Epoxy Moisture Vapor Reduction / Mitigation for Flooring. April 2015

Similar documents
ANCAMINE 2423 Curing Agent

AIA / CES. Seminar Overview. Below-Slab Moisture Protection. Presented by: Kyle T. Clemens, CSI, CDT. Problem: Cause: Solution:

ADVANCED PROTECTIVE COATING SYSTEM Breakthrough Protective Top Coat and High Performance Epoxy Primer

ARDEX GUIDE SPECIFICATION ARDEX MC RAPID One-Coat Moisture Control System For Concrete to Receive ARDEX ARDIFLO Pump System Underlayments

EPODIL LV5 Hydrocarbon Resin

Section SECTION RESINOUS FLOORING PART 1 - GENERAL 1.1 RELATED DOCUMENTS

NextGen Epoxy WB Epoxy System (EPI-REZ Resin 7520-WD-52 and Research Curing Agent RSC-4431)

KOSTER AMERICAN CORPORATION

SECTION SUBSURFACE PREPARATION FOR FLOOR FINISHES

ARDEX GUIDE SPECIFICATION ARDEX MC RAPID One-Coat Moisture Control System For Concrete to Receive ARDEX Underlayments and Toppings

Innovative Amine Curing agent for Epoxy Resins New Water-reducible Curing Agent for Civil Engineering g & Concrete Coatings

5995 Greenwood Plaza Blvd. Suite 100 Greenwood Village, CO (fax) As Requested Review and Comment

Vapor-Clear. The high-performance, low-cost, eco-friendly, aesthetically-pleasing alternative to high-build epoxy floors and boring

FOOD & BEVERAGE PROCESSING. High Performance Flooring Systems for Food & Beverage Processing Facilities

FLEXMAR 3-Coat High-Build Colored Quartz System

System Specification CEM-DYE 250 SYSTEM Division 9 Finishes Section Staining and Transparent Finish

FLOORING INSTALLATION SYSTEMS. Product Catalog

ANQUAMINE 287 Waterborne Curing Agent

System Specification CEM-DYE 25 SYSTEM Division 9 Finishes Section Staining and Transparent Finish

Property Test Method Typical Value

Vapor Barriers Under Concrete Slabs Guidance for Selection and Location

WATER-VAPOR PERMEABILITY or MATCHED!BARRIER MATERIALS AS YIELDED 13.1' TWO METHODS. September vricultur E ROOM,

SECTION TOPICAL MOISTURE VAPOR MITIGATION SYSTEM

ARDEX GUIDE SPECIFICATION ARDEX MC RAPID One-Coat Moisture Control System For Concrete to Receive ARDEX Products

MVC Moisture Vapor Control FOR NEW CONSTRUCTION AND REMEDIATION OF EXISTING FLOORS

Waterborne Epoxy Curatives. High performance. Low emissions. Cost-effective.

Tennant Company October North Lilac Drive Minneapolis, Minnesota Guide Specification

NU-AGE FILMS WHITE PAPER

Advantages: Advantages include:

1.2 SUMMERY A. Section Includes: 1. High-Performance Polyurethane Resinous flooring systems. 2. Decorative Polyurethane Resinous flooring systems.

Acceptable Floor Substrates: Concrete, cured mortar bed, plywood, and backer board.

1. CMP SPECIALTY PRODUCTS 210 calcium aluminate/portland cement based self-leveling underlayment and topping

NORTH AMERICA EPOXY CURING AGENTS EPOXY

SECTION Rubber Tile Flooring

A. This section includes pre-finished Higuera Hardwoods bamboo flooring and accessories for floors and stairs.

SECTION SHEET MEMBRANE WATERPROOFING AND CRACK ISOLATION

SECTION TERRAZZO FLOOR TILE

Epoxy Curing Agents and Modifiers

SECTION RESINOUS FLOORING PLEXIQUARTZ BROADCAST SKID-RESISTANT QUARTZ SYSTEM

RESINOUS FLOORING

SECTION EPOXY TERRAZZO TILE WITH RECYCLED GLASS MATRIX

Soy-PK: Bio Based Resin

Decorative, Dynamic Resinous Flooring Systems Combining Warehouse Strength and Exquisite Beauty

SPECIFICATIONS ADVANTAGES. For more information on this product or to order samples call or visit our website at builddirect.

