIG 29,000,000 99F-510P P99-511P 2 NPT 1-5 5 33,000,000 99-511P P99F-511P 2 CL300 RF PSIG PSIG 33,000,000 99F-511P P99-512P 2 NPT 2-10 10 36,000,000 99-513P P99F-512P 2 CL300 RF PSIG PSIG 36,000,000 99F-513P P99-512P 2 NPT 7/8 5-15 15 38,000,000 250 99-512P P99F-512P 2 CL300 RF PSIG PSIG 38,000,000 99F-512P P99-515P 2 NPT 10-20 20 41,000,000 99-515P P99F-515P 2 CL300 RF PSIG PSIG 41,000,000 99F-515P P99-903P 2 NPT 10-65 30 44,000,000 99-903P P99F-903P 2 CL300 RF PSIG PSIG 44,000,000 99F-903P P99-502PH 2 NPT 1-5 5 50,000,000 99-502PH P99F-502PH 2 CL300 RF PSIG PSIG 50,000,000 99F-502PH P99-503PH 2 NPT 2-10 10 61,000,000 99-503PH P99F-503PH 2 CL300 RF PSIG PSIG 61,000,000 99F-503PH P99-504PH 2 NPT 5-15 15 63,000,000 300 99-504PH P99F-504PH 2 CL300 RF 1-1/8 PSIG PSIG 63,000,000 99F-504PH P99-505PH 2 NPT 10-20 20 68,000,000 99-505PH P99F-505PH 2 CL300 RF PSIG PSIG 68,000,000 99F-505PH P99-501PH 2 NPT 10-65 30 74,000,000 99-501PH P99F-501PH 2 CL300 RF PSIG PSIG 74,000,000 99F-501PH based on Inlet pressure 20 PSIG greater than set pressure, 20% droop from set.

8 COMMERCIAL / INDUSTRIAL HIGH PRESSURE REGULATORS (POUNDS TO POUNDS) High Flow & High Precision Regulator - First Stage DIVAL-600-TR High pressure, high capacity regulator Designed for industrial service regulation, and all applications where accurate pressure control, ease of adjustment, and fast response are required such as for burners, industrial ovens, boilers, etc. Operating range: 290 PSIG inlet pressure, with outlet pressure range of 6" WC - 60 PSIG Can be used for 1 st stage or 2 nd stage Unique built-in pulsation dampener allows for nearly infinite flow rate turn-down Direct acting spring-loaded pressure regulator Simple spring loaded, Balanced valve design External sensing line Available in Operator/Monitor configuration or with integrated high pressure Slam Shut Steel Body Part # Inlet Spring Color Adjust. Internal Relief Valve * DIVAL-600-TR-W/Y-10# 2 NPT 2 NPT White/Yellow 8.5 14.5 PSIG 10 PSIG Optional 68,000,000 DIVAL-600-TR-W/G-20# 2 NPT 2 NPT White/Green 15.2-33 PSIG 20 PSIG Optional 64,000,000 Cross reference: Fisher 99. * based on inlet pressure 20 PSIG above set pressure. Note: when used as First Stage regulator, appropriate overpressure protection should be employed in the form of either a slam shut or operator/monitor set. When installed as an operator monitor, capacity of the op/monitor set will be approximating 70% of the single regulator capacity expressed above. will increase as function of increased inlet pressure (after a vaporizer), consult extended capacity charts. NORVAL High pressure, high capacity regulator Designed for industrial service regulation, and all applications where accurate pressure control, ease of adjustment, and fast response are required such as for burners, industrial ovens, boilers, etc. Operating range: 250 PSIG inlet pressure, with outlet pressure range of 6" WC - 60 PSIG Can be used for 1 st stage or 2 nd stage Unique built-in pulsation dampener allows for nearly infinite flow rate turn-down Direct acting spring-loaded pressure regulator Simple spring loaded, Balanced valve design External sensing line Available in Operator/Monitor configuration or with integrated high pressure Slam Shut CI Body Part # Inlet Spring Color Adjust. NORVAL-375-2-BRWN-10# NORVAL-375-2-LTBLU-12# NORVAL-375-2-WT/YL-15# NORVAL-375TR-2-GRN- 20# 150 FL 150 FL 150 FL 150 FL 150 FL 150 FL 150 FL 150 FL Brown (#2704062) Light Blue (#2704400) White/Yellow (#2704515) Green (#2704390) Internal Relief Valve * (10% droop) 6.8 10.4 PSIG 10 PSIG No 105,000,000 9.8-13.7 PSIG 12 PSIG No 102,500,000 13.0 15.9 PSIG 15 PSIG No 114,000,000 13.0 23.2 PSIG 20 PSIG No 122,500,000 NORVAL-375-3-BRWN-10# NORVAL-375-3-LTBLU-12# 3 ANSI 150 FL 3 ANSI 150 FL 3 ANSI 150 FL 3 ANSI 150 FL Brown (#2704062) Light Blue (#2704400) 6.8 10.4 PSIG 10 PSIG No 204,160,000 9.8-13.7 PSIG 12 PSIG No 199,000,000 Cross reference: Fisher 99. * based on inlet pressure 20 PSIG above set pressure, 10% gauge drop from set point Note: when used as First Stage regulator, appropriate overpressure protection should be employed in the form of either a slam shut or operator/monitor set. When installed as an operator monitor, capacity of the op/monitor set will be approximating 70% of the single regulator capacity expressed above. will increase as function of increased inlet pressure (after a vaporizer), consult extended capacity charts.

