LISTA DE LUCRĂRI Asist.univ.dr.ing. Ancuţa-Elena TIUC

Similar documents
STUDIES ON STRUCTURAL OPTIMIZATION OF LIGNOCELLULOSES COMPOSITE

Subventionarea Literaturii Tehnico - Stiintifice - Lista cererilor de finanțare depuse - Nr.Crt. CodDepunere Denumirea revista Institutie Domeniu

RESEARCH FOR ESTABLISHING THE OPTIMUM SOIL TILLAGE OF THE PRELUVOSOIL FROM ORADEA

OBTAINING NEW OXIDE COMPOSITE MATERIALS WITH SOUND-ABSORBING PROPERTIES

EXPERIMENTAL RESEARCHES ON THE SOUND ABSORPTION COMPOSITES USED FOR PUBLIC WORKS EQUIPMENT

THE PRODUCTION CAPACITY OF LEACHATE COLECTED FROM PIATRA NEAMT LANDFILL

STUDIES CONCERNING THE SUBSTANCES TRANSFER BETWEEN THE STEELMAKING PHASES

RESEARCHES REGARDING THE MECHANICAL BEHAVIOUR OF SOME POLYMER COMPOSITE STRUCTURES

BALL BEARING SKF BEARINGS MANUFACTURED BY ELECTRICAL EROSION

LISTĂ LUCRĂRI. lect. univ. dr. ing. Patricia-Florina Murzea. The 1st Conf. of the Young Reasearchers, YRC 2010 (CD); 1st YRC 2010 (CD);


DOES FAIR VALUE REPRESENT A CONCERN FOR ROMANIAN RESEARCHERS?

Attenuation of Noise Pollution Produced by Band Conveyors from the Mining Unit of Career Rosia Due to Climatic Conditions

Study on mechanics of bodies under the action of sound pollution in industrial halls. Part I: Setting away from local sources

Glass Fibres Reinforced Polymeric Composites - Statistic Models of Surface Roughness

Lista de lucrări. a) 10 lucrări considerate a fi cele mai relevante

Experimental Results Regarding Lubricant Film Thickness to the Radial Bearing with HD Lubrication

Fișa de îndeplinire a standardelor minimale stabilite de CNATDCU conform Monitorul Oficial nr. 890 bis din 27 decembrie 2012

Lista de lucrări. C) Lucrări ştiinţifice publicate în reviste de specialitate reviste CNCSIS (B+) reviste indexate BDI / ISI Web of Knowledge :

INFLUENCE OF RIB LENGTH ON THE SOLIDIFICATION OF CAST PARTS

THE PRECISION INDEXES ANALYSIS OF TOOTHED GEARS MANUFACTURED BY PLASTIC DEFORMATION

SURVEY OF THE STATE OF THE ART COMPOSITES AND SANDWICH STRUCTURES

Assoc. Prof. Magdalena Simona Fogorasi, PhD

Critical Buckling Force Variation for Beams with Discontinuities

DISTRIBUTION OF FROST CRACKS LENGTH IN RELATION TO COMPASS POINTS AND BIOLOGICAL ORIGIN OF TURKEY OAK WITHIN BOBOSTEA FOREST (COUNTY OF BIHOR)

Forest plantations on the tailing dumps from Moldova Nouă periurban forest

TRIBOLOGICAL INDEX FOR AN ALUMINIUM MATRIX COMPOSITES

RESEARCH REGARDING THE USE OF THE PICHE EVAPORIMETER FOR IRRIGATION SCHEDULING IN CUCUMBER UNDER POLYETILENNE TUNNEL CONDITION

Improving sound absorption property of polyurethane foams doped with natural fiber

EXPERIMENTAL DETERMINATION OF HEAT LOSSES FOR A BURIED TRANSPORT PIPELINE IN NON-ISOTHERMAL STATE

L I S T A lucrărilor ştiinţifice Ş.l. dr. Ing. PERŢA-CRIŞAN Simona

Y SHAPE RAILWAY SLEEPERS FROM FIBER REINFORCED FOAMED URETHANE

THE MODELS OF MAIN EFFECTS OF DIFFERENT PARAMETERS OF LIQUID WOOD SAMPLES

THE POLLUTION PHENOMENON MODELLING OF THE UNDERGROUND WATER

ACTA TECHNICA NAPOCENSIS

EXPERIMENTAL RESEARCH CONCERNING PUNCHED SURFACE QUALITY

LISTA LUCRARILOR PUBLICATE

Stress and Deformation Analysis in Base Isolation Elements Using the Finite Element Method

SOUND ABSORPTION CHARACTERISTICS OF PALM OIL MALE FLOWER SPIKES FIBER REINFORCED COMPOSITE. S.R. Masrol, M.K.R. Rosdin, M.N.

