Insulation CI/Sfb (2 ) Rn7 M2 Fourth Issue June 2011 Product Selector INSULATION FOR ROOFS, WALLS & FLOORS Visit our brand new website: www.kingspaninsulation.co.uk Low Energy Low Carbon Buildings
Kingspan Insulation Ltd reserves the right to amend product specifications without prior notice. The information contained in the document is given in good faith and applies to the uses described. Recommendations for use should be verified as to the suitability and compliance with actual requirements, specifications and any applicable laws and regulations. Kingspan Insulation recommend using the Technical Advice service (see back cover). 2
Contents Page Product Selector Chart 4 U value Time Saver 6 Building Regulations and Standards 7 Roof Insulation 9 Kooltherm K7 Pitched Roof Board 10 Thermapitch TP10 11 Thermaroof TR21 12 Thermaroof TR25 13 Thermaroof TR26 LPC/FM 14 Thermaroof TR27 LPC/FM 15 Thermaroof TR31 16 Thermataper TT46 LPC/FM 17 Thermataper TT47 LPC/FM 18 Kooltherm K11 Roofboard 19 Styrozone N 300 R 20 Styrozone H 350 R 21 Styrozone N 500 R 22 Styrozone N 700 R 23 Wall Insulation 25 Kooltherm K5 External Wall Board 26 Kooltherm K8 Cavity Board 27 Kooltherm K12 Framing Board 28 Kooltherm K15 Rainscreen Board 29 Kooltherm K17 Insulated Plasterboard 30 Kooltherm K18 Insulated Plasterboard 31 Thermawall TW50 32 Thermawall TW55 33 Styrozone N 300 R 20 Styrozone H 350 R 21 Floor Insulation 35 Kooltherm K3 Floorboard 36 Kooltherm K10 FM Soffit Board 37 Thermafloor TF70 38 Thermafloor TF73 39 Styrozone N 300 R 20 Styrozone H 350 R 21 Styrozone N 500 R 22 Styrozone N 700 R 23 Cavity Closers 41 Kooltherm Cavity Closer and Kooltherm Cavity Closer PLUS 42 Thermabate & Thermabate PLUS 44 Breathable Membranes 46 nilvent 47 3 Roof Insulation Wall Insulation Floor Insulation Cavity Closers Breathable Membranes
Product Selector Roof Insulation Kooltherm K7 Pitched Roof Board Thermapitch TP10 Thermaroof TR21 Thermaroof TR25 Thermaroof TR26 LPC/FM Thermaroof TR27 LPC/FM Thermaroof TR31 Thermataper TT46 LPC/FM Thermataper TT47 LPC/FM Kooltherm K11 Roof Board Styrozone N 300 R Styrozone H 350 R Styrozone N 500 R Styrozone N 700 R nilvent Pitched Roof Insulation Over / between / under rafter sarking Breathable membrane Flat Roof Insulation Tapered Roofing System Under partially bonded built up felt Under cold liquid applied waterproofing Under mastic asphalt Directly over timber joists Under torch on felt waterproofing Under mechanically fixed, single ply non bituminous membranes Under fully adhered singly ply membranes In LPCB/FM approved constructions Protected Membrane Roofs Traditionally protected membrane / Roof gardens Car park decks Lightweight protected membrane / maintenance access Green Roofs Insulation suitable for use under Green Roofs 4
Product Selector Wall Insulation Kooltherm K5 External wall Board Kooltherm K8 Cavity Board Kooltherm K12 Framing Board Kooltherm K15 Rainscreen Board Kooltherm K17 Insulated Plasterboard Kooltherm K18 Insulated Plasterboard Thermawall TW50 Thermawall TW55 Styrozone N 300 R Styrozone H 350 R nilvent Kooltherm Cavity Closer & Kooltherm Cavity Closer PLUS Thermabate & Thermabate PLUS Partial fill cavity walls Internal dry lining Insulated render systems Rainscreen cladding systems Timber frame Steel frame Basement walls Cavity Closers Breathable membrane Floor Insulation Kooltherm K3 Floorboard Kooltherm K10 FM Soffit Board Thermafloor TF70 Thermafloor TF73 Styrozone N 300 R Styrozone H 350 R Styrozone N 500 R Styrozone N 700 R Solid ground floors Suspended ground floors Floating ground floors Soffit lining Heavy duty / industrial / cold store floors 5
