Test Report No.: SHTY120400004835 Date: May 11, 2012 Page 1 of 7 HOHNER INC 1000 TECHNOLOGY PARK DRIVE GLEN ALLEN VA 23059 U.S.A. The following samples were submitted and identified by/on behalf of the client as: Sample Description : 10 HOLE BLUE COVERED HARMONICA 1510 (FUEGO AZUL); 10 HOLES TRANSPARENT HARMONICA Detail of Sample : HARMONICAS SET INCLUDES 1 METAL HARMONICAS, COMES WITH INSTRUCTION, PLASTIC BOX PACKED, 6 COLOR ASSORTED PLASTIC HARMONICAS, POLYBAG PACKED Sample Quantity : 14 PCS Buyer : HOHNER INC Country of Origin : CHINA Country of Destination : U.S.A Labeled Age Grading : RECOMMENDED FOR AGES 6+ Requested Age Grading : OVER 3 YEARS Age Group Applied in Testing : 3+ YEARS Sample Receiving Date : APR 13, 2012 Testing Period : APR 13, 2012 TO MAY 11, 2012 TESTING REQUESTED : For compliance with the ASTM F963-11 Standard Consumer Safety Specification on Toy Safety RESULTS : CONCLUSION : Details please refer to next page. The submitted samples comply with the requested test requirements. Signed for and on behalf of SGS-CSTC Ltd. Wallace Lui Senior Technical Manager, Asia
Test Report No.: SHTY120400004835 Date: May 11, 2012 Page 2 of 7 Result Summary: ASTM F963 11 AS SPECIFIED IN ASTM F963-11 STANDARD CONSUMER SAFETY SPECIFICATION ON TOYS SAFETY Clause Relevant to Sample. Clause Description Result 4 Safety Requirements 4.1 Material Quality (Visual Examination) Pass 4.2 Flammability Test Pass (See Note 1) 4.3 Toxicology 4.3.5 Heavy Elements 4.3.5.1 Heavy Elements in Paint/Similar Surface Coating Materials Pass (See Note 2 & 4) 4.3.5.2 Heavy Metal in Substrate Materials Pass (See Note 3 & 4) 4.7 Accessible Edges Pass 4.9 Accessible Points Pass 4.11 Nails and Fasteners Pass 5 Safety Labeling Requirements 5.2 Age Grading Labeling Pass 5.16 Promotional Materials Pass 6 Instructional Literature 6.1 Definition and Description Pass 7 Producer s Markings 7.1 Producer s Markings Pass 8 Test Methods 8.5 Normal Use Testing Pass 8.7 Impact Test Pass 8.8 Torque Test Pass 8.9 Tension Test Pass Note 1 : Flammability Test (Clause 4.2) Sample Burning Rate (inch/sec) Harmonicas 0.02 Requirement : A toy / component is considered a flammable solid if it ignites and burns with a selfsustaining flame at a rate greater than 0.10 in/sec along its major axis.
Test Report No.: SHTY120400004835 Date: May 11, 2012 Page 3 of 7 Note 2: American Society for Testing and Materials -ASTM F 963-11 - total Lead in paint and similar surface-coating materials Test Method : With reference to CPSC Test Method: CPSC-CH-E1003-09.1, analysis was performed by ICP-OES. Test Item(s) Limit Unit MDL 023 Total Lead (Pb) 90 mg/kg 20 ND Note 3: American Society for Testing and Materials -ASTM F 963-11 - total Lead in Substrate Materials Test Method : With reference to CPSC Test Method: CPSC-CH-E1002-08.1. Analysis was performed by ICP-OES. Test Item(s) Limit Unit MDL 003 004 005 Total Lead (Pb) 100 mg/kg 20 ND ND 44 Test Item(s) Limit Unit MDL 007 008 009 Total Lead (Pb) 100 mg/kg 20 ND ND ND Test Item(s) Limit Unit MDL 010 011 012 Total Lead (Pb) 100 mg/kg 20 ND ND ND Test Item(s) Limit Unit MDL 013 014 015 Total Lead (Pb) 100 mg/kg 20 ND ND ND Test Item(s) Limit Unit MDL 016 022 026 Total Lead (Pb) 100 mg/kg 20 ND ND ND