9 Operator / Monitor Regulator Sets First Stage Operator Monitor Regulator sets provide overpressure protection for jurisdictional systems and large commercial applications. These systems consist of two regulators in series. The upstream regulator must always be of a closed-throat design with an external sensing line. The external sensing line must be connected in the downstream piping after the operator regulator. The upstream wide open Monitor takes control only in the event of the failure of the downstream Operator regulator. The advantage to this method of regulation is that is provides superior overpressure protection while still providing continuous supply of gas to the end customer. 1/4 Bleed Valve 1/4 full port ball valve, locked open 1/4 Bleed Valve Wide Open Monitor Operator Monitor Connection Orifice Set Pres. Operator Connection Orifice Set Pres. in P627-06-020-20-8-010 3/4" NPT 1/2" 15 P627-06-020-00-6-010 3/4" NPT 3/8" 10 4,290,000 P627-08-020-20-8-010 1" NPT 1/2" 15 P627-08-020-00-8-010 1" NPT 1/2" 10 7,600,000 P627-16-020-20-8-010 2" NPT 1/2" 15 P627-16-020-00-8-010 2" NPT 1/2" 10 7,600,000 based on 30 PSIG Inlet, 10 PSIG outlet with 20% droop. Operator/Monitor configuration gets 70% of the capacity of a standalone regulator. Piping up to the inlet of the operator (shown in red) should be schedule 80. For larger systems, both the operator and the monitor have external sensing lines. Upstream Monitor Sensing Line 1/2 Connection Downstream Operator Optional Sensing line Bleed valve, FULL port, locked closed Sensing line isolation valve, FULL port, locked open # sensing lines all connect at same point or downstream 1/4 Bleed Valve Optional 1 Relief Valve 10 PSIG Set : 12 PSIG Set : 10 PSIG 4D minimum 2D minimum Monitor Connection Orifice Set Pres. Operator Connection Orifice Set Pres. in DIVAL-600-TR-M-W/Y-12# 2 NPT 2 12 DIVAL-600-280-W/Y 2 NPT 2 10 47,600,000 NORVAL-375-2-LTBLU-12# 2 FL 2 12 NORVAL-375-2-BRWN-10# 2 FL 2 10 73,600,000 NORVAL-375-3-LTBLU-12# 3 FL 3 12 NORVAL-375-3-BRWN-10# 3 FL 3 10 143,200,000 based on 30 PSIG Inlet, 10 PSIG outlet with 20% droop. Operator/Monitor configuration gets approximately 70% of the capacity of a standalone regulator. Piping up to the inlet of the operator (shown in red) should be schedule 80.

10 HIGH PRESSURE COMMERCIAL REGULATORS (POUNDS TO POUNDS) High Non-Relieving Adjustable Regulators P32 & P36 Pounds to pounds regulator Suitable for liquid or vapor service Used for torches, tar heaters, flame cultivators and other industrial type services UL Listed NACE available (non-ul) 60-mesh particulate screen Non Relieving Adjustment screw (P32) or fixed/non adjustable (P36) Mult. outlet taps (for optional gauge and relief valve) 0-10, 30, 60, 120 PSIG Spring s 250 PSIG MAOP Part # Inlet Adjust. Pr. Vent Location Int.Relief Valve P32-02-010-10# 1/4 NPT 1/4 NPT 0-10 PSIG 10 PSIG Over inlet No P32-02-030-20# 1/4 NPT 1/4 NPT 0-30 PSIG 20 PSIG Over inlet No P32-02-060-30# 1/4 NPT 1/4 NPT 0-60 PSIG 30 PSIG Over inlet No P32-02-060-50# 1/4 NPT 1/4 NPT 0-60 PSIG 50 PSIG Over inlet No P36-020-10# 1/4 NPT 1/4 NPT Fixed 10 PSIG Over inlet No P36-020-15# 1/4 NPT 1/4 NPT Fixed 15 PSIG Over inlet No P36-020-20# 1/4 NPT 1/4 NPT Fixed 20 PSIG Over inlet No Cross reference: Fisher 67CW, 67CH, 67CD, 67CN, Rego 597F High Non-Relieving Adjustable Regulator Medium Pounds to pounds regulator Suitable for liquid or vapor service Used for torches, tar heaters, flame cultivators and other industrial type services UL Listed Minimal supply pressure effect Non Relieving T-handle adjustment High 400 PSIG MAOP P37 Part # Inlet Adjust. Pr. Vent Location Int.Relief Valve P37-04-010-10# 1/2 NPT 1/2 NPT 0-10 PSIG 10 PSIG Over inlet No 7,000,000 P37-04-030-20# 1/2 NPT 1/2 NPT 0-30 PSIG 20 PSIG Over inlet No 7,500,000 P37-04-060-30# 1/2 NPT 1/2 NPT 0-60 PSIG 30 PSIG Over inlet No 8,000,000 P37-04-060-50# 1/2 NPT 1/2 NPT 0-60 PSIG 50 PSIG Over inlet No 8,000,000 P37-06-010-10# 3/4 NPT 3/4 NPT 0-10 PSIG 10 PSIG Over inlet No 8,000,000 P37-06-030-20# 3/4 NPT 3/4 NPT 0-30 PSIG 20 PSIG Over inlet No 8,000,000 P37-06-060-30# 3/4 NPT 3/4 NPT 0-60 PSIG 30 PSIG Over inlet No 8,000,000 P37-06-060-50# 3/4 NPT 3/4 NPT 0-60 PSIG 50 PSIG Over inlet No 8,000,000 Cross reference: Fisher 64, Rego 1584M & 1586M. based on 20% droop from set point, inlet pressure 20 PSIG above set point. Downstream Relief valve should be installed to provide over-pressure protection

11 High Non-Relieving Adjustable Regulator High P38 Pounds to pounds regulator Ideal for multiple tank manifold installations Suitable for liquid or vapor service Used for multi tank installs feeding torches, tar heaters, flame cultivators and other industrial type services UL Listed Balanced pintle design Minimal supply pressure effect Non relieving T-handle adjustment High 400 PSIG MAOP Part # Inlet Adjust. Pr. Vent Location Int. Relief Valve P38-08-010-10# 1 NPT 1 NPT 0-10 PSIG 10 PSIG Over inlet No 9,000,000 P38-08-030-20# 1 NPT 1 NPT 0-30 PSIG 20 PSIG Over inlet No 9,000,000 P38-08-060-30# 1 NPT 1 NPT 0-60 PSIG 30 PSIG Over inlet No 9,000,000 P38-08-120-60# 1 NPT 1 NPT 0-120 PSIG 60 PSIG Over inlet No 9,000,000 Cross reference: Rego 1588M. Downstream Relief valve should be installed to provide over-pressure protection Single Stage Regulators for Portable Appliances P912 Used on small portable appliances and outdoor cooking appliances like grills, portable cooking stoves, and portable heating appliances. Note: UL requires horizontally mounted regulators to be installed with vent opening protection to protect blockage by freezing rain. UL Listed 250 PSIG MAOP Rating Multiple springs for adjustable outlet pressures from 3 w.c. to 5 PSIG Internal relief with 1/8 NPT vent, SS Screen UL Listed / UL 144 Part # Inlet Adjust. Pr. Int. Relief Valve 10 PSIG in 100 PSIG in P912-02-060 1/4 NPT 1/4 NPT 9.25-13 w.c. 11 w.c. Yes 1/8 101,000 243,000* P912-03-060 1/4 NPT 3/8 NPT 9.25-13 w.c. 11 w.c. Yes 1/8 101,000 243,000* Cross reference: Fisher 912/101 & 912/104, REGO 302, LV2302A2. *Note: per section 6.8.2 (c) of NFPA-58: Single Stage Regulators shall be permitted on small portable appliances and outdoor cooking appliances with input ratings of 100,000 BTU/hr or less. High Commercial / Industrial Regulator A versatile regulator designed for a range of highpressure drop applications The P39 regulator is ideal for high pressure reduction, pilot gas regulation or utilized as a pressure loading regulator Can be used as a first cut regulator and in distribution systems Brass, Stainless or Nickel Plated Tapped Bonnet Vent available Nylon, Teflon and PTFE Seats 30 to 500 PSIG in 6 s P39 Part # Inlet Adjust. P039-02-120-0-X-0-1-0-0 1/4" 1/4" 0-120 75 Cross reference: Fisher 1301F. based on 2000 PSIG, 10% droop Vent Location Upper Diaph. Case Internal Relief No 3,800,000

