Phone 973-575 7445 -Fax. 973-575 405 Quote: Rev A Currency: USD $ Date : Page : 25 of 46 #) PACKSERVICE PS50 Seq Description Qty USD $ 0 AUTOMATIC CASE PACKER, PACKSERVICE Model "PS-50" Automatic machine suitable to receive single or bundled products on infeed conveyor, collate and introduce them into a case taken from magazine, tape close the case with non overlapping self adhesive tape and discharge the sealed case. The basic machine is complete in all following parts and delivered with the Πmark. Structure in finished and painted aluminium panels. Covers in LEXAN. Carton infeed conveyor 400mm (55") long. Pneumatic product elevation assembly. Infeed guides for cartons on the elevation section. Fix product collation hopper and mobile transfer hopper into case. Inclined magazine for folded cases. Motorized case pick-up arm with suction cups. Adjustable case transport chain. Front side case flap folders. Rear side case flap folders driven by brushless motors. Upper and lower case transport belts. Two self-adhesive taping units for not overlapping finish. MACHINE COMPLETE WITH: Self contained VENTURI type vacuum source. Pneumatic & Electric layouts, wiring, electric cabin and command panel according to Πnorms. Command Panel with Display SIEMENS "TP70B", Touch Panel, 5,7" color. Electric functions commanded by PLC SIEMENS "S7-300" including self-diagnosis. SAFETIES: Safety Guard with electric interlocks, SCHMERSAL safety micro switches. Standard voltage: 400 Volts, 3-phase, Neutral & Ground or 220 V & T, 50 Hertz. Machines color metal Grey, Type ECO INVERPUR/A 40655. Machine complete in all parts equipped to handle one size product in infeed, one collating pattern and one case size, suitable for non overlapping self adhesive tape sealing.
Phone 973-575 7445 -Fax. 973-575 405 Quote: Rev A Currency: USD $ Date : Page : 26 of 46 Seq Description Qty USD $ 20 Voltage, Cycles or Neutral different from standard. Electric power arrangement required for different tension and/or cycles than the standard 400 Volts, 3-phase + Neutral + Ground, Frequency 50 Cycles. Electrical wiring without the Neutral. For machines equipped with BRUSHLESS motors, transformers are required. Power supply should be within a maximum tolerance of +/- 0%. 30 Electric components marked UL-CSA, different from our standard execution. Electric layout with UL-CSA marked components and wiring. All possible will be done to grant the completeness of the electric plant with UL-CSA markings. This also depends on the availability and possibility to retrieve the parts within our market as well as the availability of proper marked parts from our vendors. 40 Inland freight to your facility. 50 Cartoning Machine packed in wooden sea-freight crate with sealed barrier bag and Silica gel Desiccant, ex works (EXW- INCOTERMS). BASIC MACHINE 60 Placement of a commercial case Labeler, complete with dispenser and applicator. Customer must deliver it to our Works, free of all charges. The placement includes connection, mounting of the dispenser, applicator and testing. Cost of Labeler not included. 70 One Re-Pack Series 6 Print and Apply Labeling System Description of Application To print and apply various sized pressure sensitive labels. The standard applicator is provided with a U arm that permits the labeler to be mounted from the top, bottom or side of the product. Labeling Equipment Proposed: Re-Pack Series Six Print and Apply, Tamp Labeling Head to consist of: 3/8 thick aluminum base and mounting plate. Pneumatic actuated vacuum / tamp assembly. The standard stroke length is 3. Longer stroke cylinders are available. 2 O.D. unwind / supply reels. Larger unwind capacity is
Phone 973-575 7445 -Fax. 973-575 405 Quote: Rev A Currency: USD $ Date : Page : 27 of 46 Seq Description Qty USD $ available as an option. 4 ½ maximum web width with adjustable guide collars. An optional 6 wide web width kit is available. Please note an upgraded print engine with a wider print area may be needed to upgrade web width capacity. Integrated Sato 8485 SE print engine. Other brands of print engines will integrate with this system. Please contact us with specifications on the intended print engine so that we may make you aware of any additional charges. Separately powered rewind motor with adjustable tension control The rewind shaft is housed in a bearing support tube. Photoelectric product sensor. This device is mounted in an adjustable bracket for ease of set-up. Push button controls for product delay and tamp dwell. These controls allow for ease of set up and operation. The applicator is PLC controlled. An expanded device is used to allow for the simple integration of an alarm package or external triggers. U arm head support allowing for horizontal and vertical mounting. 80 Idle Roller Belt for case transport, length 750mm (29.5"). Without safety protection. 90 Different Shippers and Cartons Additional size parts suitable to handle a different size of cartons in infeed and different size of shippers. 00 Automatic Restart after Overload Additional charge for automatic machine restart as soon as the following machine is reset to normal working conditions. The Display will indicate "Downstream Machine is Stopped". MODEL TOTAL 2
Phone 973-575 7445 -Fax. 973-575 405 Quote: Rev A Currency: USD $ Date : Page : 38 of 46 Annex to proposal. Description of basic machine. AUTOMATIC CASE PACKER, PACKSERVICE Model PS-50 Automatic machine suitable to receive single or bundled products on infeed conveyor, collate and introduce them into a case taken from magazine, tape close the case with non overlapping self adhesive tape and discharge the sealed case. The basic machine is complete in all following parts and delivered with the Πmark. - Structure in finished and painted aluminum panels. Covers in LEXAN. Machine safety guards with electric interlocks. - Carton infeed conveyor 400mm (55 ) long with speed adjustment. - Pneumatic product elevation assembly. - Infeed guides for cartons on the elevation section, adjustable by handwheel. - Fix product collation hopper and mobile transfer hopper into case in stainless steel AISI 304S. - Inclined magazine for folded cases. - Motorized case pick-up arm with suction cups. - Adjustable case transport chain. - Front side case flap folders. Rear side case flap folders driven by brushless motors. - Upper and lower case transport belts. - Two self-adhesive taping units for not overlapping finish. FUNCTIONAL FEATURES The Casepacker PS-50 accepts a wide size range. Cartons presented in infeed at height of approx. 850-950 mm (33,5-37,4 ) are conveyed downwards through an inclined conveyor to a height of approx. 500 mm (9.5 ), where they pass onto the vertical collation unit. On the collation unit, if required, depending on the size range, a pre-collation station can be foreseen. This allows recovering the time needed to transfer the cartons into the hopper or into the case. A motorized arm with suction cups picks the flat case, squares it and inserts it between the lugs of the transport chain. With the next sequence the case is transferred to the loading position. The moving hopper placed outside the fix hopper, shifts into the open case. Product loading is performed without having to move neither the main hopper nor the case.
