(informative) List of EN (European Norm) packaging machinery standards

AMERICAN NATIONAL STANDARD ANSI/PMMI B155.1-2016 Annex L (informative) List of EN (European Norm) packaging machinery standards The following European Norms (standards) or clauses within the standards may apply to packaging machinery if the supplier chooses to use them. This is consistent with the EU interpretation of clause 6.3.2 of ISO Guide 78:2008: When of this type-c standard are different from those which are stated in type-a or B standards, the of this type-c standard take precedence over the of the other standards for machines that have been designed and built according to the of this type-c standard. The key wording is that have been designed and built according to the of this type-c standard. Compliance to the EU machinery directive 2006/42/EC does not require the supplier to use type-c standards. However if a type-c standard is used and listed on the Declaration of Conformity the machine must be compliant to the listed standards. The EU Machinery Directive requires the supplier to meet the essential health and safety contained in Annex 1 of the directive. EN 415-1:2014 - Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment EN 415-2:1999 Packaging machines safety - Part 2: Pre-formed rigid container packaging machines EN 415-3:1999+A1:2009 Safety of packaging machines - Part 3: Form, fill and seal machines EN 415-4:1997 Safety of packaging machines - Part 4: Palletizer and Depalletizer EN 415-5:2006+A1:2009 Safety of packaging machines - Part 5: Wrapping machines EN 415-6:2013 Safety of packaging machines - Part 6: Pallet wrapping machines EN 415-7:2006+A1:2008 - Safety of packaging machines - Part 7: Group and secondary packaging machines EN 415-8:2008 - Safety of packaging machines - Part 8: Strapping machines EN 415-9:2009 - Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3 EN 415-10:2014 Safety of packaging machines Part 10: General Informative Note: - ISO, IEC and most EN standards are available from the ANSI Standards Store at http://webstore.ansi.org. ISO Committee ISO TC 199 Safety of Machinery NO = ISO Technical Committee NO = ISO Technical committee CEN Committee CEN TC 114 Safety of Machinery CEN TC 146 Packaging Machinery CEN TC 153 Hygiene Link to the EU directives http://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/machinery/index_en.htm Copyright 2016 PMMI All rights reserved 89

AMERICAN NATIONAL STANDARD ANSI/PMMI B155.1-2016 Annex M (Informative) List of some of the type C Harmonized standards under the EU machinery directive for food processing, plastic and paper manufacturing. Source http://ec.europa.eu/growth/single-market/european-standards/harmonisedstandards/machinery/index_en.htm Food Processing EN 453:2014 Food processing machinery - Dough mixers - Safety and hygiene EN 454:2014 Food processing machinery - Planetary mixers - Safety and hygiene EN 1539:2009 Dryers and ovens, in which flammable substances are released - Safety EN 1672-2:2005+A1:2009 Food processing machinery - Basic concepts - Part 2: Hygiene EN 1673:2000+A1:2009 Food processing machinery - Rotary rack ovens - Safety and hygiene EN 1674:2015 Food processing machinery - Dough sheeters - Safety and hygiene EN 1678:1998+A1:2010 Food processing machinery - Vegetable cutting machines - Safety and hygiene EN 12041:2014 Food processing machinery - Moulders - Safety and hygiene EN 12042:2014 Food processing machinery - Automatic dough dividers - Safety and hygiene EN 12043:2014 Food processing machinery - Intermediate provers - Safety and hygiene EN 12267:2003+A1:2010 Food processing machinery - Circular saw machines - Safety and hygiene EN 12268:2014 Food processing machinery - Band saw machines - Safety and hygiene EN 12355:2003+A1:2010 Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene EN 12463:2004+A1:2011 Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene EN 12505:2000+A1:2009 Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene EN 12852:2001+A1:2010 Food processing machinery - Food processors and blenders - Safety and hygiene EN 12853:2001+A1:2010 Food processing machinery - Hand-held blenders and whisks - Safety and hygiene EN 12854:2003+A1:2010 Food processing machinery - Beam mixers - Safety and hygiene EN 12855:2003+A1:2010 Food processing machinery - Rotating bowl cutters - Safety and hygiene EN 12984:2005+A1:2010 Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety and hygiene EN 13208:2003+A1:2010 Food processing machinery - Vegetable peelers - Safety and hygiene EN 13288:2005+A1:2009 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene EN 13289:2001+A1:2013 Pasta processing plants - Dryers and coolers - Safety and hygiene EN 13378:2001+A1:2013 Pasta processing plants - Pasta presses - Safety and hygiene EN 13379:2001+A1:2013 Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene EN 13389:2005+A1:2009 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene EN 13390:2002+A1:2009 Food processing machinery - Pie and tart machines - Safety and hygiene EN 13570:2005+A1:2010 Food processing machinery - Mixing machines - Safety and hygiene EN 13591:2005+A1:2009 Food processing machinery - Fixed deck oven loaders - Safety and hygiene EN 13621:2004+A1:2010 Food processing machinery - Salad dryers - Safety and hygiene EN 13732:2013 Food processing machinery - Bulk milk coolers on farms - Requirements for performance, safety and hygiene Copyright 2016 PMMI All rights reserved 90

AMERICAN NATIONAL STANDARD ANSI/PMMI B155.1-2016 EN 13870:2015 Food processing machinery - Portion cutting machines - Safety and hygiene EN 13871:2014 Food processing machinery - Cubes cutting machinery - Safety and hygiene EN 13885:2005+A1:2010 Food processing machinery - Clipping machines - Safety and hygiene EN 13886:2005+A1:2010 Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene EN 13954:2005+A1:2010 Food processing machinery - Bread slicers - Safety and hygiene EN 14655:2005+A1:2010 Food processing machinery - Baguette slicers - Safety and hygiene EN 14957:2006+A1:2010 Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene EN 14958:2006+A1:2009 Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene EN 15774:2010 Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, cannelloni, ravioli, tortellini, orecchiette and gnocchi) - Safety and hygiene Bulk Storage EN 617:2001+A1:2010 Continuous handling equipment and systems - Safety and EMC for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers EN 618:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC for equipment for mechanical handling of bulk materials except fixed belt conveyors EN 619:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC for equipment for mechanical handling of unit loads EN 620:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC for fixed belt conveyors for bulk materials Thermoprocessing EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment - Part 1: Common safety for industrial thermoprocessing equipment EN 746-2:2010 Industrial thermoprocessing equipment - Part 2: Safety for combustion and fuel handling systems EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment - Part 3: Safety for the generation and use of atmosphere gases EN 1547:2001+A1:2009 Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment Converting Machinery - Paper EN 1010-1:2004+A1:2010 Safety of machinery - Safety for the design and construction of printing and paper converting machines - Part 1: Common EN 1010-2:2006+A1:2010 Safety of machinery - Safety for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery EN 1010-3:2002+A1:2009 Safety of machinery - Safety for the design and construction of printing and paper converting machines - Part 3: Cutting machines EN 1010-4:2004+A1:2009 Safety of machinery - Safety for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines EN 1034-1:2000+A1:2010 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 1: Common EN 1034-2:2005+A1:2009 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 2: Barking drums EN 1034-3:2011 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders EN 1034-4:2005+A1:2009 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities EN 1034-5:2005+A1:2009 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 5: Sheeters Copyright 2016 PMMI All rights reserved 91

AMERICAN NATIONAL STANDARD ANSI/PMMI B155.1-2016 EN 1034-6:2005+A1:2009 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 6: Calender EN 1034-7:2005+A1:2009 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 7: Chests EN 1034-8:2012 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 8: Refining plants EN 1034-13:2005+A1:2009 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units EN 1034-14:2005+A1:2009 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 14: Reel splitter EN 1034-16:2012 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines EN 1034-17:2012 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 17: Tissue making machines EN 1034-21:2012 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 21: Coating machines EN 1034-22:2005+A1:2009 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 22: Wood Grinders EN 1034-26:2012 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 26: Roll packaging machines EN 1034-27:2012 Safety of machinery - Safety for the design and construction of paper making and finishing machines - Part 27: Roll handling systems Converting Machinery Plastic and Rubber EN 1114-1:2011 Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety for extruders EN 1114-3:2001+A1:2008 Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety for haul-offs EN 1612-1:1997+A1:2008 Plastics and rubber machines - Reaction moulding machines - Part 1: Safety for metering and mixing units EN 12012-1:2007+A1:2008 Plastics and rubber machines - Size reduction machines - Part 1: Safety for blade granulators EN 12012-3:2001+A1:2008 Plastics and rubber machines - Size reduction machines - Part 3: Safety for shredders EN 12301:2000+A1:2008 Plastics and rubber machines - Calenders - Safety EN 12409:2008+A1:2011 Plastics and rubber machines - Thermoforming machines - Safety EN 13418:2013 Plastics and rubber machines - Winding machines for film or sheet - Safety Copyright 2016 PMMI All rights reserved 92

AMERICAN NATIONAL STANDARD ANSI/PMMI B155.1-2016 Annex N (Informative) Standards Visual Mapping (from ANSI B11.0 Annex K) There are many standards that apply to the safety of machinery. This Annex contains a visual presentation of many of the more common Type-B standards used in the safe design and use of machinery across various world regions. The reader is cautioned that this listing is not comprehensive, nor is it intended to imply a direct correlation between similar standards in different regions. Other standards may apply to a specific machine or application. The information contained in this annex was current as of the date of publication. Copyright 2016 PMMI All rights reserved 93