Minimally Invasive Surgery

Similar documents
Human resources researchers (9) (of them 3 degree holders and 4 PhD students) and laboratory assistants (3)

1161 Sawgrass Corp. Pkwy, Sunrise, FL of 6

Spain Knee Replacement Procedures Outlook to 2020

Advancing minimally invasive. therapeutics through novel device. development. Minima y Invasive New Technologies T H E L E O N A M. A N D H A R R Y B.

3rd International Conference on Surgery and Medicine Theme: Emerging Technologies & Advanced Practices in Surgery

A Coordinated Registry Network Based on the Vascular Quality Initiative: VISION. Vascular Implant Surveillance & Interventional Outcomes Network

Medical Engineering (Biomedical Engineering, Clinical Engineering, Bioengineering) Medical Materials Science (Biomaterials) Dental Materials Science

Xcede Technologies, Inc. Dynasil Corporation of America Annual Meeting of Stockholders. Peter Sulick, Chairman, President and CEO February 26, 2015

Joining forces in the MedTech community. Prof. dr. ir. Pascal Verdonck February 10, 2015

Santen Acquisition of InnFocus, Developer of MicroShunt Glaucoma Implant Device

EvaluateMedTech has used a number of sources within the site to develop a 4-level classification tree based on the FDA approvals process.

Key Research Projects Faculty of Engineering Chulalongkorn University

Coming together is a beginning Keeping together is progress Working together is success. ~ Henry Ford ~

A New Day in Orthopedic Devices. Proven Products + Highest Quality Manufacturing + Lowest Cost = WE WIN!

Investor Presentation

Special Issue. Mesoblast Limited

DESCRIPTION OF THE RESEARCH RESULTS

FORWARD LOOKING STATEMENT

APPROVED BY: CURRICULUM MASTER S DEGREE MEDICAL DOCTOR THE COMPLETE COURSE OF EDUCATION LASTS FOR 6 YEARS

Technology and its clinical application in the field of computer-assisted radiology and surgery

The Lancet Publishes Results from the Landmark Phase III Rivaroxaban Study RECORD2

Advancing the Open Ventral Hernia Repair Experience

Romania Importer-distributors of Orthopaedic Implants and Medical Devices

Evaluation & Decision Guides

Histoacryl A revolution in mesh fixation

MECH ENG 762 Computational Modeling of Circulatory System Term 1 (September - December 2018)

Implementing Meaningful Methods of Clinical Integration

ADDIS ABABA UNIVERSITY CENTER OF BIOMEDICAL ENGINEERING

Our job today Enlist you to help us cross the Translational Divide between the lab bench and the patient s bedside Demonstrate that this will

US Regulatory and Marketing Barriers for Medical Devices

This document is a preview generated by EVS

CHAPTER 1. Survey of Clinical Cases of Biomaterials-Tissue Interactions: The Paradigm

Bioengineering: Where Biology Meets Bioengineering

Development of Veress Needle Insertion Robotic System and Its Experimental Study for Force Acquisition in Soft Tissue

Enrollment Challenges in Cardiothoracic Surgical Clinical Trials

Anika Therapeutics, Inc.

SAMPLE. Viscosupplementation - Pipeline Review, Reference Code: GDME0031EPD. Publication Date: June 2015

UK & Japanese Biomedical Engineering Collaborations. Anil Vaidya Life Science Specialist, JETRO

Recommended Agent First alternative for β-lactam allergy Alternative Agents (in order of preference) document β-lactam allergy for SCIP)

SCIENCE. VALUE. INNOVATION.

Why study Biomedical Engineering?

CASCINATION CAS-ONE SURGERY STEREOTACTIC NAVIGATION SYSTEM FOR ABDOMINAL SURGERY

MDGS.TASE MDGS.Nasdaq August 2018

Introduction to Biomedical Engineering. What is Biomedical Engineering?

Finally! Everything you need when supporting soft tissue; nothing you don t. Strength and Beauty. Inside and Out.

Writing Your Phase II SBIR Commercialization Plan

Journal of Biomedical Materials Research, Vol. 20, (1986) John Wiley & Sons, Inc.

Key Priority: ADVOCACY GOAL: To be the leading advocate for the field of arthroscopy among regulatory agencies and payers.