Resilient Flooring Installation Solutions

Coating Types. Coating Systems. Coating Basics. Why coatings are used Component of coatings Methods of protection Service environment

1/16 Single Broadcast Polymer Flooring System

SECTION EPOXY TERRAZZO

Imagine a product which. waterproof your surface, saves. paint cost, protect the structure. from ageing and remain on the. surface forever...

SECTION WOOD FLOORING. 1. Section Above-Grade Vapor Retarders. 2. Section Below-Grade Vapor Retarders

AIR BARRIER SYSTEMS VAPOR-PERMEABLE AND NON-PERMEABLE. Sealed, Smart, and Sustainable WATERPROOFING & BUILDING PRODUCTS COMMERCIAL PRODUCT

ANCAMINE 2802 Curing Agent

May 8, 2017 ADDENDUM #1. IFB Resin Floor System For Highway Department Central District Building

SECTION RESINOUS FLOORING or SECTION QUARTZ FLOORING

Traffic Bearing Membrane

This program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or

DUR-A-FLEX, Inc. Page 1 of 5

FLOORING TREATMENT

900HA is a two component, hand-applied seamless liquid waterproofing that is typically foottrafficable

Industrial and Decorative Epoxy Coating Systems

Desco Quartz Cremona Specifications

Specification and Installation

BELOW GRADE ASSEMBLIES AND RIGID INSULATION

What are Polyaspartics?

GUIDE SPECIFICATION SECTION 07576

ANCAMINE 2726 Curing Agent

SECTION EPOXY MOSAIC COMPOSITION FLOORING Dex-O-Tex Cheminert Terracolor

Installation Instructions

WINNER. USGBC Best of Building Awards

CeRam-Kote Products by Freecom, Inc.

Advance NG (6mm) Technical Specification Sheet

SECTION and/or Resilient Sheet Flooring and/or Resilient Tile Flooring

DUR-A-FLEX, Inc. Page 1 of 6

EPOTUF Product Code: Aliphatic Amidoamine Curing Agent

HEALTHCARE. High Performance Flooring Systems for Healthcare Services

EPOTUF Product Code: Aliphatic Amidoamine Curing Agent

Resilient and Wood Floor Covering Flatness Requires High Performance, Cementitious Self-Leveling Underlayment

Chapter 2. Basic practices. Topics. 7 Basic practices. Notes. 2.5 Existing flooring and adhesive residue Job site conditions 8

1.1 Related Work Specified in Other Sections (Delete if Not Applicable):

A. Section includes hydraulic-cement-based, polymer-modified, self-leveling underlayment for application below interior floor coverings.

2/13/2015. Abstract. Abstract. Addressing Moisture in Concrete for Roofing and Flooring Applications

Sport Impact (10mm) Technical Specification Sheet

BUILDING ENVELOPE PRODUCTS PROVIDING A FULL BUILDING ENVELOPE SYSTEM. Control Moisture Movement with Our Patented Technology

SECTION WOOD FLOORING

Protecting flooring installations from the ground up. LEED Guide

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

ANCAMIDE 351A Curing Agent

Harmoni (3 mm) Technical Specification Sheet

SECTION RESINOUS FLOORING

Specification and Installation

Desco Granite Flooring Specifications

ANCAMINE 2726 Curing Agent

ANCAMIDE 2634 Curing Agent

Features. Specifications. VersaShield MBX slashes up to half the total cost with a quick and effective concrete moisture mitigation up to 99.5% RH.

