Guidance on conditions of assessment for coursework

Similar documents
Accounting Project General assessment information

Modern Languages Portfolio Analysis of literature, media or language in work General assessment information

Classical Studies Assignment General assessment information

Modern Studies Assignment General assessment information

Guidance for the Implementation of Graded Units in Higher National Certificates and Diplomas

National 5 Religious, Moral and Philosophical Studies Assignment General assessment information

Psychology Assignment General assessment information

Media Assignment General assessment information

Media Assignment General assessment information

English Project dissertation General assessment information

Quality Assurance of Assessment Arrangements in Internal and External Assessments: Information for Colleges

Guide to Reasonable Adjustments in Regulated Qualifications

Business Management Assignment General assessment information

Care Project General assessment information

Higher National Unit specification: general information. Graded Unit 3

National 5 Art and Design Expressive portfolio Assessment task

Assessor s Guidelines for SVQ3 Designing Water Networks SCQF level 6 (GA1J 23)

Higher National Unit specification: general information. Graded Unit title: Travel and Tourism: Graded Unit 1

Systems and Qualification Approval Guide

Assessment Guidance: Diploma in Sewerage and Drainage Operations

Dance Practical activity General assessment information

A Guide for Standard Setting Organisations

SAFETY QUALITY TECHNOLOGY. SQA Guidance Booklet (214)

Internal verification:

This Unit is suitable for candidates who have no previous experience of event organisation.

Graded Unit Title: Electronic Engineering: Graded Unit 2

Physics Assignment General assessment information

Hospitality: Practical Cake Craft Practical Activity General assessment information

Higher National Unit specification: general information. Graded Unit title: Creative Printmaking: Graded Unit 1

Higher National Unit specification: general information. Graded Unit 2

Biology Assignment General assessment information

Higher National Graded Unit Specification. General Information for Centres. Graded Unit Title: Mechatronics: Graded Unit 2. Graded Unit Code: DX3J 35

Biology Assignment General assessment information

Graded Unit Title: Quantity Surveying: Graded Unit 2

Unit title: Renewable Energy Systems: Microgeneration Systems

UNIT Market Operations and the Scottish Economy (SCQF level 5)

Systems and Qualification Approval Guide

Workplace Core Skills: Communication

Professional and Legal Issues for Web and Digital Content Developers (SCQF level 8)

GENERAL COMPETENCE FOR UNIT: Identifying the principles of advanced food and beverage service and demonstrating appropriate practical skills.

Higher National Unit specification: general information. Graded Unit 1

Petroleum Process Technology, Operations and Control: Graded Unit 2

Higher National Unit Specification. General information for centres. Quality Management: An Introduction. Unit code: DT8Y 34

Guide to Systems Verification for centres

SQA Equality Strategy

Creative Digital Media: Production Project

Higher National Unit Specification. General information for centres. Facilities Layout and Analysis. Unit code: DT5N 35

Confirm Work Activities and Resources for the Work (SCQF level 6)

Information and the Internet: Introduction

Unit title: Financial Services Regulatory Framework (SCQF level 8)

UNIT Media: Directing a Single Camera Production (SCQF level 6)

Higher National Unit Specification. General information for centres. Unit title: Engineering Measurement. Unit code: DT9R 34

Higher National Unit Specification. General information for centres. Unit title: Shorthand as a Skill (Speed Development 2) Unit code: DE29 35

Physics Assignment General assessment information

Unit title: Travel and Tourism: Employability (National 5)

Graded Unit title: Digital Media for Design and Print: Graded Unit 2

1 National Unit credit at SCQF level 5: (6 SCQF credit points at SCQF level 5*)

Unit title: Radio Production 1: Analysing and Producing Radio Programmes

Higher National Unit specification: general information. Graded Unit title: Travel and Tourism: Graded Unit 1

Higher National Graded Unit Specification. General information for centres. Graded Unit title: Make-up Artistry: Graded Unit 2

GCSE Teacher Guidance Leisure and Tourism Controlled Assessment. Unit 2: Customer Service in the Leisure and Tourism Industry

Higher National Project-based Graded Unit Specification

Developing Employability Skills in Construction and Engineering (Access 3) COURSE Practical Experiences: Construction and Engineering (Access 3)

Dance Practical activity General assessment information

Classics. Classical Civilisation Guide to Controlled Assessment J280/J080 GCSE. Version 1 October

Unit title: Bricklaying: Half Brick Walling (SCQF level 6)

Higher National Unit specification: general information. Graded Unit 3

Higher National Unit Specification. General information for centres. Mechanical Engineering Principles. Unit code: DV9G 34

Graded Unit title: Fashion Design and Manufacture: Graded Unit 2

WJEC LEVEL 1/2 AWARD IN RETAIL BUSINESS INTERNAL SAMPLE ASSESSMENT UNIT 1: CUSTOMER EXPERIENCE

Conform to General Workplace Health, Safety and Welfare (SCQF level 6)

Higher National Unit specification: general information

SECTION 1 INTRODUCTION... 3 SECTION 2 POLICY... 4 SECTION 3 PROCEDURE... 5

UNIT Business and Marketing: An Introduction (SCQF level 4)

Assessment: A Guide for Centres offering Regulated Qualifications

SQA Corporate Plan

1 Assessor guidance. Additional Conditions of Use (Assessment Materials)

Administration and Medical Secretarial

UNIT Art and Design: Expressive Drawing (SCQF level 6)

Higher National Group Award Graded Unit Specification

Higher National Graded Unit specification General information for centres Graded Unit title: Graded Unit code Type of Graded Unit

Unit title: Media: Understanding the Creative Process (SCQF level 6)

Professional Development: Leadership for Performance Improvement

Unit title: Offset Lithographic Machine Printing: Two Colour Text and Line (SCQF Level 6)

Level 6 Diploma in Occupational Safety and Health Unit 3 Assignment Guidance

On successful completion of the unit the learner will be able to:

National Unit Specification: general information. UNIT Creative Project (SCQF level 6) CODE F58F 12 SUMMARY OUTCOMES RECOMMENDED ENTRY

Higher National Unit specification. General information for centres. Unit code: F1N4 34

Higher National Unit Specification. General information for centres. Unit title: Business Contractual Relationships. Unit code: DE3F 34

Graded Unit Title: Beauty Therapy: Grade Unit 1

While entry is at the discretion of the centre, candidates would normally be expected to have attained one of the following, or equivalent:

National 5 Economics Assignment Assessment task

Advanced Higher Accounting Course Assessment Specification (C700 77)

Scottish Qualifications Authority

Higher National Unit Specification. General information for centres. Unit code: F19W 35

Unit title Assess, Manage and Monitor Risk in a Business Environment SQA code H67B 04. SCQF level 7. SCQF credit 5 points SSC ref Unit 40

Practical Assignment. National Course Assessment Automotive Engineering Intermediate 2 C01S 11. 1st Edition: April 2001.

Unit title: Construction Crafts: Associated Subjects (SCQF level 6)

UNIT Inspection and Testing of Electrical Installations (SCQF level 5)

Economics 1: Micro and Macro Theory and Application

Transcription:

Guidance on conditions of assessment for coursework This document provides guidance for teachers and lecturers. This edition: June 2017, version 1.0 Published by the Scottish Qualifications Authority The Optima Building, 58 Robertson Street, Glasgow G2 8DQ Lowden, 24 Wester Shawfair, Dalkeith, Midlothian EH22 1FD www.sqa.org.uk The information in this publication may be reproduced in support of SQA qualifications. If it is reproduced, SQA should be clearly acknowledged as the source. If it is to be used for any other purpose, then written permission must be obtained from permissions@sqa.org.uk. It must not be reproduced for trade or commercial purposes. Scottish Qualifications Authority 2017

Purpose This document is for teachers and lecturers delivering National Courses and aims to provide clarification and exemplification on acceptable conduct during coursework assessments. For session 2017 18 onwards, the following subheadings have been included in the National 5 course specification documents to provide additional clarity: time resources reasonable assistance supervision, control and authentication volume Higher and Advanced Higher course specifications will be updated in 2018 and 2019, respectively.