U value Time Saver Help us to help you when requesting U values from Kingspan Insulation s Technical Advice Service. Please provide the following information for all building elements: What U value is required? Project address and postcode Type of building eg. Offices. Flat Roof What is the type of waterproofing being used? What is the roof substrate timber, concrete or profiled metal deck? Is there a ceiling if yes then is it plasterboard or suspended tile? If using Kingspan Thermaroof TR31 what are the joist size centres? If mechanical fixings are being used what are they (carbon steel, galvanised steel, stainless steel or telescopic fixings)? Pitched Roof What are the size and centres of the rafters or ceiling joists? Is the insulation at ceiling or rafter level? If at rafter level, is there a 50 mm ventilated airspace between the rafters above the insulation? If no 50 mm ventilated airspace, is there a breathable membrane above the rafters? If a breathable membrane is being used is it above or below the counter batten or draped into the rafter void? Wall Construction What is the wall construction cavity, solid wall, rendered? If cavity wall construction, what is the manufacturer and type of block being used for inner (and outer if applicable) leaf or its thermal conductivity (may also be known as λ value?) What is the internal wall finish? Is the wall above ground or basement wall? Ground Floor What is the perimeter / area ratio? (This is the length of the externally exposed floor slab perimeter measured on the inside wall, not including internal or separating walls, divided by the floor area.) Is the floor a solid ground bearing slab, suspended beam & block or suspended timber or concrete floor (if suspended timber the joist size and centres are required.) Floor Other Than Ground Is soffit insulation required? If the insulation is to be fitted between joists what are the joist size and centres? Technical Advice Telephone: 01544 387 382 Fax: 01544 387 482 Email: technical@kingspaninsulation.co.uk 6
Building Regulations and Standards England and Wales New Buildings (ADL 1A & ADL 2A) The main requirement of Approved Documents L1A and L2A is that buildings meet a defined CO 2 emissions target. The roof, wall and floor U values required to meet this target will depend on the design of the building, orientation, heating system etc. To ease the process, Kingspan Insulation has undertaken analysis to give the best starting point U values, for specifiers to work from in getting their designs to comply. They will be almost exactly what is required for some buildings and short of what is required for others. These best starting point U values are shown below. Existing Buildings (ADL 1B & ADL 2B) Approved Documents L1B and L2B give specific U value requirements for newly constructed elements and retained / refurbished elements. They apply to all works, regardless of whether the works relate to an extension, conversion or renovation. These required U values are shown below. New Buildings Existing Buildings Best Starting Point Extension, Conversion and Renovation Of All Buildings Dwellings Buildings Other New Elements Refurbishment / Than Dwellings Retained Elements Lofts 0.13 0.14 0.16 0.16 All other roofs 0.13 0.14 0.18 0.18 Walls 0.18 0.22 0.28 0.30 Floors 0.13 0.18 0.22 0.25 Scotland New Buildings (Section 6 Energy) The main requirement of Technical Handbooks Sections 6 is that buildings meet a defined CO 2 emissions target. For domestic, this target is generated by a set of 2010 notional buildings, which also offer a simplified elemental approach to compliance. If a building is constructed in accordance with the parameter values that define the notional building, then it will automatically comply with the CO 2 emissions target. The notional U values for roofs, walls and floors are shown opposite. For non domestic, the approach is the same as that described overleaf for ADL2A and best starting point U values are shown below. Existing Buildings (Section 6 Energy) Technical Handbooks Sections 6 give specific area weighted average U value requirements for newly constructed elements and altered / refurbished elements. They apply to most works*, regardless of whether the works relate to an extension, renovation, or conversion e.g. of a whole unheated building, loft or garage. For existing dwellings, there are differing requirements for newly constructed elements, depending upon the thermal efficiency of the existing building*. The required U values are shown below. New Buildings Existing Buildings Domestic Non Extension, Conversion & Domestic Renovation Most Works* Notional Best Domestic Domestic Domestic Non Building Starting New New Altered / Domestic Point Elements Elements Refurbished A* B* Elements Lofts 0.13 0.13 0.13 0.15 0.15 0.15 All other roofs 0.13 0.13 0.15 0.18 0.18 0.15 Walls 0.19 0.22 0.19 0.22 0.22 0.25 Floors 0.15 0.18 0.15 0.18 0.18 0.20 * There are specific exceptions relating to, e.g. conversion of heated buildings and infilling of openings. Please consult the Technical Handbooks. Column B applies where the existing building has, or will be improved to have, wall U values better than 0.7 W/m 2. K and roof U values better than 0.25 W/m 2. K. If the U values are worse, then column A applies. 7
8 Kingspan Kooltherm K7 Pitched Roof Board
Roof Insulation Roof Insulation
Roof Insulation K7 Pitched Roof Board INSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACES New build Re roofing Loft conversion Unventilated pitched roofs between rafters Unventilated pitched roofs between and over rafters Ventilated pitched roofs between rafters Kingspan nilvent Kingspan Kooltherm K7 Pitched Roof Board Kingspan Kooltherm K18 Insulated Plasterboard Thermal Conductivity 0.023 W/m. K (insulant thickness < 25 mm) 0.021 W/m. K (insulant thickness 25 44 mm) 0.020 W/m. K (insulant thickness 45 mm) Facings Composite foil Premium performance rigid thermoset modified resin insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.2 x 2.4 m Thicknesses Available 25 140 mm Complementary Products nilvent (page 47) Kooltherm K18 Insulated Plasterboard (page 31) 10
TP10 INSULATION FOR TILED OR SLATED PITCHED WARM ROOF SPACES New build Re roofing Loft conversion Unventilated pitched roofs between rafters Unventilated pitched roofs between and over rafters Ventilated pitched roofs between rafters Roof Insulation Kingspan nilvent Kingspan Thermapitch TP10 Kingspan Kooltherm K18 Insulated Plasterboard Thermal Conductivity Facings Thicknesses Available 0.022 W/m. K Composite foil High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.2 x 2.4 m 20 150 mm Complementary Products nilvent (page 47) Kooltherm K18 Insulated Plasterboard (page 31) 11
Roof Insulation TR21 INSULATION FOR FLAT ROOFS WATERPROOFED WITH PARTIALLY BONDED BUILT UP FELT AND MASTIC ASPHALT New build Refurbishment Metal, concrete or timber decks Kingspan Thermaroof TR21 Kingspan Kooltherm K8 Cavity Board Thermal Conductivity Facings Thicknesses Available Complementary Products 0.027 W/m. K (insulant thickness < 80 mm) 0.026 W/m. K (insulant thickness 80 119 mm) 0.025 W/m. K (insulant thickness 120 mm) Glass reinforced perforated cellulose High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.2 x 0.6 m 30 120 mm 12
TR25 INSULATION FOR FLAT ROOFS WATERPROOFED WITH COLD LIQUID APPLIED WATERPROOFING Fast track building programmes New build Refurbishment Metal, concrete or timber decks Roof Insulation Kingspan Thermaroof TR25 Kingspan Kooltherm K8 Cavity Board Thermal Conductivity Facings Thicknesses Available Complementary Products 0.026 W/m. K (insulant thickness < 80 mm) 0.025 W/m. K (insulant thickness 80 119 mm) 0.024 W/m. K (insulant thickness 120mm) Coated glass tissue High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.2 x 0.6 m 50 120 mm 13
Roof Insulation TR26 LPC/FM INSULATION FOR FLAT ROOFS WATERPROOFED WITH MECHANICALLY FIXED SINGLE PLY WATERPROOFING LPCB / FM compliance Fast track building programmes New build Refurbishment Metal, concrete or timber decks LPS 1181: Part 1 Certificate No. 388b/01 Class 1 Roof Construction Kingspan Thermaroof TR26 Kingspan Kooltherm K8 Cavity Board Thermal Conductivity 0.022 W/m. K Facings Composite foil High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.2 x 2.4 m Thicknesses Available 25 150 mm Complementary Products Thermataper TT46 LPC/FM (page 17) 14
TR27 LPC/FM INSULATION FOR FLAT ROOFS WATERPROOFED WITH FULLY ADHERED SINGLE PLY, PARTIALLY BONDED BUILT UP FELT, MASTIC ASPHALT AND COLD LIQUID APPLIED WATERPROOFING Roof Insulation LPCB / FM compliance Fast track building programmes New build Refurbishment Metal, concrete or timber decks LPS 1181: Part 1 Certificate No. 388b/01 Class 1 Roof Construction Kingspan Thermaroof TR27 Kingspan Kooltherm K8 Cavity Board Thermal Conductivity 0.026 W/m. K (insulant thickness < 80 mm) 0.025 W/m. K (insulant thickness 80 119 mm) 0.024 W/m. K (insulant thickness 120mm) Facings Coated glass tissue High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.2 x 0.6 m and 1.2 x 2.4 m Thicknesses Available 25 130 mm (1.2 x 0.6 m boards) and 50 145 mm (1.2 x 2.4 m boards) Complementary Products Thermataper TT47 LPC/FM (page 18) 15
Roof Insulation TR31 STRUCTURAL INSULATION / FSC CERTIFIED PLYWOOD COMPOSITE FOR FLAT ROOFS WATERPROOFED WITH PARTIALLY BONDED BUILT UP FELT New build Refurbishment Directly over timber decks Kingspan Thermaroof TR31 Kingspan Kooltherm K8 Cavity Board Kingspan Kooltherm K7 Pitched Roof Board Thermal Conductivity Upper Facing Lower Facing Thicknesses Available Complementary Products 0.022 W/m. K (insulant) 0.140 W/m. K (plywood) FSC certified 6 mm WBP exterior grade plywood High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) Composite foil 1.2 x 2.4 m 50 120 mm (Insulation thickness only) 16
TT46 LPC/FM TAPERED INSULATION FOR FLAT ROOFS WATERPROOFED WITH MECHANICALLY FIXED SINGLE PLY WATERPROOFING Alternative to expensive screed to falls roofs Reducing load bearing implications for new or existing structures Fast track building programmes New build Refurbishment Metal, concrete or timber decks Roof Insulation LPS 1181: Part 1 Certificate No. 388b/01 Class 1 Roof Construction Kingspan Thermataper TT46 LPC/FM Kingspan Kooltherm K8 Cavity Board Thermal Conductivity Facings 0.022 W/m. K Composite foil High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.2 x 2.4 m Manufactured Rate of Fall 1:30; 1:40; 1:60; 1:80 Complementary Products Thermaroof TR26 LPC/FM (page 14) 17
Roof Insulation TT47 LPC/FM TAPERED INSULATION FOR FLAT ROOFS WATERPROOFED WITH FULLY ADHERED SINGLE PLY, PARTIALLY BONDED BUILT UP FELT, MASTIC ASPHALT AND COLD LIQUID APPLIED WATERPROOFING Alternative to expensive screed to falls roofs Reducing load bearing implications for new or existing structures Fast track building programmes New build Refurbishment Metal, concrete or timber decks LPS 1181: Part 1 Certificate No. 388b/01 Class 1 Roof Construction Kingspan Thermataper TT47 LPC/FM Kingspan Kooltherm K8 Cavity Board Thermal Conductivity 0.026 W/m. K (insulant thickness < 80 mm) 0.025 W/m. K (insulant thickness 80 119 mm) 0.024 W/m. K (insulant thickness 120 mm) Facings Coated glass tissue High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.2 x 0.6 m and 1.2 x 2.4 m Manufactured Rate of Fall 1:30; 1:40; 1:60; 1:80 Complementary Products Thermaroof TR27 LPC/FM (page 15) 18