RESEARCHES ON THE GENERATION OF FINE AIR BUBBLES REQUIRED FOR WATER AERATION PROCESSES

Development of Environmental Technology for Carbon Fibre Reinforced Materials Recycling

LISTA LUCRARILOR PUBLICATE

ELASTOMER DESCRIPTIONS

Contents. Preface... xi. 1 History of Cementitious and Polymer Technology and their Unison Introduction References...

CĂRȚI / CAPITOLE DE CĂRȚI

RESEARCH REGARDING ACOUSTICAL PROPERTIES OF RECYCLED COMPOSITES

Welding of Active Diamond Elements on Cutting Disks Using CO2 Laser

FACULTY OF CIVIL ENGINEERING. Eng. Claudiu Aciu. Ph.D. THESIS ECOLOGICAL MATERIALS IN STRUCTURAL AND NON-STRUCTURAL ELEMENTS IN DWELLING BUILDINGS

STUDIES AND RESEARCH WORK ON THE

ANALELE STIINTIFICE ALE UNIVERSITATII ALEXANDRU IOAN CUZA DIN IASI (SERIE NOUA), SECTIUNEA I. BIOLOGIE ANIMALA

ACOUSTIC PERFORMANCE OF GREEN POLYMER FOAM FROM RENEWABLE RESOURCES AFTER UV EXPOSURE

NEW WELDING TECHOLOGY THE COLD WELDING ON COGGED SURFACES

The Economical Risk Evaluation for a Municipal Waste Landfill from where the Heavy Metals are Drained into the Surface Water.

SYLLABUS Academic year

THE INFLUENCE OF THE CROP SYSTEM ON SOIL AND YIELD LOSSES IN THE CONDITIONS OF THE EROSIONED SOILS FROM BIHOR

3d modeling and fem analysis for solar panel mounting system on a house roof

Comparison Criteria and Performance Levels for Soundproofing Panels Made in Different Constructive

Institution. Period Holder/Associate Institution

VIBRATION PERFORMANCE OF LIGHTWEIGHT CONCRETE COATED BIOPOLYMER BASED ON USED COOKING OIL

LISTA DE LUCRĂRI DAN Sorin

curriculum vitae Personal information

SELECTION METHOD FOR AUTOMOTIVE PARTS RECONDITIONING

Scientific Papers of the R.I.F.G. Pitesti, Vol. XXV, 2009

LISTA DE LUCRĂRI. Asistent cercetare dr. Gabriela Emilia POPIȚA A. LISTA COMPLETĂ DE LUCRĂRI. A.1. ARTICOLE COTATE ISI publicate (autor și coautor)

Research Journal of Agricultural Science, 45 (2), Oprea RADU

The Effects of the Immersion Time on the Mechanical Behaviour in Case of the Composite Materials Reinforced with E-glass Woven Fabrics

FACULTY OF INSTALLATIONS. Eng. Ioan Aşchilean. Ph.D. THESIS - ABSTRACT -

Dynamic Impact Test of the Railing with Dissipative Elements

RESEARCH ON DEGRADATION CORROSIVE ENVIRONMENT OF SOME STEELS USED IN MANUFACTURING MINING EQUIPMENT. MECHANICAL TESTS

Sustainability of steel corrosion protection by hot dip galvanizing

Studies on the Influence of Potential and Electrochemical Conditions on Zinc-Nickel Alloys Electrodeposition

THE INFLUENCE OF SOME COMPOSITION FACTORS ON THE BEHAVIOR OF MICRO-CONCRETES SUBJECTED TO MAGNESIAN AGRESSIVITY

Keywords: composite, multi-phase, elastic coefficient, micromechanics, testing

Risk assessment of Herja mine closure by building a retention dam

WATER AND SEAWATER EFFECTS ON THE MEMBERS MADE OF E-GLASS COMPOSITE MATERIALS

REZULTATE SI MODALITĂŢI DE VALORIFICARE A CERCETĂRII ÎN CC MEE Granturi, lucrări, publicaţii