12 COMMERCIAL / INDUSTRIAL LOW PRESSURE / 2 nd STAGE REGULATORS Low Second Stage Regulator Light Commercial Second stage direct-operated regulator for low pressure and high capacity Typically used in light commercial and industrial applications like restaurants and laundromats, and for small to medium size furnaces and boilers A wider range of spring ranges and orifices are available; please contact us for further assistance Rugged Cast iron Body with Aluminum Diaphragm Case Large Vent with Stainless Steel Bug Screen Rotateable Diaphragm Case Large Internal Relief Valve Removable orifice True Bubble Tight Lock-up B42-R, B31-R Part # Inlet Orifice Size Spring Color Adjust. Internal Relief Valve B42-RDD-050 1/2" 1/2" 1/4 Dk Green 6-16 w.c 11 w.c. Yes 3/4 1,331,000 B42-RED-075 3/4" 3/4" 5/16 Dk Green 6-16 w.c 11 w.c. Yes 3/4 1,713,000 B42-RFD-100 1" 1" 3/8 Dk Green 6-16 w.c. 11 w.c. Yes 3/4 1,923,000 B42-RFD-125 1-1/4" 1-1/4" 3/8 Dk Green 6-16 w.c. 11 w.c. Yes 3/4 1,923,000 B31-RFF-075 3/4" 3/4" 3/8 Blue 8-12 w.c. 11 w.c Yes 3/4 3,305,000 B31-RFF-100 1" 1" 3/8 Blue 8-12 w.c. 11 w.c Yes 3/4 3,305,000 B31-RFF-125 1-1/4" 1-1/4" 3/8 Blue 8-12 w.c. 11 w.c Yes 3/4 3,305,000 Cross reference: B42R = Fisher HSR / REGO, B31R = Fisher S102. based on 10 PSIG inlet, 11 w.c. outlet, 2 w.c. droop Low Second Stage Regulator Intermediate Commercial B34-SR, B34-R Second stage direct-operated regulator for low pressure and high capacity Typically used in light commercial and industrial applications like generators and for medium sizertu s, furnaces, & boilers A wider range of spring ranges and orifices are available; please contact us for further assistance Rugged Cast iron Body with Aluminum Diaphragm Case Large Vent with Stainless Steel Bug Screen Rotateable Diaphragm Case Large Internal Relief Valve Removable orifice True Bubble Tight Lock-up Part # Inlet Orifice Size Spring Color Adjust. Internal Relief Valve B34-SRQF-125 1-1/4" 1-1/4" 3/8 x 1/2" Blue 8 12 w.c. 11 w.c. Yes 3/4 5,019,000 B34-SRQF-150 1-1/2" 1-1/2" 3/8 x 1/2" Blue 8 12 w.c. 11 w.c. Yes 3/4 5,019,000 B34-SRQF-200 2" 2" 3/8 x 1/2" Blue 8 12 w.c. 11 w.c. Yes 3/4 5,019,000 B34-RGL-125 1-1/4" 1-1/4" 1/2 Black 6.5 13.5 w.c. 11 w.c. Yes 1 6,683,000 B34-RGL-150 1-1/2" 1-1/2" 1/2 Black 6.5 13.5 w.c. 11 w.c. Yes 1 6,683,000 B34-RGL-200 2" 2" 1/2 Black 6.5 13.5 w.c. 11 w.c. Yes 1 6,683,000 B38-RNL-200 2" 2" 3/4" Black 6.5 13.5 w.c. 11 w.c. Yes 2.5 9,937,000 B38-RVL-200 2" 2" 1" Black 6.5 13.5 w.c. 11 w.c. Yes 2.5 14,706,000 Cross Ref: B34SR = Fisher S302, B34R = Fisher S202, B38R = Fisher CB800 or REGO LV6503, based on 10 PSIG inlet, 11 w.c. outlet, 2 w.c. droop

13 COMMERCIAL / INDUSTRIAL LOW PRESSURE / 2 nd STAGE REGULATORS Large Commercial and Industrial 2 nd Stage Regulator DIVAL 600-275 Appropriate for commercial and industrial applications such as burner and large appliance regulation where fast response is required Large sized Commercial Applications Second Stage Regulator Unique built-in pulsation dampener allows for nearly infinite flow rate turn-down Direct acting spring-loaded pressure regulator Simple spring loaded balanced valve Design External sensing Line Token Internal Relief Available in Operator/Monitor Configuration or with integrated high pressure Slam Shut Ductile Iron Body, 247 PSIG Rating Part # Inlet Spring Color Adjust. Internal Relief Valve DIVAL 600-BP-ORNG DIVAL 600-BP-RED DIVAL 600-BP-BLK DIVAL 600-MP-BLU DIVAL 600-MP-LBLU DIVAL 600-MP-BRWN 150 RF 150 RF 150 RF 150 RF 150 RF 150 RF 150 RF 150 RF 150 RF 150 RF 150 RF 150 RF Orange (#2701620) Red (#2701860) Black (#2702370) Blue (#2702540) Light Blue (#2702730) Brown (#2702950) Cross reference: Fisher 133H or 133L, Fisher 99 for some select applications based on 10 PSIG inlet, 20% Gauge drop from set point. 6-12 w.c. 11 w.c. Optional 30,750,000 10-19.5 w.c. 14 w.c. Optional 30,250,000 0.9 1.3 PSIG 1 PSIG Optional 28,500,000 1.4 2.4 PSIG 2 PSIG Optional 27,800,000 2.1 3.9 PSIG 3 PSIG Optional 25,000,000 3.3 5.1 PSIG 5 PSIG Optional 22,600,000 Large Industrial 2 nd Stage Regulator Appropriate for commercial and industrial applications such as burner and large appliance regulation where fast response is required Large sized Commercial Applications Second Stage Regulator Typically installed as operator / monitor or with P133L & P133H relief valve for overpressure protection* Rugged ductile iron body, Aluminum spring case Removable stainless steel bug screen 2 NPT Standard, ANSI 125 FF optional " External Control Line Connection Available with 25%, 40% or 60% Restrictor Collar to better match capacity to load. Part # Inlet Spring Adj Internal Relief Valve* ** P133L-014-0-00-1E-00 2 NPT 2 NPT Purple 6 14 w.c. 11 w.c. No* 63,500,000 (1) P133L-018-0-00-1E-00 2 NPT 2 NPT White 8.5 18 w.c. 14 w.c. No* 71,000,000 (1) P133L-028-0-00-1E-00 2 NPT 2 NPT Green 1-2 PSIG 1 PSIG No* 69,900,000 (2) P133L-002-0-00-1E-00 2 NPT 2 NPT Drk Blue 0.75-2 PSIG 2 PSIG No* 73,000,000 (2) P133H-003-0-00-1E-00 2 NPT 2 NPT Orange 1.5-3.25 PSIG 3 PSIG No* 66,700,000 (2) P133H-005-0-00-1E-00 2 NPT 2 NPT Yellow 2-5 PSIG 5 PSIG No* 55,600,000 (2) P133H-010-0-00-1E-00 2 NPT 2 NPT Blue Stripe 5-10 PSIG 10 PSIG No* 81,000,000 (3) Cross reference: Fisher 133H or 133L, Fisher 99 for some select applications. * Supplemental relief valve or op / monitor set up may be required for over-pressure protection (1) based on 10 PSIG inlet, with 2 w.c. Gauge drop from set point (for inches delivery) (2) based on 10 PSIG in, 20% Gauge drop from set point (3) based on 20 PSIG in, 20% Gauge drop from set point

