Fields of use Microbiology Electronics Optics Semiconductor Pharmaceuticals Chemistry Clinicals Powerplants Glass industry Galvanic industry Pure water Reverse osmosis water Series Reverse osmosis Meeting all your pure water demands Always one step ahead.
Series RO S A convincing performance: Multi-purpose purity the reverse osmosis equipment RO...S and RO...SMB series Typical applications Series RO...S Feed for ultrapure water systems, general chemistry, laboratory washing machines, water for autoclaves and environmental chambers, buffer preparation Laboratory, medical and industrial applications all need pure water in various qualities and quantities. The RO... series produces pure water for a wide variety of applications by reversing the natural osmosis process to deionize water in an environmentally friendly manner. Pure water produced via reverse osmosis can be put to a number of uses in laboratories for Flowsheet RO...S switch gauge Pump rinsing laboratory glass ware or as feed water to autoclaves, climatized cabinets and ultrapure water systems. The RO series focuses on economic efficiency, combining a compact design with highquality components and intelligent controls. The quality of the pure water produced depends on the quality of the inlet water entering the system. RO-Module The reverse osmosis RO...S series is designed to produce large amounts of purified water with conductivity values depending on the salt content of the feed water (for example 1000 µs/cm tap water quality: < 20 µs/cm product water). The deionizaton rate is at least 98 %. Additional equipment, such as different tank sizes and pressure pumps, can be added to the plant according to customers individual needs. The system can, for instance, be set up as a central water treatment plant within a building and supplemented with accessories to form a closed circuit pipeline. All systems are equipped with an RS 232 interface. We would be happy to advise you! Flow meter Pre-Filter control Service Restrictor RO...S 130 200 350 500 750 1000 1250 Permeate output at 15 C l/h 130 200 350 500 750 1000 1250 Salt rejection rate % 98 98 98 98 98 98 98 Recovery rate max. % 75 75 75 75 75 75 75 Operating pressure max. bar 14 14 14 14 14 14 14 Power consumption kw/h 0.55 0.55 0.55 0.55 1.6 1.6 1.6 Dimensions H x W x D mm 1650 x 600 x 600 1650 x 600 x 750 Catalogue Number 3010 3011 3013 3014 3015 3016 3017 2
Typical applications Series RO SMB Series RO...SMB Feed for ultrapure water systems, general chemistry, laboratory washing machines including final rinse, water for autoclaves and environmental chambers, buffer preparation, photometry, spectrophotometry, media preparation The RO...SMB series incorporates RO membranes and mixed-bed cartridges to produce pure water with conductivity values under 0.1 µs/cm. The reverse osmosis membrane is the initial deionization component, leaving the mixed-bed ion exchanger to deal with post-deionizaton. This reduces the cartridge exchange frequency and, in turn, the operating costs. We have integrated a completely dischargeable storage tank and a pressure booster pump. This system can also be operated as a central water treatment facility in, for instance, a laboratory wing with a closed circuit pipeline. Additional integration options include UVoxidization and disinfection, CO 2 traps for the tank, sterile filtration and ultrafiltration. All units are supplied ready for immediate use, with all equipment installed into a cabinet and fitted with an RS 232 interface. RO...SMB 130 200 Permeate output at 15 C l/h 130 200 Pure water quality µs/cm < 0.1 < 0.1 Recovery rate max. % 75 75 Operating pressure max. bar 14 14 Pure water pressure bar 1.5 to 3 1.5 to 3 Power consumption kw/h 0.55 0.55 Dimensions H x W x D mm 1650 x 600 x 600 Catalogue Number 3110 3111 Flowsheet RO...SMB switch gauge Pump RO-Module Storage tank Ball Ball Sample Flow meter Pre-Filter control Membrane pressure tank Service Restrictor Pump switch Deionizer 3
Information pure water The principle behind El-Ion electro-deionization Our electro-deionization process utilizes resin chambers in a single bed configuration to further deionize the water. Microbiological analysis has proven a remarkable reduction in the number of bacteria with high CFU counts in the feed water. The electrodes that contact the resin create an electric potential in the water that is unsuitable for bacteria to live in. The intermediate ph shift in the cells creates a positive effect for the removal of SiO 2 and CO 2 and helps as well to reduce bacterial growth. An other advantage of electro-deionization is continuous operation. The resin is continually regenerated without the use of any chemicals. The energy consumption of this process is very low and serves as an advantage for the environment. No chemicals and low power consumption. The principle of the El-Ion cell system outlet [µs/cm] 100,00 10,00 The most convincing advantage of the RO...plus series is the integrated deionization El-Ion cell. Comparison Ix-Resin / Electro-deionization El-Ion 1,00 0,10 0,01 20 40 60 80 100 120 140 Time in days Ix-resin El-Ion When a mixed bed polishing module is used, the conductivity of the product water increases during normal operation. The resin has to be changed or regenerated if the maximum acceptable conductivity is reached. If using El-Ion electro-deionization, the product water quality is constantly at the highest level. No regeneration, no quality variation. Simply high quality water at any time. raw water / dissolved salts 100% cation exchange membrane anion exchange membrane concentrate salts H O 2 + H + SO 2 Ca 2+ 4 Mg 2+ HCO 3 O 2 Cl OH H 2 semipermeable membrane cation exchange chamber Na + CO 2 3 HSiO 3 anion exchange chamber pure water / permeate dissolved salts 1 2 % + H drain OH concentrate chamber conductivity: 2 30 µs/cm ultra pure water: 0.055 µs/cm 4