Test Report No.: SHTY120400004835 Date: May 11, 2012 Page 4 of 7 Note 4 : American Society for Testing and Materials ASTM F 963-11 soluble heavy metal in Substrate Materials/paint and similar surface-coating materials Test Method : Soluble Heavy Metal contents (Clause 4.3.5) - Sample was extracted by dilute hydrochloric acid in accordance with ASTM F 963-11(Clause 8.3), analysis was performed by ICP-OES. Test Item(s) Limit Unit MDL 003 004 005 Soluble Lead (Pb) 90 mg/kg 5 ND ND ND Soluble Antimony (Sb) 60 mg/kg 5 ND ND ND Soluble Arsenic (As) 25 mg/kg 2.5 ND ND ND Soluble Barium (Ba) 1000 mg/kg 10 ND ND ND Soluble Cadmium (Cd) 75 mg/kg 5 ND ND ND Soluble Chromium (Cr) 60 mg/kg 5 ND ND ND Soluble Mercury (Hg) 60 mg/kg 5 ND ND ND Soluble Selenium (Se) 500 mg/kg 10 ND ND ND Test Item(s) Limit Unit MDL 007 008 009 Soluble Lead (Pb) 90 mg/kg 5 ND ND ND Soluble Antimony (Sb) 60 mg/kg 5 ND ND ND Soluble Arsenic (As) 25 mg/kg 2.5 ND ND ND Soluble Barium (Ba) 1000 mg/kg 10 ND ND ND Soluble Cadmium (Cd) 75 mg/kg 5 ND ND ND Soluble Chromium (Cr) 60 mg/kg 5 ND ND ND Soluble Mercury (Hg) 60 mg/kg 5 ND ND ND Soluble Selenium (Se) 500 mg/kg 10 ND ND ND Test Item(s) Limit Unit MDL 010 011 012 Soluble Lead (Pb) 90 mg/kg 5 ND ND ND Soluble Antimony (Sb) 60 mg/kg 5 ND ND ND Soluble Arsenic (As) 25 mg/kg 2.5 ND ND ND Soluble Barium (Ba) 1000 mg/kg 10 ND ND ND Soluble Cadmium (Cd) 75 mg/kg 5 ND ND ND Soluble Chromium (Cr) 60 mg/kg 5 ND ND ND Soluble Mercury (Hg) 60 mg/kg 5 ND ND ND Soluble Selenium (Se) 500 mg/kg 10 ND ND ND
Test Report No.: SHTY120400004835 Date: May 11, 2012 Page 5 of 7 Test Item(s) Limit Unit MDL 013 014 015 Soluble Lead (Pb) 90 mg/kg 5 ND ND ND Soluble Antimony (Sb) 60 mg/kg 5 ND ND ND Soluble Arsenic (As) 25 mg/kg 2.5 ND ND ND Soluble Barium (Ba) 1000 mg/kg 10 ND ND ND Soluble Cadmium (Cd) 75 mg/kg 5 ND ND ND Soluble Chromium (Cr) 60 mg/kg 5 ND ND ND Soluble Mercury (Hg) 60 mg/kg 5 ND ND ND Soluble Selenium (Se) 500 mg/kg 10 ND ND ND Test Item(s) Limit Unit MDL 016 022 023 Soluble Lead (Pb) 90 mg/kg 5 ND ND - Soluble Antimony (Sb) 60 mg/kg 5 ND ND - Soluble Arsenic (As) 25 mg/kg 2.5 ND ND - Soluble Barium (Ba) 1000 mg/kg 10 ND ND - Soluble Cadmium (Cd) 75 mg/kg 5 ND ND - Soluble Chromium (Cr) 60 mg/kg 5 ND ND - Soluble Mercury (Hg) 60 mg/kg 5 ND ND - Soluble Selenium (Se) 500 mg/kg 10 ND ND - Test Item(s) Limit Unit MDL 026 Soluble Lead (Pb) 90 mg/kg 5 ND Soluble Antimony (Sb) 60 mg/kg 5 ND Soluble Arsenic (As) 25 mg/kg 2.5 ND Soluble Barium (Ba) 1000 mg/kg 10 ND Soluble Cadmium (Cd) 75 mg/kg 5 ND Soluble Chromium (Cr) 60 mg/kg 5 ND Soluble Mercury (Hg) 60 mg/kg 5 ND Soluble Selenium (Se) 500 mg/kg 10 ND Notes : (1) Results shown are of the adjusted analytical results (2) Mass of trace amount of sample 005 is 70.7mg, sample 008 is 78.4mg, sample 009 is 99.4mg, sample 011 is 90.4mg, sample 012 is 98.0mg,sample 014 is 99.7mg. (3) As received, the test portion of samples 023 from one whole sample are less than 10mg, therefore such components were not tested for certain migration elements, as specified in ASTM F963-11 Clause 8.3.3.6 (2) Selection of Test Portions
Test Report No.: SHTY120400004835 Date: May 11, 2012 Page 6 of 7 Test Part Description : Specimen No. SGS Sample ID Description 1 SHA12-073490.003 Black plastic(on harmonica) 2 SHA12-073490.004 Translucent purple plastic(harmonica) 3 SHA12-073490.005 Transparent dark purple plastic(on harmonica) 4 SHA12-073490.007 Translucent yellow plastic(harmonica) 5 SHA12-073490.008 Transparent yellow plastic(on harmonica) 6 SHA12-073490.009 Translucent red plastic(harmonica) 7 SHA12-073490.010 Transparent red plastic(on harmonica) 8 SHA12-073490.011 Translucent orange plastic(harmonica) 9 SHA12-073490.012 Transparent orange plastic(on harmonica) 10 SHA12-073490.013 Translucent blue plastic(harmonica) 11 SHA12-073490.014 Transparent blue plastic(on harmonica) 12 SHA12-073490.015 Translucent green plastic(harmonica) 13 SHA12-073490.016 Transparent green plastic(on harmonica) 14 SHA12-073490.022 Transparent plastic film(pack) 15 SHA12-073490.023 Black coating(on pack) 16 SHA12-073490.026 Dark grey plastic(case) Remarks : (1) 1 mg/kg = 1 ppm = 0.0001% (2) MDL = Method Detection Limit (3) ND = Not Detected ( < MDL ) (4) "-" = Not Regulated N.B. : - Only applicable clauses were shown.
Test Report No.: SHTY120400004835 Date: May 11, 2012 Page 7 of 7 Sample Photo: SGS authenticate the photo on original report only *** End of Report ***
Test Report. No. SHATY1207353401 Date: 11 May 2012. Page 1 of 8. HOHNER INC.. 1000 TECHNOLOGY PARK DRIVE GLEN ALLEN VA 23059 U.S.A.. The following sample(s) was/were submitted and identified on behalf of the clients as : 10 HOLE BLUE COVERED HARMONICA 1510 (FUEGO AZUL); 10 HOLES TRANSPARENT HARMONICA. SGS Job No. : Buyer :. Labeled Age Grading :. Country of Origin :. Country of Destination :. SHTY120500006492 - SH. HOHNER INC. OVER 3 YEARS. China. United States. Date of Sample Received :. 16 Apr 2012. Testing Period :. 16 Apr 2012-28 Apr 2012. Test Requested :. Test Method :. Test Results :. As specified by client, selected parts of the submitted sample(s) for compliance with Public Law 110-314 (Consumer Product Safety Improvement Act of 2008, CPSIA):. - CPSIA section 101(f) - Lead in paint/similar surface coating material. - CPSIA section 101(a)(2) - Lead in accessible substrate materials (including Children s Metal Jewelry). - CPSIA section 108 - Phthalates. Please refer to next page(s).. Please refer to next page(s).. Result Summary :. Test Parameter. CPSIA section 101(f) - Lead in paint/similar surface coating material. CPSIA section 101(a)(2) - Lead in accessible substrate materials (including Children s Metal Jewelry). CPSIA section 108 - Phthalates. Conclusion. PASS PASS PASS
Test Report. No. SHATY1207353401 Date: 11 May 2012. Page 2 of 8. Signed for and on behalf of SGS-CSTC Ltd.. Liu Haipeng, Helen. Approved Signatory...
