Grades of Wheels Available Aluminum Oxide, use for Metals

A24R A60S A46N A36R Saitech XA24Q C24N C24R Grades of Wheels Available Aluminum Oxide, use for Metals Aluminum Oxide, use for Metals Aluminum Oxide, use for Aluminum Aluminum Oxide, Burr free, Stainless & Metals Made with patented 3M Cubitron grain, use for Stainless & Metals (long life fast cut) Nuclear and Food Processing plants (will not contaminate stainless) Use for Concrete, masonry and stone Silicone carbide, use for Concrete, masonry, brick and stone Type 27 Grinding Wheels Depressed Center Wheels A24R - Long Life, Metal Virgin aluminum oxide grain assures consistent high stock removal for tough applications All sizes are made with uniform grain throughout, no filler grain used in the backing All wheels internally reinforced with the highest quality fiberglass for maximum safety Super-Lock Hub on all 5/8-11 threaded wheels is the safest, vibration-free design 5/8-11 Super-Lock Hub A B C Max. Per Dia. Width Bore RPM A24R Box 4 1/4 3/8 13,500 /S20019 25 4 1/4 5/8 13,500 /S20013 25 4-1/2 1/4 7/8 13,300 /S20063 25 4-1/2 1/4 5/8-11 13,300 /S20163 10 5 1/4 7/8 12,200 /S20073 25 5 1/4 5/8-11 12,200 /S20173 10 6 1/4 7/8 10,200 /S20079 25 6 1/4 5/8-11 10,200 /S20076 10 7 1/4 7/8 8,500 /S20080 25 7 1/4 5/8-11 8,500 /S20086 10 9 1/4 7/8 6,600 /S20090 25 9 1/4 5/8-11 6,600 /S20096 10 See Milwaukee & Metabo Grinders on Pages 265 & 267 For Wire Wheels see Pages 242 & 243 Grinding Wheels XA24Q - Contaminant-Free Specially formulated for nuclear and food processing plants. Free of iron, chlorine and sulphur compounds (Fe + CI + S <0.1%). Will not contaminate stainless steel. STAINLESS METAL Stainless Steel and other high tensile alloys Ferrous metals (iron, steel, welds, etc.) A B C Max. Per Dia. Width Bore RPM Box 4-1/2 1/4 7/8 13,300 /S24210 25 5 1/4 7/8 12,200 /S24215 25 6 1/4 7/8 10,200 /S24220 25 7 1/4 7/8 8,500 /S24225 25 9 1/4 7/8 6,600 /S24230 25 A46N - Aluminum Special aluminum oxide formulation prevents loading on soft (non-ferrous) metals All sizes internally reinforced with the highest quality fiberglass for maximum safety and performance Super-Lock Hub on all 5/8-11 threaded wheels is the safest, vibration-free design A B C Max. Per Dia. Width Bore RPM A46N Box 4-1/2 1/4 7/8 13,300 /S20062 25 4-1/2 1/4 5/8-11 13,300 /S20162 10 7 1/4 7/8 8,500 /S20083 25 7 1/4 5/8-11 8,500 /S20088 10 Saitech Ultimate Performance (Stainless) Combines fast stock removal with long life Stainless steel and other high tensile alloys Ferrous metals (iron, steel, welds, etc.) Will not contaminate stainless steel Manufactured with patented 3M Cubitron grain to outlast aluminum oxide wheels Designed to provide very long life for fewer wheel changes and less down time A B C Max. Per Dia. Width Bore RPM Saitech Box 4 1/4 5/8 13,500 /S20014 25 4-1/2 1/4 7/8 13,300 /S20064 25 4-1/2 1/4 5/8-11 13,300 /S20164 10 7 1/4 7/8 8,500 /S20084 25 7 1/4 5/8-11 8,500 /S20089 10 C24N - Concrete Silicone carbide grain Soft bond for fast stock removal Masonry, concrete, stone Cast iron and other ferrous metals A B C Max. Per Dia. Width Bore RPM Box 4-1/2 1/4 7/8 13,300 /S20061 25 4-1/2 1/4 5/8-11 13,300 /S20161 10 5 1/4 5/8-11 12,200 /S20171 10 7 1/4 5/8-11 8,500 /S20087 10 226 Visit us on the WEB @ EBNinc.com

Cutting & Grinding Type 27 Specialty Pipeline Wheels Designed and manufactured to perform both cutting and light grinding Depressed Center Cutting Wheels A60S - General Purpose Ferrous metals (iron, steel, welds, etc.) Fast burr-free cutting A46N - Aluminum (Non-Ferrous Metals) Non-ferrous metals (aluminum, copper, brass, etc.) Ferrous Metals 5/8-11 Super-Lock Hub A B C Max. Per Dia. Width Bore RPM Pipeline Box 3 1/8 3/8 18,000 /S22005 25 4-1/2 1/8 7/8 13,300 /S22030 25 5 1/8 7/8 12,200 /S22040 25 6 1/8 5/8-11 10,200 /S22046 10 7 1/8 5/8-11 8,500 /S22052 10 9 1/8 5/8-11 6,600 /S22062 10 Saitech Cutting & Light Grinding Saitech Pipeline (S Pipe) for Stainless Designed and manufactured to perform both high performance cutting and light grinding Long life combined with versatility for the pipeline industry Stainless steel, high tensile alloys Ferrous metals (iron, steel, welds, etc.) A B C Max. Per Dia. Width Bore RPM S Pipe Box 4-1/2 1/8 7/8 13,300 /S22264 25 4-1/2 1/8 5/8-11 13,300 /S22269 10 5 1/8 7/8 12,200 /S22274 25 7 1/8 5/8-11 8,500 /S22289 10 9 1/8 5/8-11 6,600 /S22299 10 Unique, thin Type 27 shape can be used on all angle grinders in accordance with ANSI B7.1 Special Aluminum Oxide formulation offers the fastest cutting, longest lasting thin wheels Externally reinforced with fiberglass layers to provide ultimate safety in a thin wheel Grades Available A B C Max. Per Dia. Width Bore RPM A60S A46N Box 4.045 5/8 19,000 /S22011 /S22340 50 4-1/2.045 7/8 13,300 /S22021 /S22345 50 5.045 7/8 12,200 /S22071 /S22350 50 6.045 7/8 10,200 /S22047 /S22360 50 7.045 7/8 8,500 /S22053 /S22370 50 Saitech Cutting for Stainless.045" Saitech High Performance Wheels Fast cutting with long life Stainless steel, high tensile alloys Ferrous metals (iron, steel, welds, etc.) Manufactured with patented 3M Cubitron grain to outlast aluminum oxide wheels Unique bonding system lets you make faster burr-free cuts Designed to provide very long life for fewer wheel changes and less down time All sizes reinforced with the highest quality fiberglass for maximum safety and performance For Milwaukee & Metabo Power Tools see Pages 248-267 See Wire Wheels on Pages 242 & 243 Diamond Wheels on Pages 222 & 223 A B C Max. Per Dia. Width Bore RPM.045 Box 4.045 5/8 19,000 /S22068 50 4-1/2.045 7/8 13,300 /S22072 50 5.045 7/8 12,200 /S22073 50 6.045 7/8 10,200 /S22082 50 7.045 7/8 8,500 /S22088 50 Types 28 & 29 are Available Visit us on the WEB @ EBNinc.com 227