K11 Roofboard INSULATION FOR FLAT ROOFS WATERPROOFED WITH FULLY BONDED TORCH APPLIED MULTI LAYER BITUMINOUS WATERPROOFING Roof Insulation New build Refurbishment Metal, concrete or timber decks Kingspan Kooltherm K11 Roof Board Kingspan Kooltherm K8 Cavity Board Thermal Conductivity Upper Facing Lower Facing Thicknesses Available Complementary Products 0.023 W/m. K (insulant thickness 25 44 mm) 0.021 W/m. K (insulant thickness 45 mm) 0.050 W/m. K (perlite) 20 mm bitumen coated perlite Premium performance rigid thermoset modified resin insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) Glass tissue 1.2 x 1.0 m 40 and 70 mm (Insulation thickness only) 19
Roof Insulation N 300 R INSULATION FOR INVERTED ROOFS, BASEMENTS, CAR PARK DECKS, AND HEAVY DUTY COMMERCIAL, INDUSTRIAL AND COLD STORE FLOORING New build Refurbishment Inverted / protected membrane roofs Basement walls Below floor slab or screed Kingspan Kooltherm K8 Cavity Board Kingspan Styrozone N 300 R Thermal Conductivity 0.035 W/m. K (insulant thickness < 80 mm) 0.037 W/m. K (insulant thickness 80 mm) 0.038 W/m. K (insulant thickness 100 160 mm) 0.040 W/m. K (insulant thickness > 160 mm) High performance rigid extruded polystyrene insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.25 x 0.6 m Thicknesses Available 30 180 mm Complementary Products Styrozone H 350 R (page 21) 20
H 350 R INSULATION FOR INVERTED ROOFS, BASEMENTS, CAR PARK DECKS, AND HEAVY DUTY COMMERCIAL, INDUSTRIAL AND COLD STORE FLOORING Roof Insulation New build Refurbishment Inverted / protected membrane roofs Basement walls Below floor slab or screed Kingspan Styrozone H 350 R Kingspan Kooltherm K8 Cavity Board Thermal Conductivity 0.029 W/m. K (insulant thickness 120 mm) 0.031 W/m. K (insulant thickness > 120 mm) High performance rigid extruded polystyrene insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) 1.25 x 0.6 m Thicknesses Available 30 160 mm Complementary Products Styrozone N 300 R (page 20) 21
Roof Insulation N 500 R INSULATION FOR CAR PARK DECKS, AND HEAVY DUTY COMMERCIAL, INDUSTRIAL AND COLD STORE FLOORING New build Refurbishment Inverted / protected membrane roofs Below floor slab or screed Kingspan Styrozone N 500 R Thermal Conductivity 0.036 W/m. K (insulant thickness 70 mm) 0.038 W/m. K (insulant thickness > 70 mm) High performance rigid extruded polystyrene insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.25 x 0.6 m Thicknesses Available 30 120 mm Complementary Products Styrozone N 300 R (page 20) Styrozone H 350 R (page 21) Styrozone N 700 R (page 23) 22
N 700 R INSULATION FOR CAR PARK DECKS, AND HEAVY DUTY COMMERCIAL, INDUSTRIAL AND COLD STORE FLOORING Roof Insulation New build Refurbishment Inverted / protected membrane roofs Below floor slab or screed Kingspan Styrozone N 700 R Thermal Conductivity 0.036 W/m. K (insulation thickness 50 mm) High performance rigid extruded polystyrene insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.25 x 0.6 m Thicknesses Available 50 mm Complementary Products Styrozone N 500 R (page 22) 23
24 Kingspan Kooltherm K8 Cavity Board
Wall Insulation Wall Insulation
K5 External Wall Board EXTERNAL INSULATION FOR MASONRY WALLS Wall Insulation Solid walled buildings Transforming and upgrading the appearance of existing buildings New build Refurbishment Insulated render system on masonry Kingspan Kooltherm K5 External Wall Board Thermal Conductivity Facings Thicknesses Available Complementary Products 0.023 W/m. K (insulant thickness < 25 mm) 0.021 W/m. K (insulant thickness 25 44 mm) 0.020 W/m. K (insulant thickness 45 mm) Glass tissue Premium performance rigid thermoset modified resin insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.2 x 0.6 m 20 100 mm 26
