Full Design Document List

Similar documents
Generic New Construction Cost Estimating Libraries

SECTION B PLAN SUBMITTAL

REBUILDING VESSELS LESS THAN 90 METERS (295 FEET) IN LENGTH AND BARGES OF ANY LENGTH

Recreational Craft Directive Compliance

Rules for the Classification and the Certification of Yachts

Product Categories SMM 2018

Rules for the Classification of. Dredgers

CV3200 PLUS DIANA - BETTER BY DESIGN

Outline Specification. of a. for. Bunkering and Short Sea

Survey performance requirements. Periodic surveys of hull, decks and superstructure of fibre-reinforced plastic (FRP) ships

LIVING QUARTERS module building principles General Features

Part 1. Potentially hazardous materials in the ship's structure and equipment. 1A Asbestos & Asbestos Containing Materials (ACMs)

RULES FOR CLASSIFICATION. High speed and light craft. Part 5 Ship types Chapter 4 Crew boats. Edition July 2017 DNV GL AS

Dr. Fridtjof Nansen Building progress

Guideline No.: L -06(201510) L-06 LIFEBOATS. Issued date: October 20,2015. China Classification Society

Name of ship. MNZ number. Nationality. Owners. Surveyor. Classification Society. Date of build/conversion. Freeboard length.

List of Paris MoU deficiency codes i

CV 2000 PLUS ISABELLE - BETTER BY DESIGN

List of Paris MoU deficiency codes i

FMB15678 Steel Deck Cargo Barge

Rules for the Classification of. Steel Barges

THE SAFETY OF LIFEATSEA, 1974

Structural Design of 38m Special Purpose Vessel in Aluminium Alloy By Murat Tosun

Reference table of the clarification of the applicability of SOLAS regulations

Australian Government. Australian Maritime Safety Authority. Port State Control AMSA 36 (4/14)

MEGA YACHTS DESIGN BECOMES REALITY

DC STATIONS. DC Stations, Section 11, Investigating Damage Descriptions Tip 002

SEMI-SUBMERSIBLE HEAVY LIFT VESSELS

SEMI-SUBMERSIBLE HEAVY LIFT VESSELS

MOBILE OFFSHORE UNITS JULY 2008

Part 3 Hull Chapter 9 Opening and closing appliances

SMG. Smart Maritime Group. Ship Repair & Conversion

COMMON STRUCTURAL RULES FOR BULK CARRIERS AND OIL TANKERS RULE CHANGE PROPOSAL 1 This proposal contains amendments within the following Parts and chap

Part 1 General regulations Chapter 3 Documentation and certification requirements, general

B63J AUXILIARIES ON VESSELS. Definition statement. Relationships with other classification places. References. Limiting references

KU West Campus LEEP II High Bay Facility Project # , A (c)

Introduction to the Classification Technical Rules

CERTIFICATES OF COMPETENCY IN THE MERCHANT NAVY - MARINE ENGINEER OFFICER

Green Marine. Environmental Program. Performance Indicators for Ship owners

A/E Design Deliverable Checklist

Combifloat C-1500 SELF ELEVATING PLATFORM FOR PDVSA

Higher National Unit specification: general information. Marine Engineering: Advanced Ship Construction and Survey

REQUEST FOR PROPOSAL

Lifting Appliances of Ships and Offshore Installations

Operational Equipment Tests. NT NOTICE TO SHIPPING No. N

2016 CDM Smith All Rights Reserved July 2016 SECTION MULTIPLE CONTRACT SUMMARY

Part 3 Hull Chapter 9 Opening and closing appliances

ADDENDUM 2 - JULY 14, 2015

Maritime Safety Committee s 84 th Session

CERTIFICATES OF COMPETENCY IN THE MERCHANT NAVY - MARINE ENGINEER OFFICER

Part 10 Hull Structure and Equipment of Small Steel Ships

MSC Guidelines for Review of Ventilation System Plans

CASTORO SEI OFFSHORE

Aryatech Marine & Offshore Services Pvt. Ltd. Aryatech Engineering Consultants FZE