Type 29 Flexible Grinding/Blending Wheels Challenger II Aluminum oxide grain Open pattern on wheel for cool grinding and blending Safe for use in the nuclear industry Metal: Steel, iron aluminum, brass, bronze Stainless steel Also for use on plastic, fiberglass, masonry, wood Type 29 shape allows easy control in grinding and blending applications Honeycomb, dimpled pattern on face allows for greater cooling action and longer life Grind and blend welds in one-step, no need for multiple steps and products Available in many grits for all your grinding and blending needs /Grits A C Max. Challenger II Per Dia. Bore RPM 24 36 60 100 Box 4-1/2 7/8 13,280 - /S27500 /S27501 /S27502 25 5 7/8 12,200 - /S27506 /S27507 /S27508 25 7 7/8 8,600 /S27510 /S27511 /S27512 /S27513 25 Quick Tip: Use Challenger II for longer life in aggressive applications. Also Available: Type 11 Cup Stones Type 16, 17, 18 Cones & Plugs Type 1 Thin High Speed Cut-Off Wheels A24R - General Purpose - Metal A24R - General Purpose Ferrous Metals, (Iron, Steel, Welds, etc.) A36T - Fast Cutting Metal Hard bond for aggressive cutting on tough applications Metal (Iron, Steel, Welds, etc.) Stainless Steel A60S - Metal Use with reusable 5/8-11 adaptor to fit angle grinders Extremely fast cutting with long life Ferrous and Non Ferrous-Metals (Iron, Steel, Welds, etc.) Part Nos. A B C Max. Per Dia. Width Bore RPM A24R A36T A60S Box 2 1/16 1/4 30,558 - /S23004-50 2 1/16 3/8 30,558 - /S23002-50 2.035 1/4 30,558 - /S23012-100 2.035 3/8 30,558 - /S23010-100 2-1/2 1/16 1/4 24,446 - /S23022-50 2-1/2 1/16 3/8 24,446 - /S23020-50 2-1/2.035 1/4 24,446 - /S23032-100 2-1/2.035 3/8 24,446 - /S23030-100 3 1/16 1/4 25,000 - /S23042-50 3 1/16 3/8 25,000 - /S23040-50 3.035 1/4 25,000 - /S23052-100 3.035 3/8 25,000 - /S23050-100 3 1/8 3/8 20,372 /S23060 - - 25 4 1/16 1/4 19,000 - /S23067-50 4 1/16 3/8 19,000 - /S23065-50 4 1/16 5/8 19,000 - /S23061-50 4.035 1/4 19,000 - /S23071-100 4.035 3/8 19,000 - /S23069-100 4.035 5/8 19,000 - /S23063-100 4.045 5/8 19,000 - - /S23099 50 4 1/8 3/8 15,278 /S23075 - - 25 4-1/2.045 7/8 13,300 - - /S23101 50 5.045 7/8 12,200 - - /S23103 25 6 1/16 1/2 10,186 - /S23202-50 6 1/16 5/8 10,186 - /S23200-50 6.035 1/2 10,186 - /S23206-50 6.035 7/8 10,186 - /S23210-50 6.035 5/8 10,186 - /S23204-50 6.045 5/8 10,200 - - /S23105 50 6.045 7/8 10,200 - - /S23106 50 7 1/16 1-1/4 8,732 - /S23250-50 7 1/16 5/8 8,732 - /S23265-50 7.035 1-1/4 8,732 - /S23252-50 7.045 5/8 8,500 - - /S23107 50 8 1/16 5/8 7,640 - /S23275-50 8 1/16 1-1/4 7,640 - /S23277-50 1/4" Shank adaptors available. Stainless Steel cutting wheels available. Type A, B, W Mounted Points Shank length 1-1/2" Quick Tip: Try.045 sizes for longer life and better value. 228 Visit us on the WEB @ EBNinc.com

Type 1 Portable Saw Cut-Off Wheels A24R - General Purpose - Metal Type 1 Thin High Speed Cut-Off Wheels Type 1 shape for square, burr-free cutting Special aluminum oxide formulation offers the fastest cutting, longest lasting thin wheels Externally reinforced with fiberglass layers to provide ultimate safety in a thin wheel Wide range of sizes available to fit both angle grinders and circular saws. Aluminum oxide grain Provides consistent performance with long life Metal: Ferrous metals (steel, angle iron, rebar) Type 1 shape for square, burr-free cutting Externally reinforced with the highest quality fiberglass to withstand the toughest applications Available in many arbor sizes to fit a wide variety of tools A60S - General Purpose A46N - Aluminum Saitech - Stainless Steel Patented 3M Cubitron grain formulation outlasts standard aluminum oxide wheels A B C Max. Per Dia. Width Bore RPM A60S A46N Saitech Box 4.045 5/8 19,000 /S23099 /S23304 /S23172 50 4-1/2.045 7/8 13,300 /S23101 /S23314 /S23174 50 5.045 7/8 12,200 /S23103 /S23315 /S23177 50 6.045 5/8 10,200 /S23105 /S23310 /S23181 50 6.045 7/8 10,200 /S23106 /S23316 /S23182 50 7.045 5/8 8,500 /S23107 /S23317 /S23184 50 Note: Reusable 5/8-11 adaptor for use on Type 1 and Type 27 reinforced wheels with a 7/8 arbor, a maximum diameter of 5" and a wheel thickness of.045 to 1/8" available. Type 27 Thin High Speed Cut-Off Wheels Circular Saw A B C Max. Per Dia. Width Bore RPM A24R Box 7 3/32 5/8 8,500 /S23230 25 7 3/32 Dia. (5/8) 8,500 /S23234 25 Type 1 Portable Saw Cut-Off Wheels C24R - Concrete Silicone carbide grain Long life Concrete: Stone, brick, soft aggregate, masonry, concrete A B C Max. Per Dia. Width Bore RPM A60S A46N Saitech Box 4.045 5/8 19,000 /S22011 /S23340 /S22068 50 4-1/2.045 7/8 13,300 /S22021 /S22345 /S22072 50 5.045 7/8 12,200 /S22071 /S22350 /S22073 50 6.045 5/8 10,200 50 6.045 7/8 10,200 /S22047 /S22360 /S22082 50 7.045 5/8 8,500 50 7.045 7/8 8,500 /S22053 /S22370 /S23337 50 Note: Reusable 5/8-11 adaptor for use on Type 1 and Type 27 reinforced wheels with a 7/8 arbor, a maximum diameter of 5" and a wheel thickness of.045 to 1/8" available. Visit us on the WEB @ EBNinc.com Circular Saw A B C Max. Per Dia. Width Bore RPM C24R Box 7 3/32 5/8 8,500 /S23231 25 7 3/32 Dia. (5/8) 8,500 /S23235 25 New Items are constantly added to keep our stock up to date. Send us your orders or inquiries when you want an item not listed. 229

