Material Safety Data Ajicure PN-40 Date Printed : 03/04/03 CAS No : 134091-76-2 Revision No : File Number : Issue Date :000410 EINECS No : NLP TSCA: Registered (Accesion No. 78730) 1. CHEMICAL PRODUCT CHEMICAL CHARACTERIZATION : Amine adduct with epoxy resin. PROODUCT : Product used as : Curing agent and curing accelerator for epoxy resin, etc. Company/Undertaking identification :. 15-1, Kyobashi 1 chome, Chuo-ku, Tokyo 104 Japan Emergency telephone number of the company : Telex: J22690, J24711, J24808 (AJINOMOTO CO) Fax : (03)5250-8259 Tel : (03)5250-8151 2. COMPOSITION Amine adduct with epoxy resin Caution: Substance not yet fully tested. 3. HAZARD IDENTIFICATION No data. 4. FIRST-AID MEASURES RESPIRATORY SYSTEM : Remove person to fresh air If breathing difficulty or discomfort occurs. Seek medical attention if effe persist. INGESTION : Do not induce vomiting unless medical assistance is not immediately available. Never give anything mouth to unconscious person. Seek medical attention. EYES : Immediately flash eyes with water for at least 15 minutes and seek medical attention. SKIN : Wash solid areas with soap and water. Seek medical attention if swelling or reddening occur. 5. FIRE-FIGHTING METHODS Extinguishing media : water, foam, CO 2,dry chemical,. Special fire protective measure : Not necessary 6. ACCIDENTAL RELEASE MEASURES Shovel up spilled material and reuse, or place in a close, labeled container and dispose according regulation.
7. STORAGE AND HANDLING Storage : Under normal condition the material is stable. Avoid humidity and store cool place. Handling : Avoid powder dusting. Chemical safety goggles. Rubber gloves. Safety shower and eye bath. Mechan exhaust required. Do not inhale. Do not get in eyes, on skin, on clothing. Wash thoroughly after handl Keep tightly closed. 8. EXPOSURE CONTROL / PERSONAL PROTECTION Exposure Standard : The substance with exposure limit is : Notation 1: Exposure Standard: 2nd substance with exposure limit is : Notation 2: PERSONAL PROTECTION Respiratory Protection: Type of Cartridge ( if Applicable): Eye Protection : Safety Spectacles Hand Protection : Gloves butyl or nitrile rubber Skin Protection : Industrial Hygiene : no eating drinking or smoking in the work area. Ventilation : At room temperature handle in a well ventilated Area. Use exhaust ventilat if exposure to fume or aerosol can occur. PROTECTION AGAINST FIRE AND EXPLOSION Not flammable but combustible if exposed to external flame. Dust explosion can occur. EC SAFETY PHRASES
9. PHYSICAL AND CHEMICAL PROPERTIES Appearance : Powder Color : Pale yellow Odor : Slight characteristic Softening Point : 100-130C Decomposition : >300C Flash Point (COC) : Boiling Point : Density at 25Åé : Specific Gravity : Solubility in Water (20Åé) : Trace Solubility in Other : Insoluble (methanol Soluble (DMSO) (10wt%/Sol) ph-value : Vapor Pressure : Concentration in air : Concentration in air : Viscosity (20Åé) : Pour Point Explosion Limits - Upper : No data Thermal Decomposition : >300Åé Autoignition Temp : Lower : No data 10. STABILITY AND REACTIVITY CONDITION TO AVOID : High temperature HAZARDOUS REACTIONS : The reaction with epoxy resin is exothermic. Comments : HAZARDOUS DECOMPOSITION PRODUCTS Thermal decomposition and burning produces fumes containing oxides of carbon.
11. TOXICOLOGICAL INFORMATION (our Laboratory Data) LD50 Acute Oral Toxicity:> 2.0g/Kg : Mice LC50 Acute Inhalation : mg/1 : Eye irritation : Skin irritation : Mildly: Rabbit Sensitization : No data Further Information :Mutagenicity : Negative Caution : substance not yet fully tested. 12. ECOLOGICAL INFORMATION LC50 (96 Hour): mg/l EC50 (48 Hour) : mg/l BiodegradabiIity (Sturm Test) : None Biodegradability (Coupled units) : Further Information : WGK Classification : 13. DISPOSAL CONSIDERATIONS Destroy by fire with an incinerator. 14. TRANSPORT INFORMATION IMDC No Packing Groups UN No IATA-DGR Class NO TREMCARD RID/ADR Class No Poisons Schedule Non-Acute Hazard Code Other Information PAGE4
15. REGULATORY INFORMATION Classification and labeling according to EC Directives 67/548, and 2lst and 22 Adaptations 94/69 & 96/54 EC RISK PHRASES Other Hazards EC SAFETY PHRASES 16 OTHER INFORMATION PRODUCTS SAFETY AJINOMOTO CO.,INC. (JP) Specialty Chemical Department manufacturing high qual research based products designed and marketed for specific applications which described in our Technical Bulletin already in your possession. For safety reasons, it is IMPERATIVE that customers ; - l. Ensure that all those within their control who use the products are supplied with relevant information contained within the Material safety Data Sheet and Techni Bulletin concerning the applications for which the product is designed and any instructio or warnings contained therein. 2. Consult with AJINOMOTO Process Additives Division before using or supplying product for any other application. A US / Canadian version of this Safety Data sheet is using available