ACTA TECHNICA NAPOCENSIS

SOME MODERN SOLUTIONS FOR FASTENING RAIL SYSTEMS ON ROMANIAN BRIDGES

SURFACE HARDENING OF 40Cr10 STEEL AFTER SHORT TIME NITRIDING IN FLUIDIZED BED

COMPARATIVE ANALYSIS OF PRODUCTION AND PROCESSING OF GLASSWARE AND TECHNICAL GLASS

STUDY OF THE INFLUENCE BELTS JOINT REGIME PARAMETERS FOR IMPROVING THE TIME OF OPERATION OF THE CONVEYOR BELTS

ENVIRONMENTAL CONSTRAINTS IMPOSED ON PLASTIC WASTE OF WEEE DISMANTLING MANAGEMENT

Sound-absorbing and sound-insulating barriers

IMPACT OF CONSTRUCTIONS UPON ENVIRONMENT WITH RESPECT TO EMBODIED ENERGY

EDUCATION THROUGH SIMULATED ENTERPRISE

WASTEWATER TREATMENT PROCESSES DERIVED FROM ELECTROPLATING. Oradea; Romania, ,

Sustainability of New and Strengthened Buildings

The benefits of utilisation computer system for monitoring the movements of excise (EMCS)

, Hradec nad Moravicí ASPECTS CONCERNING FLUIDIZED BED NITRIDING FOR ALLOYING STEEL WITH ALUMINIUM

PERFORMANCES OF THE CONCRETE MASONRY WITH RECYCLED WOOD CHIPS (I)

THE BENEFITS OF UTILISATION COMPUTER SYSTEM FOR MONITORING THE MOVEMENTS OF EXCISE (EMCS)

FINITE ELEMENT ANALYSIS OF SAMPLES INJECTED BY POLYAMIDE 6.6 NATURE

THE MODELLING OF POLLUTION PROCESSES IN THE AREA OF INDUSTRIAL WASTE

BENDING BEHAVIOUR OF NANO-FERRITES MODIFIED EPOXY RESINS

EXPERIMENTAL STUDIES CONCERNING DAMAGE OF TWO LUBRICANT GREASES IN SEVERE WORKING CONDITIONS

OLD MASONRIES REHABILITATION. DAMAGED AND COATED STRUCTURES MADE WITH WEAK MORTARS

INFORMATION AND COMMUNICATION TECHNOLOGY IN THE TRANSPORT & LOGISTICS INDUSTRY

EXPLOITATION OF A CLOSED LANDFILL ACCORDING TO THE PRINCIPLES OF SUSTAINABLE DEVELOPMENT

ASPECTS CONCERNING THE BEHAVIOUR OF ROLLING TRACKS UNDER LIMIT LOADS UDK: Eugen Cefranov

RESEARCH ON WEIGHT EVOLUTION AND DAILY AVERAGE INCREASE TO FOUR DIFFERENT GROUPS OF LITTLE CROSSBREED BULLS EXPOSED TO INTENSIVE FATTENING

Transcription:

UNIVERSITATEA TEHNICĂ DIN CLUJ-NAPOCA Facultatea Ingineria Materialelor şi a Mediului Departamentul Ingineria Mediului şi Antreprenoriatul Dezvoltării Durabile LISTA DE LUCRĂRI Asist.univ.dr.ing. I. Articole relevante 1. Tiuc A.E, Nemeş O., Perhaiţa I., Vermeşan H., Gabor T., Dan V., Thermal Behaviour of Polyurethane Matrix Composite Materials, Studia Universitatis Babeş-Bolyai Seria Chemia, LX, 2, Tom I, pp. 169-176, 2015. 2. Tiuc A.E., Vasile O, Vermeşan H., Acoustic Performance of Composite Materials Made from Textile Waste, Journal of Acoustics and Vibration, Volume XII, issue 2, pp.111-115, 2015. 3. Tiuc A.E., Vasile O., Usca A.D., Gabor T., Vermeşan H., The Analysis of Factors That Influence the Sound Absorption Coefficient of Porous Materials, Journal of Acoustics and Vibration (SCOPUS), Volume XI, issue 2, pp.105-108, 2014. 4. Tiuc A.E., Vasile O., Gabor T., Determination of Antivibrational and Acoustical Properties of Some Materials Made From Recycled Rubber Particles and Sawdust,, Romanian Journal of Acoustics and Vibration, Volume XI, issue 1, pp.47-52, 2014. 5. Tiuc A.E., Moga L., Improvement of Acoustic and Thermal Comfort by Turning Waste into Composite Materials, Romanian Journal of Acoustics and Vibration, Volume X, issue 2, pp.77-82, 2013. 6. Borlea (Tiuc) A., Rusu T., Ionescu S., Nemeş, O., Determination of sound absorption properties of some new composite materials obtained from wastes/determinarea proprietăţilor fonoabsorbante ale unor noi materiale compozite realizate din deşeuri, Revista Română de Materiale/Romanian Journal of Materials, vol.42, nr.4, pp. 405-414, 2012. 7. Borlea (Tiuc) A., Rusu T., Vasile O., Using particles of recycled rubber when making some soundproofing materials, Materiale Plastice, vol. 49, nr.4, pp. 275-278, 2012. 8. Borlea (Tiuc) A., Rusu T., Vasile O., Investigation Composite Materials for its Sound Absorption Properties, Romanian Journal of Acoustics and Vibration, Volume IX, issue 2, pp.123-126, 2012. 9. Borlea (Tiuc) A., Rusu T., Ionescu S., Creţu M., Ionescu A., Acoustical materials Phonoabsorbant materials made of pine sawdust, Romanian Journal of Acoustics and Vibration, Volume VIII, issue 2, pp.95-98, 2011. 1