K8 Cavity Board PARTIAL FILL CAVITY WALL INSULATION Traditional cavity wall construction methods New build All brick and block types Kingspan Kooltherm K8 Cavity Board Wall Insulation Kingspan Kooltherm K3 Floorboard Thermal Conductivity 0.023 W/m. K (insulant thickness < 25 mm) 0.021 W/m. K (insulant thickness 25 44 mm) 0.020 W/m. K (insulant thickness 45 mm) Facings Composite foil Premium performance rigid thermoset modified resin insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.2 x 0.45 m Thicknesses Available 20 120 mm Complementary Products Kooltherm Cavity Closer and Kooltherm Cavity Closer PLUS (page 42) Thermabate and Thermabate PLUS Cavity Closer (page 44) 27
K12 Framing Board INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS Wall Insulation Insulating between studs Insulating sheathing Steel frame walls Timber clad / tile hung timber frame walls Kingspan Kooltherm K12 Framing Board Kingspan nilvent Kingspan Kooltherm K18 Insulated Plasterboard Thermal Conductivity 0.023 W/m. K (insulant thickness < 25 mm) 0.021 W/m. K (insulant thickness 25 44 mm) 0.020 W/m. K (insulant thickness 45 mm) Facings Composite foil Premium performance rigid thermoset modified resin insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.2 x 2.4 m Thicknesses Available 25 140 mm Complementary Products nilvent (page 47) Kooltherm K18 Insulated Plasterboard (page 31) 28
K15 Rainscreen Board INSULATION FOR RAINSCREEN CLADDING SYSTEMS Proprietary and non proprietary external finishes Insulated rainscreen cladding systems on both masonry and steel frames New build Refurbishment Wall Insulation Kingspan Kooltherm K15 Rainscreen Board Thermal Conductivity Facings Thicknesses Available Complementary Products 0.023 W/m. K (insulant thickness < 25 mm) 0.021 W/m. K (insulant thickness 25 44 mm) 0.020 W/m. K (insulant thickness 45 mm) Composite foil Premium performance rigid thermoset modified resin insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.2 x 2.4 m 25 130 mm Kingspan Kooltherm K15 Rainscreen Board is also available with a black foil face. 29
K17 Insulated Plasterboard INSULATED PLASTERBOARD FOR PLASTER DAB / ADHESIVE BONDED DRY LINING Wall Insulation Traditional cavity walls Solid rendered walls Insulation and dry lining applications New build Refurbishment Kingspan Kooltherm K17 Insulated Plasterboard Kingspan Kooltherm K8 Cavity Board Thermal Conductivity 0.023 W/m. K (insulant thickness < 25 mm) 0.021 W/m. K (insulant thickness 25 44 mm) 0.020 W/m. K (insulant thickness 45 mm) 0.190 W/m. K (plasterboard) Front Facing 12.5 mm plasterboard Premium performance rigid thermoset modified resin insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) Reverse Facing Glass tissue 1.2 x 2.4 m Thicknesses Available 20 100 mm (Insulation thickness only) Complementary Products Kooltherm Cavity Closer and Kooltherm Cavity Closer PLUS (page 42) Thermabate and Thermabate PLUS Cavity Closer (page 44) Kooltherm K18 Insulated Plasterboard (page 31) 30
K18 Insulated Plasterboard INSULATED PLASTERBOARD FOR MECHANICALLY FIXED DRY LINING Solid walls Timber frame walls Timber rafters Metal furring systems Insulation, dry lining and vapour control applications New build Refurbishment Loft conversions Wall Insulation Kingspan Kooltherm K18 Insulated Plasterboard Thermal Conductivity 0.023 W/m. K (insulant thickness < 25 mm) 0.021 W/m. K (insulant thickness 25 44 mm) 0.020 W/m. K (insulant thickness 45 mm) 0.190 W/m. K (plasterboard) Front Facing 12.5 mm plasterboard Premium performance rigid thermoset modified resin insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) Reverse Facing Composite foil 1.2 x 2.4 m Thicknesses Available 20 100 mm (Insulation thickness only) Complementary Products Kooltherm K12 Framing Board (page 28) Kooltherm K7 Pitched Roofing Board (page 10) Kooltherm Cavity Closer and Kooltherm Cavity Closer PLUS (page 42) Thermabate and Thermabate PLUS Cavity Closer (page 44) Kooltherm K17 Insulated Plasterboard (page 30) 31