14 2 PSI REGULATORS 2 nd Stage 2 PSIG Service Regulator - Commercial 2 nd Stage Models B42R, B34SR, B34 Designed for 2 PSI LP regulator systems in light/medium commercial applications, example: box stores, large restaurants, hotels Used after a First Stage regulator, reducing pressure from 10 PSI to 2 PSI Feed 3 rd stage line regulator(s), which cut pressure to approximately 11 WC for appliances Rugged cast iron body, Aluminum spring case Large diaphragm for superior pressure control Internal Relief for over-pressure protection Diaphragm case can be rotated to re-orient vent Removable stainless steel bug screen Variety of orifices available for added capacity Part # Inlet Orifice Spring Color Adj Internal Relief Valve* ** B-42R-FH-075 3/4 3/4 3/8 Yel/Blk 1-2 PSIG 2 PSIG Yes 3/4 1,980,000 B-42R-FH-100 1 1 3/8 Yel/Blk 1-2 PSIG 2 PSIG Yes 3/4 1,980,000 B-34SRHP-QN-125 1-1/4 1-1/4 3/8 x 1/2 White 1.75-2.5 PSIG 2 PSIG Yes 3/4 3,096,000 B-34SRHP-RN-150 1-1/2 1-1/2 1/2 x 5/8 White 1.75-2.5 PSIG 2 PSIG Yes 3/4 3,700,000 B-34R-GJ-150 1-1/2 1-1/2 1/2" Silv/Red 1.2-2.1 PSIG 2 PSIG Yes 1 4,315,000 B-34R-SJ-200 2 2 1/2 x 5/8 Silv/Red 1.2-2.1 PSIG 2 PSIG Yes 1 4,797,000 B-38R-VJ-200 2 2 1 Silv/Red 1.4-2.4 PSIG 2 PSIG Yes 2.5 12,790,000 B-38R-WJ-200 2 2 1-1/4 Silv/Red 1.4-2.4 PSIG 2 PSIG Yes 2.5 16,310,000 Cross reference: Fisher: HSR, S302, S202, Rego: LV5503Y6, LV5503Y8 * All regulators have internal relief valve to provide over-pressure protection and limit build up to below 5 PSIG with 2 PSIG set point. Supplemental relief valve may be required if local code requires less build up. Consult detailed capacity and relief charts. ** based on 10 PSIG Inlet, 2 PSIG outlet, 2% ABS droop (0.34 PSIG drop). Higher capacities available w/ larger orifice, may require extra relief valve. 2 PSIG Service Regulator - Industrial 2 nd Stage Models P133 Designed for 2 PSI LP regulator systems in light/medium commercial applications, example: box stores, large restaurants, hotels Used after a First Stage regulator, reducing pressure from 10 PSI to 2 PSI Feed 3 rd stage line regulator(s), which cut pressure to approximately 11 WC for appliances Rugged ductile iron body, Aluminum spring case Removable stainless steel bug screen 2 NPT Standard, ANSI 125 FF optional " External Control Line Connection Available with 25%, 40% or 60% Restrictor Collar to better match capacity to load. Part # Inlet Spring Adj Internal Relief Valve* ** P133L-002-0-00-1E-00 2 NPT 2 NPT Drk Blue 0.75-2 PSIG 2 PSIG No 60,500,000 P133H-003-0-00-1E-00 2 NPT 2 NPT Orange 1.5-3.25 PSIG 3 PSIG No 60,500,000 Cross reference: Fisher: 133L, Sensus 121-12 * Supplemental relief valve or operator / monitor set up may be required to meet over-pressure protection requirements. ** based on 10 PSIG Inlet, 2 PSIG outlet, 10% gauge droop (0.2 PSIG drop) *** can be configured as Operator/Monitor Operator Set 2 PSIG, Monitor set 3 PSIG, is reduced by 30%