II. Teza de doctorat Studii şi Cercetări Privind Obţinerea unor Materiale Fonoabsorbante din Deşeuri, septembrie 2012, Universitatea Tehnică din Cluj-Napoca, conducător ştiinţific prof.univ.dr.ing. Tiberiu RUSU. 1. Bratu M, Dumitrescu O., Vasile O., Research on the sound-absorbing properties of new composite materials with some wastes, Romanian Journal of Materials Volume: 44 Issue 2 Pages: 160-168 Published: 2014. III. Brevet de invenţie Tiuc Ancuţa Elena, Rusu Tiberiu, Nemeş Ovidiu, Procedeu de Obţinere a unui Material Compozit Fonoabsorbant, Nr. brevet 129228 B1, clasificare internationala C04B 26/26 (2006.01), 28.08.2015. IV. Cărţi - în Edituri Naţionale 1. Tiuc A.E., Abordări Tematice în Ingineria Dezvoltării Durabile - Aplicaţii, Editura Risoprint, Cluj-Napoca, 2015, ISBN 978-973-53-1711-9. 2. Vermeşan H., Tiuc A.E., Fenomene de Transfer al Poluanților, Editura Risoprint, Cluj- Napoca, 2015, ISBN 978-973-53-1252-7. V. Articole publicate în reviste ştiinţifice Articole publicate în reviste cotate/idexate ISI 1. Tiuc A.E, Nemeş O., Perhaiţa I., Vermeşan H., Gabor T., Dan V., Thermal Behaviour of Polyurethane Matrix Composite Materials, Studia Universitatis Babeş-Bolyai Seria Chemia, LX, 2, Tom I, pp. 169-176, 2015. 2. Rus V., Hegyi A., Vermeşan H., Tiuc A.E, Steel Reinfocement in Fresh Concrete, Studia Universitatis Babeş-Bolyai Seria Chemia, LX, 2, Tom II, pp. 409-419. 2015. 3. Hegyi A., Rus V., Tiuc A.E, Grünwald E., Corrosion behavior of welded hot dip galvanized steel and the influence of the repair of the coating after welding, Korróziós Figyelõ, vol. 54, 2, pp.36-39, 2014. 4. Todea D.A., Tonk S., Tiuc A.E., Török A., Mânzatu C., Katona G., Majdik C., Efficient Degradation of Phenol with Pseudomonas Putida Cells for the Production of Pure Water, Studia Universitatis Babeş-Bolyai Chemia, Vol.58, issue 3, pp.125-134, 2013. 5. Todea D.A., Tonk S., Tiuc A.E., Török A., Mânzatu C., Katona G., Majdik C., Continuous Flow Waste Water Purification With Immobilized Cells, Studia Universitatis Babeş-Bolyai Chemia, Vol.58, issue 3, pp.135-142, 2013. 2