Introduction This document provides strengthened guidance for teachers and lecturers on the conditions of assessment used by SQA to ensure the validity, reliability and fairness of its coursework assessments. To ensure equity and fairness for all candidates, it is essential that the specified conditions are consistently applied in all centres. This ensures that reliable assessment decisions are made in centres delivering National Courses, and the standard and credibility of the qualifications are maintained. The subject-specific documentation, eg the course specification and the coursework assessment task will provide detailed instructions about the assessment conditions which must be applied to each qualification at each level. These documents must be consulted as this will provide the specific conditions for assessment that must be applied to each subject, at each level. The individual needs of learners should be taken into account when planning learning experiences, selecting assessment methods or considering alternative evidence. Coursework assessments have been designed to ensure that there are no unnecessary barriers to assessment. Assessments have been designed to promote equal opportunities while maintaining the integrity of the qualification. Guidance on assessment arrangements for disabled learners and/or those with additional support needs is available on the Assessment Arrangements web page: www.sqa.org.uk/sqa/14977.html. Centres are expected to advise candidates on coursework assessment before controlled coursework assessment work begins. This may include: sources of information relevance of materials from learning and teaching structure of the response techniques of data collection techniques of data presentation skills of analysis and evaluation health and safety considerations Version 1.0 1

Conditions of assessment Time and Volume It is the centre s responsibility to inform candidates about the time involved in an assessment, eg start and finish dates, and the maximum time allowed. Assessment method Time and Volume Assignment Project Case study Practical activity For assessment methods which require the preparation of materials, setting up of equipment, gathering of information etc and where it is not possible to distinguish between preparation for assessment and actual assessment, then eight hours should be taken as a notional guide to the time needed for preparation. The eight hours should include time for any final stage of assessment, such as a write-up or production of a final product. Subject-specific documentation will indicate when a timed write-up is required and the time permitted for this. The appropriate assessment time and word count will vary from subject to subject depending on what is being assessed. It is likely to increase from level to level, and reflect time allocations and marking weightings. If a word count is specified, candidates will be instructed to record their word count (excluding footnotes, references or appendices). Exceeding the word count specified in the subject-specific documentation will incur a penalty. Portfolio Portfolios will be produced by candidates over a period of time. The material to be pulled together could include artefact(s)/folder of work done in class/process skills checklists, oral responses/audio/film evidence. Once candidates have submitted their evidence, this must not be changed by either the teacher or candidate. In some subjects, the nature of the skills to be assessed will mean that it is necessary to specify the amount of evidence required by indicating a page limit; this will also help manage quantity and portability of evidence. In some instances a word count will apply. Teachers and lecturers must ensure they have checked the subject-specific documentation since exceeding the specified word count will incur a penalty. Version 1.0 2

Performance At all levels, performances are likely to be short, and specified in minimum and maximum minutes. Performance may include planning and preparation stages and will usually also include a requirement for reflection/evaluation. Should a performance require preparation time which cannot be separated out from teaching and learning activities, eight hours notional time can be allowed for preparation and assessment activity. Teachers and lecturers must make clear to candidates that when the word count exceeds the maximum by more than 10% a penalty will be applied. Resources Candidates may have access to differing levels of resources during their coursework assessment. Subject-specific documentation includes information on the permitted resources. Subject-specific documents list three levels of resource access: Free access to resources (open book) In many of the assessment methods for coursework, an open book approach to resources should be taken at some stages of the assessment. It is likely to be the case during planning and preparation stages that prepare candidates for any final write-up, practical activity, performance etc. In a minority of coursework assessments, candidates are permitted access to open resources throughout their assessment. Access to defined resources In some subjects candidates may have access to materials other than the assessment instrument itself. Examples of such permitted materials might include a dictionary or prepared notes, such as a Resource Sheet. These must never contain a pre-prepared write-up. Subject-specific documentation provides details of permitted materials; this should include the type (eg book, notes, tables), the amount (eg 200 words of notes, two textbooks) and any more specific information on the materials (eg a French dictionary). Teachers and lecturers must check subject-specific documentation to identify the resources which are permitted in their subject. Closed-book conditions Under closed-book conditions, no materials other than the assessment instrument are available to candidates. (However, the assessment instrument may contain, for example, a vocabulary list or a data sheet.) Markers will continue to highlight to SQA any instances where they suspect the assessment conditions have not been applied. Version 1.0 3