Type 1 Chop Saw Wheels Type 1 Stationary Cut-Off Wheels A24R - Long Life - Metal A36R - Burr-Free - Metal & Stainless C24R - Concrete, Masonry, Stone, Brick Specially formulated for use on low horsepower chop saw machines for fast cutting with minimal pressure Four specialty formulas give you the exact wheel for your cutting application Externally reinforced with the highest quality fiberglass to withstand the toughest applications A B C Max. Per Dia. Width Bore RPM A24R A36R C24R Box 10 1/8 5/8 6,100 /S24000 /S24002 /S24003 25 10 1/8 1 6,100 /S24004 - /S24007 25 12 1/8 1 5,100 /S24020 - /S24023 10 14 1/8 1 4,400 /S24040 /S24042 /S24043* 10 16 5/32 1 3,800 /S24070 /S24072 /S24073* 10 18 3/16 1 3,400 /S24080 /S24082 /S24083* 5 20 3/16 1 3,000 /S24090 /S24092-5 24 1/4 1 3,150 /S24100 /S24102-5 * with Pinhole Stationary Saw Stud King Metal: Metal studding, thin rebar, light gauge metals Iron Worker Metal: Structural metal applications Saitech Steel Worker Type 1 Portable Saw Cut-Off Wheels A24R - General Purpose - Metal Ferrous metals (Iron, steel, welds, etc.) A30S - Long Life Ferrous metals Stainless steel, high tensile alloys, etc. Stainless: Stainless steel, high tensile alloys Aluminum Metal: Non-ferrous metals (aluminum, bronze, brass, etc.) Chop Saw A B C Max. Challenger II Per Dia. Width Bore RPM S.K. I.W. Saitech Alum. Box 10 3/32 5/8 6,100 /S24035 - - - 25 12 3/32 1 5,100 /S24030 /S24031 - - 10 12 3/32 1 5,100 - - /S24033-10 14 3/32 1 4,400 /S24050 /S24051 - - 10 14 3/32 1 4,400 - - /S24053-10 14 3/32 1 4,400 - - /S24052 10 16 3/32 1 3,700 /S24010 /S24011 - - 10 16 3/32 1 3,700 - - /S24013-10 Portable Saw A B C Max. Per Dia. Width Bore RPM A24R A30S Box 12 1/8 1 6,300 /S23410-10 12 1/8 1 6,300 - /S23430 10 12 1/8 7/8 6,300 /S23400-10 12 1/8 7/8 6,300 - /S23431 10 12 1/8 20mm 6,300 /S23420-10 12 1/8 20mm 6,300 - /S23432 10 14 1/8 1 5,400 /S23450-10 14 1/8 1 5,400 - /S23440 10 14 1/8 20mm 5,460 /S23455-10 14 1/8 20mm 5,460 - /S23441 10 16 1/8 1 4,800 /S23459-10 16 1/8 20mm 4,800 /S23470-10 230 Visit us on the WEB @ EBNinc.com

Portable Saw Cut-Off Wheels Type 1 Portable Saw Cut-Off Wheels Brute Extremely hard bond for cutting metals that present a very sharp edge to the wheel Metal: Thin metal, sheet metal, decking, other ferrous metals Hobo Rugged fiberglass reinforcement for maximum safety Excellent for the railroad industry Metal: Mainline, secondary, spur rail steel Ductile Combination aluminum oxide and silicone carbide formulation Metal: Ductile pipe (very hard steel casing enclosing a cement lining), water mains, etc. Concrete: Combination metal/concrete, cast iron, hard metals, concrete coated steel, etc. Quick Tip: Use a Ductile wheel for extra hard metals, hydraulic hose, and PVC pipe. A B C Max. Part Per Dia. Width Bore RPM No. Box Brute 12 1/8 1 6,300 /S23412 10 12 1/8 20mm 6,300 /S23422 10 14 1/8 1 5,400 /S23452 10 14 1/8 20mm 5,460 /S23457 10 Hobo 14 1/8 1 5,400 /S23501 10 16 1/8 1 4,800 /S23502 10 Ductile 12 1/8 1 6,300 /S23415 10 12 1/8 20mm 6,300 /S23425 10 14 1/8 1 5,400 /S23453 10 14 1/8 20mm 5,460 /S23458 10 16 1/8 1 4,800 /S23480 10 16 1/8 20mm 4,800 /S23478 10 * with Pinhole 14" (20mm) with higher RPM rating for Stihl saws. Cotton Fiber Blending & Finishing Wheels Available Portable Saw Big M.A.C. - Very Long Life Special silicone carbide grain Superior cutting action 40% longer life than general purpose concrete wheels Concrete: Masonry, Asphalt, Concrete C24R - Concrete Stone, brick, soft aggregate, masonry, concrete Type 1 shape for square, burr-free cutting Externally reinforced with the highest quality fiberglass to withstand the toughest applications Available in many arbor sizes to fit a wide variety of tools Mac A B C Max. Part Per Dia. Width Bore RPM No. C24R Box 12 1/8 1 6,300 /S23460 /S23413 10 12 1/8 7/8 6,300 - /S23402 10 12 1/8 20mm 6,300 /S23462 /S23423 10 14* 1/8 1 5,400 /S23463 /S23451* 10 14 1/8 20mm 5,460 /S23464 /S23456 10 16 1/8 1 4,800 - /S23461 10 16 1/8 20mm 4,800 - /S23466 10 * with Pinhole Street Saw Wheels Silicone Carbide Grain C16 Fast, free cutting Concrete: Green concrete and asphalt Street Runner Combines fast cutting with extra-long life Concrete: Green concrete and asphalt C24R General purpose Long life Concrete: Masonry, concrete, brick These wheels can be used with cooling sprays for dust-free cutting needs A B C Max. Per Dia. Width Bore RPM C16 C24R S.R. Box 14 1/8 1 4,400 /S24045 - - 10 14 3/16 1 4,400 /S24061 /S24060-5 14 1/4 1 4,400 /S24066 /S24065-5 14 3/16 1 4,365 - - /S24130 10 14 1/4 1 4,365 - - /S24131 10 18 1/4 1 3,000 - - /S24145 5 All wheels have Pinhole Portable Saw Street Saw See Diamond Wheels on Pages 222 & 223 Many other abrasive/cutting type tools available. Please call if you don t see what you are looking for. Visit us on the WEB @ EBNinc.com 231