6. Borlea (Tiuc) A., Rusu T., Ionescu S., Nemeş, O., Determination of sound absorption properties of some new composite materials obtained from wastes/determinarea proprietăţilor fonoabsorbante ale unor noi materiale compozite realizate din deşeuri, Revista Română de Materiale/Romanian Journal of Materials, vol.42, nr.4, pp. 405-414, 2012. Citări 1. Yilmaz ND, Powell NB, Green Biorenewable Biocomposites From Knowledge to Industrial Applications: Biocomposite Structures As Sound Absorber Materials, Apple Academics, USA, 2015. 2. Iurian AM, Perhaiţa I, Şeptelean R, Saponar A, Wood Fibers Characterization By Tga Analysis, Studia Universitatis Babeş-Bolyai Seria Chemia, Volume: LVIII Issue: 1 Pages: 141 149 Published: 2013. 7. Borlea (Tiuc) A., Rusu T., Vasile O., Using particles of recycled rubber when making some soundproofing materials, Materiale Plastice, vol. 49, nr.4, pp. 275-278, 2012. Citări 1. Nasir MRJ, Zulkepli NN, Abdullah MMA, Omar MF, Ismail H, Sandu AV, The Effects of Different Particle Sizes of Recycled Acrylonitrile Butadiene Rubber and its Blend Ratios on Mechanical and Morphological Properties of vnbr/rnbr Blends, Materiale Plastice Volume: 51 Issue: 2 Pages: 201-204 Published: 2014. 2. Buruiana DL, Bordei M, Sandu IG, Chirculescu AI, Sandu I, Recycling Waste Grit in Mix Asphalt, Materiale Plastice Volume: 50 Issue: 1 Pages: 36-39 Published: 2013. 3. Buruiana DL, Bordei M, Sandu IG, Chirculescu AI, Sandu I, Andreea Irina Chirculescu, Ion Sandu, Studies on Grit Use in Asphalt Mixtures (II), Materiale Plastice Volume: 50 Issue: 2 Pages: 113-118 Published: 2013. Articole publicate în reviste indexate ISI/ISI proceedings acceptate spre publicare 1. Tiuc A.E., Vermeşan H., Gabor T., Vasile O., Improved sound absorption properties of polyurethane foam mixed with textile waste, Energy Procedia, Elsevier, DOI information: 10.1016/j.egypro.2015.12.245 2. Tiuc A.E., Dan V., Vermeşan H., Gabor T., Proorocu M., Recovery Of Sawdust And Particles Of Recycled Rubber By Making Them Into Sound Absorbing Materials, Environmental Engineering and Management Journal. 3. Gabor T., Dan V., Tiuc A.E.,. Sur I.M, Badila I.N., Modeling and simulation of heat transfer processes for heat exchangers with heat pipes used for recovering heat from wastewater, Environmental Engineering and Management Journal. Articole publicate în reviste indexate BDI 1. Tiuc A.E., Vasile O, Vermeşan H., Acoustic Performance of Composite Materials Made from Textile Waste, Journal of Acoustics and Vibration, Volume XII, issue 2, pp.111-115, 2015. 3

2. Tiuc A.E., Vermeşan H., Gabor T., Superior Recovery Of Non-Metallic Waste By Making Sound Absorbing Materials, Acta Technica Napocensis, Series: Environmental Engineering and Sustainable Development Entrepreneurship, Cluj-Napoca, vol. 4, nr.2, pp. 35-42, 2015. 3. Tiuc A.E., Vasile O., Usca A.D., Gabor T., Vermeşan H., The Analysis of Factors That Influence the Sound Absorption Coefficient of Porous Materials, Journal of Acoustics and Vibration (SCOPUS), Volume XI, issue 2, 2014, pp.105-108. 4. Tiuc A.E., Vasile O., Gabor T., Determination of Antivibrational and Acoustical Properties of Some Materials Made From Recycled Rubber Particles and Sawdust,, Romanian Journal of Acoustics and Vibration, Volume XI, issue 1, pp.47-52, 2014. 1. Iaşnicu (Stamate) I, Vasile O., Iatan R, Sound Absorption Analysis For Layered Composite Made From Textile Waste And Cork, SISOM 2015 and Session of the Commission of Acoustics, Bucharest 21-22 May 2015 pp. 292-299. 2. Iaşnicu (Stamate) I, Vasile O., Iatan R., Tomescu G., Determination Of Sound Absorption Coefficient For Plates And Layered Composite Material Made From Textile Waste And Cork, Journal of Engineering Studies and Research Volume 21, Issue 2, Pages: 48-56 Published:2015. 5. Gabor T., Dan V., Tiuc A.E., Bădilă I.N., Analysis on heat pipes used to recover secondary resources, ECOTERRA, Journal of Environmental Research and Protection, vol 11, no 4, 2014. 6. Tiuc A.E., Moga L., Improvement of Acoustic and Thermal Comfort by Turning Waste into Composite Materials, Romanian Journal of Acoustics and Vibration, Volume X, issue 2, pp.77-82, 2013. 1. Mohsin AI, Fahad BM, Improve the Acoustic Impedance and Thermal Conductivity of Mortar by Adding Recycled Rubber, International Journal Of Modern Engineering Research (IJMER), Volume 5, Issue 4, Pages 9-16, Published: 2015. 7. Tiuc A.E., Rusu T., Vasile O., The influence of perforations from the surface of a sound absorbing material on the sound absorption coefficient, Romanian Journal of Acoustics and Vibration, Volume X, issue 1, pp.59-62, 2013. 1. Memon H., Abro Z.A., Ahmed A., Khoso N.A., Considerations while designing Acoustic Home Textiles: A Review, Journal Of textile and Apparel, Technology and Management (JTATM), Volume 9, Issue 3, Pages 1-29, Published: 2015. 8. Borlea (Tiuc) A., Rusu T., Vasile O., Investigation Composite Materials for its Sound Absorption Properties, Romanian Journal of Acoustics and Vibration, Volume IX, issue 2, pp.123-126, 2012. Citări 1. Krucińska I, Gliścińska E, Michalak M, Ciechańska D, Kazimierczak J, Bloda A, Sound-absorbing green composites based on cellulose ultra-short/ultra-fine fibers, Textile Research Journal, Volume 85, Issue 6, Pages 646-657, Published: 2015. 4