CARRIAGE OF INTEGRAL REFRIGERATED CONTAINERS ON BOARD SHIPS

Drettmann Motor Yacht D MY 32

PLAN APPROVAL DOCUMENTATION TYPES DEFINITIONS

PLAN APPROVAL DOCUMENTATION TYPES DEFINITIONS

Green Technologies for Future Container Ship

SYLLABUS 1 CERTIFICATE OF COMPETENCY AS CHIEF ENGINEER OFFICER. (Examination Syllabus)

FACILITY COMPONENTS - ELEMENTARY SCHOOL

Inspection and Assessment Report For Dry Cargo Ships (FOD06) 11

Surveyor and Auditor Procedures for Subchapter M

INTERNATIONAL SAFETY MANAGEMENT AUDIT CHECKLIST VESSEL: GRT: DOC ISSUED TO: DATE/ PLACE:

Stage 3 Noise and vibration analysis NOISE

DESIGN CHECKLIST PROJECT NAME DISCIPLINE DATE TYPE REVIEW REVIEWER DRAWINGS REVIEWED

Appendix J - Custom Uniformat for EDU Migration

RULES FOR CLASSIFICATION OF FLOATING DOCKS

SIO Shipyard Representative Bi-Weekly Progress Report

PART II. HULL 1. DESIGN PRINCIPLES

LEVEL TWO NUMBERS AND TITLES. Introductory Information. Bidding Requirements. Contracting Requirements. Facilities and Spaces. Systems and Assemblies

MOBILE OFFSHORE UNITS

TECHNICAL SPECIFICATION

BOW OR STERN LOADING AND UNLOADING (BLU or SLU) FOR OIL CARRIERS, LIQUEFIED GAS CARRIERS OR CHEMICAL CARRIERS

Operational Equipment Tests. OP NOTICE TO SHIPPING No. N

Part 3 Hull Structures

REPLACEMENT FLOATING BRIDGE Statement of Requirements Rev A BCP/J/10384/00

MOBILE OFFSHORE DRILLING UNITS 2017

ISA_ F I R S T C L A S S W A T E R J E T P R O P U L S I O N L U X U R Y M O T O R Y A C H T T E C H N I C A L S P E C I F I C A T I O N

A/E Design Deliverable Checklist

SPAR s Estimating Cost Models. April 2017

FACILITY COMPONENTS - MIDDLE SCHOOL

MOBILE OFFSHORE UNITS OPERATING ON THE NORWEGIAN CONTINENTAL SHELF, N-NOTATION

S.Y. BRIGANTINE. vara d o r 2ooo M. Y. PR O J ECT moll de llevant, s/n te l fax

Operational Equipment Tests

RULES FOR CLASSIFICATION Yachts. Part 7 Fleet in service Chapter 1 Survey requirements. Edition January 2016 DNV GL AS

HULL - INTERNAL MEMBERS & SUBDIVISIONS

UNIT Shipboard Operations: An Introduction (SCQF level 6)

CABLE FERRY CONVERSION SPECIFICATION

CONSTRUCTION DOCUMENTS NECESSARY FOR PLAN REVIEW

IACS Rec s and Panel Responsible

BOW OR STERN LOADING AND UNLOADING (BLU or SLU) FOR OIL CARRIERS, LIQUEFIED GAS CARRIERS OR CHEMICAL CARRIERS

FAST CREW SUPPLIER Executive Summary. August 2008

XLR-Contents. XL Retractable Gear Contents. June 2005 XLR-Contents Page 1

MOBILE OFFSHORE DRILLING UNITS 2018

DESIGN DEVELOPMENT REVIEW PACKAGE CHECKLIST

TABLE OF CONTENTS Public Safety Building

Dr. Konstantinos Galanis

Ferguson Group Accommodation Service Vessel ASV Pioneer

MILITARY STANDARD SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS

Transcription:

December 2010

Gr. 0.0 Project Management Design Project Management Activity Gr. 1.1 Concept Design Concept General Arrangement - Preliminary Design Specification Interior Specification - Preliminary Lines and Body Plan - Preliminary (3D Geometry) Hydrostatic table - Preliminary Speed & Power Prediction (including range calculation) - Peliminary Interior Design - Preliminary 3d Model & Rendering Exterior Design - Preliminary 3D Model (Hull & Superstructure) Internal and External Free Heights - Preliminary Midship Section - Preliminary Capacity Plan (Fuel) - Preliminary Gr. 1.2 Basic Design for Contract Contract General Arrangement Technical Specification Interior Specification Contract Lines and Body Plan (3D Geometry) Contract Exterior Design - 3D Model (Hull & Superstructure) Contract Interior Design - 3d Model & Rendering Contract Architectural Drawings Contract Architectural Details Booklet Midship Section - Preliminary Capacity Plan - Preliminary Light Ship Mass Estimation - Preliminary Speed & Power Prediction (including range calculation) - Peliminary Trim & Stability booklet - Intact - Preliminary Trim & Stability booklet - Damage - Preliminary Seakeeping Analysis - Preliminary CFD Analysis - Preliminary Tank Model Tests Freeboard Calculation - Preliminary Tonnage calculation - Preliminary Equipment number calculation - Preliminary Electric Load Analysis - Preliminary Contract Maker List / Machineries & Equipment List 1/9 06/12/2010

Gr. 2.1 Basic Design - General Executive General Arrangement Building Technical Specification Building Interior Specification Lines and Body Plan (Included Rudder, Bilge Keel & Appendages - 3D Geometry) Executive Exterior Design - 3D Model (Hull & Superstructure) Mass & Centre of Gravity booklet Tonnage calculation Equipment number calculation Maker List / Machineries & Equipment List Furniture List Tank Plan with Capacities Pressure Test Plan Trim & Stability booklet - with Long. Strength Intact Stability - with Long. Strength Damage Stability - with Long. Strength Final stability calculation (intact, damage,, after stability trial ) Loading Manual Sounding tables for tanks Propellers Design Bow & Stern Thruster Design Vibration and noise Analysis Superstructure Lines Freeboard Calculation Freeboard Plan Structural fire protection Plan Escape Plan Field of vision Freeing ports arrangement and calculation Hatch Plan Manholes Plan Navigation lights Arrangement Anchor and Mooring Arrangement Insulation Plan Booklet for Insulation Details Door Plan Door List Room Number Plan Windows & side scuttles Arrangement Windows & side scuttles List Fire control & Safety Plan Damage control Plan Docking Plan 2/9 06/12/2010

Gr. 3.1 Lay-out Arrangement, General Chain Locker Arrangement Lifesaving Arrangement Helideck Deck Arrangement Tender Garage Arrangement Underwater Lights Arrangement Paparazzi Light Arrangement Lifts and Elevators Arrangement Hazardous Area Plan Boats and Davits Arrangement List and Trim of Boats and Davits Liferafts Arrangement List and Trim of Liferafts Rescue Boat Arrangement List and Trim of Rescue Boat Freefall Arrangement List and Trim of Freefall Fenders Arrangement Tackle Plan Mast Arrangement Pilot Ladder Arrangement Enbarkation Ladder Arrangement Hull marking Plan Gr. 3.2 Lay-out Arrangement, Machinery Compartments Main Engines Room Arrangement (main equipment) Main Engines and Gear Boxes Positioning (3D Geometry) Propellers and Shaft Line Arrangement (3D Geometry, Shaft Brackets Included) POD Propellers Positioning (3D Geometry) Propulsion Room Arrangement Main Engines Exhaust Piping Arrangement and Scoop Auxiliary Machinery Room Arrangement (main equipment) Sea-chest Arrangement Steering Gear Room Arrangement Bow Thruster Room Arrangement Stabilizers Room Arrangement Incinerator/Garbage Room Arrangement Switchboard Trafo Room Arrangement Pump Jet Converter Room Arrangement ECR Arrangement Pump Room Arrangement Purifier Room Arrangement Emergency Generator Room Arrangement 3/9 06/12/2010