Mounted Points Bench Wheels A Aluminum oxide grain General purpose For sharpening tools and light stock removal GC Green silicon carbide grain Extremely sharp grain for faster, burr-free cutting Use on carbide tipped tools, cast iron Metal: Ferrous and/or non-ferrous metals Reduction Bushings enclosed with each wheel Aluminum Oxide Grades Available A B C Max. Part Nos. Dia. Width Bore RPM A24 A36 A46 A60 A80 6 1/2 1 4,138 - /S28003 - /S28004 /S28005 6 3/4 1 4,138 - /S28000 - /S28001 /S28002 6 1 1 4,138 - /S28006 - /S28007 /S28008 7 3/4 1 3,600 - /S28010 - /S28011 /S28012 7 1 1 3,600 - /S28013 - /S28014 /S28015 8 3/4 1 3,600 - /S28020 /S28021 /S28022 8 1 1 3,600 - /S28023 - /S28024 /S28025 10 1 1-1/4 2,483 - /S28040 /S28043 /S28041 /S28042 10 1-1/2 1-1/4 2,483 - /S28050 /S28053 /S28051 /S28052 12 2 1-1/2 2,069 /S28060 /S28063 /S28061 /S28062-14 2 1-1/2 1,773 /S28070 /S28073 /S28071 /S28072 - Green Silicon Carbide Bench Grinder Grades Available A B C Max. Dia. Width Bore RPM GC60 GC80 GC120 6 3/4 1 4,138 /S28100 /S28101 /S28102 6 1 1 4,138 /S28103 /S28104 /S28105 7 1 1 3,600 /S28113 /S28114 /S28115 8 1 1 3,600 /S28123 /S28124 /S28125 10 1 1-1/4 2,483 /S28140 /S28141 /S28142 10 1-1/2 1-1/4 2,483 /S28150 /S28151 /S28152 12 2 1-1/2 2,069 /S28160 /S28161 /S28162 14 2 1-1/2 1,773 /S28170 /S28171 /S28172 A60R Aluminum oxide grain For deburring and finishing Metal: Ferrous metals Shank length 1-1/2" Die Grinder Shank Part O = 1/2" Type Dia. Length Dia. No. Max. RPM Per Box A1 3/4 2-1/2 1/4 /S27010 19,800 10 A3 1 2-3/4 1/4 /S27020 16,100 10 A4 1-1/4 1-1/4 1/4 /S27030 30,560 10 A5 3/4 1-1/8 1/4 /S27035 45,000 10 A11 7/8 2 1/4 /S27040 19,860 10 A12 11/16 1-1/4 1/4 /S27050 48,000 10 A21 1 1 1/4 /S27060 34,500 10 A25 1 Round 1/4 /S27070 35,620 10 A36 1-5/8 3/8 1/4 /S27086 23,520 10 A38 1 1 1/4 /S27088 34,500 10 B52 3/8 3/4 1/8 /S27110 45,370 20 B111 7/16 11/16 1/8 /S27120 33,750 20 B121 1/2 1/2 1/8 /S27130 45,370 20 W160 1/4 1/4 1/8 /S27308 81,370 10 W177 3/8 3/4 1/8 /S27310 33,750 20 W189 1/2 2 1/4 /S27327 24,000 10 W196 5/8 1 1/4 /S27329 35,250 10 W204 3/4 3/4 1/4 /S27320 42,750 10 W208 3/4 2 1/4 /S27330 18,750 10 W215 1 1/8 1/8 /S27338 38,200 10 W220 1 1 1/4 /S27360 25,500 10 W222 1 2 1/4 /S27340 15,900 10 W225 1-1/4 1/4 1/4 /S27350 30,560 10 W236 1-1/2 1/4 1/4 /S27349 25,470 10 Mandrel overhang O must always be the lowest possible. Maximum speeds given refer to overhang 0 equal to 1/2" 232 Visit us on the WEB @ EBNinc.com

SB (End Cut) SH Burs Tungsten Carbide Burs Shapes SA Die Grinder SC SD SE SF SG SL SM Shank Part Type Dia. Length Dia. No. Per Box DOUBLE CUT (Alternate Cut) SA1 1/4 5/8 1/4 /S45000 1 SA3 3/8 3/4 1/4 /S45001 1 SA5 1/2 1 1/4 /S45002 1 SB1 1/4 5/8 1/4 /S45111 1 SB3 3/8 3/4 1/4 /S45004 1 SB5 1/2 1 1/4 /S45113 1 SC1 1/4 5/8 1/4 /S45005 1 SC3 3/8 3/4 1/4 /S45006 1 SC5 1/2 1 1/4 /S45007 1 SD1 1/4 7/32 1/4 /S45010 1 SD3 3/8 5/16 1/4 /S45011 1 SD5 1/2 7/16 1/4 /S45012 1 SE1 1/4 3/8 1/4 /S45015 1 SE5 1/2 7/8 1/4 /S45016 1 SF1 1/4 5/8 1/4 /S45020 1 SF3 3/8 3/4 1/4 /S45021 1 SF5 1/2 1 1/4 /S45022 1 SH1 1/4 5/8 1/4 /S45115 1 SH2 5/16 3/4 1/4 /S45116 1 SH5 1/2 1-1/4 1/4 /S45117 1 SL1 1/4 5/8 1/4 /S45025 1 SL3 3/8 1-1/16 1/4 /S45026 1 SL4 1/2 1-1/8 1/4 /S45027 1 SG1 1/4 5/8 1/4 /S45030 1 SG3 3/8 3/4 1/4 /S45031 1 SG5 1/2 1 1/4 /S45032 1 SM1 1/4 1/2 1/4 /S45035 1 SM2 1/4 3/4 1/4 /S45036 1 SM4 3/8 3/4 1/4 /S45037 1 SM5 1/2 1 1/4 /S45038 1 NON-FERROUS (Aluminum) SA3NF 3/8 3/4 1/4 /S45050 1 SA5NF 1/2 1 1/4 /S45051 1 SC3NF 3/8 3/4 1/4 /S45052 1 SF3NF 3/8 3/4 1/4 /S45053 1 SF5NF 1/2 1 1/4 /S45054 1 SL4NF 1/2 1-1/8 1/4 /S45055 1 HEAVY DUTY SA5 1/2 1 1/4 /S45125 1 SC5 1/2 1 1/4 /S45130 1 SE5 1/2 7/8 1/4 /S45135 1 SF3 3/8 3/4 1/4 /S45140 1 SF5 1/2 1 1/4 /S45145 1 SG5 1/2 1 1/4 /S45150 1 SL3 3/8 1-3/16 1/4 /S45155 1 SL4 1/2 1-1/4 1/4 /S45160 1 Shank Part Type Dia. Length Dia. No. Per Box 6" LENGTH SHANK SA3L6 3/8 3/4 1/4-6L /S45603 1 SA5L6 1/2 1 6L /S45605 1 SB1L6 1/4 5/8 6L /S45611 1 SB3L6 3/8 3/4 6L /S45613 1 SC3L6 3/8 3/4 6L /S45623 1 SD1L6 1/4 7/32 6L /S45631 1 SD3L6 3/8 5/16 6L /S45633 1 SE5L6 1/2 7/8 6L /S45645 1 SF3L6 3/4 3/4 6L /S45653 1 SF5L6 1/2 1 6L /S45655 1 SG3L6 3/8 3/4 6L /S45663 1 SG5L6 1/2 1 6L /S45665 1 SH2L6 5/16 3/4 6L /S45672 1 SL3L6 3/8 1-1/16 6L /S45683 1 SM3L6 1/4 1 6L /S45693 1 SC3NFL6 3/8 3/4 6L /S45063 1 SF3NFL6 3/8 3/4 6L /S45073 1 SD3NFL6 3/8 5/16 6L /S45083 1 Other sizes & types may be available. Please call EBN. Fiber Discs Available in 2A, 3A, Z, 3Z Aluminum oxide grain General purpose Aluminum Oxide METAL WOOD Ferrous and/or non-ferrous metals Wood, fiberglass, etc. Per Box Grit 100 2A 24 20 /S56024 36 20 /S56036 50 25 /S56050 4 x 5/8 60 25 /S56060 80 25 /S56080 100 25 /S56100 120 25 /S56120 24 15 /S51024 36 15 /S51036 50 15 /S51050 4-1/2 x 7/8 60 15 /S51060 80 15 /S51080 100 15 /S51100 120 15 /S51120 24 15 /S53024 36 15 /S53036 50 15 /S53050 5 x 7/8 60 15 /S53060 80 15 /S53080 100 15 /S53100 120 15 /S53120 16 - /S57016 24 15 /S57024 36 15 /S57036 50 15 /S57050 7 x 7/8 60 15 /S57060 80 15 /S57080 100 15 /S57090 120 15 /S57120 16 - /S58016 24 15 /S58024 36 15 /S58036 50 15 /S58050 9-1/8 x 7/8 60 15 /S58060 80 15 /S58080 100 15 /S58090 120 15 /S58120 Visit us on the WEB @ EBNinc.com 233

Also Available Paper Disc Fiber Discs (Cont.) Zirconium Zirconium grain Closed coat structure for aggressive stock material and long life STAINLESS METAL Stainless steel, high tensile alloys Ferrous and/or non-ferrous metals (iron, steel, welds, etc.) Grit Grit Zirconium Part # 24 24 /S59224 36 36 /S59236 4-1/2 x 7/8 50 5 x 7/8 50 /S59250 60 60 /S59260 80 80 /S59280 24 24 /S59624 36 36 /S59636 7 x 7/8 50 9-1/8 x 7/8 50 /S59650 60 60 /S59660 80 80 /S59680 Use the Zirconium fiber disc for aggressive stock removal on carbon steel 2A Laminated Discs Sait-Lok-R Nylon screw threaded hub for easy mounting to the backing pad Aluminum oxide grain General purpose, long life Easy disc changes by twisting to unlock backing pad METAL Ferrous and/or non-ferrouse metals WOOD Wood, plastic, fiberglass, ect. Z Premium zirconium grain Very fast stock removal, long life Easy disc changes by twisting to unlock backing pad STAINLESS Stainless steel, high tensile alloys WOOD Portable Grinder Ferrous and/or non-ferrous metals (iron, steel, welds, ect.) Grit 2A Box Z 36 /S52264 100 /S55264 40 /S52265 100 /S55265 50 /S52266 100 /S55266 1-1/2" 60 /S52267 100 /S55267 80 /S52268 100 /S55268 100 /S52269 100-120 /S52270 100-36 /S52271 100 /S55271 40 /S52272 100 /S55272 50 /S52273 100 /S55273 2" 60 /S52274 100 /S55274 80 /S52275 100 /S55275 100 /S52276 100-120 /S52277 100 - Grit Box 36 /S52278 50 /S55278 40 /S52279 50 /S55279 50 /S52280 50 /S55280 3" 60 /S52281 50 /S55281 80 /S52282 50 /S55282 100 /S52283 50-120 /S52284 50 - Flap Discs High Performance Saitlam (Flat Shape) Available in 2A aluminum oxide, 3A aluminum oxide, and Z zirconium Nylon 6/6 backing - a non-scratching, high strength backing resistant to temperature extremes, common chemicals, and solvents Part Mat l Dia. Arbor Grit No. 4 5/8 40 /S73240 4 5/8 60 /S73260 4 5/8 80 /S73280 2A 4 5/8 120 /S73220 General 4-1/2 7/8 40 /S73440 Purpose 4-1/2 7/8 60 /S73460 Aluminum 4-1/2 7/8 80 /S73480 Oxide 4-1/2 7/8 120 /S73420 6-1/2 7/8 36 /S73636 6-1/2 7/8 50 /S73650 6-1/2 7/8 60 /S73660 6-1/2 7/8 80 /S73680 6-1/2 7/8 120 /S73620 4 5/8 40 /S73040 4 5/8 60 /S73060 4 5/8 80 /S73080 3A 4 5/8 120 /S73020 Aluminum 4-1/2 7/8 40 /S73340 Oxide 4-1/2 7/8 60 /S73360 With 4-1/2 7/8 80 /S73380 Grinding 4-1/2 7/8 120 /S73320 Aid 6-1/2 7/8 36 /S73836 6-1/2 7/8 50 /S73850 6-1/2 7/8 60 /S73860 6-1/2 7/8 80 /S73880 6-1/2 7/8 120 /S73820 Packaging RPM s for Saitlam 4" 10/box with nut 4" 13,000 4-1/2" 10/box with nut 4-1/2" 11,000 6-1/2" 10/box with backing pad and nut 6-1/2" 8,600 Note: 4" and 4-1/2" Saitlam must be used with nut. 6-1/2" must be used with backing pad and nut 234 Visit us on the WEB @ EBNinc.com