2. Augustine Steven Christopher, Sound Attenuation Performance of Fiberreinforced Polymer Composite Circumaural Hearing Protection Devices, Graduate Theses and Dissertations, University of South Florida, 2015. 3. Gliścińska E, Michalak M, Krucińska I, The influence of surface asymmetry of thermoplastic composites on their sound absorption, Composites Theory and Practice Volume: 14 Issue: 3 Pages: 150-154 Published: 2014. 4. Gliścińska E, Michalak M, Krucińska I,, Kazimierczak J, Bloda A, Ciechańska D, Sound Absorbing Composites from Nonwoven and Cellulose Submicrofibres, Journal of Chemistry and Chemical Engineering, Volume: 7 Pages: 942-948 Published: 2013. 9. Borlea (Tiuc) A., Rusu T., Ionescu S., Research on obtaining soundproof materials from wastes, Acta Technica Napocensis, Series: Environmental Engineering and Sustainable Development Entrepreneurship, Cluj-Napoca, vol. 1, nr.3, pp. 13-20, 2012. 10. Borlea (Tiuc) A., Rusu T., Vasile O., Gheorghe A., Determination of antivibratil properties of some materials made from wastes, Acta Technica Napocensis, Series: Applied Mathematics and Mechanics, vol. 55, Issue II, pp. 373-378, 2012. 11. Borlea (Tiuc) A., Rusu T., Ionescu S., Creţu M., Ionescu A., Acoustical materials Phonoabsorbant materials made of pine sawdust, Romanian Journal of Acoustics and Vibration, Volume VIII, issue 2, pp.95-98, 2011. Citări 1. Memon H., Abro Z.A., Ahmed A., Khoso N.A., Considerations while designing Acoustic Home Textiles: A Review, Journal Of textile and Apparel, Technology and Management (JTATM), Volume 9, Issue 3, Pages 1-29, Published: 2015. 2. Jayamani E, Hamdan S, Heng S K, Rahman M R, Sound Absorption Property of Agricultural Lignocellulsic Residue Fiber Reinforced Polymer Matrix Composites, Applied Mechanics and Materials Volume: 663 Pages: 464-468 Published: 2014. 3. Kamal M, Rahman MM, Fatigue life estimation models: a state of the art, International Journal of Automotive and Mechanical Engineering (IJAME)Volume: 9 Pages: 1599-1608 Published: 2014. 4. Rus Anika Zafiah M., Bainun Akmal M. A., Mat Hassan N.N., Influence of High Doping of TiO2 of Polymeric Foam for Acoustic Study, Key Engineering Materials Volume: 594-595 Pages: 755-759 Published: 2014. 5. Mat Hassan N.N., Rus Anika Zafiah M., Acoustic performance of green polymer foam from renewable resources after uv exposure, International Journal of Automotive & Mechanical Engineering Volume: 9 Pages: 1639 Published: 2014. 6. Mohd Atan Bainun Akmal, Influence of UV irradiated on high doping TiO2 of polymer foam for acoustic study. Masters thesis, Universiti Tun Hussein Onn Malaysia, 2014. 7. Ab Latif Najibah, Vibration damping characteristic and sound absorption of biopolymer from waste cooking oil. Masters thesis, Universiti Tun Hussein Onn Malaysia, 2014. 5