Reasonable assistance Centres must ensure that candidates receive assistance which is in line with the examples provided below. The term reasonable assistance is used to try to balance the need for support with the need to avoid giving too much assistance. Teachers and lecturers must be careful that the integrity of the assessment is not compromised. Centres must not provide model answers or writing frames specific to the task (such as outlines, paragraph headings or section headings) unless the subject-specific documentation states otherwise. Type of reasonable assistance Selection of a task or topic Examples Assessor input and advice on the selection of a task/topic is appropriate before the candidate actually embarks on the task, unless the requirements state that the candidate has to select the task/topic without assistance. Once work on the assessment has begun, then the candidate must be working autonomously. Advice on alternative sources If resources for an assessment are unavailable, it may be appropriate for the assessor to discuss a series of options on alternative sources. Example: a candidate is conducting an investigation and has attempted to find a secondary source in the centre s learning resource centre but the source is not available. In this case the assessor could discuss with the candidate a series of options on alternative ways of sourcing these documents, eg specialist internet searches, or alternative sources to the documents. Clarification Drawing out or teasing out points without leading candidates Clarification may be sought by candidates because of the wording of a brief or specification. The assessor could discuss the parameters of what would be acceptable. For example, a brief or specification may instruct the candidate to investigate a local employer. A candidate may ask for clarification of local. Normally, this should be clear from the assessment task but if it is not, the assessor could discuss the parameters of what would be acceptable. It may be that in cases where clarification is needed by one candidate, this could be extended to the whole class group. This is broad guidance which lies somewhere between clarification and exploring options. Candidates sometimes get stuck at a particular part of a task. In such cases, an assessor could assist by raising other questions that make the candidates think about the original problem, therefore giving them the opportunity to answer their own questions without supplying the actual answers. Version 1.0 4

Exploring options with a candidate Asking candidates to re-read or check something previously taught Arranging introductions, access, proof of identity Arranging access to facilities, workshops, specialist equipment Appropriate supervision Example: a candidate is working on a practical activity and is faced with more than one possible solution to a problem. The assessor could offer the candidate the opportunity to discuss each option available and the pros and cons of each, and then ask the candidate to decide on a solution based on the discussion. In this way the assessor is not telling the candidate what to do but is facilitating the thought process to enable the candidate to work towards an appropriate choice. Example: a candidate is working on a case study, which involves analysing and interpreting and making decisions on the information given. The candidate is having difficulty analysing the information in the case study. The assessor may refer the candidate back to a previous part of the learning programme which covered relevant material or skills that would help in the analysis. This would not be appropriate where the assessment takes place under a high degree of supervision and control. Centre staff may need to set up initial contacts to provide access for a candidate to a workplace experience visit, a particular group etc. Example: a candidate carrying out a practical assignment may need access to a workplace environment. It may be that because of health and safety requirements, the initial approach can only be made by the teacher or lecturer. They may have to set up the initial contact but thereafter all arrangements are made by the candidate, eg when they are attending and what they will do if this is part of the assessment or considered an important part of the learning experience. Candidates may need access to specific facilities or specialist equipment within the centre, eg access to a science laboratory. This may have to be arranged by the teacher or lecturer. It may be the case that for health and safety reasons etc, the teacher or lecturer may need to be present when a particular room or piece of equipment is being used. This does not mean that the teacher or lecturer should interfere or offer guidance on the on-going work the candidate is undertaking, unless intervention is required to prevent injury or to prevent damage to equipment or resources. Teachers and lecturers must understand the term reasonable assistance and must ensure that the correct assessment conditions are applied. Version 1.0 5