Gr. 3.3 Lay-out Arrangement, Service Space Areas Lay-out arr. In Wheelhouse Lay-out arr. on Top of Wheelhouse (antenna arr.) Lay-out arr. in Paint Store Lay-out arr. in Bosun Store Lay-out arr. in Engineer's Workshop Room Lay-out arr. in Electrical Workshop Room Lay-out arr. in Engineer's store Lay-out arr. in Deck store Lay-out arr. in HI-FOG Room Lay-out arr. in Deck Office Lay-out arr. in Change Room Lay-out arr. in Laundry Lay-out arr. in Pantries Lay-out arr. in Galley Lay-out arr. in Crew Mess Room Lay-out arr. in Hospital Lay-out arr. in Batteries Room Lay-out arr. in Day Room Lay-out arr. in Meeting Room Lay-out arr. in Linen store Lay-out arr. in Heli Reception Lay-out arr. in Helirefuelling Room Lay-out arr. in Baggage & Uniform Store Lay-out arr. in Crew Gym Lay-out arr. in Fire&Safety Store Lay-out arr. in Foam Room Lay-out arr. in CO2 Room Lay-out arr. in Liferaft Machinery Room Lay-out arr. in Davit Machinery Room Lay-out arr. in HVAC Rooms Gr. 4.1 Main Structure Structural definition Plan Main scantling calculation (According to Class Rules) Midship section WT Bulkheads Profiles & Plans Shell expansion Aft ship (aft to fr.xx) Transversal Sections (from fr.xx to fr.yy) Fwd ship (fw to fr.yy) Superstructures - Profiles & Plans 4/9 06/12/2010

Superstructures - Transversal Sections Superstructures Racking Analysis FEA calculation of specific areas Rudder Structural Design Shaft Bossing Shaft Brackets Welding table Shell Doors - Scantling and Details i.w.o. Hydraulic Pin/Hinges connections Mast (scantling) Block Plan Material List for Purchasing - Plates Material List for Purchasing - Profiles Gr. 4.2 Foundation Main Equipment Main Foundation calculation Foundation of tender cranes Foundation of rescueboat cranes Foundation of main diesel generator Foundation of aux diesel generator Foundation of liferaft davit Foundation of lifeboat davit Foundation of Freefall Davit Foundation of Crane Foundation of Mooring Equipment Foundation of Incinerator Foundation of Emergency Generator Foundation of foreward gun Foundation of AHU Gr. 5.1 Outfitting Steel/Aluminium Bottom Plugs Arrangement Hawse pipe and anchor pocket (3D Model Geometry) Cathodic protection Plan Hatches Details Shell Doors and Platforms Arrangement Internal Stairs and ladder plan in accomodation Internal Stairs and ladder plan in engine area Internal Stairs and ladder plan in funnel Internal Stairs and ladder plan in tanks Internal Stairs and ladder plan in cargo holds Internal Stairs Details Internal Ladders Details Grating in machinery spaces Arrangement Railing in machinery spaces Arrangement 5/9 06/12/2010

External Stairs Arrangement External stairs Details Gangway Arrangement Gates on Bulkwark Overboard pipe and sea intake Arrangement Shaft Line Details (Pipes and Bearings) Loose tanks Traveling crane & lifting equipment in engine Room Gr. 6.1 Piping Diagram ICCP System Potable Water System Reverse Osmosis Sanitary & Deck Wash System Domestic Hot and Cold Water System Technical Water System FO Bunker and Transfer System FO Stripping System FO Overflow System FO Service System FO Purifying System LO Bunker and Transfer System LO Service System Watertight Damper Pneumatic System Sliding Door Pneumatic System Sewage System Grey Water and Internal Scuppers System Black Water System A/C Drain System Emergency Remote Quick Closing Valves Sea water cooling System Fresh water cooling System Working and Control Air System Bilge and ballast System Oily Bilge and Sludge Handling System Petrol and Kerosene Store Bilge System Anchor Wash and Chain Locker Drain System Open Deck Scupper System Oil and Water Drainage System Water Fire Fighting System HI-FOG fire fighting System Foam Fire Fighting System Air vent & sounding System Sounding Pipe Details 6/9 06/12/2010