Capillary Rise. Wicking upward from footing / foundation Beware connecting wet soil to moisture sensitive materials via foundations

SECTION HYDRAULIC CEMENT UNDERLAYMENT

SECTION HYDRAULIC CEMENT UNDERLAYMENT

STERI-SOFT HIGH FOOT TRAFFIC, ULTRAVIOLET RESISTANT, URETHANE RESILIENT FLOORING SYSTEM, 1/8 GREEN BUILDING FEATURES TYPICAL APPLICATIONS

QT 4003 (3mm), QT 4005 (5mm) & QT 4010 (10mm)

ANQUAMINE 721 Curing Agent

Transcription:

Epoxy Moisture Vapor Reduction / Mitigation for Flooring April 2015

Agenda Overview of Ancamine 2739 curing agent What s a perm? Why moisture vapor barriers Performance testing Certifications Summary 2

Ancamine 2739 Curing Agent Overview Properties Ancamine 2739 Color (Gardner) < 3 Viscosity (cps) 350-650 AHEW 95 PHR 45-50 Gel Time 80 Early Water spot resistance (5=best), 25/10C 5/5 Outstanding blush and early water resistance more forgiving and predictable for the flooring applicator Excellent mechanical properties Resists creep for long lasting performance and durability Long pot life with good cure speed Good ease of use for the applicator, with faster return to service than typical std cyclos Emission-free technology minimize facility owner odor complaints, meets the most stringent emission regulations Good UV resistance minimize facility owner perception of color change 3

What s new? Ancamine 2739 curing agent is a fantastic moisture vapor barrier product - Moisture Vapor Barrier Primer Application to Concrete CTL certified (ASTM F3010) - Indoor Air Quality Primer and topcoat applications LEED v4 Compliant (AgBB Compliant) Very low emissions - alkyl phenol free 4

What is a perm? Moisture permeability is a material s ability to allow water vapor to pass through it. It is measured in perms, or permeance (ASTM E-96) - The perm in US measurement is defined as 1 grain of water vapor per hour, per square foot, per inch of mercury Concrete moisture on the job site can be measured either by Calcium Chloride testing (ASTM F-1869) or a Relative Humidity Probe (ASTM 2170) 5

Why use a moisture vapor barrier? Moisture sources exist and permeation through concrete will happen (can happen over days to months) - Free water within the concrete - Water from under the slab The cost of damage to flooring is high applicators have to remove entire floor and rebuild - Seamless Flooring (ex. broadcast, terrazzo etc.) - Floor coverings (ex. tiles, carpet, laminate etc.) The potential personnel exposure and illness associated with mold and mildew 6

Interest in MVB s is increasing Change in industry - Moving away from doing Calcium Chloride and Relative Humidity testing - Promotion of new Moisture vapor mitigation system that meets the ASTM F-3010 Standard - Direct application of MVB to concrete - Architects specifying these products in new construction jobs 7

Comparative performance of Ancamine 2739 and a commercial system Commercial epoxy MVR system Ancamine 2739* Curing agent Viscosity @25 C (cps) 400-700 350 Mix Viscosity @25 C; (cps) 600-1200 500 Gel Time, 150g mass @ 25 C ; (min) 20-35 75 Thin film set time, phase 3 (hr) 6-12 11** Adhesion to wet concrete; 7D cure @ 23 C (ASTM D7234) Permeance @ 16mils; (grains/hr/ft 2 /in.hg) ASTM E96 wet method 200-300psi Coating and concrete failure 300 psi Bulk concrete failure 0.085 0.11 Perms 0.064 Perms * Resin side : LER (BADGE) / Epodil 749 / Epodil 748; (80:10:10) ** Faster cure speed curing agent prototype available 8

Adhesion performance to damp/wet concrete (ASTM D7234) Commercial System Ancamine 2739 Coating and concrete failure Bulk concrete failure 9

Certifications ASTM F3010 certification - Means that MVB meets the < 0.1 perms Follow best practices and guidelines for surface preparation and installation LEED v4 compliance - Leadership in Energy and Environmental Design - Means that Part of the Green Building certification system Low emitting materials credit - meets VOC/emissions criteria 10 - Important to Specifiers, architects, building owners and applicators who are looking to protect expensive flooring by using an MVB underneath - Important to: Specifiers, architects and building owners who want to participate in LEED

Summary Ancamine 2739 is a fantastic moisture vapor barrier product - Low moisture transmission - Great adhesion - ASTM F3010 certification - LEED v4 compliant, very low emissions Ancamine 2739 is a commercial product - Regulatory: On TSCA Not on DSL - Starting point formulations available - Pricing available from you Air Products Account Manager or Distributor Representative 11