VERMONT. Bioscience Performance Metrics. Vermont Page 1

Molecular Diagnostics

REFERENCE CODE GDME1016FPR PUBLICATION DATE JULY 2013 HERNIA REPAIR CURRENT AND FUTURE PLAYERS

Course Code: BMEG5100 Course Title: Advanced Medical Robotics Course Code: BMEG5110 Course Title: Advanced Medical Devices and Sensor Networks

Biological Prostheses

1. Practice experience reports versus research projects subject to EC approval (Appendix 1)

Research Involving FDA Regulated Devices Policy 606 Version: 1.1 POLICY

Polidocanol Endovenous Microfoam (PEM) Comprehensive Treatment for Great Saphenous Vein System (GSV) Incompetence

MEDPOR. Orbital Floor

The FDA/CDRH Perspective in the Regulation of Surgical Mesh

2/6/2019. Can We Do Better? Tissue Engineering. Tissue Engineering. Tissue Engineering. Mechanism. Why did repair of the ACL fail?

Deutsche Bank 33 rd Annual Healthcare Conference. Joe Almeida President, Medical Devices

Ventrio ST Hernia Patch featuring Sepra Technology

Some Trends in Health Technology

Statement of the. Society for Cardiovascular Angiography & Interventions. Presented by. Augusto D. Pichard, MD, FSCAI. Before the

Image Processing and Pattern Recognition Research Group

MDGS.TASE MDGS.Nasdaq March 2017

Disease Specific Data Standards: Case Studies in TB and Cardiology

ITALIAN HI-TECH INDUSTRY: THE CASE OF LIFE SCIENCES

ClinicalTrials.gov Updates. Gabrielle Gaspard Assistant Director Human Research Compliance

Standards and Regulatory Considerations for Orthopaedic Implants

Calprotectin Diagnostic Aid for Excluding Prosthetic Joint Infections (PJI) - Commercially launched, Patent pending

Understanding Clinical Equivalence

Application for Training Centre. BSET Fellowships

Ethics and Regulations in Clinical Research

Medical Devices: Engineering s Contributions to the Quality of Life

Overview & Introduction. BME 450: Biomedical Engineering Design I

Edito PORTRAIT I N F O R M I A N A L Y S E I I M P R O V E. Nathalie Couvreur

This document is a preview generated by EVS

CapSure Permanent Fixation System

Additive manufacturing for long term implants. Presentation Content

Precision in fixation

Specifically designed for abdominal wall repair STRUCTURAL

AHIMA supports the proposed changes to ICD-10-PCS that were presented at the March 9 th C&M Committee meeting.

Tendon/Ligament Repair

Technology Transfer, Academic and Industry Cooperations

Study population The study population comprised patients undergoing major hip or knee surgery.

The technologies described in this document are in development and are not available for clinical use

Surveillance and Medical Devices

Science Technology Innovation system regarding the Thai Healthcare and Medical Industries

Biotechnology Intellectual Property Managing at Comenius University

The Ventrio ST Hernia Patch Featuring Sepra Technology. Efficient:

The Next Revolution in Endoscopic Ultrasound Guided Biopsy Products

New Fully Absorbable Patch Based Large Hole Vascular Closure Device Arne Schwindt, MD

Addressing the Robot in the Room: How to offer robotic benefits without increasing procedural costs

TISSUE ENGINEERING AND REGENERATION: TECHNOLOGIES AND GLOBAL MARKETS

2018 PHYSICIAN CODING GUIDE ENB PROCEDURE

Investor Presentation. November 26, 2013

PRECISION-MACHINED COMPONENTS FOR MEDICAL APPLICATIONS. Case Studies

The Ultimate Guide To STEM CELL THERAPY. for Joint Disorders

INTERNATIONAL STANDARD

37 th Annual JP Morgan Healthcare Conference

Transcription:

Minimally Invasive Surgery 1

RECOOP HST Research Activity Inventory Please complete the template for each selected project your organization would like to share with the partners of the RECOOP HST Consortium and would like to invite other organizations to write FP7 or NIH proposals. Organization Department of Orthopedics Medical School, University of Pécs Area of the Research Large joint grafts: hip prosthesis, knee prosthesis, minimal invasive surgical technique Title of the Research Minimally Invasive Surgery Activity Department (complete address) Department of Orthopedics Medical School, University of Pécs, H- 7643 Pécs, Ifjúság út 13, Hungary Principal Investigator or Head of the Research Group Name: Prof. Dr. BELLYEI, Árpád Title: Prof. Dr. Tel: +36 72 536206 Fax: +36 72 536210 E-mail: arpad.bellyei@aok.pte.hu Web: www.pte.hu, www.pote.hu Abstract Maximum 500 characters Research area Development of large joint grafts Hip joint endoprstheses: The production, development, clinical trial and distribution of cemented, cementless and revisional hip prostheses in cooperation with Biotech Hungary, a multinational firm. Following the development of the complex system and acquisition of CE qualification, the process of trial has been started. Thirty-six cemented or cementless prostheses were implanted with a continuous assessment of the results, and, in seven cases, revisional surgery was performed. All this was carried out using minimal invasive surgical techniques. The Department functions as reference centre for Biotech. Demonstration of surgical procedures is carried out both for facilitating the distribution in institutions in this country and in the National Traumatology Institute in Zagreb. The development of a complex systematic technology for the production of cemented, cementless and revisional hip prostheses has been launched in cooperation with Sanatmetal Ltd. (Eger). Following the acquisition of the CE qualification for the cemented and cementless components, they were implanted in humans in seven cases altogether. Further development planned for this year includes the development of revisional hip prostheses, the acquisitions of CE qualification and the implantation into humans. All this is performed with minimal invasive surgical techniques. Total knee joint prostheses: In cooperation with Biotech Hungary, a multinational firm, the development of total knee joint prostheses and, following the acquisition of CE, qualification for the implantation into humans has already been started. So far, surgical application has been used in seven cases with continuous assessment of the result. Human resources physicians (3), assistants (2) Special instruments Additionally, for the implantation of the grafts with special regard to the hip and knee joint prostheses, a set of instruments suitable for minimal invasive techniques has been developed. 2

Products and services: Complex system of hip prostheses (cemented, cementless and revisional), Reference Centre, training in surgical techniques offered both in institutions in Hungary and abroad. Methods used Maximum 300 characters Related references (max 3) Indicate the impact factor of the cited reference Related Inventions Disclosures and Patents 3

RECOOP HST Research Activity Inventory Please complete the template for each selected project your organization would like to share with the partners of the RECOOP HST Consortium and would like to invite other organizations to write FP7 or NIH proposals. Organization Area of the Research Title of the Research Activity Department (complete address) Department of Surgery (CRC), Medical School, University of Pécs, H-7643 Pécs, Ifjúság u. 13, Hungary Department of Surgery (CRC) Medical School Minimal invasive surgery, medical technology, biomechanics, biomedical engineering and medicines, OPRA technique, new laparoscopic devices, haemostatics, vascular stapler Principal Investigator or Head of the Research Group Name: Prof. Dr. WÉBER, György Title: Prof. Dr Tel: +36 72 536496 Fax: +36 72 536496 E-mail: gyorgy.weber@aok.pte.hu Web: http://www.proszilomed.hu Abstract Maximum 500 characters Research area 1 Development and clinical investigation of different minimal invasive surgical and vascular surgical interventions. 2 Investigation of biomechanical features of the abdominal wall. Pathomechanism of incisional and groin hernia, therapeutic possibilities. Development and clinical investigation of silicone covered polypropylene mesh (patent pending). 3 Evaluation of hemodynamic and morphological features of a vascular stenosis. Analysis of different diagnostical and therapeutic possibilities in vascular disease. Histological investigation of graft incorporation and endoluminal reconstruction. 4 Complex rehabilitation of lower extremities amputees. Development and clinical introduction of OPRA technique (Osseointegrated Prostheses for the Rehabilitation of Amputees). 5 Organize and conduct of multicenter, prospective, randomized studies Human resources surgeons (3), residents (2), PhD students (3) and a lot of independent co-workers Special instruments Possibilities to perform clinical investigations at the Department of Surgery, Faculty of General Medicine, University of Pécs, high tech laser technology in the South-Trans- Danubian Cooperative Research Centre of University of Pécs and technical support of Proszilomed Ltd. Products and services Silicone-covered polypropylene mesh Osseointegrated Prostheses for the Rehabilitation of Amputees (OPRA technique) 4

New laparoscopic devices (hemostatics, vascular stapler etc.) Methods used Maximum 300 characters Related references (max 3) Indicate the impact factor of the cited reference Related Inventions Disclosures and Patents Patent: Surgial net silicon laminating for surgery (applicants: inventors) 5