Remote Tank Sounding System Hydraulic Diagram Gun Armament System Petrol & Kerosene System Chilled Water System Starting Air System Pulper System Fresh Water System for Swimming Pool and Whirlpool Exhaust Gas System Material List for Purchasing - Fittings Material List for Purchasing - Pipes Gr. 7.1 Basic Drawings, Electrical System Electrical load analisys and balance Short circuit currents calculation Schematic arr.ment of main switchboard Schematic arr.ment of emergency switchboard Switchboards Layout Starter list with schematic Diagram List of transformer Electrical tests panel Shore connection panel Battery calculation Preliminary one line cables runs Arrangement Schematic Arrangement of electrical distribution Circuit list Single line Diagram of power distribution Wiring Diagram of normal/emergency lighting System in ER Wiring Diagram of normal/emergency lighting System in accomodation Wiring Diagram of normal/emergency external lighting System Navigation equipment specification and panel One line nav/com/ams Systems Diagram Communication equipment specification and panel GMDSS equipment specification and panel One line sound powered telephones Diagram One line automatic telephones Diagram One line public address System Diagram One line central serial System Diagram One line TV System Diagram Wiring Diagram of fire detectors and general alarm PA and GA System Call Group 7/9 06/12/2010

Gr. 8.1 Basic Drawings, HVAC System General Arrangement mech. and natural ventilation Space ventilation calculation Air Conditioning One Line Diagram Gr. 9.1 Workshop Drawings, Hull (as per Block Plan Subdivision) 3D Model Output - Block xxx Workshop drawings - Block xxx Profile sketches - Block xxx Profile list - Block xxx Jiggs and/or Templates - Block xxx Weight and Centre of gravity - Block xxx Material List - Block xxx Part list - Block xxx Nesting sketches - Block xxx Gr. 9.2 Workshop Drawings, Superstructure (as per Block Plan Subdivision) 3D Model Output - Block xxx Workshop drawings - Block xxx Profile sketches - Block xxx Profile list - Block xxx Jiggs and/or Templates - Block xxx Weight and Centre of gravity - Block xxx Material List - Block xxx Part list - Block xxx Nesting sketches - Block xxx Gr. 10.1 Outfitting Production Document Machinery Spaces (as per MVZ subdivision) 3D MODEL - Database 3D MODEL - Plants AND VARIOUS FITTINGS MOUNTING Plans PIPE ISO SPOOLS (construction drawings) MATERIAL LISTS FOR PIPING VENTILATION DUCTS (construction drawings) MATERIAL LISTS FOR DUCTS CABLE TRAYS MATERIAL LISTS FOR CABLE TRAYS FOUNDATIONS OF MACHINERIES-FITTINGS (not included in workshop documents) 8/9 06/12/2010

Gr. 10.2 Outfitting Production Document Accomodation and Open Area (as per MVZ subdivision) 3D MODEL - Database 3D MODEL - Plants AND VARIOUS FITTINGS MOUNTING Plans PIPE ISO SPOOLS (construction drawings) MATERIAL LISTS FOR PIPING VENTILATION DUCTS (construction drawings) MATERIAL LISTS FOR DUCTS CABLE TRAYS MATERIAL LISTS FOR CABLE TRAYS FOUNDATIONS OF MACHINERIES-FITTINGS (not included in workshop documents) Gr. 11.1 Furnishing Engineering - Basic Design Free height in accommodation Free height in External Area Bulkhead and Lining Ceiling Plan Floor Plan Architectural Drawings Architectural Details Booklet Lighting Design Plan Internal and External Loose Furniture External Floor Plan External Ceiling Plan Interior 3D Model Interior Rendering Gr. 11.2 Furnishing Engineering - Joinery Documentation Workshop Drawings per each Room 9/9 06/12/2010