15 APPLIANCE & LINE PRESSURE REGULATORS (3 rd Stage) Traditional Vented Appliance & Line Regulators for 2 PSIG and 5 PSIG LP Systems Light Commercial Models B42R, B31 For 2 PSIG or 5 PSIG systems requiring bubble tight lock-up and accurate final stage pressure control. Typically used on RTU s, Unit Heaters, Boilers, Furnaces, and any other gas appliances. Can feed single or multiple appliances Can be installed inside with vent line or outside True Bubble Tight lock-up Can be mounted in any position Internal Relief for Over-pressure protection Primed and Painted Removable orifice Large Internal Relief valve SS Vent Screen Appliance & Line Regulators for 2 PSIG and 5 PSIG LP Systems Small Commercial Part # Inlet Orifice Size Spring Color Adj. IRV 2 PSIG Inlet 11 w.c. outlet 5 PSIG Inlet 11 w.c. outlet B42-RDD-050 1/2" 1/2" 1/4" Dk Green 6-16 w.c 11 w.c. Yes 3/4" 440,000 844,000 B42-RGD-075 3/4" 3/4" 1/2 Dk Green 6-16 w.c 11 w.c. Yes 3/4" 1,160,000 1,875,000 B42-RGD-100 1" 1" 1/2 Dk Green 6-16 w.c. 11 w.c. Yes 3/4" 1,160,000 1,875,000 B42-GFD-125 1-1/4" 1-1/4" 1/2 Dk Green 6-16 w.c. 11 w.c. Yes 3/4" 1,160,000 1,875,000 B31-RGF-075 3/4" 3/4" 1/2 Blue 8-12 w.c. 11 w.c Yes 3/4" 1,670,000 2,620,000 B31-RGF-100 1" 1" 1/2 Blue 8-12 w.c. 11 w.c Yes 3/4" 1,670,000 2,620,000 B31-RGF-125 1-1/4" 1-1/4" 1/2 Blue 8-12 w.c. 11 w.c Yes 3/4" 1,670,000 2,620,000 Cross reference: Maxitrol 325-3L, 325-5AL, 325-7L, 210D - 1", 210D-1 1/4", Fisher S102, Sensus 143, Elster 1813B2 based on either 2 or 5 PSIG inlet, 11 w.c. outlet with 2 w.c. droop. MAOP: 10 PSIG for B42, 40 PSIG for B31R Appliance & Line Regulators for 2 PSIG and 5 PSIG LP Systems Commercial Part # Inlet Orifice Size Spring Color Adj. IRV 2 PSIG Inlet 11 w.c. outlet 5 PSIG Inlet 11 w.c. outlet B34S-RUF-125 1-1/4" 1-1/4" 7/8 x1 Blue 8-12 w.c 11 w.c. Yes 3/4" 3,295,000 7,450,000 B34S-RUF-150 1-1/2" 1-1/2" 7/8 x1 Blue 8-12 w.c 11 w.c. Yes 3/4" 3,295,000 7,450,000 B34S-RUF-200 2" 2" 7/8 x1 Blue 8-12 w.c 11 w.c. Yes 3/4" 3,295,000 7,450,000 B34-RUL-125 1-1/4" 1-1/4" 7/8 x1 Black 6-13.5 w.c 11 w.c. Yes 1" 7,240,000 11,420,000 B34-RUL-150 1-1/2" 1-1/2" 7/8 x1 Black 6-13.5 w.c 11 w.c Yes 1" 7,240,000 11,420,000 B34-RUL-200 2" 2" 7/8 x1 Black 6-13.5 w.c 11 w.c Yes 1" 7,240,000 11,420,000 B38-RWL-200 2 2 1-1/4 Black 6-13.5 w.c 11 w.c Yes 2" 6,470,000 9,750,000 P202-16-14-F 2" 2" 1-3/16 Purple 6-14 w.c 11 w.c Yes 1" 5,900,000 13,380,000 Cross reference Maxitrol 210D-1 1/4", 210-G, Fisher S302,S202, Sensus 243-8, 243-12, Elster 1813B based on either 2 or 5 PSIG inlet, 11 w.c. outlet with 2 w.c. droop 3. MAOP: 10 PSIG for B34SR, 25 PSIG for B34R, 40 PSIG for B38R Appliance & Line Regulators for 2 PSIG and 5 PSIG LP Systems Industrial Part # Inlet x Spring Adj Internal Relief Valve* 2 PSIG Inlet 11 w.c. outlet 5 PSIG Inlet 11 w.c. outlet P133L-014-0-00-1E-00 2 NPT Purple 6 14 w.c. 11 w.c. No* 25,000,000 47,000,000 * * Supplemental relief valve or operator / monitor set up may be required to meet over-pressure protection requirements.

16 APPLIANCE & LINE PRESSURE REGULATORS (3 rd Stage) Vent Limited Appliance & Line Regulators (Governors) for 2 PSIG and 5 PSIG LP Systems Vent limited appliance or line pressure regulator For 2 PSIG or 5 PSIG systems requiring bubble tight lock-up and accurate final stage pressure control. Typically used on RTU s, Unit Heaters, Boilers, Furnaces, and any other gas appliances. Can be installed inside without vent line (as per NFPA 54/58, if permitted by local authority) F30051, F30052, F30053 F30051, F30052, F300053, F30151, F30152, F30153, F31054, F30155 2 PSIG CSA certified Models (Single Regulator) with EVL (Vent Limiter) Part # Inlet Adjust. ANSI Z21.80A-2005/CSA 6,22a-2005 Class II Integral vent limiter & External Vent Limiter (EVL) True Bubble Tight lock-up Can be mounted in any position Double (safety diaphragm) with balanced valve OPD (DC) versions (CSA listed over pressure protection device) for 5 PSIG systems 7 PSIG MAOP, 2 PSIG CSA max for single cut, 5 PSIG CSA max for DC versions with OPD Vent Location 14 w.c. Inlet 11 w.c. outlet 2 PSIG Inlet 11 w.c. outlet F30051-B-EVL 1/2 1/2 473,000 1,479,000 F30052-B-EVL 3/4 3/4 473,000 1,840,000 F30053-B-EVL 1 1 473,000 2,390,000 F30151-B-EVL 3/4 3/4 On Top 1,320,000 4,454,000 6-14 w.c. 11 w.c. of Diaph. F30152 B-EVL 1 1 case 1,568,000 5,289,000 F30153-B-EVL 1-1/4 1-1/4 3,743,000 12,620,00 F30154-B-EVL 1-1/2 1-1/2 3,908,000 13,176,000 F30155-B-EVL 2 2 7,155,000 24,126,000 Cross reference: Maxitrol 325-3L, 325-5AL, 325-7L, 210D - 1", 210D-1 1/4" & 1 1/2", 210E-1 1/2" & 2" Alternate spring ranges available: Green Spring (-G) for 2-5 w.c. when using in place of Maxitrol RV series for Burner/Gas Train Applications 5 PSIG CSA certified Models (Operator / Monitor Regulator) with EVL (Vent Limiter) Part # Inlet Adjust. Vent Location 14 w.c. Inlet 11 w.c. outlet 5 PSIG Inlet 11 w.c. outlet F30051-DC-5-B/Y-EVL 1/2 1/2 473,000 1,479,000 F30052-DC-5-B/Y-EVL 3/4 3/4 473,000 1,840,000 F30053-DC-5-B/Y-EVL 1 1 473,000 2,390,000 On Top F30151-DC-5-B/Y-EVL 3/4 3/4 1,320,000 4,454,000 6-14 w.c. 11 w.c. of Diaph. F30152-DC-5-B/Y-EVL 1 1 case 1,568,000 5,289,000 F30153-DC-5-B/Y-EVL 1-1/4 1-1/4 3,743,000 12,620,00 F30154-DC-5-B/Y-EVL 1-1/2 1-1/2 3,908,000 13,176,000 F30155-DC-5-B/Y-EVL 2 2 7,155,000 24,126,000 Cross reference: Maxitrol w OPD: 325-3L48, 325-5AL48, 325-5AL600, 325-7L210 Alternate spring ranges available for lower or higher pressure applications. Spring Color CSA rated Inlet Green 2-5 w.c. 2 PSIG, 5 PSIG or 10 PSIG Red 2.75 7.87 w.c. 2 PSIG, 5 PSIG or 10 PSIG Black 6 14 w.c. 2 PSIG, 5 PSIG or 10 PSIG Yellow 9.8 27.5 w.c. 5 PSIG or 10 PSIG (OPD versions Only) Violet 23.6 59 w.c. (0.85 2.13 PSIG) Non CSA Orange 55 118 w.c. (2 4.26 PSIG) Non CSA