TW50 PARTIAL FILL CAVITY WALL INSULATION Traditional cavity wall construction methods New build All brick and block types Wall Insulation Kingspan Thermawall TW50 Thermal Conductivity Facings Thicknesses Available 0.022 W/m. K Composite Foil High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.2 x 0.45 m 20 100 mm Complementary Products Thermabate and Thermabate PLUS Cavity Closer (page 44) Kooltherm Cavity Closer and Kooltherm Cavity Closer PLUS (page 42) Kooltherm K8 Cavity Board (page 27) 32
TW55 INSULATION FOR TIMBER AND STEEL FRAMING SYSTEMS Insulating between studs Insulating sheathing Steel frame walls Timber clad / tile hung timber frame walls Kingspan Thermawall TW55 Wall Insulation Kingspan nilvent Kingspan Kooltherm K18 Insulated Plasterboard Thermal Conductivity Facings Thicknesses Available 0.022 W/m. K Composite foil High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.2 x 2.4 m 20 150 mm Complementary Products Kooltherm K18 Insulated Plasterboard (page 31) nilvent (page 47) Kooltherm K12 Framing Board (page 28) 33
34 Kingspan Kooltherm K3 Floorboard
Floor Insulation Floor Insulation
INSULATION FOR FLOORS K3 Floorboard Below the floor slab / screed Beam and block floors Suspended timber floors Underfloor heating applications Floor perimeter insulation New build Refurbishment Kingspan Kooltherm K8 Cavity Board Kingspan Kooltherm K3 Floorboard Floor Insulation Thermal Conductivity Facings Thicknesses Available Complementary Products 0.023 W/m. K (insulant thickness < 25 mm) 0.021 W/m. K (insulant thickness 25 44 mm) 0.020 W/m. K (insulant thickness 45 mm) Glass tissue Premium performance rigid thermoset modified resin insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.2 x 2.4 m 25 140 mm 36
K10 FM Soffit Board INSULATION FOR STRUCTURAL CEILINGS (SOFFITS) Insulating under structural ceilings Car park ceilings Kingspan Kooltherm K10 Soffit Board Floor Insulation Thermal Conductivity Upper Facing Exposed Facing Thicknesses Available Complementary Products 0.023 W/m. K (insulant thickness < 25 mm) 0.021 W/m. K (insulant thickness 25 44 mm) 0.020 W/m. K (insulant thickness 45 mm) Glass tissue Premium performance rigid thermoset modified resin insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) Composite foil 1.2 x 2.4 m 25 140 mm 37
TF70 INSULATION FOR SOLID CONCRETE AND SUSPENDED GROUND FLOORS Below the floor slab / screed Beam and block floors Domestic floating floors Suspended timber floors Underfloor heating applications Floor perimeter insulation New build Refurbishment Kingspan Kooltherm K8 Cavity Board Kingspan Thermafloor TF70 Floor Insulation Thermal Conductivity Facings Thicknesses Available Complementary Products 0.022 W/m. K Composite foil High performance rigid thermoset polyisocyanurate (PIR) insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 1.2 x 2.4 m 20 150 mm 38
TF73 INSULATION FOR FLOATING AND SUSPENDED GROUND FLOORS Solid floating ground floors Beam and block floors Suspended timber floors Areas where high compressive strength required New build Refurbishment Kingspan Kooltherm K8 Cavity Board Kingspan Thermafloor TF73 Floor Insulation Thermal Conductivity Upper Facing Thicknesses Available Complementary Products 0.029 W/m. K (insulant thickness 20 70 mm) 0.030 W/m. K (insulant thickness 70 120 mm) 0.150 W/m. K (chipboard) FSC certified 18 mm T&G chipboard High performance rigid extruded polystyrene insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) 2.4 x 0.6 m 25 80 mm (Insulation thickness only) 39
40 Kingspan Kooltherm K18 Insulated Plasterboard
Cavity Closers Cavity Closers
