A solid and reliable foundation Walraven Roof Support Systems For any Strut based installation
BIS Yeti 480 Adjustable to compensate roof pitch up to 7 BIS Yeti 335 360 Rotatable insert Optimized Load distribution BIS Ursus
Walraven Roof Support Systems A solid and reliable foundation for any Strut based installation Walraven Roof Support Systems I 3 BIS Yeti 480 BIS Yeti 335 BIS Ursus No drilling required Prevents penetration of roof membrane and reduces the risk of leaks. Saves time and money Easy to use modular support system. Recyclable Mounting units are made of recycled weather and UV resistant materials. Sound & vibration proof With non-slip anti-vibration mat. Extensive system The products are used in combination with the BIS RapidStrut fixing system. Including BIS RapidStrut 41 x 41 Rail, BIS RapidStrut DS 5 41 x 51 Rail and a broad range of accessories. Optimal surface protection All products are suitable for indoor and outdoor use. The BIS UltraProtect 1000 surface protection provides advanced corrosion resistance. Project Engineering Walraven offers a wide range of technical services, such as: calculation and engineering construction design prefabrication service on-site construction support Optimized load distribution Optimal distribution of the load and reduction of dead weight protects the roof surface. 06/2017 - Subject to modifications
BIS Yeti 480 For flat and low pitched roofs and high loads
Walraven Roof Support Systems I 5 Adjustable for precise positioning 360 7 360 rotatable insert Adjustable to compensate roof pitch up to 7 Suitable for high loads With non-slip anti-vibration mat Optional stackable ballast block to increase stability Technical data Mouldings made of WPC, a composite of recycled plastic and wood fibre Resistant to UV and chemical influences BIS Yeti 480 vertical 480 x 480 mm # 6768 5 001 BIS Yeti 480 horizontal 480 x 480 mm # 6768 5 101 Ballast Block 8 kg 100 x 380 x 110 mm # 6768 5 401 (2x) (2x) (2x) (6x) (6x) (6x) H-set # 6768 5 301 Maximum allowed loads* The maximum allowed load is tested on a flat concrete surface under straight load. For technical support or advice on these products applied to anything other than concrete floors please contact our project engineers. * In combination with BIS RapidStrut Rail. 900 N 50 Nm 2.500 N! 2.500 N Tel. +31 (0)297 23 30 00 06/2017 - Subject to modifications
Walraven Roof Support Systems I 7 Flexible application options with BIS RapidStrut System Combines with all BIS Yeti & BIS Ursus products Extensive range of rails and accessories Fast and easy fixing Very high corrosion resistance 06/2017 - Subject to modifications
BIS Yeti 335 For flat roofs
Walraven Roof Support Systems I 9 Adjustable for precise positioning 360 360 rotatable insert With non-slip anti-vibration mat Technical data Mouldings made of WPC, a composite of recycled plastic and wood fibre Resistant to UV and chemical influences BIS Yeti 335 335 x 335 mm For horizontal and vertical use # 6768 5 201 (2x) (2x) (2x) (6x) (6x) (6x) H-set # 6768 5 302 Maximum allowed loads* 50 Nm The maximum allowed load is tested on a flat concrete surface under straight load. For technical support or advice on these products applied to anything other than concrete floors please contact our project engineers. * In combination with BIS RapidStrut Rail. 900 N 2.000 N! 2.000 N Tel. +31 (0)297 23 30 00 06/2017 - Subject to modifications
BIS Ursus Foot For supporting small pipework systems, ductwork runs and cable trays
BIS Ursus Foot For linear installation systems Walraven Roof Support Systems I 11 With included BIS RapidStrut Rail For linear installation with BIS RapidStrut System High corrosion resistance; stands min. 1.000 hours salt spray test Technical data Material: vulcanized rubber, black; Strut Rail made of steel 1.0242 Resistant to UV and chemical influences 1. BIS Ursus 250 x 130 mm - # 6768 7 250 2. BIS Ursus 400 x 130 mm - # 6768 7 400 3. BIS Ursus 600 x 240 mm - # 6768 7 600 1. 2. 3. Maximum allowed loads* The maximum allowed load is tested on a flat concrete surface under straight load. For technical support or advice on these products applied to anything other than concrete floors please contact our project engineers. * In combination with BIS RapidStrut Rail.! 1.000 N (# 6768 7 250) 2.000 N (# 6768 7 400) 3.000 N (# 6768 7 600) Tel. +31 (0)297 23 30 00 06/2017 - Subject to modifications
Find out how we can support you Would you like to find out more about any of the solutions described in this brochure? Or would you like to discuss how we could help you find the best possible solution for your project? Get in touch today! Walraven Roof Support Systems (EN-INT) - 06/2017 - pdf Subject to modifications Other countries Walraven International P.O. Box 15 3640 AA Mijdrecht (NL) Tel. +31 (0)297 23 30 00 Fax +31 (0)297 23 30 99 export@ Walraven Group Mijdrecht (NL) Tienen (BE) Bayreuth (DE) Banbury (GB) Malmö (SE) Grenoble (FR) Barcelona (ES) Kraków (PL) Mladá Boleslav (CZ) Moscow (RU) Kyiv (UA) Detroit (US) Shanghai (CN) Dubai (AE) Budapest (HU) NL: