MATERIAL SAFETY DATA SHEET

Similar documents
MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

1. PRODUCT AND COMPANY IDENTIFICATION

1. PRODUCT AND COMPANY IDENTIFICATION. : Product Stewardship (770)

1. PRODUCT AND COMPANY IDENTIFICATION. : Product Stewardship (770)

1. PRODUCT AND COMPANY IDENTIFICATION

W2388BASE PLASTIC ERASER COMPOUND

1. PRODUCT AND COMPANY IDENTIFICATION

10% Ultramarine Violet 5011

1. PRODUCT AND COMPANY IDENTIFICATION. : Product Stewardship, (314)

PANTONE 365U

Copper(II) chloride dihydrate. Emergency telephone number Chemtrec (Within USA) (Outside USA)

1. PRODUCT AND COMPANY IDENTIFICATION

1. PRODUCT AND COMPANY IDENTIFICATION

200CPEN PANTONE(R) 200 C SIMULATION

TEAL PEARL (Q )

1. PRODUCT AND COMPANY IDENTIFICATION

1. PRODUCT AND COMPANY IDENTIFICATION

Bergamid A70 G30 natural

24 hr. Emergency Contact (CHEMTREC) US Tel: Int l. Tel PERSONAL CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Material Safety Data Sheet BISPHENOL A

Material Safety Data Sheet

Material Safety Data Sheet (Tris(2-chloroisopropyl) Phosphate)

MATERIAL SAFETY DATA SHEET

1. PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON REGULATED INGREDIENTS. Components CAS-No. Weight % Titanium dioxide

MATERIAL SAFETY DATA SHEET MARBALEASE IMR-1 Internal Mold Release

1. PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON REGULATED INGREDIENTS

Material Safety Data Sheet 20026D

DST PLAD Durable Adhesive

Material Safety Data Sheet

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

2602 FLORIDA PURPLE PEC

1. PRODUCT AND COMPANY IDENTIFICATION. Technical Assistance Chemtrec (USA) Canutec (Canada)

1. PRODUCT AND COMPANY IDENTIFICATION. : Product Stewardship (770)

Adipic acid dihydrazide. Emergency telephone number Chemtrec (Within USA) (Outside USA)

SAFETY DATA SHEET. Section 1 Chemical Product and Company Identification

OnFlex-S HF 50A-3S1981 natural UV

*MATERIAL SAFETY DATA SHEET*

Material Safety Data Sheet

Tris(ethylenediamine)nickel(II) chloride. Emergency telephone number Chemtrec (Within USA)

1. PRODUCT AND COMPANY IDENTIFICATION. : Product Stewardship (770)

Material Safety Data Sheet Product No , Cutting Fluid, Soluble Oil Issue Date ( ) Review Date ( )

MATERIAL SAFETY DATA SHEET

1. PRODUCT AND COMPANY IDENTIFICATION

M A T E R I A L S A F E T Y D A T A S H E E T

December 27, 2012 Page 1 of 5 MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

HAZARD COMMUNICATION SAFETY DATA SHEET TUF-CUT THREADING OIL- DARK SECTION I PRODUCT INFORMATION

Starch, Potato, Soluble, Powder, ACS

PS 2000 Hot Melt November 3, 2015 ***SAFETY DATA SHEET *** Page 1 of 5

Physical Health Environment Not Hazardous Not Hazardous Not Hazardous

Emergency telephone number Chemtrec (Within USA) (Outside USA) See Section 12: ECOLOGICAL INFORMATION.

June 29, 2006 Page 1 of 5 MATERIAL SAFETY DATA SHEET

Section 1 - Chemical Product and Company Identification. Section 2 - Composition, Information on Ingredients

Emergency telephone number Chemtrec (Within USA) (Outside USA) See Section 12: ECOLOGICAL INFORMATION.