12. Borlea (Tiuc) A., Rusu T., Şimon (Niste) S., Theoretical considerations on sound absorption, Analele Universităţii Constantin Brâncuşi Seria Inginerie nr.2, pp.89-97, 2011. 13. Borlea (Tiuc) A., Rusu T., Şimon (Niste) S., The use of soundproofing materials for noise reduction, Analele Universitatii Constantin Brâncuşi Seria Inginerie nr.3, pp.387-397, 2010. 14. Borlea (Tiuc) A., Rusu T., Şimon (Niste) S., Necessity of today: Noise Reduction, Buletinul Stiintific al Universitatii de Nord, SERIA D Exploatări Miniere Prepararea Substanţelor Minerale Utile Metalurgie Neferoasă Geologie şi Ingineria Mediului, vol.xxiv nr.1, pp.71-80, 2010. 15. Borlea (Tiuc) A., Rusu T., Poluarea sonoră şi reducerea ei, Ştiinţă şi Inginerie, An X, vol.17, pp.585-590, 2010. 16. Şimon (Niste) S., Rusu T., Borlea (Tiuc) A., Efect of ph and temperature of enzymes on biological wastewater treatament, Analele Universităţii Constantin Brâncuşi Seria Inginerie nr.2, pp.226-231, 2011. 17. Şimon (Niste) S., Rusu T., Borlea (Tiuc) A., Enzymatic mixture and the role in the environment protection, Buletinul Stiintific al Universitatii de Nord, SERIA D Exploatări Miniere Prepararea Substanţelor Minerale Utile Metalurgie Neferoasă Geologie şi Ingineria mediului, vol. xxv nr.1, pp.99-104, 2011. 18. Şimon (Niste) S., Rusu T., Borlea (Tiuc) A., Biological wastewater treatment processes efficiency whit using of polienzymatics mixtures, Analele Universităţii Constantin Brâncuşi Seria Inginerie nr.3, pp.523-531, 2010. VI. Publicaţii în extenso apărute în lucrări ale conferinţelor 1. Tiuc A.E, Rusu T., Vasile O., Influenţa perforaţiilor de pe suprafaţa unui material fonoabsorbant asupra coeficientului de absorbţie acustică, A 37-a Conferinţa Internaţională de Mecanica Solidelor, Acustică şi Vibraţii, CNMSAV XXXVII, Vol.I, pp.66-70, Chişinău 2013. 2. Tiuc A.E, Zgomotul şi consecinţele sale în contextul dezvoltării durabile, Antreprenoriat, mediu de afaceri si dezvoltare durabila AMDD, Casa Cartii de Ştiinţă pp.105-118, Cluj- Napoca, 2013. 3. Borlea (Tiuc) A., Rusu T., Vasile O., Gheorghe A., Soundproofing materials whit recycled rubber particles and sawdust, Proceedings of SISOM & ACOUSTICS, Annual Symposium of the Institute of Solid Mechanics (SISOM) and Symposium of Acoustics, Bucureşti, România, 30-31 mai 2012, pp. 291 296, http://www.imsar.ro/sisom%20_papers_2012/a09.pdf 4. Borlea (Tiuc) A., Rusu T., Ionescu S., Realizarea unor placi fonoabsorbante din materiale reciclate, Antreprenoriat, mediu de afaceri si dezvoltare durabila AMDD, Casa Cartii de Stiinta, pp.285-290, Cluj-Napoca, 2012. 5. Borlea (Tiuc) A., Rusu T., Şimon (Niste) S., Opportunities for wood waste recycling by obtaining of new composite materials, Brochure of the Conference 17th Building Services, Mechanical and Building Industry Days, 13 October 2011, Debrecen, Hungary. 6