Cavity Closer FOR CLOSING CAVITIES AROUND OPENINGS IN MASONRY WALLS Traditional cavity wall construction Window and door cavities Use with PVCu and wooden frames Simplified construction Cavity widths up to 305 mm Using as a frame former (Kooltherm Cavity Closer PLUS only) Kingspan Kooltherm Cavity Closer Kingspan Kooltherm K8 Cavity Board Cavity Closers Thermal Conductivity Sheathing Length Widths Available 0.022 W/m.K PVC U extrusion Premium performance rigid thermoset modified resin insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP) 2.4 m 50 150 mm (or combinations up to 305 mm) Complementary Products Kooltherm K8 Cavity Board (page 27) Thermawall TW50 (page 32) Kooltherm K17 Insulated Plasterboard (page 30) Kooltherm K18 Insulated Plasterboard (page 31) 42
Kingspan Kooltherm Cavity Closer 50 For cavities 50 74 mm wide Kingspan Kooltherm Cavity Closer 75 For cavities 75 99 mm wide Kingspan Kooltherm Cavity Closer 100 For cavities 100 109 mm wide 128 128 128 31.5 31.5 31.5 48 50 6 75 48 6 100 48 6 Kingspan Kooltherm Cavity Closer 110 For cavities 110 124 mm wide Kingspan Kooltherm Cavity Closer 125 For cavities 125 149 mm wide Kingspan Kooltherm Cavity Closer 150 For cavities 150 155 mm wide 170 170 170 31.5 31.5 31.5 110 48 6 125 48 6 150 48 6 Cavity Closer PRE FORMED TO SPECIFIED OPENING SIZES FOR CLOSING CAVITIES IN PLASTIC, TIMBER, OR METAL WINDOW FRAMES AND AN INSULATED LINTEL Cavity Closers 43
FOR CLOSING CAVITIES AROUND OPENINGS IN MASONRY WALLS Traditional cavity wall construction Window and door cavities Use with PVCu and wooden frames Simplified construction Cavity widths up to 200 mm Using as a frame former (Thermabate PLUS only) Kingspan Thermabate Kingspan Kooltherm K8 Cavity Board Cavity Closers Thermal Conductivity 0.034 W/m.K Sheathing PVC U extrusion High performance rigid thermoset urethane insulant Length 3.0 m Widths Available 50 100 mm* Complementary Products Kooltherm K8 Cavity Board (page 27) Thermawall TW50 (page 32) Kooltherm K17 Insulated Plasterboard (page 30) Kooltherm K18 Insulated Plasterboard (page 31) *Sections can be joined together to suit cavity widths up to 200 mm. 44
Thermabate 50 (Brown) Thermabate 65 (Black) Thermabate 75 (White) Thermabate 85 (Yellow) Thermabate 90 (Orange) Thermabate 100 (Green) PRE FORMED TO SPECIFIED OPENING SIZES FOR CLOSING CAVITIES IN PLASTIC, TIMBER, OR METAL WINDOW FRAMES AND AN INSULATED LINTEL Cavity Closers 45
Breathable Membranes Breathable Membranes
BREATHABLE MEMBRANE FOR UNVENTILATED PITCHED ROOFS AND TIMBER FRAME WALLS All types of pitched roofing Timber framing Under battens or directly on sarking boards New build Re roofing Kingspan nilvent Water Vapour Resistance Liquid Water Penetration Tensile Strength Roll Length Roll Width Thickness 0.17 MN. s/g > 2 m 233 N longitudinal 162 N transverse 50 m 1.5 m 0.5 mm Area Per Roll 75 m 2 Complementary Products Kooltherm K7 Pitched Roof Board (page 10) Kooltherm K12 Framing Board (page 28) Thermapitch TP10 (page 11) Thermawall TW55 (page 33) 47 Breathable Membranes
General Enquiries Tel: +44 (0) 1544 388 601 Fax: +44 (0) 1544 388 888 email: info@kingspaninsulation.co.uk Technical Advice Tel: +44 (0) 1544 387 382 Fax: +44 (0) 1544 387 482 email: technical@kingspaninsulation.co.uk Tapered Roofing Tel: +44 (0) 1544 387 383 Fax: +44 (0) 1544 387 483 email: tapered@kingspaninsulation.co.uk Literature and Samples Tel: +44 (0) 1544 387 384 Fax: +44 (0) 1544 387 484 email: literature@kingspaninsulation.co.uk Downloads: www.kingspaninsulation.co.uk/literature Customer Service Tel: +44 (0) 1544 388 601 Fax: +44 (0) 1544 388 888 email: customerservice@kingspaninsulation.co.uk Kingspan Insulation Ltd Pembridge, Leominster, Herefordshire HR6 9LA, UK www.kingspaninsulation.co.uk Kingspan, Kooltherm, nilvent, Styrozone, Thermafloor, Thermaroof, Thermawall, Thermapitch, Thermataper, the zo Device and the Lion Device are Registered Trademarks of the Kingspan Group plc in the UK Ireland and other countries. All rights reserved. Kingspan Insulation Ltd. Registered in England & Wales, No. 01882722. Registered Office: Pembridge, Leominster, Herefordshire HR6 9LA UK.