4-tert-Butylcyclohexanol, mixture of cis and trans. Emergency telephone number Chemtrec (Within USA)

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet 72479D

Material Safety Data Sheet

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION. Revised on 09/28/2015 Page 1 of 5

GHS Classification: 1. PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

Revision Date 6-May-2015 Version 1 1. PRODUCT AND COMPANY IDENTIFICATION. Foremost 3343A Fast Dry Fissure & Crack Filler, Part A

Preparation Date: 10-Apr-2013 Revision Date: 29-May-2015 Revision Number: 2

1. Identification of the Substance/Preparation and of the Company/Undertaking. 2. Hazards Identification

1-Naphthalenesulfonic acid. Emergency telephone number Chemtrec (Within USA) (Outside USA)

Material Safety Data Sheet RUST VETO 4214-W

SAFETY DATA SHEET. Chemical Name Wt.% CAS Dimethyl siloxane, hydroxy-terminated Silicon dioxide

MATERIAL SAFETY DATA SHEET WR MEDICAL ELECTRONICS CO. HYDRATING CREAM

5016 Monument Ave. Richmond, Virginia (804)

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING. Chemtrec HAZARDS IDENTIFICATION

Material Safety Data Sheet

Preparation Date: 03-Dec-2007 Revision Date: 29-May-2015 Revision Number: 2

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION. Revised on 02/15/2016 Page 1 of 5

Gold ( ) 70 ND ND No No No Toluene ( ) NE 100 ppm 100 ppm No No No Arcosolve PM ( ) NE 100 ppm 100 ppm No No No.

MATERIAL SAFETY DATA SHEET. Issue date 01 June 2011 Revision date 08/30/2015

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

MATERIAL SAFETY DATA SHEET LITH-X

Material Safety Data Sheet Revision Number 1

H.B. Fuller EY-4014-A

RAID WASP & HORNET KILLER 6 (REG. NO )

MATERIAL SAFETY DATA SHEET PLUS-FIFTY C

Safety Data Sheet 1. PRODUCT IDENTIFICATION

Page 1 of 5 MATERIAL SAFETY DATA SHEET Last Updated February 19, 2010

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Yellow Print Cartridge

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

Material Safety Data Sheet

Gulf Harmony Synthetic Hydraulic Fluid ZF

Series 22 High Yield Return Program Cartridge, Tri-Color

Transcription:

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY INFORMATION Product Name: SN 600 4823-00 SN 700 3569-00 SN 750 3568-00 SN 850 4840-00 Manufacturer Information: Marketer Information: Product Use: Holly Refining & Marketing Tulsa, LLC 1700 South Union Ave. Tulsa, Oklahoma 74107 HollyFrontier Refining & Marketing LLC 1700 South Union Tulsa, Oklahoma 74107 Base Oil Emergency Phone Numbers: Chemtrec (800) 424-9300 Holly Refining & Marketing Tulsa, LLC (918) 594-6000 FAX (918) 594-6909 2. COMPOSITION/INFORMATION ON INGREDIENTS Component CAS No. Amount (Vol%) DISTILLATES (PETROLEUM) SOLVENT DEWAXED HEAVY PARAFFINIC 64742-65-0 45 90 RESIDUAL OILS (PETROLEUM), SOLVENT-DEWAXED RESIDUAL OILS (PETROLEUM) SOLVENT REFINED 64742-62-7 64742-01-4 0 55 0 55 EXPOSURE GUIDELINES (SEE SECTION 15 FOR ADDITIONAL EXPOSURE LIMITS) CAS No. Governing Body Exposure Limits 3. HAZARDS IDENTIFICATION EMERGENCY OVERVIEW Poses little or no immediate hazard. Hazards Ratings: Key: 0 = least, 1 = slight, 2 = moderate, 3 = high, 4 = extreme Health Fire Reactivity PPI SN 600; SN 700; SN 750; SN 850; SN500CH; SN 525WB; SN 600SW; SN 600WB; SN 90BS; SN 120BS; SN 145BS; SN 2000BS 1