17 RELIEF VALVES Vapor Relief Valves Designed for installation after first stage, second stage regulators or final stage regulators. Protects downstream piping by relieving gas to atmosphere in case of regulator failure Variety of adjustment ranges Stainless steel vent protector Test port Made in U.S.A. P289 Propane Relief Part # Inlet Adjust. Point of Relief PSIG build up (start to discharge) SCFH Propane above set point P289-08-004-000-0-0-0 1 1 1-4.5 PSIG 1.5 PSIG 6,280 0.5 P289-08-015-000-0-0-0 1 1 4 15 PSIG 10 PSIG 18,840 5 P289-08-020-000-0-0-0 1 1 10-20 PSIG 15 PSIG 20,400 5 P289-08-050-000-0-0-0 1 1 15-50 PSIG 30 PSIG 28,000 10 P289-16-002-00-1-0-0-1 2 2 0.5 2.25 PSIG 1 PSIG 12,500 1 PSIG Cross reference: Fisher 289H/2, 289H/43, 289H/49, based on build up above point of relief. Some applications will require more than one relief valve. Vapor Relief Valve High Designed for installation after first stage regulators to add relief for over-pressure protection Used on large industrial or jurisdictional systems Protects downstream piping by relieving gas to atmosphere in case of regulator failure Variety of adjustment ranges Pilot Operated CI Body Nitrile Pilot Trim mtl. Filter & gauge installed Made in U.S.A. P1808 Propane Relief Part # Inlet Adjust. Point of Relief PSIG build up (start to discharge) SCFH Propane above set point P1808-16-018-R-3-0-0-0 2 2 3-18 PSIG (Grn) 12 PSIG 34,000 6 PSIG P1808-16-040-R-3-0-0-0 2 2 15-40 PSIG (Yel) 20 PSIG 49,600 10 PSIG Cross reference: Fisher 1808-50, 1808-51, based on build up above point of relief. Some applications will require more than one relief valve. Liquid Relief Valves Designed for use on relief and backpressure applications: LP-Gas Pumping and Vaporizors Protects downstream piping by relieving gas to atmosphere in case of regulator failure Variety of adjustment ranges Internal Sensing (no control line required) Cast Iron construction Tapped vent Made in U.S.A. P98H Part # Inlet Adjust. Point of Relief Valve Plug/Orifice Diaphragm Material Cross Ref P98H-06-140-1-00-E-3-0 3/4" 3/4" 70-140 PSIG 100 PSIG 416SS/Nitrile Neoprene 98H-22 P98H-08-140-1-00-E-3-0 1 1 70-140 PSIG 100 PSIG 416SS/Nitrile Neoprene 98H-30 Cross reference: 98H-22, 98H-30

18 REGULATOR ACCESSORIES Vents Type 3 Part # Size Thread Mat l Desc Type RV706-25DR 1/4 NPT-M Alu 90 deg, w Drip Edge, SS Bug Screen 1 RV706-38DR 3/8 NPT-M Alu 90 deg, w Drip Edge, SS Bug Screen 1 BLOVENT-075 3/4 NPT-F Alu 90 deg, w Drip Edge, SS Bug Screen 2 BLOVENT-100 1 NPT-F Alu 90 deg, w Drip Edge, SS Bug Screen 2 BLOVENT-125 1.25 NPT-F Steel 90 deg, w Drip Edge, SS Bug Screen 3 BLOVENT-150 1.5 NPT-F Steel 90 deg, w Drip Edge, SS Bug Screen 3 BLOVENT-200 2 NPT-F Alu 90 deg, w Drip Edge, SS Bug Screen 2 BLOVENT-250 2.5 NPT-M Stee 90 deg, w Drip Edge, SS Bug Screen 4 Gauges Type 1 Type 2 Type 4 Part # Description G25500 0-15 w.c.!, Lower Mount, St. Case, Copper Internals, Dry, 2.5 Dial G28145 0-15 w.c. Kit: Cary Case Case, 3ft Rubber Hose, 0-15 w.c. Gauge G22704 0-30 w.c.!, Lower Mount, St Case, Copper Internals, Dry, 2.5 Dial G24507 0-30 w.c. Kit: Cary Case Case, 3ft Rubber Hose, 0-30 w.c. Gauge G22702 0-5 PSIG!, Lower Mount, St. Case, Copper Internals, Dry, 2.5 Dial J7640PE 0-15 PSIG!, Lower Mount, S.S. Case, Copper Internals, Glycerin Filled 2.5 Dial J7646PE 0-60 PSIG!, Lower Mount, S.S. Case, Copper Internals, Glycerin Filled 2.5 Dial J7648PE 0-100 PSIG!, Lower Mount, S.S. Case, Copper Internals, Glycerin Filled 2.5 Dial

19 PROPANE VAPOR METERS Domestic and Small Commercial Domestic Propane Vapor Meters Metris 250-TC I250-TC Part # Connections Center to Center Distance Domestic and Small Commercial Vapor Meter Typically installed downstream of second stage regulator Max. Operating SCFH Propane Rugged Aluminum case 4 Digit index case reads in CuFt x 100 6 center to center makes it interchangeable with existing Rockwell/Equimeter/Sensus R275 meters or AmericanAC250 meters Retrofitable w pulse output and remote totalizer for hard to read areas AMR Ready propane MET-250-TC-20LT-075 3/4 M 6.0 5 PSIG 160 400,000 8 lbs MET-250-TC-20LT-100 1 M 6.0 5 PSIG 160 400,000 8 lbs Cubic Foot Indexes only as per National Board of Weights & Measures Domestic and Small Commercial Vapor Meter Typically installed downstream of second stage regulator AM-250 AC-250 Part # Connections Position Max. Operating SCFH Propane Weight Rugged Aluminum case 4 Digit odometer index reads in CuFt x 100 6 center to center makes it interchangeable with existing Rockwell/Equimeter/Sensus R275 meters or itron Metris 250TC meters Retrofitable w pulse output and remote totalizer for hard to read areas AMR Ready propane Weight AM-250-TC-075 3/4 F Side Connect 5 PSIG 160 400,000 12 lbs AC-250-TC-20LT-075 3/4 M Top, 6 C-C 5 PSIG 160 400,000 12 lbs AC-250-TC-20LT-100 1 M Top, 6 C-C 5 PSIG 160 400,000 12 lbs Cubic Foot Indexes only as per National Board of Weights & Measures Domestic Propane Vapor Meter with Integrated Regulator (RM) Metris RM 250-TC Domestic and Small Commercial Vapor Meter with integrated meter bar and second stage regulator (see B42R for details) Typically installed directly on top of riser Ideal for multi meter sets Unique integrated 2 nd stage regulator permits compact installation Integrated meter bar/manifold inlet on bottom, outlet out back Inlet and outlet pressure test ports 4 Digit odometer index reads in CuFt x 100 Retrofitable w pulse output and remote totalizer for hard to read areas Part # Connections Position / Connections Max. Operating SCFH Propane propane Regulator Set MET-RM-250-TC-3/4 3/4 M Bottom Inlet 5 PSIG 160 400,000 11 w.c. 12 lbs MET-RM-250-TC-1 1 M Back 5 PSIG 160 400,000 11 w.c. 12 lbs Cubic Foot Indexes only as per National Board of Weights & Measures Weight