Flap Discs (Cont.) High Performance (Cont.) Saitlam (Flat Shape) (Cont.) Part Mat l Dia. Arbor Grit No. 4 5/8 40 /S73140 4 5/8 50 /S73150 4 5/8 60 /S73160 Z 4 5/8 80 /S73180 Zirconium 4-1/2 7/8 40 /S73540 For 4-1/2 7/8 50 /S73550 Stainless 4-1/2 7/8 60 /S73560 Steel 4-1/2 7/8 80 /S73580 6-1/2 7/8 36 /S73736 6-1/2 7/8 50 /S73750 6-1/2 7/8 60 /S73760 6-1/2 7/8 80 /S73780 Packaging RPM s for Saitlam 4" 10/box with nut 4" 13,000 4-1/2" 10/box with nut 4-1/2" 11,000 6-1/2" 10/box with backing pad and nut 6-1/2" 8,600 Note: 4" and 4-1/2" Saitlam must be used with nut. 6-1/2" must be used with backing pad and nut See Page 240 & 241 for Backing Pads Saitlam F (Conical Shape, Fiberglass Backing) Available in 2A aluminum oxide, 3A aluminum oxide, and Z zirconium Fiberglass backing will not splinter or smear on the workpiece Backing wears with the abrasive cloth Go from stock removal to finishing with one disc 10/Box Part Mat l Dia. Length Grit No. 4-1/2 7/8 40 /S75440 4-1/2 7/8 50 /S75450 4-1/2 7/8 60 /S75460 4-1/2 7/8 80 /S75480 4-1/2 7/8 120 /S75420 4-1/2 5/8-11 40 /S76440 2A 4-1/2 5/8-11 50 /S76450 General 4-1/2 5/8-11 60 /S76460 Purpose 4-1/2 5/8-11 80 /S76480 Aluminum 4-1/2 5/8-11 120 /S76420 Oxide 5 7/8 40 /S75540 5 7/8 50 /S75550 5 7/8 60 /S75560 5 7/8 80 /S75580 5 7/8 120 /S75520 5 5/8-11 40 /S76540 5 5/8-11 50 /S76550 5 5/8-11 60 /S76560 5 5/8-11 80 /S76580 5 5/8-11 120 /S76520 Saitlam F (Conical Shape, Fiberglass Backing) (Cont.) 10/Box Part Mat l Dia. Length Grit No. 7 7/8 40 /S75740 7 7/8 50 /S75750 2A 7 7/8 60 /S75760 General 7 7/8 80 /S75780 Purpose 7 7/8 120 /S75720 Aluminum 7 5/8-11 40 /S76740 Oxide 7 5/8-11 50 /S76750 7 5/8-11 60 /S76760 7 5/8-11 80 /S76780 7 5/8-11 120 /S76720 4-1/2 7/8 40 /S73341 4-1/2 7/8 60 /S73361 4-1/2 7/8 80 /S73381 4-1/2 7/8 120 /S73321 4-1/2 5/8-11 40 /S74341 4-1/2 5/8-11 60 /S74361 4-1/2 5/8-11 80 /S74381 4-1/2 5/8-11 120 /S74321 5 7/8 40 /S73804 5 7/8 60 /S73806 3A 5 7/8 80 /S73808 Aluminum 5 7/8 120 /S73802 Oxide 5 5/8-11 40 /S74804 With 5 5/8-11 60 /S74806 Grinding 5 5/8-11 80 /S74808 Aid 5 5/8-11 120 /S74802 7 7/8 40 /S73704 7 7/8 50 /S73705 7 7/8 60 /S73706 7 7/8 80 /S73708 7 7/8 120 /S73702 7 5/8-11 40 /S74704 7 5/8-11 50 /S74705 7 5/8-11 60 /S74706 7 5/8-11 80 /S74708 7 5/8-11 120 /S74702 4-1/2 7/8 40 /S73940 4-1/2 7/8 50 /S73950 4-1/2 7/8 60 /S73960 4-1/2 7/8 80 /S73980 4-1/2 7/8 120 /S73920 4-1/2 5/8-11 40 /S74940 4-1/2 5/8-11 50 /S74950 4-1/2 5/8-11 60 /S74960 4-1/2 5/8-11 80 /S74980 4-1/2 5/8-11 120 /S74920 5 7/8 40 /S73941 5 7/8 50 /S73951 Z 5 7/8 60 /S73961 Zircomium 5 7/8 80 /S73981 For 5 7/8 120 /S73921 Stainless 5 5/8-11 40 /S74941 Steel 5 5/8-11 50 /S74951 5 5/8-11 60 /S74961 5 5/8-11 80 /S74981 5 5/8-11 120 /S74921 7 7/8 40 /S73942 7 7/8 50 /S73952 7 7/8 60 /S73962 7 7/8 80 /S73982 7 7/8 120 /S73922 7 5/8-11 40 /S74942 7 5/8-11 50 /S74952 7 5/8-11 60 /S74962 7 5/8-11 80 /S74982 7 5/8-11 120 /S74922 Packaging RPM s for Saitlam 4-1/2" x 7/8" 10/box 4-1/2" 13,300 4-1/2" x 5/8-11 10/box 5" 12,200 5" x 7/8" 10/box 7" 8,500 5" x 5/8-11 10/box 7" x 7/8" 10/box 7" x 5/8-11 10/box Visit us on the WEB @ EBNinc.com 235

Flap Discs (Cont.) Big Cat Flap Discs Applications: Provides increased conformability and long life when: Weld Blending Grinding Deburring Deflashing Stock removal Surface finishing and blending Edge chamfering Big Cat - High Density Flat Style (Type 27) A thicker disc with larger flaps which conforms to curved and irregular surfaces while producing a consistent finish. 30-40% longer life than standard flap discs. Ideal for a working angle less than 15. Phenolic Backing Arbor Grit Max. Zirconium Aluminum Oxide Dia. Hole RPM /W50803 /W50763 4-1/2" 7/8" 40 12,000 /W50804 /W50764 60 /W50805 /W50765 80 /W50806 /W50766 120 /W50808-4-1/2" 5/8"-11 40 12,000 /W50809 - Nut 60 /W50810-80 /W50823 /W50783 7" 7/8" 40 8,600 /W50824 /W50784 60 /W50825 /W50785 80 /W50826 /W50786 120 /W50843 /W50833 7" 5/8"-11 40 8,600 /W50844 /W50834 Nut 60 /W50845 /W50835 80 /W50846 /W50836 120 Standard Package is 10/Box Tiger Discs Applications: Use on right angle air die grinders for: Grinding, deburring and blending on steel, stainless steel and other metals Jobs requiring high aggression and rapid stock removal Metal fabrication requiring light weld blending or edge chamfering Weld blending on an automotive part. Blending excess brazing material on a machine component. Tiger Discs for Stainless Steel Made with specially formulated, fast-cutting abrasive cloth which prevents dulling and glazing of abrasive grains leading to consistently high cut rates. 50-65% more abrasive cloth than conventional flap discs disc life is extended resulting in the lowest costper-piece finished. High density flat configuration adds flexibility which promotes smoother grinding action and reduces the possibility of damage to high-value stainless parts. Tiger Discs for Stainless Steel (Cont.) Designed to work under lighter pressures which minimizes gouging, undercutting, heat discoloration and thermal distortion, and reduces operator fatigue. Applications: For stainless steel applications such as: Weld blending Grinding Heavy deburring Deflashing Stock removal and dressing Finishing and blending Edge chamfering 60 Grit: For maximum cut rate; 80 Grit: for superior finish Arbor Grit Max. Phenolic Backing Dia. Hole RPM /W50864 4-1/2" 7/8" 60 12,000 /W50865 80 /W50869 4-1/2" 5/8"-11 60 12,000 /W50870 Nut 80 /W50884 7" 7/8" 60 8,600 /W50885 80 /W50894 7" 5/8"-11 60 8,600 /W50895 Nut 80 Standard Package is 10/Box BobCat - Flat Style (Type 27) Used on right angle air die grinders for smooth grinding and enhanced conformability. Small size allows access to confined areas. Grit Max. Zirconium Dia. RPM /W50932 2" 36 30,000 /W50933 40 /W50934 60 /W50935 80 /W50936 120 /W50912 3" 36 20,000 /W50913 40 /W50914 60 /W50915 80 /W50916 120 Standard Package is 10/Box Patented BobCat - Angled Style (Type 29) Used on right angle air die grinders for maximum aggression. Small size allows access to confined areas. Grit Max. Zirconium Dia. RPM /W50922 2" 36 30,000 /W50923 40 /W50924 60 /W50925 80 /W50926 120 /W50902 3" 36 20,000 /W50903 40 /W50904 60 /W50905 80 /W50906 120 Standard Package is 10/Box Patented /W07766 For mounting 2" and 3" BobCats on tools with 1/4" collets Standard Package is 1 pc. BobCat Drive Mandrel 236 Visit us on the WEB @ EBNinc.com