Phone 973-575 7445 -Fax. 973-575 405 Quote: Rev A Currency: USD $ Date : Page : 39 of 46 After loading, the case is transferred to the two discharge belts. During transport, case closure and taping is achieved. Cases can be sealed as follows: - Standard: non-overlapping self adhesive tape, included in the basic machine. - Optional: overlapping self adhesive tape, or - Optional: Hot-melt closure with a NORDSON unit. MACHINE COMPLETE WITH: All parts equipped to handle one size product in infeed, one collating pattern and one case size, suitable for non overlapping self adhesive tape sealing. Speed: up to 0 Cases/Minute - Example: cases containing 00 cartons or > over 00, the infeed capacity is approx. 200 cartons/minute. The output always depends on: - Product feeding possibilities - Required configuration and on the types of mounted accessories. TECHNICAL DATA Mod. PS 50 - Standard Machine Standard Color: Standard Voltage: Electric Cabinet: Advisory Lights: Electric Components: Pneumatic Components: Mechanical Components: Electronic Components: Electric Functions: Metal Grey ECO INVERPUR/A 40655. Anti-corrosion paint, water based. 400 Volts, 3-phase, Neutral & Ground or 220 Volts & Ground. Frequency: 50 Cycles. Other specs available as optional. Electric installations, Panel Layout and wiring according to ΠNorms. Placed on the rear side of the machine, opens completely for easy accessibility. Staggered TELEMECANIQUE green color light placed on top of the machine frame. Steady light = running machine. Flashing light = machine in automatic restart mode. Additional light colors (red, orange, blue or white) are available as an option. Switches: SIEMENS Relay: FINDER Solenoids, Cylinders and pressure reduction: SMC Motor reducer: BONFIGLIOLI Bearings: SKF Inverter: LENZE Commanded by SIEMENS PLC S7-300, including Autotest.
Phone 973-575 7445 -Fax. 973-575 405 Quote: Rev A Currency: USD $ Date : Page : 40 of 46 Command Panel: SIEMENS "TP70B", Touch Panel, backlit 5,7" blue mode display. Touch for finger- pens and glove operation. SIZE DATA Complete with start, stop, reset and emergency push buttons. - Jog connector. - Password protected services access. - Display to visualize advisory messages to the operator. - Function and machine status information. - Production data: total hors, partial hours (with reset) and machine speed. - Other displays depending on mounted accessories. - Message presentation including services and Help menu. - All displays are in Italian and it is possible to add other two languages. - Conforming to EMC norms (Electro Magnetic Compatibility) therefore No disturbance to other surrounding electronic equipment. The indicated data are for reference only. They are subject to be modified whenever manufacturing needs dictate so. Product Sizes: A from 25 to 440mm (0,984 7.322 ) B from 5 to 40mm (0.59 5.5 ) H from 65 to 80mm (2.56 7 ). Case Sizes: External RSC case dimensions: A Length from 40 to 450mm (5.5 7.7 ) B Width from 20 to 350mm (4.724 3.78 ) H Height (Depth) from 75 to 350mm (2.95 7.76 ) Infeed Height: 850 950mm (33.465 37.4 ) Discharge Height: 730 mm (28.74 ) Installed Power: 7 kw, tape closing version. 0 kw, NORDSON Hot-Melt glue closure version. Air Consumption: 70 NL/min. @ 6 Bar Vacuum Pump: BECKER dry pump. Noise Level: Below 78 db(a) Approx. Dimensions: Length 326mm (0.25 ), with conveyor 400mm (4.6 ), Width 75mm (5.6 ), Height 450mm (4.75 ) Net Weight: 200 Kg. Approx.