20 PROPANE VAPOR METERS Commercial Small Commercial Propane Vapor Meters 400A-TC AL425-TC Part # Connections Center to Center Distance Small Commercial Vapor Meter Typically installed downstream of second stage regulator Max. Operating SCFH Propane Rugged Aluminum case 4 Digit odometer index reads in CuFt x 100 8.25 center to center, 30 Lt connections makes it interchangeable with existing Rockwell/Equimeter/Sensus R415 meters or American AL-425 meters Retrofitable w pulse output and remote totalizer for hard to read areas & AMR Ready propane Weight 400A-TC-30LT-125 1.25 M 8.25 10 PSIG 250 630,000 12.3 lbs AL400-TC-30LT-125 1.25 M 8.25 10 PSIG 250 630,000 21.0 lbs Cubic Foot Indexes only as per National Board of Weights & Measures Intermediate Commercial Propane Vapor Meters Commercial Vapor Meter Typically installed downstream of second stage regulator AC 630-TC Rugged Aluminum case 4 Digit odometer index reads in CuFt x 100 8.25 center to center Retrofitable w pulse output and remote totalizer for hard to read areas AMR Ready 45Lt Connections Part # Connections Center to center Distance Max. Operating SCFH Propane propane 630-TC-45LT-150 1.5 M 8.25 25 PSIG 395 990,000 21 lbs Cubic Foot Indexes only as per National Board of Weights & Measures Weight Commercial Vapor Meter Typically installed downstream of second stage regulator Rugged Aluminum case 4 Digit odometer index reads in CuFt x 100 45 Lt Connections: 10 center to center (675A) 11 center to center (800A & 1000A) Retrofitable w pulse output and remote totalizer for hard to read areas & AMR Ready 675A, 800A, 1000A Part # Connections Center to Center Distance Max. Operating SCFH Propane propane Weight 675A-TC-45LT-150 1.5 M 10 25 PSIG 425 1,060,000 43 lbs 800A-TC-45LT-150 1.5 M 11 25 PSIG 515 1,300,000 43 lbs 1000A-TC-45LT-150 1.5 M 11 25 PSIG 645 1,612,000 43 lbs

21 PROPANE VAPOR METERS Commercial / Industrial Commercial Propane Vapor Meters RM7000-TC Commercial Vapor Meter Typically installed downstream of second stage regulator Rugged Aluminum case Counter (CTR), Temperature Compensated (TC), and Temperature Compensated (AdEM-PTZ) versions available 6 Digit odometer reads in CuFt x 100 or LCD 6.75 or 9.5 Flange to Flange makes it interchangeable with Dresser or Elster/AMCO Rotary meters Retrofitable w pulse output and remote totalizer for hard to read areas & AMR Ready Model Connections End to End Distance ACFH Propane propane (at 11 w.c.) Differential inches w.c. Weight Pulse weight in CuFt RM1000 1.5 NPTM 10.5 1000 2,500,000 0.46 12 lbs 10 RM1500 1.5 NPTM 10.5 1500 3,800,000 0.53 13 lbs 10 RM2000 125 FF 6.75 2000 5,100,000 0.59 26 lbs 10 RM3000 125 FF 6.75 3000 7,600,000 0.67 27 lbs 10 RM5000 3 ANSI 125 FF 6.75 5000 12,800,000 0.74 32 lbs 10 RM7000 3 ANSI 125 FF 9.5 7000 17,900,000 0.80 48 lbs 10 RM11000 4 ANSI 125 FF 9.5 11000 28,100,000 0.82 60 lbs 10 RM16000 4 ANSI 125 FF 9.5 16000 40,900,000 1.42 62 lbs 100 based on 2500 BTU/ACF propane. Increases with pressure. See table below for capacity as function of line pressure of Rotary meters as function of Line Because propane vapor is compressible, the reading on a mechanical meter should be multiplied by the factor above to correct for line pressure. The pressure factor = (Line pressure + Atmospheric pressure)/base pressure. Assumes Patm = 14.48 PSIA, Pbase = 14.73 PSI Example: A meter installed in a 2 PSIG line reads 1250 CF. That equals 1250 CF x 1.119 x 2500 BTU/CuFt = 3,496,875 BTU Versions and Part Numbers CTR Mechanical Counter (Non TC) TC Mechanical Temperature Compensated Counter (TC) DCID Digital Counter with Instrument Drive (Non TC) AdEM - T Electronic Temperature Compensated Counter (ETC) Adem - PT Electronic Temp. & Press. Compensated Counter (PTZ) Example part number: RM3000-TC-Pulse = 2 RM3000, Temp Compensated w/ Pulse output Installation Considerations. Rotary meters should always be installed with flow going left to right or top to bottom. A Y strainer or gasket strainer should always be installed on the inlet GASKET STRAINERS RING Style # FULL FACE Style # 2 gasket strainer 60 Mesh PF700-2-60 PFF700-2-60 3 gasket strainer 60 Mesh PF700-3-60 PFF700-3-60 4 gasket strainer 60 Mesh PF700-4-60 PFF700-4-60