6. Gheorghe A., Borlea (Tiuc) A., Evaluation of absorbing performance for composite plates made from recycled waste, Proceedings of SISOM & ACOUSTICS, Annual Symposium of the Institute of Solid Mechanics (SISOM) and Symposium of Acoustics, Bucureşti, România, 30-31 mai 2012, pp. 307 313, http://www.imsar.ro/sisom%20_papers_2012/a13.pdf. 1. Iaşnicu (Stamate) I, Vasile O., Iatan R, Sound Absorption Analysis For Layered Composite Made From Textile Waste And Cork, SISOM 2015 and Session of the Commission of Acoustics, Bucharest 21-22 May 2015 pp. 292-299. 2. Iaşnicu (Stamate) I, Vasile O., Iatan R., Tomescu G., Determination Of Sound Absorption Coefficient For Plates And Layered Composite Material Made From Textile Waste And Cork, Journal of Engineering Studies and Research Volume 21, Issue 2, Pages: 48-56 Published:2015. 7. Şimon (Niste) S., Rusu T., Borlea (Tiuc) A., Remediating Phenolic Wastewaters Using Enzymes, Brochure of the Conference 17th Building Services, Mechanical and Building Industry Days, 2011, Debrecen, Hungary. VII. Lucrări de laborator format electronic 1. Disciplina Gestiunea integrată a deşeurilor (7 lucrări de laborator format electronic). VIII. Participare la conferinţe 1. Tiuc A.E., Vermeşan H., Gabor T., Vasile O., Improved sound absorption properties of polyurethane foam mixed with textile waste, International Conference on,,sustainale Solutions for Energy and Environment EENVIRO - YRC 2015 18-20 November 2015, Bucharest ISI proceedings 2. Tiuc A.E, Consideraţii asupra oportunităţilor antreprenoriale cu privire la valorificarea superioară a deşeurilor lemnoase prin realizarea de materiale fonoabsorbante, Conferinţa Antreprenoriat, mediu de afaceri şi dezvoltare durabila (AMDD), 19 20 noiembrie, Cluj-Napoca, 2015. 3. Tiuc A.E, Vasile O, Vermeşan H., Acoustic Performance of Composite Materials Made from Textile Waste, 39th International Conference on Mechanics of Solids, Acoustics and Vibrations, 24-26 septembrie 2015, Reşiţa, România. 4. Tiuc A.E, Vasile O, Usca A.D, The Analysis of Factors That Influence the Sound Absorption Coefficient of Porous Materials, 38th International Conference on Mechanics of Solids, Acoustics and Vibrations ICMSAV XXXVIII, 3-5 septembrie 2014, Piteşti, România. 5. Tiuc A.E, Zgomotul şi consecinţele sale în contextul dezvoltării durabile, Conferinţa Antreprenoriat, mediu de afaceri şi dezvoltare durabila (AMDD), 4 5 iulie, Cluj- Napoca, 2013. 6. Tiuc A.E, Rusu T., Vasile O, Influenţa perforaţiilor de pe suprafaţa unui material fonoabsorbant asupra coeficientului de absorbţie acustică, A 37-a Conferinţa Internaţională de Mecanica Solidelor, Acustică şi Vibraţii, CNMSAV XXXVII, 6-8 Iunie 2013, Republica Moldova, Chişinău. 7

7. Tiuc A.E, Ligia Moga, Improvement of Acoustic and Thermal Comfort by Turning Waste into Composite Materials, EENVIRO Conference on,,sustainale Solutions for Energy and Environment, 19-20 septembrie 2013, Bucuresti. 8. Borlea (Tiuc) A., Rusu T., Vasile O., Investigation Composite Materials for its Sound Absorption Properties, 36 th Interbational Conference on Mechanics of Solids, Acoustics and Vibdations ICMSAV XXXVI, octomber 25-26, Cluj-Napoca, 2012. 9. Borlea (Tiuc) A., Rusu T., Ionescu S., Realizarea unor placi fonoabsorbante din materiale reciclate, Conferinţa Antreprenoriat, mediu de afaceri şi dezvoltare durabila (AMDD), 2 3 iulie, Cluj-Napoca, 2012. 10. Borlea (Tiuc) A., Rusu T., Vasile O., Gheorghe A., Soundproofing materials whit recycled rubber particles and sawdust, Annual Symposium of the Institute of Solid Mechanics (SISOM) and Symposium of Acoustics, Bucureşti, România, 30-31 mai 2012. 11. Borlea (Tiuc) A., Rusu T., Şimon (Niste) S., Opportunities for wood waste recycling by obtaining of new composite materials, 17th Building Services, Mechanical and Building Industry Days, Debrecen, Hungary, 13-14 October 2011. 12. Borlea (Tiuc) A., Rusu T., Ionescu S., Creţu M., Ionescu A., Acoustical materials Phonoabsorbant materials made of pine sawdust, The 10 th International Conference Acoustics.Vibration, Petroşani, România, 29-30 septembrie 2011. 13. Borlea (Tiuc) A., Rusu T., Şimon (Niste) S., Theoretical considerations on sound absorption, International Scientific Conference PRogress, INnovation, DEmocracy HORIZON 2025, Second edition Târgu -Jiu, România 3 4 iunie 2011. 14. Borlea (Tiuc) A., Rusu T., Şimon (Niste) S., Necessity of today:noise Reduction, International Conference Mineral Resources and Environment, Baia Mare, România, 28-30 octombrie, 2010. 15. Borlea (Tiuc) A., Rusu T., Şimon (Niste) S., The use of soundproofing materials for noise reduction, National scientific conference with international participation CONFERENG 2010, Târgu-Jiu, România, 5-6 noiembrie 2010. Data: 06.01.2016 Asist.univ.dr.ing. 8