Test Report. No. SHATY1207353401 Date: 11 May 2012. Page 3 of 8. Test Results :. Test Part Description :. Specimen No.. SGS Sample ID. Description. 1. SHA12-073534.001 Black plastic(on harmonica). 2. SHA12-073534.002 Translucent purple plastic(harmonica). 3. SHA12-073534.003 Transparent dark purple plastic(on harmonica). 4. SHA12-073534.004 Translucent yellow plastic(harmonica). 5. SHA12-073534.005 Transparent yellow plastic(on harmonica). 6. SHA12-073534.006 Translucent red plastic(harmonica). 7. SHA12-073534.007 Transparent red plastic(on harmonica). 8. SHA12-073534.008 Translucent orange plastic(harmonica). 9. SHA12-073534.009 Transparent orange plastic(on harmonica). 10. SHA12-073534.010 Translucent blue plastic(harmonica). 11. SHA12-073534.011 Transparent blue plastic(on harmonica). 12. SHA12-073534.012 Translucent green plastic(harmonica). 13. SHA12-073534.013 Transparent green plastic(on harmonica). 14. SHA12-073534.015 Transparent plastic film(pack). 15. SHA12-073534.016 Black coating(on pack). 16. SHA12-073534.019 Dark grey plastic(case). 17. SHA12-073534.025 Blue/golden metal(harmonica). 18. SHA12-073534.027 Golden metal(screw). 19. SHA12-073534.028 Copper metal(under translucent purple plastic). 20. SHA12-073534.033 Golden metal sheet. Remarks : (1) % = percentage by weight (2) 1% = 10000ppm ( mg/kg ) (3) MDL = Method Detection Limit (4) ND = Not Detected ( < MDL ) CPSIA section 101(f) - Lead in paint/similar surface coating material. Test Method :. CPSC Test Method: CPSC-CH-E1003-09.1' Standard Operation Procedure for Determining Lead (Pb) in Paint and Other Similar Surface Coatings'.
Test Report. No. SHATY1207353401 Date: 11 May 2012. Page 4 of 8. Permissible Unit. MDL 016. Lead (Pb). 0.009 %. 0.002 ND Comment. PASS CPSIA section 101(a)(2) - Lead in accessible substrate materials (including Children s Metal Jewelry). Test Method :. CPSC Test Method: CPSC-CH-E1001-08.1 'Standard Operating Procedure for Determining Total Lead (Pb) in Children's Metal Products (Including Children's Metal Jewelry)'.. Permissible Unit. MDL 025. 027. 028. Limit**. Lead (Pb). 0.01 %. 0.002 ND ND 0.0024 Permissible Unit. MDL 033. Limit**. Lead (Pb). 0.01 %. 0.002 0.0053 Comment. PASS ** The requirements for lead in substrate in children s products is summarized below : Scope Lead in accessible substrate Requirement 0.03 % 0.01% Date of manufacture Before 14 Aug 2011 After 14 Aug 2011 Notes :. (1) ** Limit applies to a children s product manufactured after 14 August 2011 (Public Law 112-28 (HR 2715, 112th Congress) amending CPSIA). Test Method :. CPSC Test Method: CPSC-CH-E1002-08.1 'Standard Operation Procedure for Determining Total Lead (Pb) in Non-Metal Children Product'.
Test Report. No. SHATY1207353401 Date: 11 May 2012. Page 5 of 8. Permissible Unit. MDL 001. 002. 003. Limit**. Lead (Pb). 0.01 %. 0.002 ND ND 0.0044 Permissible Unit. MDL 004. 005. 006. Limit**. Lead (Pb). 0.01 %. 0.002 ND ND ND Permissible Unit. MDL 007. 008. 009. Limit**. Lead (Pb). 0.01 %. 0.002 ND ND ND Permissible Unit. MDL 010. 011. 012. Limit**. Lead (Pb). 0.01 %. 0.002 ND ND ND Permissible Unit. MDL 013. 015. 019. Limit**. Lead (Pb). 0.01 %. 0.002 ND ND ND ** The requirements for lead in substrate in children s products is summarized below : Scope Lead in accessible substrate Requirement 0.03 % 0.01% Date of manufacture Before 14 Aug 2011 After 14 Aug 2011 Notes :. (1) ** Limit applies to a children s product manufactured after 14 August 2011 (Public Law 112-28 (HR 2715, 112th Congress) amending CPSIA). CPSIA section 108 - Phthalates. Test Method :. With reference to CPSC-CH-C1001-09.3, analysis was performed by GC-MS. Concentration of phthalates in components of toy product