Flap Wheels Small Diameter Flap Wheels (Cont.) Small Diameter 1/4-20 Mat l Dia. Width Grit 1/4 Threaded 2 1 60 /S74050 /S71160 2 1 80 /S74051 /S71161 2 1 120 /S74052 /S71162 2-1/2 1 60 /S74060 /S71170 3A 2-1/2 1 80 /S74061 /S71171 2-1/2 1 120 /S74062 /S71172 3 1 60 /S74070 /S71180 3 1 80 /S74071 /S71181 3 1 120 /S74072 /S71182 2A Premium aluminum oxide grain General purpose Excellent for cleaning, deburring, polishing, blending Metal: Ferrous and/or non-ferrous metals (iron, steel, aluminum, copper, etc.) Wood: Wood, plastic, fiberglass, etc. 3A Premium aluminum oxide grain with cooling agents Excellent for reducing heat build-up on heat sensitive materials Excellent for cleaning, deburring, polishing, blending Stainless: Stainless steel, high tensile steel, titanium Metal: Ferrous and/or non-ferrous metals Straight 1/4" and threaded 1/4-20 mandrels available 1/4-20 Mat l Dia. Width Grit 1/4 Stem Threaded 1 1 60 /S70010 /S71010 1 1 80 /S70011 /S71011 1 1 120 /S70012 /S71012 1 1 180 /S70013 /S71013 1 1 240 /S70014 /S71014 1-1/2 1 60 /S70040 /S71030 1-1/2 1 80 /S70041 /S71031 1-1/2 1 120 /S70042 /S71032 1-1/2 1 180 /S70043 /S71033 1-1/2 1 240 /S70044 /S71034 2 40 /S70049-2A 2 1 60 /S70050 /S71040 2 1 80 /S70051 /S71041 2 1 120 /S70052 /S71042 2 1 180 /S70053 /S71043 2 1 240 /S70054 /S71044 2-1/2 40 /S70069-2-1/2 1 60 /S70070 /S71055 2-1/2 1 80 /S70071 /S71056 2-1/2 1 120 /S70072 /S71057 2-1/2 1 180 /S70073 /S71058 2-1/2 1 240 /S70074 /S71059 3 40 /S70099-3 1 60 /S70100 /S71080 3 1 80 /S70101 /S71081 3 1 120 /S70102 /S71082 3 1 180 /S70103 /S71083 3 1 240 /S70104 /S71084 Packaging 10/box Die Grinder Packaging 10/box Other Styles & s Available Including 6" & 8" Belts Also Available Also Available: 9 x 11 Sanding Sheets Sait Screen Dry Wall Sheets Plumbers Rolls Cartridge Rolls - (Straight/Taper) Cross Pads Square Pads Floor Sanding (Sheets & Discs) Spiral Bands Arbors available on Page 241 Visit us on the WEB @ EBNinc.com 237

Shop Rolls Handy & Industrial Industrial Rolls For Metal & Wood Aluminum oxide grain Premium quality EA-F material for very high flexibility High tensile strength, extra durable backing Long life Primarily for machine applications Industrial Rolls Grit 40 /S80415 50 /S80515 60 /S80615 80 /S80815 100 /S81015 1" 120 /S81215 Width 150 /S81515 180 /S81815 220 /S82215 240 /S82415 320 /S83215 400 /S83415 40 /S80416 50 /S80516 60 /S80616 80 /S80816 100 /S81016 1-1/2" 120 /S81216 150 /S81516 180 /S81816 220 /S82216 240 /S82416 320 /S83216 400 /S83416 40 /S80430 50 /S80530 60 /S80630 80 /S80830 100 /S81030 2" 120 /S81230 150 /S81530 180 /S81830 220 /S82230 240 /S82430 320 /S83230 400 /S83430 Rolls Alumium oxide grain Medium tensile strength Used for metals and wood Grit 40 /S80405 50 /S80505 60 /S80605 80 /S80805 100 /S81005 1" 120 /S81205 150 /S81505 180 /S81805 220 /S82205 240 /S82405 320 /S83205 400 /S83405 40 /S80406 50 /S80506 60 /S80606 80 /S80806 100 /S81006 1-1/2" 120 /S81206 150 /S81506 180 /S81806 220 /S82206 240 /S82406 320 /S83206 400 /S83406 40 /S80420 50 /S80520 60 /S80620 80 /S80820 100 /S81020 2" 120 /S81220 150 /S81520 180 /S81820 220 /S82220 240 /S82420 320 /S83220 400 /S83420 Packaging 50 yd. length, 1/box Handy Rolls Rolls Most of the important things in the world have been accomplished by people who have kept on trying when there seemed to be no hope at all. Dale Carnigie 238 Visit us on the WEB @ EBNinc.com

Belts United Abrasives offers an extensive line of non-woven abrasives for use in a variety of applications. Non-woven abrasives are primarily used in the metalworking industry for changing the surface of material without removing or damaging the base materials. Essentially, non-woven abrasives are used as a final finishing step. Hand Pads Non-Woven Hand Sander Bench Stand File Sander Portable Back Stand Non-Woven Pads Coarse Medium Very Fine Per Brown Maroon Blue Box 1/2 X 18 /S77510 /S77511 /S77512 10 1/2 X 24 /S77515 /S77516 /S77517 10 3/4 X 18 /S77520 /S77521 /S77522 10 3/4 X 20-1/2 /S77575 /S77576 /S77577 10 3-1/2 X 15-1/2 /S77500 /S77501 /S77502 10 1 X 42 /S77525 /S77526-10 2 X 48 /S77530 /S77531-10 2 X 60 /S77535 /S77536-10 2 X 132 /S77550 /S77551-5 3 X 21 /S77570 /S77571 /S77572 10 3 X 24 /S77560 /S77561 /S77562 10 3 X 132 /S77555 /S77556-5 4 X 24 /S77565 /S77566 /S77567 10 6 X 48 /S77540 /S77541-5 Discs Non-Woven Sand-Light Handle /S95080 Handle available for uniform finishing Non-woven synthetic fiber impregnated with abrasive grain for surface conditioning without damage to or removal of base material. Resists loading and heat build-up Wet/dry construction for use in a wide range of applications Available in a variety of grades from heavy duty to polishing applications Reusable and long lasting design for economical use Box label UPC bar coded for easy identification and inventory maintenance Pads Part Per Grade Color No. Box Heavy Duty Brown /S77440 20 General Purpose Maroon /S77447 20 6 x 9 Stainless Black /S77446 20 Stripper Green /S77496 20 Ultra Fine Gray /S77448 20 Light Duty White /S77486 20 Portable Grinder Sait-Lok-R Nylon screw type threaded hub for easy mounting to backing pad Pads Part Per Grade Color No. Box Coarse Brown /S77300 50 1-1/2" Medium Maroon /S77302 50 Very Fine Blue /S77303 50 Coarse Brown /S77306 50 2" Medium Maroon /S77308 50 Very Fine Blue /S77309 50 Coarse Brown /S77312 25 3" Medium Maroon /S77314 25 Very Fine Blue /S77315 25 Coarse Brown /S77318 25 4" Medium Maroon /S77320 25 Very Fine Blue /S77321 25 Visit us on the WEB @ EBNinc.com 239