NFPA 0 1 0 HMIS 0 1 0 X POTENTIAL HEALTH EFFECTS PRE-EXISTING MEDICAL CONDITIONS The following diseases or disorders may be aggravated by exposure to this product: Available data does not identify any conditions. INHALATION No acute effects expected. LC50 (mg/l): LC50 (mg/m3): LC50 (ppm): SKIN Practically non-toxic if absorbed through the skin. Substance may cause slight skin irritation. Contact with heated product may cause thermal burns. Draize Skin Score: Out of 8.0 LD50 (mg/kg): EYES Non-irritating to the eyes. INGESTION Practically non-toxic if ingested. LD50 (g/kg): 4. FIRST AID MEASURES INHALATION Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen and continue to monitor. Get medical attention if cough or other symptoms develop. SKIN Wash with soap and water. Get medical attention if irritation develops or persists. Wash clothing before reuse. For contact with heated product, flush immediately with plenty of cool water for at least 20 minutes. EYES Hold eyelids apart and flush eyes with plenty of water for at least 20 minutes. If eye irritation persists, obtain medical treatment. For contact with heated product, flush immediately with plenty of cool water for at least 20 minutes. Get medical attention. INGESTION Material is practically non-toxic. Induction of vomiting is not required. Get medical attention immediately. 5. FIRE FIGHTING MEASURES EXTINGUISHING MEDIA Water spray; Regular foam; Dry chemical; Carbon dioxide; FIRE FIGHTING INSTRUCTIONS Wear structural fire fighting gear. As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. FLAMMABLE PROPERTIES SN 600; SN 700; SN 750; SN 850; SN500CH; SN 525WB; SN 600SW; SN 600WB; SN 90BS; SN 120BS; SN 145BS; SN 2000BS 2

Typical* Minimum Maximum Text Result Units Method Flash Point See TDS 226 (See TDS) C D92 Autoignition Temperature No data F D2155 Lower Explosion Limit % N/A Upper Explosion Limit % N/A * Refer to TDS (Technical Data Sheet) for specific typical data for each product. 6. ACCIDENTAL RELEASE MEASURES Contain spilled liquid with sand or earth. DO NOT use combustible materials such as sawdust. Use appropriate personal protective equipment as stated in Section 8 of this MSDS. Advise the Environmental Protection Agency (EPA) and appropriate state agencies, if required. Absorb spill with inert material (e.g., dry sand or earth), then place in a chemical waste container. Vacuum or sweep up material and place in a disposal container. 7. HANDLING AND STORAGE HANDLING Wash thoroughly after handling. STORAGE NFPA class IIIB storage. Flash point is greater than 200 F. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Consult with a Health and Safety Professional for specific selections. ENGINEERING CONTROLS Ventilation is normally not required when handling or using this product to keep exposure to airborne contaminants below the exposure limit. PERSONAL PROTECTION EYE PROTECTION Safety glasses with side shields or splash proof chemical goggles are recommended to protect against the splash of product. GLOVES or HAND PROTECTION Protective gloves are recommended when prolonged skin contact cannot be avoided. The gloves listed may provide protection against permeation: neoprene, nitrile, viton. Gloves of other chemically resistant materials may not provide adequate protection. RESPIRATORY PROTECTION Concentration in air determines the level of respiratory protection needed. Use only NIOSH certified respiratory equipment. Respiratory protection is not usually needed unless product is heated or misted. Half-mask air purifying respirator with dust / mist filters or HEPA filter cartridges is acceptable for exposures to ten (10) times the exposure limit. Full-face air purifying respirator with dust / mist filters or HEPA filter cartridges is acceptable for exposures to fifty (50) times the exposure limit. Protection by air purifying respirators is limited. Use a positive pressure-demand full-face supplied air respirator or SCBA for exposures greater than fifty (50) times the exposure limit. If exposure is above the IDLH (Immediately Dangerous to Life and Health) or there is the possibility of an uncontrolled release, or exposure levels are unknown, then use a positive pressure-demand fullface supplied air respirator with escape bottle or SCBA. OTHER Where splashing is possible, fully chemical resistant protective clothing (e.g. acid suit) and boots are recommended for prolonged exposure. Wear insulated impervious protective gear to protect against the splash SN 600; SN 700; SN 750; SN 850; SN500CH; SN 525WB; SN 600SW; SN 600WB; SN 90BS; SN 120BS; SN 145BS; SN 2000BS 3

of product. The following materials are acceptable for use as protective clothing: polyvinyl alcohol (PVA); polyvinyl chloride (PVC); neoprene; nitrile; viton; polyurethane. Remove contaminated clothing and wash before reuse. 9. PHYSICAL AND CHEMICAL PROPERTIES Physical Property Typical* Units Text Result Reference Appearance Clear colored fluid N/A Boiling Range 600-1325 F D2887 Bulk Density 7.3 lb/gal D1250 Pour Point -12 C D97/D5950 Molecular Weight 545+ g/mole D2502 Octanol/Water Coefficient N/A ph N/A Specific Gravity 0.88 60/60F D1298 Solubility in Water Nil wt % Odor slight N/A Odor Threshold ppm Vapor Pressure < 0.0001 mmhg @ 100 F Viscosity (F) See TDS SUS @ 100 F D2161 Viscosity (C) See TDS cst @ 40 C D445 % Volatile Nil wt % D2369 * Refer to TDS (Technical Data Sheet) for specific typical data for each product. 10. STABILITY AND REACTIVITY STABILITY Stable CONDITIONS TO AVOID None identified. INCOMPATIBILITY Strong oxidizers. HAZARDOUS DECOMPOSITION PRODUCTS Combustion may produce carbon monoxide, carbon dioxide and other asphyxiants. HAZARDOUS POLYMERIZATION Will not polymerize. 11. ECOLOGICAL INFORMATION No data available 12. DISPOSAL CONSIDERATIONS SN 600; SN 700; SN 750; SN 850; SN500CH; SN 525WB; SN 600SW; SN 600WB; SN 90BS; SN 120BS; SN 145BS; SN 2000BS 4

Follow federal, state and local regulations. This material is not a RCRA hazardous waste, if not contaminated. If material has been used, RCRA criteria (ignitability, reactivity, corrosivity and toxicity) must be determined. Do not flush material to drain or storm sewer. Contract to authorized disposal service. 13. TRANSPORT INFORMATION Governing Body Mode Proper Shipping Name DOT Ground Petroleum Lubricating Oil Governing Body Mode Hazard Class UN/NA No. Label DOT Ground N/A N/A Not Regulated 14. REGULATORY INFORMATION Regulatory List Component CAS No. Inventory - Australia (AICS) Inventory - Canada - Domestic Substances List Inventory - China Inventory - European EINECS Inventory Inventory - Japan - (ENCS) Inventory - Korea - Existing and Evaluated Inventory - Philippines Inventory (PICCS) Inventory - TSCA - Sect. 8(b) Inventory This product contains residual amounts of toluene, a chemical known to the state of California to cause birth defects or other reproductive harm. Title III Classifications Sections 311, 312: Acute: NO Chronic: NO Fire: NO Reactivity: NO Sudden Release of Pressure: NO 15. OTHER INFORMATION Limits for the product- 5mg/m3, Oil Mist Limit, (OSHA PEL/ACGIH TLV) WHMIS Classification: not controlled. The information and recommendations contained within this document are, to the best of Holly Refining & Marketing Tulsa, LLC s knowledge and belief, accurate and reliable as of the date issued. The information and recommendations are offered for the user s consideration and examination. We extend no warranties and make no representations as to the accuracy or completeness of the information contained herein and assume no responsibility regarding the suitability of this information for the users intended purpose or for the consequence of its use. It is the user s responsibility to satisfy itself that the product is suitable for the intended use and to insure proper health, safety and other necessary information is followed. SN 600; SN 700; SN 750; SN 850; SN500CH; SN 525WB; SN 600SW; SN 600WB; SN 90BS; SN 120BS; SN 145BS; SN 2000BS 5