22 METER REPAIR SERVICE & REBUILT METERS Service Includes the following: InTest and Out Test on NIST Traceable Provers Complete Inspection & Replacement of worn or damaged parts Complete Cleaning and Repainting Testing Certificate of Accuracy Meter returned with 1 Year Guarantee Pete s Plugs and Other accessories or upgrades upon request Types of Meters Repaired & Calibrated: All Commercial Diaphragm Meters from Actaris/Schlumberger/Sprague from 400 1000 class, Invensys/Equimeter/Rockwell from 415 5000, AMCO/American/Singer, 425 5000 class Rotary Meters and Index Modules from Dresser, Romet, Invensys, Instromet, Schlumberger, Actaris, American 8C 102M Turbine Meters from American Meter, Invensys, Instromet, Schlumberger, Daniels 2 20 CVM (American) and Rotaseal (Rockwell) Master Meters and Transfer Provers Refurbished Commercial Diaphragm Meters Part# Sizes Weight (lbs) Dim. RE-AL800-TC 1 #, 2 50-70 13 x 14 x 24 RE-AL1400-TC 2, 3 120-132 16 x 17 x 29 RE-AL2300-TC 4 175-192 18 x 22 x 33 RE-AL5000-TC 4 310-327 24 x 26 x 40 All refurbished diaphragm meters are thoroughly rebuilt and are tested to the original meter manufacturer s specifications to meet ANSI B109.2. All moving parts are repaired and/or replaced. The meters are then cleaned, primed and painted. Final testing is done on NIST traceable provers. Non-TC and TC versions available. Pulse-output optional Refurbished Dresser Rotary Meters Part# Sizes End to End Distance Weight RE-8C-125-CTR-LMMA 1 #, 4.75 5 lbs RE-3M-175-TC-LMMA 2 FL 6.75 29 lbs RE-5M-175-TC-LMMA 3 FL 6.75 35 lbs RE-7M-175-TC-LMMA 3 FL 9.5 48 lbs RE-11M-175-TC-LMMA 4 FL 9.5 62 lbs RE-16M-175-TC-LMMA 4 FL 9.5 86 lbs We offer remanufactured & refurbished Dresser Roots LLMA and B3 rotary meters. Versions include: Counters (CTR), Temperature compensated (TC), Instrument Drive (ID), Temperature Compensated with Instrument Drive (TCID). Pulse Output is optional and canbe added to any meter. All meters are full tested to comply with ANSI B109.3

23 REMOTES & METER READING Pulse Output and Remote Totalizer Wired Solution for remote meter reading MPVL9-S Meter with DMP Pulser Features & Benefits: 8 Digit Lithium battery powered, wall mount, remote LCD totalizer. Battery lasts 10 years Works with any meter equipped with form- A pulse output (Diaphragm, Rotary or Dattus) Requires 2 conductor wire Itron ERT with Digi Internet Gateway Small Scale Wireless / Internet Based solution for meter reading Itron 100G ERT Transmitter Digi ERT / Ethernet gateway System overview: Each gas meter is equipped with an Itron 100G ERT Wireless transmitter. The 100G is a lithium powered transmitter that mounts directly on the meter. It has a 20 year battery life. The 100G transmits the meter reading which is picked up by a centrally located Digi ERT/Ethernet gateway. The gateway requires power and must be plugged into a router with internet connection. The Digi Gateway consolidates the reads of up to 10 meters and permits them to read over the internet using a smart-phone, I-Pad or computer. This solution is ideal for small commercial spaces with multiple meters such as strip malls or multi-family housing units. Itron ERTs with Handheld Full large scale wireless walk-by or drive-by meter reading solution Itron 100G ERT Transmitter Itron FC300 Handheld Itron MC Lite Mobile Collector Itron MVRS Software System overview: Each gas meter is equipped with an Itron 100G ERT Wireless transmitter. The 100G transmits the meter reading which is picked up either the FC300 handheld (walk by) or the MCLite Mobile Collector (drive-by). The MCLite is a combination of mobile & handheld AMR that can handle mixed drive-by and walk-by routes. Utilizing the compact in-vehicle dock and external multi-channel radio along with the FC300, Mobile Collector Lite collects consumption and tamper data for Itron endpoints. Meter readers can collect reads while driving at normal city driving speeds or they can remove the FC300 from the in-vehicle dock to collect manual or radio meter reads while reading the normal cycle route. A single MC Lite can read up to 10,000 meters on a single route with an outstanding read performance of 12 reads per second. When the meter reader returns to the office the FC300 is placed back in its cradle and downloads all reading and logging data via the MVRS software. This can then be used for billing and analysis.

24 METER ACCESSORIES Pulsers Form-A Pulsers can be added to almost any meter to provide a digital output to either a Building Management System (BMS) or to permit the meter to be read using a remote totalizer (see remotes on previous page) Meter valves Lock Wing type USI Lockwing Valves are! Turn Full Port Ball valves available in " to 2. Brass construction rated for 200 PSIG. CSA certified, Built in accordance with B16.33. Blow-out proof stem. Non insulated and Insulated versions available. Part # Pulses Per rev Mounts DMP 1 On Index Pulsimatic 1 Under Index Meter bars Meters Bars are used to facilitate the installation of diaphragm gas meters. The bar serves to aligning the inlet and outlet of the meter and support the meter. They can be specified with the swivels, nuts and gaskets pre-installed and tested to further reduce on site assembly of the set and to reduce potential leaks. Other options include integrated inlet valves (with lock wing), bypasses, taps and outlet unions. Non Ins Part # Size Insulated vers. # GV-3BL-FF 3/4" NPT GVI-3BL-FF GV-4BL-FF 1 NPT GVI-4BL-FF GV-5BL-FF 1.25 NPT NA GV-6BL-FF 1.5 NPT NA GV-7BL-FF 2 NPT NA Petes Plugs Pete s Plugs allow pressure to be taken without leaving costly gauges in line. 500 PSIG rating. Unique double self-closing core. Part # Desc MB-075-1A " in, " out, Swivels, Nuts, Gaskets, Union MB-100-20LT 1 in, 1 out, Swivels, Nuts, Gaskets, Union MB-125-30LT 1.25 in, 1.25 out, Swivels, Nuts, Gaskets, Union Meter prefabs A variety of prefabricated meter and regulator sets are available to make installations compact. Call for details Part # Type Size Length Material 12500 Plug 1/8 NPT 1.25 Brass/Neoprene 100 Plug 1/4" NPT 1.5 Brass/Neoprene 700 Plug 1/2" NPT 1.5 Brass/Neoprene 500 Probe 1/8 1.5 Brass/SS 510 Probe 1/16 1.5 Brass/SS Note: 12500 plug must use 510 probe Gas Tape UNASCO Gas Seal tape Yellow is high density PTFE, Silver is PTFE impregnated with Nickel for stainless steel applications. Also available in Journeyman rolls. AGA, CGA, & UL Approved Size Length Type Type 1/4" 260 Yellow Silver 1/2" 260 Yellow Silver 3/4" 260 Yellow Silver 1 260 Yellow Silver