Discs (Cont.) Accessories Backing Pads for Resin Fiber Discs Spiralcool backing pads exclusive rubber, fabric, and fiber board construction provide extra strength and reliability Spiral ribs provide contact points and form channels for air flow extending disc life 30% to 50% Each pad is supplied with a nut as indicated For the 10mm arbor pad specify nut: #95044 for 1.5 nut or #95043 for 1.25 nut Disc Sander Non-Woven Hook & Loop Portable Grinder Note: Pad nut must be purchased separately. This backing pad is not to be used with SAIT-LOK quick change fiber discs Grade Available Max Arbor Soft Med Hard RPM 4 5/8-11 Thread - /S95010-12,000 *4-1/2 5/8 - /S95011-11,000 4-1/2 1/2 - /S95012-11,000 4-1/2 10mm - /S95013-11,000 4-1/2 14mm - /S95015-11,000 5 5/8 - /S95016-10,000 7 5/8-11 Thread /S95017 - - 7,000 7 5/8-11 Thread - /S95018 /S95019 8,500 9 5/8-11 Thread /S95020 /S95021 /S95022 6,500 * #95011 also for use on SAITBLEND discs A variety of 1/4" shank, 5/16-24 and 5/8-11 backing pads are available for use on drills, dual action/random orbital sanders, and right angle grinders/sanders Pads Part. Per Grade Color No. Box Coarse Brown /S77116 10 4" Medium Maroon /S77117 10 Very Fine Blue /S77115 10 Coarse Brown /S77118 10 4-1/2" Medium Maroon /S77120 10 Very Fine Blue /S77122 10 Coarse Brown /S77124 10 5" Medium Maroon /S77126 10 Very Fine Blue /S77128 10 Coarse Brown /S77130 10 6" Medium Maroon /S77132 10 Very Fine Blue /S77134 10 Coarse Brown /S77136 10 7" Medium Maroon /S77138 10 Very Fine Blue /S77140 10 Coarse Brown /S77142 10 8" Medium Maroon /S77144 10 Very Fine Blue /S77146 10 See Pages 248-267 for Milwaukee & Metabo Electric Tools SAIT-LOK Backing Pads for Resin Fiber Discs Smooth face backing pad for SAIT-LOK fiber Disc Minimizes change-over downtime No additional mounting hardware required Each pad is supplied with nut and washers Note: SAIT-LOK disc must be used with threaded backing pad *4-1/2X5/8-11 /S95023 4-1/2X5/8-11 /S95025 *5X5/8-11 /S95024 5X5/8-11 /S95026 7X5/8-11 /S95027 9X5/8-11 /S95028 * Low profile for short spindles Spanner Wrench Adjustable wrench for tightening and loosening center nuts Fits all center nuts Spanner Wrench /S95008 Center Nuts For attaching fiber discs to backing pad and tool Use small* for 4", 4-1/2", 5" diameter Use large* for 7", 9" diameter pads 5/8-11 Small* /S95040 5/8-11 Large* /S95041 1/2-13 /S95042 M10X1.25 /S95043 M10X1.5 /S95044 M14X2.0 /S95045 Type 1 Cut-Off Adapters For use with Type 1 Thin High Speed Cut-Off wheels only 1/4 X 1/4 /S95002 1/4 X 3/8 /S95003 1/4 X 1/2 /S95004 240 Visit us on the WEB @ EBNinc.com

Type 27 Reusable Adaptor Kit For use with Type 27 wheels on 7" and 9" 5/8-11 spindle grinders Alternative to a throwaway hub Reusable Adaptor Kit /S95000 Type 1 & Type 27 Reusable 5/8-11 Adaptor Reusable 5/8-11 adaptor for use on Type 1 and Type 27 reinforced wheels with a 7/8 arbor, a max. diameter of 5" and wheel thickness of.045 to 1/8" 5/8-11 Reusable Adaptor /S95055 Type 1 Cut-Off Wheel Reduced Bushings For use with Type 1 Cut-Off wheels Reduces wheel arbor size Skin packaged in quantities of 10 per package 1-5/8 /S95030 7/8-5/8 /S95034 1-20mm /S95031 Dia. 5/8 /S95035 1-7/8 /S95032 Dia. 1/2 /S95036 1-3/4 /S95033 1/2-3/8 /S95037 Challenger II Backing Pad For use with Challenger II flexible grinding/blending wheels Set includes 5/8-11 nut and pad Pad for 4-1/2 & 5" Challenger II /S95245 Pad for 7" Challenger II /S95247 Sand-Light Surface Conditioning Backing Pads For use with Hook & Loop style Sand-Light Discs 1/4" shank pads Threaded pads for dual action random orbital sanders Threaded pads for right angle grinders/sanders 4 x 1/4 /S95154 5 x 1/4 /S95153 4 x 5/16-24 /S95157 5 x 5/16-24 /S95155 6 x 5/16-24 /S95156 4-1/2 x 5/8-11 /S95159 5 x 5/8-11 /S95160 6 X 5/8-11 /S95161 7 X 5/8-11 /S95162 8 X 5/8-11 /S95163 Sand-Light Handle For manual use with Sand-Light 6 x 9 hand pads For more uniform finish when hand sanding Sand-Light Handle /S95080 SAIT-LOK Backing Pads for Laminated & Surface Conditioning Discs For use with SAIT-LOK laminated and surface conditioning discs Disc twists into metal threaded center of backing pad for fast and easy disc changes Now available in hard density for aggressive cutting action 1/4" shank 1" Medium /S95165 1-1/2" Hard /S95266 1-1/2" Medium /S95166 2" Hard /S95267 2" Medium /S95167 3" Hard /S95268 3" Medium /S95168 SAIT-LOK-R Backing Pads for Laminated, Surface Conditioning, & Cotton Fiber Discs For use with SAIT-LOK-R laminated surface conditioning discs, Cotton fiber discs Nylon threaded hub of disc twists into backing pad for secure fit Now available in hard density for aggressive cutting action Minimizes change-over time 1/4" shank 1-1/2" Medium /S95171 1-1/2" Hard /S95271 2" Medium /S95172 2" Hard /S95272 3" Medium /S95173 3" Hard /S95273 4" Medium /S95280 Saitlam Flap Disc Backing Pad & Nut 6-1/2" Backing Pad Assembly Must be used with 6-1/2" Saitlam Includes backing pad, nut (5/8-11), and washer 6-1/2" Saitlam Backing Pad /S95070 Saitlam Nuts Uses Nut 4-1/2" Saitlam 5/8-11 /S95071 4-1/2" Saitlam M14 x 2.0 /S95072 4" Saitlam M10 x 1.25 /S95074 Abrasive Cleaning Stick For removing loaded material from sanding belts Increases abrasive life 100% natural rubber; environmentally safe Lasts twice as long as conventional (crepe) belt cleaners and will not cause gummy residue : 1-5/8" x 1-5/8" x 8" Abrasive Cleaning Stick /S95083 1/4" Shank Threaded Adaptor for Flap Wheels For use on United Abrasives 1/4-20 threaded flap wheels Facilitates a quick change, thus less downtime 1/4" Threaded Adaptor /S95050 1/4" Shank Adaptor Kit for Flap Wheels For converting 1' or 5/8" arbors to a 1/4" shank 1/4" Shank adaptor kit Adaptor Kit /S95009 Visit us on the WEB @ EBNinc.com 241