Series RO plus A highly perfected technology reverse osmosis incl. El-Ion electro-deionization Consistently high water quality without the use of chemicals The combination of RO...S with the El-Ion electro-deionization cell significantly improves the quality of the pure water. The RO...plus units are available with either a singlestage or a two-stage El-Ion electrodeionization cell. Our systems are distinguished by their ability to produce a consistent level of pure water quality, reaching conductivity values less than 0.1 µs/cm in singlestage plant and below 0.07 µs/cm in two-stage plant. Typical applications All types Feed for ultrapure water systems, general chemistry, laboratory washing machines including final rinse, feed for autoclaves and environmental chambers, buffer preparation, photometry, spectrophotometry, general chemical analysis, media preparation, protein electrophoreses, microbiological media preparation, cytology and histology work, electrophoreses The design of RO...plus equipment is timeless and practical. Pure water is produced in highest quality at rates of between 120 and 750 l/h. RO...plus, El-Ion single-stage RO...plus 120 180 260 310 500 750 Pure water output at 15 C l/h 120 180 260 310 500 750 Pure water quality µs/cm < 0.5 < 0.5 < 0.5 < 0.5 < 0.5 < 0.5 Typical pure water quality µs/cm < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 Recovery rate max. % 75 75 75 75 75 75 Operating pressure max. bar 14 14 14 14 14 14 Power consumption kw/h 0.6 0.7 0.75 0.8 1.5 1.7 Dimensions H x W x D mm 1650 x 600 x 600 1650 x 600 x 750 Catalogue Number 3051 3056 3061 3066 3071 3076 RO...plus, El-Ion twin-stage RO...plus 120 180 260 310 500 750 Pure water output at 15 C l/h 120 180 260 310 500 750 Pure water quality µs/cm < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1 Typical pure water quality µs/cm < 0.07 < 0.07 < 0.07 < 0.07 < 0.07 < 0.07 Recovery rate max. % 75 75 75 75 75 75 Operating pressure max. bar 14 14 14 14 14 14 Power consumption kw/h 0.6 0.7 0.75 0.8 1.5 1.7 Dimensions H x W x D mm 1650 x 600 x 600 1650 x 600 x 750 Catalogue Number 3050 3055 3060 3065 3070 3075 5
Series RO plus Flowsheet RO plus switch gauge RO-Module Flushing port Pump El-Ion cell Flow meter Restrictor Pre-Filter control Service Restrictor The TOC content is less than 30 ppb. The special layout of the separate bed process and the associated shift in ph value towards the acidic reduces the bacterial count and prevents bacterial growth in the cell. No other system works more efficiently or more economically, as the El-Ion cell only has a 10 % loss rate. This is a particularly inexpensive system in terms of operating costs, and maintenance is minimal. And the compact cabinet design means that our system is at home in the smallest of spaces. All plant is equipped with an RS 232 interface. The side panels are easy to remove from all RO...plus cabinets. This makes it very easy to access the equipment inside (equipment photographed without front and side panels). 6
Specialized equipments Specialist applications that meet industrial and FDA standards Many applications need specialized equipment take for example the pharmaceuticals industry. We have therefore developed and built systems in which all parts that come into contact with water are made of stainless steel. These systems meet all FDA requirements. The up-and-coming fuel cell technologies can benefit from our equipment too. We can also produce equipment that meets other industrial standards. All units are equipped with an RS 232 interface. SG can plan and build systems in all sizes and configurations and customize it to meet your needs. We welcome the challenge! Industrial scale 2-stage reverse osmosis equipment. Fields of use Microbiology Electronics Optics Semiconductor Pharmaceuticals Chemistry Clinicals Powerplants Glass industry Galvanic industry RO G equipment is available for production rates of up to 34.000 l/h. Customized RO/El-Ion combination supplying fuel cells. Stainless steel equipment meets FDA standards for use in the pharmaceuticals industry with integrated El-Ion electrodeionization cell. RO plus and ultrapure water system incorporated into a single unit. 7
Information SG worldwide Our partners in: Algeria Argentina Australia Austria Bahrain Bangladesh Belgium Brazil Bulgaria Canada Chile China Colombia Croatia Cyprus Czech Republic Denmark Dominican Republic Ecuador Egypt England Estonia Finland France Ghana Germany Greece Hong Kong Hungary Iceland India Indonesia Iran Iraq Ireland Italy Japan Jordan Kazakhstan Korea Kosovo Kuwait Latvia Lebanon Libya Lithuania Luxembourg Malaysia Marocco Mexico Netherlands Nigeria Norway Oman Pakistan Peru Philippines Poland Portugal Qatar Romania Saudi Arabia Serbia Singapore Slovakia Slovenia Spain Sri Lanka South Africa Sudan Sweden Switzerland Syria Taiwan Thailand Tunisia Turkey Ukraina United Arab Emirates USA Venezuela Vietnam Yemen Headquater: SG Wasseraufbereitung und Regenerierstation GmbH Fahrenberg 8 22885 Barsbüttel Tel.: 040 / 6 70 868 6 Fax: 040 / 6 70 868 44 e-mail: info@sgwater.de Internet: www.sgwater.de USA: SG Water USA, LLC 25 Front St. Suite 303 Nashua, NH 03064 Phone: (603) 598-0691 Fax: (603) 598-0689 e-mail: info@sgwaterusa.com Internet: www.sgwaterusa.com We reserve the right to make technical changes.