If any candidates require more than what is deemed to be reasonable assistance, they may not be ready for assessment or it may be that they have been entered for the wrong level of qualification. Supervision, control and authentication All assessment practices must be in line with SQA s general guidelines and policies on authentication, (see SQA s Guide to Assessment and also Coursework Authentication a Guide for Teachers and Lecturers).Teachers and lecturers also need to be clear on the specific conditions of assessment for their relevant National Course. Supervision Centres must ensure that candidates understand what they need to do to comply with the instructions for controlled assessments. There are two levels of supervision and control specified in the subject-specific documentation. Under a high degree of supervision and control the use of resources is tightly prescribed all candidates are within direct sight of the teacher or lecturer throughout the session(s) display materials which might provide assistance are removed or covered there is no access to e-mail, the internet or mobile phones candidates complete their work independently interaction with other candidates does not occur no assistance of any description is provided Under some supervision and control candidates do not need to be directly supervised at all times the use of resources, including the internet, is not tightly prescribed the work an individual candidate submits for assessment is their own teachers and lecturers can provide reasonable assistance, as detailed above If the candidate is likely to have contact with professionals outwith the centre, the teacher or lecturer must make it clear what role they can take in supporting and/or authenticating the candidate s work. Authentication procedures Teachers and lecturers should be sufficiently familiar with the candidate s general standard to judge whether the piece of work submitted is within their capabilities. Each candidate must sign a declaration to confirm that the work they submit for final assessment is their own unaided work (see example provided in Your Coursework). Version 1.0 6

Involvement of parents and carers Centres should make parents and carers aware of their responsibility in ensuring a fair and reliable assessment. For example, parents and carers could encourage the candidate to spend time on their coursework and to think about it as early as possible. They could discuss the planning and timing of the work. Teachers and lecturers could encourage parents and carers to provide the candidate with access to resource materials and discuss the coursework with them. However, they must be made aware that they must not give direct advice on what should or should not be included. Group work Group work provides many positive benefits to candidates by promoting collaborative working practices balanced with opportunities for individual, independent and autonomous contributions to the work of the group. However, it is important that teachers and lecturers are clear that if they are using group work approaches they need to be able to make an accurate assessment of each individual candidate s contribution to the work of the group. Candidates must actively participate in group activity and teachers and lecturers must ensure that any evidence from that activity is the candidate s own. Definition of plagiarism and collusion SQA defines plagiarism as: Plagiarism Collusion Failing to acknowledge sources properly and/or submitting another person s work as if it were your own. Copying work from another candidate and/or working collaboratively with other candidates on an individual task. Examples of plagiarism Buying an essay from an internet site (also known as an essay bank or a paper mill ). Getting someone else to do the work for them. Giving false information about a source used in coursework. Copying and pasting from the internet without citing the source. Copying directly from a textbook without citing the source. Copying sections from a friend. Omitting quotation marks from quotations. Paraphrasing without including reference to the source of the paraphrase. The most effective way to help candidates avoid being accused of plagiarism is to spend as much time as possible discussing the issue (including the risks and pitfalls), and by teaching basic writing and research skills. This shouldn t be a one-off lesson, but should be an ongoing and iterative development. Teachers must also be aware of what would constitute malpractice in their own centre, as outlined below. Version 1.0 7

Malpractice Malpractice is a serious matter. In the first instance any concerns around malpractice should be highlighted to your line manager. Candidate malpractice Candidate malpractice means any type of malpractice by a candidate which threatens the integrity of an examination or assessment. The following are examples of candidate malpractice, but you should be vigilant to other instances of suspected malpractice that may undermine the integrity of qualifications. Examples could include: collusion with others when an assessment must be completed by individual candidates prohibited items physical possession of prohibited materials (including mobile phones, electronic devices and handwritten notes etc) during a controlled assessment copying from another candidate (including using ICT to do so) and/or working collaboratively with other candidates on an individual task plagiarism failure to acknowledge sources properly and/or the submission of another person s work as if it were the candidate s own Centre malpractice Centre malpractice means any type of malpractice by a centre, or someone acting on its behalf (for example an assessor), which threatens the integrity of an examination or assessment. Failure to apply specified SQA assessment conditions in assessments, such as limits on resources or time available to candidates to complete their assessments would be considered to be centre malpractice. SQA reserves the right to consider other instances of suspected centre malpractice which may undermine the integrity of our qualifications. Further information The procedures for dealing with incidents of candidate malpractice in examinations and centre malpractice can be found in Malpractice: Information for centres: www.sqa.org.uk/informationforcentres. Version 1.0 8