Test Report. No. SHATY1207353401 Date: 11 May 2012. Page 6 of 8. Permissible Unit. MDL 001. 002. 003. Dibutyl Phthalate (DBP). 0.1 %. 0.003 ND ND ND Benzylbutyl Phthalate (BBP). 0.1 %. 0.003 ND ND ND Bis-(2-ethylhexyl) Phthalate (DEHP). 0.1 %. 0.003 0.004 ND ND Permissible Unit. MDL 004. 005. 006. Dibutyl Phthalate (DBP). 0.1 %. 0.003 ND ND ND Benzylbutyl Phthalate (BBP). 0.1 %. 0.003 ND ND ND Bis-(2-ethylhexyl) Phthalate (DEHP). 0.1 %. 0.003 ND ND ND Permissible Unit. MDL 007. 008. 009. Dibutyl Phthalate (DBP). 0.1 %. 0.003 ND ND ND Benzylbutyl Phthalate (BBP). 0.1 %. 0.003 ND ND ND Bis-(2-ethylhexyl) Phthalate (DEHP). 0.1 %. 0.003 ND ND ND Permissible Unit. MDL 010. 011. 012. Dibutyl Phthalate (DBP). 0.1 %. 0.003 ND ND ND Benzylbutyl Phthalate (BBP). 0.1 %. 0.003 ND ND ND Bis-(2-ethylhexyl) Phthalate (DEHP). 0.1 %. 0.003 ND ND ND Permissible Unit. MDL 013. 015. 016. Dibutyl Phthalate (DBP). 0.1 %. 0.003 ND ND ND Benzylbutyl Phthalate (BBP). 0.1 %. 0.003 ND ND ND Bis-(2-ethylhexyl) Phthalate (DEHP). 0.1 %. 0.003 ND 0.022 ND Permissible Unit. MDL 019. Dibutyl Phthalate (DBP). 0.1 %. 0.003 ND Benzylbutyl Phthalate (BBP). 0.1 %. 0.003 ND Bis-(2-ethylhexyl) Phthalate (DEHP). 0.1 %. 0.003 ND Comment. PASS
Test Report. No. SHATY1207353401 Date: 11 May 2012. Page 7 of 8. Concentration of phthalates in components of toy that can be placed in the mouth or childcare article Permissible Unit. MDL 001. 002. 003. Diisononyl Phthalate (DINP). 0.1. %. 0.01 ND ND ND Di-n-octyl Phthalate (DNOP). 0.1 %. 0.003 ND ND ND Diisodecyl Phthalate (DIDP). 0.1. %. 0.01 ND ND ND Permissible Unit. MDL 004. 005. 006. Diisononyl Phthalate (DINP). 0.1. %. 0.01 ND ND ND Di-n-octyl Phthalate (DNOP). 0.1 %. 0.003 ND ND ND Diisodecyl Phthalate (DIDP). 0.1. %. 0.01 ND ND ND Permissible Unit. MDL 007. 008. 009. Diisononyl Phthalate (DINP). 0.1. %. 0.01 ND ND ND Di-n-octyl Phthalate (DNOP). 0.1 %. 0.003 ND ND ND Diisodecyl Phthalate (DIDP). 0.1. %. 0.01 ND ND ND Permissible Unit. MDL 010. 011. 012. Diisononyl Phthalate (DINP). 0.1. %. 0.01 ND ND ND Di-n-octyl Phthalate (DNOP). 0.1 %. 0.003 ND ND ND Diisodecyl Phthalate (DIDP). 0.1. %. 0.01 ND ND ND Permissible Unit. MDL 013. 015. 016. Diisononyl Phthalate (DINP). 0.1. %. 0.01 ND ND ND Di-n-octyl Phthalate (DNOP). 0.1 %. 0.003 ND ND ND Diisodecyl Phthalate (DIDP). 0.1. %. 0.01 ND ND ND
Test Report. No. SHATY1207353401 Date: 11 May 2012. Page 8 of 8. Permissible Unit. MDL 019. Diisononyl Phthalate (DINP). 0.1. %. 0.01 ND Di-n-octyl Phthalate (DNOP). 0.1 %. 0.003 ND Diisodecyl Phthalate (DIDP). 0.1. %. 0.01 ND Comment. PASS Remark: (1) Results of samples 001~013, 015~016, 019, 025 are taken from report SHATY1205402202-001~013, 015~016, 019, 025, Date: 2012/04/28. (2) Results of sample 033 are taken from report SHATY1206475001-003, Date: 2012/04/28.. Sample photo:. SHATY1207353401. SGS authenticate the photo on original report only. *** End of Report ***.