JOINT RESTRAINT PRODUCTS & ACCESSORIES February 02, 2014 FOR DUCTILE IRON PIPE ONLY Corporate Office Houston Distribution Center Greater Atlanta Distribution Center 1460 Livingston Avenue, Bldg 300 8730 Ley Road 9121 City Pond Road North Brunswick, NJ 08902 Houston, TX 77028 Convington, GA 30014 Ph: 732 745 7900, Ph: 713 633 1063, Ph: 770 787 2020, Fax: 732 745 7903 Fax: 713 633 1896 Fax: 770 787 2023 Toll Free: 888 506 6217 Toll Free: 855 622 4746 Toll Free: 855 767 2020
Toll Free : 888-506-6217 Fax : 732-745-7903 TERMS, CONDITIONS AND GUIDELINES OF SALES 1. All orders are subject to approval and acceptance by NACIP, Inc. 2. Prices are subject to change without notice, due to market scarp iron and iron fluctuations. 3. All sales are F.O.B. Shipping Point. Any damage or shortage must be noted on the delivery bill of lading or our packing list and acknowledged by the delivering carrier s agent. All Claims for damage shortage must be made in writing within 7 seven days of receipt of material, no exceptions. 4. NACIP, Inc. will make all efforts to make delivery within the time specified. Any delay in meeting shipping schedules will not make NACIP, Inc. liable for any damages of any kind, liquidated or un-liquidated, including damages for loss of use. 5. NACIP, Inc. gives warranty for material furnished under its trade names NACIP, Inc. against any defects in material or workmanship suject to normal use, for a period of 1 one year after date of shipment. NACIP, Inc. will replace said defective product at the delivery point or, at its option credit the price paid for the product plus any transportation charges paid by Buyer in addition to such price. NACIP, Inc. is not responsible for consequential or incidental damages for loss of use, or any other damages whatsoever, in connection with the warranties set forth above or implied by law, or any negligence of or by NACIP, Inc. No terms or conditions, other than those stated above, and no agreement or understanding, oral or written, in any way purporting to modify these terms or conditions, whether contained in Buyer s purchase orders or shipping release forms, or elsewhere, shall be binding to or on NACIP, Inc. unless here after made in writing and signed by NACIP, Inc. authorized representative. 6. All sales, use, excise, state, local or similar taxes are the responsibility of the Buyer. In the event NACIP, Inc. must pay or collect such taxes, the Buyer agrees to promptly reimburse the same to NACIP, Inc. 7. All invoices are payable in net 30 days, unless other terms are explicitly mentioned in the invoices. A service charge shall be added to all past due accounts. 8. Buyer may not return or cancel any part or all of the order without prior written authorization. There will be a minimum restocking charge of 25% for goods agreed upon for return. 9. Buyer will furnish and pay for necessary labor to unload and store material. 10. Please use NACIP, Inc. product item numbering system on all your orders or inquiries by phone, email or fax to facilitate quicker processing of your orders. 11. Please try to order in NACIP, Inc. standard crate quantities, whenever possible, to facilitate quicker processing of your orders. 12. NACIP, Inc. is constantly adding different items and sizes to its on-hand inventory, for immediate delivery. Please check with us for the update in availability when you put your list together the items you are looking for may already be here. 13. The minimum order for freight is 5,000 lbs. for fittings, with or without accessories and Joint Restraint. Manhole covers and valve boxes are not covered by this minimum freight.
Page Intentionally Left Blank
NACIP,Inc. NACIPGRIP Mechanical Joint Restraint for Ductile Iron Pipe Patent # US 6,739,631 B2 Mechanical Joint, Wedge Action Restraint for use on all classes of Ductile Iron Pipe NACIPGRIP Mechanical Joint Restraint for Ductile Iron Pipe Packaged With Accessories Packaged with standard MJ gasket and low alloy steel T-bolts, both of which meet the requirements of ANSI/AWWA C111/A21.11 Please Call for custom packaging with longer bolts, Blue bolts and nuts or with zinc anode nuts Bolts and gaskets are boxed separately from the restraint in the 14 inch and larger sizes. Listed by Underwriters Laboratories, 3" through 24" NGDP03 3 $36.00 7 200 NGDP04 4 $38.25 9 200 NGDP06 6 $45.00 13 100 NGDP08 8 $67.75 17 100 NGDP10 10 $100.25 23 50 NGDP12 12 $146.00 31 50 NGDP14 14 $186.75 54 20 NGDP16 16 $266.75 60 20 NGDP18 18 $377.75 69 10 NGDP20 20 $469.25 72 10 NGDP24 24 $651.25 120 10 NGDP30 30 $1,489.50 197 8 NGDP36 36 $1,906.50 242 8 NGDPPK03 3 $54.75 10 NGDPPK04 4 $59.50 12 NGDPPK06 6 $73.50 18 NGDPPK08 8 $100.25 22 NGDPPK10 10 $142.75 30 NGDPPK12 12 $191.75 39 NGDPPK14 14 $245.50 64 NGDPPK16 16 $331.25 71 NGDPPK18 18 $448.00 80 NGDPPK20 20 $546.75 84 NGDPPK24 24 $741.00 135 NGDPPK30 30 $1,698.00 241 NGDPPK36 36 $2,155.75 295 PLEASE CALL : FOR ANY SPECIAL COATING Toll Free : 888 506-6217 Fax : 732 745-7903
PVC NACIPGRIP Mechanical Joint Restraint for C900/C905/IPS PVC Pipe Patent # US 6,739,631 B2 NGPVC03 3 $43.25 7 200 NGPVC04 4 $46.50 9 200 NGPVC06 6 $56.25 13 100 NGPVC08 8 $83.25 17 100 Mechanical Joint Wedge Action Restraint for use on PVC Pipe 3" size for IPS PVC Pipe only 4"-12" sizes for C900 and IPS PVC Pipe NGPVC10 10 $157.50 23 50 NGPVC12 12 $165.75 28 50 NGPVC16 16 $354.25 60 10 PVC NACIPGRIP Mechanical Joint Restraint for C900/C905/IPS PVC Pipe Packaged With Accessories NGPVCPK03 3 $63.75 10 NGPVCPK04 4 $68.50 12 Packaged with MJ gasket and low alloy steel T-bolts, both of which meet the requirements of ANSI/AWWA C111/ A21.11 Please Call for custom packaging with longer bolts, Blue bolts and nuts or with zinc anode nuts Bolts and gaskets are boxed separately from the restraint in the 12 inch and larger sizes. NGPVCPK06 6 $85.75 18 NGPVCPK08 8 $115.75 123 NGPVCPK10 10 $201.50 31 NGPVCPK12 12 $211.25 37 NGPVCPK16 16 $419.50 70 PLEASE CALL : FOR ANY SPECIAL COATING Toll Free : 888 506-6217 Fax : 732 745-7903